Based on previously reported work, we propose a new method for calibrating image plate(IP) scanners, offering greater flexibility and convenience, which can be extended to the calibration tasks of various scanner mode...Based on previously reported work, we propose a new method for calibrating image plate(IP) scanners, offering greater flexibility and convenience, which can be extended to the calibration tasks of various scanner models. This method was applied to calibrate the sensitivity of a GE Typhoon FLA 7000 scanner. Additionally, we performed a calibration of the spontaneous signal attenuation behavior for BAS-MS, BAS-SR, and BAS-TR type IPs under the 20±1℃ environmental conditions, and observed significant signal carrier diffusion behavior in BAS-MS IP. The calibration results lay a foundation for further research on the interaction between ultra-short, ultra-intense lasers and matter.展开更多
Several capture techniques are used in intraoral optical scanners in the dental market,such as Triangulation(Cerec Omnicam,Dentsply Sirona),Activewave front sampling(3M ESPE)and confocal technology(iTero,Align).The ac...Several capture techniques are used in intraoral optical scanners in the dental market,such as Triangulation(Cerec Omnicam,Dentsply Sirona),Activewave front sampling(3M ESPE)and confocal technology(iTero,Align).The accuracy of intraoral scanners is the most significant focal point for developers to research.This in-vitro study studied the accuracy of confocal scanners launched from 2015-2020(Trios 3,Trios 4,iTero Element;3Shape Trios A/S,Copenhagen,Denmark,and iTero Element2,and iTero Element5D;Align Technologies,San Jose,CA,USA).A 3D printing model modified from the American National Standard No.132 was scanned five times each scanner.Both Trios3 and Trios4 were scanned using regular scan mode(N)and high-resolution mode(HR).All scanning methods followed the recommendations from the manufacturers.Then the digital models were exported and saved as STL files.Various measurements were determined in the digital model from each scan using Rhinoceros 3D Software(Rhino,Robert McNeel&Associates for Windows,Washington DC,USA).Measurements from the 3D printed model were used as control.All data were recorded in Microsoft Excel and then transferred to SPSS.Descriptive statistics were recorded.Multiple comparisons of various measurements were made among the different scanners and with the control using One-way ANOVA and post hoc using Sheffe(p<0.01).The surface area in the X and Y axis ranged from 2–60 mm,while the depth(Z-axis)ranged from 2–8 mm.The Trios and iTero families showed similar accuracy.However,for the diagonal,the Trios series showed better results compared with the iTero series.Within the same brand,different versions showed no significant change regarding accuracy.展开更多
<b>Introduction:</b> Digital models showed promising results for orthodontic diagnosis and treatment planning. Digital models can be obtained from alginate impressions as well as direct intra-oral scanners...<b>Introduction:</b> Digital models showed promising results for orthodontic diagnosis and treatment planning. Digital models can be obtained from alginate impressions as well as direct intra-oral scanners. Studies assessing the accuracy of digital models have shown digital models to be valid, clinically acceptable, and more quickly obtainable. With the advent of new scanners with better scanning technology researches are necessary to evaluate their accuracy and reliability. <b>Aim of Study:</b> To evaluate the diagnostic accuracy of 3D digital models obtained through intraoral and extraoral scanning modalities to the reference gold standard plaster model. <b>Material & Methods:</b> Twenty-four adult male and female subjects were randomly selected for this study. The intraoral scanners evaluated in this study were Sirona (CEREC Omnicam) and 3 shape (TRIOS 3), while the laboratory scanners used were Sirona (inEos X5), and 3 shape (D850). Intra-oral scanning of the subjects and extra-oral scanning of their alginate impressions, plaster models of the alginate impression, rubber base impression, and plaster model of their rubber base impression were done. Linear dental measurements included intermolar width, interpremolar width, intercanine width, mesiodistal width of the 1<sup>st</sup> permanent molar, 1<sup>st</sup> premolar, canine and central incisor and arch width. All data were collected, tabulated and subjected to statistical analysis. <b>Results:</b> Small differences between the plaster and digital models were observed. Intra-observer reliability analysis for 14 out of the 16 measurements showed that all variables exhibited good to excellent reliability. <b>Conclusions: </b>There was no difference between the digitization using the intraoral scanner or the laboratory scanner. The most accurate digitization technique was the 3 Shape laboratory scanner of the cast of the alginate impression. The inEos X5 showed the highest error of digitization of the alginate and rubber base impressions.展开更多
To expand scanning area and attack range without changing the inner structure of intelligent warhead, a new arrangement mode of the scanner for intelligent mine is proposed. The required coordinate systems are es...To expand scanning area and attack range without changing the inner structure of intelligent warhead, a new arrangement mode of the scanner for intelligent mine is proposed. The required coordinate systems are established firstly on the basis of advanced dynamics principle. and the exterior ballistics equations are deduced. Then the equations of scanning trails are established by the method of space analytic geometry. To get the scanning trails. the differential equations are transformed into discrete simulation model using the algorithm of fourth order Runge-Kutta and then are simulated using Matlab. Compared with the scanning trails obtained by the traditional layout of scanner, the scanning trails obtained by the proposed layout of scanner has larger horizontal range of scanning circle and bigger trarget acquisition probability. Therefore, the new arrangement mode of the scanner for intelligent mine can increase attack range.展开更多
The paper approaches the problem of the command functions of galvanometer-based scanners （GS） that are necessary to produce the linear plus parabolic scanning function of the GS, which we have proved previously to p...The paper approaches the problem of the command functions of galvanometer-based scanners （GS） that are necessary to produce the linear plus parabolic scanning function of the GS, which we have proved previously to produce the highest possible duty cycle （i.e., time efficiency） of the device. We have completed this theoretical aspect （which contradicted what has been stated previously in the literature, where it has been considered that the linear plus sinusoidal scanning function was the best） with the experimental study of the most used scanning functions of the GSs （sawtooth, sinusoidal and triangular）, with applications in biomedical imaging, in particular in optical coherence tomography, demonstrating that the triangular function is always the best one to be applied, from both an optical and a mechanical point of view. In the present study the input voltage/command function which should be applied to the GS to produce the desired triangular scanning function （with controlled non-linearity for the fastest possible stop-and-turn portions） was determined analytically, in relationship with the active torque that drives the device. This command function is analyzed with regard to the specific, respectively required parameters of the GS： natural frequency and damping factor, respectively scan speed and amplitude. The modeling in an open loop control structure of the GS is finally discussed as a trade-off between using the highest possible duty cycle and minimizing the maximum peaks of the input voltage.展开更多
Scanning hardcopy non-metric images is one of the most important sources in digital mapping. Low-cost scanners are still widely used in many applications as they can produce digital images of comparable precisions to ...Scanning hardcopy non-metric images is one of the most important sources in digital mapping. Low-cost scanners are still widely used in many applications as they can produce digital images of comparable precisions to those produced by expensive professional scanners. Yet, inexpensive scanners introduce geometrical distortions in the measured image coordinates that must be assessed and compensated before using their products for further analysis. In this article, several 2D-to-2D transformation models were investigated to calibrate flatbed scanners with different resolutions and sizes. We evaluated the potential of each model using two gridded-crosses plotted on high-quality transparent sheets. Control coordinates were provided through a photogram-metric analytical plotter. After scanning the sheets, least squares matching was applied to determine the precise locations of the crosses. By comparing the control coordinates and those estimated from digitized images, it was found that the mathematical model based on the projective transformation gives the best results for standardizing the geometric properties of flatbed scanners. The results show that scanning resolution of 2400 dpi achieves the requirements for large-scale mapping applications.展开更多
Leaf normal distribution is an important structural characteristic of the forest canopy. Although terrestrial laser scanners（TLS） have potential for estimating canopy structural parameters, distinguishing between le...Leaf normal distribution is an important structural characteristic of the forest canopy. Although terrestrial laser scanners（TLS） have potential for estimating canopy structural parameters, distinguishing between leaves and nonphotosynthetic structures to retrieve the leaf normal has been challenging. We used here an approach to accurately retrieve the leaf normals of camphorwood（Cinnamomum camphora） using TLS point cloud data.First, nonphotosynthetic structures were filtered by using the curvature threshold of each point. Then, the point cloud data were segmented by a voxel method and clustered by a Gaussian mixture model in each voxel. Finally, the normal vector of each cluster was computed by principal component analysis to obtain the leaf normal distribution. We collected leaf inclination angles and estimated the distribution, which we compared with the retrieved leaf normal distribution. The correlation coefficient between measurements and obtained results was 0.96, indicating a good coincidence.展开更多
This paper proposes an automatic model-based viewpoint planning method, which can achieve high precision and high efficiency for freeform surfaces inspection using plane structured light scanners. The surface model is...This paper proposes an automatic model-based viewpoint planning method, which can achieve high precision and high efficiency for freeform surfaces inspection using plane structured light scanners. The surface model is utilized in stereolithography format, which is widely used as an industrial standard. The proposed method consists of 4 steps： topology reconstruction, mesh refinement, scan direction determination and viewpoint generation. In the first step, the topology structure of the surface model is reconstructed according to a designed data structure, based on which a neighborhood search algorithm is developed. In the second step, big facets in the surface model are segmented into several small ones, which are suitable for viewpoint planning. In the third step, an initial scan region of a viewpoint is grouped by the neighborhood search algorithm combining with total area and normal vector restrictions. Accordingly, the scan direction is determined by the normal vectors of facets in the initial scan region. In the fourth step, the position, the orientation, and the final scan region of the viewpoint are determined by 4 scan constraints, i.e., field of view, working distance range, view angle and overlap. Experimental results verify the effectiveness and advantages of the proposed method.展开更多
A new wide-range fast readout system capable of adaptive identification is designed for wire scanners,which are used to measure beam profiles and emittance.This system is capable of handling varying current signals wi...A new wide-range fast readout system capable of adaptive identification is designed for wire scanners,which are used to measure beam profiles and emittance.This system is capable of handling varying current signals with Gaussian distributions and current pulses up to 1000 counts/s, as well as an input current range of 1 n A–1 m A. When tested, the resolution was found to exceed 3.68% for full scale, the nonlinearity was found to be less than 0.11%, and the measurement sensibility was found to be less than 5 p A. We believe that the system will play a crucial role in improving the measurement accuracy of beam diagnosis and the efficiency of accelerator operation,as well as decreasing the time required for beam tuning.This system was applied to the beam diagnosis of an injector II prototype for an accelerator-driven subcritical system and produced excellent measurement results. A description of the adaptive fast readout system for wire scanners is presented in this paper.展开更多
For both the vibrating and steady supporting surfaces of a scanning disk in a Besocke-style piezoelectric scanner, a theoretical model is given by considering the nonlinear lateral friction at the micro-contact interf...For both the vibrating and steady supporting surfaces of a scanning disk in a Besocke-style piezoelectric scanner, a theoretical model is given by considering the nonlinear lateral friction at the micro-contact interface between the positioning legs and the supporting surface. Numerical simulations demonstrate that unexpected flexural vibrations can arise from a vibrating ramp, and their frequencies are lower than the eigenfrequencies of the scanner in the linearly elastic regime. The vibrations essentially depend on 1） the vibrational states of the supporting ramp and the steel ball tips on the three piezo- electric positioning legs, and 2） the tribological characteristics of the contacts between the tips and the ramp. The results give an insight into the intrinsic vibrations of the scanners, and are applicable in designing and optimizing piezoelectric scanning systems.展开更多
During his 30-year career,radiologist Philippe Douek has pored over thousands of images produced by computed tomography(CT)scanners,looking for signs of illness or injury.But the professor of radiology at the Universi...During his 30-year career,radiologist Philippe Douek has pored over thousands of images produced by computed tomography(CT)scanners,looking for signs of illness or injury.But the professor of radiology at the University Claude Bernard Lyon 1 in France,was wowed by the performance of a new type of device known as a photon-counting detector(PCD)CT scanner.Douek and his colleagues have been putting prototype PCD machines through their paces,scanning animals,imaging dummies,and even Douek’s lungs.The images produced with the technology“are much more detailed,”he said.展开更多
Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners with nanometer resolution are studied by using an electro-mechanical coupling Timoshenko beam model. Meanwhile, the effects of fri...Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners with nanometer resolution are studied by using an electro-mechanical coupling Timoshenko beam model. Meanwhile, the effects of friction, the first moment, and moment of inertia induced by mass loads are considered. The predicted resonance frequencies of the ceramic tubes are sensitive to not only the mechanical parameters of the scanners, but also the friction acting on the attached shaking ball and corresponding bending moment on the tubes. The theoretical results are in excellent agreement with the related experimental measurements. This model and corresponding results are applicable for optimizing the structures and performances of the scanners.展开更多
The article is to study the development of computer-aided design of X-ray microtomography—the device for investigating the structure and construction of three-dimensional images of organic and inorganic objects on th...The article is to study the development of computer-aided design of X-ray microtomography—the device for investigating the structure and construction of three-dimensional images of organic and inorganic objects on the basis of shadow projections. This article provides basic information regarding CAD of X-ray microtomography and a scheme consisting of three levels. The article also shows basic relations of X-ray computed tomography, the generalized scheme of an X-ray microtomographic scanner. The methods of X-ray imaging of the spatial microstructure and morphometry of materials are described. The main characteristics of an X-ray microtomographic scanner, the X-ray source, X-ray optical elements and mechanical components of the positioning system are shown. The block scheme and software functional scheme for intelligent neural network system of analysis of the internal microstructure of objects are presented. The method of choice of design parameters of CAD of X-ray microtomography aims at improving the quality of design and reducing costs of it. It is supposed to reduce the design time and eliminate the growing number of engineers involved in development and construction of X-ray microtomographic scanners.展开更多
A significant volume of Municipal Solid Waste incineration bottom ash and fly ash (i.e.,incineration residues) are commonly disposed as landfill.Meanwhile,reclamation of landfill sites to create a new land space after...A significant volume of Municipal Solid Waste incineration bottom ash and fly ash (i.e.,incineration residues) are commonly disposed as landfill.Meanwhile,reclamation of landfill sites to create a new land space after their closure becomes an important goal in the current fewer and fewer land availability scenario in many narrow countries.The objective of this study is to reclaim incineration residue materials in the landfill site by using cement and coal fly ash as stabilizers aiming at performing quality check as new developed materials before future construction.Indeed,physical and mechanical properties of these new materials should be initially examined at the micro scale,which is the primary fundamental for construction at larger scale.This research examines quantitative influences of using the combination of cement and coal fly ash at different ratio on the internal structure and ability of strength enhancement of incineration residues when suffering from loading.Couple of industrial and micro-focus X-ray computed tomography (CT) scanners combined with an image analysis technique were utilized to characterize and visualize the behavior and internal structure of the incineration residues-cement-coal fly ash mixture under the series of unconfined compression test and curing period effect.Nine types of cement solidified incineration residues in term of different curing period (i.e.,7,14,28 days) and coal fly ash addition content (i.e.,0%,9%,18%) were scanned before and after unconfined compression tests.It was shown that incineration residues solidified by cement and coal fly ash showed an increase in compression strength and deformation modulus with curing time and coal fly ash content.Three-dimension computed tomography images observation and analysis confirmed that solidified incineration residues including incineration bottom and fly ash as well as cement and coal fly ash have the deliquescent materials.Then,it was studied that stabilized parts play a more important role than spatial void distribution in increment or reduction of compression strength.展开更多
Dose estimation and quality control in computed tomography (CT) scanners are useful in controlling the dose of radiation given to patients while tests are carried out. The study was performed in a 16-slice Computed To...Dose estimation and quality control in computed tomography (CT) scanners are useful in controlling the dose of radiation given to patients while tests are carried out. The study was performed in a 16-slice Computed Tomography (CT) system of LightSpeed RT16 Xtra CT scanner. Quality control was done using a vendor-provided QA Phantom, and the six aspects of image quality were measured. For CT dosimetry, Computed Tomography Dose index volume (CTDIvol) was performed using Computed Tomography Dose Index (CTDI) Phantom. CTDI Phantom consists of three parts: Pediatric Head, Adult Head, and Adult Body Phantom. A 10 cm long pencil ion chamber DCT-10 was used to measure the dose at different positions inside the CTDI Phantom. Data were collected using MagicMax Universal software. For dose estimation of the CTDIvol Report of AAPM Task Group, 96 and 111 formalisms were used. For Pediatric Head, Adult Head, and Adult Body Phantom the measured CIDIvol was 61.04 mGy, 48.11 mGy, and 18.08 mGy respectively. The study has shown deviations of 7%, 15%, and 19% between estimated and console-displayed doses for Pediatric Head, Adult Head, and Adult Body scan techniques respectively. The six aspects of image quality measured by QA Phantom were found to be compatible with the specifications of the machine and CTDIvol measured by CTDI Phantom were found within a tolerance limit of ±20%. Hence, the QC and dosimetry of the mentioned machine are within the limit.展开更多
Three-dimensional(3D)nanoprinting via two-photon polymerization offers unparalleled design flexibility and precision,thereby enabling rapid prototyping of advanced micro-optical elements and systems that have found im...Three-dimensional(3D)nanoprinting via two-photon polymerization offers unparalleled design flexibility and precision,thereby enabling rapid prototyping of advanced micro-optical elements and systems that have found important applications in endomicroscopy and biomedical imaging.The potential of this versatile tool for monolithic manufacturing of dynamic micro-opto-electro-mechanical systems(MOEMSs),however,has not yet been sufficiently explored.This work introduces a 3D-nanoprinted lens actuator with a large optical aperture,optimized for remote focusing in miniaturized imaging systems.The device integrates orthoplanar linear motion springs,a self-aligned sintered micro-magnet,and a monolithic lens,actuated by dual microcoils for uniaxial motion.The use of 3D nanoprinting allows complete design freedom for the integrated optical lens,whereas the monolithic fabrication ensures inherent alignment of the lens with the mechanical elements.With a lens diameter of 1.4 mm and a compact footprint of 5.74 mm,it achieves high mechanical robustness at resonant frequencies exceeding 300 Hz while still providing a large displacement range of 200μm(±100μm).A comprehensive analysis of optical and mechanical performance,including the effects of coil temperature and polymer viscoelasticity,demonstrates its advantages over conventional micro-electro-mechanical system actuators,showcasing its potential for next-generation imaging applications.展开更多
Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a...Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a processebased physical modeling of a pileereinforced reservoir landslide and present an improved deformation analysis involving large strains and water effects.We collect multieperiod point clouds using a terrain laser scanner and reconstruct its deformation field through a point cloud processing workflow.The results show that this method can accurately describe the landslide surface deformation at any time and area by both scalar and vector fields.The deformation fields in different profiles of the physical model and different stages of the evolutionary process provide adequate and detailed landslide information.We analyze the large strain upstream of the pile caused by the pile installation and the consequent violent deformation during the evolutionary process.Furthermore,our method effectively overcomes the challenges of identifying targets commonly encountered in geotechnical modeling where water effects are considered and targets are polluted,which facilitates the deformation analysis at the wading area in a reservoir landslide.Eventually,combining subsurface deformation as well as numerical modeling,we comprehensively analyze the kinematics and failure mechanisms of this complicated object involving landslides and pile foundations as well as water effects.This method is of great significance for any geotechnical modeling concerning large-strain analysis and water effects.展开更多
Novel electron states stabilized by Coulomb interactions attract tremendous interests in condensed matter physics.These states are studied by corresponding phase transitions occurring at extreme conditions such as mK ...Novel electron states stabilized by Coulomb interactions attract tremendous interests in condensed matter physics.These states are studied by corresponding phase transitions occurring at extreme conditions such as mK temperatures and high magnetic field.In this work,we introduce a magneto-optical Kerr effect measurement system to comprehensively explore these phases in addition to conventional transport measurement.This system,composed of an all-fiber zero-loop Sagnac interferometer and in situ piezo-scanner inside a dilution refrigerator,operates below 100 m K,with a maximum field of 12 Tesla and has a resolution as small as 0.2μrad.As a demonstration,we investigate TbMn_(6)Sn_(6),where the manganese atoms form Kagome lattice that hosts topological non-trivial Dirac cones.We observed two types of Kerr signals,stemming from its fully polarized ferromagnetic ground state and positive charged carriers within the Dirac-like dispersion.展开更多
Laser scanning technology has been widely used in landslide aspects.However,the existing deformation analysis based on terrain laser scanners can only provide limited information,which is insufficient for understandin...Laser scanning technology has been widely used in landslide aspects.However,the existing deformation analysis based on terrain laser scanners can only provide limited information,which is insufficient for understanding landslide kinematics and failure mechanisms.To overcome this limitation,this paper proposes an automated method for processing point clouds collected in landslide physical modeling.This method allows the acquisition of quantitative three-dimensional(3D)deformation field information.The results show the organized and spatially related point cloud segmentation in terms of spherical targets.The segmented point clouds can be fitted to determine the locations of all preset targets and their corresponding location changes.The proposed method has been validated based on theoretical analysis and numerical and physical tests,which indicates that it can batch-process massive data sets with high computational efficiency and good noise resistance.Compared to existing methods,this method shows a significant potential for understanding landslide kinematics and failure mechanisms and advancing the application of 3D laser scanning in geotechnical modeling.展开更多
基金supported by the Nuclear Industry Academician Fund, the National Natural Science Foundation of China (Grant No. 1220051312)Young Talents Fund of China National Nuclear Corporation (Grant No. FY212406000901)。
文摘Based on previously reported work, we propose a new method for calibrating image plate(IP) scanners, offering greater flexibility and convenience, which can be extended to the calibration tasks of various scanner models. This method was applied to calibrate the sensitivity of a GE Typhoon FLA 7000 scanner. Additionally, we performed a calibration of the spontaneous signal attenuation behavior for BAS-MS, BAS-SR, and BAS-TR type IPs under the 20±1℃ environmental conditions, and observed significant signal carrier diffusion behavior in BAS-MS IP. The calibration results lay a foundation for further research on the interaction between ultra-short, ultra-intense lasers and matter.
基金the Maxillofacial Prosthodontics and Dental Materials Research Unit,Faculty of Dentistry,Prince of Songkla University and Scholarship Award of Thai Ph.D.Student under Thailand’s Education Hub for Southern Region of ASEAN countries,Prince of Songkla University.
文摘Several capture techniques are used in intraoral optical scanners in the dental market,such as Triangulation(Cerec Omnicam,Dentsply Sirona),Activewave front sampling(3M ESPE)and confocal technology(iTero,Align).The accuracy of intraoral scanners is the most significant focal point for developers to research.This in-vitro study studied the accuracy of confocal scanners launched from 2015-2020(Trios 3,Trios 4,iTero Element;3Shape Trios A/S,Copenhagen,Denmark,and iTero Element2,and iTero Element5D;Align Technologies,San Jose,CA,USA).A 3D printing model modified from the American National Standard No.132 was scanned five times each scanner.Both Trios3 and Trios4 were scanned using regular scan mode(N)and high-resolution mode(HR).All scanning methods followed the recommendations from the manufacturers.Then the digital models were exported and saved as STL files.Various measurements were determined in the digital model from each scan using Rhinoceros 3D Software(Rhino,Robert McNeel&Associates for Windows,Washington DC,USA).Measurements from the 3D printed model were used as control.All data were recorded in Microsoft Excel and then transferred to SPSS.Descriptive statistics were recorded.Multiple comparisons of various measurements were made among the different scanners and with the control using One-way ANOVA and post hoc using Sheffe(p<0.01).The surface area in the X and Y axis ranged from 2–60 mm,while the depth(Z-axis)ranged from 2–8 mm.The Trios and iTero families showed similar accuracy.However,for the diagonal,the Trios series showed better results compared with the iTero series.Within the same brand,different versions showed no significant change regarding accuracy.
文摘<b>Introduction:</b> Digital models showed promising results for orthodontic diagnosis and treatment planning. Digital models can be obtained from alginate impressions as well as direct intra-oral scanners. Studies assessing the accuracy of digital models have shown digital models to be valid, clinically acceptable, and more quickly obtainable. With the advent of new scanners with better scanning technology researches are necessary to evaluate their accuracy and reliability. <b>Aim of Study:</b> To evaluate the diagnostic accuracy of 3D digital models obtained through intraoral and extraoral scanning modalities to the reference gold standard plaster model. <b>Material & Methods:</b> Twenty-four adult male and female subjects were randomly selected for this study. The intraoral scanners evaluated in this study were Sirona (CEREC Omnicam) and 3 shape (TRIOS 3), while the laboratory scanners used were Sirona (inEos X5), and 3 shape (D850). Intra-oral scanning of the subjects and extra-oral scanning of their alginate impressions, plaster models of the alginate impression, rubber base impression, and plaster model of their rubber base impression were done. Linear dental measurements included intermolar width, interpremolar width, intercanine width, mesiodistal width of the 1<sup>st</sup> permanent molar, 1<sup>st</sup> premolar, canine and central incisor and arch width. All data were collected, tabulated and subjected to statistical analysis. <b>Results:</b> Small differences between the plaster and digital models were observed. Intra-observer reliability analysis for 14 out of the 16 measurements showed that all variables exhibited good to excellent reliability. <b>Conclusions: </b>There was no difference between the digitization using the intraoral scanner or the laboratory scanner. The most accurate digitization technique was the 3 Shape laboratory scanner of the cast of the alginate impression. The inEos X5 showed the highest error of digitization of the alginate and rubber base impressions.
文摘To expand scanning area and attack range without changing the inner structure of intelligent warhead, a new arrangement mode of the scanner for intelligent mine is proposed. The required coordinate systems are established firstly on the basis of advanced dynamics principle. and the exterior ballistics equations are deduced. Then the equations of scanning trails are established by the method of space analytic geometry. To get the scanning trails. the differential equations are transformed into discrete simulation model using the algorithm of fourth order Runge-Kutta and then are simulated using Matlab. Compared with the scanning trails obtained by the traditional layout of scanner, the scanning trails obtained by the proposed layout of scanner has larger horizontal range of scanning circle and bigger trarget acquisition probability. Therefore, the new arrangement mode of the scanner for intelligent mine can increase attack range.
基金the support of the US Department of State through Fulbright Scholar Grant 474/2009
文摘The paper approaches the problem of the command functions of galvanometer-based scanners （GS） that are necessary to produce the linear plus parabolic scanning function of the GS, which we have proved previously to produce the highest possible duty cycle （i.e., time efficiency） of the device. We have completed this theoretical aspect （which contradicted what has been stated previously in the literature, where it has been considered that the linear plus sinusoidal scanning function was the best） with the experimental study of the most used scanning functions of the GSs （sawtooth, sinusoidal and triangular）, with applications in biomedical imaging, in particular in optical coherence tomography, demonstrating that the triangular function is always the best one to be applied, from both an optical and a mechanical point of view. In the present study the input voltage/command function which should be applied to the GS to produce the desired triangular scanning function （with controlled non-linearity for the fastest possible stop-and-turn portions） was determined analytically, in relationship with the active torque that drives the device. This command function is analyzed with regard to the specific, respectively required parameters of the GS： natural frequency and damping factor, respectively scan speed and amplitude. The modeling in an open loop control structure of the GS is finally discussed as a trade-off between using the highest possible duty cycle and minimizing the maximum peaks of the input voltage.
文摘Scanning hardcopy non-metric images is one of the most important sources in digital mapping. Low-cost scanners are still widely used in many applications as they can produce digital images of comparable precisions to those produced by expensive professional scanners. Yet, inexpensive scanners introduce geometrical distortions in the measured image coordinates that must be assessed and compensated before using their products for further analysis. In this article, several 2D-to-2D transformation models were investigated to calibrate flatbed scanners with different resolutions and sizes. We evaluated the potential of each model using two gridded-crosses plotted on high-quality transparent sheets. Control coordinates were provided through a photogram-metric analytical plotter. After scanning the sheets, least squares matching was applied to determine the precise locations of the crosses. By comparing the control coordinates and those estimated from digitized images, it was found that the mathematical model based on the projective transformation gives the best results for standardizing the geometric properties of flatbed scanners. The results show that scanning resolution of 2400 dpi achieves the requirements for large-scale mapping applications.
文摘Leaf normal distribution is an important structural characteristic of the forest canopy. Although terrestrial laser scanners（TLS） have potential for estimating canopy structural parameters, distinguishing between leaves and nonphotosynthetic structures to retrieve the leaf normal has been challenging. We used here an approach to accurately retrieve the leaf normals of camphorwood（Cinnamomum camphora） using TLS point cloud data.First, nonphotosynthetic structures were filtered by using the curvature threshold of each point. Then, the point cloud data were segmented by a voxel method and clustered by a Gaussian mixture model in each voxel. Finally, the normal vector of each cluster was computed by principal component analysis to obtain the leaf normal distribution. We collected leaf inclination angles and estimated the distribution, which we compared with the retrieved leaf normal distribution. The correlation coefficient between measurements and obtained results was 0.96, indicating a good coincidence.
文摘This paper proposes an automatic model-based viewpoint planning method, which can achieve high precision and high efficiency for freeform surfaces inspection using plane structured light scanners. The surface model is utilized in stereolithography format, which is widely used as an industrial standard. The proposed method consists of 4 steps： topology reconstruction, mesh refinement, scan direction determination and viewpoint generation. In the first step, the topology structure of the surface model is reconstructed according to a designed data structure, based on which a neighborhood search algorithm is developed. In the second step, big facets in the surface model are segmented into several small ones, which are suitable for viewpoint planning. In the third step, an initial scan region of a viewpoint is grouped by the neighborhood search algorithm combining with total area and normal vector restrictions. Accordingly, the scan direction is determined by the normal vectors of facets in the initial scan region. In the fourth step, the position, the orientation, and the final scan region of the viewpoint are determined by 4 scan constraints, i.e., field of view, working distance range, view angle and overlap. Experimental results verify the effectiveness and advantages of the proposed method.
基金supported by the National Natural Science Foundation of China(Nos.11475233,11705257,and 11775285)
文摘A new wide-range fast readout system capable of adaptive identification is designed for wire scanners,which are used to measure beam profiles and emittance.This system is capable of handling varying current signals with Gaussian distributions and current pulses up to 1000 counts/s, as well as an input current range of 1 n A–1 m A. When tested, the resolution was found to exceed 3.68% for full scale, the nonlinearity was found to be less than 0.11%, and the measurement sensibility was found to be less than 5 p A. We believe that the system will play a crucial role in improving the measurement accuracy of beam diagnosis and the efficiency of accelerator operation,as well as decreasing the time required for beam tuning.This system was applied to the beam diagnosis of an injector II prototype for an accelerator-driven subcritical system and produced excellent measurement results. A description of the adaptive fast readout system for wire scanners is presented in this paper.
基金supported by the National Basic Research Program of China (Grant No. 2012CB921504)the National Natural Science Foundation of China (Grant Nos. 11004099,1174142,and 11274169)+2 种基金the Natural Science Foundation of Jiangsu Province of China (Grant No. BK2012721)the Fundamental Research Funds for the Central Universities (Grant No. 1126020435)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘For both the vibrating and steady supporting surfaces of a scanning disk in a Besocke-style piezoelectric scanner, a theoretical model is given by considering the nonlinear lateral friction at the micro-contact interface between the positioning legs and the supporting surface. Numerical simulations demonstrate that unexpected flexural vibrations can arise from a vibrating ramp, and their frequencies are lower than the eigenfrequencies of the scanner in the linearly elastic regime. The vibrations essentially depend on 1） the vibrational states of the supporting ramp and the steel ball tips on the three piezo- electric positioning legs, and 2） the tribological characteristics of the contacts between the tips and the ramp. The results give an insight into the intrinsic vibrations of the scanners, and are applicable in designing and optimizing piezoelectric scanning systems.
文摘During his 30-year career,radiologist Philippe Douek has pored over thousands of images produced by computed tomography(CT)scanners,looking for signs of illness or injury.But the professor of radiology at the University Claude Bernard Lyon 1 in France,was wowed by the performance of a new type of device known as a photon-counting detector(PCD)CT scanner.Douek and his colleagues have been putting prototype PCD machines through their paces,scanning animals,imaging dummies,and even Douek’s lungs.The images produced with the technology“are much more detailed,”he said.
基金Project supported by the National Basic Research Program of China (Grant No. 2012CB921504)the National Natural Science Foundation of China (Grant Nos. 11004099 and 11174142)+1 种基金the State Key Laboratory of Acoustics of the Chinese Academy of Sciencesthe Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners with nanometer resolution are studied by using an electro-mechanical coupling Timoshenko beam model. Meanwhile, the effects of friction, the first moment, and moment of inertia induced by mass loads are considered. The predicted resonance frequencies of the ceramic tubes are sensitive to not only the mechanical parameters of the scanners, but also the friction acting on the attached shaking ball and corresponding bending moment on the tubes. The theoretical results are in excellent agreement with the related experimental measurements. This model and corresponding results are applicable for optimizing the structures and performances of the scanners.
文摘The article is to study the development of computer-aided design of X-ray microtomography—the device for investigating the structure and construction of three-dimensional images of organic and inorganic objects on the basis of shadow projections. This article provides basic information regarding CAD of X-ray microtomography and a scheme consisting of three levels. The article also shows basic relations of X-ray computed tomography, the generalized scheme of an X-ray microtomographic scanner. The methods of X-ray imaging of the spatial microstructure and morphometry of materials are described. The main characteristics of an X-ray microtomographic scanner, the X-ray source, X-ray optical elements and mechanical components of the positioning system are shown. The block scheme and software functional scheme for intelligent neural network system of analysis of the internal microstructure of objects are presented. The method of choice of design parameters of CAD of X-ray microtomography aims at improving the quality of design and reducing costs of it. It is supposed to reduce the design time and eliminate the growing number of engineers involved in development and construction of X-ray microtomographic scanners.
文摘A significant volume of Municipal Solid Waste incineration bottom ash and fly ash (i.e.,incineration residues) are commonly disposed as landfill.Meanwhile,reclamation of landfill sites to create a new land space after their closure becomes an important goal in the current fewer and fewer land availability scenario in many narrow countries.The objective of this study is to reclaim incineration residue materials in the landfill site by using cement and coal fly ash as stabilizers aiming at performing quality check as new developed materials before future construction.Indeed,physical and mechanical properties of these new materials should be initially examined at the micro scale,which is the primary fundamental for construction at larger scale.This research examines quantitative influences of using the combination of cement and coal fly ash at different ratio on the internal structure and ability of strength enhancement of incineration residues when suffering from loading.Couple of industrial and micro-focus X-ray computed tomography (CT) scanners combined with an image analysis technique were utilized to characterize and visualize the behavior and internal structure of the incineration residues-cement-coal fly ash mixture under the series of unconfined compression test and curing period effect.Nine types of cement solidified incineration residues in term of different curing period (i.e.,7,14,28 days) and coal fly ash addition content (i.e.,0%,9%,18%) were scanned before and after unconfined compression tests.It was shown that incineration residues solidified by cement and coal fly ash showed an increase in compression strength and deformation modulus with curing time and coal fly ash content.Three-dimension computed tomography images observation and analysis confirmed that solidified incineration residues including incineration bottom and fly ash as well as cement and coal fly ash have the deliquescent materials.Then,it was studied that stabilized parts play a more important role than spatial void distribution in increment or reduction of compression strength.
文摘Dose estimation and quality control in computed tomography (CT) scanners are useful in controlling the dose of radiation given to patients while tests are carried out. The study was performed in a 16-slice Computed Tomography (CT) system of LightSpeed RT16 Xtra CT scanner. Quality control was done using a vendor-provided QA Phantom, and the six aspects of image quality were measured. For CT dosimetry, Computed Tomography Dose index volume (CTDIvol) was performed using Computed Tomography Dose Index (CTDI) Phantom. CTDI Phantom consists of three parts: Pediatric Head, Adult Head, and Adult Body Phantom. A 10 cm long pencil ion chamber DCT-10 was used to measure the dose at different positions inside the CTDI Phantom. Data were collected using MagicMax Universal software. For dose estimation of the CTDIvol Report of AAPM Task Group, 96 and 111 formalisms were used. For Pediatric Head, Adult Head, and Adult Body Phantom the measured CIDIvol was 61.04 mGy, 48.11 mGy, and 18.08 mGy respectively. The study has shown deviations of 7%, 15%, and 19% between estimated and console-displayed doses for Pediatric Head, Adult Head, and Adult Body scan techniques respectively. The six aspects of image quality measured by QA Phantom were found to be compatible with the specifications of the machine and CTDIvol measured by CTDI Phantom were found within a tolerance limit of ±20%. Hence, the QC and dosimetry of the mentioned machine are within the limit.
文摘Three-dimensional(3D)nanoprinting via two-photon polymerization offers unparalleled design flexibility and precision,thereby enabling rapid prototyping of advanced micro-optical elements and systems that have found important applications in endomicroscopy and biomedical imaging.The potential of this versatile tool for monolithic manufacturing of dynamic micro-opto-electro-mechanical systems(MOEMSs),however,has not yet been sufficiently explored.This work introduces a 3D-nanoprinted lens actuator with a large optical aperture,optimized for remote focusing in miniaturized imaging systems.The device integrates orthoplanar linear motion springs,a self-aligned sintered micro-magnet,and a monolithic lens,actuated by dual microcoils for uniaxial motion.The use of 3D nanoprinting allows complete design freedom for the integrated optical lens,whereas the monolithic fabrication ensures inherent alignment of the lens with the mechanical elements.With a lens diameter of 1.4 mm and a compact footprint of 5.74 mm,it achieves high mechanical robustness at resonant frequencies exceeding 300 Hz while still providing a large displacement range of 200μm(±100μm).A comprehensive analysis of optical and mechanical performance,including the effects of coil temperature and polymer viscoelasticity,demonstrates its advantages over conventional micro-electro-mechanical system actuators,showcasing its potential for next-generation imaging applications.
基金the National Natural Science Foundation of China(Grant No.42020104006).
文摘Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a processebased physical modeling of a pileereinforced reservoir landslide and present an improved deformation analysis involving large strains and water effects.We collect multieperiod point clouds using a terrain laser scanner and reconstruct its deformation field through a point cloud processing workflow.The results show that this method can accurately describe the landslide surface deformation at any time and area by both scalar and vector fields.The deformation fields in different profiles of the physical model and different stages of the evolutionary process provide adequate and detailed landslide information.We analyze the large strain upstream of the pile caused by the pile installation and the consequent violent deformation during the evolutionary process.Furthermore,our method effectively overcomes the challenges of identifying targets commonly encountered in geotechnical modeling where water effects are considered and targets are polluted,which facilitates the deformation analysis at the wading area in a reservoir landslide.Eventually,combining subsurface deformation as well as numerical modeling,we comprehensively analyze the kinematics and failure mechanisms of this complicated object involving landslides and pile foundations as well as water effects.This method is of great significance for any geotechnical modeling concerning large-strain analysis and water effects.
基金supported by the National Key Research and Development Program of China(Grant Nos.2021YFA1401900,2019YFA0308403,and 2018YFA0305604)the Innovation Program for Quantum Science and Technology(Grant Nos.2021ZD0302602 and 2021ZD0302403)+1 种基金the National Natural Science Foundation of China(Grant Nos.92065104,12074010,and 11888101)Capacity Building for Sci-Tech Innovation-Fundamental Scientific Research Funds(Grant Nos.20530290057 and KM202010028014)。
文摘Novel electron states stabilized by Coulomb interactions attract tremendous interests in condensed matter physics.These states are studied by corresponding phase transitions occurring at extreme conditions such as mK temperatures and high magnetic field.In this work,we introduce a magneto-optical Kerr effect measurement system to comprehensively explore these phases in addition to conventional transport measurement.This system,composed of an all-fiber zero-loop Sagnac interferometer and in situ piezo-scanner inside a dilution refrigerator,operates below 100 m K,with a maximum field of 12 Tesla and has a resolution as small as 0.2μrad.As a demonstration,we investigate TbMn_(6)Sn_(6),where the manganese atoms form Kagome lattice that hosts topological non-trivial Dirac cones.We observed two types of Kerr signals,stemming from its fully polarized ferromagnetic ground state and positive charged carriers within the Dirac-like dispersion.
基金the National Natural Science Foundation of China(Grant No.42020104006).
文摘Laser scanning technology has been widely used in landslide aspects.However,the existing deformation analysis based on terrain laser scanners can only provide limited information,which is insufficient for understanding landslide kinematics and failure mechanisms.To overcome this limitation,this paper proposes an automated method for processing point clouds collected in landslide physical modeling.This method allows the acquisition of quantitative three-dimensional(3D)deformation field information.The results show the organized and spatially related point cloud segmentation in terms of spherical targets.The segmented point clouds can be fitted to determine the locations of all preset targets and their corresponding location changes.The proposed method has been validated based on theoretical analysis and numerical and physical tests,which indicates that it can batch-process massive data sets with high computational efficiency and good noise resistance.Compared to existing methods,this method shows a significant potential for understanding landslide kinematics and failure mechanisms and advancing the application of 3D laser scanning in geotechnical modeling.
