Evaluation of hydromechanical shear behavior of unsaturated soils is still a challenging issue. The time and cost needed for conducting precise experimental investigation on shear behavior of unsaturated soils have en...Evaluation of hydromechanical shear behavior of unsaturated soils is still a challenging issue. The time and cost needed for conducting precise experimental investigation on shear behavior of unsaturated soils have encouraged several investigators to develop analytical, empirical, or semi-empirical models for predicting the shear behavior of unsaturated soils. However, most of the previously proposed models are for specimens subjected to the isotropic state of stress, without considering the effect of initial shear stress. In this study, a hydromechanical constitutive model is proposed for unsaturated collapsible soils during shearing, with consideration of the effect of the initial shear stress. The model implements an effective stress-based disturbed state concept (DSC) to predict the stress-strain behavior of the soil. Accordingly, material/state variables were defined for both the start of the shearing stage and the critical state of the soil. A series of laboratory tests was performed using a fully automated unsaturated triaxial device to verify the proposed model. The experimental program included 23 suction-controlled unsaturated triaxial shear tests on reconstituted specimens of Gorgan clayey loess wetted to different levels of suctions under both isotropic and anisotropic stress states. The results show excellent agreement between the prediction by the proposed model and the experimental results.展开更多
0 INTRODUCTION During the geological evolution process,tectonic activities coupled with anthropogenic engineering disturbances have collectively contributed to the development of complex fracture-filling networks with...0 INTRODUCTION During the geological evolution process,tectonic activities coupled with anthropogenic engineering disturbances have collectively contributed to the development of complex fracture-filling networks within rock masses(Feng et al.,2024;Tan et al.,2020;Li et al.,2019).The particle size distribution of infilling materials within fractures is susceptible to multiple controlling factors,including material composition,seepage-induced erosion,and tectonic disturbances(Zhang et al.,2024;Tan et al.,2023).展开更多
The damage of rock joints or fractures upon shear includes the surface damage occurring at the contact asperities and the damage beneath the shear surface within the host rock.The latter is commonly known as off-fault...The damage of rock joints or fractures upon shear includes the surface damage occurring at the contact asperities and the damage beneath the shear surface within the host rock.The latter is commonly known as off-fault damage and has been much less investigated than the surface damage.The main contribution of this study is to compare the results of direct shear tests conducted on saw-cut planar joints and tension-induced rough granite joints under normal stresses ranging from 1 MPa to 50 MPa.The shear-induced off-fault damages are quantified and compared with the optical microscope observation.Our results clearly show that the planar joints slip stably under all the normal stresses except under 50 MPa,where some local fractures and regular stick-slip occur towards the end of the test.Both post-peak stress drop and stick-slip occur for all the rough joints.The residual shear strength envelopes for the rough joints and the peak shear strength envelope for the planar joints almost overlap.The root mean square(RMS)of asperity height for the rough joints decreases while it increases for the planar joint after shear,and a larger normal stress usually leads to a more significant decrease or increase in RMS.Besides,the extent of off-fault damage(or damage zone)increases with normal stress for both planar and rough joints,and it is restricted to a very thin layer with limited micro-cracks beneath the planar joint surface.In comparison,the thickness of the damage zone for the rough joints is about an order of magnitude larger than that of the planar joints,and the coalesced micro-cracks are generally inclined to the shear direction with acute angles.The findings obtained in this study contribute to a better understanding on the frictional behavior and damage characteristics of rock joints or fractures with different roughness.展开更多
Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear be...Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear behavior of rock joint under this condition. In the present study, synthetic rock joints were prepared with plaster of Paris(Po P). Regular joints were simulated by keeping regular asperity with asperity angles of 15°-15° and 30°-30°, and irregular rock joints which are closer to natural joints were replicated by keeping the asperity angles of 15°-30° and 15°-45°. The sample size and amplitude of roughness were kept the same for both regular and irregular joints which were 298 mm×298 mm×125 mm and 5 mm, respectively. Shear test was performed on these joints using a large-scale direct shear testing machine by keeping the frequency and amplitude of shear load under constant cyclic condition with different normal stress values. As expected, the shear strength of rock joints increased with the increases in the asperity angle and normal load during the first cycle of shearing or static load. With the increase of the number of shear cycles, the shear strength decreased for all the asperity angles but the rate of reduction was more in case of high asperity angles. Test results indicated that shear strength of irregular joints was higher than that of regular joints at different cycles of shearing at low normal stress. Shearing and degradation of joint asperities on regular joints were the same between loading and unloading, but different for irregular joints. Shear strength and joint degradation were more significant on the slope of asperity with higher angles on the irregular joint until two angles of asperities became equal during the cycle of shearing and it started behaving like regular joints for subsequent cycles.展开更多
Experiments on rock joint behaviors have shown that joint surface roughness is mobilized under shearing,inducing dilation and resulting in nonlinear joint shear strength and shear stress vs.shear displacement behavior...Experiments on rock joint behaviors have shown that joint surface roughness is mobilized under shearing,inducing dilation and resulting in nonlinear joint shear strength and shear stress vs.shear displacement behaviors.The Barton-Bandis(B-B) joint model provides the most realistic prediction for the nonlinear shear behavior of rock joints.The B-B model accounts for asperity roughness and strength through the joint roughness coefficient(JRC) and joint wall compressive strength(JCS) parameters.Nevertheless,many computer codes for rock engineering analysis still use the constant shear strength parameters from the linear Mohr-Coulomb(M-C) model,which is only appropriate for smooth and non-dilatant joints.This limitation prevents fractured rock models from capturing the nonlinearity of joint shear behavior.To bridge the B-B and the M C models,this paper aims to provide a linearized implementation of the B-B model using a tangential technique to obtain the equivalent M-C parameters that can satisfy the nonlinear shear behavior of rock joints.These equivalent parameters,namely the equivalent peak cohesion,friction angle,and dilation angle,are then converted into their mobilized forms to account for the mobilization and degradation of JRC under shearing.The conversion is done by expressing JRC in the equivalent peak parameters as functions of joint shear displacement using proposed hyperbolic and logarithmic functions at the pre-and post-peak regions of shear displacement,respectively.Likewise,the pre-and post-peak joint shear stiffnesses are derived so that a complete shear stress-shear displacement relationship can be established.Verifications of the linearized implementation of the B-B model show that the shear stress-shear displacement curves,the dilation behavior,and the shear strength envelopes of rock joints are consistent with available experimental and numerical results.展开更多
In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock j...In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock joint surface were precisely calculated by means of a three-dimensional laser scanning machine.All test results were analyzed to investigate the shear behavior and normal displacement behavior of rock joints under CNL conditions.Degradation of rock joint surface during cyclic shear tests was also analyzed.The comparison results of the height parameters and the hybrid parameters of the joint surface during cyclic tests show that the degradation of the surface mostly happens in the first shear and the constant normal loads imposed on the joints have significant promotion effects on the morphology degradation.During cyclic shear tests,joints surfaces evolve from rough state to smooth state but keep an overall undulation.Dilatancy of rock joints degrades with the degradation of joint surface and the increase of normal loads.The closure deformation of joint is larger than that of the intact rock,and the normal stiffness increases with the increase of shearing times.展开更多
Rock bolts have been widely used for stabilizing rock mass in geotechnical engineering.It is acknowledged that the bolt profiles have a sound influence on the support effect of the rock bolting system.Previous studies...Rock bolts have been widely used for stabilizing rock mass in geotechnical engineering.It is acknowledged that the bolt profiles have a sound influence on the support effect of the rock bolting system.Previous studies have proposed some optimal rib parameters(e.g.rib spacing);unfortunately,the interface shear behaviors are generally ignored.Therefore,determination of radial stress and radial displacement on the bolt-grout interface using traditional pull-out tests is not possible.The load-bearing capacity and deformation capacity vary as bolt profiles differ,suggesting that the support effect of the bolting system can be enhanced by optimizing bolt profiles.The aim of this study is to investigate the effects of bolt profiles(with/without ribs,rib spacing,and rib height)on the shear behaviors between the rock bolt and grout material using direct shear tests.Thereby,systematic interfacial shear tests with different bolt profiles were performed under both constant normal load(CNL)and constant normal stiffness(CNS)boundary conditions.The results suggested that rib spacing has a more marked influence on the interface shear behavior than rib height does,in particular at the post-yield stage.The results could facilitate our understanding of bolt-grout interface shear behavior under CNS conditions,and optimize selection of rock bolts under in situ rock conditions.展开更多
A filter cake is often formed between soil and concrete during casting concrete in the ground,such as constructions of diaphragm walls and bored piles.The present study aims to investigate the effect of the filter cak...A filter cake is often formed between soil and concrete during casting concrete in the ground,such as constructions of diaphragm walls and bored piles.The present study aims to investigate the effect of the filter cake on the shear behavior of the sand-concrete pile interface.A series of sand-concrete interface direct shear tests were performed with a large-direct shear apparatus while considering different roughness(I=0,10,20 and 30 mm)and filter cake thickness(Δh=0,5 and 10 mm).For a smooth interface without a filter cake,the shear stress-horizontal displacement curves showed a“softening”response.The peak shear strength and friction angle decreased exponentially with increasing theΔh.Whereas,for a rough interface withΔh=5 or 10 mm,the shear stress-horizontal displacement curves presented a“hardening”response.The peak strength,as well as friction angle,decreased linearly with increasing theΔh.Moreover,a critical roughness I_(cr)of 10 mm was observed in the tests without a filter cake.The interface shear strength initially increased with increasing I but gradually decreased when the I exceeded I_(cr).In addition,the filter cake could reduce the roughness sensitivity on shear strength.展开更多
The loading direction-dependent shear behavior of single-layer chiral graphene sheets at different temperatures is studied by molecular dynamics （MD） simulations. Our results show that the shear properties （such as...The loading direction-dependent shear behavior of single-layer chiral graphene sheets at different temperatures is studied by molecular dynamics （MD） simulations. Our results show that the shear properties （such as shear stress-strain curves, buckling strains, and failure strains） of chiral graphene sheets strongly depend on the loading direction due to the structural asymmetry. The maximum values of both the critical buckling shear strain and the failure strain under positive shear deformation can be around 1.4 times higher than those under negative shear deformation. For a given chiral graphene sheet, both its failure strain and failure stress decrease with increasing temperature. In particular, the amplitude to wavelength ratio of wrinkles for different chiral graphene sheets under shear deformation using present MD simulations agrees well with that from the existing theory. These findings provide physical insights into the origins of the loading direction-dependent shear behavior of chiral graphene sheets and their potential applications in nanodevices.展开更多
Direct shear tests were conducted on the rock joints under constant normal load(CNL), while the acoustic emission(AE) signals generated during shear tests were monitored with PAC Micro-II system. Before and after shea...Direct shear tests were conducted on the rock joints under constant normal load(CNL), while the acoustic emission(AE) signals generated during shear tests were monitored with PAC Micro-II system. Before and after shearing, the surfaces of rock joints were measured by the Talysurf CLI 2000. By correlating the AE events with the shear stress-shear displacement curve, one can observe four periods of the whole course of shearing of rock joints. By the contrast of AE location and actual damage zone, it is elucidated that the AE event is related to the morphology of the joint. With the increase of shearing times, the shear behavior of rock joints gradually presents from the response of brittle behavior to that of ductile behavior. By combining the results of topography measurement, four morphological parameters of joint surface, S p(the maximum height of joint surface), N(number of islands), A(projection area) and V(volume of joint) were introduced, which decrease with shearing. Both the joint roughness coefficient(JRC) and joint matching coefficient(JMC) drop with shearing, and the shear strength of rock joints can be predicted by the JRC-JMC model. It establishes the relationship between micro-topography and macroscopic strength, which have the same change rule with shearing.展开更多
The shear punch test(SPT)is a suitable experiment for characterizing the shear behavior of various materials,especially where there are volume limitations.In the present investigation,the relations among various param...The shear punch test(SPT)is a suitable experiment for characterizing the shear behavior of various materials,especially where there are volume limitations.In the present investigation,the relations among various parameters such as clearance,die diameter and sample thickness,and the yield and ultimate shear strengths of AZ80Mg alloy were studied.Moreover,based on the Mohr-Coulomb theory,relatively optimum conditions were introduced for the shear punch test.With this regard,a range of2%-10%is found to be suitable for the clearance/sheet thickness ratio.To provide a simple shear stress state during a shear punch test,it is also necessary to select the die diameter/sheet thickness ratio between2:1and10:1.Based on the predictions of the Mohr-Coulomb theory,it is better to conduct a room-temperature shear punch test with a sample thickness of0.5mm,a clearance of25μm and a die diameter of2mm.Finally,the mean conversion factors to gain the tensile and compressive yield strengths of the cast AZ80from its shear one are found to be1.70and3.09,respectively.展开更多
The shear behavior of a single rock joint in limestone specimens,under a constant normal load(CNL),was analyzed in this study.Test specimens with different asperity roughness were prepared and tested.Goodman's mod...The shear behavior of a single rock joint in limestone specimens,under a constant normal load(CNL),was analyzed in this study.Test specimens with different asperity roughness were prepared and tested.Goodman's model of a rock joint's shear behavior,under CNL,was modified to render a better representation of the data obtained.The model's applicability was validated.The proposed model showed better correlation with experimental data.It also,requires fewer variables.The steps to calculate all the necessary variables for the model are discussed.展开更多
Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to q...Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include： 1） under monotonic loading, P_v is the most significant factor; the shear resistance P_（hmax） increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2） for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_（max） varies from 3 mm to 15 mm; 3） under cyclic loading, the interface behavior can be abstracted as a ＂three-segment＂ back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4） by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained.展开更多
Prestressed steel ultrahigh-strength reinforced concrete(PSURC) beam is a new type of prestressed concrete beam, which not only has a considerable compressive strength attributed to the ultrahigh strength concrete, bu...Prestressed steel ultrahigh-strength reinforced concrete(PSURC) beam is a new type of prestressed concrete beam, which not only has a considerable compressive strength attributed to the ultrahigh strength concrete, but also ensures a certain degree of ductility at failure due to the existence of structural steel. Five of these beams were monotonically tested until shear failure to investigate the static shear performance including the failure pattern, loaddeflection behavior, shear capacity, shear crack width and shear ductility. The experimental results show that these beams have superior shear capacity, crack control ability and shear ductility. To study the shear performance under repeated overloading, seven PSURC beams were loaded in cyclic test simultaneously. The overall shear performance of cycled beams is similar to that of uncycled beams at low load level but different at high load level. The shear capacity and crack control ability of cycled beams at high load level are reduced, whereas the shear ductility is improved. In addition, the influences of variables including the degree of prestress, stirrup ratio and load level on the shear performance of both uncycled and cycled beams were also discussed and compared, respectively.展开更多
Steel and ultra⁃high performance concrete(UHPC)composite decks are effective at reducing fatigue cracking and asphalt pavement damage.The shear behavior of innovative open steel tube(OST)connectors in steel⁃UHPC compo...Steel and ultra⁃high performance concrete(UHPC)composite decks are effective at reducing fatigue cracking and asphalt pavement damage.The shear behavior of innovative open steel tube(OST)connectors in steel⁃UHPC composite decks was investigated by conducting push⁃out tests.The test parameter is the presence of reinforcement in the deck.The load⁃slip curves and shear behavior of the push⁃out specimens were obtained and discussed.The test results indicate that as compared with plain concrete specimens,the limit slip of reinforced specimens decreased by 32%and the shear stiffness increased by 10%,but the ultimate shear capacity was almost the same.The use of UHPC influenced the failure process as it was observed that the OST connector was sheared off at its lower semi⁃tube,followed by the pull⁃out failure of the upper semi⁃tube.A finite element model was verified by tests and was then used to analyze the deformation and failure behaviors of the composite deck with open tubes.The model demonstrates that there is a stress concentration zone at the connector root,and the lower semi⁃tube is the main component that is subject to loads.展开更多
To study the shear behavior of the ultrafine magnetite tailings subjected to freeze-thaw cycles,unconsolidated-undrained shear tests were conducted on ultrafine-grained tailings that were subjected to 1-11 cycles of f...To study the shear behavior of the ultrafine magnetite tailings subjected to freeze-thaw cycles,unconsolidated-undrained shear tests were conducted on ultrafine-grained tailings that were subjected to 1-11 cycles of freeze-thaw and defined as a type of clayey silt under confining pressures of 100,200,and 300 kPa.Taking the number of freeze-thaw cycles,cooling temperature,initial dry density,and moisture content as the four main influencing factors of shear behavior of the tailings samples,the shear stress-strain curve,compression modulus,failure strength,cohesion,and internal friction angle were measured.The results show that the freeze-thaw cycle has an obvious weakening effect on the shear behavior of the tailings material,and the shear mechanical parameters are affected by a combination of confining pressure,freeze-thaw cycle condition,and initial physical-mechanical properties of the tailings samples.Through the microstructural analysis of the tailings samples subjected to freeze-thaw cycles,it shows that the freeze-thaw cycle mainly affects the porosity,bound water,and arrangement of the tailings particles.Subsequently,the macroscopic changes in shear strength indexes emerge,and then the stability of the tailings dam will decrease.展开更多
Glacial tills are widely distributed in Tibet, China, and are highly susceptible to landslides under intense rainfalls. Failures of the slope during rainfall are closely related to the shear behavior of glacial tills ...Glacial tills are widely distributed in Tibet, China, and are highly susceptible to landslides under intense rainfalls. Failures of the slope during rainfall are closely related to the shear behavior of glacial tills at different moisture conditions. This study investigates the shear behavior and critical state of saturated and unsaturated glacial tills through a series of drained direct shear tests. The tests were conducted on two types of compacted glacial tills with different water contents and total normal stresses. A strain softening mode of failure is observed for all water content conditions accompanied by noticeable dilation. Dilatancy is found to decrease with increasing water content. Unsaturated samples showed increased rates of dilation as water content is decreased for all applied normal stresses a behavior which cannot be predicted well by classical stressdilatancy models. Furthermore, it was found that the Critical State Line(CSL), plotted on the(e-ln) plane, can be used to define the shear behavior of unsaturated glacial tills at different water contents.The CSL of saturated glacial tills run parallel to this line. The experimental results in this study are aimed to provide a basic understanding to the underlying failure mechanisms of glacial tills.展开更多
In order to study the calculation methods of shear behavior of reinforced concrete beams of Chinese modern reinforced concrete buildings,this paper carried out tests on the concrete compressive strength of 12 Chinese ...In order to study the calculation methods of shear behavior of reinforced concrete beams of Chinese modern reinforced concrete buildings,this paper carried out tests on the concrete compressive strength of 12 Chinese modern concrete buildings,the mechanical properties of 66 rebars from different Chinese modern concrete buildings,and the concrete cover thickness of 9 Chinese modern concrete buildings,and the actual material properties and structural configurations have been obtained. Then,the comparison on calculation methods include the Chinese original calculation method,the Chinese present calculation method,the American present calculation method and the European present calculation method is studied with case analysis method.The results show that the Chinese original calculation method of shear behavior of reinforced concrete beams is based on the allowable stress calculation method,and the design safety factors are 3. 55- 4. 00. The standard value of the compressive strength of concrete cubes is 8. 48 MPa,the standard value of the concrete tensile strength is 1.20 MPa,the standard value of the yield strength of rectangular rebars is 229. 56 MPa,and the standard value of the yield strength of round rebars is 276. 82 MPa. The average value of the concrete cover thickness of beams and columns is 35.96 mm. In term of calculation area of hoop rebars of reinforced concrete beams,without considering earthquake loads,the Chinese original structural calculation method is safer than the Chinese present structural calculation method,but is more unsafe than the American present structural calculation method and the European present structural calculation method. The results can provide the support for structural safety assessments and repair designs of Chinese modern reinforced concrete buildings.展开更多
Shallow gas can cause many disasters,and it is reported in many marine engineering constructions.For this,it is imperative to understand the impact of gas on the mechanical behaviors of soil.This study investigated th...Shallow gas can cause many disasters,and it is reported in many marine engineering constructions.For this,it is imperative to understand the impact of gas on the mechanical behaviors of soil.This study investigated the influence of undrained triaxial compression tests on dense gassy sand commonly encountered in coastal areas.Triaxial tests were performed on specimens with saturations of 100%,99.8%,95.9%,and 92.7% under confining pressures of 50 kPa and 200 kPa by a self-developed multipurpose integrated triaxial apparatus(MITA)for gassy soil.The results are presented in terms of monotonic stress‒strain behavior,volumetric behavior,shear strength,and excess pore water pressure(EPWP).The occurrence of gas bubbles has different effects on loose and dense sands,augmenting the undrained shear strength of loose sand while concurrently diminishing that of dense sand.The deviatoric stress of dense sand increases during shear shrinkage,which is similar to the characteristics of loose sand under the influence of gas bubbles.However,following sand dilation,the effect of gas bubbles on deviatoric stress manifests in an antithetical manner.With elevated gas content,the shear strength of dense sand decreases,accompanied by a deceleration in the development of EPWP and a notable increase in volumetric changes.To this end,a microscopic explanation concerning the deformation and evolution of gas bubbles within sand during the shear process was presented to reveal the macroscopic laws governing the undrained shear attributes of dense gassy sand.展开更多
Bimrocks are characterized by their geotechnically significant blocky structure,presenting complex shear behavior.This study investigates the shear behavior and dilatancy of bimrocks featuring a rock-like matrix,such ...Bimrocks are characterized by their geotechnically significant blocky structure,presenting complex shear behavior.This study investigates the shear behavior and dilatancy of bimrocks featuring a rock-like matrix,such as conglomerates.The study addresses a gap in current research,which has predominantly examined the shear behavior of soil-matrix bimrocks(bimsoils).Laboratory direct shear tests were performed on idealized models with varying volumetric block proportions(VBPs).The results highlight that blocks exert both positive and negative effects on shear strength,dilation,and block breakage factor(BF),depending on VBP.Results indicate 40%and 60%as critical VBPs,revealing distinct shear strength trends within this range,contrary to the dominant downward trend.Blocks positively impact dilation and BF between 20%and 50%VBP,while negatively affecting them beyond this range.Blocky skeleton inherently promotes stable dilatancy under normal stress increments and intensifies stress dependency of shear strength.Variations in dilation angle concerning normal stress and VBP suggest the potential for characterizing this factor using equivalent strength and roughness,akin to rockfill materials.Indirect assessments of equivalent strength revealed positive effects of blocks when VBP was between 30%and 70%.Lastly,the findings indicate that blocks notably impact pre-and post-peak behaviors by reducing shear stiffness and inducing local hardening phases.This study also discusses the similarities and distinctions in the function of blocks within soil-like and rock-like matrices.It offers new insights into the exact role of blocks in bimrock shear behavior beyond the traditional interpretation through the variation of friction and cohesion.展开更多
文摘Evaluation of hydromechanical shear behavior of unsaturated soils is still a challenging issue. The time and cost needed for conducting precise experimental investigation on shear behavior of unsaturated soils have encouraged several investigators to develop analytical, empirical, or semi-empirical models for predicting the shear behavior of unsaturated soils. However, most of the previously proposed models are for specimens subjected to the isotropic state of stress, without considering the effect of initial shear stress. In this study, a hydromechanical constitutive model is proposed for unsaturated collapsible soils during shearing, with consideration of the effect of the initial shear stress. The model implements an effective stress-based disturbed state concept (DSC) to predict the stress-strain behavior of the soil. Accordingly, material/state variables were defined for both the start of the shearing stage and the critical state of the soil. A series of laboratory tests was performed using a fully automated unsaturated triaxial device to verify the proposed model. The experimental program included 23 suction-controlled unsaturated triaxial shear tests on reconstituted specimens of Gorgan clayey loess wetted to different levels of suctions under both isotropic and anisotropic stress states. The results show excellent agreement between the prediction by the proposed model and the experimental results.
基金supported by the National Natural Science Foundation of China(No.42090054)。
文摘0 INTRODUCTION During the geological evolution process,tectonic activities coupled with anthropogenic engineering disturbances have collectively contributed to the development of complex fracture-filling networks within rock masses(Feng et al.,2024;Tan et al.,2020;Li et al.,2019).The particle size distribution of infilling materials within fractures is susceptible to multiple controlling factors,including material composition,seepage-induced erosion,and tectonic disturbances(Zhang et al.,2024;Tan et al.,2023).
基金financial support from Taishan Scholars Program(Grant No.2019KJG002)National Natural Science Foundation of China(Grant Nos.42272329 and 52279116).
文摘The damage of rock joints or fractures upon shear includes the surface damage occurring at the contact asperities and the damage beneath the shear surface within the host rock.The latter is commonly known as off-fault damage and has been much less investigated than the surface damage.The main contribution of this study is to compare the results of direct shear tests conducted on saw-cut planar joints and tension-induced rough granite joints under normal stresses ranging from 1 MPa to 50 MPa.The shear-induced off-fault damages are quantified and compared with the optical microscope observation.Our results clearly show that the planar joints slip stably under all the normal stresses except under 50 MPa,where some local fractures and regular stick-slip occur towards the end of the test.Both post-peak stress drop and stick-slip occur for all the rough joints.The residual shear strength envelopes for the rough joints and the peak shear strength envelope for the planar joints almost overlap.The root mean square(RMS)of asperity height for the rough joints decreases while it increases for the planar joint after shear,and a larger normal stress usually leads to a more significant decrease or increase in RMS.Besides,the extent of off-fault damage(or damage zone)increases with normal stress for both planar and rough joints,and it is restricted to a very thin layer with limited micro-cracks beneath the planar joint surface.In comparison,the thickness of the damage zone for the rough joints is about an order of magnitude larger than that of the planar joints,and the coalesced micro-cracks are generally inclined to the shear direction with acute angles.The findings obtained in this study contribute to a better understanding on the frictional behavior and damage characteristics of rock joints or fractures with different roughness.
基金the financial support of this research from Indian Institute of Technology Delhi
文摘Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear behavior of rock joint under this condition. In the present study, synthetic rock joints were prepared with plaster of Paris(Po P). Regular joints were simulated by keeping regular asperity with asperity angles of 15°-15° and 30°-30°, and irregular rock joints which are closer to natural joints were replicated by keeping the asperity angles of 15°-30° and 15°-45°. The sample size and amplitude of roughness were kept the same for both regular and irregular joints which were 298 mm×298 mm×125 mm and 5 mm, respectively. Shear test was performed on these joints using a large-scale direct shear testing machine by keeping the frequency and amplitude of shear load under constant cyclic condition with different normal stress values. As expected, the shear strength of rock joints increased with the increases in the asperity angle and normal load during the first cycle of shearing or static load. With the increase of the number of shear cycles, the shear strength decreased for all the asperity angles but the rate of reduction was more in case of high asperity angles. Test results indicated that shear strength of irregular joints was higher than that of regular joints at different cycles of shearing at low normal stress. Shearing and degradation of joint asperities on regular joints were the same between loading and unloading, but different for irregular joints. Shear strength and joint degradation were more significant on the slope of asperity with higher angles on the irregular joint until two angles of asperities became equal during the cycle of shearing and it started behaving like regular joints for subsequent cycles.
基金support from the University Transportation Center for Underground Transportation Infrastructure at the Colorado School of Mines for partially funding this research under Grant No.69A3551747118 of the Fixing America's Surface Transportation Act(FAST Act) of U.S.DoT FY2016
文摘Experiments on rock joint behaviors have shown that joint surface roughness is mobilized under shearing,inducing dilation and resulting in nonlinear joint shear strength and shear stress vs.shear displacement behaviors.The Barton-Bandis(B-B) joint model provides the most realistic prediction for the nonlinear shear behavior of rock joints.The B-B model accounts for asperity roughness and strength through the joint roughness coefficient(JRC) and joint wall compressive strength(JCS) parameters.Nevertheless,many computer codes for rock engineering analysis still use the constant shear strength parameters from the linear Mohr-Coulomb(M-C) model,which is only appropriate for smooth and non-dilatant joints.This limitation prevents fractured rock models from capturing the nonlinearity of joint shear behavior.To bridge the B-B and the M C models,this paper aims to provide a linearized implementation of the B-B model using a tangential technique to obtain the equivalent M-C parameters that can satisfy the nonlinear shear behavior of rock joints.These equivalent parameters,namely the equivalent peak cohesion,friction angle,and dilation angle,are then converted into their mobilized forms to account for the mobilization and degradation of JRC under shearing.The conversion is done by expressing JRC in the equivalent peak parameters as functions of joint shear displacement using proposed hyperbolic and logarithmic functions at the pre-and post-peak regions of shear displacement,respectively.Likewise,the pre-and post-peak joint shear stiffnesses are derived so that a complete shear stress-shear displacement relationship can be established.Verifications of the linearized implementation of the B-B model show that the shear stress-shear displacement curves,the dilation behavior,and the shear strength envelopes of rock joints are consistent with available experimental and numerical results.
基金Project(51274249)supported by the National Natural Science Foundation of ChinaProject(2015zzts076)supported by the Explore Research Fund for Graduate Students of ChinaProject(201406)supported by the Hunan Key Laboratory of Coal Resources and Safe Mining Open-end Funds,China
文摘In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock joint surface were precisely calculated by means of a three-dimensional laser scanning machine.All test results were analyzed to investigate the shear behavior and normal displacement behavior of rock joints under CNL conditions.Degradation of rock joint surface during cyclic shear tests was also analyzed.The comparison results of the height parameters and the hybrid parameters of the joint surface during cyclic tests show that the degradation of the surface mostly happens in the first shear and the constant normal loads imposed on the joints have significant promotion effects on the morphology degradation.During cyclic shear tests,joints surfaces evolve from rough state to smooth state but keep an overall undulation.Dilatancy of rock joints degrades with the degradation of joint surface and the increase of normal loads.The closure deformation of joint is larger than that of the intact rock,and the normal stiffness increases with the increase of shearing times.
基金This study is supported by the key projects of the Yalong River Joint Fund of the National Natural Science Foundation of China(Grant No.U1865203)the National Key Research and Development Program of China(Grant Nos.2019YFC0605103,2019YFC0605100)the National Natural Science Foundation of China(Grant No.51279201).The partial support from the Youth Innovation Promotion Association CAS is gratefully acknowledged。
文摘Rock bolts have been widely used for stabilizing rock mass in geotechnical engineering.It is acknowledged that the bolt profiles have a sound influence on the support effect of the rock bolting system.Previous studies have proposed some optimal rib parameters(e.g.rib spacing);unfortunately,the interface shear behaviors are generally ignored.Therefore,determination of radial stress and radial displacement on the bolt-grout interface using traditional pull-out tests is not possible.The load-bearing capacity and deformation capacity vary as bolt profiles differ,suggesting that the support effect of the bolting system can be enhanced by optimizing bolt profiles.The aim of this study is to investigate the effects of bolt profiles(with/without ribs,rib spacing,and rib height)on the shear behaviors between the rock bolt and grout material using direct shear tests.Thereby,systematic interfacial shear tests with different bolt profiles were performed under both constant normal load(CNL)and constant normal stiffness(CNS)boundary conditions.The results suggested that rib spacing has a more marked influence on the interface shear behavior than rib height does,in particular at the post-yield stage.The results could facilitate our understanding of bolt-grout interface shear behavior under CNS conditions,and optimize selection of rock bolts under in situ rock conditions.
基金Projects(51978672,51878671)supported by the National Natural Science Foundation of ChinaProject(2017zzts159)supported by the Graduate Innovation Program of Central South University,China+1 种基金Project(HNTY2021K09)supported by the Open Research Project of the Hunan Tieyuan Civil Engineering Testing Co.Ltd.,China。
文摘A filter cake is often formed between soil and concrete during casting concrete in the ground,such as constructions of diaphragm walls and bored piles.The present study aims to investigate the effect of the filter cake on the shear behavior of the sand-concrete pile interface.A series of sand-concrete interface direct shear tests were performed with a large-direct shear apparatus while considering different roughness(I=0,10,20 and 30 mm)and filter cake thickness(Δh=0,5 and 10 mm).For a smooth interface without a filter cake,the shear stress-horizontal displacement curves showed a“softening”response.The peak shear strength and friction angle decreased exponentially with increasing theΔh.Whereas,for a rough interface withΔh=5 or 10 mm,the shear stress-horizontal displacement curves presented a“hardening”response.The peak strength,as well as friction angle,decreased linearly with increasing theΔh.Moreover,a critical roughness I_(cr)of 10 mm was observed in the tests without a filter cake.The interface shear strength initially increased with increasing I but gradually decreased when the I exceeded I_(cr).In addition,the filter cake could reduce the roughness sensitivity on shear strength.
基金support from the National Natural Science Foundation of China (Grant 11572140)the Fundamental Research Funds for the Central Universities (Grants JUSRP11529, JUSRP115A10, JG2015059)+5 种基金the research and practice project of teaching reform of graduate education in Jiangsu (Grant JGLX16_048)the Undergraduate Innovation Training Program of Jiangnan University of China (Grant 2015151Y)the Undergraduate Innovation and Entrepreneurship Training Program of China (Grant 201610295057)the Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures (NUAA) (Grant MCMS-0416G01)the "Project of Jiangsu provincial Six Talent Peaks" in Jiangsu Province"Thousand Youth Talents Plan"
文摘The loading direction-dependent shear behavior of single-layer chiral graphene sheets at different temperatures is studied by molecular dynamics （MD） simulations. Our results show that the shear properties （such as shear stress-strain curves, buckling strains, and failure strains） of chiral graphene sheets strongly depend on the loading direction due to the structural asymmetry. The maximum values of both the critical buckling shear strain and the failure strain under positive shear deformation can be around 1.4 times higher than those under negative shear deformation. For a given chiral graphene sheet, both its failure strain and failure stress decrease with increasing temperature. In particular, the amplitude to wavelength ratio of wrinkles for different chiral graphene sheets under shear deformation using present MD simulations agrees well with that from the existing theory. These findings provide physical insights into the origins of the loading direction-dependent shear behavior of chiral graphene sheets and their potential applications in nanodevices.
基金Projects(51274249,51174228)supported by the National Natural Science Foundation of China
文摘Direct shear tests were conducted on the rock joints under constant normal load(CNL), while the acoustic emission(AE) signals generated during shear tests were monitored with PAC Micro-II system. Before and after shearing, the surfaces of rock joints were measured by the Talysurf CLI 2000. By correlating the AE events with the shear stress-shear displacement curve, one can observe four periods of the whole course of shearing of rock joints. By the contrast of AE location and actual damage zone, it is elucidated that the AE event is related to the morphology of the joint. With the increase of shearing times, the shear behavior of rock joints gradually presents from the response of brittle behavior to that of ductile behavior. By combining the results of topography measurement, four morphological parameters of joint surface, S p(the maximum height of joint surface), N(number of islands), A(projection area) and V(volume of joint) were introduced, which decrease with shearing. Both the joint roughness coefficient(JRC) and joint matching coefficient(JMC) drop with shearing, and the shear strength of rock joints can be predicted by the JRC-JMC model. It establishes the relationship between micro-topography and macroscopic strength, which have the same change rule with shearing.
文摘The shear punch test(SPT)is a suitable experiment for characterizing the shear behavior of various materials,especially where there are volume limitations.In the present investigation,the relations among various parameters such as clearance,die diameter and sample thickness,and the yield and ultimate shear strengths of AZ80Mg alloy were studied.Moreover,based on the Mohr-Coulomb theory,relatively optimum conditions were introduced for the shear punch test.With this regard,a range of2%-10%is found to be suitable for the clearance/sheet thickness ratio.To provide a simple shear stress state during a shear punch test,it is also necessary to select the die diameter/sheet thickness ratio between2:1and10:1.Based on the predictions of the Mohr-Coulomb theory,it is better to conduct a room-temperature shear punch test with a sample thickness of0.5mm,a clearance of25μm and a die diameter of2mm.Finally,the mean conversion factors to gain the tensile and compressive yield strengths of the cast AZ80from its shear one are found to be1.70and3.09,respectively.
文摘The shear behavior of a single rock joint in limestone specimens,under a constant normal load(CNL),was analyzed in this study.Test specimens with different asperity roughness were prepared and tested.Goodman's model of a rock joint's shear behavior,under CNL,was modified to render a better representation of the data obtained.The model's applicability was validated.The proposed model showed better correlation with experimental data.It also,requires fewer variables.The steps to calculate all the necessary variables for the model are discussed.
基金the State Key Laboratory of Subtropical Building Science at South China University of Technology under Grant No.2011ZA05Québec-China postdoctoral merit scholarship program for foreign students
文摘Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include： 1） under monotonic loading, P_v is the most significant factor; the shear resistance P_（hmax） increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2） for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_（max） varies from 3 mm to 15 mm; 3） under cyclic loading, the interface behavior can be abstracted as a ＂three-segment＂ back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4） by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained.
基金Supported by the National Natural Science Foundation of China(No.51078059)
文摘Prestressed steel ultrahigh-strength reinforced concrete(PSURC) beam is a new type of prestressed concrete beam, which not only has a considerable compressive strength attributed to the ultrahigh strength concrete, but also ensures a certain degree of ductility at failure due to the existence of structural steel. Five of these beams were monotonically tested until shear failure to investigate the static shear performance including the failure pattern, loaddeflection behavior, shear capacity, shear crack width and shear ductility. The experimental results show that these beams have superior shear capacity, crack control ability and shear ductility. To study the shear performance under repeated overloading, seven PSURC beams were loaded in cyclic test simultaneously. The overall shear performance of cycled beams is similar to that of uncycled beams at low load level but different at high load level. The shear capacity and crack control ability of cycled beams at high load level are reduced, whereas the shear ductility is improved. In addition, the influences of variables including the degree of prestress, stirrup ratio and load level on the shear performance of both uncycled and cycled beams were also discussed and compared, respectively.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51478120)。
文摘Steel and ultra⁃high performance concrete(UHPC)composite decks are effective at reducing fatigue cracking and asphalt pavement damage.The shear behavior of innovative open steel tube(OST)connectors in steel⁃UHPC composite decks was investigated by conducting push⁃out tests.The test parameter is the presence of reinforcement in the deck.The load⁃slip curves and shear behavior of the push⁃out specimens were obtained and discussed.The test results indicate that as compared with plain concrete specimens,the limit slip of reinforced specimens decreased by 32%and the shear stiffness increased by 10%,but the ultimate shear capacity was almost the same.The use of UHPC influenced the failure process as it was observed that the OST connector was sheared off at its lower semi⁃tube,followed by the pull⁃out failure of the upper semi⁃tube.A finite element model was verified by tests and was then used to analyze the deformation and failure behaviors of the composite deck with open tubes.The model demonstrates that there is a stress concentration zone at the connector root,and the lower semi⁃tube is the main component that is subject to loads.
文摘To study the shear behavior of the ultrafine magnetite tailings subjected to freeze-thaw cycles,unconsolidated-undrained shear tests were conducted on ultrafine-grained tailings that were subjected to 1-11 cycles of freeze-thaw and defined as a type of clayey silt under confining pressures of 100,200,and 300 kPa.Taking the number of freeze-thaw cycles,cooling temperature,initial dry density,and moisture content as the four main influencing factors of shear behavior of the tailings samples,the shear stress-strain curve,compression modulus,failure strength,cohesion,and internal friction angle were measured.The results show that the freeze-thaw cycle has an obvious weakening effect on the shear behavior of the tailings material,and the shear mechanical parameters are affected by a combination of confining pressure,freeze-thaw cycle condition,and initial physical-mechanical properties of the tailings samples.Through the microstructural analysis of the tailings samples subjected to freeze-thaw cycles,it shows that the freeze-thaw cycle mainly affects the porosity,bound water,and arrangement of the tailings particles.Subsequently,the macroscopic changes in shear strength indexes emerge,and then the stability of the tailings dam will decrease.
基金the financial support from the Key Research Program of Frontier Sciences, Chinese Academy of Sciences (CAS) (grant no. QYZDB-SSW-DQC010)the Youth Innovation Promotion Association, Chinese Academy of Sciences (CAS)
文摘Glacial tills are widely distributed in Tibet, China, and are highly susceptible to landslides under intense rainfalls. Failures of the slope during rainfall are closely related to the shear behavior of glacial tills at different moisture conditions. This study investigates the shear behavior and critical state of saturated and unsaturated glacial tills through a series of drained direct shear tests. The tests were conducted on two types of compacted glacial tills with different water contents and total normal stresses. A strain softening mode of failure is observed for all water content conditions accompanied by noticeable dilation. Dilatancy is found to decrease with increasing water content. Unsaturated samples showed increased rates of dilation as water content is decreased for all applied normal stresses a behavior which cannot be predicted well by classical stressdilatancy models. Furthermore, it was found that the Critical State Line(CSL), plotted on the(e-ln) plane, can be used to define the shear behavior of unsaturated glacial tills at different water contents.The CSL of saturated glacial tills run parallel to this line. The experimental results in this study are aimed to provide a basic understanding to the underlying failure mechanisms of glacial tills.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51138002)a Foundation for the Author of National Excellent Doctoral Dissertation of PR China(Grant No.201452)
文摘In order to study the calculation methods of shear behavior of reinforced concrete beams of Chinese modern reinforced concrete buildings,this paper carried out tests on the concrete compressive strength of 12 Chinese modern concrete buildings,the mechanical properties of 66 rebars from different Chinese modern concrete buildings,and the concrete cover thickness of 9 Chinese modern concrete buildings,and the actual material properties and structural configurations have been obtained. Then,the comparison on calculation methods include the Chinese original calculation method,the Chinese present calculation method,the American present calculation method and the European present calculation method is studied with case analysis method.The results show that the Chinese original calculation method of shear behavior of reinforced concrete beams is based on the allowable stress calculation method,and the design safety factors are 3. 55- 4. 00. The standard value of the compressive strength of concrete cubes is 8. 48 MPa,the standard value of the concrete tensile strength is 1.20 MPa,the standard value of the yield strength of rectangular rebars is 229. 56 MPa,and the standard value of the yield strength of round rebars is 276. 82 MPa. The average value of the concrete cover thickness of beams and columns is 35.96 mm. In term of calculation area of hoop rebars of reinforced concrete beams,without considering earthquake loads,the Chinese original structural calculation method is safer than the Chinese present structural calculation method,but is more unsafe than the American present structural calculation method and the European present structural calculation method. The results can provide the support for structural safety assessments and repair designs of Chinese modern reinforced concrete buildings.
基金the National Natural Science Foundation of China(Grant No.52127815)the Hubei Provincial Natural Science Foundation of China(Grant No.2023AFA078).
文摘Shallow gas can cause many disasters,and it is reported in many marine engineering constructions.For this,it is imperative to understand the impact of gas on the mechanical behaviors of soil.This study investigated the influence of undrained triaxial compression tests on dense gassy sand commonly encountered in coastal areas.Triaxial tests were performed on specimens with saturations of 100%,99.8%,95.9%,and 92.7% under confining pressures of 50 kPa and 200 kPa by a self-developed multipurpose integrated triaxial apparatus(MITA)for gassy soil.The results are presented in terms of monotonic stress‒strain behavior,volumetric behavior,shear strength,and excess pore water pressure(EPWP).The occurrence of gas bubbles has different effects on loose and dense sands,augmenting the undrained shear strength of loose sand while concurrently diminishing that of dense sand.The deviatoric stress of dense sand increases during shear shrinkage,which is similar to the characteristics of loose sand under the influence of gas bubbles.However,following sand dilation,the effect of gas bubbles on deviatoric stress manifests in an antithetical manner.With elevated gas content,the shear strength of dense sand decreases,accompanied by a deceleration in the development of EPWP and a notable increase in volumetric changes.To this end,a microscopic explanation concerning the deformation and evolution of gas bubbles within sand during the shear process was presented to reveal the macroscopic laws governing the undrained shear attributes of dense gassy sand.
文摘Bimrocks are characterized by their geotechnically significant blocky structure,presenting complex shear behavior.This study investigates the shear behavior and dilatancy of bimrocks featuring a rock-like matrix,such as conglomerates.The study addresses a gap in current research,which has predominantly examined the shear behavior of soil-matrix bimrocks(bimsoils).Laboratory direct shear tests were performed on idealized models with varying volumetric block proportions(VBPs).The results highlight that blocks exert both positive and negative effects on shear strength,dilation,and block breakage factor(BF),depending on VBP.Results indicate 40%and 60%as critical VBPs,revealing distinct shear strength trends within this range,contrary to the dominant downward trend.Blocks positively impact dilation and BF between 20%and 50%VBP,while negatively affecting them beyond this range.Blocky skeleton inherently promotes stable dilatancy under normal stress increments and intensifies stress dependency of shear strength.Variations in dilation angle concerning normal stress and VBP suggest the potential for characterizing this factor using equivalent strength and roughness,akin to rockfill materials.Indirect assessments of equivalent strength revealed positive effects of blocks when VBP was between 30%and 70%.Lastly,the findings indicate that blocks notably impact pre-and post-peak behaviors by reducing shear stiffness and inducing local hardening phases.This study also discusses the similarities and distinctions in the function of blocks within soil-like and rock-like matrices.It offers new insights into the exact role of blocks in bimrock shear behavior beyond the traditional interpretation through the variation of friction and cohesion.
