Fractures play a crucial role in various fields such as hydrocarbon exploration,groundwater resources management,and earthquake research.The determination of fracture location and the estimation of parameters such as ...Fractures play a crucial role in various fields such as hydrocarbon exploration,groundwater resources management,and earthquake research.The determination of fracture location and the estimation of parameters such as fracture length and dip angle are the focus of geophysical work.In borehole observation system,the short distance between fractures and detectors leads to weak attenuation of elastic wave energy,and high-frequency source makes it easier to identify small-scale fractures.Compared to traditional monopole logging methods,dipole logging method has advantage of exciting pure shear waves sensitive to fractures,so its application is becoming increasingly widespread.However,since the reflected shear waves and scattered shear waves of fractures correspond to different fracture properties,how to distinguish and analyze these two kinds of waves is crucial for accurately characterizing the fracture parameters.To address this issue,numerical simulation of wave responses by a single fracture near a borehole in rock formation is performed,and the generation mechanism and characteristics of shear waves scattered by fractures are investigated.It is found that when the dip angle of the fracture surpasses a critical threshold,the S-wave will propagate to both endpoints of the fracture and generate scattered S-waves,resulting in two distinct scattered wave packets on the received waveform.When the polarization direction of the acoustic source is parallel to the strike of the fracture,the scattered SH-waves always have larger amplitude than the scattered SV-waves regardless of changing the fracture dip angle.Unlike SV-waves,the SH-waves scattered by the fracture do not have any mode conversion.Additionally,propagation of S-waves to a short length fracture can induce dipole mode vibration of the fracture within a wide frequency range.The phenomena of shear waves reflected and scattered by the fracture are further illustrated and verified by two field examples,thus showing the potential of scattered waves for fracture evaluation and characterization with borehole observation system.展开更多
How the state of living muscles modulates the features of nonlinear elastic waves generated by external dynamic loads remains unclear because of the challenge of directly observing and modeling nonlinear elastic waves...How the state of living muscles modulates the features of nonlinear elastic waves generated by external dynamic loads remains unclear because of the challenge of directly observing and modeling nonlinear elastic waves in skeletal muscles in vivo,considering their active deformation behavior.Here,this important issue is addressed by combining experiments performed with an ultrafast ultrasound imaging system to track nonlinear shear waves(shear shock waves)in muscles in vivo and finite element analysis relying on a physically motivated constitutive model to study the effect of muscle activation level.Skeletal muscle was loaded with a deep muscle stimulator to generate shear shock waves(SSWs).The particle velocities,second and third harmonics,and group velocities of the SSWs in living muscles under both passive and active states were measured in vivo.Our experimental results reveal,for the first time,that muscle states have a pronounced effect on wave features;a low level of activation may facilitate the occurrence of both the second and third harmonics,whereas a high level of activation may inhibit the third harmonic.Finite element analysis was further carried out to quantitatively explore the effect of active muscle deformation behavior on the generation and propagation of SSWs.The simulation results at different muscle activation levels confirmed the experimental findings.The ability to reveal the effects of muscle state on the features of SSWs may be helpful in elucidating the unique dynamic deformation mechanism of living skeletal muscles,quantitatively characterizing diverse shock wave-based therapy instruments,and guiding the design of muscle-mimicking soft materials.展开更多
Based on the continuously stratified quasi-geostrophic vorticity equation. the present paper analyses the instabilityof three-dimensional shear waves.The cause that most shear waves occur on the shelfside of strong cu...Based on the continuously stratified quasi-geostrophic vorticity equation. the present paper analyses the instabilityof three-dimensional shear waves.The cause that most shear waves occur on the shelfside of strong current near the west boundaries of the oceans is presented. The growth rate of small perturbations relies on the stratification charctters, and a maximum value of growth rate exists for certain stratification.展开更多
Starting from vorticity equation, the triggering mechanism and amplitude decay of shear waves in the ocean are discussed in this paper. The theoretical analysis indicates that by the action of stripped external force ...Starting from vorticity equation, the triggering mechanism and amplitude decay of shear waves in the ocean are discussed in this paper. The theoretical analysis indicates that by the action of stripped external force (for examples, the sudden setting of stripped wind, moving stripped wind, etc. ), shear waves can be triggered. This is qualitatively consistent with satellite observations. The amplitude decay process of shear waves by the action of side friction is also discussed in the paper. The theoretical model is quantitatively consistent with satellite observations.展开更多
- Starting from satellite remote sensing data, the dynamical processes of shear waves occurring at the boundary between the western boundary current and the shelf slope water are studied and dynamically analyzed in th...- Starting from satellite remote sensing data, the dynamical processes of shear waves occurring at the boundary between the western boundary current and the shelf slope water are studied and dynamically analyzed in this study. The average wavelength is 75 km, and the average amplitude (from crest to trough )17 km. the average phase speed 100 cms-1 for the shear waves along the north wall of the Gulf Stream to the east of Cape Hatteras measured from NOAA satellite IR (infrared ) images. The average wavelength of shear waves along the north wall of the Kuroshio Current is 57 km, and the average amplitude 17 km. For the shear waves occurring along the west wall of the Gulf Stream to the south of Cape Hatteras, the average wavelength is 131 km, and the average amplitude 33 km measured from Seasat SAR (synthetic aperture radar )images. The time for one cycle of shear wave event is about one week.In order to explore the dynamical mechanisms of shear waves, we solved the vorticity equation for a stratified fluid, and obtained an analytical expression of dispersion relation of shear waves. The results indicated that there was a parabolic relation between the phase speed and the wavelength of shear waves, and the mean flow field was an important factor in the dispersion relation. The latter point means that the horizontal tangent variation of velocity is a basic condition for shear wave occurrence. Theoretical analyses are confirmed by satellite remote sensing data.展开更多
In this paper, the scattering of harmonic antiplane shear waves bytwo finite cracks is studied using the non-local theory. The Fouriertransform is applied and a mixed boundary value prob- lem isformulated. Then a set ...In this paper, the scattering of harmonic antiplane shear waves bytwo finite cracks is studied using the non-local theory. The Fouriertransform is applied and a mixed boundary value prob- lem isformulated. Then a set of triple integral equations is solved using anew method, namely Schimidt's method. This method is more exact andmore reasonable than Erigen's for solving this Kind of problem. Theresult of the stress near the crack tip was obtained. Contrary to theclassical elas- Ticity solution, it is found that no stresssingularity is present at the crack tip, which can explain theProblem of macroscopic and microscopic mechanics.展开更多
This paper describes the three phenomena observed in full wave experiments： 1. the amplitudes （absolute value） of the first compressional and shear arrivals have the same variation rules; 2. the phases of the first...This paper describes the three phenomena observed in full wave experiments： 1. the amplitudes （absolute value） of the first compressional and shear arrivals have the same variation rules; 2. the phases of the first compressional and shear arrivals are always opposite to each other; and 3. the amplitude variation periods of the first compressional and shear arrivals are 2π. A full analysis and interpretation points out that these phenomena should appear under the full wave logging condition. Hence,the basis of using phase diffrences to extract useful information from the full wave is found.展开更多
This paper studies the propagation of horizontally polarized shear waves in an internal magnetoelastic monoclinic stratum with irregularity in lower interface. The stratum is sandwiched between two magnetoelastic mono...This paper studies the propagation of horizontally polarized shear waves in an internal magnetoelastic monoclinic stratum with irregularity in lower interface. The stratum is sandwiched between two magnetoelastic monoclinic semi-infinite media. Dispersion equation is obtained in a closed form. In the absence of magnetic field and irregularity of the medium, the dispersion equation agrees with the equation of classical case in three layered media. The effects of magnetic field and size of irregularity on the phase velocity are depicted by means of graphs.展开更多
Since most of the natural disasters in the Yellow River are caused by sediment,the study of sediment composition,erosion and transport law is a fundamental part of sediment management in the Yellow River.As a method o...Since most of the natural disasters in the Yellow River are caused by sediment,the study of sediment composition,erosion and transport law is a fundamental part of sediment management in the Yellow River.As a method of in-situ testing,shear wave detection can obtain physical parameters such as the shear modulus of sediment.This paper,based on the Biot–Stoll model,deduces the equations for calculating the reflection and transmission coefficients when a shear wave is incident at the interface between sediment layer,and analyzes the effects of frequency,incident angle and porosity on the reflection and transmission coeffi cients of shear waves,as well as the diff erences in the propagation characteristics of longitudinal and shear waves at the interface between sediment layer.The results indicate that the refl ection and transmission coeffi cients of shear waves are linearly related to the porosity of sediment,and the refl ection coeffi cient of shear waves increases with the increase of porosity.The incident angle has a great infl uence on the changes of the reflection and transmission coefficients of shear waves,especially near the critical angle,the coeffi cients change abruptly.The frequency has a great infl uence on the refl ection and transmission coeffi cients of shear waves only near the characteristic frequency of sediment,while deviation from the characteristic frequency,the infl uence is small.The research results have certain signifi cance for obtaining the physical parameters of sediment and analyzying the composition of the Yellow River sediment and its erosion law.展开更多
Based on the quasi-geostrophic vorticity equation, the present peper simulates the water mxing process in the formation Of ocean shear waves using large eddy simulation methods. From Lagrangian tracing, we study the o...Based on the quasi-geostrophic vorticity equation, the present peper simulates the water mxing process in the formation Of ocean shear waves using large eddy simulation methods. From Lagrangian tracing, we study the ocean shear wave's changing from wave character to vortex character. The distance between tracer groups increases near the ocean shear wave area, and decreases between ocean shear waves. The tracers that are uniformally distributed in space do not retain the uniform character in the mixing process. The frequency shift of the perturbation waves is caused by their nonlinear interaction. The wave number ratio and phase lag of the initial perturbation waves affect the mixing process, but the results show little difference. The increase of the viscosity coefficient will restrain the mixing process.展开更多
This study explores the significance of using two-dimensional shear wave elastography(2D-SWE)to assess liver stiffness(LS)and spleen area(SPA)for predicting post-hepatectomy liver failure(PHLF).By providing a non-inva...This study explores the significance of using two-dimensional shear wave elastography(2D-SWE)to assess liver stiffness(LS)and spleen area(SPA)for predicting post-hepatectomy liver failure(PHLF).By providing a non-invasive method to measure LS,which correlates with the degree of liver fibrosis,and SPA,an indicator of portal hypertension,2D-SWE offers a comprehensive evaluation of a patient’s hepatic status.These advancements are particularly crucial in hepatic surgery,where accurate preoperative assessments are essential for optimizing surgical outcomes and minimizing complications.This letter highlights the prac-tical implications of integrating 2D-SWE into clinical practice,emphasizing its potential to improve patient safety and surgical precision by enhancing the ability to predict PHLF and tailor surgical approaches accordingly.展开更多
BACKGROUND Thyroid dysfunction during pregnancy is an important disease affecting the health of mothers and children.Two-dimensional(2D)shear wave elastography(SWE)is the newest ultrasonic elastography technology and ...BACKGROUND Thyroid dysfunction during pregnancy is an important disease affecting the health of mothers and children.Two-dimensional(2D)shear wave elastography(SWE)is the newest ultrasonic elastography technology and its value in differentiating benign and malignant thyroid nodules has been widely recognized.However,the value of 2D SWE in evaluating and predicting thyroid function is unclear.AIM To explore prospectively the value of 2D SWE quantitative analysis for the evaluation of thyroid function in the first trimester.METHODS We included outpatients of reproductive age in the Department of Gynecology in Shanghai Changning Maternity and Infant Health Hospital between March 2023 and March 2024 who had conventional ultrasound examination and 2D SWE of the thyroid.They also underwent transvaginal ultrasound examination to confirm early intrauterine pregnancy and serum thyroid stimulating hormone(TSH)level was measured.The patients were divided into pregnant with normal TSH,pregnant with abnormal TSH,and nonpregnant with normal TSH.Conventional ultrasound and 2D SWE results were compared among the three groups.RESULTS A total of 108 patients were included in the study;57 in the pregnant with normal TSH group,18 in the pregnant with abnormal TSH group and 33 were in the nonpregnant with normal TSH group.Thyroid size,thyroid echotexture,2D SWE quantitative parameters including mean elasticity in the region of interest and maximal elasticity in the region of interest showed no significant differences among the three groups(P>0.05).CONCLUSION Conventional ultrasound and 2D SWE features could not reflect the level of serum TSH.展开更多
The ability to reliably detect coronary artery disease based on the acousticnoises produced by a stenosis can provide a simple, non-invasive technique for diagnosis.Current research exploits the shear wave fields in b...The ability to reliably detect coronary artery disease based on the acousticnoises produced by a stenosis can provide a simple, non-invasive technique for diagnosis.Current research exploits the shear wave fields in body tissue to detect andanalyze coronary stenoses. The methods and ideas outlined in earlier efforts [6] includinga mathematical model utilizing an internal strain variable approximation tothe quasi-linear viscoelastic constitutive equation proposed by Fung in [19] is extendedhere. As an initial investigation, a homogeneous two-dimensional viscoelastic geometryis considered. Being uniform in θ, this geometry behaves as a one dimensionalmodel, and the results generated from it are compared to the one dimensional resultsfrom [6]. To allow for different assumptions on the elastic response, several variationsof the model are considered. A statistical significance test is employed to determine ifthe more complex models are significant improvements. After calibrating the modelwith a comparison to previous findings, more complicated geometries are considered.Simulations involving a heterogeneous geometrywith a uniformring running throughthe original medium, a θ-dependent model which considers a rigid partial occlusionformed along the inner radius of the geometry, and a model which combines the ringand occlusion are presented.展开更多
Two-dimensional scalar equation for the displacement of steady cross-plane shear (SH) waves in homogeneous and transversely isotropic media like unidirectional fibrous com-posites is given. Then, thrbugh a simple coor...Two-dimensional scalar equation for the displacement of steady cross-plane shear (SH) waves in homogeneous and transversely isotropic media like unidirectional fibrous com-posites is given. Then, thrbugh a simple coordinate system transform, the scalar equation is standardized into a Helmholtz equation. Corresponding integral equations are derived for the scattering problems and boundary element method (BEM) is used to calculate the scattered fields of arbitrarily shaped obstacles with both soft and rigid boudary conditions numerically.A discussion is given on the numerical results which is mainly focused on the influence of the a-nisotropy of the media to the directivity of the scattered fields by circular cylindrical voids.展开更多
Cyclic freezing-thawing can lead to fracture development in coal,affecting its mechanical and consumer properties.To study crack formations in coal,an ultrasonic sounding method using shear polarized waves was propose...Cyclic freezing-thawing can lead to fracture development in coal,affecting its mechanical and consumer properties.To study crack formations in coal,an ultrasonic sounding method using shear polarized waves was proposed.Samples of three coal types(anthracite,lignite and hard coal)were tested.The research results show that,in contrast to the shear wave velocity,the shear wave amplitude is extremely sensitive to the formation of new cracks at the early stages of cyclic freezing-thawing.Tests also show an inverse correlation between coal compressive strength and its tendency to form cracks under temperature impacts;shear wave attenuation increases more sharply in high-rank coals after the first freezing cycle.Spectral analysis of the received signals also confirmed significant crack formation in anthracite after the first freeze-thaw cycle.The initial anisotropy was determined,and its decrease with an increase in the number of freeze-thaw cycles was shown.The data obtained forms an experimental basis for the development of new approaches to preserve coal consumer properties during storage and transportation under severe natural and climatic conditions.展开更多
BACKGROUND Integrating conventional ultrasound features with 2D shear wave elastography(2D-SWE)can potentially enhance preoperative hepatocellular carcinoma(HCC)predictions.AIM To develop a 2D-SWE-based predictive mod...BACKGROUND Integrating conventional ultrasound features with 2D shear wave elastography(2D-SWE)can potentially enhance preoperative hepatocellular carcinoma(HCC)predictions.AIM To develop a 2D-SWE-based predictive model for preoperative identification of HCC.METHODS A retrospective analysis of 884 patients who underwent liver resection and pathology evaluation from February 2021 to August 2023 was conducted at the Oriental Hepatobiliary Surgery Hospital.The patients were divided into the modeling group(n=720)and the control group(n=164).The study included conventional ultrasound,2D-SWE,and preoperative laboratory tests.Multiple logistic regression was used to identify independent predictive factors for RESULTS In the modeling group analysis,maximal elasticity(Emax)of tumors and their peripheries,platelet count,cirrhosis,and blood flow were independent risk indicators for malignancies.These factors yielded an area under the curve of 0.77(95%confidence interval:0.73-0.81)with 84%sensitivity and 61%specificity.The model demonstrated good calibration in both the construction and validation cohorts,as shown by the calibration graph and Hosmer-Lemeshow test(P=0.683 and P=0.658,respectively).Additionally,the mean elasticity(Emean)of the tumor periphery was identified as a risk factor for microvascular invasion(MVI)in malignant liver tumors(P=0.003).Patients receiving antiviral treatment differed significantly in platelet count(P=0.002),Emax of tumors(P=0.033),Emean of tumors(P=0.042),Emax at tumor periphery(P<0.001),and Emean at tumor periphery(P=0.003).CONCLUSION 2D-SWE’s hardness value serves as a valuable marker for enhancing the preoperative diagnosis of malignant liver lesions,correlating significantly with MVI and antiviral treatment efficacy.展开更多
The discrete element method(DEM)is a capable tool used to simulate shear wave propagation in granular assemblies for many years.Researchers have studied assembly shapes such as rectangles(in 2D simulations)or cylinder...The discrete element method(DEM)is a capable tool used to simulate shear wave propagation in granular assemblies for many years.Researchers have studied assembly shapes such as rectangles(in 2D simulations)or cylinders and cubes(in 3D simulations).This paper aimed to qualify the effect of assembly shape on the shear wave propagation and maximum amplification in the vertical plane(horizontal and vertical directions)caused by this propagation.To this end,shear wave propagations in different assembly shapes such as rectangle,trapezium,and triangle with rigid boundary conditions were simulated.A sine wave pulse was applied with a point source by moving a particle as the transmitter particle.To evaluate the shear wave velocity of the assemblies,the transmitter and receiver particles were simulated.All the simulations were performed with 2D DEM which is a useful tool to determine the amount and location of the maximum amplification factor of the assembly in both horizontal and vertical directions.An advantage of this study was assessing the effect of parameters such as input wave frequency,assembly height,shape,and aspect ratios on the amplification of the input waves.展开更多
BACKGROUND Real-time shear wave elastography(SWE)is a non-invasive imaging technique used to measure tissue stiffness by generating and tracking shear waves in real time.This advanced ultrasound-based method provides ...BACKGROUND Real-time shear wave elastography(SWE)is a non-invasive imaging technique used to measure tissue stiffness by generating and tracking shear waves in real time.This advanced ultrasound-based method provides quantitative information regarding tissue elasticity,offering valuable insights into the mechanical properties of biological tissues.However,the application of real-time SWE in the musculoskeletal system and sports medicine has not been extensively studied.AIM To explore the practical value of real-time SWE for assessing Achilles tendon hardness in older adults.METHODS A total of 60 participants were enrolled in the present study,and differences in the elastic moduli of the bilateral Achilles tendons were compared among the following categories:(1)Age:55-60,60-65,and 65-70-years-old;(2)Sex:Male and female;(3)Laterality:Left and right sides;(4)Tendon state:Relaxed and tense state;and(5)Tendon segment:Proximal,middle,and distal.RESULTS There were no significant differences in the elastic moduli of the bilateral Achilles tendons when comparing by age or sex(P>0.05).There were,however,significant differences when comparing by tendon side,state,or segment(P<0.05).CONCLUSION Real-time SWE plays a significant role compared to other examination methods in the evaluation of Achilles tendon hardness in older adults.展开更多
Characterizing the gap eigenmode of shear Alfv′en waves(SAWs) and its interaction with energetic ions is important to the success of magnetically confined fusion. Previous studies have reported an experimental observ...Characterizing the gap eigenmode of shear Alfv′en waves(SAWs) and its interaction with energetic ions is important to the success of magnetically confined fusion. Previous studies have reported an experimental observation of the spectral gap of SAW on the on Large Plasma Device(LAPD)(Zhang et al. 2008 Phys. Plasmas 15 012103), a linear large plasma device(Gekelman et al. 1991 Rev. Sci. Instrum. 62 2875) possessing easier diagnostic access and lower cost compared with traditional fusion devices, and analytical theory and numerical gap eigenmode using ideal conditions(Chang 2014 Ph.D Thesis at Australian National University). To guide experimental implementation, the present work models the gap eigenmode of SAWs using exact LAPD parameters. A full picture of the wave field for previous experiment reveals that the previously observed spectral gap is not global but an axially local result. To form a global spectral gap, the number of magnetic mirrors has to be increased and stronger static magnetic field makes it clearer. Such a spectral gap is obtained for the magnetic field of B0(z) = 1.2 + 0.6 cos[2π(z-33.68)/3.63] with 7.74-m magnetic beach. By introducing two types of local defects(corresponding to Eθ(z0) = 0 and E’θ(z0) = 0 respectively), odd-parity and even-parity discrete eigenmodes are formed clearly inside the gap. The strength of these gap eigenmodes decreases significantly with collision frequency, which is consistent with previous studies. Parameter scans show that these gap eigenmodes can be even formed successfully for the field strength of B0(z) = 0.2 + 0.1 cos[2π(z-33.68)/3.63] and with only four magnetic mirrors, which are achievable by the LAPD at its present status. This work can serve as a strong motivation and direct reference for the experimental implementation of the gap eigenmode of SAWs on the LAPD and other linear plasma devices.展开更多
Elastography can be used as a diagnostic method for quantitative characterization of tissue hardness information and thus,differential changes in pathophysiological states of tissues.In this study,we propose a new met...Elastography can be used as a diagnostic method for quantitative characterization of tissue hardness information and thus,differential changes in pathophysiological states of tissues.In this study,we propose a new method for shear wave elastography(SWE)based on laser-excited shear wave,called photoacoustic shear wave elastography(PASWE),which combines photoacoustic(PA)technology with ultrafast ultrasound imaging.By using a focused laser to excite shear waves and ultrafast ultrasonic imaging for detection,high-frequency excitation of shear waves and noncontact elastic imaging can be realized.The laser can stimulate the tissue with the light absorption characteristic to produce the thermal expansion,thus producing the shear wave.The frequency of shear wave induced by laser is higher and the frequency band is wider.By tracking the propagation of shear wave,Young’s modulus of tissue is reconstructed in the whole shear wave propagation region to further evaluate the elastic information of tissue.The feasibility of the method is verified by experiments.Compared with the experimental results of supersonic shear imaging(SSI),it is proved that the method can be used for quantitative elastic imaging of the phantoms.In addition,compared with the SSI method,this method can realize the noncontact excitation of the shear wave,and the frequency of the shear wave excited by the laser is higher than that of the acoustic radiation force(ARF),so the spatial resolution is higher.Compared to the traditional PA elastic imaging method,this method can obtain a larger imaging depth under the premise of ensuring the imaging resolution,and it has potential application value in the clinical diagnosis of diseases requiring noncontact quantitative elasticity.展开更多
基金supported by Scientific Research and Technology Development Project of CNPC(2024ZG38,2024ZG42)the CNPC Innovation Fund(2022DQ02-0307).
文摘Fractures play a crucial role in various fields such as hydrocarbon exploration,groundwater resources management,and earthquake research.The determination of fracture location and the estimation of parameters such as fracture length and dip angle are the focus of geophysical work.In borehole observation system,the short distance between fractures and detectors leads to weak attenuation of elastic wave energy,and high-frequency source makes it easier to identify small-scale fractures.Compared to traditional monopole logging methods,dipole logging method has advantage of exciting pure shear waves sensitive to fractures,so its application is becoming increasingly widespread.However,since the reflected shear waves and scattered shear waves of fractures correspond to different fracture properties,how to distinguish and analyze these two kinds of waves is crucial for accurately characterizing the fracture parameters.To address this issue,numerical simulation of wave responses by a single fracture near a borehole in rock formation is performed,and the generation mechanism and characteristics of shear waves scattered by fractures are investigated.It is found that when the dip angle of the fracture surpasses a critical threshold,the S-wave will propagate to both endpoints of the fracture and generate scattered S-waves,resulting in two distinct scattered wave packets on the received waveform.When the polarization direction of the acoustic source is parallel to the strike of the fracture,the scattered SH-waves always have larger amplitude than the scattered SV-waves regardless of changing the fracture dip angle.Unlike SV-waves,the SH-waves scattered by the fracture do not have any mode conversion.Additionally,propagation of S-waves to a short length fracture can induce dipole mode vibration of the fracture within a wide frequency range.The phenomena of shear waves reflected and scattered by the fracture are further illustrated and verified by two field examples,thus showing the potential of scattered waves for fracture evaluation and characterization with borehole observation system.
基金supported by the National Students Training Program for Innovation(Grant No.202210007029)。
文摘How the state of living muscles modulates the features of nonlinear elastic waves generated by external dynamic loads remains unclear because of the challenge of directly observing and modeling nonlinear elastic waves in skeletal muscles in vivo,considering their active deformation behavior.Here,this important issue is addressed by combining experiments performed with an ultrafast ultrasound imaging system to track nonlinear shear waves(shear shock waves)in muscles in vivo and finite element analysis relying on a physically motivated constitutive model to study the effect of muscle activation level.Skeletal muscle was loaded with a deep muscle stimulator to generate shear shock waves(SSWs).The particle velocities,second and third harmonics,and group velocities of the SSWs in living muscles under both passive and active states were measured in vivo.Our experimental results reveal,for the first time,that muscle states have a pronounced effect on wave features;a low level of activation may facilitate the occurrence of both the second and third harmonics,whereas a high level of activation may inhibit the third harmonic.Finite element analysis was further carried out to quantitatively explore the effect of active muscle deformation behavior on the generation and propagation of SSWs.The simulation results at different muscle activation levels confirmed the experimental findings.The ability to reveal the effects of muscle state on the features of SSWs may be helpful in elucidating the unique dynamic deformation mechanism of living skeletal muscles,quantitatively characterizing diverse shock wave-based therapy instruments,and guiding the design of muscle-mimicking soft materials.
文摘Based on the continuously stratified quasi-geostrophic vorticity equation. the present paper analyses the instabilityof three-dimensional shear waves.The cause that most shear waves occur on the shelfside of strong current near the west boundaries of the oceans is presented. The growth rate of small perturbations relies on the stratification charctters, and a maximum value of growth rate exists for certain stratification.
文摘Starting from vorticity equation, the triggering mechanism and amplitude decay of shear waves in the ocean are discussed in this paper. The theoretical analysis indicates that by the action of stripped external force (for examples, the sudden setting of stripped wind, moving stripped wind, etc. ), shear waves can be triggered. This is qualitatively consistent with satellite observations. The amplitude decay process of shear waves by the action of side friction is also discussed in the paper. The theoretical model is quantitatively consistent with satellite observations.
文摘- Starting from satellite remote sensing data, the dynamical processes of shear waves occurring at the boundary between the western boundary current and the shelf slope water are studied and dynamically analyzed in this study. The average wavelength is 75 km, and the average amplitude (from crest to trough )17 km. the average phase speed 100 cms-1 for the shear waves along the north wall of the Gulf Stream to the east of Cape Hatteras measured from NOAA satellite IR (infrared ) images. The average wavelength of shear waves along the north wall of the Kuroshio Current is 57 km, and the average amplitude 17 km. For the shear waves occurring along the west wall of the Gulf Stream to the south of Cape Hatteras, the average wavelength is 131 km, and the average amplitude 33 km measured from Seasat SAR (synthetic aperture radar )images. The time for one cycle of shear wave event is about one week.In order to explore the dynamical mechanisms of shear waves, we solved the vorticity equation for a stratified fluid, and obtained an analytical expression of dispersion relation of shear waves. The results indicated that there was a parabolic relation between the phase speed and the wavelength of shear waves, and the mean flow field was an important factor in the dispersion relation. The latter point means that the horizontal tangent variation of velocity is a basic condition for shear wave occurrence. Theoretical analyses are confirmed by satellite remote sensing data.
文摘In this paper, the scattering of harmonic antiplane shear waves bytwo finite cracks is studied using the non-local theory. The Fouriertransform is applied and a mixed boundary value prob- lem isformulated. Then a set of triple integral equations is solved using anew method, namely Schimidt's method. This method is more exact andmore reasonable than Erigen's for solving this Kind of problem. Theresult of the stress near the crack tip was obtained. Contrary to theclassical elas- Ticity solution, it is found that no stresssingularity is present at the crack tip, which can explain theProblem of macroscopic and microscopic mechanics.
文摘This paper describes the three phenomena observed in full wave experiments： 1. the amplitudes （absolute value） of the first compressional and shear arrivals have the same variation rules; 2. the phases of the first compressional and shear arrivals are always opposite to each other; and 3. the amplitude variation periods of the first compressional and shear arrivals are 2π. A full analysis and interpretation points out that these phenomena should appear under the full wave logging condition. Hence,the basis of using phase diffrences to extract useful information from the full wave is found.
基金supported by the Department of Science and Technology of New Delhi(No.SR/S4/MS:436/07)
文摘This paper studies the propagation of horizontally polarized shear waves in an internal magnetoelastic monoclinic stratum with irregularity in lower interface. The stratum is sandwiched between two magnetoelastic monoclinic semi-infinite media. Dispersion equation is obtained in a closed form. In the absence of magnetic field and irregularity of the medium, the dispersion equation agrees with the equation of classical case in three layered media. The effects of magnetic field and size of irregularity on the phase velocity are depicted by means of graphs.
基金supported by the Natural Science Foundation of Henan Province(Grant No.202300410547)National Natural Science Foundation of China(Grant No.41774066)Fundamental Research Funds for Yellow River Institute of Hydraulic Research(Grant No.HKY-JBYW-2021-10).
文摘Since most of the natural disasters in the Yellow River are caused by sediment,the study of sediment composition,erosion and transport law is a fundamental part of sediment management in the Yellow River.As a method of in-situ testing,shear wave detection can obtain physical parameters such as the shear modulus of sediment.This paper,based on the Biot–Stoll model,deduces the equations for calculating the reflection and transmission coefficients when a shear wave is incident at the interface between sediment layer,and analyzes the effects of frequency,incident angle and porosity on the reflection and transmission coeffi cients of shear waves,as well as the diff erences in the propagation characteristics of longitudinal and shear waves at the interface between sediment layer.The results indicate that the refl ection and transmission coeffi cients of shear waves are linearly related to the porosity of sediment,and the refl ection coeffi cient of shear waves increases with the increase of porosity.The incident angle has a great infl uence on the changes of the reflection and transmission coefficients of shear waves,especially near the critical angle,the coeffi cients change abruptly.The frequency has a great infl uence on the refl ection and transmission coeffi cients of shear waves only near the characteristic frequency of sediment,while deviation from the characteristic frequency,the infl uence is small.The research results have certain signifi cance for obtaining the physical parameters of sediment and analyzying the composition of the Yellow River sediment and its erosion law.
文摘Based on the quasi-geostrophic vorticity equation, the present peper simulates the water mxing process in the formation Of ocean shear waves using large eddy simulation methods. From Lagrangian tracing, we study the ocean shear wave's changing from wave character to vortex character. The distance between tracer groups increases near the ocean shear wave area, and decreases between ocean shear waves. The tracers that are uniformally distributed in space do not retain the uniform character in the mixing process. The frequency shift of the perturbation waves is caused by their nonlinear interaction. The wave number ratio and phase lag of the initial perturbation waves affect the mixing process, but the results show little difference. The increase of the viscosity coefficient will restrain the mixing process.
基金Supported by Guangdong Medical Science and Technology Research Fund Project,No.A2024475.
文摘This study explores the significance of using two-dimensional shear wave elastography(2D-SWE)to assess liver stiffness(LS)and spleen area(SPA)for predicting post-hepatectomy liver failure(PHLF).By providing a non-invasive method to measure LS,which correlates with the degree of liver fibrosis,and SPA,an indicator of portal hypertension,2D-SWE offers a comprehensive evaluation of a patient’s hepatic status.These advancements are particularly crucial in hepatic surgery,where accurate preoperative assessments are essential for optimizing surgical outcomes and minimizing complications.This letter highlights the prac-tical implications of integrating 2D-SWE into clinical practice,emphasizing its potential to improve patient safety and surgical precision by enhancing the ability to predict PHLF and tailor surgical approaches accordingly.
基金Supported by the Natural Science Foundation of Shanghai,No.22ZR1458200Medical Ph.D Innovative Talent Base Project of Changning District,No.RCJD2021B09+1 种基金Key Specialty of Changning District,No.20231004Shanghai Changning Maternity and Infant Health Hospital Start-Up Project,No.2020Y-14.
文摘BACKGROUND Thyroid dysfunction during pregnancy is an important disease affecting the health of mothers and children.Two-dimensional(2D)shear wave elastography(SWE)is the newest ultrasonic elastography technology and its value in differentiating benign and malignant thyroid nodules has been widely recognized.However,the value of 2D SWE in evaluating and predicting thyroid function is unclear.AIM To explore prospectively the value of 2D SWE quantitative analysis for the evaluation of thyroid function in the first trimester.METHODS We included outpatients of reproductive age in the Department of Gynecology in Shanghai Changning Maternity and Infant Health Hospital between March 2023 and March 2024 who had conventional ultrasound examination and 2D SWE of the thyroid.They also underwent transvaginal ultrasound examination to confirm early intrauterine pregnancy and serum thyroid stimulating hormone(TSH)level was measured.The patients were divided into pregnant with normal TSH,pregnant with abnormal TSH,and nonpregnant with normal TSH.Conventional ultrasound and 2D SWE results were compared among the three groups.RESULTS A total of 108 patients were included in the study;57 in the pregnant with normal TSH group,18 in the pregnant with abnormal TSH group and 33 were in the nonpregnant with normal TSH group.Thyroid size,thyroid echotexture,2D SWE quantitative parameters including mean elasticity in the region of interest and maximal elasticity in the region of interest showed no significant differences among the three groups(P>0.05).CONCLUSION Conventional ultrasound and 2D SWE features could not reflect the level of serum TSH.
基金the U.S.Air Force Office of Scientific Research under grant AFOSR-FA9550-04-1-0220 and in part by The David and Lucille Packard Foundation.
文摘The ability to reliably detect coronary artery disease based on the acousticnoises produced by a stenosis can provide a simple, non-invasive technique for diagnosis.Current research exploits the shear wave fields in body tissue to detect andanalyze coronary stenoses. The methods and ideas outlined in earlier efforts [6] includinga mathematical model utilizing an internal strain variable approximation tothe quasi-linear viscoelastic constitutive equation proposed by Fung in [19] is extendedhere. As an initial investigation, a homogeneous two-dimensional viscoelastic geometryis considered. Being uniform in θ, this geometry behaves as a one dimensionalmodel, and the results generated from it are compared to the one dimensional resultsfrom [6]. To allow for different assumptions on the elastic response, several variationsof the model are considered. A statistical significance test is employed to determine ifthe more complex models are significant improvements. After calibrating the modelwith a comparison to previous findings, more complicated geometries are considered.Simulations involving a heterogeneous geometrywith a uniformring running throughthe original medium, a θ-dependent model which considers a rigid partial occlusionformed along the inner radius of the geometry, and a model which combines the ringand occlusion are presented.
文摘Two-dimensional scalar equation for the displacement of steady cross-plane shear (SH) waves in homogeneous and transversely isotropic media like unidirectional fibrous com-posites is given. Then, thrbugh a simple coordinate system transform, the scalar equation is standardized into a Helmholtz equation. Corresponding integral equations are derived for the scattering problems and boundary element method (BEM) is used to calculate the scattered fields of arbitrarily shaped obstacles with both soft and rigid boudary conditions numerically.A discussion is given on the numerical results which is mainly focused on the influence of the a-nisotropy of the media to the directivity of the scattered fields by circular cylindrical voids.
基金Russian Foundation for Basic Research,grant number 18-05-70002.
文摘Cyclic freezing-thawing can lead to fracture development in coal,affecting its mechanical and consumer properties.To study crack formations in coal,an ultrasonic sounding method using shear polarized waves was proposed.Samples of three coal types(anthracite,lignite and hard coal)were tested.The research results show that,in contrast to the shear wave velocity,the shear wave amplitude is extremely sensitive to the formation of new cracks at the early stages of cyclic freezing-thawing.Tests also show an inverse correlation between coal compressive strength and its tendency to form cracks under temperature impacts;shear wave attenuation increases more sharply in high-rank coals after the first freezing cycle.Spectral analysis of the received signals also confirmed significant crack formation in anthracite after the first freeze-thaw cycle.The initial anisotropy was determined,and its decrease with an increase in the number of freeze-thaw cycles was shown.The data obtained forms an experimental basis for the development of new approaches to preserve coal consumer properties during storage and transportation under severe natural and climatic conditions.
基金Supported by the National Natural Science Foundation of China Youth Training Project,No.2021GZR003and Medical-engineering Interdisciplinary Research Youth Training Project,No.2022YGJC001.
文摘BACKGROUND Integrating conventional ultrasound features with 2D shear wave elastography(2D-SWE)can potentially enhance preoperative hepatocellular carcinoma(HCC)predictions.AIM To develop a 2D-SWE-based predictive model for preoperative identification of HCC.METHODS A retrospective analysis of 884 patients who underwent liver resection and pathology evaluation from February 2021 to August 2023 was conducted at the Oriental Hepatobiliary Surgery Hospital.The patients were divided into the modeling group(n=720)and the control group(n=164).The study included conventional ultrasound,2D-SWE,and preoperative laboratory tests.Multiple logistic regression was used to identify independent predictive factors for RESULTS In the modeling group analysis,maximal elasticity(Emax)of tumors and their peripheries,platelet count,cirrhosis,and blood flow were independent risk indicators for malignancies.These factors yielded an area under the curve of 0.77(95%confidence interval:0.73-0.81)with 84%sensitivity and 61%specificity.The model demonstrated good calibration in both the construction and validation cohorts,as shown by the calibration graph and Hosmer-Lemeshow test(P=0.683 and P=0.658,respectively).Additionally,the mean elasticity(Emean)of the tumor periphery was identified as a risk factor for microvascular invasion(MVI)in malignant liver tumors(P=0.003).Patients receiving antiviral treatment differed significantly in platelet count(P=0.002),Emax of tumors(P=0.033),Emean of tumors(P=0.042),Emax at tumor periphery(P<0.001),and Emean at tumor periphery(P=0.003).CONCLUSION 2D-SWE’s hardness value serves as a valuable marker for enhancing the preoperative diagnosis of malignant liver lesions,correlating significantly with MVI and antiviral treatment efficacy.
文摘The discrete element method(DEM)is a capable tool used to simulate shear wave propagation in granular assemblies for many years.Researchers have studied assembly shapes such as rectangles(in 2D simulations)or cylinders and cubes(in 3D simulations).This paper aimed to qualify the effect of assembly shape on the shear wave propagation and maximum amplification in the vertical plane(horizontal and vertical directions)caused by this propagation.To this end,shear wave propagations in different assembly shapes such as rectangle,trapezium,and triangle with rigid boundary conditions were simulated.A sine wave pulse was applied with a point source by moving a particle as the transmitter particle.To evaluate the shear wave velocity of the assemblies,the transmitter and receiver particles were simulated.All the simulations were performed with 2D DEM which is a useful tool to determine the amount and location of the maximum amplification factor of the assembly in both horizontal and vertical directions.An advantage of this study was assessing the effect of parameters such as input wave frequency,assembly height,shape,and aspect ratios on the amplification of the input waves.
基金Supported by Sichuan Orthopaedic Hospital Research Project,No.2019MS02.
文摘BACKGROUND Real-time shear wave elastography(SWE)is a non-invasive imaging technique used to measure tissue stiffness by generating and tracking shear waves in real time.This advanced ultrasound-based method provides quantitative information regarding tissue elasticity,offering valuable insights into the mechanical properties of biological tissues.However,the application of real-time SWE in the musculoskeletal system and sports medicine has not been extensively studied.AIM To explore the practical value of real-time SWE for assessing Achilles tendon hardness in older adults.METHODS A total of 60 participants were enrolled in the present study,and differences in the elastic moduli of the bilateral Achilles tendons were compared among the following categories:(1)Age:55-60,60-65,and 65-70-years-old;(2)Sex:Male and female;(3)Laterality:Left and right sides;(4)Tendon state:Relaxed and tense state;and(5)Tendon segment:Proximal,middle,and distal.RESULTS There were no significant differences in the elastic moduli of the bilateral Achilles tendons when comparing by age or sex(P>0.05).There were,however,significant differences when comparing by tendon side,state,or segment(P<0.05).CONCLUSION Real-time SWE plays a significant role compared to other examination methods in the evaluation of Achilles tendon hardness in older adults.
基金Project supported by the National Natural Science Foundation of China(Grant No.11405271)the China Postdoctoral Science Foundation(Grant No.2017M612901)+4 种基金the Fund from Chongqing Science and Technology Commission(Grant No.cstc2017jcyjAX0047)Chongqing Postdoctoral Special Foundation(Grant No.Xm2017109)the Fundamental Research Funds for Central Universities,China(Grant No.YJ201796)the Pre-research Key Laboratory Fund for Equipment(Grant No.61422070306)the Fund from the Laboratory of Advanced Space Propulsion(Grant No.LabASP-2017-10)
文摘Characterizing the gap eigenmode of shear Alfv′en waves(SAWs) and its interaction with energetic ions is important to the success of magnetically confined fusion. Previous studies have reported an experimental observation of the spectral gap of SAW on the on Large Plasma Device(LAPD)(Zhang et al. 2008 Phys. Plasmas 15 012103), a linear large plasma device(Gekelman et al. 1991 Rev. Sci. Instrum. 62 2875) possessing easier diagnostic access and lower cost compared with traditional fusion devices, and analytical theory and numerical gap eigenmode using ideal conditions(Chang 2014 Ph.D Thesis at Australian National University). To guide experimental implementation, the present work models the gap eigenmode of SAWs using exact LAPD parameters. A full picture of the wave field for previous experiment reveals that the previously observed spectral gap is not global but an axially local result. To form a global spectral gap, the number of magnetic mirrors has to be increased and stronger static magnetic field makes it clearer. Such a spectral gap is obtained for the magnetic field of B0(z) = 1.2 + 0.6 cos[2π(z-33.68)/3.63] with 7.74-m magnetic beach. By introducing two types of local defects(corresponding to Eθ(z0) = 0 and E’θ(z0) = 0 respectively), odd-parity and even-parity discrete eigenmodes are formed clearly inside the gap. The strength of these gap eigenmodes decreases significantly with collision frequency, which is consistent with previous studies. Parameter scans show that these gap eigenmodes can be even formed successfully for the field strength of B0(z) = 0.2 + 0.1 cos[2π(z-33.68)/3.63] and with only four magnetic mirrors, which are achievable by the LAPD at its present status. This work can serve as a strong motivation and direct reference for the experimental implementation of the gap eigenmode of SAWs on the LAPD and other linear plasma devices.
基金supported by the National Key R&D Program of China(Grant No.2022YFC2402400)the National Natural Science Foundation of China(Grant No.62275062)and Guangdong Provincial Key Laboratory of Biomedical Optical Imaging Technology(Grant No.2020B121201010-4).
文摘Elastography can be used as a diagnostic method for quantitative characterization of tissue hardness information and thus,differential changes in pathophysiological states of tissues.In this study,we propose a new method for shear wave elastography(SWE)based on laser-excited shear wave,called photoacoustic shear wave elastography(PASWE),which combines photoacoustic(PA)technology with ultrafast ultrasound imaging.By using a focused laser to excite shear waves and ultrafast ultrasonic imaging for detection,high-frequency excitation of shear waves and noncontact elastic imaging can be realized.The laser can stimulate the tissue with the light absorption characteristic to produce the thermal expansion,thus producing the shear wave.The frequency of shear wave induced by laser is higher and the frequency band is wider.By tracking the propagation of shear wave,Young’s modulus of tissue is reconstructed in the whole shear wave propagation region to further evaluate the elastic information of tissue.The feasibility of the method is verified by experiments.Compared with the experimental results of supersonic shear imaging(SSI),it is proved that the method can be used for quantitative elastic imaging of the phantoms.In addition,compared with the SSI method,this method can realize the noncontact excitation of the shear wave,and the frequency of the shear wave excited by the laser is higher than that of the acoustic radiation force(ARF),so the spatial resolution is higher.Compared to the traditional PA elastic imaging method,this method can obtain a larger imaging depth under the premise of ensuring the imaging resolution,and it has potential application value in the clinical diagnosis of diseases requiring noncontact quantitative elasticity.
