Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivati...Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivation defects.However,the stability of the SAM molecules,the stability of the molecular anchoring conformation,and the impact on the stability of subsequent PSCs have not been clearly elucidated.In this review,we systematically discussed the intrinsic connection between the molecular conformation(including anchoring groups,spacer groups,and terminal groups)and the stability of SAMs.Sequentially,the research progress of SAMs as HSLs in improving the stability of PSCs is summarized,including photostability,thermal stability,ion migration,and residual stress.Finally,we look forward to the shortcomings and possible challenges of using SAMs as HSLs for inverted PSCs.展开更多
Self-assembled monolayers(SAMs)have been commonly employed as hole-selective layers(HSLs)in inverted(p-i-n)perovskite solar cells(PSCs),and typically only a single-component SAM is applied,which plays limited role in ...Self-assembled monolayers(SAMs)have been commonly employed as hole-selective layers(HSLs)in inverted(p-i-n)perovskite solar cells(PSCs),and typically only a single-component SAM is applied,which plays limited role in selective hole transport.Herein,we synthesize a novel SAM,(4-(3,11-dibro mo-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid(Br-4PADBC),and apply it as a complementary component to the commonly used[2-(3,6-dimeth oxy-9H-carbazol-9-yl)ethyl]phosphonic acid(MeO-2PACz)SAM,accomplishing boosted hole transport in inverted PSCs.A series of characterizations and theoretical calculations are employed to unravel the roles of each components within the binary SAM(bi-SAM).The involvements of the non-planar dibenzo[c,g]carbazole unit and electron-withdrawing Br atoms induce larger dipole moment of Br-4PADBC than MeO-2PACz,resulting in much deeper work function of ITO and consequently improved alignment with the valence band energy level of perovskite.Besides,the introduced Br atoms improve the quality of perovskite crystals and help passivate defects of perovskite.On the other hand,the existence of the conventional MeO-2PACz SAM ensures the considerable conductivity of the bi-SAM and thus efficient hole extraction from the perovskite layer.As a result,inverted PSC devices based on bi-SAM HSL deliver a decent power conversion efficiency(PCE)of 24.52%as well as dramatically improved thermal and operational stabilities.展开更多
Self-assembled monolayers(SAMs)are widely used as hole transport materials in inverted perovskite solar cells,offering low parasitic absorption and suitability for semitransparent and tandem solar cells.While SAMs hav...Self-assembled monolayers(SAMs)are widely used as hole transport materials in inverted perovskite solar cells,offering low parasitic absorption and suitability for semitransparent and tandem solar cells.While SAMs have shown to be promising in small-area devices(≤1 cm^(2)),their application in larger areas has been limited by a lack of knowledge regarding alternative deposition methods beyond the common spin-coating approach.Here,we compare spin-coating and upscalable methods such as thermal evaporation and spray-coating for[2-(9H-carbazol-9-yl)ethyl]phosphonic acid(2PACz),one of the most common carbazole-based SAMs.The impact of these deposition methods on the device performance is investigated,revealing that the spray-coating technique yields higher device performance.Furthermore,our work provides guidelines for the deposition of SAM materials for the fabrication of perovskite solar modules.In addition,we provide an extensive characterization of 2PACz films focusing on thermal evaporation and spray-coating methods,which allow for thicker 2PACz deposition.It is found that the optimal 2PACz deposition conditions corresponding to the highest device performances do not always correlate with the monolayer characteristics.展开更多
Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbati...Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbation of 30 mV （peak to-peak） with the frequency ranging from 1 Hz to 1 MHz at zero bias. The contributions from dithiol SAMs and solvent interlayers were separated due to their different behaviors at ac impedance. The peak position in the loss spectra （the plot; of tgδ vs. frequency） moves to low frequcney with the incrcase of chain length of dithiols. Using a correlation of peak position with the chain length, the active energies of 23-39 meV for dithiol SAMs of C6-C10 under an ac electric field were derived,展开更多
A mixed self-assembled monolayers （SAMs） of thioctic acid （T-COOH） and thioctic acid amide （T-NH2） were used to immobilize tyrosinase for fabricating biosensor. The results showed that the mixed SAMs prepared fr...A mixed self-assembled monolayers （SAMs） of thioctic acid （T-COOH） and thioctic acid amide （T-NH2） were used to immobilize tyrosinase for fabricating biosensor. The results showed that the mixed SAMs prepared from solution at the ratio of 1：4 provided an excellent microenvironment for enzymatic reaction between tyrosinase and substrate. The biosensor exhibited a fast response and high sensitivity for sensing substrate.展开更多
SrTiO3 thin film was successfully prepared on the functionalized organic self-assembled monolayers（SAMs） by the Liquid Phase Deposition（LPD） method.The as-prepared samples were characterized by X-ray diffraction（...SrTiO3 thin film was successfully prepared on the functionalized organic self-assembled monolayers（SAMs） by the Liquid Phase Deposition（LPD） method.The as-prepared samples were characterized by X-ray diffraction（XRD）,atomic force microscope（AFM）,scanning electron microscopy（SEM） and metallographic microscope.Measurement of contact angle showed that the hydrophobe substrate was changed into hydrophile by UV irradiation.AFM photographs of octadecyl-trichloro-silane self-assembled monolayer（OTS-SAM） surface approved that UV irradiation did change the morphology of OTS monolayer and provided evidence for the conversion of hydrophilic characteristic.Photographs of Metallographic Microscope showed that OTS-SAM had an active effect on the deposition of SrTiO3 thin film.XRD and SEM indicated that the thin film was of pure cubic phase SrTiO3 and composed of nanosized grains with a size in the range of 100-500 nm.The formation mechanism of the SrTiO3 film was proposed.展开更多
Based on MEMS technology,immunosensor with an'Au,Pt,Pt'three-microelectrode system enclosed in a SU-8 micro pool was fabricated.Employing SAMs technique,the Au electrode was modified by cysteamine(Cys)to assem...Based on MEMS technology,immunosensor with an'Au,Pt,Pt'three-microelectrode system enclosed in a SU-8 micro pool was fabricated.Employing SAMs technique,the Au electrode was modified by cysteamine(Cys)to assemble gold nanopanicles(nanogold)layer,subsequently,a layer of protein G(PG)was immobilized on nanogold layer to further capture antibody orientedly.Compared with the immunosensors using bulky gold electrode and direct PG binding to electrode immobilization technique for antibody,it has attractive advantages,such as miniaturization,good compatibility,broad linear range for human immunoglobulin(HIgG)and easy to be designed into array.展开更多
Impedance titration was used to determine the surface dissociation characteristics of short-chain carboxyl mercaptan self-assembled monolayers （SAMs）. Based on the change of the cyclic voltammetric peak current and ...Impedance titration was used to determine the surface dissociation characteristics of short-chain carboxyl mercaptan self-assembled monolayers （SAMs）. Based on the change of the cyclic voltammetric peak current and the charge-transfer resistance, which was related to pH value of the solution, the surface pKa of mercaptoacetic acid（MA）, 3-mercaptopropionic acid（MPA） and ω-mercaptohexanic acid（MHA） self-assembled membranes, with ionic strength being 0.1 mol/L, were determined to be 5.20, 4.80, 7.40, respectively. In addition, factors such as time needed for assembling, structure of monolayers and ionic strength, which effected the surface pKa, were studied as well. Such surface pKa shifts were sufficiently explained by interactions between interfacial molecules and hydrophobicity.展开更多
The self-assembled monolayers （SAMs） of imidazoline （IM） on the iron surface were characterized by scanning electron microscope （SEM） and scanning electrochemical microscopy （SECM）. The results showed that SAM...The self-assembled monolayers （SAMs） of imidazoline （IM） on the iron surface were characterized by scanning electron microscope （SEM） and scanning electrochemical microscopy （SECM）. The results showed that SAMs were an effective inhibition film for iron.展开更多
The intermolecular interaction in an azobenzene self-assembled monolayers (SAMs) on gold electrode was investigated by controlling the assembling time and using mixed self-assembled techniques, and the variation of ap...The intermolecular interaction in an azobenzene self-assembled monolayers (SAMs) on gold electrode was investigated by controlling the assembling time and using mixed self-assembled techniques, and the variation of apparent electron transfer rate constant (k(s)) of azobenzene SAMs with different molecular packing density is reported.展开更多
A new method for preparing chemically modified gold electrode by anchoring thionine to self-assembled bi - (2 -aminoethyl) -aminodithiocarboxyl acid(BANTC) monolayers through coordination with Cu2+ is described. This...A new method for preparing chemically modified gold electrode by anchoring thionine to self-assembled bi - (2 -aminoethyl) -aminodithiocarboxyl acid(BANTC) monolayers through coordination with Cu2+ is described. This thionine modified electrode exhibits two-new redox couples.Two protons were involved in the electrochemical process undergone by the couple I in the pH range of 5.0-10.0. The apparent surface electron transfer rate constant is about 0.050s-1.展开更多
Oligo（ethylene glycol） （-OEG） and amino （-NH2） mixed self-assembled monolayers （SAMs） were employed as model substrates to investigate the effect of charge density on the fate of mesenchymal stem cells （MSCs...Oligo（ethylene glycol） （-OEG） and amino （-NH2） mixed self-assembled monolayers （SAMs） were employed as model substrates to investigate the effect of charge density on the fate of mesenchymal stem cells （MSCs） and osteopontin （OPN） adsorption. We found that all surfaces presenting -NH2 groups favored cell responses regardless of the surface charge. Meanwhile, OPN adsorption could remain stable on the mixed SAMs over a certain range of charge densities. Our work provides some insights into cell responses and protein adsorption to surface charge.展开更多
The self-assembled monolayers （SAMs） of 1 tetradecylphosphonic acid （TDPA） formed on the 430 stain-less steel （SS430）were studied. Surface and morphological characterizations were studied by Fourier transformed ...The self-assembled monolayers （SAMs） of 1 tetradecylphosphonic acid （TDPA） formed on the 430 stain-less steel （SS430）were studied. Surface and morphological characterizations were studied by Fourier transformed in-frared spectroscopy （FTIR）, water contact angle measurement and atomic force microscopy （AFM）. And the elec-trochemical study on the corrosion inhihition of the SAMs was performed by polarization curve and electrochemical impedance spectroscopy （E1S） for evaluating the corrosion protection of the SAMs. The results show that TDPA was able to form a film spontaneously on the SS430 surface and the hydrophobic SAMs could protect SS430 from corrosion effectively. In addition, the oxide surface formed by the heat pretreatment could accelerate the rate of ad-sorption, but had little effect on improving the inhibition efficiency.展开更多
A newly synthesized reagent 2-amino-5-mercapto-[1, 3, 4]triazole (MATZ) has been usedto fabricate self-assembled monolayers (SAMs) on gold electrode for the first time. The SAMselectrode was characterized by electroch...A newly synthesized reagent 2-amino-5-mercapto-[1, 3, 4]triazole (MATZ) has been usedto fabricate self-assembled monolayers (SAMs) on gold electrode for the first time. The SAMselectrode was characterized by electrochemical methods and scanning electronic microscopy (SEM),the SAMs electrode can be used to determinate dopamine (DA) and uric acid (UA) simultaneouslywith a detection limit of 8×10-7 mol/L for DA and 1×10-6 mol/L for UA respectively. The SAMscan also be used to detect the contents of DA and UA in synthetic urine sample with satisfactoryresults.展开更多
The electrochemical quartz crystal microbalance (EQCM) is used to investigate the characteristics of the thiolated self-assembled monolayer(SAM) on gold surface.A 5MHz QCM element serves as both the mass-sensitive sen...The electrochemical quartz crystal microbalance (EQCM) is used to investigate the characteristics of the thiolated self-assembled monolayer(SAM) on gold surface.A 5MHz QCM element serves as both the mass-sensitive sensor and the working electrode of the electrochemical system.The 6-mecapto-1-hexanol and and the 16-mer oligonucleotide with a mercaptohexyl group at the 5'-phosphate end are utilized to form the SAM on the gold electrode.The frequency response of the QCM during cyclic voltammetry (CV) scanning and cbronoamperometry are recorded together with the electrochemical current.The experimental results indicates that the frequency response is more sensitive to the surface coverage.Therefore,the response of the EQCM reveals more details of the SAM on gold electrode.It is especially useful for analysing the immobilization quality,such as probe orientation and coverage,of the SAM.展开更多
Self-assembled monolayers（SAMs） of thiol-derivatized porphyrin molecules on Au substrate have attracted extensively interest for use in sensing,optoelectronic devices and molecular electronics.In this paper,tetra-[p...Self-assembled monolayers（SAMs） of thiol-derivatized porphyrin molecules on Au substrate have attracted extensively interest for use in sensing,optoelectronic devices and molecular electronics.In this paper,tetra-[p-（3-mercaptopropyloxy）-phenyl]porphyrin was synthesized and self-assembled with thiol on Au substrate for porphyrin SAMs（PPS 4）.The electrochemical results demonstrated that PPS 4 could form excellent SAMs on gold surface.Self-assembled nanojunctions of PPS 4 were fabricated by using gold nanogap electrodes（gap width：ca.100 nm）.With the light on/off,the nanojunctions showed current high/low as nanometer scaled photo switch.展开更多
Self-assembled monolayers (SAMs) are ordered organic films formed by adsorption of an active organic coating on a solid surface. Their formation provides an alternative, highly innovative, to current traditional chemi...Self-assembled monolayers (SAMs) are ordered organic films formed by adsorption of an active organic coating on a solid surface. Their formation provides an alternative, highly innovative, to current traditional chemical treatments of the titanium surfaces. For this reason the structural phases, the formation and the growth of SAMs is described from a surface science point of view. Particulars are given to SAMs on titanium concerning surface morphology, chemical composition and affinity of specific head group for Ti surfaces (silanes, siloxane, phosphonates and phosphates). Preparation, coating methodologies, limitations and techniques used for the characterization of SAMs are reported. For their physicochemical characteristics and micro-nano scale features some perspectives of using SAMs in biomedical application are outlined.展开更多
Block copolymer lithography is emerging as one of the leading technologies for patteming nanoscale dense features. In almost all potential applications of this technology, control over the orientation of cylindrical a...Block copolymer lithography is emerging as one of the leading technologies for patteming nanoscale dense features. In almost all potential applications of this technology, control over the orientation of cylindrical and lamellar domains is required for pattern transfer from the block copolymer film. This review highlights the state-of-art development of brushes to modify the substrates to control the assembly behaviors of block copolymers in films. Selected important contributions to the development of self-assembled monolayers, polymer brushes and mats, and chemically patterned brushes are discussed.展开更多
Silane coupling regent （3-mercaptopropyl trimethoxysilane （MPTS）） was prepared on the single-crystal silicon substrate to form 2-dimensional self-assembled monolayers （SAMs）. The growth behavior of SAMs formed f...Silane coupling regent （3-mercaptopropyl trimethoxysilane （MPTS）） was prepared on the single-crystal silicon substrate to form 2-dimensional self-assembled monolayers （SAMs）. The growth behavior of SAMs formed from 3-MPTS was investigated using atomic force microscopy （AFM）, contact angle measurements, ellipsometry, and X-ray photoelectron spectroscopy （XPS）. The formation behavior of MPTS SAMs was investigated by a series of AFM images and the roughness of MPTS SAMs on silicon substrates with the assembling time from 1 min to 24 h. The water contact angle measurements indicated the growth behavior of MPTS that correlated with the AFM measurements at different immersion times, too. The chemical states of the typical elements in the MPTS SAMs were analyzed using X-ray photoelectron spectroscopy. The results show that MPTS is self-assembled on the substrate.展开更多
A novel hydrogen peroxide biosensor has been fabricated based on covalently linked horseradish peroxidase （HRP） onto L- glutathione self-assembled monolayers （SAMs）. The SAMs-based electrode was characterized by e...A novel hydrogen peroxide biosensor has been fabricated based on covalently linked horseradish peroxidase （HRP） onto L- glutathione self-assembled monolayers （SAMs）. The SAMs-based electrode was characterized by electrochemical methods, and direct electrochemistry of HRP can be achieved with formal potential of-0.242 V （vs. saturated Ag/AgCl） in pH 7 phosphate buffer solution （PBS）, the redox peak current is linear to scan rate and rate constant can be calculated to be 0.042 s^-1. The HRP-SAMs- based biosensors show its better electrocatalysis to hydrogen peroxide in the concentration range of 1 × 10^-6 mol/L to 1.2 × 10^-3 mol/L with a detection limit of 4 × 10^-7 mol/L. The apparent Michealis-Menten constant is 3.12 mmol/L. The biosensor can effectively eliminate the interferences of dopamine, ascorbic acid, uric acid, catechol and p-acetaminophen.展开更多
基金supported by the Natural Science Foundation of China(22425903,U24A20568,61705102,62288102,22409091,22409090 and 62205142)the National Key R&D Program of China(2023YFB4204500)the Jiangsu Provincial Departments of Science and Technology(BE2022023,BK20220010,BZ2023060,BK20240561,and BK20240562)。
文摘Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivation defects.However,the stability of the SAM molecules,the stability of the molecular anchoring conformation,and the impact on the stability of subsequent PSCs have not been clearly elucidated.In this review,we systematically discussed the intrinsic connection between the molecular conformation(including anchoring groups,spacer groups,and terminal groups)and the stability of SAMs.Sequentially,the research progress of SAMs as HSLs in improving the stability of PSCs is summarized,including photostability,thermal stability,ion migration,and residual stress.Finally,we look forward to the shortcomings and possible challenges of using SAMs as HSLs for inverted PSCs.
基金the National Natural Science Foundation of China(51925206,U1932214,52302052)the National Natural Science Foundation of China(52322318)+6 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0450301)the Fundamental Research Funds for the Central Universities(WK2060000051,20720220009)the National Key Research and Development Program of China(No.2023YFB3809700)the Innovation and Technology Fund(GHP/100/20SZ,GHP/102/20GD,MRP/040/21X,ITS/147/22FP)the Research Grants Council of Hong Kong Grant(N_City U102/23,C4005-22Y,C1055-23G,11306521)the Green Tech Fund(GTF202020164)the Science Technology and Innovation Committee of Shenzhen Municipality(SGDX20210823104002015,JCYJ20220818101018038)。
文摘Self-assembled monolayers(SAMs)have been commonly employed as hole-selective layers(HSLs)in inverted(p-i-n)perovskite solar cells(PSCs),and typically only a single-component SAM is applied,which plays limited role in selective hole transport.Herein,we synthesize a novel SAM,(4-(3,11-dibro mo-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid(Br-4PADBC),and apply it as a complementary component to the commonly used[2-(3,6-dimeth oxy-9H-carbazol-9-yl)ethyl]phosphonic acid(MeO-2PACz)SAM,accomplishing boosted hole transport in inverted PSCs.A series of characterizations and theoretical calculations are employed to unravel the roles of each components within the binary SAM(bi-SAM).The involvements of the non-planar dibenzo[c,g]carbazole unit and electron-withdrawing Br atoms induce larger dipole moment of Br-4PADBC than MeO-2PACz,resulting in much deeper work function of ITO and consequently improved alignment with the valence band energy level of perovskite.Besides,the introduced Br atoms improve the quality of perovskite crystals and help passivate defects of perovskite.On the other hand,the existence of the conventional MeO-2PACz SAM ensures the considerable conductivity of the bi-SAM and thus efficient hole extraction from the perovskite layer.As a result,inverted PSC devices based on bi-SAM HSL deliver a decent power conversion efficiency(PCE)of 24.52%as well as dramatically improved thermal and operational stabilities.
基金supported by funding from the Energy Materials and Surface Sciences Unit of the Okinawa Institute of Science and Technology Graduate University,the OIST R&D Cluster Research Program,the OIST Proof of Concept(POC)Program,the JSPS KAKENHI Grant Number JP21F21754 and Alexander von Humboldt Foundation。
文摘Self-assembled monolayers(SAMs)are widely used as hole transport materials in inverted perovskite solar cells,offering low parasitic absorption and suitability for semitransparent and tandem solar cells.While SAMs have shown to be promising in small-area devices(≤1 cm^(2)),their application in larger areas has been limited by a lack of knowledge regarding alternative deposition methods beyond the common spin-coating approach.Here,we compare spin-coating and upscalable methods such as thermal evaporation and spray-coating for[2-(9H-carbazol-9-yl)ethyl]phosphonic acid(2PACz),one of the most common carbazole-based SAMs.The impact of these deposition methods on the device performance is investigated,revealing that the spray-coating technique yields higher device performance.Furthermore,our work provides guidelines for the deposition of SAM materials for the fabrication of perovskite solar modules.In addition,we provide an extensive characterization of 2PACz films focusing on thermal evaporation and spray-coating methods,which allow for thicker 2PACz deposition.It is found that the optimal 2PACz deposition conditions corresponding to the highest device performances do not always correlate with the monolayer characteristics.
文摘Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbation of 30 mV （peak to-peak） with the frequency ranging from 1 Hz to 1 MHz at zero bias. The contributions from dithiol SAMs and solvent interlayers were separated due to their different behaviors at ac impedance. The peak position in the loss spectra （the plot; of tgδ vs. frequency） moves to low frequcney with the incrcase of chain length of dithiols. Using a correlation of peak position with the chain length, the active energies of 23-39 meV for dithiol SAMs of C6-C10 under an ac electric field were derived,
基金financially supported by the Scientific Research Foundation of State Education Ministry of China (Jiaowaisiliu[2008]890)Research Foundation of Education Department of Hebei Province of China(No. 2007132)
文摘A mixed self-assembled monolayers （SAMs） of thioctic acid （T-COOH） and thioctic acid amide （T-NH2） were used to immobilize tyrosinase for fabricating biosensor. The results showed that the mixed SAMs prepared from solution at the ratio of 1：4 provided an excellent microenvironment for enzymatic reaction between tyrosinase and substrate. The biosensor exhibited a fast response and high sensitivity for sensing substrate.
基金Funded by National Natural Science Foundation of China (No. 50672055,50872077)National Key Technology R&D Program (No. 2006BAF02A28)the Graduate Innovation Fund of Shaanxi University of Science and Technology
文摘SrTiO3 thin film was successfully prepared on the functionalized organic self-assembled monolayers（SAMs） by the Liquid Phase Deposition（LPD） method.The as-prepared samples were characterized by X-ray diffraction（XRD）,atomic force microscope（AFM）,scanning electron microscopy（SEM） and metallographic microscope.Measurement of contact angle showed that the hydrophobe substrate was changed into hydrophile by UV irradiation.AFM photographs of octadecyl-trichloro-silane self-assembled monolayer（OTS-SAM） surface approved that UV irradiation did change the morphology of OTS monolayer and provided evidence for the conversion of hydrophilic characteristic.Photographs of Metallographic Microscope showed that OTS-SAM had an active effect on the deposition of SrTiO3 thin film.XRD and SEM indicated that the thin film was of pure cubic phase SrTiO3 and composed of nanosized grains with a size in the range of 100-500 nm.The formation mechanism of the SrTiO3 film was proposed.
基金This work is supported by the National Natural Science Foundation of China （Grant No. 90307014）.
文摘Based on MEMS technology,immunosensor with an'Au,Pt,Pt'three-microelectrode system enclosed in a SU-8 micro pool was fabricated.Employing SAMs technique,the Au electrode was modified by cysteamine(Cys)to assemble gold nanopanicles(nanogold)layer,subsequently,a layer of protein G(PG)was immobilized on nanogold layer to further capture antibody orientedly.Compared with the immunosensors using bulky gold electrode and direct PG binding to electrode immobilization technique for antibody,it has attractive advantages,such as miniaturization,good compatibility,broad linear range for human immunoglobulin(HIgG)and easy to be designed into array.
基金Supported by the Natural Science Project of Hubei Provin-cial Department of Education (2005D6002)
文摘Impedance titration was used to determine the surface dissociation characteristics of short-chain carboxyl mercaptan self-assembled monolayers （SAMs）. Based on the change of the cyclic voltammetric peak current and the charge-transfer resistance, which was related to pH value of the solution, the surface pKa of mercaptoacetic acid（MA）, 3-mercaptopropionic acid（MPA） and ω-mercaptohexanic acid（MHA） self-assembled membranes, with ionic strength being 0.1 mol/L, were determined to be 5.20, 4.80, 7.40, respectively. In addition, factors such as time needed for assembling, structure of monolayers and ionic strength, which effected the surface pKa, were studied as well. Such surface pKa shifts were sufficiently explained by interactions between interfacial molecules and hydrophobicity.
基金the National Natural Science Foundation of China(No.20573069)for financial support of this research.
文摘The self-assembled monolayers （SAMs） of imidazoline （IM） on the iron surface were characterized by scanning electron microscope （SEM） and scanning electrochemical microscopy （SECM）. The results showed that SAMs were an effective inhibition film for iron.
文摘The intermolecular interaction in an azobenzene self-assembled monolayers (SAMs) on gold electrode was investigated by controlling the assembling time and using mixed self-assembled techniques, and the variation of apparent electron transfer rate constant (k(s)) of azobenzene SAMs with different molecular packing density is reported.
文摘A new method for preparing chemically modified gold electrode by anchoring thionine to self-assembled bi - (2 -aminoethyl) -aminodithiocarboxyl acid(BANTC) monolayers through coordination with Cu2+ is described. This thionine modified electrode exhibits two-new redox couples.Two protons were involved in the electrochemical process undergone by the couple I in the pH range of 5.0-10.0. The apparent surface electron transfer rate constant is about 0.050s-1.
基金supported by the National Basic Research Program of China(No.2012CB619100)the National Natural Science Foundation of China(No.51232002)+1 种基金the 111 Project(No.B13039)the Science and Technology Program of Guangdong Province(No.2013B010403007)
文摘Oligo（ethylene glycol） （-OEG） and amino （-NH2） mixed self-assembled monolayers （SAMs） were employed as model substrates to investigate the effect of charge density on the fate of mesenchymal stem cells （MSCs） and osteopontin （OPN） adsorption. We found that all surfaces presenting -NH2 groups favored cell responses regardless of the surface charge. Meanwhile, OPN adsorption could remain stable on the mixed SAMs over a certain range of charge densities. Our work provides some insights into cell responses and protein adsorption to surface charge.
文摘The self-assembled monolayers （SAMs） of 1 tetradecylphosphonic acid （TDPA） formed on the 430 stain-less steel （SS430）were studied. Surface and morphological characterizations were studied by Fourier transformed in-frared spectroscopy （FTIR）, water contact angle measurement and atomic force microscopy （AFM）. And the elec-trochemical study on the corrosion inhihition of the SAMs was performed by polarization curve and electrochemical impedance spectroscopy （E1S） for evaluating the corrosion protection of the SAMs. The results show that TDPA was able to form a film spontaneously on the SS430 surface and the hydrophobic SAMs could protect SS430 from corrosion effectively. In addition, the oxide surface formed by the heat pretreatment could accelerate the rate of ad-sorption, but had little effect on improving the inhibition efficiency.
文摘A newly synthesized reagent 2-amino-5-mercapto-[1, 3, 4]triazole (MATZ) has been usedto fabricate self-assembled monolayers (SAMs) on gold electrode for the first time. The SAMselectrode was characterized by electrochemical methods and scanning electronic microscopy (SEM),the SAMs electrode can be used to determinate dopamine (DA) and uric acid (UA) simultaneouslywith a detection limit of 8×10-7 mol/L for DA and 1×10-6 mol/L for UA respectively. The SAMscan also be used to detect the contents of DA and UA in synthetic urine sample with satisfactoryresults.
文摘The electrochemical quartz crystal microbalance (EQCM) is used to investigate the characteristics of the thiolated self-assembled monolayer(SAM) on gold surface.A 5MHz QCM element serves as both the mass-sensitive sensor and the working electrode of the electrochemical system.The 6-mecapto-1-hexanol and and the 16-mer oligonucleotide with a mercaptohexyl group at the 5'-phosphate end are utilized to form the SAM on the gold electrode.The frequency response of the QCM during cyclic voltammetry (CV) scanning and cbronoamperometry are recorded together with the electrochemical current.The experimental results indicates that the frequency response is more sensitive to the surface coverage.Therefore,the response of the EQCM reveals more details of the SAM on gold electrode.It is especially useful for analysing the immobilization quality,such as probe orientation and coverage,of the SAM.
基金supported by the funds of the National Natural Science Foundation of China (Nos.21175108 and 21165016)the project of education department of Gansu Province (No. 0928B-02)
文摘Self-assembled monolayers（SAMs） of thiol-derivatized porphyrin molecules on Au substrate have attracted extensively interest for use in sensing,optoelectronic devices and molecular electronics.In this paper,tetra-[p-（3-mercaptopropyloxy）-phenyl]porphyrin was synthesized and self-assembled with thiol on Au substrate for porphyrin SAMs（PPS 4）.The electrochemical results demonstrated that PPS 4 could form excellent SAMs on gold surface.Self-assembled nanojunctions of PPS 4 were fabricated by using gold nanogap electrodes（gap width：ca.100 nm）.With the light on/off,the nanojunctions showed current high/low as nanometer scaled photo switch.
文摘Self-assembled monolayers (SAMs) are ordered organic films formed by adsorption of an active organic coating on a solid surface. Their formation provides an alternative, highly innovative, to current traditional chemical treatments of the titanium surfaces. For this reason the structural phases, the formation and the growth of SAMs is described from a surface science point of view. Particulars are given to SAMs on titanium concerning surface morphology, chemical composition and affinity of specific head group for Ti surfaces (silanes, siloxane, phosphonates and phosphates). Preparation, coating methodologies, limitations and techniques used for the characterization of SAMs are reported. For their physicochemical characteristics and micro-nano scale features some perspectives of using SAMs in biomedical application are outlined.
基金financially supported by the National Natural Science Foundation of China(Nos.51173181 and 51373166)“The Hundred Talents Program”from the Chinese Academy of Sciences and the International S&T Cooperation Program from Department of Science and Technology of Jilin Province(No.20160414032GH)
文摘Block copolymer lithography is emerging as one of the leading technologies for patteming nanoscale dense features. In almost all potential applications of this technology, control over the orientation of cylindrical and lamellar domains is required for pattern transfer from the block copolymer film. This review highlights the state-of-art development of brushes to modify the substrates to control the assembly behaviors of block copolymers in films. Selected important contributions to the development of self-assembled monolayers, polymer brushes and mats, and chemically patterned brushes are discussed.
基金This work was financially supported by the National Natural Science Foundation of China (No.50475023)the Nano Foundation of Shanghai Technology Committee (No.0252nm014)the State Key Laboratory Fund (No.0102) in State Key Laboratory for Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Science
文摘Silane coupling regent （3-mercaptopropyl trimethoxysilane （MPTS）） was prepared on the single-crystal silicon substrate to form 2-dimensional self-assembled monolayers （SAMs）. The growth behavior of SAMs formed from 3-MPTS was investigated using atomic force microscopy （AFM）, contact angle measurements, ellipsometry, and X-ray photoelectron spectroscopy （XPS）. The formation behavior of MPTS SAMs was investigated by a series of AFM images and the roughness of MPTS SAMs on silicon substrates with the assembling time from 1 min to 24 h. The water contact angle measurements indicated the growth behavior of MPTS that correlated with the AFM measurements at different immersion times, too. The chemical states of the typical elements in the MPTS SAMs were analyzed using X-ray photoelectron spectroscopy. The results show that MPTS is self-assembled on the substrate.
文摘A novel hydrogen peroxide biosensor has been fabricated based on covalently linked horseradish peroxidase （HRP） onto L- glutathione self-assembled monolayers （SAMs）. The SAMs-based electrode was characterized by electrochemical methods, and direct electrochemistry of HRP can be achieved with formal potential of-0.242 V （vs. saturated Ag/AgCl） in pH 7 phosphate buffer solution （PBS）, the redox peak current is linear to scan rate and rate constant can be calculated to be 0.042 s^-1. The HRP-SAMs- based biosensors show its better electrocatalysis to hydrogen peroxide in the concentration range of 1 × 10^-6 mol/L to 1.2 × 10^-3 mol/L with a detection limit of 4 × 10^-7 mol/L. The apparent Michealis-Menten constant is 3.12 mmol/L. The biosensor can effectively eliminate the interferences of dopamine, ascorbic acid, uric acid, catechol and p-acetaminophen.
