The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and...The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and tensile properties are investigated.The results show that the microstructures of ZK60 magnesium alloy are refined and distribution uniformity of precipitations is observed after applying the middle frequency electromagnetic field.And the tensile properties of the billets produced by middle frequency electromagnetic field are increased.展开更多
In the process of preparation of semi-solid metal materials, a variety of factors would influence the preparing time and the morphology of non-dendritic microstructure. The aim of this work is using phase-field method...In the process of preparation of semi-solid metal materials, a variety of factors would influence the preparing time and the morphology of non-dendritic microstructure. The aim of this work is using phase-field method to simulate non-dendritic growth during preparation of AI-4Cu-Mg semi-solid alloy by electromagnetic stirring method （EMS method）. Several factors such as the disturbance intensity, anisotropy, the thickness of the interface and the ratio of diffusivity in solid and liquid were considered. It is shown that decreasing the thickness of the interface results in more circular outline of particles, and increasing the diffusivity in solid can reduce degree of microsegregation. The disturbance intensity in the model can be connected with current intensity of stator or magnetic induction density impressed. Simulation results show that the larger the disturbance intensity or magnetic induction density, the more globular morphology the original phase in the matrix.展开更多
Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes （SBDs） with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon （SIPOS） FP termination has been fabricated. The ...Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes （SBDs） with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon （SIPOS） FP termination has been fabricated. The relative dielectric con-stant of the SIPOS dielectric first used in 4H-SiC devices is 10.4, which is much higher than that of the SiO2 dielectric, leading to benefitting the performance of devices. The breakdown voltage of the fabricated SBD could reach 1200 V at leak-age current 20 μA, about 70% of the theoretical breakdown voltage. Meanwhile, both of the simulation and experimental results show that the length of the SIPOS FP termination is an important factor for structure design.展开更多
Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduce...Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary differential equations （ODEs） defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numerical example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.展开更多
We have experimentally determined the as-cast structures of semi-continuous casting 7075 aluminum alloy obtained in the pres-ence of dual-frequency electromagnetic field. Results suggest that the use of dual-frequency...We have experimentally determined the as-cast structures of semi-continuous casting 7075 aluminum alloy obtained in the pres-ence of dual-frequency electromagnetic field. Results suggest that the use of dual-frequency electromagnetic field during the semi-continuous casting process of 7075 aluminum alloy ingots reduces the thickness of the surface segregation layer, increases the height of the melt menis-cus, enhances the surface quality of the ingot, and changes the surface morphology of the melt pool. Moreover, low-frequency electromag-netic field was found to show the most obvious influence on improving the as-cast structure because of its high permeability in conductors.展开更多
Firstly, the new combined error model of cumulative geoid height influenced by four error sources, including the inter-satellite range-rate of an interferometric laser （K-band） ranging system, the orbital position a...Firstly, the new combined error model of cumulative geoid height influenced by four error sources, including the inter-satellite range-rate of an interferometric laser （K-band） ranging system, the orbital position and velocity of a global positioning system （GPS） receiver and non-conservative force of an accelerometer, is established from the perspectives of the power spectrum principle in physics using the semi-analytical approach. Secondly, the accuracy of the global gravitational field is accurately and rapidly estimated based on the combined error model; the cumulative geoid height error is 1.985× 10^-1 m at degree 120 based on GRACE Level 1B measured observation errors of the year 2007 published by the US Jet Propulsion Laboratory （JPL）, and the cumulative geoid height error is 5.825 × 10^-2 m at degree 360 using GRACE Follow-On orbital altitude 250 km and inter-satellite range 50 km. The matching relationship of accuracy indexes from GRACE Follow-On key payloads is brought forward, and the dependability of the combined error model is validated. Finally, the feasibility of high-accuracy and high-resolution global gravitational field estimation from GRACE Follow-On is demonstrated based on different satellite orbital altitudes.展开更多
A vertical carbon nanotube field-effect transistor(CNTFET) based on silicon(Si) substrate has been proposed and simulated using a semi-classical theory. A single-walled carbon nanotube(SWNT) and an n-type Si nanowire ...A vertical carbon nanotube field-effect transistor(CNTFET) based on silicon(Si) substrate has been proposed and simulated using a semi-classical theory. A single-walled carbon nanotube(SWNT) and an n-type Si nanowire in series construct the channel of the transistor. The CNTFET presents ambipolar characteristics at positive drain voltage(Vd) and n-type characteristics at negative Vd. The current is significantly influenced by the doping level of n-Si and the SWNT band gap. The n-branch current of the ambipolar characteristics increases with increasing doping level of the n-Si while the p-branch current decreases. The SWNT band gap has the same influence on the p-branch current at a positive Vd and n-type characteristics at negative Vd. The lower the SWNT band gap, the higher the current. However, it has no impact on the n-branch current in the ambipolar characteristics. Thick oxide is found to significantly degrade the current and the subthreshold slope of the CNTFETs.展开更多
Dealing with the regional land surfaces heat fluxes over inhomogeneous land surfaces in arid and semi-arid areas is an important but not an easy issue. In this study, one parameterization method based on satellite rem...Dealing with the regional land surfaces heat fluxes over inhomogeneous land surfaces in arid and semi-arid areas is an important but not an easy issue. In this study, one parameterization method based on satellite remote sensing and field observations is proposed and tested for deriving the regional land surface heat fluxes over inhomogeneous landscapes. As a case study, the method is applied to the Dunhuang experimental area and the HEIFE (Heihe River Field Experiment, 1988-1994) area. The Dunhuang area is selected as a basic experimental area for the Chinese National Key Programme for Developing Basic Sciences: Research on the Formation Mechanism and Prediction Theory of Severe Climate Disaster in China (G1998040900, 1999-2003). The four scenes of Landsat TM data used in this study are 3 June 2000, 22 August 2000, and 29 January 2001 for the Dunhuang area and 9 July 1991 for the HEIFE area. The regional distributions of land surface variables, vegetation variables, and heat fluxes over inhomogeneous landscapes in arid and semi-arid areas are obtained in this study.展开更多
The modeling technique of hydrodynamic torque converter flow passage was investigated. The semi-automatic modeling technique of torque converter flow passage was proposed. The flow passage model of each converter whee...The modeling technique of hydrodynamic torque converter flow passage was investigated. The semi-automatic modeling technique of torque converter flow passage was proposed. The flow passage model of each converter wheel is considered as a revolution entity sliced by two curved surfaces. In order to generate the revolution entity, a new approximation method, condition optimum arc approximation, was proposed. The method was used to approximate the meridional streamlines of the inner and outer wall. As a result, the three-dimensional revolution entity can be conveniently generated. In order to create slice surfaces, the central stream surface of flow passage was approximated with a quadric surface. The normal vector of the quadric surface and the thickness/thickness-function of bade were used to calculate the discrete point coordinates of blade surfaces. Via the rotation transformation to the coordinates, the discrete point coordinates of slice surfaces were obtained. A parameterized program code used for the hydrodynamic torque converter design and semi-automatic modeling was developed. Modeling errors were calculated and analyzed. The flow passage model was generated in several minutes with the help of the program code, Auto CAD and Solidworks software. Finally, the model was inputted into Gambit, and the pre-processing task used for the numerical simulation of torque converter flow field was successfully completed. The investigation results show that the semi-automatic modeling not only can ensure the accuracy of modeling, but also librates the research and design workers of torque converter from the time-consuming modeling work, which paves the way for the numerical simulation of the complex flow field of the hydrodynamic torque converter.展开更多
The embedded water pipe system is often used as a standard cooling technique during the construction of large-scale mass concrete hydrostructures. The prediction of the temperature distribution considering the cooling...The embedded water pipe system is often used as a standard cooling technique during the construction of large-scale mass concrete hydrostructures. The prediction of the temperature distribution considering the cooling effects of embedded pipes plays an essential role in the design of the structure and its cooling system. In this study, the singular boundary method, a semi-analytical meshless technique, was employed to analyze the temperature distribution. A numerical algorithm solved the transient temperature field with consideration of the effects of cooling pipe specification, isolation of heat of hydration, and ambient temperature. Numerical results are verified through comparison with those of the finite element method, demonstrating that the proposed approach is accurate in the simulation of the thermal field in concrete structures with a water cooling pipe.展开更多
The as-cast structures of semi-continuous casting aluminum alloy under dual-frequency electromagnetic field were experimental investigated.The results showed that the electromagnetic fields with different frequency ha...The as-cast structures of semi-continuous casting aluminum alloy under dual-frequency electromagnetic field were experimental investigated.The results showed that the electromagnetic fields with different frequency have different function for improving the cast structure of aluminum alloy casting.Imposing medium frequency electromagnetic field can change the surface morphology of melt pool in the casting process,increase the height of melt meniscus,improve the ingot's surface quality,and reduce the thickness of surface segregation.The low frequency electromagnetic field is most obvious to as-cast structure improvement effect because of its high permeability in conductance material.Imposing low-frequency electromagnetic field can change flow pattern and temperature field in the melt,strengthen the heat transfer and mass transfer in the melt,decrease the depth of the sttmp and reduce the temperature gradient.Thus,the as-cast structures are greatly refined,which can lead to the fine equiaxed as-cast structures throughout the cross-section of the ingot.展开更多
A theoretical analysis on the electric double layer formed near the surface of an infinite cylinder with an elliptical cross section and a prescribed electric potential in an ionic conductor was performed using the li...A theoretical analysis on the electric double layer formed near the surface of an infinite cylinder with an elliptical cross section and a prescribed electric potential in an ionic conductor was performed using the linearized Gouy–Chapman theory. A semi-analytical solution in terms of the Mathieu functions was obtained. The distributions of the electric potential, cations, anions, and electric field were calculated. The effects of various physical and geometric parameters were examined. The fields vary rapidly near the elliptical boundary and are nearly uniform at far field. Electric field concentrations were found at the ends of the semi-major and semi-minor axes of the ellipse. These concentrations are sensitive to the physical and geometric parameters.展开更多
For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracke...For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracket and calculate the initial stress condition of new main bracket, the structural stress monitoring of eight key spots is carried out, and then the calibrated finite element model is established according to the field monitoring results. Before cutting the main bracket and all associated structures, eight rectangular rosettes were installed, and a tailored cutting scheme was proposed to release the initial stress, in which the main bracket and associated column and pontoon plates were partly cut. During the cutting procedure, the strains of the monitoring spots were measured, and then the structural stress of the monitored spots were obtained. The stress variation characteristics at different spots during the initial cutting operation were shown and the initial stress condition of the monitored spots was figured out. The loading and support conditions of the semi-submersible platform were calibrated based on the measured initial stress condition, which made the finite element model more credible. The stress condition with the main bracket and associated structures being entirely cut out is analyzed by the Finite Element Method (FEM), which demonstrates the cutting operation to be safe and feasible. In addition, the calibrated finite element model can be used to calculate the initial stress condition of the new main bracket, which will be very helpful for the long-term stress monitoring on the main bracket.展开更多
基金Funded by the National Natural Science Foundation of China (NSFC)(No.50475157)the Key Fund of NSFC (No.50234022)the Key Project of Ministry of Education of China (No.105052)
文摘The semi-continuous casting of ZK60 magnesium alloy under different middle frequency electromagnetic field conditions was examined.Effects of middle frequency electromagnetic field on microstructure,precipitations and tensile properties are investigated.The results show that the microstructures of ZK60 magnesium alloy are refined and distribution uniformity of precipitations is observed after applying the middle frequency electromagnetic field.And the tensile properties of the billets produced by middle frequency electromagnetic field are increased.
文摘In the process of preparation of semi-solid metal materials, a variety of factors would influence the preparing time and the morphology of non-dendritic microstructure. The aim of this work is using phase-field method to simulate non-dendritic growth during preparation of AI-4Cu-Mg semi-solid alloy by electromagnetic stirring method （EMS method）. Several factors such as the disturbance intensity, anisotropy, the thickness of the interface and the ratio of diffusivity in solid and liquid were considered. It is shown that decreasing the thickness of the interface results in more circular outline of particles, and increasing the diffusivity in solid can reduce degree of microsegregation. The disturbance intensity in the model can be connected with current intensity of stator or magnetic induction density impressed. Simulation results show that the larger the disturbance intensity or magnetic induction density, the more globular morphology the original phase in the matrix.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61234006 and 61274079)the Key Specific Projects of Ministry of Education of China(Grant No.625010101)the Science Project of State Grid,China(Grant No.SGRI-WD-71-13-004)
文摘Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes （SBDs） with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon （SIPOS） FP termination has been fabricated. The relative dielectric con-stant of the SIPOS dielectric first used in 4H-SiC devices is 10.4, which is much higher than that of the SiO2 dielectric, leading to benefitting the performance of devices. The breakdown voltage of the fabricated SBD could reach 1200 V at leak-age current 20 μA, about 70% of the theoretical breakdown voltage. Meanwhile, both of the simulation and experimental results show that the length of the SIPOS FP termination is an important factor for structure design.
基金National Natural Science Foundation of China (50574097 90305023)
文摘Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary differential equations （ODEs） defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numerical example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.
基金financially supported by the National Natural Science Foundation of China(No.51004036)the Fundamental Research Funds for the Central Universities(No.N120309002)
文摘We have experimentally determined the as-cast structures of semi-continuous casting 7075 aluminum alloy obtained in the pres-ence of dual-frequency electromagnetic field. Results suggest that the use of dual-frequency electromagnetic field during the semi-continuous casting process of 7075 aluminum alloy ingots reduces the thickness of the surface segregation layer, increases the height of the melt menis-cus, enhances the surface quality of the ingot, and changes the surface morphology of the melt pool. Moreover, low-frequency electromag-netic field was found to show the most obvious influence on improving the as-cast structure because of its high permeability in conductors.
基金supported by the National Natural Science Foundation of China (Grant No 40674038)the Funds of the Chinese Academy of Sciences for Key Topics in Innovation Engineering (Grant Nos KZCX2-YW-143 and KZCX2-YW-202)+1 种基金the National High Technology Research and Development Program of China (863) (Grant Nos 2009AA12Z138 and 2006AA09Z153)the Grant-in-Aid for Scientific Research of Japan (Grant No B19340129)
文摘Firstly, the new combined error model of cumulative geoid height influenced by four error sources, including the inter-satellite range-rate of an interferometric laser （K-band） ranging system, the orbital position and velocity of a global positioning system （GPS） receiver and non-conservative force of an accelerometer, is established from the perspectives of the power spectrum principle in physics using the semi-analytical approach. Secondly, the accuracy of the global gravitational field is accurately and rapidly estimated based on the combined error model; the cumulative geoid height error is 1.985× 10^-1 m at degree 120 based on GRACE Level 1B measured observation errors of the year 2007 published by the US Jet Propulsion Laboratory （JPL）, and the cumulative geoid height error is 5.825 × 10^-2 m at degree 360 using GRACE Follow-On orbital altitude 250 km and inter-satellite range 50 km. The matching relationship of accuracy indexes from GRACE Follow-On key payloads is brought forward, and the dependability of the combined error model is validated. Finally, the feasibility of high-accuracy and high-resolution global gravitational field estimation from GRACE Follow-On is demonstrated based on different satellite orbital altitudes.
基金support by National High Technology Research and Development Program of China (No. 2011AA050504)the analysis supports from Instrumental Analysis Center of SJTU
文摘A vertical carbon nanotube field-effect transistor(CNTFET) based on silicon(Si) substrate has been proposed and simulated using a semi-classical theory. A single-walled carbon nanotube(SWNT) and an n-type Si nanowire in series construct the channel of the transistor. The CNTFET presents ambipolar characteristics at positive drain voltage(Vd) and n-type characteristics at negative Vd. The current is significantly influenced by the doping level of n-Si and the SWNT band gap. The n-branch current of the ambipolar characteristics increases with increasing doping level of the n-Si while the p-branch current decreases. The SWNT band gap has the same influence on the p-branch current at a positive Vd and n-type characteristics at negative Vd. The lower the SWNT band gap, the higher the current. However, it has no impact on the n-branch current in the ambipolar characteristics. Thick oxide is found to significantly degrade the current and the subthreshold slope of the CNTFETs.
文摘Dealing with the regional land surfaces heat fluxes over inhomogeneous land surfaces in arid and semi-arid areas is an important but not an easy issue. In this study, one parameterization method based on satellite remote sensing and field observations is proposed and tested for deriving the regional land surface heat fluxes over inhomogeneous landscapes. As a case study, the method is applied to the Dunhuang experimental area and the HEIFE (Heihe River Field Experiment, 1988-1994) area. The Dunhuang area is selected as a basic experimental area for the Chinese National Key Programme for Developing Basic Sciences: Research on the Formation Mechanism and Prediction Theory of Severe Climate Disaster in China (G1998040900, 1999-2003). The four scenes of Landsat TM data used in this study are 3 June 2000, 22 August 2000, and 29 January 2001 for the Dunhuang area and 9 July 1991 for the HEIFE area. The regional distributions of land surface variables, vegetation variables, and heat fluxes over inhomogeneous landscapes in arid and semi-arid areas are obtained in this study.
文摘The modeling technique of hydrodynamic torque converter flow passage was investigated. The semi-automatic modeling technique of torque converter flow passage was proposed. The flow passage model of each converter wheel is considered as a revolution entity sliced by two curved surfaces. In order to generate the revolution entity, a new approximation method, condition optimum arc approximation, was proposed. The method was used to approximate the meridional streamlines of the inner and outer wall. As a result, the three-dimensional revolution entity can be conveniently generated. In order to create slice surfaces, the central stream surface of flow passage was approximated with a quadric surface. The normal vector of the quadric surface and the thickness/thickness-function of bade were used to calculate the discrete point coordinates of blade surfaces. Via the rotation transformation to the coordinates, the discrete point coordinates of slice surfaces were obtained. A parameterized program code used for the hydrodynamic torque converter design and semi-automatic modeling was developed. Modeling errors were calculated and analyzed. The flow passage model was generated in several minutes with the help of the program code, Auto CAD and Solidworks software. Finally, the model was inputted into Gambit, and the pre-processing task used for the numerical simulation of torque converter flow field was successfully completed. The investigation results show that the semi-automatic modeling not only can ensure the accuracy of modeling, but also librates the research and design workers of torque converter from the time-consuming modeling work, which paves the way for the numerical simulation of the complex flow field of the hydrodynamic torque converter.
基金supported by the National Natural Science Foundation of China(Grants No.11572111 and 11372097)the 111 Project(Grant No.B12122)
文摘The embedded water pipe system is often used as a standard cooling technique during the construction of large-scale mass concrete hydrostructures. The prediction of the temperature distribution considering the cooling effects of embedded pipes plays an essential role in the design of the structure and its cooling system. In this study, the singular boundary method, a semi-analytical meshless technique, was employed to analyze the temperature distribution. A numerical algorithm solved the transient temperature field with consideration of the effects of cooling pipe specification, isolation of heat of hydration, and ambient temperature. Numerical results are verified through comparison with those of the finite element method, demonstrating that the proposed approach is accurate in the simulation of the thermal field in concrete structures with a water cooling pipe.
基金Item Sponsored by National Natural Science Foundation of China[No.51004036]
文摘The as-cast structures of semi-continuous casting aluminum alloy under dual-frequency electromagnetic field were experimental investigated.The results showed that the electromagnetic fields with different frequency have different function for improving the cast structure of aluminum alloy casting.Imposing medium frequency electromagnetic field can change the surface morphology of melt pool in the casting process,increase the height of melt meniscus,improve the ingot's surface quality,and reduce the thickness of surface segregation.The low frequency electromagnetic field is most obvious to as-cast structure improvement effect because of its high permeability in conductance material.Imposing low-frequency electromagnetic field can change flow pattern and temperature field in the melt,strengthen the heat transfer and mass transfer in the melt,decrease the depth of the sttmp and reduce the temperature gradient.Thus,the as-cast structures are greatly refined,which can lead to the fine equiaxed as-cast structures throughout the cross-section of the ingot.
基金supported by the National Natural Science Foundation of China (Grants 11502108 and 11232007)the Program for New Century Excellent Talents in Universities (Grant NCET-12-0625)+2 种基金the Natural Science Foundation of Jiangsu Province (Grant BK20140037)the Fundamental Research Funds for Central Universities (Grant NE2013101)Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘A theoretical analysis on the electric double layer formed near the surface of an infinite cylinder with an elliptical cross section and a prescribed electric potential in an ionic conductor was performed using the linearized Gouy–Chapman theory. A semi-analytical solution in terms of the Mathieu functions was obtained. The distributions of the electric potential, cations, anions, and electric field were calculated. The effects of various physical and geometric parameters were examined. The fields vary rapidly near the elliptical boundary and are nearly uniform at far field. Electric field concentrations were found at the ends of the semi-major and semi-minor axes of the ellipse. These concentrations are sensitive to the physical and geometric parameters.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51709170 and 51979167)the Ministry of Industry and Information Technology of China(Project No.[2016] 546)+1 种基金the Shanghai Sailing Program(Grant No.17YF1409700)the Open Foundation of State Key Laboratory of Ocean Engineering(Grant No.1716)
文摘For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracket and calculate the initial stress condition of new main bracket, the structural stress monitoring of eight key spots is carried out, and then the calibrated finite element model is established according to the field monitoring results. Before cutting the main bracket and all associated structures, eight rectangular rosettes were installed, and a tailored cutting scheme was proposed to release the initial stress, in which the main bracket and associated column and pontoon plates were partly cut. During the cutting procedure, the strains of the monitoring spots were measured, and then the structural stress of the monitored spots were obtained. The stress variation characteristics at different spots during the initial cutting operation were shown and the initial stress condition of the monitored spots was figured out. The loading and support conditions of the semi-submersible platform were calibrated based on the measured initial stress condition, which made the finite element model more credible. The stress condition with the main bracket and associated structures being entirely cut out is analyzed by the Finite Element Method (FEM), which demonstrates the cutting operation to be safe and feasible. In addition, the calibrated finite element model can be used to calculate the initial stress condition of the new main bracket, which will be very helpful for the long-term stress monitoring on the main bracket.
