In this paper, a semiactive variable stiffness （SVS） device is used to decrease cable oscillations caused by parametric excitation, and the equation of motion of the parametric vibration of the cable with this SVS d...In this paper, a semiactive variable stiffness （SVS） device is used to decrease cable oscillations caused by parametric excitation, and the equation of motion of the parametric vibration of the cable with this SVS device is presented. The ON/OFF control algorithm is used to operate the SVS control device. The vibration response of the cable with the SVS device is numerically studied for a variety of additional stiffness combinations in both the frequency and time domains and for both parametric and classical resonance vibration conditions. The numerical studies further consider the cable sag effect. From the numerical results, it is shown that the SVS device effectively suppresses the cable resonance vibration response, and as the stiffness of the device increases, the device achieves greater suppression of vibration. Moreover, it was shown that the SVS device increases the critical axial displacement of the excitation under cable parametric vibration conditions.展开更多
A new design of robot gripper with electrorheological fluid (ERF) semiactive tips is described. There are two remarkable properties using this fingertip. One is the higher lifting capability at little grasp force, whi...A new design of robot gripper with electrorheological fluid (ERF) semiactive tips is described. There are two remarkable properties using this fingertip. One is the higher lifting capability at little grasp force, which can realize stable grasp. Another is the damping controllable which can be used for controlling contact forces. A viscoelastic plastic model for normal direction of the fingertip is proposed to explore the contact behavior. The electric field strength is induced into the dynamic model of contact transition for simulations. The simulation results and conclusions are given.展开更多
This paper investigates the problem of controlling half-vehicle semi-active suspension system involving a magnetorheological(MR)damper.This features a hysteretic behavior that is presently captured through the nonline...This paper investigates the problem of controlling half-vehicle semi-active suspension system involving a magnetorheological(MR)damper.This features a hysteretic behavior that is presently captured through the nonlinear Bouc-Wen model.The control objective is to regulate well the heave and the pitch motions of the chassis despite the road irregularities.The difficulty of the control problem lies in the nonlinearity of the system model,the uncertainty of some of its parameters,and the inaccessibility to measurements of the hysteresis internal state variables.Using Lyapunov control design tools,we design two observers to get online estimates of the hysteresis internal states and a stabilizing adaptive state-feedback regulator.The whole adaptive controller is formally shown to meet the desired control objectives.This theoretical result is confirmed by several simulations demonstrating the supremacy of the latter compared to the skyhook control and passive suspension.展开更多
Wind turbine technology is well known around the globe as an eco-friendly and eff ective renewable power source. However, this technology often faces reliability problems due to structural vibration. This study propos...Wind turbine technology is well known around the globe as an eco-friendly and eff ective renewable power source. However, this technology often faces reliability problems due to structural vibration. This study proposes a smart semi-active vibration control system using Magnetorheological (MR) dampers where feedback controllers are optimized with nature-inspired algorithms. Proportional integral derivative (PID) and Proportional integral (PI) controllers are designed to achieve the optimal desired force and current input for MR the damper. PID control parameters are optimized using an Ant colony optimization (ACO) algorithm. The eff ectiveness of the ACO algorithm is validated by comparing its performance with Ziegler-Nichols (Z-N) and particle swarm optimization (PSO). The placement of the MR damper on the tower is also investigated to ensure structural balance and optimal desired force from the MR damper. The simulation results show that the proposed semi-active PID-ACO control strategy can signifi cantly reduce vibration on the wind turbine tower under diff erent frequencies (i.e., 67%, 73%, 79% and 34.4% at 2 Hz, 3 Hz, 4.6 Hz and 6 Hz, respectively) and amplitudes (i.e. 50%, 58% and 67% for 50 N, 80 N, and 100 N, respectively). In this study, the simulation model is validated with an experimental study in terms of natural frequency, mode shape and uncontrolled response at the 1st mode. The proposed PID-ACO control strategy and optimal MR damper position is also implemented on a lab-scaled wind turbine tower model. The results show that the vibration reduction rate is 66% and 73% in the experimental and simulation study, respectively, at the 1st mode.展开更多
The magnetorheological （MR） fluid damper-based semiactive control systems have received considerable attention for protecting structures against natural hazards such as strong earthquakes and high winds. In this pap...The magnetorheological （MR） fluid damper-based semiactive control systems have received considerable attention for protecting structures against natural hazards such as strong earthquakes and high winds. In this paper, a novel modal controller using wavelet packet transform （WPT） is proposed for the vibration control of distributed structures. In the proposed control system, the WPT method is utilized to decompose the acceleration measurement and select the modes containing most of the WPT energy component as the dominant modes. Then, a modal controller is designed to control the dominant modes and the optimal active control force is solved. Finally, Clipped-optimal con- trol law is adopted to determine the voltage applied to each MR damper. A Kalman-filter observer, which estimates the full controlled modal states from local accelerometer feedbacks, is designed for rendering the controller to be more applicable to distributed structures with a large number of degrees of freedom. A numerical example of a stadium root structure installed with MRF-04K damper is presented. The effectiveness of the controller is evaluated under both Tianjin and E1 Centro earthquake excitations. The superior performance and adaptability of the controller for versatile loading conditions are demonstrated through the comparison with traditional truncated modal controller.展开更多
A crawler system provides much larger ground contact,leading to excellent terrain adaptability.Due to its structural characteristics,high‐frequency vibration proportional to the vehicle speed is generated during the ...A crawler system provides much larger ground contact,leading to excellent terrain adaptability.Due to its structural characteristics,high‐frequency vibration proportional to the vehicle speed is generated during the driving process.This is a result of the polygon and rolling effects between the track and the wheels.A field test of a tracked vehicle is performed to monitor movement signals of the chassis and a rocker arm.Their corresponding power spectral density distributions confirm the correctness of the frequency‐calculation equation.Then,a novel elastic track tensioning device with a damper is designed as a cushion between the idler and the chassis.Depending on its geometry,the equivalent damping coefficient for a dynamic model is evaluated.Subsequently,the damping is altered in response to different operating conditions by a hybrid damping fuzzy semiactive control system.The controller accounts for both chassis and track vibration.Based on the transfer matrix method for multibody systems,a dynamical model of the track system is developed.Control performances are evaluated using two numerical simulations of obstacle crossing and off‐road driving operations.Results indicate that the proposed semiactive tensioner is substantially better than the conventional one.This paper provides a novel feasible scheme for vibration reduction of tracked vehicles.展开更多
基金National Natural Science Foundation of China Under Grant No. 50178025
文摘In this paper, a semiactive variable stiffness （SVS） device is used to decrease cable oscillations caused by parametric excitation, and the equation of motion of the parametric vibration of the cable with this SVS device is presented. The ON/OFF control algorithm is used to operate the SVS control device. The vibration response of the cable with the SVS device is numerically studied for a variety of additional stiffness combinations in both the frequency and time domains and for both parametric and classical resonance vibration conditions. The numerical studies further consider the cable sag effect. From the numerical results, it is shown that the SVS device effectively suppresses the cable resonance vibration response, and as the stiffness of the device increases, the device achieves greater suppression of vibration. Moreover, it was shown that the SVS device increases the critical axial displacement of the excitation under cable parametric vibration conditions.
文摘A new design of robot gripper with electrorheological fluid (ERF) semiactive tips is described. There are two remarkable properties using this fingertip. One is the higher lifting capability at little grasp force, which can realize stable grasp. Another is the damping controllable which can be used for controlling contact forces. A viscoelastic plastic model for normal direction of the fingertip is proposed to explore the contact behavior. The electric field strength is induced into the dynamic model of contact transition for simulations. The simulation results and conclusions are given.
文摘This paper investigates the problem of controlling half-vehicle semi-active suspension system involving a magnetorheological(MR)damper.This features a hysteretic behavior that is presently captured through the nonlinear Bouc-Wen model.The control objective is to regulate well the heave and the pitch motions of the chassis despite the road irregularities.The difficulty of the control problem lies in the nonlinearity of the system model,the uncertainty of some of its parameters,and the inaccessibility to measurements of the hysteresis internal state variables.Using Lyapunov control design tools,we design two observers to get online estimates of the hysteresis internal states and a stabilizing adaptive state-feedback regulator.The whole adaptive controller is formally shown to meet the desired control objectives.This theoretical result is confirmed by several simulations demonstrating the supremacy of the latter compared to the skyhook control and passive suspension.
基金University of Malaya Research under Grant No.RP013B-15SUS,Postgraduate Research Fund(PG098-2015A)
文摘Wind turbine technology is well known around the globe as an eco-friendly and eff ective renewable power source. However, this technology often faces reliability problems due to structural vibration. This study proposes a smart semi-active vibration control system using Magnetorheological (MR) dampers where feedback controllers are optimized with nature-inspired algorithms. Proportional integral derivative (PID) and Proportional integral (PI) controllers are designed to achieve the optimal desired force and current input for MR the damper. PID control parameters are optimized using an Ant colony optimization (ACO) algorithm. The eff ectiveness of the ACO algorithm is validated by comparing its performance with Ziegler-Nichols (Z-N) and particle swarm optimization (PSO). The placement of the MR damper on the tower is also investigated to ensure structural balance and optimal desired force from the MR damper. The simulation results show that the proposed semi-active PID-ACO control strategy can signifi cantly reduce vibration on the wind turbine tower under diff erent frequencies (i.e., 67%, 73%, 79% and 34.4% at 2 Hz, 3 Hz, 4.6 Hz and 6 Hz, respectively) and amplitudes (i.e. 50%, 58% and 67% for 50 N, 80 N, and 100 N, respectively). In this study, the simulation model is validated with an experimental study in terms of natural frequency, mode shape and uncontrolled response at the 1st mode. The proposed PID-ACO control strategy and optimal MR damper position is also implemented on a lab-scaled wind turbine tower model. The results show that the vibration reduction rate is 66% and 73% in the experimental and simulation study, respectively, at the 1st mode.
基金Supported by National Natural Science Foundation of China (No.51108089,No.90715034 and No.90715032)National Natural Science Foundation of Fujian Province (No.2011J05128)
文摘The magnetorheological （MR） fluid damper-based semiactive control systems have received considerable attention for protecting structures against natural hazards such as strong earthquakes and high winds. In this paper, a novel modal controller using wavelet packet transform （WPT） is proposed for the vibration control of distributed structures. In the proposed control system, the WPT method is utilized to decompose the acceleration measurement and select the modes containing most of the WPT energy component as the dominant modes. Then, a modal controller is designed to control the dominant modes and the optimal active control force is solved. Finally, Clipped-optimal con- trol law is adopted to determine the voltage applied to each MR damper. A Kalman-filter observer, which estimates the full controlled modal states from local accelerometer feedbacks, is designed for rendering the controller to be more applicable to distributed structures with a large number of degrees of freedom. A numerical example of a stadium root structure installed with MRF-04K damper is presented. The effectiveness of the controller is evaluated under both Tianjin and E1 Centro earthquake excitations. The superior performance and adaptability of the controller for versatile loading conditions are demonstrated through the comparison with traditional truncated modal controller.
基金supported by the Natural Science Foundation of Jiangsu Province(No.BK20190438)the Natural Science Foundation of Jiangsu Province(No.BK20210321).
文摘A crawler system provides much larger ground contact,leading to excellent terrain adaptability.Due to its structural characteristics,high‐frequency vibration proportional to the vehicle speed is generated during the driving process.This is a result of the polygon and rolling effects between the track and the wheels.A field test of a tracked vehicle is performed to monitor movement signals of the chassis and a rocker arm.Their corresponding power spectral density distributions confirm the correctness of the frequency‐calculation equation.Then,a novel elastic track tensioning device with a damper is designed as a cushion between the idler and the chassis.Depending on its geometry,the equivalent damping coefficient for a dynamic model is evaluated.Subsequently,the damping is altered in response to different operating conditions by a hybrid damping fuzzy semiactive control system.The controller accounts for both chassis and track vibration.Based on the transfer matrix method for multibody systems,a dynamical model of the track system is developed.Control performances are evaluated using two numerical simulations of obstacle crossing and off‐road driving operations.Results indicate that the proposed semiactive tensioner is substantially better than the conventional one.This paper provides a novel feasible scheme for vibration reduction of tracked vehicles.
