To improve the processability and mechanical properties of the selective laser melting(SLM)low Sc content Al−Mg−Sc−Zr alloy,Mn was used to partially replace Mg.The processability,microstructure,and mechanical properti...To improve the processability and mechanical properties of the selective laser melting(SLM)low Sc content Al−Mg−Sc−Zr alloy,Mn was used to partially replace Mg.The processability,microstructure,and mechanical properties of the SLM-fabricated Al−Mg−Mn−Sc−Zr alloy were systematically investigated by density measurement,microstructure characterization,and tensile testing.The results revealed that dense samples could be obtained by adjusting the SLM process parameters.The alloy exhibited a fine equiaxed-columnar bimodal grain microstructure.The presence of primary Al3Sc andα-Al(Mn,Fe)Si particles contributed to the grain refinement of the alloy with an average grain size of 4.63μm.Upon aging treatment at 350°C for 2 h,the strength and elongation of the alloy were simultaneously improved due to the precipitation of Al3Sc nanoparticles and the formation of the 9R phase.This study demonstrates that the strength−plasticity trade-off of the aluminum alloy can be overcome by utilizing SLM technology and subsequent post-heat treatment to induce the formation of the long-period stacked ordered phase.展开更多
土壤参数是地表径流模型中的关键参数,对径流过程模拟有重要影响,因此有必要明确土壤参数的作用机制。论文结合SWAT(Soil and Water Assessment Tool)模型,以广泛应用的径流曲线数模型(SCS-CN)为例,对土壤参数在SCS-CN模型中的作用进行...土壤参数是地表径流模型中的关键参数,对径流过程模拟有重要影响,因此有必要明确土壤参数的作用机制。论文结合SWAT(Soil and Water Assessment Tool)模型,以广泛应用的径流曲线数模型(SCS-CN)为例,对土壤参数在SCS-CN模型中的作用进行了理论推导、分析和实例研究。分析表明,土壤饱和含水量参数与田间持水量参数的比值,是影响不同土壤湿度下地表产流能力的重要因素,两者比值越大,土壤含水量对地表产流能力的调节越弱,导致基于不同土壤模拟的地表径流量随土壤湿度的波动而上下反转。以实际流域为例,发现不同土壤数据模拟地表径流间差别的显著季节性特征;阐明该差别季节性变化的内在机制,验证了理论分析结论。为深入理解产流过程、合理选择土壤数据、模型参数优化及模拟结果解释提供了参考。展开更多
基金supported by the National Natural Science Foundation of China(Nos.51801079,52001140)the National Funds Through FCT of Portugal–Fundacao para a Ciência e a Tecnologia,under a scientific contract of 2021.04115.CEECIND,and the Projects of UIDB/00285/2020,and LA/0112/2020。
文摘To improve the processability and mechanical properties of the selective laser melting(SLM)low Sc content Al−Mg−Sc−Zr alloy,Mn was used to partially replace Mg.The processability,microstructure,and mechanical properties of the SLM-fabricated Al−Mg−Mn−Sc−Zr alloy were systematically investigated by density measurement,microstructure characterization,and tensile testing.The results revealed that dense samples could be obtained by adjusting the SLM process parameters.The alloy exhibited a fine equiaxed-columnar bimodal grain microstructure.The presence of primary Al3Sc andα-Al(Mn,Fe)Si particles contributed to the grain refinement of the alloy with an average grain size of 4.63μm.Upon aging treatment at 350°C for 2 h,the strength and elongation of the alloy were simultaneously improved due to the precipitation of Al3Sc nanoparticles and the formation of the 9R phase.This study demonstrates that the strength−plasticity trade-off of the aluminum alloy can be overcome by utilizing SLM technology and subsequent post-heat treatment to induce the formation of the long-period stacked ordered phase.
文摘土壤参数是地表径流模型中的关键参数,对径流过程模拟有重要影响,因此有必要明确土壤参数的作用机制。论文结合SWAT(Soil and Water Assessment Tool)模型,以广泛应用的径流曲线数模型(SCS-CN)为例,对土壤参数在SCS-CN模型中的作用进行了理论推导、分析和实例研究。分析表明,土壤饱和含水量参数与田间持水量参数的比值,是影响不同土壤湿度下地表产流能力的重要因素,两者比值越大,土壤含水量对地表产流能力的调节越弱,导致基于不同土壤模拟的地表径流量随土壤湿度的波动而上下反转。以实际流域为例,发现不同土壤数据模拟地表径流间差别的显著季节性特征;阐明该差别季节性变化的内在机制,验证了理论分析结论。为深入理解产流过程、合理选择土壤数据、模型参数优化及模拟结果解释提供了参考。
