A new method of numerical seismic stability safety evaluation for a rock slope is proposed based on the analysis of a gravity dam foundation subjected to earthquake loading. The shear strengths of the weak discontinui...A new method of numerical seismic stability safety evaluation for a rock slope is proposed based on the analysis of a gravity dam foundation subjected to earthquake loading. The shear strengths of the weak discontinuities are divided by different shear strength reduction ratios （K） and numerical seismic analysis is carried out after the static analysis is completed. With different K values, the curves of the permanent horizontal displacement of key points of the dam foundation （K-displacement curves） are studied. According to the curve change, the distribution of plastic zones in the foundation, and the slow convergence of the finite element method （FEM）, the seismic stability safety factor is defined as Kwhen the gravity dam is in the limit equilibrium state subjected to earthquake loading. These concepts were applied to the evaluation of seismic stability safety of a gravity dam for a hydropower project. The analysis of the example shows that the proposed method is feasible and is an effective method of seismic stability safety evaluation.展开更多
Based on the strength reduction method and strain-softening model,a method for progressive failure analysis of strain-softening slopes was presented in this paper.The mutation is more pronounced in strain-softening an...Based on the strength reduction method and strain-softening model,a method for progressive failure analysis of strain-softening slopes was presented in this paper.The mutation is more pronounced in strain-softening analysis,and the mutation of displacement at slope crest was taken as critical failure criterion.An engineering example was provided to demonstrate the validity of the present method.This method was applied to a cut slope in an industry site.The results are as follows:(1) The factor of safety and the critical slip surface obtained by the present method are between those by peak and residual strength.The analysis with peak strength would lead to non-conservative results,but that with residual strength tends to be overly conservative.(2) The thickness of the shear zone considering strain-softening behaviour is narrower than that with non-softening analysis.(3) The failure of slope is the process of the initiation,propagation and connection of potential failure surface.The strength parameters are mobilized to a non-uniform degree while progressive failure occurs in the slope.(4) The factor of safety increases with the increase of residual shear strain threshold and elastic modulus.The failure mode of slope changes from shallow slip to deep slip.Poisson's ratio and dilation angle have little effect on the results.展开更多
The effect of slope angle for external overburden dump in response to average and heavy rainfall has been analyzed using a two dimensional finite difference method of transient water flow through unsaturated–saturate...The effect of slope angle for external overburden dump in response to average and heavy rainfall has been analyzed using a two dimensional finite difference method of transient water flow through unsaturated–saturated soil. The external dump stability is evaluated for five geomaterial types on the basis of globally accepted safety factor analysis technique, based on shear strength reduction approach using finite difference method. The results obtained from the finite difference method of analysis indicate that the external dump with more than 30° slope angle is greatly influenced by the rainfall under the studied conditions for geomaterial 3, 4 and 5, whereas dumps with geomaterial 1 and 2 remain safe. The analysis shows that major slope failure is out of preview for the studied rainfall conditions.展开更多
Stability analysis of strain-softening slopes is carried out using the shear strength reduction method and Mohr-Coulomb model with degrading cohesion and friction angle.The e ffect of strain-softening behavior on the ...Stability analysis of strain-softening slopes is carried out using the shear strength reduction method and Mohr-Coulomb model with degrading cohesion and friction angle.The e ffect of strain-softening behavior on the slope factor of safety is investigated by performing a series of analyses for various slope geometries and strength properties.Stability charts and equations are developed to estimate the factor of safety of strain-softe ning slopes from the results of traditional stability analysis based on perfectly-plastic behavior.Two example applications including an open pit mine in weak rock and clay shale slope with daylighting bedding planes are presented.The results of limit equilibrium analysis and shear strength reduction method with perfectly-plastic models were in close agreement.Using perfectly-plastic models with peak strength properties led to overly optimistic results while adopting residual strength properties gave excessively conservative outcomes.The shear strength reduction method with a strain-softening model gave realistic factors of safety while accounting for the process of strength degradation.展开更多
In order to study the mechanism of water inrush from a concealed, confined karst cave, we established a fluid–solid coupling model of water inrush from a concealed karst cave ahead of a roadway and a strength reducti...In order to study the mechanism of water inrush from a concealed, confined karst cave, we established a fluid–solid coupling model of water inrush from a concealed karst cave ahead of a roadway and a strength reduction method in a rock pillar for preventing water inrush based on catastrophic theory. Fluid–solid coupling effects and safety margins in a rock pillar were studied. Analysis shows that rock pillar instability, exerted by disturbance stress and seepage stress, is the process of rock pillar catastrophic destabilization induced by nonlinear extension of plastic zones in the rock pillar. Seepage flow emerges in the rock pillar for preventing water inrush, accompanied by mechanical instability of the rock pillar. Taking the accident of a confined karst cave water-inrush of Qiyi Mine as an example, by studying the safety factor of the rock pillar and the relationship between karst cave water pressure and thickness of the rock pillar,it is proposed that rock pillar thickness with a safety factor equal to 1.5 is regarded as the calculated safety thickness of the rock pillar, which should be equal to the sum of the blasthole depth, blasting disturbance depth and the calculated safety thickness of the rock pillar. The cause of the karst water inrush at Qiyi Mine is that the rock pillar was so small that it did not possess a safety margin. Combining fluid–solid coupling theory, catastrophic theory and strength reduction method to study the nonlinear mechanical response of complicated rock engineering, new avenues for quantitative analysis of rock engineering stability evaluation should be forthcoming.展开更多
The effects of stabilizing piles on the stability of an embankment slope are analyzed by numerical simulation. The shear strength reduction method is used for the analysis, and the soil - pile interaction is simulated...The effects of stabilizing piles on the stability of an embankment slope are analyzed by numerical simulation. The shear strength reduction method is used for the analysis, and the soil - pile interaction is simulated with zero-thickness elasto-plastic interface elements. Effects of pile spacing and pile position on the safety factor of slope and the behavior of piles under these conditions are given. The numerical analysis indicates that the positions of the pile have significant influence on the stability of the slope, and the pile needs to be installed in the middle of the slope for maximum safety factors. In the end, the soil arching effect closely associated with the space between stabilizing piles is analyzed. The results are helpful for design and construction of stabilizing piles.展开更多
Considering the stochastic spatial variation of geotechnical parameters over the slope, a Stochastic Finite Element Method (SFEM) is established based on the combination of the Shear Strength Reduction (SSR) concept a...Considering the stochastic spatial variation of geotechnical parameters over the slope, a Stochastic Finite Element Method (SFEM) is established based on the combination of the Shear Strength Reduction (SSR) concept and quasi-Monte Carlo simulation. The shear strength reduction FEM is superior to the slice method based on the limit equilibrium theory in many ways, so it will be more powerful to assess the reliability of global slope stability when combined with probability theory. To illustrate the performance of the proposed method, it is applied to an example of simple slope. The results of simulation show that the proposed method is effective to perform the reliability analysis of global slope stability without presupposing a potential slip surface.展开更多
The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inho...The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inhomogeneous materials,complex morphology,and erratic joints.Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety(FoS)and Critical Slip Surface(CSS).In this article,the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor(SRF)method.An inclined Tension Crack(TC)influences the magnitude and location of the rock slope’s Critical Shear Strength Reduction Factor(CSRF).Certainly,inclined cracks are more prone to cause the failure of the slope than the vertical TC.Yet,all tension cracks do not lead to failure of the slope mass.The effect of the crest distance of the tension crack is also investigated.The numerical results do not show any significant change in the magnitude of CSRF unless the tip of the TC is very near to the crest of the slope.ATC is also replaced with a joint,and the results differ from the corresponding TC.These results are discussed regarding shear stress and Critical Slip Surface(CSS).展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 90510017)
文摘A new method of numerical seismic stability safety evaluation for a rock slope is proposed based on the analysis of a gravity dam foundation subjected to earthquake loading. The shear strengths of the weak discontinuities are divided by different shear strength reduction ratios （K） and numerical seismic analysis is carried out after the static analysis is completed. With different K values, the curves of the permanent horizontal displacement of key points of the dam foundation （K-displacement curves） are studied. According to the curve change, the distribution of plastic zones in the foundation, and the slow convergence of the finite element method （FEM）, the seismic stability safety factor is defined as Kwhen the gravity dam is in the limit equilibrium state subjected to earthquake loading. These concepts were applied to the evaluation of seismic stability safety of a gravity dam for a hydropower project. The analysis of the example shows that the proposed method is feasible and is an effective method of seismic stability safety evaluation.
基金Project supported by the National Natural Science Foundation of China (No. 10972238)the Scholarship Award for Excellent Doctoral Student Granted by Ministry of Educationthe Transportation Science and Technology Projects of Hunan Province (No. 201003),China
文摘Based on the strength reduction method and strain-softening model,a method for progressive failure analysis of strain-softening slopes was presented in this paper.The mutation is more pronounced in strain-softening analysis,and the mutation of displacement at slope crest was taken as critical failure criterion.An engineering example was provided to demonstrate the validity of the present method.This method was applied to a cut slope in an industry site.The results are as follows:(1) The factor of safety and the critical slip surface obtained by the present method are between those by peak and residual strength.The analysis with peak strength would lead to non-conservative results,but that with residual strength tends to be overly conservative.(2) The thickness of the shear zone considering strain-softening behaviour is narrower than that with non-softening analysis.(3) The failure of slope is the process of the initiation,propagation and connection of potential failure surface.The strength parameters are mobilized to a non-uniform degree while progressive failure occurs in the slope.(4) The factor of safety increases with the increase of residual shear strain threshold and elastic modulus.The failure mode of slope changes from shallow slip to deep slip.Poisson's ratio and dilation angle have little effect on the results.
基金SERBDSTGovernment of India for funding this research work
文摘The effect of slope angle for external overburden dump in response to average and heavy rainfall has been analyzed using a two dimensional finite difference method of transient water flow through unsaturated–saturated soil. The external dump stability is evaluated for five geomaterial types on the basis of globally accepted safety factor analysis technique, based on shear strength reduction approach using finite difference method. The results obtained from the finite difference method of analysis indicate that the external dump with more than 30° slope angle is greatly influenced by the rainfall under the studied conditions for geomaterial 3, 4 and 5, whereas dumps with geomaterial 1 and 2 remain safe. The analysis shows that major slope failure is out of preview for the studied rainfall conditions.
基金financially supported by the Natural Sciences and Engineering Research Council of Canada(NSERC:RES0014117).
文摘Stability analysis of strain-softening slopes is carried out using the shear strength reduction method and Mohr-Coulomb model with degrading cohesion and friction angle.The e ffect of strain-softening behavior on the slope factor of safety is investigated by performing a series of analyses for various slope geometries and strength properties.Stability charts and equations are developed to estimate the factor of safety of strain-softe ning slopes from the results of traditional stability analysis based on perfectly-plastic behavior.Two example applications including an open pit mine in weak rock and clay shale slope with daylighting bedding planes are presented.The results of limit equilibrium analysis and shear strength reduction method with perfectly-plastic models were in close agreement.Using perfectly-plastic models with peak strength properties led to overly optimistic results while adopting residual strength properties gave excessively conservative outcomes.The shear strength reduction method with a strain-softening model gave realistic factors of safety while accounting for the process of strength degradation.
基金Financial supports for this work, provided by the National Natural Science Foundation of China (No. 51274097)the Scientific Research Fund of Hunan Provincial Education Department of China (No. 13A020)the Open Projects of State Key Laboratory of Coal Resources and Safe Mining, CUMT (No. 13KF03)
文摘In order to study the mechanism of water inrush from a concealed, confined karst cave, we established a fluid–solid coupling model of water inrush from a concealed karst cave ahead of a roadway and a strength reduction method in a rock pillar for preventing water inrush based on catastrophic theory. Fluid–solid coupling effects and safety margins in a rock pillar were studied. Analysis shows that rock pillar instability, exerted by disturbance stress and seepage stress, is the process of rock pillar catastrophic destabilization induced by nonlinear extension of plastic zones in the rock pillar. Seepage flow emerges in the rock pillar for preventing water inrush, accompanied by mechanical instability of the rock pillar. Taking the accident of a confined karst cave water-inrush of Qiyi Mine as an example, by studying the safety factor of the rock pillar and the relationship between karst cave water pressure and thickness of the rock pillar,it is proposed that rock pillar thickness with a safety factor equal to 1.5 is regarded as the calculated safety thickness of the rock pillar, which should be equal to the sum of the blasthole depth, blasting disturbance depth and the calculated safety thickness of the rock pillar. The cause of the karst water inrush at Qiyi Mine is that the rock pillar was so small that it did not possess a safety margin. Combining fluid–solid coupling theory, catastrophic theory and strength reduction method to study the nonlinear mechanical response of complicated rock engineering, new avenues for quantitative analysis of rock engineering stability evaluation should be forthcoming.
基金Supported by Young Teacher Foundation of Tianjin University(No.5110104)
文摘The effects of stabilizing piles on the stability of an embankment slope are analyzed by numerical simulation. The shear strength reduction method is used for the analysis, and the soil - pile interaction is simulated with zero-thickness elasto-plastic interface elements. Effects of pile spacing and pile position on the safety factor of slope and the behavior of piles under these conditions are given. The numerical analysis indicates that the positions of the pile have significant influence on the stability of the slope, and the pile needs to be installed in the middle of the slope for maximum safety factors. In the end, the soil arching effect closely associated with the space between stabilizing piles is analyzed. The results are helpful for design and construction of stabilizing piles.
文摘Considering the stochastic spatial variation of geotechnical parameters over the slope, a Stochastic Finite Element Method (SFEM) is established based on the combination of the Shear Strength Reduction (SSR) concept and quasi-Monte Carlo simulation. The shear strength reduction FEM is superior to the slice method based on the limit equilibrium theory in many ways, so it will be more powerful to assess the reliability of global slope stability when combined with probability theory. To illustrate the performance of the proposed method, it is applied to an example of simple slope. The results of simulation show that the proposed method is effective to perform the reliability analysis of global slope stability without presupposing a potential slip surface.
文摘The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inhomogeneous materials,complex morphology,and erratic joints.Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety(FoS)and Critical Slip Surface(CSS).In this article,the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor(SRF)method.An inclined Tension Crack(TC)influences the magnitude and location of the rock slope’s Critical Shear Strength Reduction Factor(CSRF).Certainly,inclined cracks are more prone to cause the failure of the slope than the vertical TC.Yet,all tension cracks do not lead to failure of the slope mass.The effect of the crest distance of the tension crack is also investigated.The numerical results do not show any significant change in the magnitude of CSRF unless the tip of the TC is very near to the crest of the slope.ATC is also replaced with a joint,and the results differ from the corresponding TC.These results are discussed regarding shear stress and Critical Slip Surface(CSS).
