We study projective synchronization with different scaling factors （PSDF） in N coupled chaotic systems networks. By using the adaptive linear control, some sufficient criteria for the PSDF in symmetrical and asymmet...We study projective synchronization with different scaling factors （PSDF） in N coupled chaotic systems networks. By using the adaptive linear control, some sufficient criteria for the PSDF in symmetrical and asymmetrical coupled networks are separately given based on the Lyapunov function method and the left eigenvalue theory. Numerical simulations for a generalized chaotic unified system are illustrated to verify the theoretical results.展开更多
In this paper, three existing source spectral models for stochastic finite-fault modeling of ground motion were reviewed. These three models were used to calculate the far-field received energy at a site from a vertic...In this paper, three existing source spectral models for stochastic finite-fault modeling of ground motion were reviewed. These three models were used to calculate the far-field received energy at a site from a vertical fault and the mean spectral ratio over 15 stations of the Northridge earthquake, and then compared. From the comparison, a necessary measure was observed to maintain the far-field received energy independent of subfault size and avoid overestimation of the long- period spectra/level. Two improvements were made to one of the three models （i.e., the model based on dynamic comer frequency） as follows： （i） a new method to compute the subfault comer frequency was proposed, where the subfault comer frequency is determined based on a basic value calculated from the total seismic moment of the entire fault and an increment depending on the seismic moment assigned to the subfault; and （ii） the difference of the radiation energy from each suhfault was considered into the scaling factor. The improved model was also compared with the unimproved model through the far-field received energy and the mean spectral ratio. The comparison proves that the improved model allows the received energy to be more independent of subfault size than the unimproved model, and decreases the overestimation degree of the long-period spectral amplitude.展开更多
In this paper, we investigate the weighted iterative decoding to improve the performance of turbo-polar code. First of all, a minimum weighted mean square error criterion is proposed to optimize the scaling factors(SF...In this paper, we investigate the weighted iterative decoding to improve the performance of turbo-polar code. First of all, a minimum weighted mean square error criterion is proposed to optimize the scaling factors(SFs). Secondly, for two typical iterative algorithms,such as soft cancellation(SCAN) and belief propagation(BP) decoding, genie-aided decoders are proposed as the ideal reference of the practical decoding. Guided by this optimization framework, the optimal SFs of SCAN or BP decoders are obtained. The bit error rate performance of turbo-polar code with the optimal SFs can achieve 0.3 dB or 0.7 dB performance gains over the standard SCAN or BP decoding respectively.展开更多
This study aimed to deal with three challenges:robustness,imperceptibility,and capacity in the image watermarking field.To reach a high capacity,a novel similarity-based edge detection algorithm was developed that fin...This study aimed to deal with three challenges:robustness,imperceptibility,and capacity in the image watermarking field.To reach a high capacity,a novel similarity-based edge detection algorithm was developed that finds more edge points than traditional techniques.The colored watermark image was created by inserting a randomly generated message on the edge points detected by this algorithm.To ensure robustness and imperceptibility,watermark and cover images were combined in the high-frequency subbands using Discrete Wavelet Transform and Singular Value Decomposition.In the watermarking stage,the watermark image was weighted by the adaptive scaling factor calculated by the standard deviation of the similarity image.According to the results,the proposed edge-based color image watermarking technique has achieved high payload capacity,imperceptibility,and robustness to all attacks.In addition,the highest performance values were obtained against rotation attack,to which sufficient robustness has not been reached in the related studies.展开更多
To increase the variety and security of communication, we present the definitions of modified projective synchronization with complex scaling factors （CMPS） of real chaotic systems and complex chaotic systems, where...To increase the variety and security of communication, we present the definitions of modified projective synchronization with complex scaling factors （CMPS） of real chaotic systems and complex chaotic systems, where complex scaling factors establish a link between real chaos and complex chaos. Considering all situations of unknown parameters and pseudo-gradient condition, we design adaptive CMPS schemes based on the speed-gradient method for the real drive chaotic system and complex response chaotic system and for the complex drive chaotic system and the real response chaotic system, respectively. The convergence factors and dynamical control strength are added to regulate the convergence speed and increase robustness. Numerical simulations verify the feasibility and effectiveness of the presented schemes.展开更多
Cuckoo search （CS）, inspired by the obligate brood parasitic behavior of some cuckoo species, iteratively uses L6vy flights random walk （LFRW） and biased/selective random walk （BSRW） to search for new solutions....Cuckoo search （CS）, inspired by the obligate brood parasitic behavior of some cuckoo species, iteratively uses L6vy flights random walk （LFRW） and biased/selective random walk （BSRW） to search for new solutions. In this study, we seek a simple strategy to set the scaling factor in LFRW, which can vary the scaling factor to achieve better performance. However, choosing the best scaling factor for each problem is intractable. Thus, we propose a varied scal- ing factor （VSF） strategy that samples a value from the range [0,1] uniformly at random for each iteration. In addition, we integrate the VSF strategy into several advanced CS vari- ants. Extensive experiments are conducted on three groups of benchmark functions including 18 common test functions, 25 functions proposed in CEC 2005, and 28 functions intro- duced in CEC 2013. Experimental results demonstrate the ef- fectiveness of the VSF strategy.展开更多
This paper compared two soil moisture downscaling methods using three scaling factors.Level 3 soil moisture product of advanced microwave scanning radiometer for EOS(AMSR-E)is downscaled from 25 to 1 km.The downscaled...This paper compared two soil moisture downscaling methods using three scaling factors.Level 3 soil moisture product of advanced microwave scanning radiometer for EOS(AMSR-E)is downscaled from 25 to 1 km.The downscaled results are compared with the soil moisture observations from polarimetric scanning radiometer(PSR)microwave radiometer and field sampling.The results show that(1)the scaling factor of normalized soil thermal inertia(NSTIs)and vegetation temperature condition index(VTCI)are better than soil evaporative efficiency in reflecting soil moisture;(2)for method 1,NSTIS is the best in the downscaling of soil moisture.For method 2,VTCI is the best;(3)no significant differences of the correlation coefficients(R2)and the biases were found between the two methods for the same scaling factors.However,method 2 shows a better potential than method 1 in the time-series applications of the downscaling of soil moisture;(4)compared with the relationship between the area-averaged soil moisture of AMSR-E and that of PSR,R2 of the 6 sets of the downscaled soil moisture almost do not decrease,which suggests the validity of the downscaling of soil moisture with the two downscaling methods using the three scaling factors.展开更多
The subgrade soil scaling factor （SSSF） shows the basic properties of soil such as stiffness, gravimetry, density, and particle distribution, which are essential for disaster prediction and geotechnical engineering ...The subgrade soil scaling factor （SSSF） shows the basic properties of soil such as stiffness, gravimetry, density, and particle distribution, which are essential for disaster prediction and geotechnical engineering activities. In this paper, methods used for soil properties analysis are firstly summarized, and then a fiber Bragg grating （FBG） sensing technology is introduced. In order to acquire the properties and mechanical characteristics of soil accurately, a vibration-based method is presented, and an experiment for judging the properties of soil is conducted. As for the experiment, an FBG sensor is adhered to the upside of the vibration rod to measure its fundamental frequency. The rod vibrates freely at different-depth level of soil, and the changed data of wavelength from the FBG sensor are carefully collected. The Winkler spring model is used to analyze the relationship between the fundamental frequency and stiffness of soil. The results of this experiment suggest that data collected from FBG sensor can reflect vibration situation clearly and quantitatively. Thus the SSSF value can be calculated from the frequency-stiffness equation. The experimental results are almost identical with the theoretical derivation results. This confirms that the method presented in the paper can determine the SSSF effectively.展开更多
Multifdelity surrogates(MFSs)replace computationally intensive models by synergistically combining information from diferent fdelity data with a signifcant improvement in modeling efciency.In this paper,a modifed MFS(...Multifdelity surrogates(MFSs)replace computationally intensive models by synergistically combining information from diferent fdelity data with a signifcant improvement in modeling efciency.In this paper,a modifed MFS(MMFS)model based on a radial basis function(RBF)is proposed,in which two fdelities of information can be analyzed by adaptively obtaining the scale factor.In the MMFS,an RBF was employed to establish the low-fdelity model.The correlation matrix of the high-fdelity samples and corresponding low-fdelity responses were integrated into an expansion matrix to determine the scaling function parameters.The shape parameters of the basis function were optimized by minimizing the leave-one-out cross-validation error of the high-fdelity sample points.The performance of the MMFS was compared with those of other MFS models(MFS-RBF and cooperative RBF)and single-fdelity RBF using four benchmark test functions,by which the impacts of diferent high-fdelity sample sizes on the prediction accuracy were also analyzed.The sensitivity of the MMFS model to the randomness of the design of experiments(DoE)was investigated by repeating sampling plans with 20 diferent DoEs.Stress analysis of the steel plate is presented to highlight the prediction ability of the proposed MMFS model.This research proposes a new multifdelity modeling method that can fully use two fdelity sample sets,rapidly calculate model parameters,and exhibit good prediction accuracy and robustness.展开更多
In order to suppress the influence of temperature changes on the performance of accelerometers,a digital quartz resonant accelerometer with low temperature drift is developed using a quartz resonator cluster as a tran...In order to suppress the influence of temperature changes on the performance of accelerometers,a digital quartz resonant accelerometer with low temperature drift is developed using a quartz resonator cluster as a transducer element.In addition,a digital intellectual property(IP) is designed in FPGA to achieve signal processing and fusion of integrated resonators.A testing system for digital quartz resonant accelerometers is established to characterize the performance under different conditions.The scale factor of the accelerometer prototype reaches 3561.63 Hz/g in the range of -1 g to +1 g,and 3542.5 Hz/g in the range of-10 g to+10 g.In different measurement ranges,the linear correlation coefficient R~2 of the accelerometer achieves greater than 0.998.The temperature drift of the accelerometer prototype is tested using a constant temperature test chamber,with a temperature change from -20℃ to 80℃.After temperature-drift compensation,the zero bias temperature coefficient falls to 0.08 mg/℃,and the scale factor temperature coefficient is 65.43 ppm/℃.The experimental results show that the digital quartz resonant accelerometer exhibits excellent sensitivity and low temperature drift.展开更多
To overcome the drawbacks such as irregular circuit construction and low system throughput that exist in conventional methods, a new factor correction scheme for coordinate rotation digital computer（ CORDIC） algorit...To overcome the drawbacks such as irregular circuit construction and low system throughput that exist in conventional methods, a new factor correction scheme for coordinate rotation digital computer（ CORDIC） algorithm is proposed. Based on the relationship between the iteration formulae, a new iteration formula is introduced, which leads the correction operation to be several simple shifting and adding operations. As one key part, the effects caused by rounding error are analyzed mathematically and it is concluded that the effects can be degraded by an appropriate selection of coefficients in the iteration formula. The model is then set up in Matlab and coded in Verilog HDL language. The proposed algorithm is also synthesized and verified in field-programmable gate array （FPGA）. The results show that this new scheme requires only one additional clock cycle and there is no change in the elementary iteration for the same precision compared with the conventional algorithm. In addition, the circuit realization is regular and the change in system throughput is very minimal.展开更多
In order to analyze the effect of wavelength-dependent radiation-induced attenuation （RIA） on the mean trans- mission wavelength in optical fiber and the scale factor of interferometric fiber optic gyroscopes （IFOG...In order to analyze the effect of wavelength-dependent radiation-induced attenuation （RIA） on the mean trans- mission wavelength in optical fiber and the scale factor of interferometric fiber optic gyroscopes （IFOGs）, three types of polarization-maintaining （PM） fibers are tested by using a 60Co γ-radiation source. The observed different mean wave- length shift （MWS） behaviors for different fibers are interpreted by color-center theory involving dose rate-dependent absorption bands in ultraviolet and visible ranges and total dose-dependent near-infrared absorption bands. To evaluate the mean wavelength variation in a fiber coil and the induced scale factor change for space-borne IFOGs under low radiation doses in a space environment, the influence of dose rate on the mean wavelength is investigated by testing four germanium （Ge） doped fibers and two germanium-phosphorus （Ge-P） codoped fibers irradiated at different dose rates. Experimental results indicate that the Ge-doped fibers show the least mean wavelength shift during irradiation and their mean wavelength of optical signal transmission in fibers will shift to a shorter wavelength in a low-dose-rate radiation environment. Finally, the change in the scale factor of IFOG resulting from the mean wavelength shift is estimated and tested, and it is found that the significant radiation-induced scale factor variation must be considered during the design of space-borne IFOGs.展开更多
This paper explains that the terms“horizontal and vertical scales”are not appropriate in map projections theory.Instead,the authors suggest using the term“scales in the direction of coordinate axes.”Since it is no...This paper explains that the terms“horizontal and vertical scales”are not appropriate in map projections theory.Instead,the authors suggest using the term“scales in the direction of coordinate axes.”Since it is not possible to read a local linear scale factor in the direction of a coordinate axis immediately from the definition of a local linear scale factor,this paper considers the derivation of new formulae that enable local linear scale factors in the direction of coordinate x and y axes to be calculated.The formula for computing the local linear scale factor in any direction defined by dx and dy is also derived.Furthermore,the position and magnitude of the extreme values of the local linear scale factor are considered and new formulas derived.展开更多
Estimation of random errors, which are due to shot noise of photomultiplier tube(PMT) or avalanche photodiode(APD) detectors, is very necessary in lidar observation. Due to the Poisson distribution of incident electro...Estimation of random errors, which are due to shot noise of photomultiplier tube(PMT) or avalanche photodiode(APD) detectors, is very necessary in lidar observation. Due to the Poisson distribution of incident electrons, there still exists a proportional relationship between standard deviation and square root of its mean value. Based on this relationship,noise scale factor(NSF) is introduced into the estimation, which only needs a single data sample. This method overcomes the distractions of atmospheric fluctuations during calculation of random errors. The results show that this method is feasible and reliable.展开更多
Positron emission tomography （PET） imaging of functional metabolism has been widely used to investigate functional recovery and to evaluate therapeutic efficacy after stroke. The voxel intensity of a PET image is th...Positron emission tomography （PET） imaging of functional metabolism has been widely used to investigate functional recovery and to evaluate therapeutic efficacy after stroke. The voxel intensity of a PET image is the most important indicator of cellular activity, but is affected by other factors such as the basal metabolic ratio of each subject. In order to locate dysfunctional regions accurately, intensity normalization by a scale factor is a prerequisite in the data analysis, for which the global mean value is most widely used. However, this is unsuitable for stroke studies. Alternatively, a specified scale factor calculated from a reference region is also used, comprising neither hyper- nor hypo-metabolic voxels. But there is no such recognized reference region for stroke studies. Therefore, we proposed a totally data-driven automatic method for unbiased scale factor generation. This factor was generated iteratively until the residual deviation of two adjacent scale factors was reduced by 〈 5%. Moreover, both simulated and real stroke data were used for evaluation, and these suggested that our proposed unbiased scale factor has better sensi- tivity and accuracy for stroke studies.展开更多
The Bayesian Multi-Fidelity Surrogate(MFS)proposed by Kennedy and O’Hagan(KOH model)has been widely employed in engineering design,which builds the approximation by decomposing the high-fidelity function into a scale...The Bayesian Multi-Fidelity Surrogate(MFS)proposed by Kennedy and O’Hagan(KOH model)has been widely employed in engineering design,which builds the approximation by decomposing the high-fidelity function into a scaled low-fidelity model plus a discrepancy function.The scale factor before the low-fidelity function,ρ,plays a crucial role in the KOH model.This scale factor is always tuned by the Maximum Likelihood Estimation(MLE).However,recent studies reported that the MLE may sometimes result in MFS of bad accuracy.In this paper,we first present a detailed analysis of why MLE sometimes can lead to MFS of bad accuracy.This is because,the MLE overly emphasizes the variation of discrepancy function but ignores the function waviness when selectingρ.To address the above issue,we propose an alternative approach that choosesρby minimizing the posterior variance of the discrepancy function.Through tests on a one-dimensional function,two high-dimensional functions,and a turbine blade design problem,the proposed approach shows better accuracy than or comparable accuracy to MLE,and the proposed approach is more robust than MLE.Additionally,through a comparative test on the design optimization of a turbine endwall cooling layout,the advantage of the proposed approach is further validated.展开更多
Considering that the hardware implementation of the normalized minimum sum(NMS)decoding algorithm for low-density parity-check(LDPC)code is difficult due to the uncertainty of scale factor,an NMS decoding algorithm wi...Considering that the hardware implementation of the normalized minimum sum(NMS)decoding algorithm for low-density parity-check(LDPC)code is difficult due to the uncertainty of scale factor,an NMS decoding algorithm with variable scale factor is proposed for the near-earth space LDPC codes(8177,7154)in the consultative committee for space data systems(CCSDS)standard.The shift characteristics of field programmable gate array(FPGA)is used to optimize the quantization data of check nodes,and finally the function of LDPC decoder is realized.The simulation and experimental results show that the designed FPGA-based LDPC decoder adopts the scaling factor in the NMS decoding algorithm to improve the decoding performance,simplify the hardware structure,accelerate the convergence speed and improve the error correction ability.展开更多
Using a Linde reference, as well as another one from Padmanabhan for calculation of how the early universe expands, we obtain, by default the coefficient of scale factor expansion, t to the alpha value, with alpha bei...Using a Linde reference, as well as another one from Padmanabhan for calculation of how the early universe expands, we obtain, by default the coefficient of scale factor expansion, t to the alpha value, with alpha being approximately the square root of five in value. We from there make an estimate as to the number of initial particles produced in the very beginning, which leads us to conclude that a graviton, would be a preferred initial by product. The argument as to gravitons, also reflects a choice of how the decay of initial BEC condensates of Planck sized black holes would commence, using the work produced by Chavanis, as to BEC condensates and black holes. The object will be to obtain initial frequency spread plus strength of GW production plus a suggestion as to what polarization state may be accessible from initial conditions.展开更多
One of the crucial and challenging issues for researchers is presenting an appropriate approach to evaluate the aerodynamic characteristics of air cushion vehicles(ACVs)in terms of system design parameters.One of thes...One of the crucial and challenging issues for researchers is presenting an appropriate approach to evaluate the aerodynamic characteristics of air cushion vehicles(ACVs)in terms of system design parameters.One of these issues includes introducing a suitable approach to analyze the effect of geometric shapes on the aerodynamic characteristics of ACVs.The main novelty of this paper lies in presenting an innovative method to study the geometric shape effect on air cushion lift force,which has not been investigated thus far.Moreover,this paper introduces a new approximate mathematical formula for calculating the air cushion lift force in terms of parameters,including the air gap,lateral gaps,air inlet velocity,and scaling factor for the first time.Thus,we calculate the aerodynamic lift force applied to nine different shapes of the air cushions used in the ACVs in the present paper through the ANSYS Fluent software.The geometrical shapes studied in this paper are rectangular,square,equilateral triangle,circular,elliptic shapes,and four other combined shapes,including circle-rectangle,circle-square,hexagonal,and fillet square.Results showed that the cushion with a circular pattern produces the highest lift force among other geometric shapes with the same conditions.The increase in the cushion lift force can be attributed to the fillet with a square shape and its increasing radius compared with the square shape.展开更多
Accurate engine performance models are important for model-based performance evaluation of aero engine.The accuracy of the model often depends on engine component maps,so there is a need for a method that can accurate...Accurate engine performance models are important for model-based performance evaluation of aero engine.The accuracy of the model often depends on engine component maps,so there is a need for a method that can accurately correct the component maps of the model over a wide range.In this paper,a new method for modifying component maps is proposed,this method combines the correction of the scaling factors with the solution process of the off-design working point,and uses the adjustment of the variable geometric parameters of the engine to change the position of the working line,in order to obtain more correction results and guarantee high accuracy in a wider range.The method is validated by taking the main fan of the Adaptive Cycle Engine(ACE),an ideal power unit for a new generation of multi-purpose and ultra-wide working range aircraft,as an example.The results show that the maximum error between the corrected component maps and the target maps is less than 1%.New possibility for more precise component maps can be realized in this paper.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No 60575038)
文摘We study projective synchronization with different scaling factors （PSDF） in N coupled chaotic systems networks. By using the adaptive linear control, some sufficient criteria for the PSDF in symmetrical and asymmetrical coupled networks are separately given based on the Lyapunov function method and the left eigenvalue theory. Numerical simulations for a generalized chaotic unified system are illustrated to verify the theoretical results.
基金National Natural Science Foundation of China Under Grant No. 50778058 and 90715038National Key Technology R&D Program Under Contract No. 2006BAC13B02
文摘In this paper, three existing source spectral models for stochastic finite-fault modeling of ground motion were reviewed. These three models were used to calculate the far-field received energy at a site from a vertical fault and the mean spectral ratio over 15 stations of the Northridge earthquake, and then compared. From the comparison, a necessary measure was observed to maintain the far-field received energy independent of subfault size and avoid overestimation of the long- period spectra/level. Two improvements were made to one of the three models （i.e., the model based on dynamic comer frequency） as follows： （i） a new method to compute the subfault comer frequency was proposed, where the subfault comer frequency is determined based on a basic value calculated from the total seismic moment of the entire fault and an increment depending on the seismic moment assigned to the subfault; and （ii） the difference of the radiation energy from each suhfault was considered into the scaling factor. The improved model was also compared with the unimproved model through the far-field received energy and the mean spectral ratio. The comparison proves that the improved model allows the received energy to be more independent of subfault size than the unimproved model, and decreases the overestimation degree of the long-period spectral amplitude.
基金supported by the National Natural Science Foundation of China(No.61671080)the National Natural Science Foundation of China(No.61771066)Nokia Beijing Bell Lab
文摘In this paper, we investigate the weighted iterative decoding to improve the performance of turbo-polar code. First of all, a minimum weighted mean square error criterion is proposed to optimize the scaling factors(SFs). Secondly, for two typical iterative algorithms,such as soft cancellation(SCAN) and belief propagation(BP) decoding, genie-aided decoders are proposed as the ideal reference of the practical decoding. Guided by this optimization framework, the optimal SFs of SCAN or BP decoders are obtained. The bit error rate performance of turbo-polar code with the optimal SFs can achieve 0.3 dB or 0.7 dB performance gains over the standard SCAN or BP decoding respectively.
文摘This study aimed to deal with three challenges:robustness,imperceptibility,and capacity in the image watermarking field.To reach a high capacity,a novel similarity-based edge detection algorithm was developed that finds more edge points than traditional techniques.The colored watermark image was created by inserting a randomly generated message on the edge points detected by this algorithm.To ensure robustness and imperceptibility,watermark and cover images were combined in the high-frequency subbands using Discrete Wavelet Transform and Singular Value Decomposition.In the watermarking stage,the watermark image was weighted by the adaptive scaling factor calculated by the standard deviation of the similarity image.According to the results,the proposed edge-based color image watermarking technique has achieved high payload capacity,imperceptibility,and robustness to all attacks.In addition,the highest performance values were obtained against rotation attack,to which sufficient robustness has not been reached in the related studies.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61273088,10971120,and 61001099)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2010FM010)
文摘To increase the variety and security of communication, we present the definitions of modified projective synchronization with complex scaling factors （CMPS） of real chaotic systems and complex chaotic systems, where complex scaling factors establish a link between real chaos and complex chaos. Considering all situations of unknown parameters and pseudo-gradient condition, we design adaptive CMPS schemes based on the speed-gradient method for the real drive chaotic system and complex response chaotic system and for the complex drive chaotic system and the real response chaotic system, respectively. The convergence factors and dynamical control strength are added to regulate the convergence speed and increase robustness. Numerical simulations verify the feasibility and effectiveness of the presented schemes.
文摘Cuckoo search （CS）, inspired by the obligate brood parasitic behavior of some cuckoo species, iteratively uses L6vy flights random walk （LFRW） and biased/selective random walk （BSRW） to search for new solutions. In this study, we seek a simple strategy to set the scaling factor in LFRW, which can vary the scaling factor to achieve better performance. However, choosing the best scaling factor for each problem is intractable. Thus, we propose a varied scal- ing factor （VSF） strategy that samples a value from the range [0,1] uniformly at random for each iteration. In addition, we integrate the VSF strategy into several advanced CS vari- ants. Extensive experiments are conducted on three groups of benchmark functions including 18 common test functions, 25 functions proposed in CEC 2005, and 28 functions intro- duced in CEC 2013. Experimental results demonstrate the ef- fectiveness of the VSF strategy.
基金the National Natural Science Foundation of China(41671354)the National Key Research and Development Plan(2016YFA0602501).
文摘This paper compared two soil moisture downscaling methods using three scaling factors.Level 3 soil moisture product of advanced microwave scanning radiometer for EOS(AMSR-E)is downscaled from 25 to 1 km.The downscaled results are compared with the soil moisture observations from polarimetric scanning radiometer(PSR)microwave radiometer and field sampling.The results show that(1)the scaling factor of normalized soil thermal inertia(NSTIs)and vegetation temperature condition index(VTCI)are better than soil evaporative efficiency in reflecting soil moisture;(2)for method 1,NSTIS is the best in the downscaling of soil moisture.For method 2,VTCI is the best;(3)no significant differences of the correlation coefficients(R2)and the biases were found between the two methods for the same scaling factors.However,method 2 shows a better potential than method 1 in the time-series applications of the downscaling of soil moisture;(4)compared with the relationship between the area-averaged soil moisture of AMSR-E and that of PSR,R2 of the 6 sets of the downscaled soil moisture almost do not decrease,which suggests the validity of the downscaling of soil moisture with the two downscaling methods using the three scaling factors.
文摘The subgrade soil scaling factor （SSSF） shows the basic properties of soil such as stiffness, gravimetry, density, and particle distribution, which are essential for disaster prediction and geotechnical engineering activities. In this paper, methods used for soil properties analysis are firstly summarized, and then a fiber Bragg grating （FBG） sensing technology is introduced. In order to acquire the properties and mechanical characteristics of soil accurately, a vibration-based method is presented, and an experiment for judging the properties of soil is conducted. As for the experiment, an FBG sensor is adhered to the upside of the vibration rod to measure its fundamental frequency. The rod vibrates freely at different-depth level of soil, and the changed data of wavelength from the FBG sensor are carefully collected. The Winkler spring model is used to analyze the relationship between the fundamental frequency and stiffness of soil. The results of this experiment suggest that data collected from FBG sensor can reflect vibration situation clearly and quantitatively. Thus the SSSF value can be calculated from the frequency-stiffness equation. The experimental results are almost identical with the theoretical derivation results. This confirms that the method presented in the paper can determine the SSSF effectively.
基金Supported by National Key R&D Program of China(Grant No.2018YFB1700704).
文摘Multifdelity surrogates(MFSs)replace computationally intensive models by synergistically combining information from diferent fdelity data with a signifcant improvement in modeling efciency.In this paper,a modifed MFS(MMFS)model based on a radial basis function(RBF)is proposed,in which two fdelities of information can be analyzed by adaptively obtaining the scale factor.In the MMFS,an RBF was employed to establish the low-fdelity model.The correlation matrix of the high-fdelity samples and corresponding low-fdelity responses were integrated into an expansion matrix to determine the scaling function parameters.The shape parameters of the basis function were optimized by minimizing the leave-one-out cross-validation error of the high-fdelity sample points.The performance of the MMFS was compared with those of other MFS models(MFS-RBF and cooperative RBF)and single-fdelity RBF using four benchmark test functions,by which the impacts of diferent high-fdelity sample sizes on the prediction accuracy were also analyzed.The sensitivity of the MMFS model to the randomness of the design of experiments(DoE)was investigated by repeating sampling plans with 20 diferent DoEs.Stress analysis of the steel plate is presented to highlight the prediction ability of the proposed MMFS model.This research proposes a new multifdelity modeling method that can fully use two fdelity sample sets,rapidly calculate model parameters,and exhibit good prediction accuracy and robustness.
文摘In order to suppress the influence of temperature changes on the performance of accelerometers,a digital quartz resonant accelerometer with low temperature drift is developed using a quartz resonator cluster as a transducer element.In addition,a digital intellectual property(IP) is designed in FPGA to achieve signal processing and fusion of integrated resonators.A testing system for digital quartz resonant accelerometers is established to characterize the performance under different conditions.The scale factor of the accelerometer prototype reaches 3561.63 Hz/g in the range of -1 g to +1 g,and 3542.5 Hz/g in the range of-10 g to+10 g.In different measurement ranges,the linear correlation coefficient R~2 of the accelerometer achieves greater than 0.998.The temperature drift of the accelerometer prototype is tested using a constant temperature test chamber,with a temperature change from -20℃ to 80℃.After temperature-drift compensation,the zero bias temperature coefficient falls to 0.08 mg/℃,and the scale factor temperature coefficient is 65.43 ppm/℃.The experimental results show that the digital quartz resonant accelerometer exhibits excellent sensitivity and low temperature drift.
基金The National High Technology Research and Development Program of China (863 Program)(No.2007AA01Z280)
文摘To overcome the drawbacks such as irregular circuit construction and low system throughput that exist in conventional methods, a new factor correction scheme for coordinate rotation digital computer（ CORDIC） algorithm is proposed. Based on the relationship between the iteration formulae, a new iteration formula is introduced, which leads the correction operation to be several simple shifting and adding operations. As one key part, the effects caused by rounding error are analyzed mathematically and it is concluded that the effects can be degraded by an appropriate selection of coefficients in the iteration formula. The model is then set up in Matlab and coded in Verilog HDL language. The proposed algorithm is also synthesized and verified in field-programmable gate array （FPGA）. The results show that this new scheme requires only one additional clock cycle and there is no change in the elementary iteration for the same precision compared with the conventional algorithm. In addition, the circuit realization is regular and the change in system throughput is very minimal.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61007040)
文摘In order to analyze the effect of wavelength-dependent radiation-induced attenuation （RIA） on the mean trans- mission wavelength in optical fiber and the scale factor of interferometric fiber optic gyroscopes （IFOGs）, three types of polarization-maintaining （PM） fibers are tested by using a 60Co γ-radiation source. The observed different mean wave- length shift （MWS） behaviors for different fibers are interpreted by color-center theory involving dose rate-dependent absorption bands in ultraviolet and visible ranges and total dose-dependent near-infrared absorption bands. To evaluate the mean wavelength variation in a fiber coil and the induced scale factor change for space-borne IFOGs under low radiation doses in a space environment, the influence of dose rate on the mean wavelength is investigated by testing four germanium （Ge） doped fibers and two germanium-phosphorus （Ge-P） codoped fibers irradiated at different dose rates. Experimental results indicate that the Ge-doped fibers show the least mean wavelength shift during irradiation and their mean wavelength of optical signal transmission in fibers will shift to a shorter wavelength in a low-dose-rate radiation environment. Finally, the change in the scale factor of IFOG resulting from the mean wavelength shift is estimated and tested, and it is found that the significant radiation-induced scale factor variation must be considered during the design of space-borne IFOGs.
文摘This paper explains that the terms“horizontal and vertical scales”are not appropriate in map projections theory.Instead,the authors suggest using the term“scales in the direction of coordinate axes.”Since it is not possible to read a local linear scale factor in the direction of a coordinate axis immediately from the definition of a local linear scale factor,this paper considers the derivation of new formulae that enable local linear scale factors in the direction of coordinate x and y axes to be calculated.The formula for computing the local linear scale factor in any direction defined by dx and dy is also derived.Furthermore,the position and magnitude of the extreme values of the local linear scale factor are considered and new formulas derived.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB05040300)the National Natural Science Foundation of China(Grant No.41205119)
文摘Estimation of random errors, which are due to shot noise of photomultiplier tube(PMT) or avalanche photodiode(APD) detectors, is very necessary in lidar observation. Due to the Poisson distribution of incident electrons, there still exists a proportional relationship between standard deviation and square root of its mean value. Based on this relationship,noise scale factor(NSF) is introduced into the estimation, which only needs a single data sample. This method overcomes the distractions of atmospheric fluctuations during calculation of random errors. The results show that this method is feasible and reliable.
基金supported by the National Natural Science Foundation of China(81471741,81471728,and81671770)
文摘Positron emission tomography （PET） imaging of functional metabolism has been widely used to investigate functional recovery and to evaluate therapeutic efficacy after stroke. The voxel intensity of a PET image is the most important indicator of cellular activity, but is affected by other factors such as the basal metabolic ratio of each subject. In order to locate dysfunctional regions accurately, intensity normalization by a scale factor is a prerequisite in the data analysis, for which the global mean value is most widely used. However, this is unsuitable for stroke studies. Alternatively, a specified scale factor calculated from a reference region is also used, comprising neither hyper- nor hypo-metabolic voxels. But there is no such recognized reference region for stroke studies. Therefore, we proposed a totally data-driven automatic method for unbiased scale factor generation. This factor was generated iteratively until the residual deviation of two adjacent scale factors was reduced by 〈 5%. Moreover, both simulated and real stroke data were used for evaluation, and these suggested that our proposed unbiased scale factor has better sensi- tivity and accuracy for stroke studies.
基金the financial support from the National Science and Technology Major Project,China(No.2019-Ⅱ-0008-0028)Key Program of National Natural Science Foundation of China(No.51936008)。
文摘The Bayesian Multi-Fidelity Surrogate(MFS)proposed by Kennedy and O’Hagan(KOH model)has been widely employed in engineering design,which builds the approximation by decomposing the high-fidelity function into a scaled low-fidelity model plus a discrepancy function.The scale factor before the low-fidelity function,ρ,plays a crucial role in the KOH model.This scale factor is always tuned by the Maximum Likelihood Estimation(MLE).However,recent studies reported that the MLE may sometimes result in MFS of bad accuracy.In this paper,we first present a detailed analysis of why MLE sometimes can lead to MFS of bad accuracy.This is because,the MLE overly emphasizes the variation of discrepancy function but ignores the function waviness when selectingρ.To address the above issue,we propose an alternative approach that choosesρby minimizing the posterior variance of the discrepancy function.Through tests on a one-dimensional function,two high-dimensional functions,and a turbine blade design problem,the proposed approach shows better accuracy than or comparable accuracy to MLE,and the proposed approach is more robust than MLE.Additionally,through a comparative test on the design optimization of a turbine endwall cooling layout,the advantage of the proposed approach is further validated.
文摘Considering that the hardware implementation of the normalized minimum sum(NMS)decoding algorithm for low-density parity-check(LDPC)code is difficult due to the uncertainty of scale factor,an NMS decoding algorithm with variable scale factor is proposed for the near-earth space LDPC codes(8177,7154)in the consultative committee for space data systems(CCSDS)standard.The shift characteristics of field programmable gate array(FPGA)is used to optimize the quantization data of check nodes,and finally the function of LDPC decoder is realized.The simulation and experimental results show that the designed FPGA-based LDPC decoder adopts the scaling factor in the NMS decoding algorithm to improve the decoding performance,simplify the hardware structure,accelerate the convergence speed and improve the error correction ability.
文摘Using a Linde reference, as well as another one from Padmanabhan for calculation of how the early universe expands, we obtain, by default the coefficient of scale factor expansion, t to the alpha value, with alpha being approximately the square root of five in value. We from there make an estimate as to the number of initial particles produced in the very beginning, which leads us to conclude that a graviton, would be a preferred initial by product. The argument as to gravitons, also reflects a choice of how the decay of initial BEC condensates of Planck sized black holes would commence, using the work produced by Chavanis, as to BEC condensates and black holes. The object will be to obtain initial frequency spread plus strength of GW production plus a suggestion as to what polarization state may be accessible from initial conditions.
文摘One of the crucial and challenging issues for researchers is presenting an appropriate approach to evaluate the aerodynamic characteristics of air cushion vehicles(ACVs)in terms of system design parameters.One of these issues includes introducing a suitable approach to analyze the effect of geometric shapes on the aerodynamic characteristics of ACVs.The main novelty of this paper lies in presenting an innovative method to study the geometric shape effect on air cushion lift force,which has not been investigated thus far.Moreover,this paper introduces a new approximate mathematical formula for calculating the air cushion lift force in terms of parameters,including the air gap,lateral gaps,air inlet velocity,and scaling factor for the first time.Thus,we calculate the aerodynamic lift force applied to nine different shapes of the air cushions used in the ACVs in the present paper through the ANSYS Fluent software.The geometrical shapes studied in this paper are rectangular,square,equilateral triangle,circular,elliptic shapes,and four other combined shapes,including circle-rectangle,circle-square,hexagonal,and fillet square.Results showed that the cushion with a circular pattern produces the highest lift force among other geometric shapes with the same conditions.The increase in the cushion lift force can be attributed to the fillet with a square shape and its increasing radius compared with the square shape.
基金funded by National Nature Science Foundation of China(NSFC)(Nos.51776010,and 91860205)the support from Collaborative Innovation Center of Advanced Aero-Engine,china。
文摘Accurate engine performance models are important for model-based performance evaluation of aero engine.The accuracy of the model often depends on engine component maps,so there is a need for a method that can accurately correct the component maps of the model over a wide range.In this paper,a new method for modifying component maps is proposed,this method combines the correction of the scaling factors with the solution process of the off-design working point,and uses the adjustment of the variable geometric parameters of the engine to change the position of the working line,in order to obtain more correction results and guarantee high accuracy in a wider range.The method is validated by taking the main fan of the Adaptive Cycle Engine(ACE),an ideal power unit for a new generation of multi-purpose and ultra-wide working range aircraft,as an example.The results show that the maximum error between the corrected component maps and the target maps is less than 1%.New possibility for more precise component maps can be realized in this paper.
