The seismic vulnerability index(Kg) is a parameter that depends on the dynamic properties of soil. With this parameter, it is possible to evaluate the vulnerability of a point-based site under strong ground motion. Si...The seismic vulnerability index(Kg) is a parameter that depends on the dynamic properties of soil. With this parameter, it is possible to evaluate the vulnerability of a point-based site under strong ground motion. Since it is related to the natural vibration period and amplification factor, the parameter can be calculated for both soil and structure. In this study, HVSR microtremor measurements are recorded at more than 200 points in the Van region to generate a seismic vulnerability index map. After generating the map, it is determined that the hazard potential and seismic vulnerability index is high at the sites close to Van Lake and at the densely populated city center. Damage information of the buildings investigated after the 2011 Van earthquakes(Mw = 7.1) are placed on the seismic vulnerability index map and it is realized that there may be a correlation between the damage and the seismic vulnerability index. There is a high correlation, approximately 80 percent, between the damage rate map based on the damaged building data and the K_g values. In addition, vulnerability indexes of buildings are calculated and the effect of local soil conditions and building properties on the damage levels are determined. From the results of this study and the site observations after the 2011 Van earthquakes, it is found that structural damage is not only structure-dependent but is also related to the dynamic behavior of soil layers and local soil conditions.展开更多
Building construction site plays an important role in the economic aspect of a region. So any disruption due to hazard event like earthquake can cause several direct and indirect damages. Direct damages can lead to th...Building construction site plays an important role in the economic aspect of a region. So any disruption due to hazard event like earthquake can cause several direct and indirect damages. Direct damages can lead to the loss of equipments and qualified persons. Indirect damages can lead to inflation and loss of purchasing power. To deal with that situation, parameters that govern the vulnerability of building construction site have been identified. Using a MCDM （multiple criteria decision making） method, the priority order of these parameters has been set. Then a PVI （partial vulnerability index） and a GVI （global vulnerability index） are proposed. These indexes allow the classification of building construction sites according to their intrinsic vulnerability and seismic vulnerability respectively that is through the use of a given classification. Several Algerian building construction sites belonging to different seismic zones were considered in order to show the applicability of the method.展开更多
Seismic Microzonation comprising study of site specific seismic Microtremor (H/V ratio) is deployed to generate seismological parameters (Peak Frequency, Peak Amplification, Site Vulnerability Index) that may help est...Seismic Microzonation comprising study of site specific seismic Microtremor (H/V ratio) is deployed to generate seismological parameters (Peak Frequency, Peak Amplification, Site Vulnerability Index) that may help estimate requisite factors for sound building design codes that can be used to construct risk resilient infrastructures. In this paper the site of Pakyong, Sikkim, India has been investigated by dividing it into three differed zones (Zone 1, Zone II, Zone III). The study area is associated with site amplification factor varying from 1.47 to 11.49 with corresponding frequency variations from 0.5 Hz - 12.5 Hz in which site vulnerability index found varied from 0.2 to 220.6. The anomalous subsurface formation with its high amplification corresponds to the centre of the Pakyong sites having conspicuous trend in NW-SE direction suggesting the existence of geological formations of Chlorite, Phyllite with intercalations of Quartzite beneath the centre of Pakyong site. The risk associated with vulnerability index for different zones maintains its variability as Zone I > Zone II > Zone III, indicating the low vulnerability index values are attributed to compact parts of the sub-surface materials with less amplifications whilst high vulnerability index of the site corresponds to relatively lower strength of the sub-surface materials and soft sediments underlying the Pakyong site which can be used for constructing risk resilient structure by enhancing the stiffness coefficient of the sub-surface by providing plausible engineering solutions for the purpose.展开更多
基金Supported by:Scientific Research Projects Office of Van YüzüncüYil University Project Number 2015-MIM-B259
文摘The seismic vulnerability index(Kg) is a parameter that depends on the dynamic properties of soil. With this parameter, it is possible to evaluate the vulnerability of a point-based site under strong ground motion. Since it is related to the natural vibration period and amplification factor, the parameter can be calculated for both soil and structure. In this study, HVSR microtremor measurements are recorded at more than 200 points in the Van region to generate a seismic vulnerability index map. After generating the map, it is determined that the hazard potential and seismic vulnerability index is high at the sites close to Van Lake and at the densely populated city center. Damage information of the buildings investigated after the 2011 Van earthquakes(Mw = 7.1) are placed on the seismic vulnerability index map and it is realized that there may be a correlation between the damage and the seismic vulnerability index. There is a high correlation, approximately 80 percent, between the damage rate map based on the damaged building data and the K_g values. In addition, vulnerability indexes of buildings are calculated and the effect of local soil conditions and building properties on the damage levels are determined. From the results of this study and the site observations after the 2011 Van earthquakes, it is found that structural damage is not only structure-dependent but is also related to the dynamic behavior of soil layers and local soil conditions.
文摘Building construction site plays an important role in the economic aspect of a region. So any disruption due to hazard event like earthquake can cause several direct and indirect damages. Direct damages can lead to the loss of equipments and qualified persons. Indirect damages can lead to inflation and loss of purchasing power. To deal with that situation, parameters that govern the vulnerability of building construction site have been identified. Using a MCDM （multiple criteria decision making） method, the priority order of these parameters has been set. Then a PVI （partial vulnerability index） and a GVI （global vulnerability index） are proposed. These indexes allow the classification of building construction sites according to their intrinsic vulnerability and seismic vulnerability respectively that is through the use of a given classification. Several Algerian building construction sites belonging to different seismic zones were considered in order to show the applicability of the method.
文摘Seismic Microzonation comprising study of site specific seismic Microtremor (H/V ratio) is deployed to generate seismological parameters (Peak Frequency, Peak Amplification, Site Vulnerability Index) that may help estimate requisite factors for sound building design codes that can be used to construct risk resilient infrastructures. In this paper the site of Pakyong, Sikkim, India has been investigated by dividing it into three differed zones (Zone 1, Zone II, Zone III). The study area is associated with site amplification factor varying from 1.47 to 11.49 with corresponding frequency variations from 0.5 Hz - 12.5 Hz in which site vulnerability index found varied from 0.2 to 220.6. The anomalous subsurface formation with its high amplification corresponds to the centre of the Pakyong sites having conspicuous trend in NW-SE direction suggesting the existence of geological formations of Chlorite, Phyllite with intercalations of Quartzite beneath the centre of Pakyong site. The risk associated with vulnerability index for different zones maintains its variability as Zone I > Zone II > Zone III, indicating the low vulnerability index values are attributed to compact parts of the sub-surface materials with less amplifications whilst high vulnerability index of the site corresponds to relatively lower strength of the sub-surface materials and soft sediments underlying the Pakyong site which can be used for constructing risk resilient structure by enhancing the stiffness coefficient of the sub-surface by providing plausible engineering solutions for the purpose.
