Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequent...Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequential Convex Programming(SFC-SCP)to improve the computation efficiency and reliability of trajectory generation.SFC-SCP combines the front-end convex polyhedron SFC construction and back-end SCP-based trajectory optimization.A Sparse A^(*)Search(SAS)driven SFC construction method is designed to efficiently generate polyhedron SFC according to the geometric relation among obstacles and collision-free waypoints.Via transforming the nonconvex obstacle-avoidance constraints to linear inequality constraints,SFC can mitigate infeasibility of trajectory planning and reduce computation complexity.Then,SCP casts the nonlinear trajectory optimization subject to SFC into convex programming subproblems to decrease the problem complexity.In addition,a convex optimizer based on interior point method is customized,where the search direction is calculated via successive elimination to further improve efficiency.Simulation experiments on dense obstacle scenarios show that SFC-SCP can generate dynamically feasible safe trajectory rapidly.Comparative studies with state-of-the-art SCP-based methods demonstrate the efficiency and reliability merits of SFC-SCP.Besides,the customized convex optimizer outperforms off-the-shelf optimizers in terms of computation time.展开更多
A gradient coating containing collagen and inorganic strontium/calcium phosphate(Sr/CaP)was fabricated on plasma-electrolytically oxidised magnesium via one-step cathodic electrodeposition.First,Sr-doped dicalcium pho...A gradient coating containing collagen and inorganic strontium/calcium phosphate(Sr/CaP)was fabricated on plasma-electrolytically oxidised magnesium via one-step cathodic electrodeposition.First,Sr-doped dicalcium phosphate dihydrate and hydroxyapatite(DCPD and HA)was deposited,followed by a collagen/CaP layer.The morphological evolution,sequential degradation behaviour,and in vitro bio-properties of the coatings were investigated.The incorporation of collagen remarkably refined the morphology of the CaP,and a more aggregated nano-spherical morphology was observed with increasing collagen concentration.Sr could partially replace Ca in the CaP crystals.Collagen combined with CaP formed a relatively stable skeletal frame,which provided sufficient barrier properties and more sites for the re-precipitation of bone tissue,as well as a more promising proliferation and differentiation ability of osteoblasts.A gradient coating that matches the requirements of bone growth at various periods is suggested for implantation.展开更多
Achieving artificial simulations of multi-step energy transfer processes and conversions in nature remains a challenge.In this study,we present a three-step sequential energy transfer process,which was constructed thr...Achieving artificial simulations of multi-step energy transfer processes and conversions in nature remains a challenge.In this study,we present a three-step sequential energy transfer process,which was constructed through host-vip interactions between a piperazine derivative(PPE-BPI)with aggregationinduced emission(AIE)and cucurbit[7]uril(CB[7])in water to serve as ideal energy donors.To achieve multi-step sequential energy transfer,we employ three distinct fluorescent dyes Eosin B(EsB),Sulforhodamine 101(SR101),and Cyanine 5(Cy5)as energy acceptors.The PPE-PBI-2CB[7]+EsB+SR101+Cy5 system demonstrates a highly efficient three-step sequential energy transfer mechanism,starting with PPEPBI-2CB[7]and transferring energy successively to EsB,SR101,and finally to Cy5,with remarkable energy transfer efficiencies.More interestingly,with the progressive transfer of energy in the multi-step energy transfer system,the generation efficiency of superoxide anion radical(O_(2)•-)increased gradually,which can be used as photocatalysts for selectively photooxidation of N-phenyltetrahydroisoquinoline in an aqueous medium with a high yield of 86%after irradiation for 18 h.This study offers a valuable investigation into the simulation of multi-step energy transfer processes and transformations in the natural world,paving the way for further research in the field.展开更多
Background:Recent scholarly attention has increasingly focused on filial piety beliefs'impact on youth's psychological development.However,the mechanisms by which filial piety indirectly influences adolescent ...Background:Recent scholarly attention has increasingly focused on filial piety beliefs'impact on youth's psychological development.However,the mechanisms by which filial piety indirectly influences adolescent autonomy through depression and well-being remain underexplored.This study aimed to test a sequential mediation model among filial piety beliefs,depression,well-being,and autonomy in Taiwan region of China university students.Methods:A total of 566 Taiwan region of China undergraduate and graduate students,comprising 390 females and 176 males,and including 399 undergraduates and 167 graduate students,were recruited through convenience sampling.Data were collected via an online questionnaire.Validated instruments were employed,including the Filial Piety Scale(FPS),the Center for Epidemiological Studies Depression Scale(CES-D),the Chinese Well-being Inventory(CHI),and the Adolescent Autonomy Scale-Short Form(AAS-SF).Statistical analyses included group comparisons,correlation analyses,and structural equation modeling to examine the hypothesized relationships and mediation effects.Results:The results revealed that filial piety beliefs exerted a significant positive impact on adolescent autonomy,with depression and well-being serving as key mediators in this relationship.A sequential mediation effect was confirmed through structural equation modeling(β=0.052,95%CI[0.028,0.091]),with good model fit indices(x^(2)/df=4.25,RMSEA=0.076,CFI=0.968),supporting the hypothesized pathway from filial piety to autonomy via depression and well-being.In terms of demographic differences,male students showed significantly higher autonomy than females(p<0.001);students from single-parent families reported significantly higher depression levels than those from two-parent families(p<0.05);and graduate students exhibited significantly higher autonomy and well-being than undergraduates(p<0.05).Conclusions:These findings underscore not only the importance of filial piety beliefs for developing youth autonomy but also the critical role that mental health factors,such as depression and well-being,play in this process.The study concludes with a discussion of both theoretical implications and practical recommendations.These include strategies to foster reciprocal filial piety,strengthen parent-child relationships,and promote mental health.Additionally,the study outlines its limitations and proposes directions for future research.展开更多
Sequential processing(SqP)of the active layer offers independent optimization of the donor and acceptor with more targeted solvent design,which is considered the most promising strategy for achieving efficient organic...Sequential processing(SqP)of the active layer offers independent optimization of the donor and acceptor with more targeted solvent design,which is considered the most promising strategy for achieving efficient organic solar cells(OSCs).In the SqP method,the favorable interpenetrating network seriously depends on the fine control of the bottom layer swelling.However,the choice of solvent(s)for both the donor and acceptor have been mostly based on a trial-and-error manner.A single solvent often cannot achieve sufficient yet not excessive swelling,which has long been a difficulty in the high efficient SqP OSCs.Herein,two new isomeric molecules are introduced to fine-tune the nucleation and crystallization dynamics that allows judicious control over the swelling of the bottom layer.The strong non-covalent interaction between the isomeric molecule and active materials provides an excellent driving force for optimize the swelling-process.Among them,the molecule with high dipole moment promotes earlier nucleation of the PM6 and provides extended time for crystallization during SqP,improving bulk morphology and vertical phase segregation.As a result,champion efficiencies of 17.38%and 20.00%(certified 19.70%)are achieved based on PM6/PYF-T-o(all-polymer)and PM6/BTP-eC9 devices casted by toluene solvent.展开更多
Objective:A risk-based sequential screening strategy,from questionnaire-based assessment to biomarker measurement and then to endoscopic examination,has the potential to enhance gastric cancer(GC)screening efficiency....Objective:A risk-based sequential screening strategy,from questionnaire-based assessment to biomarker measurement and then to endoscopic examination,has the potential to enhance gastric cancer(GC)screening efficiency.We aimed to evaluate the ability of five common stomach-specific serum biomarkers to further enrich high-risk individuals for GC in the questionnaire-identified high-risk population.Methods:This study was conducted based on a risk-based screening program in Ningxia Hui Autonomous Region,China.We first performed questionnaire assessment involving 23,381 individuals(7,042 outpatients and 16,339 individuals from the community),and those assessed as“high-risk”were then invited to participate in serological assays and endoscopic examinations.The serological biomarker model was derived based on logistic regression,with predictors selected via the Akaike information criterion.Model performance was evaluated by the area under the receiver operating characteristic curve(AUC).Results:A total of 2,011 participants were ultimately included for analysis.The final serological biomarker model had three predictors,comprising pepsinogenⅠ(PGI),pepsinogenⅠ/Ⅱratio(PGR),and anti-Helicobacter pylori immunoglobulin G(anti-H.pylori IgG)antibodies.This model generated an AUC of 0.733(95%confidence interval:0.655-0.812)and demonstrated the best discriminative ability compared with previously developed serological biomarker models.As the risk cut-off value of our model rose,the detection rate increased and the number of endoscopies needed to detect one case decreased.Conclusions:PGI,PGR,and anti-H.pylori Ig G could be jointly used to further enrich high-risk individuals for GC among those selected by questionnaire assessment,providing insight for the development of a multi-stage riskbased sequential strategy for GC screening.展开更多
Polycyclic compounds are widely found in natural products and drug molecules with important biological activities,which attracted the attention of many chemists.Phosphine-catalyzed nucleophilic addition is one of the ...Polycyclic compounds are widely found in natural products and drug molecules with important biological activities,which attracted the attention of many chemists.Phosphine-catalyzed nucleophilic addition is one of the most powerful tools for the construction of various cyclic compounds with the advantages of atom economy,mild reaction conditions and simplicity of operation.Allenolates,Morita−Baylis−Hillman(MBH)alcohols and their derivatives(MBHADs),electron-deficient olefins and alkynes are very efficient substrates in phosphine mediated annulations,which formed many phosphonium species such asβ-phosphonium enolates,β-phosphonium dienolates and vinyl phosphonium ylides as intermediates.This review describes the reactivities of these phosphonium zwitterions and summarizes the synthesis of polycycle compounds through phosphine-mediated intramolecular and intermolecular sequential annulations.Thus,a systematic summary of the research process based on the phosphine-mediated sequential annulations of allenolates,MBH alcohols and MBHADs,electron-deficient olefins and alkynes are presented in Chapters 2-6,respectively.展开更多
Nuclear mass is an important property in both nuclear and astrophysics.In this study,we explore an improved mass model that incorporates a higher-order term of symmetry energy using algorithms.The sequential least squ...Nuclear mass is an important property in both nuclear and astrophysics.In this study,we explore an improved mass model that incorporates a higher-order term of symmetry energy using algorithms.The sequential least squares programming(SLSQP)algorithm augments the precision of this multinomial mass model by reducing the error from 1.863 MeV to 1.631 MeV.These algorithms were further examined using 200 sample mass formulae derived from theδE term of the E_(isospin) mass model.The SLSQP method exhibited superior performance compared to the other algorithms in terms of errors and convergence speed.This algorithm is advantageous for handling large-scale multiparameter optimization tasks in nuclear physics.展开更多
Morphological control is recognized as a pivotal factor in developing high-performing solution-processed organic photovoltaics(OPVs).The essence of achieving optimal morphology in a sequentially deposited active layer...Morphological control is recognized as a pivotal factor in developing high-performing solution-processed organic photovoltaics(OPVs).The essence of achieving optimal morphology in a sequentially deposited active layer lies in the precise modulation of the micro-morphology of the donor phase,encompassing molecular arrangement,orientation,and crystalline structure.The micro-morphology of the polymer donor layer plays a significant role in determining the vertical composition distribution and the adequacy of the donor/acceptor(D/A)interfaces.In this work,self-solvent vapor annealing(S-SVA)is employed to meticulously engineer the π-πstacking and crystalline domains of polymer donor PM6.This is accomplished by precisely adjusting the evaporation kinetics of the self-solvent and leveraging the swelling effect induced by residual self-solvents,thereby enhancing the self-assembly of PM6 molecules.The resultant improvements inπ-πstacking and coherence length have led to efficient charge transport.These refinements have translated into a power conversion efficiency of 18.2%,accompanied by an open-circuit voltage of 0.886 V,a short-circuit current density of 25.9 mA cm^(-2),and a fill factor of 79.4%.The straightforward yet impactful method not only enhances film crystallinity and device performance but also holds broad application potential.展开更多
The single-point bending method,based on atomic force microscopy(AFM),has been extensively validated for characterizing the structural mechanical properties of micro-and nanobeams.Nevertheless,the influence of AFM pro...The single-point bending method,based on atomic force microscopy(AFM),has been extensively validated for characterizing the structural mechanical properties of micro-and nanobeams.Nevertheless,the influence of AFM probe loading and positioning has yet to be subjected to comprehensive investigation.This paper proposes a novel bending-test method based on sequential loading points,in which a series of evenly distributed loads are applied along the length of the central axis on the upper surface of the cantilever.The preliminary measured values of Young’s modulus for an unknown alloy material were 193,178,and 176 GPa,exhibiting a considerable degree of dispersion.An algorithm for self-correction of the positioning error was developed,and this resulted in a positioning error of 53 nm and a final converged Young’s modulus of 161 GPa.展开更多
Background:Hepatocellular carcinoma (HCC) is a leading cause of cancer-related mortality. While liver transplantation (LT) provides the best long-term survival, it is constrained by organ scarcity and strict criteria....Background:Hepatocellular carcinoma (HCC) is a leading cause of cancer-related mortality. While liver transplantation (LT) provides the best long-term survival, it is constrained by organ scarcity and strict criteria. Liver resection (LR) is often the initial treatment for patients with solitary tumors and preserved liver function. The high recurrence rates associated with LR has prompted the exploration of sequential living donor liver transplantation (seq LDLT) after LR as a strategy for HCC patients with high-risk of recurrence.Methods:We analyzed data from 27 adult patients who underwent seq LDLT after LR for HCC at Kaohsiung Chang Gung Memorial Hospital (KCGMH) between June 1994 and December 2023. Patients were selected based on high-risk histopathological features post-LR or as part of downstaging strategy. Outcomes measured included overall survival (OS) and disease-free survival (DFS).Results:Among 765 HCC patients who underwent LDLT, 204 received LR before LDLT, and 27 underwent seqL DLT. Five patients (19%) underwent living donor liver transplantation (LDLT) following LR as a downstaging strategy while the rest received seqL DLT as a preemptive strategy. The median age was 53.5 years with 85%males. Chronic hepatitis B was the predominant underlying disease (74%). The 1-, 3-, and 5-year OS and DFS rates were 100%, 96.0%, 96.0%and 100%, 96.2%, 96.2%, respectively, with two patients experiencing HCC recurrence. One patient died from HCC recurrence. High-risk histopathological features included microvascular invasion (52%), satellite nodules (15%), multiple tumors (26%), tumors> 5 cm(19%), and a total tumor diameter> 10 cm (7%).Conclusions:Seq LDLT offers a promising, tailored approach for managing HCC with adverse histopathologic features. Combining seq LDLT, downstaging strategies, and multidisciplinary treatments can achieve satisfactory OS and DFS in carefully selected patients, highlighting the need for refined criteria to identify the best candidates.展开更多
Recently,many Sequential Recommendation methods adopt self-attention mechanisms to model user preferences.However,these methods tend to focus more on low-frequency information while neglecting highfrequency informatio...Recently,many Sequential Recommendation methods adopt self-attention mechanisms to model user preferences.However,these methods tend to focus more on low-frequency information while neglecting highfrequency information,which makes them ineffective in balancing users’long-and short-term preferences.At the same time,manymethods overlook the potential of frequency domainmethods,ignoring their efficiency in processing frequency information.To overcome this limitation,we shift the focus to the combination of time and frequency domains and propose a novel Hybrid Time-Frequency Dual-Branch Transformer for Sequential Recommendation,namely HyTiFRec.Specifically,we design two hybrid filter modules:the learnable hybrid filter(LHF)and the window hybrid filter(WHF).We combine these with the Efficient Attention(EA)module to form the dual-branch structure to replace the self-attention components in Transformers.The EAmodule is used to extract sequential and global information.The LHF andWHF modules balance the proportion of different frequency bands,with LHF globally modulating the spectrum in the frequency domain and WHF retaining frequency components within specific local frequency bands.Furthermore,we use a time domain residual information addition operation in the hybrid filter module,which reduces information loss and further facilitates the hybrid of time-frequency methods.Extensive experiments on five widely-used real-world datasets show that our proposed method surpasses state-of-the-art methods.展开更多
Challenges in stratigraphic modeling arise from underground uncertainty.While borehole exploration is reliable,it remains sparse due to economic and site constraints.Electrical resistivity tomography(ERT)as a cost-eff...Challenges in stratigraphic modeling arise from underground uncertainty.While borehole exploration is reliable,it remains sparse due to economic and site constraints.Electrical resistivity tomography(ERT)as a cost-effective geophysical technique can acquire high-density data;however,uncertainty and nonuniqueness inherent in ERT impede its usage for stratigraphy identification.This paper integrates ERT and onsite observations for the first time to propose a novel method for characterizing stratigraphic profiles.The method consists of two steps:(1)ERT for prior knowledge:ERT data are processed by soft clustering using the Gaussian mixture model,followed by probability smoothing to quantify its depthdependent uncertainty;and(2)Observations for calibration:a spatial sequential Bayesian updating(SSBU)algorithm is developed to update the prior knowledge based on likelihoods derived from onsite observations,namely topsoil and boreholes.The effectiveness of the proposed method is validated through its application to a real slope site in Foshan,China.Comparative analysis with advanced borehole-driven methods highlights the superiority of incorporating ERT data in stratigraphic modeling,in terms of prediction accuracy at borehole locations and sensitivity to borehole data.Informed by ERT,reduced sensitivity to boreholes provides a fundamental solution to the longstanding challenge of sparse measurements.The paper further discusses the impact of ERT uncertainty on the proposed model using time-lapse measurements,the impact of model resolution,and applicability in engineering projects.This study,as a breakthrough in stratigraphic modeling,bridges gaps in combining geophysical and geotechnical data to address measurement sparsity and paves the way for more economical geotechnical exploration.展开更多
For uncertainty quantification of complex models with high-dimensional,nonlinear,multi-component coupling like digital twins,traditional statistical sampling methods,such as random sampling and Latin hypercube samplin...For uncertainty quantification of complex models with high-dimensional,nonlinear,multi-component coupling like digital twins,traditional statistical sampling methods,such as random sampling and Latin hypercube sampling,require a large number of samples,which entails huge computational costs.Therefore,how to construct a small-size sample space has been a hot issue of interest for researchers.To this end,this paper proposes a sequential search-based Latin hypercube sampling scheme to generate efficient and accurate samples for uncertainty quantification.First,the sampling range of the samples is formed by carving the polymorphic uncertainty based on theoretical analysis.Then,the optimal Latin hypercube design is selected using the Latin hypercube sampling method combined with the"space filling"criterion.Finally,the sample selection function is established,and the next most informative sample is optimally selected to obtain the sequential test sample.Compared with the classical sampling method,the generated samples can retain more information on the basis of sparsity.A series of numerical experiments are conducted to demonstrate the superiority of the proposed sequential search-based Latin hypercube sampling scheme,which is a way to provide reliable uncertainty quantification results with small sample sizes.展开更多
Named data networking(NDNs)is an idealized deployment of information-centric networking(ICN)that has attracted attention from scientists and scholars worldwide.A distributed in-network caching scheme can efficiently r...Named data networking(NDNs)is an idealized deployment of information-centric networking(ICN)that has attracted attention from scientists and scholars worldwide.A distributed in-network caching scheme can efficiently realize load balancing.However,such a ubiquitous caching approach may cause problems including duplicate caching and low data diversity,thus reducing the caching efficiency of NDN routers.To mitigate these caching problems and improve the NDN caching efficiency,in this paper,a hierarchical-based sequential caching(HSC)scheme is proposed.In this scheme,the NDN routers in the data transmission path are divided into various levels and data with different request frequencies are cached in distinct router levels.The aim is to cache data with high request frequencies in the router that is closest to the content requester to increase the response probability of the nearby data,improve the data caching efficiency of named data networks,shorten the response time,and reduce cache redundancy.Simulation results show that this scheme can effectively improve the cache hit rate(CHR)and reduce the average request delay(ARD)and average route hop(ARH).展开更多
This paper offers an extensive overview of the utilization of sequential approximate optimization approaches in the context of numerically simulated large-scale continuum structures.These structures,commonly encounter...This paper offers an extensive overview of the utilization of sequential approximate optimization approaches in the context of numerically simulated large-scale continuum structures.These structures,commonly encountered in engineering applications,often involve complex objective and constraint functions that cannot be readily expressed as explicit functions of the design variables.As a result,sequential approximation techniques have emerged as the preferred strategy for addressing a wide array of topology optimization challenges.Over the past several decades,topology optimization methods have been advanced remarkably and successfully applied to solve engineering problems incorporating diverse physical backgrounds.In comparison to the large-scale equation solution,sensitivity analysis,graphics post-processing,etc.,the progress of the sequential approximation functions and their corresponding optimizersmake sluggish progress.Researchers,particularly novices,pay special attention to their difficulties with a particular problem.Thus,this paper provides an overview of sequential approximation functions,related literature on topology optimization methods,and their applications.Starting from optimality criteria and sequential linear programming,the other sequential approximate optimizations are introduced by employing Taylor expansion and intervening variables.In addition,recent advancements have led to the emergence of approaches such as Augmented Lagrange,sequential approximate integer,and non-gradient approximation are also introduced.By highlighting real-world applications and case studies,the paper not only demonstrates the practical relevance of these methods but also underscores the need for continued exploration in this area.Furthermore,to provide a comprehensive overview,this paper offers several novel developments that aim to illuminate potential directions for future research.展开更多
The prefrontal cortex and hippocampus may support sequential working memory beyond episodic memory and spatial navigation.This stereoelectroencephalography(SEEG)study investigated how the dorsolateral prefrontal corte...The prefrontal cortex and hippocampus may support sequential working memory beyond episodic memory and spatial navigation.This stereoelectroencephalography(SEEG)study investigated how the dorsolateral prefrontal cortex(DLPFC)interacts with the hippocampus in the online processing of sequential information.Twenty patients with epilepsy(eight women,age 27.6±8.2 years)completed a line ordering task with SEEG recordings over the DLPFC and the hippocampus.Participants showed longer thinking times and more recall errors when asked to arrange random lines clockwise(random trials)than to maintain ordered lines(ordered trials)before recalling the orientation of a particular line.First,the ordering-related increase in thinking time and recall error was associated with a transient theta power increase in the hippocampus and a sustained theta power increase in the DLPFC(3–10 Hz).In particular,the hippocampal theta power increase correlated with the memory precision of line orientation.Second,theta phase coherences between the DLPFC and hippocampus were enhanced for ordering,especially for more precisely memorized lines.Third,the theta band DLPFC→hippocampus influence was selectively enhanced for ordering,especially for more precisely memorized lines.This study suggests that theta oscillations may support DLPFC-hippocampal interactions in the online processing of sequential information.展开更多
Objective: Despite cardiotoxicity overlap, the trastuzumab/pertuzumab and anthracycline combination remains crucial due to significant benefits. Pegylated liposomal doxorubicin(PLD), a less cardiotoxic anthracycline, ...Objective: Despite cardiotoxicity overlap, the trastuzumab/pertuzumab and anthracycline combination remains crucial due to significant benefits. Pegylated liposomal doxorubicin(PLD), a less cardiotoxic anthracycline, was evaluated for efficacy and cardiac safety when combined with cyclophosphamide and followed by taxanes with trastuzumab/pertuzumab in human epidermal growth factor receptor-2(HER2)-positive early breast cancer(BC).Methods: In this multicenter, phase II study, patients with confirmed HER2-positive early BC received four cycles of PLD(30-35 mg/m^(2)) and cyclophosphamide(600 mg/m^(2)), followed by four cycles of taxanes(docetaxel,90-100 mg/m^(2) or nab-paclitaxel, 260 mg/m^(2)), concomitant with eight cycles of trastuzumab(8 mg/kg loading dose,then 6 mg/kg) and pertuzumab(840 mg loading dose, then 420 mg) every 3 weeks. The primary endpoint was total pathological complete response(tp CR, yp T0/is yp N0). Secondary endpoints included breast p CR(bp CR),objective response rate(ORR), disease control rate, rate of breast-conserving surgery(BCS), and safety(with a focus on cardiotoxicity).Results: Between May 27, 2020 and May 11, 2022, 78 patients were treated with surgery, 42(53.8%) of whom had BCS. After neoadjuvant therapy, 47 [60.3%, 95% confidence interval(95% CI), 48.5%-71.2%] patients achieved tp CR, and 49(62.8%) achieved bp CR. ORRs were 76.9%(95% CI, 66.0%-85.7%) and 93.6%(95% CI,85.7%-97.9%) after 4-cycle and 8-cycle neoadjuvant therapy, respectively. Nine(11.5%) patients experienced asymptomatic left ventricular ejection fraction(LVEF) reductions of ≥10% from baseline, all with a minimum value of >55%. No treatment-related abnormal cardiac function changes were observed in mean N-terminal pro-BNP(NT-pro BNP), troponin I, or high-sensitivity troponin.Conclusions: This dual HER2-blockade with sequential polychemotherapy showed promising activity with rapid tumor regression in HER2-positive BC. Importantly, this regimen showed an acceptable safety profile,especially a low risk of cardiac events, suggesting it as an attractive treatment approach with a favorable risk-benefit balance.展开更多
Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation en...Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved.展开更多
The emergence of polymerized small molecule acceptors(PSMAs)has significantly improved the performance of all-polymer solar cells(all-PSCs).However,the pace of device engineering lacks behind that of materials develop...The emergence of polymerized small molecule acceptors(PSMAs)has significantly improved the performance of all-polymer solar cells(all-PSCs).However,the pace of device engineering lacks behind that of materials development,so that a majority of the PSMAs have not fulfilled their potentials.Furthermore,most high-performance all-PSCs rely on the use of chloroform as the processing solvent.For instance,the recent highperformance PSMA,named PJ1-γ,with high LUMO,and HOMO levels,could only achieve a PCE of 16.1%with a high-energy-level donor(JD40)using chloroform.Herein,we present a methodology combining sequential processing(SqP)with the addition of 0.5%wt PC_(71)BM as a solid additive(SA)to achieve an impressive efficiency of 18.0%for all-PSCs processed from toluene,an aromatic hydrocarbon solvent.Compared to the conventional blend-casting(BC)method whose best efficiency(16.7%)could only be achieved using chloroform,the SqP method significantly boosted the device efficiency using toluene as the processing solvent.In addition,the donor we employ is the classic PM6 that has deeper energy levels than JD40,which provides low energy loss for the device.We compare the results with another PSMA(PYF-T-o)with the same method.Finally,an improved photostability of the SqP devices with the incorporation of SA is demonstrated.展开更多
基金supported by the National Natural Science Foundation of China(No.62203256)。
文摘Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequential Convex Programming(SFC-SCP)to improve the computation efficiency and reliability of trajectory generation.SFC-SCP combines the front-end convex polyhedron SFC construction and back-end SCP-based trajectory optimization.A Sparse A^(*)Search(SAS)driven SFC construction method is designed to efficiently generate polyhedron SFC according to the geometric relation among obstacles and collision-free waypoints.Via transforming the nonconvex obstacle-avoidance constraints to linear inequality constraints,SFC can mitigate infeasibility of trajectory planning and reduce computation complexity.Then,SCP casts the nonlinear trajectory optimization subject to SFC into convex programming subproblems to decrease the problem complexity.In addition,a convex optimizer based on interior point method is customized,where the search direction is calculated via successive elimination to further improve efficiency.Simulation experiments on dense obstacle scenarios show that SFC-SCP can generate dynamically feasible safe trajectory rapidly.Comparative studies with state-of-the-art SCP-based methods demonstrate the efficiency and reliability merits of SFC-SCP.Besides,the customized convex optimizer outperforms off-the-shelf optimizers in terms of computation time.
基金support from Mobility Programme of the Sino-German Center(M-0056)National Natural Science Foundation of China(52101286)+2 种基金Natural Science Foundation of Liaoning Province(2022-YGJC-16)Fundamental Research Funds for the Central Universities(N2302017)Supported by Sichuan Science and Technology Program 2023ZYD0115Shenyang Young and Middle-aged Science and Technology Innovation Talent Support Program(RC231178).
文摘A gradient coating containing collagen and inorganic strontium/calcium phosphate(Sr/CaP)was fabricated on plasma-electrolytically oxidised magnesium via one-step cathodic electrodeposition.First,Sr-doped dicalcium phosphate dihydrate and hydroxyapatite(DCPD and HA)was deposited,followed by a collagen/CaP layer.The morphological evolution,sequential degradation behaviour,and in vitro bio-properties of the coatings were investigated.The incorporation of collagen remarkably refined the morphology of the CaP,and a more aggregated nano-spherical morphology was observed with increasing collagen concentration.Sr could partially replace Ca in the CaP crystals.Collagen combined with CaP formed a relatively stable skeletal frame,which provided sufficient barrier properties and more sites for the re-precipitation of bone tissue,as well as a more promising proliferation and differentiation ability of osteoblasts.A gradient coating that matches the requirements of bone growth at various periods is suggested for implantation.
基金the National Natural Science Foundation of China(No.52205210)the Natural Science Foundation of Shandong Province(Nos.ZR2020MB018,ZR2022QE033 and ZR2021QB049).
文摘Achieving artificial simulations of multi-step energy transfer processes and conversions in nature remains a challenge.In this study,we present a three-step sequential energy transfer process,which was constructed through host-vip interactions between a piperazine derivative(PPE-BPI)with aggregationinduced emission(AIE)and cucurbit[7]uril(CB[7])in water to serve as ideal energy donors.To achieve multi-step sequential energy transfer,we employ three distinct fluorescent dyes Eosin B(EsB),Sulforhodamine 101(SR101),and Cyanine 5(Cy5)as energy acceptors.The PPE-PBI-2CB[7]+EsB+SR101+Cy5 system demonstrates a highly efficient three-step sequential energy transfer mechanism,starting with PPEPBI-2CB[7]and transferring energy successively to EsB,SR101,and finally to Cy5,with remarkable energy transfer efficiencies.More interestingly,with the progressive transfer of energy in the multi-step energy transfer system,the generation efficiency of superoxide anion radical(O_(2)•-)increased gradually,which can be used as photocatalysts for selectively photooxidation of N-phenyltetrahydroisoquinoline in an aqueous medium with a high yield of 86%after irradiation for 18 h.This study offers a valuable investigation into the simulation of multi-step energy transfer processes and transformations in the natural world,paving the way for further research in the field.
文摘Background:Recent scholarly attention has increasingly focused on filial piety beliefs'impact on youth's psychological development.However,the mechanisms by which filial piety indirectly influences adolescent autonomy through depression and well-being remain underexplored.This study aimed to test a sequential mediation model among filial piety beliefs,depression,well-being,and autonomy in Taiwan region of China university students.Methods:A total of 566 Taiwan region of China undergraduate and graduate students,comprising 390 females and 176 males,and including 399 undergraduates and 167 graduate students,were recruited through convenience sampling.Data were collected via an online questionnaire.Validated instruments were employed,including the Filial Piety Scale(FPS),the Center for Epidemiological Studies Depression Scale(CES-D),the Chinese Well-being Inventory(CHI),and the Adolescent Autonomy Scale-Short Form(AAS-SF).Statistical analyses included group comparisons,correlation analyses,and structural equation modeling to examine the hypothesized relationships and mediation effects.Results:The results revealed that filial piety beliefs exerted a significant positive impact on adolescent autonomy,with depression and well-being serving as key mediators in this relationship.A sequential mediation effect was confirmed through structural equation modeling(β=0.052,95%CI[0.028,0.091]),with good model fit indices(x^(2)/df=4.25,RMSEA=0.076,CFI=0.968),supporting the hypothesized pathway from filial piety to autonomy via depression and well-being.In terms of demographic differences,male students showed significantly higher autonomy than females(p<0.001);students from single-parent families reported significantly higher depression levels than those from two-parent families(p<0.05);and graduate students exhibited significantly higher autonomy and well-being than undergraduates(p<0.05).Conclusions:These findings underscore not only the importance of filial piety beliefs for developing youth autonomy but also the critical role that mental health factors,such as depression and well-being,play in this process.The study concludes with a discussion of both theoretical implications and practical recommendations.These include strategies to foster reciprocal filial piety,strengthen parent-child relationships,and promote mental health.Additionally,the study outlines its limitations and proposes directions for future research.
基金supported by the Guangdong Basic and Applied Basic Research Foundation (2022A1515010875)National Natural Science Foundation of China (12404480)+4 种基金Shenzhen Science and Technology Program (JCYJ20240813113238050, JCYJ20240813113306008)Education Department of Guangdong Province (2021KCXTD045)National Natural Science Foundation of China (12274303)the Shenzhen Key Laboratory of Applied Technologies of Super-Diamond and Functional Crystals (ZDSYS20230626091303007)Characteristic Innovation Foundation of Higher Education Institutions of Guangdong Province (2022KTSCX116)
文摘Sequential processing(SqP)of the active layer offers independent optimization of the donor and acceptor with more targeted solvent design,which is considered the most promising strategy for achieving efficient organic solar cells(OSCs).In the SqP method,the favorable interpenetrating network seriously depends on the fine control of the bottom layer swelling.However,the choice of solvent(s)for both the donor and acceptor have been mostly based on a trial-and-error manner.A single solvent often cannot achieve sufficient yet not excessive swelling,which has long been a difficulty in the high efficient SqP OSCs.Herein,two new isomeric molecules are introduced to fine-tune the nucleation and crystallization dynamics that allows judicious control over the swelling of the bottom layer.The strong non-covalent interaction between the isomeric molecule and active materials provides an excellent driving force for optimize the swelling-process.Among them,the molecule with high dipole moment promotes earlier nucleation of the PM6 and provides extended time for crystallization during SqP,improving bulk morphology and vertical phase segregation.As a result,champion efficiencies of 17.38%and 20.00%(certified 19.70%)are achieved based on PM6/PYF-T-o(all-polymer)and PM6/BTP-eC9 devices casted by toluene solvent.
基金supported by the Tencent Charity Foundationthe Ningxia Hui Autonomous Region Key Research and Development Program(No.2021BEG 02025)+1 种基金the Flexible Introduction of Technological Innovation Teams of Ningxia Hui Autonomous Region(No.2021RXTDLX15)the Natural Science Foundation of China(No.82160644)。
文摘Objective:A risk-based sequential screening strategy,from questionnaire-based assessment to biomarker measurement and then to endoscopic examination,has the potential to enhance gastric cancer(GC)screening efficiency.We aimed to evaluate the ability of five common stomach-specific serum biomarkers to further enrich high-risk individuals for GC in the questionnaire-identified high-risk population.Methods:This study was conducted based on a risk-based screening program in Ningxia Hui Autonomous Region,China.We first performed questionnaire assessment involving 23,381 individuals(7,042 outpatients and 16,339 individuals from the community),and those assessed as“high-risk”were then invited to participate in serological assays and endoscopic examinations.The serological biomarker model was derived based on logistic regression,with predictors selected via the Akaike information criterion.Model performance was evaluated by the area under the receiver operating characteristic curve(AUC).Results:A total of 2,011 participants were ultimately included for analysis.The final serological biomarker model had three predictors,comprising pepsinogenⅠ(PGI),pepsinogenⅠ/Ⅱratio(PGR),and anti-Helicobacter pylori immunoglobulin G(anti-H.pylori IgG)antibodies.This model generated an AUC of 0.733(95%confidence interval:0.655-0.812)and demonstrated the best discriminative ability compared with previously developed serological biomarker models.As the risk cut-off value of our model rose,the detection rate increased and the number of endoscopies needed to detect one case decreased.Conclusions:PGI,PGR,and anti-H.pylori Ig G could be jointly used to further enrich high-risk individuals for GC among those selected by questionnaire assessment,providing insight for the development of a multi-stage riskbased sequential strategy for GC screening.
基金the National Natural Science Foundation of China(Nos.22171147 and 21871148)for the financial support。
文摘Polycyclic compounds are widely found in natural products and drug molecules with important biological activities,which attracted the attention of many chemists.Phosphine-catalyzed nucleophilic addition is one of the most powerful tools for the construction of various cyclic compounds with the advantages of atom economy,mild reaction conditions and simplicity of operation.Allenolates,Morita−Baylis−Hillman(MBH)alcohols and their derivatives(MBHADs),electron-deficient olefins and alkynes are very efficient substrates in phosphine mediated annulations,which formed many phosphonium species such asβ-phosphonium enolates,β-phosphonium dienolates and vinyl phosphonium ylides as intermediates.This review describes the reactivities of these phosphonium zwitterions and summarizes the synthesis of polycycle compounds through phosphine-mediated intramolecular and intermolecular sequential annulations.Thus,a systematic summary of the research process based on the phosphine-mediated sequential annulations of allenolates,MBH alcohols and MBHADs,electron-deficient olefins and alkynes are presented in Chapters 2-6,respectively.
基金supported by the National Natural Science Foundation of China(Nos.U2267205 and 12475124)a ZSTU intramural grant(22062267-Y)Excellent Graduate Thesis Cultivation Fund(LW-YP2024011).
文摘Nuclear mass is an important property in both nuclear and astrophysics.In this study,we explore an improved mass model that incorporates a higher-order term of symmetry energy using algorithms.The sequential least squares programming(SLSQP)algorithm augments the precision of this multinomial mass model by reducing the error from 1.863 MeV to 1.631 MeV.These algorithms were further examined using 200 sample mass formulae derived from theδE term of the E_(isospin) mass model.The SLSQP method exhibited superior performance compared to the other algorithms in terms of errors and convergence speed.This algorithm is advantageous for handling large-scale multiparameter optimization tasks in nuclear physics.
基金financially supported by the Sichuan Science and Technology Program(2023NSFSC0990,2023YFH0085,2023YFH0086,and 2023YFH0087)the State Key Laboratory of Polymer Materials Engineering(sklpme2022-3-02,sklpme20232-11,and sklpme2024-2-15)。
文摘Morphological control is recognized as a pivotal factor in developing high-performing solution-processed organic photovoltaics(OPVs).The essence of achieving optimal morphology in a sequentially deposited active layer lies in the precise modulation of the micro-morphology of the donor phase,encompassing molecular arrangement,orientation,and crystalline structure.The micro-morphology of the polymer donor layer plays a significant role in determining the vertical composition distribution and the adequacy of the donor/acceptor(D/A)interfaces.In this work,self-solvent vapor annealing(S-SVA)is employed to meticulously engineer the π-πstacking and crystalline domains of polymer donor PM6.This is accomplished by precisely adjusting the evaporation kinetics of the self-solvent and leveraging the swelling effect induced by residual self-solvents,thereby enhancing the self-assembly of PM6 molecules.The resultant improvements inπ-πstacking and coherence length have led to efficient charge transport.These refinements have translated into a power conversion efficiency of 18.2%,accompanied by an open-circuit voltage of 0.886 V,a short-circuit current density of 25.9 mA cm^(-2),and a fill factor of 79.4%.The straightforward yet impactful method not only enhances film crystallinity and device performance but also holds broad application potential.
文摘The single-point bending method,based on atomic force microscopy(AFM),has been extensively validated for characterizing the structural mechanical properties of micro-and nanobeams.Nevertheless,the influence of AFM probe loading and positioning has yet to be subjected to comprehensive investigation.This paper proposes a novel bending-test method based on sequential loading points,in which a series of evenly distributed loads are applied along the length of the central axis on the upper surface of the cantilever.The preliminary measured values of Young’s modulus for an unknown alloy material were 193,178,and 176 GPa,exhibiting a considerable degree of dispersion.An algorithm for self-correction of the positioning error was developed,and this resulted in a positioning error of 53 nm and a final converged Young’s modulus of 161 GPa.
文摘Background:Hepatocellular carcinoma (HCC) is a leading cause of cancer-related mortality. While liver transplantation (LT) provides the best long-term survival, it is constrained by organ scarcity and strict criteria. Liver resection (LR) is often the initial treatment for patients with solitary tumors and preserved liver function. The high recurrence rates associated with LR has prompted the exploration of sequential living donor liver transplantation (seq LDLT) after LR as a strategy for HCC patients with high-risk of recurrence.Methods:We analyzed data from 27 adult patients who underwent seq LDLT after LR for HCC at Kaohsiung Chang Gung Memorial Hospital (KCGMH) between June 1994 and December 2023. Patients were selected based on high-risk histopathological features post-LR or as part of downstaging strategy. Outcomes measured included overall survival (OS) and disease-free survival (DFS).Results:Among 765 HCC patients who underwent LDLT, 204 received LR before LDLT, and 27 underwent seqL DLT. Five patients (19%) underwent living donor liver transplantation (LDLT) following LR as a downstaging strategy while the rest received seqL DLT as a preemptive strategy. The median age was 53.5 years with 85%males. Chronic hepatitis B was the predominant underlying disease (74%). The 1-, 3-, and 5-year OS and DFS rates were 100%, 96.0%, 96.0%and 100%, 96.2%, 96.2%, respectively, with two patients experiencing HCC recurrence. One patient died from HCC recurrence. High-risk histopathological features included microvascular invasion (52%), satellite nodules (15%), multiple tumors (26%), tumors> 5 cm(19%), and a total tumor diameter> 10 cm (7%).Conclusions:Seq LDLT offers a promising, tailored approach for managing HCC with adverse histopathologic features. Combining seq LDLT, downstaging strategies, and multidisciplinary treatments can achieve satisfactory OS and DFS in carefully selected patients, highlighting the need for refined criteria to identify the best candidates.
基金supported by a grant from the Natural Science Foundation of Zhejiang Province under Grant LY21F010016.
文摘Recently,many Sequential Recommendation methods adopt self-attention mechanisms to model user preferences.However,these methods tend to focus more on low-frequency information while neglecting highfrequency information,which makes them ineffective in balancing users’long-and short-term preferences.At the same time,manymethods overlook the potential of frequency domainmethods,ignoring their efficiency in processing frequency information.To overcome this limitation,we shift the focus to the combination of time and frequency domains and propose a novel Hybrid Time-Frequency Dual-Branch Transformer for Sequential Recommendation,namely HyTiFRec.Specifically,we design two hybrid filter modules:the learnable hybrid filter(LHF)and the window hybrid filter(WHF).We combine these with the Efficient Attention(EA)module to form the dual-branch structure to replace the self-attention components in Transformers.The EAmodule is used to extract sequential and global information.The LHF andWHF modules balance the proportion of different frequency bands,with LHF globally modulating the spectrum in the frequency domain and WHF retaining frequency components within specific local frequency bands.Furthermore,we use a time domain residual information addition operation in the hybrid filter module,which reduces information loss and further facilitates the hybrid of time-frequency methods.Extensive experiments on five widely-used real-world datasets show that our proposed method surpasses state-of-the-art methods.
基金the financial support from the National Key R&D Program of China(Grant No.2021YFC3001003)Science and Technology Development Fund,Macao SAR(File No.0056/2023/RIB2)Guangdong Provincial Department of Science and Technology(Grant No.2022A0505030019).
文摘Challenges in stratigraphic modeling arise from underground uncertainty.While borehole exploration is reliable,it remains sparse due to economic and site constraints.Electrical resistivity tomography(ERT)as a cost-effective geophysical technique can acquire high-density data;however,uncertainty and nonuniqueness inherent in ERT impede its usage for stratigraphy identification.This paper integrates ERT and onsite observations for the first time to propose a novel method for characterizing stratigraphic profiles.The method consists of two steps:(1)ERT for prior knowledge:ERT data are processed by soft clustering using the Gaussian mixture model,followed by probability smoothing to quantify its depthdependent uncertainty;and(2)Observations for calibration:a spatial sequential Bayesian updating(SSBU)algorithm is developed to update the prior knowledge based on likelihoods derived from onsite observations,namely topsoil and boreholes.The effectiveness of the proposed method is validated through its application to a real slope site in Foshan,China.Comparative analysis with advanced borehole-driven methods highlights the superiority of incorporating ERT data in stratigraphic modeling,in terms of prediction accuracy at borehole locations and sensitivity to borehole data.Informed by ERT,reduced sensitivity to boreholes provides a fundamental solution to the longstanding challenge of sparse measurements.The paper further discusses the impact of ERT uncertainty on the proposed model using time-lapse measurements,the impact of model resolution,and applicability in engineering projects.This study,as a breakthrough in stratigraphic modeling,bridges gaps in combining geophysical and geotechnical data to address measurement sparsity and paves the way for more economical geotechnical exploration.
基金co-supported by the National Natural Science Foundation of China(Nos.51875014,U2233212 and 51875015)the Natural Science Foundation of Beijing Municipality,China(No.L221008)+1 种基金Science,Technology Innovation 2025 Major Project of Ningbo of China(No.2022Z005)the Tianmushan Laboratory Project,China(No.TK2023-B-001)。
文摘For uncertainty quantification of complex models with high-dimensional,nonlinear,multi-component coupling like digital twins,traditional statistical sampling methods,such as random sampling and Latin hypercube sampling,require a large number of samples,which entails huge computational costs.Therefore,how to construct a small-size sample space has been a hot issue of interest for researchers.To this end,this paper proposes a sequential search-based Latin hypercube sampling scheme to generate efficient and accurate samples for uncertainty quantification.First,the sampling range of the samples is formed by carving the polymorphic uncertainty based on theoretical analysis.Then,the optimal Latin hypercube design is selected using the Latin hypercube sampling method combined with the"space filling"criterion.Finally,the sample selection function is established,and the next most informative sample is optimally selected to obtain the sequential test sample.Compared with the classical sampling method,the generated samples can retain more information on the basis of sparsity.A series of numerical experiments are conducted to demonstrate the superiority of the proposed sequential search-based Latin hypercube sampling scheme,which is a way to provide reliable uncertainty quantification results with small sample sizes.
基金supported in part by the National Natural Science Foundation of China under Grant 61972424 and 62372479in part by the High Value Intellectual Property Cultivation Project of Hubei Province,China,under grant D2021002094+1 种基金in part by JSPS KAKENHI under Grants JP16K00117 and JP19K20250in part by the Leading Initiative for Excellent Young Researchers(LEADER),MEXT,Japan,and KDDI Foundation.
文摘Named data networking(NDNs)is an idealized deployment of information-centric networking(ICN)that has attracted attention from scientists and scholars worldwide.A distributed in-network caching scheme can efficiently realize load balancing.However,such a ubiquitous caching approach may cause problems including duplicate caching and low data diversity,thus reducing the caching efficiency of NDN routers.To mitigate these caching problems and improve the NDN caching efficiency,in this paper,a hierarchical-based sequential caching(HSC)scheme is proposed.In this scheme,the NDN routers in the data transmission path are divided into various levels and data with different request frequencies are cached in distinct router levels.The aim is to cache data with high request frequencies in the router that is closest to the content requester to increase the response probability of the nearby data,improve the data caching efficiency of named data networks,shorten the response time,and reduce cache redundancy.Simulation results show that this scheme can effectively improve the cache hit rate(CHR)and reduce the average request delay(ARD)and average route hop(ARH).
基金financially supported by the National Key R&D Program (2022YFB4201302)Guang Dong Basic and Applied Basic Research Foundation (2022A1515240057)the Huaneng Technology Funds (HNKJ20-H88).
文摘This paper offers an extensive overview of the utilization of sequential approximate optimization approaches in the context of numerically simulated large-scale continuum structures.These structures,commonly encountered in engineering applications,often involve complex objective and constraint functions that cannot be readily expressed as explicit functions of the design variables.As a result,sequential approximation techniques have emerged as the preferred strategy for addressing a wide array of topology optimization challenges.Over the past several decades,topology optimization methods have been advanced remarkably and successfully applied to solve engineering problems incorporating diverse physical backgrounds.In comparison to the large-scale equation solution,sensitivity analysis,graphics post-processing,etc.,the progress of the sequential approximation functions and their corresponding optimizersmake sluggish progress.Researchers,particularly novices,pay special attention to their difficulties with a particular problem.Thus,this paper provides an overview of sequential approximation functions,related literature on topology optimization methods,and their applications.Starting from optimality criteria and sequential linear programming,the other sequential approximate optimizations are introduced by employing Taylor expansion and intervening variables.In addition,recent advancements have led to the emergence of approaches such as Augmented Lagrange,sequential approximate integer,and non-gradient approximation are also introduced.By highlighting real-world applications and case studies,the paper not only demonstrates the practical relevance of these methods but also underscores the need for continued exploration in this area.Furthermore,to provide a comprehensive overview,this paper offers several novel developments that aim to illuminate potential directions for future research.
基金supported by the STI2030-Major Project(2021ZD0203600)with additional support from the Shanghai Municipal Science and Technology Commission(2018SHZDZX05 and 2018ZR1406500)+3 种基金the Shanghai Pujiang Program(19PJ1407500)the Shanghai Jiao Tong University Medical and Engineering Cross Research Fund(YG2019QNA31)the Shanghai Municipal Health Commission Clinical Study Special Fund(20194Y0067)the Ruijin Hospital Guangci Excellence Youth Training Program(GCQN-2019-B10).
文摘The prefrontal cortex and hippocampus may support sequential working memory beyond episodic memory and spatial navigation.This stereoelectroencephalography(SEEG)study investigated how the dorsolateral prefrontal cortex(DLPFC)interacts with the hippocampus in the online processing of sequential information.Twenty patients with epilepsy(eight women,age 27.6±8.2 years)completed a line ordering task with SEEG recordings over the DLPFC and the hippocampus.Participants showed longer thinking times and more recall errors when asked to arrange random lines clockwise(random trials)than to maintain ordered lines(ordered trials)before recalling the orientation of a particular line.First,the ordering-related increase in thinking time and recall error was associated with a transient theta power increase in the hippocampus and a sustained theta power increase in the DLPFC(3–10 Hz).In particular,the hippocampal theta power increase correlated with the memory precision of line orientation.Second,theta phase coherences between the DLPFC and hippocampus were enhanced for ordering,especially for more precisely memorized lines.Third,the theta band DLPFC→hippocampus influence was selectively enhanced for ordering,especially for more precisely memorized lines.This study suggests that theta oscillations may support DLPFC-hippocampal interactions in the online processing of sequential information.
基金supported by the National Natural Science Foundation of China (No. 82003311, No. 82061148016, No. 82230057 and No. 82272859)National Key R&D Program of China (No. 2022YFC2505101)+2 种基金Sun Yat-Sen Clinical Research Cultivating Program (No. SYS-Q202004)Beijing Medical Award Foundation (No. YXJL2020-0941-0760)Guangzhou Science and Technology Program (No. 202102010272 and No. 202201020486)。
文摘Objective: Despite cardiotoxicity overlap, the trastuzumab/pertuzumab and anthracycline combination remains crucial due to significant benefits. Pegylated liposomal doxorubicin(PLD), a less cardiotoxic anthracycline, was evaluated for efficacy and cardiac safety when combined with cyclophosphamide and followed by taxanes with trastuzumab/pertuzumab in human epidermal growth factor receptor-2(HER2)-positive early breast cancer(BC).Methods: In this multicenter, phase II study, patients with confirmed HER2-positive early BC received four cycles of PLD(30-35 mg/m^(2)) and cyclophosphamide(600 mg/m^(2)), followed by four cycles of taxanes(docetaxel,90-100 mg/m^(2) or nab-paclitaxel, 260 mg/m^(2)), concomitant with eight cycles of trastuzumab(8 mg/kg loading dose,then 6 mg/kg) and pertuzumab(840 mg loading dose, then 420 mg) every 3 weeks. The primary endpoint was total pathological complete response(tp CR, yp T0/is yp N0). Secondary endpoints included breast p CR(bp CR),objective response rate(ORR), disease control rate, rate of breast-conserving surgery(BCS), and safety(with a focus on cardiotoxicity).Results: Between May 27, 2020 and May 11, 2022, 78 patients were treated with surgery, 42(53.8%) of whom had BCS. After neoadjuvant therapy, 47 [60.3%, 95% confidence interval(95% CI), 48.5%-71.2%] patients achieved tp CR, and 49(62.8%) achieved bp CR. ORRs were 76.9%(95% CI, 66.0%-85.7%) and 93.6%(95% CI,85.7%-97.9%) after 4-cycle and 8-cycle neoadjuvant therapy, respectively. Nine(11.5%) patients experienced asymptomatic left ventricular ejection fraction(LVEF) reductions of ≥10% from baseline, all with a minimum value of >55%. No treatment-related abnormal cardiac function changes were observed in mean N-terminal pro-BNP(NT-pro BNP), troponin I, or high-sensitivity troponin.Conclusions: This dual HER2-blockade with sequential polychemotherapy showed promising activity with rapid tumor regression in HER2-positive BC. Importantly, this regimen showed an acceptable safety profile,especially a low risk of cardiac events, suggesting it as an attractive treatment approach with a favorable risk-benefit balance.
基金the financial support from the National Key R&D program of China(2021YFF0500501 and 2021YFF0500504)the Fundamental Research Funds for the Central Universities(YJS2213 and JB211408)+1 种基金the National Natural Science Foundation of China(61874083)the Joint Research Funds of Department of Science&Technology of Shaanxi Province and Northwestern Polytechnical University(No.2020GXLH-Z-014)
文摘Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved.
基金supported by the Guangdong Basic and Applied Basic Research Foundation(2022A1515010875)Guangdong Basic and Applied Basic Research Foundation(2021A1515110017)+10 种基金Natural Science Foundation of Top Talent of SZTU(grant no.20200205)Project of Education Commission of Guangdong Province of China(2021KQNCX080)Research on the electrochemical reaction mechanism of the anode of mediumlow temperature direct ammonia SOFCs(20231063020006)the project of al solid-state high energy density energy storage system(20221063010031)the project of Shenzhen Overseas Talent upon Industrialization of 1kw stack for direct ammonia SOFCs(20221061010002)Guangdong Basic and Applied Basic Research Foundation(No.2019A1515011673)Education Department of Guangdong Province(No.2021KCXTD045)National Natural Science Foundation of China(No.12274303)the support from the Fundamental Research Funds for the Central Universities(2232023A-01)NSFC No.52103202beamline BL16B1 at Shanghai Synchrotron Radiation Facility(SSRF)for the synchrotron experiment
文摘The emergence of polymerized small molecule acceptors(PSMAs)has significantly improved the performance of all-polymer solar cells(all-PSCs).However,the pace of device engineering lacks behind that of materials development,so that a majority of the PSMAs have not fulfilled their potentials.Furthermore,most high-performance all-PSCs rely on the use of chloroform as the processing solvent.For instance,the recent highperformance PSMA,named PJ1-γ,with high LUMO,and HOMO levels,could only achieve a PCE of 16.1%with a high-energy-level donor(JD40)using chloroform.Herein,we present a methodology combining sequential processing(SqP)with the addition of 0.5%wt PC_(71)BM as a solid additive(SA)to achieve an impressive efficiency of 18.0%for all-PSCs processed from toluene,an aromatic hydrocarbon solvent.Compared to the conventional blend-casting(BC)method whose best efficiency(16.7%)could only be achieved using chloroform,the SqP method significantly boosted the device efficiency using toluene as the processing solvent.In addition,the donor we employ is the classic PM6 that has deeper energy levels than JD40,which provides low energy loss for the device.We compare the results with another PSMA(PYF-T-o)with the same method.Finally,an improved photostability of the SqP devices with the incorporation of SA is demonstrated.
