Hierarchical Sb_2S_3 hollow microspheres assembled by nanowires have been successfully synthesized by a simple and practical hydrothermal reaction. The possible formation process of this architecture was investigated ...Hierarchical Sb_2S_3 hollow microspheres assembled by nanowires have been successfully synthesized by a simple and practical hydrothermal reaction. The possible formation process of this architecture was investigated by X-ray diffraction, focused-ion beam-scanning electron microscopy dual-beam system, and transmission electron microscopy. When used as the anode material for lithium-ion batteries, Sb_2S_3 hollow microspheres manifest excellent rate property and enhanced lithium-storage capability and can deliver a discharge capacity of 674 m Ah g^(-1) at a current density of 200 m A g^(-1) after 50 cycles. Even at a high currentdensity of 5000 m A g^(-1), a discharge capacity of541 m Ah g^(-1) is achieved. Sb_2S_3 hollow microspheres also display a prominent sodium-storage capacity and maintain a reversible discharge capacity of 384 m Ah g^(-1) at a current density of 200 m A g^(-1) after 50 cycles. The remarkable lithium/sodium-storage property may be attributed to the synergetic effect of its nanometer size and three-dimensional hierarchical architecture, and the outstanding stability property is attributed to the sufficient interior void space,which can buffer the volume expansion.展开更多
In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC...In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC activity of TiO_(2)/Sb_(2)S_(3) composite sample was investigated by electrochemical impedance analysis,including Nyquist and Mott-Schottky(M-S)plots.It was demonstrated that vacuum annealing could crystallize Sb_(2)S_(3) component and change its color from red to black,leading to an increment of photocurrent density from 1.9 A/m^(2) to 4.25 A/m^(2) at 0 V versus saturated calomel electrode(VSCE).The enhanced PEC performance was mainly attributed to the improved visible light absorption.Moreover,annealing treatment facilitated retarding the electron-hole recombination occurred at the solid/liquid interfaces.Our work might provide a novel strategy for enhancing the PEC performance of a semiconductor electrode.展开更多
Antimony sulfide(Sb_(2)S_(3))is a promising material for photoelectrochemical(PEC)devices that generate green hydrogen from sunlight and water.In this study,we present a synthesis of high-performance Sb_(2)S_(3)photoa...Antimony sulfide(Sb_(2)S_(3))is a promising material for photoelectrochemical(PEC)devices that generate green hydrogen from sunlight and water.In this study,we present a synthesis of high-performance Sb_(2)S_(3)photoanodes via an interface-engineered hydrothermal growth followed by rapid thermal annealing(RTA).A TiO_(2)interfacial layer plays a crucial role in ensuring homogeneous precursor deposition,enhancing light absorption,and forming efficient heterojunctions with Sb_(2)S_(3),thereby significantly improving charge separation and transport.RTA further improves crystallinity and interfacial contact,resulting in dense and uniform Sb_(2)S_(3)films with enlarged grains and fewer defects.The optimized Sb_(2)S_(3)photoanode achieves a photocurrent density of 2.51 mA/cm^(2)at 1.23 V vs.the reversible hydrogen electrode(RHE),one of the highest reported for Sb_(2)S_(3)without additional catalysts or passivation layers.To overcome the limitations of oxygen evolution reaction(OER),we employ the iodide oxidation reaction(IOR)as an alternative,significantly lowering the overpotential and improving charge transfer kinetics.Consequently,it produces a record photocurrent density of 8.9 mA/cm^(2)at 0.54 V vs.RHE.This work highlights the synergy between TiO_(2)interfacial engineering,RTA-induced crystallization,and IOR-driven oxidation,offering a promising pathway for efficient and scalable PEC hydrogen production.展开更多
通过探索一系列静电纺丝-硫化-煅烧等工艺参数,制备了N-掺杂碳纤维复合Sb_(2)S_(3)柔性电极材料(Sb_(2)S_(3)/NC),并采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)等对样品的晶体结构、微观...通过探索一系列静电纺丝-硫化-煅烧等工艺参数,制备了N-掺杂碳纤维复合Sb_(2)S_(3)柔性电极材料(Sb_(2)S_(3)/NC),并采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)等对样品的晶体结构、微观形貌及化学组成等进行了表征.制备的Sb_(2)S_(3)/NC纳米纤维具有优异的机械柔性和独特的复合结构.30 nm大小的Sb_(2)S_(3)纳米粒子相互连接成串珠状形貌,均匀地分散在N-掺杂碳纳米纤维中,有利于提高电子/离子的传输速率和电极材料的循环稳定性.Sb_(2)S_(3)/NC作为负极材料直接组装成的钠离子电池显示出优异的电化学性能,电流密度0.1和2.0 A g^(-1)下,比容量分别达到476.5和266.2 mAh g^(-1),0.1 A g^(-1)下循环280次后比容量保持为466.3 mAh g^(-1).展开更多
钠离子电池(sodium-ion batteries,SIBs)具有成本低的潜在优势,有望成为替代锂离子电池(lithium ion batteries,LIBs)的储能设备。为提升钠离子电池的性能,开发出适应钠离子脱嵌的负极材料尤为重要。硫化锑(Sb_(2)S_(3))因其理论比容量...钠离子电池(sodium-ion batteries,SIBs)具有成本低的潜在优势,有望成为替代锂离子电池(lithium ion batteries,LIBs)的储能设备。为提升钠离子电池的性能,开发出适应钠离子脱嵌的负极材料尤为重要。硫化锑(Sb_(2)S_(3))因其理论比容量高被认为是较好的钠离子电池负极材料。本文使用简单水热法将Sb_(2)S_(3)与石墨烯复合,制备Sb_(2)S_(3)/石墨烯复合材料(Sb_(2)S_(3)/Gr)。结果表明:Sb_(2)S_(3)/Gr作为钠离子电池负极时,不仅表现出良好的电导率(3.5×10~(-3)S/cm)和钠离子扩散速率(4.853×10~(-13)cm~2/s),而且在0.5 A/g的电流密度下,首圈库伦效率为76.27%,经150次循环后的比容量稳定在488 m A·h/g,表现出较高的比容量。Sb_(2)S_(3)/Gr复合材料表现出了极大的应用潜力,为高性能钠离子电池负极材料的研发提供了一定的参考价值。展开更多
The application of Sb_(2)S_(3)with marvelous theoretical capacity for alkali metal-ion batteries is seriously limited by its poor electrical conductivity and low initial coulombic efficiency(ICE).In this work,natural ...The application of Sb_(2)S_(3)with marvelous theoretical capacity for alkali metal-ion batteries is seriously limited by its poor electrical conductivity and low initial coulombic efficiency(ICE).In this work,natural stibnite modified by carbon dots(Sb_(2)S_(3)@xCDs)is elaborately designed with high ICE.Greatly,chemical processes of local oxidation–partial reduction–deep coupling for stibnite reduction of CDs are clearly demonstrated,confirmed with in situ high-temperature X-ray diffraction.More impressively,the ICE for lithium-ion batteries(LIBs)is enhanced to 85%,through the effect of oxygen-rich carbon matrix on C–S bonds which inhibit the conversion of sulfur to sulfite,well supported by X-ray photoelectron spectroscopy characterization of solid electrolyte interphase layers helped with density functional theory calculations.Not than less,it is found that Sb–O–C bonds existed in the interface effectively promote the electronic conductivity and expedite ion transmission by reducing the bandgap and restraining the slip of the dislocation.As a result,the optimal sample delivers a tremendous reversible capacity of 660 mAh g^(−1)in LIBs at a high current rate of 5 A g^(−1).This work provides a new methodology for enhancing the electrochemical energy storage performance of metal sulfides,especially for improving the ICE.展开更多
To avoid the high purity reagents and high energy consumption involved in the manufacturing of lithium-ion battery anode materials,Sb_(2)S_(3) nanorods/porous-carbon anode was prepared by remodeling natural stibnite o...To avoid the high purity reagents and high energy consumption involved in the manufacturing of lithium-ion battery anode materials,Sb_(2)S_(3) nanorods/porous-carbon anode was prepared by remodeling natural stibnite ore with porous carbon matrix via a simple melting method.Due to the nanostructure of Sb_(2)S_(3) nanorods and synergistic effect of porous carbon,the Sb_(2)S_(3) nanorods/porous-carbon anode achieved high cyclic performance of 530.3 mA·h/g at a current density of 100 mA/g after 150 cycles,and exhibited a reversible capacity of 130.6 mA·h/g at a high current density of 5000 mA/g for 320 cycles.This shows a great possibility of utilizing Sb_(2)S_(3) ore as raw material to fabricate promising anodes for advanced lithium-ion batteries.展开更多
Antimony-based materials with high capacities and moderate potentials are promising anodes for lithium-/-sodium-ion batteries.However,their tremendous volume expansion and inferior conductivity lead to poor structural...Antimony-based materials with high capacities and moderate potentials are promising anodes for lithium-/-sodium-ion batteries.However,their tremendous volume expansion and inferior conductivity lead to poor structural stability and sluggish reaction kinetics.Herein,a doubleconfined nanoheterostructure Sb/Sb_(2)S_(3)@Ti_(3)C_(2)T_(x)@C has been fabricated through a solvothermal method followed by low-temperature heat treatment.The dual protection of“MXene”and“carbon”can better accommodate the volume expansion of Sb/Sb_(2)S_(3).The strong covalent bond(Ti-S,Ti-O-Sb,C-O-Sb)can firmly integrate Sb-based material with Ti_(3)C_(2)T_(x)and carbon,which significantly improves the structure stability.In addition,the carbon layer can restrain the oxidation of MXenes,and the nano-Sb/Sb_(2)S_(3)can facilitate electron/ion transport and suppress the restacking of MXenes.The heterogeneous interface between Sb and Sb_(2)S_(3)can further promote interfacial charge transfer.The MXene-Sb/Sb_(2)S_(3)@C-1 with the optimal Sb content shows high specific capacities,comparable rate properties and ultra-stable cycling performances(250 m Ah·g^(-1)after 2500 cycles at 1 A·g^(-1)for sodium-ion batteries).Ex situ X-ray diffractometer(XRD)test reveals the storage mechanism including the conversion and alloying process of MXene-Sb/Sb_(2)S_(3)@C-1.Cyclic voltammetry(CV)test results demonstrate that the pseudocapacitance behavior is dominant in MXene-Sb/Sb_(2)S_(3)@C-1,especially at large current.This design paves the way for exploring high-performance alloy-based/conversion-type anode for energy storage devices.展开更多
对NaCl-KCl、NaCl-CaCl_(2)、NaCl-Na_(2)CO_(3)、NaCl-KCl-CaCl_(2)和NaCl-KCl-Na_(2)CO_(3)熔盐体系开展比较分析,研究不同熔盐体系的相图、热稳定性和硫化锑的溶解度。根据锑元素分布特征、电流效率、能耗及熔渣成分表征结果,优选出...对NaCl-KCl、NaCl-CaCl_(2)、NaCl-Na_(2)CO_(3)、NaCl-KCl-CaCl_(2)和NaCl-KCl-Na_(2)CO_(3)熔盐体系开展比较分析,研究不同熔盐体系的相图、热稳定性和硫化锑的溶解度。根据锑元素分布特征、电流效率、能耗及熔渣成分表征结果,优选出适合Sb_(2)S_(3)电解还原的熔盐体系。结果表明,所有熔盐体系均具有良好热稳定性,且可实现Sb_(2)S_(3)的电解还原。添加CaCl_(2)的体系不利于Sb_(2)S_(3)溶解,而添加Na_(2)CO_(3)的体系会与Sb_(2)S_(3)发生反应。此外,NaCl-KCl体系的电流效率最高(75.68%),且能耗最低(2.18 k W·h/kg)。展开更多
A series of In_(x)Sb_(2-x)S_(3) nanosheets modified g-C_(3)N_(4)(In_(x)Sb_(2-x)S_(3)-TCN)heterojunctions with different g-C_(3)N_(4) contents were fabricated by an in situ deposition method.All the In_(x)Sb_(2-x)S_(3)...A series of In_(x)Sb_(2-x)S_(3) nanosheets modified g-C_(3)N_(4)(In_(x)Sb_(2-x)S_(3)-TCN)heterojunctions with different g-C_(3)N_(4) contents were fabricated by an in situ deposition method.All the In_(x)Sb_(2-x)S_(3)-TCN composites were applied as photocatalysts in Cr(Ⅵ)polluted water treatment and the results displayed that In_(x)Sb_(2-x)S_(3)-TCN could effectively remove Cr(Ⅵ)under visible light through synergistic effects of adsorption and photocatalytic reduction.Especially,In_(x)Sb_(2-x)S_(3)-TCN-70(70 mg g-C_(3)N_(4)) exhibited the most excellent adsorption and photocatalytic reduction performance among all composites,which possessed a high equilibrium adsorption capacity of 12.45 mg/g in a 30.0 mg/L Cr(Ⅵ)aqueous solution,and reduced Cr(Ⅵ)to Cr(Ⅲ)within 10 min under visible light irradiation.DRS and PL results indicated that the interfacial coupling effect between g-C_(3)N_(4)and In_(x)Sb_(2-x)S_(3) enhanced the utilization efficiency of visible light and suppressed photoinduced carrier recombination,which improved the photocatalytic activity of composites.Moreover,the photocatalyst exhibited satisfactory reduction activity and good stability after 5 cycles of Cr(Ⅵ)adsorptionphotoreduction.展开更多
Sb_(2)S_(3)is a promising candidate for the flexible solar cells or the top subcells in tandem solar cells due to its wide-bandgap,less toxic,acceptable cost and progressive power conversion efficiency(PCE).However,th...Sb_(2)S_(3)is a promising candidate for the flexible solar cells or the top subcells in tandem solar cells due to its wide-bandgap,less toxic,acceptable cost and progressive power conversion efficiency(PCE).However,the poor quality and high trap states of Sb_(2)S_(3)films limit the device performance further enhancement.Herein,we adopt a multidentate ionic liquid,tetramethylammonium hexafluorophosphate([TMA][PF_(6)])as a novel additive to address this issue.The octahedral[PF_(6)]~-contains six different oriented fluorine atoms with the lone pair electrons,which could coordinate with Sb atoms due to the multidentate anchoring.Thus,the high-quality Sb_(2)S_(3)film with low trap states has been achieved.Moreover,the Fermi level of the Sb_(2)S_(3)film has been upshifted,thereby showing an effective charge transfer.As a result,all photovoltaic parameters of the optimized Sb_(2)S_(3)devices are obviously enhanced,boosting the final PCE from 4.43(control device)to 6.83%.Our study about the multidentate anchoring is manifested to be an effective method to enhance the Sb_(2)S_(3)device performance.展开更多
Antimony sulfide(Sb_(2)S_(3))is an appealing semiconductor as light absorber for solar cells due to its high absorption coefficient,appropriate band gap(~1.7 e V)and abundance of constituent elements.However,power con...Antimony sulfide(Sb_(2)S_(3))is an appealing semiconductor as light absorber for solar cells due to its high absorption coefficient,appropriate band gap(~1.7 e V)and abundance of constituent elements.However,power conversion efficiency(PCE)of Sb_(2)S_(3)-based solar cells still lags much behind the theoretically predicted due to the imperfect energy level alignment at the charge transporting layer/Sb_(2)S_(3)interfaces and hence severe charge recombination.Herein,we insert a high-temperature sintered magnesium(Mg)-doped tin oxide(SnO_(2))layer between cadmium sulfide(Cd S)and fuorine doped tin oxide to form a cascaded energy level alignment and thus mitigate interfacial charge recombination.Simultaneously,the inserted Mg-doped Sn O_(2)buffer layer facilitates the growth of the neibouring Cd S film with orientation followed by Sb_(2)S_(3)film with larger grains and fewer pinholes.Consequently,the resultant Sb_(2)S_(3)solar cells with Mg-doped SnO_(2)deliver a champion PCE of 6.31%,22.8%higher than those without a buffer layer.Our work demonstrates that deliberate absorber growth as well as efficient hole blocking upon an appropriate buffer layer is viable in obtaining solution-processed Sb_(2)S_(3)solar cells with high performance.展开更多
基金supported financially by the National Natural Foundation of China(Grant No.51672234)the Research Foundation for Hunan Youth Outstanding People from Hunan Provincial Science and Technology Department(2015RS4030)+1 种基金Hunan 2011 Collaborative Innovation Center of Chemical Engineering&Technology with Environmental Benignity and Effective Resource UtilizationProgram for Innovative Research Cultivation Team in University of Ministry of Education of China(1337304)
文摘Hierarchical Sb_2S_3 hollow microspheres assembled by nanowires have been successfully synthesized by a simple and practical hydrothermal reaction. The possible formation process of this architecture was investigated by X-ray diffraction, focused-ion beam-scanning electron microscopy dual-beam system, and transmission electron microscopy. When used as the anode material for lithium-ion batteries, Sb_2S_3 hollow microspheres manifest excellent rate property and enhanced lithium-storage capability and can deliver a discharge capacity of 674 m Ah g^(-1) at a current density of 200 m A g^(-1) after 50 cycles. Even at a high currentdensity of 5000 m A g^(-1), a discharge capacity of541 m Ah g^(-1) is achieved. Sb_2S_3 hollow microspheres also display a prominent sodium-storage capacity and maintain a reversible discharge capacity of 384 m Ah g^(-1) at a current density of 200 m A g^(-1) after 50 cycles. The remarkable lithium/sodium-storage property may be attributed to the synergetic effect of its nanometer size and three-dimensional hierarchical architecture, and the outstanding stability property is attributed to the sufficient interior void space,which can buffer the volume expansion.
基金supported by the Fundamental Research Funds for the Central Universities(No.2019ZDPY04).
文摘In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC activity of TiO_(2)/Sb_(2)S_(3) composite sample was investigated by electrochemical impedance analysis,including Nyquist and Mott-Schottky(M-S)plots.It was demonstrated that vacuum annealing could crystallize Sb_(2)S_(3) component and change its color from red to black,leading to an increment of photocurrent density from 1.9 A/m^(2) to 4.25 A/m^(2) at 0 V versus saturated calomel electrode(VSCE).The enhanced PEC performance was mainly attributed to the improved visible light absorption.Moreover,annealing treatment facilitated retarding the electron-hole recombination occurred at the solid/liquid interfaces.Our work might provide a novel strategy for enhancing the PEC performance of a semiconductor electrode.
基金supported by the National Research Foundation of Korea(NRF)grant fu nded by the Korean government(MSIT)(No.RS-2024-00335976)。
文摘Antimony sulfide(Sb_(2)S_(3))is a promising material for photoelectrochemical(PEC)devices that generate green hydrogen from sunlight and water.In this study,we present a synthesis of high-performance Sb_(2)S_(3)photoanodes via an interface-engineered hydrothermal growth followed by rapid thermal annealing(RTA).A TiO_(2)interfacial layer plays a crucial role in ensuring homogeneous precursor deposition,enhancing light absorption,and forming efficient heterojunctions with Sb_(2)S_(3),thereby significantly improving charge separation and transport.RTA further improves crystallinity and interfacial contact,resulting in dense and uniform Sb_(2)S_(3)films with enlarged grains and fewer defects.The optimized Sb_(2)S_(3)photoanode achieves a photocurrent density of 2.51 mA/cm^(2)at 1.23 V vs.the reversible hydrogen electrode(RHE),one of the highest reported for Sb_(2)S_(3)without additional catalysts or passivation layers.To overcome the limitations of oxygen evolution reaction(OER),we employ the iodide oxidation reaction(IOR)as an alternative,significantly lowering the overpotential and improving charge transfer kinetics.Consequently,it produces a record photocurrent density of 8.9 mA/cm^(2)at 0.54 V vs.RHE.This work highlights the synergy between TiO_(2)interfacial engineering,RTA-induced crystallization,and IOR-driven oxidation,offering a promising pathway for efficient and scalable PEC hydrogen production.
文摘通过探索一系列静电纺丝-硫化-煅烧等工艺参数,制备了N-掺杂碳纤维复合Sb_(2)S_(3)柔性电极材料(Sb_(2)S_(3)/NC),并采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)等对样品的晶体结构、微观形貌及化学组成等进行了表征.制备的Sb_(2)S_(3)/NC纳米纤维具有优异的机械柔性和独特的复合结构.30 nm大小的Sb_(2)S_(3)纳米粒子相互连接成串珠状形貌,均匀地分散在N-掺杂碳纳米纤维中,有利于提高电子/离子的传输速率和电极材料的循环稳定性.Sb_(2)S_(3)/NC作为负极材料直接组装成的钠离子电池显示出优异的电化学性能,电流密度0.1和2.0 A g^(-1)下,比容量分别达到476.5和266.2 mAh g^(-1),0.1 A g^(-1)下循环280次后比容量保持为466.3 mAh g^(-1).
文摘钠离子电池(sodium-ion batteries,SIBs)具有成本低的潜在优势,有望成为替代锂离子电池(lithium ion batteries,LIBs)的储能设备。为提升钠离子电池的性能,开发出适应钠离子脱嵌的负极材料尤为重要。硫化锑(Sb_(2)S_(3))因其理论比容量高被认为是较好的钠离子电池负极材料。本文使用简单水热法将Sb_(2)S_(3)与石墨烯复合,制备Sb_(2)S_(3)/石墨烯复合材料(Sb_(2)S_(3)/Gr)。结果表明:Sb_(2)S_(3)/Gr作为钠离子电池负极时,不仅表现出良好的电导率(3.5×10~(-3)S/cm)和钠离子扩散速率(4.853×10~(-13)cm~2/s),而且在0.5 A/g的电流密度下,首圈库伦效率为76.27%,经150次循环后的比容量稳定在488 m A·h/g,表现出较高的比容量。Sb_(2)S_(3)/Gr复合材料表现出了极大的应用潜力,为高性能钠离子电池负极材料的研发提供了一定的参考价值。
基金financially supported by the National Natural Science Foundation of China (51904342, 52074359, U21A20284)Hunan Provincial Science and Technology Plan (2020JJ3048)the Science and Technology Innovation Program of Hunan Province (2021RC3014, 2020RC4005, 2019RS1004)
文摘The application of Sb_(2)S_(3)with marvelous theoretical capacity for alkali metal-ion batteries is seriously limited by its poor electrical conductivity and low initial coulombic efficiency(ICE).In this work,natural stibnite modified by carbon dots(Sb_(2)S_(3)@xCDs)is elaborately designed with high ICE.Greatly,chemical processes of local oxidation–partial reduction–deep coupling for stibnite reduction of CDs are clearly demonstrated,confirmed with in situ high-temperature X-ray diffraction.More impressively,the ICE for lithium-ion batteries(LIBs)is enhanced to 85%,through the effect of oxygen-rich carbon matrix on C–S bonds which inhibit the conversion of sulfur to sulfite,well supported by X-ray photoelectron spectroscopy characterization of solid electrolyte interphase layers helped with density functional theory calculations.Not than less,it is found that Sb–O–C bonds existed in the interface effectively promote the electronic conductivity and expedite ion transmission by reducing the bandgap and restraining the slip of the dislocation.As a result,the optimal sample delivers a tremendous reversible capacity of 660 mAh g^(−1)in LIBs at a high current rate of 5 A g^(−1).This work provides a new methodology for enhancing the electrochemical energy storage performance of metal sulfides,especially for improving the ICE.
基金the financial supports from the National Natural Science Foundation of China(No.51774343).
文摘To avoid the high purity reagents and high energy consumption involved in the manufacturing of lithium-ion battery anode materials,Sb_(2)S_(3) nanorods/porous-carbon anode was prepared by remodeling natural stibnite ore with porous carbon matrix via a simple melting method.Due to the nanostructure of Sb_(2)S_(3) nanorods and synergistic effect of porous carbon,the Sb_(2)S_(3) nanorods/porous-carbon anode achieved high cyclic performance of 530.3 mA·h/g at a current density of 100 mA/g after 150 cycles,and exhibited a reversible capacity of 130.6 mA·h/g at a high current density of 5000 mA/g for 320 cycles.This shows a great possibility of utilizing Sb_(2)S_(3) ore as raw material to fabricate promising anodes for advanced lithium-ion batteries.
基金supported by the National Natural Science Foundation of China(Nos.52071073,52177208,52171202 and 51971055)Hebei Province"333 talent project"(No.C20221012)+2 种基金the Natural Science Foundation of Hebei Province(No.E2020501004)the Fundamental Research Funds for the Central Universities(No.N2123032)the Science and Technology Project of Hebei Education Department(No.BJK2023005)。
文摘Antimony-based materials with high capacities and moderate potentials are promising anodes for lithium-/-sodium-ion batteries.However,their tremendous volume expansion and inferior conductivity lead to poor structural stability and sluggish reaction kinetics.Herein,a doubleconfined nanoheterostructure Sb/Sb_(2)S_(3)@Ti_(3)C_(2)T_(x)@C has been fabricated through a solvothermal method followed by low-temperature heat treatment.The dual protection of“MXene”and“carbon”can better accommodate the volume expansion of Sb/Sb_(2)S_(3).The strong covalent bond(Ti-S,Ti-O-Sb,C-O-Sb)can firmly integrate Sb-based material with Ti_(3)C_(2)T_(x)and carbon,which significantly improves the structure stability.In addition,the carbon layer can restrain the oxidation of MXenes,and the nano-Sb/Sb_(2)S_(3)can facilitate electron/ion transport and suppress the restacking of MXenes.The heterogeneous interface between Sb and Sb_(2)S_(3)can further promote interfacial charge transfer.The MXene-Sb/Sb_(2)S_(3)@C-1 with the optimal Sb content shows high specific capacities,comparable rate properties and ultra-stable cycling performances(250 m Ah·g^(-1)after 2500 cycles at 1 A·g^(-1)for sodium-ion batteries).Ex situ X-ray diffractometer(XRD)test reveals the storage mechanism including the conversion and alloying process of MXene-Sb/Sb_(2)S_(3)@C-1.Cyclic voltammetry(CV)test results demonstrate that the pseudocapacitance behavior is dominant in MXene-Sb/Sb_(2)S_(3)@C-1,especially at large current.This design paves the way for exploring high-performance alloy-based/conversion-type anode for energy storage devices.
基金the financial supports from the National Natural Science Foundation of China(No.52074362)。
文摘对NaCl-KCl、NaCl-CaCl_(2)、NaCl-Na_(2)CO_(3)、NaCl-KCl-CaCl_(2)和NaCl-KCl-Na_(2)CO_(3)熔盐体系开展比较分析,研究不同熔盐体系的相图、热稳定性和硫化锑的溶解度。根据锑元素分布特征、电流效率、能耗及熔渣成分表征结果,优选出适合Sb_(2)S_(3)电解还原的熔盐体系。结果表明,所有熔盐体系均具有良好热稳定性,且可实现Sb_(2)S_(3)的电解还原。添加CaCl_(2)的体系不利于Sb_(2)S_(3)溶解,而添加Na_(2)CO_(3)的体系会与Sb_(2)S_(3)发生反应。此外,NaCl-KCl体系的电流效率最高(75.68%),且能耗最低(2.18 k W·h/kg)。
基金Projects(41977129,21607176,42007138) supported by the National Natural Science Foundation of ChinaProject(kq1802011) supported by the Changsha Outstanding Innovative Youth Training Program,ChinaProject(2017JJ3516)supported by the Natural Science Foundation of Hunan Province,China。
文摘A series of In_(x)Sb_(2-x)S_(3) nanosheets modified g-C_(3)N_(4)(In_(x)Sb_(2-x)S_(3)-TCN)heterojunctions with different g-C_(3)N_(4) contents were fabricated by an in situ deposition method.All the In_(x)Sb_(2-x)S_(3)-TCN composites were applied as photocatalysts in Cr(Ⅵ)polluted water treatment and the results displayed that In_(x)Sb_(2-x)S_(3)-TCN could effectively remove Cr(Ⅵ)under visible light through synergistic effects of adsorption and photocatalytic reduction.Especially,In_(x)Sb_(2-x)S_(3)-TCN-70(70 mg g-C_(3)N_(4)) exhibited the most excellent adsorption and photocatalytic reduction performance among all composites,which possessed a high equilibrium adsorption capacity of 12.45 mg/g in a 30.0 mg/L Cr(Ⅵ)aqueous solution,and reduced Cr(Ⅵ)to Cr(Ⅲ)within 10 min under visible light irradiation.DRS and PL results indicated that the interfacial coupling effect between g-C_(3)N_(4)and In_(x)Sb_(2-x)S_(3) enhanced the utilization efficiency of visible light and suppressed photoinduced carrier recombination,which improved the photocatalytic activity of composites.Moreover,the photocatalyst exhibited satisfactory reduction activity and good stability after 5 cycles of Cr(Ⅵ)adsorptionphotoreduction.
基金financially supported by the Basic Research Fund for Free Exploration in Shenzhen(No.JCYJ20180306171402878)the National Natural Science Foundation of China(No.52072228,51571166 and 21603175)the Fundamental Research Funds for the Central Universities(No.3102019JC005)。
文摘Sb_(2)S_(3)is a promising candidate for the flexible solar cells or the top subcells in tandem solar cells due to its wide-bandgap,less toxic,acceptable cost and progressive power conversion efficiency(PCE).However,the poor quality and high trap states of Sb_(2)S_(3)films limit the device performance further enhancement.Herein,we adopt a multidentate ionic liquid,tetramethylammonium hexafluorophosphate([TMA][PF_(6)])as a novel additive to address this issue.The octahedral[PF_(6)]~-contains six different oriented fluorine atoms with the lone pair electrons,which could coordinate with Sb atoms due to the multidentate anchoring.Thus,the high-quality Sb_(2)S_(3)film with low trap states has been achieved.Moreover,the Fermi level of the Sb_(2)S_(3)film has been upshifted,thereby showing an effective charge transfer.As a result,all photovoltaic parameters of the optimized Sb_(2)S_(3)devices are obviously enhanced,boosting the final PCE from 4.43(control device)to 6.83%.Our study about the multidentate anchoring is manifested to be an effective method to enhance the Sb_(2)S_(3)device performance.
基金supported by the National Natural Science Foundation of China(Grant Nos.62074117,61904126)the Natural Science Foundation of Hubei Province,China(Grant Nos.2019AAA020,2019CFB122)+2 种基金the Natural Science Foundation of Guangdong Province(2021A1515012594)Guangdong Province Office of Education(2020ZDZX2028)the Special Funds for the Development of Strategic Emerging Industries in Shenzhen(JCYJ20190808152609307)。
文摘Antimony sulfide(Sb_(2)S_(3))is an appealing semiconductor as light absorber for solar cells due to its high absorption coefficient,appropriate band gap(~1.7 e V)and abundance of constituent elements.However,power conversion efficiency(PCE)of Sb_(2)S_(3)-based solar cells still lags much behind the theoretically predicted due to the imperfect energy level alignment at the charge transporting layer/Sb_(2)S_(3)interfaces and hence severe charge recombination.Herein,we insert a high-temperature sintered magnesium(Mg)-doped tin oxide(SnO_(2))layer between cadmium sulfide(Cd S)and fuorine doped tin oxide to form a cascaded energy level alignment and thus mitigate interfacial charge recombination.Simultaneously,the inserted Mg-doped Sn O_(2)buffer layer facilitates the growth of the neibouring Cd S film with orientation followed by Sb_(2)S_(3)film with larger grains and fewer pinholes.Consequently,the resultant Sb_(2)S_(3)solar cells with Mg-doped SnO_(2)deliver a champion PCE of 6.31%,22.8%higher than those without a buffer layer.Our work demonstrates that deliberate absorber growth as well as efficient hole blocking upon an appropriate buffer layer is viable in obtaining solution-processed Sb_(2)S_(3)solar cells with high performance.
