The big underground powerhouse cavern of the China Baihetan hydropower plant is 438m long,34m wide,and 88.7m high.It is cut by a weak interlayer shear zone and its high sidewall poses a huge stability problem.This pap...The big underground powerhouse cavern of the China Baihetan hydropower plant is 438m long,34m wide,and 88.7m high.It is cut by a weak interlayer shear zone and its high sidewall poses a huge stability problem.This paper reports our successful solution of this problem through numerical simulations and a replacement-tunnel scheme in the detailed design stage and close site monitoring in the excavation stage.Particularly,in the detail design stage,mechanical parameters of the shear zone were carefully determined through laboratory experiments and site tests.Then,deformation of the surrounding rocks and the shear zone under high in situ stress conditions was predicted using 3 Dimensional Distinct Element Code(3DEC).Subsequently,a replacement-tunnel scheme was proposed for the treatment on the shear zone to prevent severe unloading relaxation of surrounding rocks.In the construction period,excavation responses were closely monitored on deformations of surrounding rocks and the shear zone.The effect of local cracking in the replacement tunnels on sidewall stability was evaluated using the strength reduction method.These monitoring results were compared with the predicted numerical simulation in the detailed design stage.It is found that the shear zone greatly modified the deformation mode of the cavern surrounding rocks.Without any treatment,rock mass deformation on the downstream sidewall was larger than 125mm and the shearing deformation of the shear zone was 60–70 mm.These preset replacement tunnels can reduce not only the unloading and relaxation of rock masses but also the maximum shearing deformation of the shear zone by 10–20 mm.The predictions by numerical simulation were in good agreement with the monitoring results.The proposed tunnel-replacement scheme can not only restrain the shear zone deformation but also enhance the safety of surrounding rocks and concrete tunnels.This design procedure offers a good reference for interaction between a big underground cavern and a weak layer zone in the future.展开更多
The Nyakong-Manyi Shear Zone(NMSZ) is a NE-SW elongated corridor found to the northwest of the Foumban-Bankim Shear Zone(FBSZ) along the Central Cameroon Shear Zone. Controversial chronology models has been proposed f...The Nyakong-Manyi Shear Zone(NMSZ) is a NE-SW elongated corridor found to the northwest of the Foumban-Bankim Shear Zone(FBSZ) along the Central Cameroon Shear Zone. Controversial chronology models has been proposed for the kinematic evolution of the sinistral and dextral shear phases in the Tikar Plain, thus in the FBSZ;early dextral and late sinistral shear phases for some authors and early sinistral and late dextral shear for others. Moreover, the NMSZ kinematic evolution implication on the mylonitization P-T-t path in the area seem to be problematic and the present paper aim is to clear enough those problems;since this shear zone is the main mylonitic corridor that registered the left and right lateral movement in this area. The NMSZ comprises amphibolites, protomylonites, strict sensus mylonites(garnet-kyanite-sillimanite mylonite and garnet-pyroxene mylonite), ultramylonites kyanite-sillimanite and garnet-kyanite-sillimanite gneiss. Field structures testify that the investigated area recorded three deformation phases:(i) the D1deformation phase which is marked by NW-SE to N-S trending S1metamorphic foliation with low to moderate dips(15°–45°) that was transposed during the D2phase, is responsible for a regional metamorphism whose mineral paragenesis is garnet-kyanite-sillimanite;(ii) the early sinistral NNE-SSW to NE-SW shear phase D2marked by S2metamorphic and mylonitic foliations;responsible for, L2stretching mineral lineation, F2fold axes and B2boudins structures;(iii) the late dextral NE-SW shear phase D3, characterized by F3folds, B3boudins and ductile dextral C3shear planes. Mineral paragenesis garnet + kyanite + sillimanite and microstructures within gneiss testify that this rock underwent high grade regional metamorphism whose peak conditions are estimated at 11.5–13.5 kbar/850–900 ℃. After the peak of metamorphism gneiss was overprinted by high grade pressure mylonitization during the early sinistral and late dextral shear deformations. Microstructural data here indicate a high-grade mylonitization whose P-T conditions are estimated at least at around 10 kbar/750 ℃ attained during the D2. Shear markers, indicates that the studied area underwent an intense mylonitization at deep crustal deformation level, probably at the ductile-brittle boundary structural level during a major dextral shear deformation.展开更多
Structural analyses show that the Ailaoshan-Red River shear zone （ASRRSZ） in Ailao Mountain is composed of three different deformational domains. These domains may represent three episodes of left-lateral slip exper...Structural analyses show that the Ailaoshan-Red River shear zone （ASRRSZ） in Ailao Mountain is composed of three different deformational domains. These domains may represent three episodes of left-lateral slip experienced by the ASRRSZ. The first episode of such deformation occurred throughout the eastern high-grade belt of the ASRRSZ under a transtensional regime and produced L- type tectonites of amphibolite grade. The second episode of left-lateral slip formed high strain zones overprinting the high-grade belt. Its deformational mechanism is similar to simple shear and the deformed rocks are L-S mylonites of greenschist grade. The third episode of left-lateral slip took place chiefly in a western low-grade belt of the ASRRSZ. This deformation occurred in a transpressional regime, formed an overall structure pattern of a sinistral thrust system and produced phyllonites of low-greenschist grade. Geochronological data indicated that the three episodes of left-lateral slip happened before ～58-56 Ma, at least from ～27 Ma to 22 Ma and at ～13-12 Ma respectively. The first episode of slip in the ASRRSZ appeared to correspond to the initial collision of India and Asia at ～60 Ma. The second episode took place almost at the same time as the most intensive compression and uplift in Tibet. The latest event might represent a further eastward material flow in Tibet after ～16-13 Ma. Thus, the ASRRSZ of southeastern Asia probably experienced three main episodes of Tertiary left- lateral slip in the course of intracontinental convergence since the India-Asia collision.展开更多
The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed...The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.展开更多
The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion o...The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan（DCS） high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River（ASRR） shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.展开更多
The Longquanguan shear zone is an important structural belt in the North China Craton, separating the underlying Fuping complex from the overlying Wutai complex. This shear zone has experienced three episodes of defor...The Longquanguan shear zone is an important structural belt in the North China Craton, separating the underlying Fuping complex from the overlying Wutai complex. This shear zone has experienced three episodes of deformation: the first and main episode is a ductile top-to-ESE shear along the gently northwest-west dipping foliations, while the other two episodes are later collapse sliding. Prolonged granites parallel to the shear foliations make one of the main compositions of the Longquanguan shear zone. These granites experienced deformation to form mylonitic rocks when they emplaced during the first episode of deformation. Structural characters of the granites and their contacts to the country rocks indicate that these granites possibly resulted from in-situ partial remelting by shearing, i.e., they are syn-deformational granites. Monazites in these mylonitic granites are magmatic minerals and their crystallization ages may represent ages of the magmatic events, and also the ages for the main deformation of the Longquanguan shear zone. Monazite electronic microprobe dating were carried on two samples of granite, which gives multiple peak ages, among which 1,846 Ma and 1,877 Ma are the main peak ages for the two samples. These ages represent the main deformation of the Longquanguan shear zone, which is consistent with the main regional geological event at about 1,850 Ma caused by the collision between the Eastern and Western Blocks in North China. The good match between the monazite ages and the corresponding regional tectono-thermal events shows the feasibility and reliability of monazite electronic microprobe dating.展开更多
The Jingdezhen ductile shear zone is evolved from the Neoproterozoic Zhangyuan ophiolite melange belt in the eastern Jiangnan Orogen, South China. Comprehensive study of geometry, kinematics, quartz c-axis fabric, tem...The Jingdezhen ductile shear zone is evolved from the Neoproterozoic Zhangyuan ophiolite melange belt in the eastern Jiangnan Orogen, South China. Comprehensive study of geometry, kinematics, quartz c-axis fabric, temperature-pressure conditions and geochronology were conducted in this study. The Jingdezhen shear zone extends -180 km along the NE orientation with two groups of subvertical fo- liation and subhorizontal lineation. One group of foliation strikes NEN orientation whereas another one NEE orientation. Field investigation, microscopic observation and quartz c-axis fabric show that sinistral shearing along NEN-striking foliation occurred earlier than dextral shearing along NEE-striking foliation. Syn-tectonic staurolite porphyroblasts and deformation manner of feldspar imply that sinistral shearing occurred at 530-420 ℃ and 6-2 kbar. Deformation manner and c-axis fabric of quartz and pre-tectonic staurolite porphyroblasts indicate that dextral shearing took place at 420-300 ℃. LA-ICP-MS zircon U-Pb and mica ^40Ar/^39Ar dating indicate that the sinistral shearing occurred during Neoproterozoic oro- geny （830-800 Ma） whereas the dextral shearing at 447＋12 Ma. The sinistral shearing resulted from the Neoproterozoic final assembly between the Yangtze and Cathaysia blocks. The dextral shearing was caused by Early Paleozoic orogen parallel extension and clockwise rotation.展开更多
There is a large ductile shear zone, 2 km wide and more than 350 km long, inthe South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareousmylonites. The microstructures of the ductile s...There is a large ductile shear zone, 2 km wide and more than 350 km long, inthe South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareousmylonites. The microstructures of the ductile shear zone show nearly E-W extending subverticalfoliation, horizontal and oblique stretching lineations, shearing sense from sinistral to obliquesinistral strike-slip from east to west, 'A' type folds and abundant granitic veins. Measuredlattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the graniticmylonite in the west segment suggest a strong LPO characterized by the dominant slip systems (1010) formed at high temperature (>650 deg C). K-feldspar of the mylonite shows an ^(39)Ar/^(40)Arhigh-temperature plateau age of 243.3 +- 1.3 Ma, and biotite, 250.5 +- 0.5 Ma, which represent theformation age of the ductile shear zone. The ^(39)Ar/^(40)Ar plateau ages of 169.7 +- 0.3 Ma and160.6 +- 0.1 Ma and the ^(39)Ar/^(40)Ar isochron ages of 166.99 +- 2.37 Ma and 160.6 +- 0.1 Ma ofbiotites in the mylonite represent the subsequent deformation age. These ages indicate that thisductile shear zone is similar to the Altun and South Kunlun sinistral ductile shear zones in itsages of movement, formation, reactivation and duration.展开更多
There is a coupling of thermal, mechanical, chemical and fluidal processes in a continental shear zone. Both Xincheng - Xishui and Hetai shear zones are typical continental crust shear zones of greenschist facies envi...There is a coupling of thermal, mechanical, chemical and fluidal processes in a continental shear zone. Both Xincheng - Xishui and Hetai shear zones are typical continental crust shear zones of greenschist facies environment. The representative mylonite zones of the shear zones are studied with whole rock major and trace element analyses. The chemical compositional variation tendencies in both shear zones are very similar and the gain - loss ratios of various components in the mylonitic rocks are reflected in the mass balance equations. The enrichment of those immobile high - field- strengh elements is considered to be related to the volume loss of the mylonitic rocks in a shear zone. Based on the volume loss expression Cs /Co = 1/(1- V), the fractional volume losses (V) are 37.5% and 36.5%-42.3% respectively for mylonites and ultramylonites in the Xincheng-Xishui shear zone and 11 % and 28% respectively for mylonites and phyllonites in the Hetai shear zone. The high volume loss and large removal of SiO2 from the system imply that there is a large amount of percolating fluids in the shear zones. From the SiO2 loss, the fluid/rock ratios (N) are calculated as Nmyl = 113 - 563, Nultramyl= 133-664 for the Xincheng-Xishui shear zone and Nmyl=42-208, Nphyl=110-550 for the Hetai shear zone. Such a large amount of percolating fluid must have profoundly affected the rheological behavior, chemical behavior and metallogenesis of the shear zones.展开更多
Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A s...Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi （Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015）.展开更多
Large-scale magmatism affected the Tongbai-Dabie orogenic belt during post-collisional lateral tectonic extension in the Cretaceous, which was suggested to account for the widespread deformation and migmatization in t...Large-scale magmatism affected the Tongbai-Dabie orogenic belt during post-collisional lateral tectonic extension in the Cretaceous, which was suggested to account for the widespread deformation and migmatization in the Tongbai-Dabie complexes. However, it cannot explain the most deformations in the shear zones. The northwest-southeast shear zones are developed around or wrapped the Tongbai-Dabie complexes. They play an important role for the interpretation of the tectonic evolution of the Tongbai-Dabie orogenic belt. By a systematically observation and description of the geometry and kinematics of these shear zones, we found that the shear zones to the north dip NE and have a uniform sinistral shear sense, the shear zone to the south dips SW and has a uniform dextral shear sense, and the shear zones at the core are sub-horizontal and have a uniform top-to-NW sense of shear. Combining with the comparison of previous and our geochronological studies, we interpret these associations as indicating that these shear zones were originally a single, more flat-lying and sub- horizontal shear zone with a uniform top-to-NW shear sense before the folding-doming of the Tongbai- Dabie complexes and suggest that the Tongbai-Dabie orogenic belt experienced a uniform top-to-NW orogen-paraUel extension in the ductile lithosphere before the widespread magmatism in the Cretaceous.展开更多
The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beisha...The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. （1） The regional distribution of gold deposits （and gold spots） is controlled by the ductile shear zone. （2） The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and control the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. （3） Compresso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. （4） Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R＇-type and T-type ones. （5） Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming materials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. （6） There is a negative correlation between the gold abundance and susceptibility anlsotropy （P） of the altered mylonlte samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.展开更多
The REE transportation in two sorts of mylonites of ductile shear zone, in Hetai gold deposit, Guangdong province was studied. The results show that there is REE compositional variation regularly in the ductile shear ...The REE transportation in two sorts of mylonites of ductile shear zone, in Hetai gold deposit, Guangdong province was studied. The results show that there is REE compositional variation regularly in the ductile shear zone. When mica-quartz schist and migmatite are changing into mylonites or ultramylonites, i.e., along with intensifying deformation, the contents of each rare earth element and the total contents of the LREE, HREE and REE increase or decrease regularly, but the REE patterns of the rock are accordant. The isocon diagram of the tectonic rocks before and after deformation shows that the REE compositional variation of the mylonites or ultramylonites are very small, but there is a few REE moving in or out in the rock deformation. The reason of the REE compositional variation is that there are volume change and fluid flow in the rock deformation, and it leads to the LREE relative enrichment and HREE relative loss.展开更多
The Suichang mine is the largest silicified vein-type silver-gold mineralization system in Southeast China, whose ore bodies are controlled by shear zones developing in Lower Proterozoic gneiss terrene with initial mi...The Suichang mine is the largest silicified vein-type silver-gold mineralization system in Southeast China, whose ore bodies are controlled by shear zones developing in Lower Proterozoic gneiss terrene with initial migmatization, which is covered by Upper Jurassic and Lower Cretaceous volcanic rock system and cut by acidic igneous veins of Jurassic and Cretaceous. The conclusions are as follows: (1) The ore-forming fluid is defined as superhigh tectonic-metamorphic fluid on the base of : 1 (D)-(18O) values 2 fluid inclusions;3 trace elements of pyrite from ores. (2) The shear zone silicified orebod-ies occurred in proterozoic, Jurassic and Cretaceous, which have been transforms in part by ore-bearing comb quartz vein of volcanism.展开更多
Nanoparticles are widely observed in the natural shear zone and experimental slip faults, which can lubricate the fault and significantly reduce the friction coefficient during seismic slip. But it is still not clear ...Nanoparticles are widely observed in the natural shear zone and experimental slip faults, which can lubricate the fault and significantly reduce the friction coefficient during seismic slip. But it is still not clear how the nanoparticles develop during the process of sliding. Clarifying the development stage of nanoparticles in a fault zone is critical to understanding the formation mechanisms of nanoparticles and the mechanism of fault weakening from a nanoperspective. In this study, four types of nanoparticles were found in the Indosinian Xiaomei shear zone, including spherical nanoparticles, rod-like nanograins and their aggregations. Ultramicroscopic analyses indicate that polished patches are highly smooth and composed of tightly packed spherical nanoparticles and well orientated rod-like nanograins during slip at high velocities. Meanwhile, the dome nanoparticles were formed by the calcite thermal decomposition due to frictional heat during highspeed sliding. The polygonal grooves are possibly related to high temperature(>900℃) grain boundary sliding deformation mechanisms. However, the porous and rough surfaces are accompanied by a series of holes and parallel "scratches" during a subsequent low-velocity stage. To ascertain the chemical composition of these nanoparticles, the energy dispersive spectrometer(EDS) test were conducted. The results suggest that materials rich in Fe, MgO and wollastonite are likely to form the rod-like nanograins, while materials rich in SiO2 are likely to form the spherical nanoparticles.展开更多
The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliatio...The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliations,subhorizontal lineations,and dextral kinematics.The microstructures and CPO patterns of calcite and quartz in the tectonites suggest shearing at temperatures of 200℃ to 500℃ or above.The amount of dextral displacement along the zones is less than 100 km.LA-ICP-MS U-Pb dating of zircons from some pre-kinematic granites gave ages of 364-325 Ma and 316 Ma,and zircons from a syn-kinematic leucogranite gave an age of 291 Ma.We propose that dextral shearing along the MTSZ started in the earliest Permian.Our data indicate that collision between the Yili and Junggar plates might have finished before 325 Ma or 316 Ma,with a tectonic transformation from 325 Ma to 300 Ma,resulting in intracontinental transpression from 300 Ma or 291 Ma.We suggest that the formation of the Kazakhstan orocline(KO)took place in two stages,with the early stage of bending driven by convergence related to oblique subduction,and the late stage possibly associated with lateral disarticulation as a result of the dextral strike-slip shear zones.展开更多
In order to study the distribution of equivalent and shear strain of aluminum alloy plate during snake hot rolling, several coupled thermo-mechanical finite element models(FEM) are established. Effects of speed ratio ...In order to study the distribution of equivalent and shear strain of aluminum alloy plate during snake hot rolling, several coupled thermo-mechanical finite element models(FEM) are established. Effects of speed ratio and offset distance on strain distribution of the plate are analyzed. The length of cross shear zone is defined to have a better understanding of the deformation characteristic in cross shear zone, which is the essential difference from symmetrical rolling in deformation zone. The results show that the equivalent strain and shear strain of lower part both increase with the increase of speed ratio, while the upper part decreases; the equivalent strain through the whole thickness decreases with ascending offset distance, while the shear strain of lower part increases. The length of cross shear zone quickly increases with ascending speed ratio and slightly decreases with ascending offset distance. The "positive" and "negative" cross shear zones are formed with the increase of speed ratio and offset distance, respectively. The value of the sensitivity coefficient of speed ratio is an order of magnitude bigger than the offset distance. However, the shear strain at center point increases with the ascending speed ratio and offset distance for different mechanism. As speed ratio increases, the asymmetry of the distribution of equivalent is becoming larger and the shear strain is generated in the same direction in cross shear zone. The FEM results agree well with experimental results.展开更多
On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collec...On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.展开更多
The Xiaotian–Mozitan Shear Zone(XMSZ)is the boundary of the Dabie High-grade Metamorphic Complex(DHMC)and the North Huaiyang Tectonic Belt.It was deformed in ductile conditions with a top-to-NW/WNW movement.Geothermo...The Xiaotian–Mozitan Shear Zone(XMSZ)is the boundary of the Dabie High-grade Metamorphic Complex(DHMC)and the North Huaiyang Tectonic Belt.It was deformed in ductile conditions with a top-to-NW/WNW movement.Geothermometers applied to mineral parageneses in mylonites of the shear zone give a temperature range of 623–691°C for the predeformation and 515–568°C for the syndeformation,respectively,which indicates a retrograde process of evolution.A few groups of zircon U-Pb ages were obtained from undeformed granitic veins and different types of deformed rocks in the zone.Zircons from the felsic ultramylonites are all magmatic,producing a weighted mean 206Pb/238U age of 754±8.1 Ma,which indicates the time of magmatic activities caused by rifting in the Neoproterozoic.Zircons from the granitic veins,cutting into the mylonites,are also of magmatic origin,producing a weighted mean 206 Pb/238 U age of 130±2.5 Ma,which represents the time of regional magmatic activity in the Cretaceous.Zircons from the mylonitic gneisses are of anatectic-metamorphic origins and are characterized by a core-mantle interior texture,which yielded several populations of ages including the Neoproterozoic ages with a weighted mean 206 Pb/238 U age of 762±18 Ma,similar to that of the felsic ultramylonites and the Early Cretaceous ages with a weighted mean 206Pb/238U age of 143±1.8 Ma,indicating the anatectic metamorphism in the Dabie Orogenic Belt(DOB).Based on integrated analysis of the structure,thermal conditions of ductile deformation and the contact relations of the dated rocks,the activation time of the Xiaotian–Mozitan Shear Zone is constrained between~143 Ma and 130 Ma,during which the DOB was undergoing a transition in tectonic regime from compression to extension.Therefore,the deformation and evolution of this shear zone plays an instrumental role in fully understanding this process.This research also inclines us to the interpretation of it as an extensional detachment,with regard to the tectonic properties of the shear zone.It may also be part of a continental scale extension in the background of the North China Block’s cratonic destruction,dominated by the subduction and roll-back of the Paleo-Pacific plate,but more detailed work is needed in order to unravel its complicated development.展开更多
The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jita...The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jitang metamorphic complex was determined.The macro-and microstructural analyses of the ductile detachment shear zone(Guoxuepu ductile shear zone,2–4 km wide)between the metamorphic complex and the overlying sedimentary cap show that the shear sense of the ductile shear zones is top-to-the-southeast.The presence of various deformation features and quartz C-axis electron backscatter diffraction(EBSD)fabric analysis suggests multiple deformation events occurring at different temperatures.The average stress is 25.68 MPa,with the strain rates(έ)ranging from 9.77×10^(−14)s^(−1)to 6.52×10^(−16)s^(−1).The finite strain of the Guoxuepu ductile shear zone indicates an elongated strain pattern.The average kinematic vorticity of the Guoxuepu ductile shear zone is 0.88,implying that the shear zone is dominated by simple shear.The muscovite selected from the protomylonite samples in the Guoxuepu ductile shear zone yields a 40Ar-39Ar age of 60.09±0.38 Ma.It is suggested that,coeval with the initial Indo–Eurasian collision,the development of strike-slip faults led to a weak and unstable crust,upwelling of lower crust magma,then induced the detachment of the Jitang metamorphic complex in the Eocene.展开更多
基金Program of China Three Gorges Corporation,Grant/Award Number:BHT 0679-1。
文摘The big underground powerhouse cavern of the China Baihetan hydropower plant is 438m long,34m wide,and 88.7m high.It is cut by a weak interlayer shear zone and its high sidewall poses a huge stability problem.This paper reports our successful solution of this problem through numerical simulations and a replacement-tunnel scheme in the detailed design stage and close site monitoring in the excavation stage.Particularly,in the detail design stage,mechanical parameters of the shear zone were carefully determined through laboratory experiments and site tests.Then,deformation of the surrounding rocks and the shear zone under high in situ stress conditions was predicted using 3 Dimensional Distinct Element Code(3DEC).Subsequently,a replacement-tunnel scheme was proposed for the treatment on the shear zone to prevent severe unloading relaxation of surrounding rocks.In the construction period,excavation responses were closely monitored on deformations of surrounding rocks and the shear zone.The effect of local cracking in the replacement tunnels on sidewall stability was evaluated using the strength reduction method.These monitoring results were compared with the predicted numerical simulation in the detailed design stage.It is found that the shear zone greatly modified the deformation mode of the cavern surrounding rocks.Without any treatment,rock mass deformation on the downstream sidewall was larger than 125mm and the shearing deformation of the shear zone was 60–70 mm.These preset replacement tunnels can reduce not only the unloading and relaxation of rock masses but also the maximum shearing deformation of the shear zone by 10–20 mm.The predictions by numerical simulation were in good agreement with the monitoring results.The proposed tunnel-replacement scheme can not only restrain the shear zone deformation but also enhance the safety of surrounding rocks and concrete tunnels.This design procedure offers a good reference for interaction between a big underground cavern and a weak layer zone in the future.
文摘The Nyakong-Manyi Shear Zone(NMSZ) is a NE-SW elongated corridor found to the northwest of the Foumban-Bankim Shear Zone(FBSZ) along the Central Cameroon Shear Zone. Controversial chronology models has been proposed for the kinematic evolution of the sinistral and dextral shear phases in the Tikar Plain, thus in the FBSZ;early dextral and late sinistral shear phases for some authors and early sinistral and late dextral shear for others. Moreover, the NMSZ kinematic evolution implication on the mylonitization P-T-t path in the area seem to be problematic and the present paper aim is to clear enough those problems;since this shear zone is the main mylonitic corridor that registered the left and right lateral movement in this area. The NMSZ comprises amphibolites, protomylonites, strict sensus mylonites(garnet-kyanite-sillimanite mylonite and garnet-pyroxene mylonite), ultramylonites kyanite-sillimanite and garnet-kyanite-sillimanite gneiss. Field structures testify that the investigated area recorded three deformation phases:(i) the D1deformation phase which is marked by NW-SE to N-S trending S1metamorphic foliation with low to moderate dips(15°–45°) that was transposed during the D2phase, is responsible for a regional metamorphism whose mineral paragenesis is garnet-kyanite-sillimanite;(ii) the early sinistral NNE-SSW to NE-SW shear phase D2marked by S2metamorphic and mylonitic foliations;responsible for, L2stretching mineral lineation, F2fold axes and B2boudins structures;(iii) the late dextral NE-SW shear phase D3, characterized by F3folds, B3boudins and ductile dextral C3shear planes. Mineral paragenesis garnet + kyanite + sillimanite and microstructures within gneiss testify that this rock underwent high grade regional metamorphism whose peak conditions are estimated at 11.5–13.5 kbar/850–900 ℃. After the peak of metamorphism gneiss was overprinted by high grade pressure mylonitization during the early sinistral and late dextral shear deformations. Microstructural data here indicate a high-grade mylonitization whose P-T conditions are estimated at least at around 10 kbar/750 ℃ attained during the D2. Shear markers, indicates that the studied area underwent an intense mylonitization at deep crustal deformation level, probably at the ductile-brittle boundary structural level during a major dextral shear deformation.
基金This work was supported by the National Natural Science Foundation of China （grants Nos. 49802020, 49732100 and 40172074)the Specific Project for Authors of the Best Dissertations of Chinese Universities and Colleges （200022)
文摘Structural analyses show that the Ailaoshan-Red River shear zone （ASRRSZ） in Ailao Mountain is composed of three different deformational domains. These domains may represent three episodes of left-lateral slip experienced by the ASRRSZ. The first episode of such deformation occurred throughout the eastern high-grade belt of the ASRRSZ under a transtensional regime and produced L- type tectonites of amphibolite grade. The second episode of left-lateral slip formed high strain zones overprinting the high-grade belt. Its deformational mechanism is similar to simple shear and the deformed rocks are L-S mylonites of greenschist grade. The third episode of left-lateral slip took place chiefly in a western low-grade belt of the ASRRSZ. This deformation occurred in a transpressional regime, formed an overall structure pattern of a sinistral thrust system and produced phyllonites of low-greenschist grade. Geochronological data indicated that the three episodes of left-lateral slip happened before ～58-56 Ma, at least from ～27 Ma to 22 Ma and at ～13-12 Ma respectively. The first episode of slip in the ASRRSZ appeared to correspond to the initial collision of India and Asia at ～60 Ma. The second episode took place almost at the same time as the most intensive compression and uplift in Tibet. The latest event might represent a further eastward material flow in Tibet after ～16-13 Ma. Thus, the ASRRSZ of southeastern Asia probably experienced three main episodes of Tertiary left- lateral slip in the course of intracontinental convergence since the India-Asia collision.
基金supported by the National Key Basic Research and Development(973) Project (2009CB421001)National Natural Science Foundation of China(40872139)+2 种基金China Geological Survey (1212010661311)Ministry of Land and Resources (200811008)the Ministry of Education,Proiect 111 (B07011)
文摘The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.
基金support from the State Key Research"973"Plan of China(No. 2009CB421001)National Natural Science Foundation of China(40872139)+1 种基金the 111 Project(B07011) of the Ministry of Education,State Key Laboratory of Geological Processes and Mineral Resources (GPMR200837)the Fundamental Research Funds for the Central Universities(GPMR2009PY01)
文摘The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan（DCS） high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River（ASRR） shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.
基金This work was financially supported by the key project for international collaboration, the National Natural Science Foundation of China (Project No. 40420120135).
文摘The Longquanguan shear zone is an important structural belt in the North China Craton, separating the underlying Fuping complex from the overlying Wutai complex. This shear zone has experienced three episodes of deformation: the first and main episode is a ductile top-to-ESE shear along the gently northwest-west dipping foliations, while the other two episodes are later collapse sliding. Prolonged granites parallel to the shear foliations make one of the main compositions of the Longquanguan shear zone. These granites experienced deformation to form mylonitic rocks when they emplaced during the first episode of deformation. Structural characters of the granites and their contacts to the country rocks indicate that these granites possibly resulted from in-situ partial remelting by shearing, i.e., they are syn-deformational granites. Monazites in these mylonitic granites are magmatic minerals and their crystallization ages may represent ages of the magmatic events, and also the ages for the main deformation of the Longquanguan shear zone. Monazite electronic microprobe dating were carried on two samples of granite, which gives multiple peak ages, among which 1,846 Ma and 1,877 Ma are the main peak ages for the two samples. These ages represent the main deformation of the Longquanguan shear zone, which is consistent with the main regional geological event at about 1,850 Ma caused by the collision between the Eastern and Western Blocks in North China. The good match between the monazite ages and the corresponding regional tectono-thermal events shows the feasibility and reliability of monazite electronic microprobe dating.
基金supported by the National Natural Science Foundation of China (Nos. 41402174, 41472166)the Fundamental Research Funds for the Central Universities, China University of Geosciences (Wuhan)+1 种基金China Scholarship Council (No. 201406415007)the Natural Sciences and Engineering Research Council of Canada
文摘The Jingdezhen ductile shear zone is evolved from the Neoproterozoic Zhangyuan ophiolite melange belt in the eastern Jiangnan Orogen, South China. Comprehensive study of geometry, kinematics, quartz c-axis fabric, temperature-pressure conditions and geochronology were conducted in this study. The Jingdezhen shear zone extends -180 km along the NE orientation with two groups of subvertical fo- liation and subhorizontal lineation. One group of foliation strikes NEN orientation whereas another one NEE orientation. Field investigation, microscopic observation and quartz c-axis fabric show that sinistral shearing along NEN-striking foliation occurred earlier than dextral shearing along NEE-striking foliation. Syn-tectonic staurolite porphyroblasts and deformation manner of feldspar imply that sinistral shearing occurred at 530-420 ℃ and 6-2 kbar. Deformation manner and c-axis fabric of quartz and pre-tectonic staurolite porphyroblasts indicate that dextral shearing took place at 420-300 ℃. LA-ICP-MS zircon U-Pb and mica ^40Ar/^39Ar dating indicate that the sinistral shearing occurred during Neoproterozoic oro- geny （830-800 Ma） whereas the dextral shearing at 447＋12 Ma. The sinistral shearing resulted from the Neoproterozoic final assembly between the Yangtze and Cathaysia blocks. The dextral shearing was caused by Early Paleozoic orogen parallel extension and clockwise rotation.
基金the keyproject of the National Natural Science Foundation of China,“Composition and Orogenic Process of Qilian Mountain”(Project No.4973020)the key project of theformer Ministry of Geology and Mineral Resources+1 种基金The Basic Framework and Lithosphere Shearing of Qilian-Altun Mountains”(1996-2000) the projectof the Key Fundamental Research,Development and Planning(No.G 1998040800).
文摘There is a large ductile shear zone, 2 km wide and more than 350 km long, inthe South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareousmylonites. The microstructures of the ductile shear zone show nearly E-W extending subverticalfoliation, horizontal and oblique stretching lineations, shearing sense from sinistral to obliquesinistral strike-slip from east to west, 'A' type folds and abundant granitic veins. Measuredlattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the graniticmylonite in the west segment suggest a strong LPO characterized by the dominant slip systems (1010) formed at high temperature (>650 deg C). K-feldspar of the mylonite shows an ^(39)Ar/^(40)Arhigh-temperature plateau age of 243.3 +- 1.3 Ma, and biotite, 250.5 +- 0.5 Ma, which represent theformation age of the ductile shear zone. The ^(39)Ar/^(40)Ar plateau ages of 169.7 +- 0.3 Ma and160.6 +- 0.1 Ma and the ^(39)Ar/^(40)Ar isochron ages of 166.99 +- 2.37 Ma and 160.6 +- 0.1 Ma ofbiotites in the mylonite represent the subsequent deformation age. These ages indicate that thisductile shear zone is similar to the Altun and South Kunlun sinistral ductile shear zones in itsages of movement, formation, reactivation and duration.
基金The study is sponsored by the National Natural Science Foundation of China (No.49172090 ) and supported by the Open Laboratory of Crust- Mantle Constitution, Recycling and Dynamics of Ministry of Geology and Mineral Resources
文摘There is a coupling of thermal, mechanical, chemical and fluidal processes in a continental shear zone. Both Xincheng - Xishui and Hetai shear zones are typical continental crust shear zones of greenschist facies environment. The representative mylonite zones of the shear zones are studied with whole rock major and trace element analyses. The chemical compositional variation tendencies in both shear zones are very similar and the gain - loss ratios of various components in the mylonitic rocks are reflected in the mass balance equations. The enrichment of those immobile high - field- strengh elements is considered to be related to the volume loss of the mylonitic rocks in a shear zone. Based on the volume loss expression Cs /Co = 1/(1- V), the fractional volume losses (V) are 37.5% and 36.5%-42.3% respectively for mylonites and ultramylonites in the Xincheng-Xishui shear zone and 11 % and 28% respectively for mylonites and phyllonites in the Hetai shear zone. The high volume loss and large removal of SiO2 from the system imply that there is a large amount of percolating fluids in the shear zones. From the SiO2 loss, the fluid/rock ratios (N) are calculated as Nmyl = 113 - 563, Nultramyl= 133-664 for the Xincheng-Xishui shear zone and Nmyl=42-208, Nphyl=110-550 for the Hetai shear zone. Such a large amount of percolating fluid must have profoundly affected the rheological behavior, chemical behavior and metallogenesis of the shear zones.
基金funded by the National Natural Science Foundation of China(grants No.41572191 and 41702211)the Natural Science Foundation of Guangxi(grant No.2017GXNSFBA198166)
文摘Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi （Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015）.
基金funded by the National Natural Science Foundation of China(Grants.41272222 to C.Z.Song and 41472166 to S.Lin)China Geological Survey(Grants.1212011121116 to S.Lin)a China Scholarship Council scholarship to H.Liu
文摘Large-scale magmatism affected the Tongbai-Dabie orogenic belt during post-collisional lateral tectonic extension in the Cretaceous, which was suggested to account for the widespread deformation and migmatization in the Tongbai-Dabie complexes. However, it cannot explain the most deformations in the shear zones. The northwest-southeast shear zones are developed around or wrapped the Tongbai-Dabie complexes. They play an important role for the interpretation of the tectonic evolution of the Tongbai-Dabie orogenic belt. By a systematically observation and description of the geometry and kinematics of these shear zones, we found that the shear zones to the north dip NE and have a uniform sinistral shear sense, the shear zone to the south dips SW and has a uniform dextral shear sense, and the shear zones at the core are sub-horizontal and have a uniform top-to-NW sense of shear. Combining with the comparison of previous and our geochronological studies, we interpret these associations as indicating that these shear zones were originally a single, more flat-lying and sub- horizontal shear zone with a uniform top-to-NW shear sense before the folding-doming of the Tongbai- Dabie complexes and suggest that the Tongbai-Dabie orogenic belt experienced a uniform top-to-NW orogen-paraUel extension in the ductile lithosphere before the widespread magmatism in the Cretaceous.
基金This paper is supported by the National 305 Program (Nos. 2001BA609A-07-02, 2006BAB07B02-04)Research Foundation of former Ministry of Geology and Mineral Re-sources of China (No.96-21)
文摘The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. （1） The regional distribution of gold deposits （and gold spots） is controlled by the ductile shear zone. （2） The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and control the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. （3） Compresso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. （4） Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R＇-type and T-type ones. （5） Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming materials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. （6） There is a negative correlation between the gold abundance and susceptibility anlsotropy （P） of the altered mylonlte samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.
文摘The REE transportation in two sorts of mylonites of ductile shear zone, in Hetai gold deposit, Guangdong province was studied. The results show that there is REE compositional variation regularly in the ductile shear zone. When mica-quartz schist and migmatite are changing into mylonites or ultramylonites, i.e., along with intensifying deformation, the contents of each rare earth element and the total contents of the LREE, HREE and REE increase or decrease regularly, but the REE patterns of the rock are accordant. The isocon diagram of the tectonic rocks before and after deformation shows that the REE compositional variation of the mylonites or ultramylonites are very small, but there is a few REE moving in or out in the rock deformation. The reason of the REE compositional variation is that there are volume change and fluid flow in the rock deformation, and it leads to the LREE relative enrichment and HREE relative loss.
基金Chinese Gold Management. Office (No.93-45-33) and Zhejiag Metallurgical (No. 98-27).
文摘The Suichang mine is the largest silicified vein-type silver-gold mineralization system in Southeast China, whose ore bodies are controlled by shear zones developing in Lower Proterozoic gneiss terrene with initial migmatization, which is covered by Upper Jurassic and Lower Cretaceous volcanic rock system and cut by acidic igneous veins of Jurassic and Cretaceous. The conclusions are as follows: (1) The ore-forming fluid is defined as superhigh tectonic-metamorphic fluid on the base of : 1 (D)-(18O) values 2 fluid inclusions;3 trace elements of pyrite from ores. (2) The shear zone silicified orebod-ies occurred in proterozoic, Jurassic and Cretaceous, which have been transforms in part by ore-bearing comb quartz vein of volcanism.
基金the National Natural Science Foundation of China(Nos.41776072,41676048,U1701641,91328205)。
文摘Nanoparticles are widely observed in the natural shear zone and experimental slip faults, which can lubricate the fault and significantly reduce the friction coefficient during seismic slip. But it is still not clear how the nanoparticles develop during the process of sliding. Clarifying the development stage of nanoparticles in a fault zone is critical to understanding the formation mechanisms of nanoparticles and the mechanism of fault weakening from a nanoperspective. In this study, four types of nanoparticles were found in the Indosinian Xiaomei shear zone, including spherical nanoparticles, rod-like nanograins and their aggregations. Ultramicroscopic analyses indicate that polished patches are highly smooth and composed of tightly packed spherical nanoparticles and well orientated rod-like nanograins during slip at high velocities. Meanwhile, the dome nanoparticles were formed by the calcite thermal decomposition due to frictional heat during highspeed sliding. The polygonal grooves are possibly related to high temperature(>900℃) grain boundary sliding deformation mechanisms. However, the porous and rough surfaces are accompanied by a series of holes and parallel "scratches" during a subsequent low-velocity stage. To ascertain the chemical composition of these nanoparticles, the energy dispersive spectrometer(EDS) test were conducted. The results suggest that materials rich in Fe, MgO and wollastonite are likely to form the rod-like nanograins, while materials rich in SiO2 are likely to form the spherical nanoparticles.
基金financially supported by the Major Basic Research Project of the Ministry of Science and Technology of China(Grant No.2014CB448000)the National Natural Science Foundation of China(Grant Nos.41772207,41422206)。
文摘The western segment of the Main Tianshan shear zone(MTSZ)branches into three major dextral strike-slip shear zones in the Borohoro Ranges,northwestern China.Mylonitic rocks within these zones exhibit vertical foliations,subhorizontal lineations,and dextral kinematics.The microstructures and CPO patterns of calcite and quartz in the tectonites suggest shearing at temperatures of 200℃ to 500℃ or above.The amount of dextral displacement along the zones is less than 100 km.LA-ICP-MS U-Pb dating of zircons from some pre-kinematic granites gave ages of 364-325 Ma and 316 Ma,and zircons from a syn-kinematic leucogranite gave an age of 291 Ma.We propose that dextral shearing along the MTSZ started in the earliest Permian.Our data indicate that collision between the Yili and Junggar plates might have finished before 325 Ma or 316 Ma,with a tectonic transformation from 325 Ma to 300 Ma,resulting in intracontinental transpression from 300 Ma or 291 Ma.We suggest that the formation of the Kazakhstan orocline(KO)took place in two stages,with the early stage of bending driven by convergence related to oblique subduction,and the late stage possibly associated with lateral disarticulation as a result of the dextral strike-slip shear zones.
基金Project(51405520)supported by the National Natural Science Foundation of ChinaProject(2012CB619505)supported by National Basic Research Program of China
文摘In order to study the distribution of equivalent and shear strain of aluminum alloy plate during snake hot rolling, several coupled thermo-mechanical finite element models(FEM) are established. Effects of speed ratio and offset distance on strain distribution of the plate are analyzed. The length of cross shear zone is defined to have a better understanding of the deformation characteristic in cross shear zone, which is the essential difference from symmetrical rolling in deformation zone. The results show that the equivalent strain and shear strain of lower part both increase with the increase of speed ratio, while the upper part decreases; the equivalent strain through the whole thickness decreases with ascending offset distance, while the shear strain of lower part increases. The length of cross shear zone quickly increases with ascending speed ratio and slightly decreases with ascending offset distance. The "positive" and "negative" cross shear zones are formed with the increase of speed ratio and offset distance, respectively. The value of the sensitivity coefficient of speed ratio is an order of magnitude bigger than the offset distance. However, the shear strain at center point increases with the ascending speed ratio and offset distance for different mechanism. As speed ratio increases, the asymmetry of the distribution of equivalent is becoming larger and the shear strain is generated in the same direction in cross shear zone. The FEM results agree well with experimental results.
基金This study was supported by the National Key Project "Study of the Natural Gas Fault System in the Tancheng-Lujiang Fault Belt (No. 95-101-01)" of the Ninth Five-Year Plan Period and the National Natural Science Foundation of China Grant 48970172.
文摘On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.
基金financially supported by the High Level Talent Introduction Program of Xinjiang Uyghur Autonomous Region 2018the National Postdoctoral Program(2018M643776)the Key R&D Program of China(2017YFC0601206)。
文摘The Xiaotian–Mozitan Shear Zone(XMSZ)is the boundary of the Dabie High-grade Metamorphic Complex(DHMC)and the North Huaiyang Tectonic Belt.It was deformed in ductile conditions with a top-to-NW/WNW movement.Geothermometers applied to mineral parageneses in mylonites of the shear zone give a temperature range of 623–691°C for the predeformation and 515–568°C for the syndeformation,respectively,which indicates a retrograde process of evolution.A few groups of zircon U-Pb ages were obtained from undeformed granitic veins and different types of deformed rocks in the zone.Zircons from the felsic ultramylonites are all magmatic,producing a weighted mean 206Pb/238U age of 754±8.1 Ma,which indicates the time of magmatic activities caused by rifting in the Neoproterozoic.Zircons from the granitic veins,cutting into the mylonites,are also of magmatic origin,producing a weighted mean 206 Pb/238 U age of 130±2.5 Ma,which represents the time of regional magmatic activity in the Cretaceous.Zircons from the mylonitic gneisses are of anatectic-metamorphic origins and are characterized by a core-mantle interior texture,which yielded several populations of ages including the Neoproterozoic ages with a weighted mean 206 Pb/238 U age of 762±18 Ma,similar to that of the felsic ultramylonites and the Early Cretaceous ages with a weighted mean 206Pb/238U age of 143±1.8 Ma,indicating the anatectic metamorphism in the Dabie Orogenic Belt(DOB).Based on integrated analysis of the structure,thermal conditions of ductile deformation and the contact relations of the dated rocks,the activation time of the Xiaotian–Mozitan Shear Zone is constrained between~143 Ma and 130 Ma,during which the DOB was undergoing a transition in tectonic regime from compression to extension.Therefore,the deformation and evolution of this shear zone plays an instrumental role in fully understanding this process.This research also inclines us to the interpretation of it as an extensional detachment,with regard to the tectonic properties of the shear zone.It may also be part of a continental scale extension in the background of the North China Block’s cratonic destruction,dominated by the subduction and roll-back of the Paleo-Pacific plate,but more detailed work is needed in order to unravel its complicated development.
基金financially supported by the China Geological Survey Scientific Research Project(Grant Nos.DD20190167 and DD20190053)the National Natural Science Foundation of China(Grant No.42172259).
文摘The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jitang metamorphic complex was determined.The macro-and microstructural analyses of the ductile detachment shear zone(Guoxuepu ductile shear zone,2–4 km wide)between the metamorphic complex and the overlying sedimentary cap show that the shear sense of the ductile shear zones is top-to-the-southeast.The presence of various deformation features and quartz C-axis electron backscatter diffraction(EBSD)fabric analysis suggests multiple deformation events occurring at different temperatures.The average stress is 25.68 MPa,with the strain rates(έ)ranging from 9.77×10^(−14)s^(−1)to 6.52×10^(−16)s^(−1).The finite strain of the Guoxuepu ductile shear zone indicates an elongated strain pattern.The average kinematic vorticity of the Guoxuepu ductile shear zone is 0.88,implying that the shear zone is dominated by simple shear.The muscovite selected from the protomylonite samples in the Guoxuepu ductile shear zone yields a 40Ar-39Ar age of 60.09±0.38 Ma.It is suggested that,coeval with the initial Indo–Eurasian collision,the development of strike-slip faults led to a weak and unstable crust,upwelling of lower crust magma,then induced the detachment of the Jitang metamorphic complex in the Eocene.
