As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of ai...As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.展开更多
Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network ana...Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network analyzer. The results show that electromagnetic shielding effectiveness of Ni-P-La alloy coating varies from 45 dB to 70 dB with the variety of the frequency from 10 MHz to 350 MHz. Corrosion of the salt fog impacts on the electromagnetic shielding effectiveness a little. A small amount of rare earth added to plating bath can not only enhance corrosion resistance of coating, but make electromagnetic shielding effectiveness increase by 1 ~ 5 dB.展开更多
Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects...Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.展开更多
The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on...The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on special instrument made by ourselves. The results of test show that the fabric with different inlaid distances of metal fibres and the testing angle between electric field plane and parallel metal fibres of have obvious effect on the shielding effectiveness of electromagnetic wave.展开更多
Magnetic shielding is very important in the design of a high-power dc comparator. This paper addressed the application of magnetic circuit method to calculate the magnetic shielding effectiveness of high-power dc comp...Magnetic shielding is very important in the design of a high-power dc comparator. This paper addressed the application of magnetic circuit method to calculate the magnetic shielding effectiveness of high-power dc comparators when an external radial magnetic field is added. The mathematical relationship between the magnetic shielding effectiveness and the parameters of the magnetic shielding body were obtained. To verify the validity of the calculation method, we developped a procedure to measure the magnetic shielding effectiveness of the magnetic body by measuring the induction voltage of the detection winding instead of the magnetic intensity at a point in the magnetic shielding body, making the manipulation much easier. The result calculated with the magnetic circuit method turns out to be closer to the measured one compared with that calculated with a conventional algorithm proposed by Ren, suggesting that the magnetic circuit method is an applicable tool for estimating the toroidal cavity magnetic shielding effectiveness of a heavy current comparator when a radial magnetic field is added.展开更多
There are magnetic interference problems in the applications of DC current comparator. Analysis on the magnetic effectiveness which is applied by the external magnetic field is introduced in this paper. The effectiven...There are magnetic interference problems in the applications of DC current comparator. Analysis on the magnetic effectiveness which is applied by the external magnetic field is introduced in this paper. The effectiveness is proved by the actual results which are compared with the magnetic- circuit method and the finite element method. In addition, the reference comment is given which can be used in the practical work of DC current comparator shield design.展开更多
The paper presents the synthesis and characterization of carbon black/silicone dioxide hybrid fillers obtained by an impregnation technology. The electromagnetic interference shielding effectiveness of the composites ...The paper presents the synthesis and characterization of carbon black/silicone dioxide hybrid fillers obtained by an impregnation technology. The electromagnetic interference shielding effectiveness of the composites filled with carbon black/silicone dioxide hybrid fillers was measured in wide frequency range of 1 - 12 GHz. The dc and ac electrical conductivity of composites also have been investigated. The relationship between electrical (dc and ac) conductivity and shielding effectiveness was analyzed. A positive correlation was found between the absorptive shielding effectiveness and ac conductivity for composites comprising conductive carbon black/silica filler, when the filler loading is above the percolation threshold.展开更多
The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg...The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg-6Zn-xY-1La-0.5Zr alloy,the large grains that did not experience dynamic recrystallization were elongated along the extrusion direction,and the small-sized dynamic recrystallized grains were distributed around the large grains.The Mg-6Zn-1Y-1La-0.5Zr alloy demonstrated a favorable balance between strength and plasticity,exhibiting ultimate tensile strength,yield strength,and elongation values of 332.3 MPa,267.3 MPa,and 16.2%,respectively.Moreover,the EMI SE within the frequency range of 30-1500 MHz changes from 79 to 110 dB,aligning with the electromagnetic shielding requirements of many high-strength applications.展开更多
In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave th...In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave the shielding fabrics with different specifications.The fabric structure,fabric areal density,number of fabric layers,embedding ratio of copper-clad wires wrapped aramid yarns(denoted as CCWWA)and embedding direction were designed,and a total of 34 different types of shielding fabrics were woven for testing.The experiments were mainly conducted to study the influence mechanism of various factors on the PF shielding effectiveness by testing the electrical conductivity and PF shielding effectiveness of the fabrics.The research results indicate that the PF shielding effectiveness improves with increasing fabric areal density and metal fiber content.The fabrics embedded with CCWWA,particularly those with bidirectional embedding,exhibit a significant enhancement in the PF shielding effectiveness,showing an increase of 8-20 dB compared to the fabrics without CCWWA.The PF shielding effectiveness varies across different fabric structures,with plain weave fabrics demonstrating the superior PF shielding effectiveness due to their compact structure.Non-conductive base fabric has minimal impact on the PF shielding effectiveness.As the number of fabric layers increases,the PF shielding effectiveness initially improves but then declines,peaking with double-layer fabrics.展开更多
Achieving the spin-exchange relaxation-free(SERF)state in atomic comagnetometers(ACMs)necessitates a stable and weak magnetic environment.This paper presents the design of a miniaturized permalloy magnetic shielding s...Achieving the spin-exchange relaxation-free(SERF)state in atomic comagnetometers(ACMs)necessitates a stable and weak magnetic environment.This paper presents the design of a miniaturized permalloy magnetic shielding spherical shell(MSSS)with minimal apertures,tailored to meet these requirements.By employing a combination of analytical solutions and finite element analysis(FEA),we achieved superior magnetic shielding while maintaining a compact form factor.The analytical solution for the shielding factor indicated that a four-layer permalloy sphere shell with optimized air gaps was necessary.A numerical analysis model of the MSSS was developed and validated using COMSOL software,confirming the suitability of the air gaps.The size,shape,and orientation of the openings in the perforated sphere shell were meticulously designed and optimized to minimize residual magnetism.The optimal structure was fabricated,resulting in triaxial shielding factors of 47619,52631,and 21739,meeting the anticipated requirements.A comparison of simulation results with experimental tests demonstrated the efficacy of the design methodology.This study has significant implications for ultrasensitive magnetic field detection devices requiring weak magnetic field environments,such as atomic gyroscopes,magnetometers,atomic interferometers,and atomic clocks.展开更多
The Shielding coefficient of superconductor in the shape of the spherical shell is derived on the basis of Maxwell's equations and London's two-liquid model. Some cases of superconductor shielding have also ...The Shielding coefficient of superconductor in the shape of the spherical shell is derived on the basis of Maxwell's equations and London's two-liquid model. Some cases of superconductor shielding have also been discussed in this paper.展开更多
fields such as lightning strike susceptibility,electromagnetic energy from radar,airborne radio frequency transmitter.To provide high-intensity radiated field protection(HIRFP)for the electric and electronic aircraft ...fields such as lightning strike susceptibility,electromagnetic energy from radar,airborne radio frequency transmitter.To provide high-intensity radiated field protection(HIRFP)for the electric and electronic aircraft system and defied the EMI effect on it,metal matrix composite was conquered.To provide the dynamic everincreasing requirement of industries,it is necessary that Al6061 metal matrix composite assisted with AL2O3 and fly ash is used to construct the aircraft to provide HIRFP.The thickness of the material can be maintained as low as possible to use it as a coating material for the aircraft surface.X-band for oblique incidence is used to measure electromagnetic and mechanical safeguarding properties of composites.Design/methodology/approach-Day by day,the applications of aerospace are becoming digital and automated.Proper shielding techniques are required to operate digital electronic devices without electromagnetic interference.It leads to a rapid rise in temperature,thermal ablation,delamination,and adverse effects on the electric and electronic aircraft system.Fly ash,a metal matrix material composite AL6061 with different percentages of reinforcement of Al_(2)O_(3),was contemplated and experimented with for mechanical properties like tensile strength,density and hardness.Findings-The obtained results compared with adjusted values and an improvement of 0.19,0.18,0.14 g/cm3 for density of MMC-1,MMC-2,MMC-3.31,11 MPa for tensile strength of MMC-1,MMC-2.24,27,23 BHN for hardness of MMC-1,MMC-2,MMC-3.With regard to the shielding effectiveness the results compared with adjusted values and obtained 11.36,14.56,19.47 dB better value than it.According to the above results,fabricated MMC’s provide superior results for a defined application like HIRFP(Surface material of aircraft).Practical implications-It can be used to protect electronic devices under a high-intensity radiated field,mainly in aircraft design to protect from lightning effect.Originality/value-For a better approximation of the signal toward the practical case,the oblique incidence was considered with a different combination of Al_(2)O_(3)and fly ash,reinforced to pure AL6061 to get better shielding and mechanical properties.展开更多
New shielding material has become an alternative to traditional metal to shield boxes from electromagnetic interferences. This article introduces the theory of transmission line method to study the shield boxes made o...New shielding material has become an alternative to traditional metal to shield boxes from electromagnetic interferences. This article introduces the theory of transmission line method to study the shield boxes made of a new sort of material, and then expands the fundamental formulas to deal with the cases of multiple holes and polarization with arbitrary angle. By means of genetic algorithms with the aid of a three dimensional simulation tool, the damping of electromagnetic resonances in enclosures is researched. The computation indicates that under resonant frequency, electromagnetic resonance results in low, even negative shielding coefficient; whereas, for the same areas, shielding effectiveness of a single hole is worse than that of multiple holes. Shielding coefficient varies when polarization angle increases, and the coupled field through the rectangular aperture with the long side parallel to the thin wire is much weaker than that with the long side vertical to the thin wire. By using the metallic-loss dielectric layer of optimized calculation on the internal surface of the cavity, the best result of resonance suppression has been realized with the same thickness of coating. Finally, according to the calculation result, suggestions for shielding are proposed.展开更多
With the aim of exploring the excellent properties of multi-walled carbon nanotubes(MWNTs)in modern composite technologies,various macrostructures of nanotubes have been developed from one to three dimensions,e.g.fibe...With the aim of exploring the excellent properties of multi-walled carbon nanotubes(MWNTs)in modern composite technologies,various macrostructures of nanotubes have been developed from one to three dimensions,e.g.fibers,networks,sheets(buckypapers)and pellets.The MWNT sheets discussed here were fabricated by a vacuum filtration procedure,a process that has potential for large-scale manufacturing.In order to further enhance the transport properties of MWNT sheets by reducing the contact resistance between nanotubes,highly conductive silver nanoparticles were introduced by an in situ photochemical reduction method.TEM analysis showed that highly acid-treated MWNTs dispersed in the presence of Triton X-100(TX-100)under UV light was a controllable processing method for preparation of a narrow size distribution of silver nanoparticles that were anchored onto the nanotubes.The free-standing MWNT/Ag nanohybrid sheets possessed a sharp increase in electrical conductivity from 27.7 to 40.0 S/cm,which consequently led to a much improved electromagnetic interference shielding effectiveness(SE).In principle,the SE could reach 3500 dB/cm with a thickness of 110µm,which matched the experimental results well.In addition,the nanohybrid sheets are robust and can be folded with a thickness of 30µm,which opens a promising way to integrate MWNT sheets into conventional composite laminates.展开更多
Silicone rubber composites filled with FeSiAI alloys and multi-walled carbon nanotubes （MWCNT）/graphite have been prepared for the first time by a coating process. The complex permittivity and permeability of the co...Silicone rubber composites filled with FeSiAI alloys and multi-walled carbon nanotubes （MWCNT）/graphite have been prepared for the first time by a coating process. The complex permittivity and permeability of the composites were measured with a vector network analyzer in a 1-4 GHz frequency range, and the DC electric conductivity was measured by a standard four-point contact method. These parameters were then used to calculate the reflection loss （RL） and shielding effectiveness （SE） of the composites. The results showed that the added MWCNT increased the permittivity and permeability of composites in the L-band, while the added graphite increased only the permittivity. The variation lies in the interactions between two carbonous absorbents. Addition of 1 wt% MWCNT enhanced the RL in the L-band （minimum -5.7 dB at 1 ram, -7.3 dB at 1.5 ram）, while the addition of graphite did not. Addition of MWCNT as well as graphite reinforced the shielding property of the composites （maximum SE 13.3 dB at 1 ram, 18.3 dB at 1.5 ram） owing to the increase of conductivity. The addition of these carbonous materials could hold the promise of enforcing the absorption and shielding property of the absorbers.展开更多
In order to investigate the electromagnetic shielding effectiveness （SE） and absorbing properties of fiber reinforced concrete, steel fiber, carbon fiber and synthetic polyvinyl alcohol （PVA） fiber reinforced conc...In order to investigate the electromagnetic shielding effectiveness （SE） and absorbing properties of fiber reinforced concrete, steel fiber, carbon fiber and synthetic polyvinyl alcohol （PVA） fiber reinforced concrete were researched. The results show that with the increase of fiber Volume fraction, the SE and trend of frequency change of corresponding fiber reinforced concrete are enhanced. When the volume content of steel fiber is 3%, the SE of concrete is above 50 dB and its frequency is above 1.8 GHz. Moreover, in the range of 8-18 GHz, steel fiber, carbon fiber and PVA fiber all can improve the microwave absorption properties of concrete. The concrete with 0.5% carbon fiber can achieve the best absorbing property, the minimum reflectivity is about -7 dB; while steel fiber optimal volume fraction is 2%. The reflectivity curve of PVA fiber reinforced concrete fluctuates with the frequency, and the minimum value of the reflectivity is below -10 dB. The results show that fiber reinforced concrete could be used as EMI（electromagnetic interference） prevention buildings by attenuating and reflecting electromagnetic wave energy.展开更多
Combined nitric acid oxidation method and polyaniline （PANI）-coated method were applied to modify the surface properties of short carbon fibers （SCF）. The electrical and mechanical properties of acrylic coatings w...Combined nitric acid oxidation method and polyaniline （PANI）-coated method were applied to modify the surface properties of short carbon fibers （SCF）. The electrical and mechanical properties of acrylic coatings with 50 wt pct PANI-coated carbon fiber were investigated by using scanning electron microscope （SEM）, UV-Vis spectrophotometer, four-probe method and the coaxial cable method. The results of the pH measurement and XPS （X-ray photoelectron spectroscopy） patterns showed that the oxygen functional groups, such as -OH and -COOH, were attached on the carbon fiber surfaces after oxidation treatment. The XPS analysis of PANl-coated oxidized SCF （PAOSCF） revealed that PANI may bond on the surface of oxidized SCF with chemical bonds. SEM images and surface roughness analyses showed that PANl-coated layer changed the surface morphology. Compared with SCF/acrylic coating, the surface resistivity of PAOSCF/acrylic coating decreased from17.1 to 5.3 Ω/sq and the shielding efficiency （SE） value increased from 1.54 to 23.3 dB.展开更多
Pyrolytic carbon （PyC） was infiltrated into silicon nitride （Si3N4） ceramics by precursor infiltration and pyrolysis （PIP） of phenolic resin, and Ni nanoparticles were added into the phenolic resin to change the...Pyrolytic carbon （PyC） was infiltrated into silicon nitride （Si3N4） ceramics by precursor infiltration and pyrolysis （PIP） of phenolic resin, and Ni nanoparticles were added into the phenolic resin to change the electric conductivity of Si3N4-PyC composite ceramics. Dielectric permittivity, electromagnetic interference （EMI） shielding and absorption properties of Si3N4-PyC composite ceramics were studied as a function of Ni content at 8.2-12.4 GHz （X-band）. When Ni nanoparticles were added into phenolic resin, the electric conductivity of the prepared composite ceramics decreased with increasing Ni content, which was attributed to the decrease of graphitization degree of PyC. The decrease in electric conductivity led to the decrease in both permittivity and EMI shielding effectiveness. Since too high permittivity is harmful to the impendence match and results in the strong reflection, the electromagnetic wave absorption property of Si3N4-PyC composite ceramics increases with increasing Ni content. When the content of Ni nanoparticles added into phenolic resin was 2 wt%, the composite ceramics possessed the lowest electric conductivity and displayed the most excellent absorption property with a minimum reflection loss as low as -28.9 dB.展开更多
Three-dimensional(3D) graphene/SiBCN composites(GF/SiBCN) were prepared by depositing SiBCN ceramics in 3D graphene foam via the chemical vapor infiltration technique. The effect of the heat treatment temperature on t...Three-dimensional(3D) graphene/SiBCN composites(GF/SiBCN) were prepared by depositing SiBCN ceramics in 3D graphene foam via the chemical vapor infiltration technique. The effect of the heat treatment temperature on the microstructure, phase composition, and electromagnetic properties of the GF/SiBCN composite was investigated. The SiBCN ceramics maintained an amorphous structure in the composite below 1400℃ above which the crystallinity of the free carbon phase gradually increased.While the Si3N4 and B4C phases started to crystallize at 1500℃ and their crystallinity increased with temperature, SiC was observed at 1700℃. The electromagnetic shielding effectiveness of GF/SiBCN increased with the heat treatment temperature.展开更多
In this study, we designed and fabricated optical materials consisting of alternating ITO and Ag layers. This approach is considered to be a promising way to obtain a light-weight, ultrathin and transparent shielding ...In this study, we designed and fabricated optical materials consisting of alternating ITO and Ag layers. This approach is considered to be a promising way to obtain a light-weight, ultrathin and transparent shielding medium, which not only transmits visible light but also inhibits the transmission of microwaves, despite the fact that the total thickness of the Ag film is much larger than the skin depth in the visible range and less than that in the microwave region. Theoretical results suggest that a high dielectric/metal thickness ratio can enhance the broadband and improve the transmittance in the optical range. Accordingly, the central wavelength was found to be red-shifted with increasing dielectric/metal thickness ratio. A physical mechanism behind the controlling transmission of visible light is also proposed. Meanwhile, the electromagnetic shielding effectiveness of the prepared structures was found to exceed 40 dB in the range from 0.1 GHz to 18 GHz, even reaching up to 70 dB at 0.1 GHz, which is far higher than that of a single ITO film of the same thickness.展开更多
基金supported by the National Natural Science Foundation of China(Nos.62101020 and 62141405)the Special Scientific Research Project of Civil Aircraft,China(No.MJZ5-2N22).
文摘As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.
基金Project supported by Anhui Province Natural Science Foundation (050440603)
文摘Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network analyzer. The results show that electromagnetic shielding effectiveness of Ni-P-La alloy coating varies from 45 dB to 70 dB with the variety of the frequency from 10 MHz to 350 MHz. Corrosion of the salt fog impacts on the electromagnetic shielding effectiveness a little. A small amount of rare earth added to plating bath can not only enhance corrosion resistance of coating, but make electromagnetic shielding effectiveness increase by 1 ~ 5 dB.
基金financially supported by the National Key R&D Program of China(2021YFB3701100)the National Natural Science Foundation of China(52225101 and 52171103)the Fundamental Research Funds for the Central Universities(2020CDJDPT001).
文摘Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.
基金This study is supported by Shaanxi Provincial Laboratory of Functional Textiles and Academy Laboratory of Xi’an University of Engineer-ing Science and Technology in Xi’an city ,P.R.Chian
文摘The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on special instrument made by ourselves. The results of test show that the fabric with different inlaid distances of metal fibres and the testing angle between electric field plane and parallel metal fibres of have obvious effect on the shielding effectiveness of electromagnetic wave.
基金Funded by the Natural Science Foundation of China under the grant number 50277018.
文摘Magnetic shielding is very important in the design of a high-power dc comparator. This paper addressed the application of magnetic circuit method to calculate the magnetic shielding effectiveness of high-power dc comparators when an external radial magnetic field is added. The mathematical relationship between the magnetic shielding effectiveness and the parameters of the magnetic shielding body were obtained. To verify the validity of the calculation method, we developped a procedure to measure the magnetic shielding effectiveness of the magnetic body by measuring the induction voltage of the detection winding instead of the magnetic intensity at a point in the magnetic shielding body, making the manipulation much easier. The result calculated with the magnetic circuit method turns out to be closer to the measured one compared with that calculated with a conventional algorithm proposed by Ren, suggesting that the magnetic circuit method is an applicable tool for estimating the toroidal cavity magnetic shielding effectiveness of a heavy current comparator when a radial magnetic field is added.
文摘There are magnetic interference problems in the applications of DC current comparator. Analysis on the magnetic effectiveness which is applied by the external magnetic field is introduced in this paper. The effectiveness is proved by the actual results which are compared with the magnetic- circuit method and the finite element method. In addition, the reference comment is given which can be used in the practical work of DC current comparator shield design.
文摘The paper presents the synthesis and characterization of carbon black/silicone dioxide hybrid fillers obtained by an impregnation technology. The electromagnetic interference shielding effectiveness of the composites filled with carbon black/silicone dioxide hybrid fillers was measured in wide frequency range of 1 - 12 GHz. The dc and ac electrical conductivity of composites also have been investigated. The relationship between electrical (dc and ac) conductivity and shielding effectiveness was analyzed. A positive correlation was found between the absorptive shielding effectiveness and ac conductivity for composites comprising conductive carbon black/silica filler, when the filler loading is above the percolation threshold.
基金supported from the National Key R&D Program of China(No.2021YFB3701100)the National Natural Science Foundation of China(No.52225101)+1 种基金the Fundamental Research Funds for the Central Universities of China(Nos.2023CDJYXTD-002,2020CDJDPT001)the Graduate Research and Innovation Foundation of Chongqing,China(No.CYB23037).
文摘The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg-6Zn-xY-1La-0.5Zr alloy,the large grains that did not experience dynamic recrystallization were elongated along the extrusion direction,and the small-sized dynamic recrystallized grains were distributed around the large grains.The Mg-6Zn-1Y-1La-0.5Zr alloy demonstrated a favorable balance between strength and plasticity,exhibiting ultimate tensile strength,yield strength,and elongation values of 332.3 MPa,267.3 MPa,and 16.2%,respectively.Moreover,the EMI SE within the frequency range of 30-1500 MHz changes from 79 to 110 dB,aligning with the electromagnetic shielding requirements of many high-strength applications.
文摘In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave the shielding fabrics with different specifications.The fabric structure,fabric areal density,number of fabric layers,embedding ratio of copper-clad wires wrapped aramid yarns(denoted as CCWWA)and embedding direction were designed,and a total of 34 different types of shielding fabrics were woven for testing.The experiments were mainly conducted to study the influence mechanism of various factors on the PF shielding effectiveness by testing the electrical conductivity and PF shielding effectiveness of the fabrics.The research results indicate that the PF shielding effectiveness improves with increasing fabric areal density and metal fiber content.The fabrics embedded with CCWWA,particularly those with bidirectional embedding,exhibit a significant enhancement in the PF shielding effectiveness,showing an increase of 8-20 dB compared to the fabrics without CCWWA.The PF shielding effectiveness varies across different fabric structures,with plain weave fabrics demonstrating the superior PF shielding effectiveness due to their compact structure.Non-conductive base fabric has minimal impact on the PF shielding effectiveness.As the number of fabric layers increases,the PF shielding effectiveness initially improves but then declines,peaking with double-layer fabrics.
基金supported by Hefei National Laboratory,Innovation Program for Quantum Science and Technology(Grant Nos.2021ZD0300500 and 2021ZD0300503).
文摘Achieving the spin-exchange relaxation-free(SERF)state in atomic comagnetometers(ACMs)necessitates a stable and weak magnetic environment.This paper presents the design of a miniaturized permalloy magnetic shielding spherical shell(MSSS)with minimal apertures,tailored to meet these requirements.By employing a combination of analytical solutions and finite element analysis(FEA),we achieved superior magnetic shielding while maintaining a compact form factor.The analytical solution for the shielding factor indicated that a four-layer permalloy sphere shell with optimized air gaps was necessary.A numerical analysis model of the MSSS was developed and validated using COMSOL software,confirming the suitability of the air gaps.The size,shape,and orientation of the openings in the perforated sphere shell were meticulously designed and optimized to minimize residual magnetism.The optimal structure was fabricated,resulting in triaxial shielding factors of 47619,52631,and 21739,meeting the anticipated requirements.A comparison of simulation results with experimental tests demonstrated the efficacy of the design methodology.This study has significant implications for ultrasensitive magnetic field detection devices requiring weak magnetic field environments,such as atomic gyroscopes,magnetometers,atomic interferometers,and atomic clocks.
文摘The Shielding coefficient of superconductor in the shape of the spherical shell is derived on the basis of Maxwell's equations and London's two-liquid model. Some cases of superconductor shielding have also been discussed in this paper.
文摘fields such as lightning strike susceptibility,electromagnetic energy from radar,airborne radio frequency transmitter.To provide high-intensity radiated field protection(HIRFP)for the electric and electronic aircraft system and defied the EMI effect on it,metal matrix composite was conquered.To provide the dynamic everincreasing requirement of industries,it is necessary that Al6061 metal matrix composite assisted with AL2O3 and fly ash is used to construct the aircraft to provide HIRFP.The thickness of the material can be maintained as low as possible to use it as a coating material for the aircraft surface.X-band for oblique incidence is used to measure electromagnetic and mechanical safeguarding properties of composites.Design/methodology/approach-Day by day,the applications of aerospace are becoming digital and automated.Proper shielding techniques are required to operate digital electronic devices without electromagnetic interference.It leads to a rapid rise in temperature,thermal ablation,delamination,and adverse effects on the electric and electronic aircraft system.Fly ash,a metal matrix material composite AL6061 with different percentages of reinforcement of Al_(2)O_(3),was contemplated and experimented with for mechanical properties like tensile strength,density and hardness.Findings-The obtained results compared with adjusted values and an improvement of 0.19,0.18,0.14 g/cm3 for density of MMC-1,MMC-2,MMC-3.31,11 MPa for tensile strength of MMC-1,MMC-2.24,27,23 BHN for hardness of MMC-1,MMC-2,MMC-3.With regard to the shielding effectiveness the results compared with adjusted values and obtained 11.36,14.56,19.47 dB better value than it.According to the above results,fabricated MMC’s provide superior results for a defined application like HIRFP(Surface material of aircraft).Practical implications-It can be used to protect electronic devices under a high-intensity radiated field,mainly in aircraft design to protect from lightning effect.Originality/value-For a better approximation of the signal toward the practical case,the oblique incidence was considered with a different combination of Al_(2)O_(3)and fly ash,reinforced to pure AL6061 to get better shielding and mechanical properties.
基金the National Natural Science Foundation of China (50237040)
文摘New shielding material has become an alternative to traditional metal to shield boxes from electromagnetic interferences. This article introduces the theory of transmission line method to study the shield boxes made of a new sort of material, and then expands the fundamental formulas to deal with the cases of multiple holes and polarization with arbitrary angle. By means of genetic algorithms with the aid of a three dimensional simulation tool, the damping of electromagnetic resonances in enclosures is researched. The computation indicates that under resonant frequency, electromagnetic resonance results in low, even negative shielding coefficient; whereas, for the same areas, shielding effectiveness of a single hole is worse than that of multiple holes. Shielding coefficient varies when polarization angle increases, and the coupled field through the rectangular aperture with the long side parallel to the thin wire is much weaker than that with the long side vertical to the thin wire. By using the metallic-loss dielectric layer of optimized calculation on the internal surface of the cavity, the best result of resonance suppression has been realized with the same thickness of coating. Finally, according to the calculation result, suggestions for shielding are proposed.
基金support from Overseas Research Scholarship Award Scheme and the University of Bristol Postgraduate Scholarship.
文摘With the aim of exploring the excellent properties of multi-walled carbon nanotubes(MWNTs)in modern composite technologies,various macrostructures of nanotubes have been developed from one to three dimensions,e.g.fibers,networks,sheets(buckypapers)and pellets.The MWNT sheets discussed here were fabricated by a vacuum filtration procedure,a process that has potential for large-scale manufacturing.In order to further enhance the transport properties of MWNT sheets by reducing the contact resistance between nanotubes,highly conductive silver nanoparticles were introduced by an in situ photochemical reduction method.TEM analysis showed that highly acid-treated MWNTs dispersed in the presence of Triton X-100(TX-100)under UV light was a controllable processing method for preparation of a narrow size distribution of silver nanoparticles that were anchored onto the nanotubes.The free-standing MWNT/Ag nanohybrid sheets possessed a sharp increase in electrical conductivity from 27.7 to 40.0 S/cm,which consequently led to a much improved electromagnetic interference shielding effectiveness(SE).In principle,the SE could reach 3500 dB/cm with a thickness of 110µm,which matched the experimental results well.In addition,the nanohybrid sheets are robust and can be folded with a thickness of 30µm,which opens a promising way to integrate MWNT sheets into conventional composite laminates.
基金supported by the National Natural Science Foundation of China (No. 50805005)the National High Technology Research and Development Program of China ("863 Program", No. 2009AA043804)+1 种基金the Foundation for the Author of National Excellent Doctoral Dissertation of PR China (No. 2007B32)the Innovation Foundation of BUAA for Ph.D. Graduates
文摘Silicone rubber composites filled with FeSiAI alloys and multi-walled carbon nanotubes （MWCNT）/graphite have been prepared for the first time by a coating process. The complex permittivity and permeability of the composites were measured with a vector network analyzer in a 1-4 GHz frequency range, and the DC electric conductivity was measured by a standard four-point contact method. These parameters were then used to calculate the reflection loss （RL） and shielding effectiveness （SE） of the composites. The results showed that the added MWCNT increased the permittivity and permeability of composites in the L-band, while the added graphite increased only the permittivity. The variation lies in the interactions between two carbonous absorbents. Addition of 1 wt% MWCNT enhanced the RL in the L-band （minimum -5.7 dB at 1 ram, -7.3 dB at 1.5 ram）, while the addition of graphite did not. Addition of MWCNT as well as graphite reinforced the shielding property of the composites （maximum SE 13.3 dB at 1 ram, 18.3 dB at 1.5 ram） owing to the increase of conductivity. The addition of these carbonous materials could hold the promise of enforcing the absorption and shielding property of the absorbers.
基金Chinese Government for Scientific Researches (No. A1420060186)Doctoral Fundation of University of Jinan(No. XBS1026)
文摘In order to investigate the electromagnetic shielding effectiveness （SE） and absorbing properties of fiber reinforced concrete, steel fiber, carbon fiber and synthetic polyvinyl alcohol （PVA） fiber reinforced concrete were researched. The results show that with the increase of fiber Volume fraction, the SE and trend of frequency change of corresponding fiber reinforced concrete are enhanced. When the volume content of steel fiber is 3%, the SE of concrete is above 50 dB and its frequency is above 1.8 GHz. Moreover, in the range of 8-18 GHz, steel fiber, carbon fiber and PVA fiber all can improve the microwave absorption properties of concrete. The concrete with 0.5% carbon fiber can achieve the best absorbing property, the minimum reflectivity is about -7 dB; while steel fiber optimal volume fraction is 2%. The reflectivity curve of PVA fiber reinforced concrete fluctuates with the frequency, and the minimum value of the reflectivity is below -10 dB. The results show that fiber reinforced concrete could be used as EMI（electromagnetic interference） prevention buildings by attenuating and reflecting electromagnetic wave energy.
文摘Combined nitric acid oxidation method and polyaniline （PANI）-coated method were applied to modify the surface properties of short carbon fibers （SCF）. The electrical and mechanical properties of acrylic coatings with 50 wt pct PANI-coated carbon fiber were investigated by using scanning electron microscope （SEM）, UV-Vis spectrophotometer, four-probe method and the coaxial cable method. The results of the pH measurement and XPS （X-ray photoelectron spectroscopy） patterns showed that the oxygen functional groups, such as -OH and -COOH, were attached on the carbon fiber surfaces after oxidation treatment. The XPS analysis of PANl-coated oxidized SCF （PAOSCF） revealed that PANI may bond on the surface of oxidized SCF with chemical bonds. SEM images and surface roughness analyses showed that PANl-coated layer changed the surface morphology. Compared with SCF/acrylic coating, the surface resistivity of PAOSCF/acrylic coating decreased from17.1 to 5.3 Ω/sq and the shielding efficiency （SE） value increased from 1.54 to 23.3 dB.
基金supported by the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University,China(No.KB200920)the Natural Science Foundation of China(No.50972119)the Programme of Introducing Talents of Discipline to Universities, China(No.B08040)
文摘Pyrolytic carbon （PyC） was infiltrated into silicon nitride （Si3N4） ceramics by precursor infiltration and pyrolysis （PIP） of phenolic resin, and Ni nanoparticles were added into the phenolic resin to change the electric conductivity of Si3N4-PyC composite ceramics. Dielectric permittivity, electromagnetic interference （EMI） shielding and absorption properties of Si3N4-PyC composite ceramics were studied as a function of Ni content at 8.2-12.4 GHz （X-band）. When Ni nanoparticles were added into phenolic resin, the electric conductivity of the prepared composite ceramics decreased with increasing Ni content, which was attributed to the decrease of graphitization degree of PyC. The decrease in electric conductivity led to the decrease in both permittivity and EMI shielding effectiveness. Since too high permittivity is harmful to the impendence match and results in the strong reflection, the electromagnetic wave absorption property of Si3N4-PyC composite ceramics increases with increasing Ni content. When the content of Ni nanoparticles added into phenolic resin was 2 wt%, the composite ceramics possessed the lowest electric conductivity and displayed the most excellent absorption property with a minimum reflection loss as low as -28.9 dB.
基金supported by the National Key Research and Development Program of China (No. 2018YFB1106600)the Chinese National Foundation for Natural Sciences under Contracts (No. 51672217, 51572224)the Fundamental Research Funds for the Central Universities (Grant no. 3102019ghxm014)
文摘Three-dimensional(3D) graphene/SiBCN composites(GF/SiBCN) were prepared by depositing SiBCN ceramics in 3D graphene foam via the chemical vapor infiltration technique. The effect of the heat treatment temperature on the microstructure, phase composition, and electromagnetic properties of the GF/SiBCN composite was investigated. The SiBCN ceramics maintained an amorphous structure in the composite below 1400℃ above which the crystallinity of the free carbon phase gradually increased.While the Si3N4 and B4C phases started to crystallize at 1500℃ and their crystallinity increased with temperature, SiC was observed at 1700℃. The electromagnetic shielding effectiveness of GF/SiBCN increased with the heat treatment temperature.
基金Project supported by the International Science&Technology Cooperation Program of China(Grant No.2014DFR10020)the Science Foundation of Shanxi Province,China(Grant Nos.201701D121050 and 201701D121007)
文摘In this study, we designed and fabricated optical materials consisting of alternating ITO and Ag layers. This approach is considered to be a promising way to obtain a light-weight, ultrathin and transparent shielding medium, which not only transmits visible light but also inhibits the transmission of microwaves, despite the fact that the total thickness of the Ag film is much larger than the skin depth in the visible range and less than that in the microwave region. Theoretical results suggest that a high dielectric/metal thickness ratio can enhance the broadband and improve the transmittance in the optical range. Accordingly, the central wavelength was found to be red-shifted with increasing dielectric/metal thickness ratio. A physical mechanism behind the controlling transmission of visible light is also proposed. Meanwhile, the electromagnetic shielding effectiveness of the prepared structures was found to exceed 40 dB in the range from 0.1 GHz to 18 GHz, even reaching up to 70 dB at 0.1 GHz, which is far higher than that of a single ITO film of the same thickness.
