We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platfo...We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platform.Through the self-imaging effect of multimode interference(MMI)coupler,the demultiplexing function for 1310 nm and 1550 nm wavelengths is implemented.After that,three parallel SWG-based slots are inserted into the MMI section so that the effective refractive index of the modes can be engineered and thus the beat length can be adjusted.Importantly,these three SWG slots significantly reduce the length of the device,which is much shorter than the length of traditional MMI-based wavelength demultiplexers.Ultimately,by using the PSO algorithm,the equivalent refractive index and width of the SWG in a certain range are optimized to achieve the best performance of the wavelength demultiplexer.It has been verified that the device footprint is only 2×30.68μm^(2),and 1 dB bandwidths of larger than 120 nm are acquired at 1310 nm and 1550 nm wavelengths.Meanwhile,the transmitted spectrum shows that the insertion loss(IL)values are below 0.47 dB at both wavelengths when the extinction ratio(ER)values are above 12.65 dB.This inverse design approach has been proved to be efficient in increasing bandwidth and reducing device length.展开更多
The field of subwavelength optics has opened new avenues for investigating light–matter interactions by enabling the exploration of novel phenomena at the subwavelength scale. In recent decades,advancements in fundam...The field of subwavelength optics has opened new avenues for investigating light–matter interactions by enabling the exploration of novel phenomena at the subwavelength scale. In recent decades,advancements in fundamental understanding and micro–nanotechnologies have significantly propelled the development of subwavelength optics and its practical applications.展开更多
This work proposes a novel design for a narrowband filter operating in the mid-wave infrared(MWIR)spectrum.The filter is designed with a single layer of slab waveguide decorated with a layer of gold grating arrays.Thi...This work proposes a novel design for a narrowband filter operating in the mid-wave infrared(MWIR)spectrum.The filter is designed with a single layer of slab waveguide decorated with a layer of gold grating arrays.This design demonstrates superior narrowband transmission properties within the MWIR range,which can be explained in the framework of guided-mode resonance(GMR).Since MWIR spectral data is crucial for identifying the chemical fingerprint of man-made objects and natural materials,the GMR filters hold great potential in integration with commercial MWIR photodetectors and focal plane arrays(FPAs)and addressing the market’s demand for ultra-compact spectral detection solutions.Theoretical studies have investigated the influential parameters in the GMR filter design and provided the methods towards optimal filtering performance.The center wavelength of these transmission filters exhibits significant tunability,spanning from 3μm to 5μm across the MWIR spectrum,while the full width at half maximum(FWHM)exhibits remarkable variability,ranging from 5.7 nm to 101.0 nm,enabling the attainment of desired filter performance contingent upon judicious waveguide material selection and optimized structural design.This work forges a path toward integrating multifunctional capabilities into ultra-compact MWIR sensors.展开更多
Metal micro-nano grating has received much attention due to its ability to provide high-efficiency light absorption.However,the current research scales of these metal gratings are focused on subwavelengths,and little ...Metal micro-nano grating has received much attention due to its ability to provide high-efficiency light absorption.However,the current research scales of these metal gratings are focused on subwavelengths,and little attention has been paid to the absorption properties of metal gratings at other scales.We investigate the absorption properties of metal gratings based on surface plasmon resonance(SPR)across the scales from superwavelength to subwavelength.Under grazing incidence,we observe continuous strong absorption phenomena from superwavelength to subwavelength Al triangle-groove gratings(TGGs).Perfect absorption is realized at the subwavelength scale,whereas the maximum absorption at all other scales exceeds 74%.The electric field distribution gives the mechanism of the strong absorption phenomenon attributed to SPR on the surface of Al TGGs at different scales.In particular,subwavelength Al TGGs have perfectly symmetric absorption properties for different blaze angles,and the symmetry is gradually broken as the grating period’s scale increases.Furthermore,taking Al gratings with varying groove shapes for example,we extend the equivalence rule of grating grooves to subwavelength from near-wavelength and explain the symmetric absorption properties in Al TGGs.We unify the research of metal grating absorbers outside the subwavelength scale to a certain extent,and these findings also open new perspectives for the design of metal gratings in the future.展开更多
Plasmonic colors are attracting attention for their subwavelength small size,vibrant hues,and environmental sustainability beyond traditional pigments while suffering from angular and/or polarization dependency due to...Plasmonic colors are attracting attention for their subwavelength small size,vibrant hues,and environmental sustainability beyond traditional pigments while suffering from angular and/or polarization dependency due to distinct excitations of lattice resonances and/or surface plasmon polaritons(SPPs).Here,we demonstrate the sodium metasurface-based plasmonic color palettes with polarization-independent wide-view angle(approximately>〓〓60 deg in experiment and up to〓〓90 deg in theory)and single-particlelevel pixel size(down to∼60 nm)that integrate both pigment-like and structure coloring advantages,fabricated by the templated nanorod-pixelated solidification of wetted liquid metals.Such intriguing performances are mainly attributed to the particle plasmon dominant spectral response by steering the filling profile and thus the interplay between localized surface plasmons and SPPs.Combining low material cost,potentially scalable manufacturing process,and pronounced optical performance,the proposed sodium-based metasurfaces will provide a promising route for advanced color information technology.展开更多
A pin-like beam is a kind of structured light with a special intensity distribution that can be against diffraction,which can be seen as a kind of quasi-nondiffracting beam(Q-NDB).Due to its wide applications,recently...A pin-like beam is a kind of structured light with a special intensity distribution that can be against diffraction,which can be seen as a kind of quasi-nondiffracting beam(Q-NDB).Due to its wide applications,recently,numerous researchers have used optical lenses or on-chip integrated optical diffractive elements to generate this kind of beam.We theoretically verify and experimentally demonstrate an all-fiber solution to generate a subwavelength inverted pin beam by integrating a simple plasma structure on the fiber end surface.The output beams generated by two kinds of plasma structures,i.e.,nanoring slot and nanopetal structure,are investigated and measured experimentally.The results show that both the structures are capable of generating subwavelength beams,and the beam generated using the nanopetal structure has the sidelobe suppression ability along the x-axis direction.Our all-fiber device can be flexibly inserted into liquid environments such as cell cultures,blood,and biological tissue fluids to illuminate or stimulate biological cells and molecules in them.It provides a promising fiber-integrated solution for exploring light–matter interaction with subwavelength resolution in the field of biological research.展开更多
In this paper, we present the electromagnetic analysis of a rectangular cavity partially filled with a left-handed material slab. Our theoretical investigation shows that there exist novel resonant modes in the cavity...In this paper, we present the electromagnetic analysis of a rectangular cavity partially filled with a left-handed material slab. Our theoretical investigation shows that there exist novel resonant modes in the cavity, and such a cavity becomes a subwavelength cavity. The eigenvalue equation of the cavity is derived and the resonant frequencies of the novel modes are calculated by using numerical simulation. We also discuss the stability of the novel resonant modes and show the best condition under which a useful rectangular cavity of subwavelength dimensions with tolerable stability is obtained.展开更多
In this paper, a novel method of a subwavelength binary simple periodic rectangular structure is presented to realize even beam splitting by combining the rigorous couple-wave analysis with the genetic algorithm. Seve...In this paper, a novel method of a subwavelength binary simple periodic rectangular structure is presented to realize even beam splitting by combining the rigorous couple-wave analysis with the genetic algorithm. Several even splitters in the terahertz region were designed and one of the silicon-based beam splitters designed to separate one incident beam into four emergent beams has total efficiency up to 92.23 %. Zero-order diffraction efficiency was reduced to less than 0.192 % and the error of uniformity decreased to 6.51 9 10-6. These results break the limitation of even beam splitting based on the traditional scalar theory. In addition, the effects of the incident angle, wavelength, as well as the polarizing angle on the diffraction efficiency and uniformity were also investigated.展开更多
The extraordinary light transmission through a 200-nm thick gold film when passing through different subwavelength hole arrays is observed experimentally. The sample is fabricated by electron beam lithography and reac...The extraordinary light transmission through a 200-nm thick gold film when passing through different subwavelength hole arrays is observed experimentally. The sample is fabricated by electron beam lithography and reactive ion etching system. A comparison between light transmissions shows that the hole shape changing from rectangular to diamond strongly affects the transmission intensity although both structures possess the same lattice constant of 600 nm. Moreover, the position of the transmission maximum undergoes a spectral red-shift of about 63 nm. Numerical simulations by using a transfer matrix method reproduce the observed transmission spectrum quite well.展开更多
This paper presents a review of recent investigational studies on exciting Surface Plasmon Polaritous (SPPs)in MicroWave (MW)and TeraHertZ (THz)regimes by using subwavelength corrugated patterns on conductive or metal...This paper presents a review of recent investigational studies on exciting Surface Plasmon Polaritous (SPPs)in MicroWave (MW)and TeraHertZ (THz)regimes by using subwavelength corrugated patterns on conductive or metal surfaces.This article also describes SPP Microstrip (MS)structures at microwave and terahertz frequencies, and compares their significance with that of conventional MS Transmission Lines (TL),in order to tackle the key challenges of high gain,bandwidth size,compactness,TL losses,and signal integrity in high-end electronic de- vices.Because they have subwavelength properties,surface plasmon polaritous are gaining attention for their improved performance and ability for miniaturization in high-speed dense circuits.They possess comparably minuscule wavelength compared to incident light (photons).Consequently,they can demonstrate stronger spatial confinement and higher local field intensity at optical frequencies.In addition to engineering spoof SPP waveguides,which are created by engraving grooves and slits on metal surfaces to allow operation on at low frequencies (microwave and terahertz),semiconductors with smaller permittivity values and thus lower free charge carrier concentration have been demonstrated as a potential candidate in plasmonic devices.If necessary,further tuning of semiconductor-based SPP structures is aided by controlling the charge carrier concentration through doping,or by external stimuli such as optical illumination or thermal excitation of charge carriers from valence to conduction bands.This article conclusively covers previously elucidated perspectives on manipulating SSPPs in the MW and THz ranges,and emphasizes how these could steer next-generation plasmonic devices.展开更多
In this paper, the authors present the transmission line (TL) realization of one-dimensional subwavelength resonator formed by a pair of conventional right-handed material (RHM) and left-handed material (LHM). In such...In this paper, the authors present the transmission line (TL) realization of one-dimensional subwavelength resonator formed by a pair of conventional right-handed material (RHM) and left-handed material (LHM). In such resonator, a novel reso- nant mode with the resonant frequency depending on the length ratio of the RH/LH TL sections occurs as a consequence of the full phase compensation due to the backward wave in the LH TL section. The theoretical circuit-model analyses are supported by simulation and experimental evidence on resonators with different RH/LH length ratios.展开更多
In this paper, split-ring-based metamaterial sheets are designed for the purpose of achieving far-field subwavelength focusing, with the aid of a time-reversal technique. The metamaterial sheets are inserted into a su...In this paper, split-ring-based metamaterial sheets are designed for the purpose of achieving far-field subwavelength focusing, with the aid of a time-reversal technique. The metamaterial sheets are inserted into a subwavelength array consist- ing of four element antennas, with the element spacing being as small as 1/15 of a wavelength. Experiments are performed to investigate the effect of the metamaterial sheets on the focusing resolution. The results demonstrate that in the presence of the metamaterial sheets, the subwavelength array exhibits the ability to achieve super-resolution focusing, while there is no super-resolution focusing without the metamaterial sheets. Further investigation shows that the metamaterial sheets are contributive to achieving super-resolution by weakening the cross-correlations of the channel impulse responses between the array elements.展开更多
The transmission characteristics of a metallic film with subwavelength periodic slits are investigated by using the two-dimensional finite-difference time-domain method （2D-FDTD）. Two models are constructed to show ...The transmission characteristics of a metallic film with subwavelength periodic slits are investigated by using the two-dimensional finite-difference time-domain method （2D-FDTD）. Two models are constructed to show the dependance of the transmission spectrum on the slit structure. A sandwiched structure is used to exhibit the contribution of the metallic wall inside slits to the extraordinary high transmission. And a filled slit structure is employed to reflect the relation between the average refractive index inside the slits and the transmission spectrum of the structure. The transmission characteristics of two structures can be explained well with the waveguide resonance theory.展开更多
In this paper we study the extraordinary optical transmission of one-dimensional multi-slits in an ideal metal film.The transmissivity is calculated as a function of various structural parameters.The transmissivity os...In this paper we study the extraordinary optical transmission of one-dimensional multi-slits in an ideal metal film.The transmissivity is calculated as a function of various structural parameters.The transmissivity oscillates,with the period being just the light wavelength,as a function of the spacing between slits.As the number of slits increases,the transmissivity varies in one of three ways.It can increase,attenuate,or remain basically unchanged,depending on the spacing between slits.Each way is in an oscillatory manner.The slit interaction responsible for the oscillating transmission strength that depends on slit spacing is the subject of more detailed investigation.The interaction most intuitively manifests as a current distribution in the metal surface between slits.We find that this current is attenuated in an oscillating fashion from the slit corners to the center of the region between two adjacent slits,and we present a mathematical expression for its waveform.展开更多
A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated res...A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.展开更多
Compact passive silicon photonic devices with high performance are always desired for future largescale photonic integration.Inverse design provides a promising approach to realize new-generation photonic devices,whil...Compact passive silicon photonic devices with high performance are always desired for future largescale photonic integration.Inverse design provides a promising approach to realize new-generation photonic devices,while it is still very challenging to realize complex photonic devices for most inverse designs reported previously due to the limits of computational resources.Here,we present the realization of several representative advanced passive silicon photonic devices with complex optimization,including a sixchannel mode(de)multiplexer,a broadband 90 deg hybrid,and a flat-top wavelength demultiplexer.These devices are designed inversely by optimizing a subwavelength grating(SWG)region and the multimode excitation and the multimode interference are manipulated.Particularly,such SWG structures are more fabrication-friendly than those random nanostructures introduced in previous inverse designs.The realized photonic devices have decent performances in a broad bandwidth with a low excess loss of<1 dB,which is much lower than that of previous inverse-designed devices.The present inverse design strategy shows great effectiveness for designing advanced photonic devices with complex requirements(which is beyond the capability of previous inverse designs)by using affordable computational resources.展开更多
In this paper, we demonstrate a spin-controlled directional launching of surface plasmons at the subwavelength scale.Based on the principle of optical spin＇s effect for the geometric phase of light, the nanostructure...In this paper, we demonstrate a spin-controlled directional launching of surface plasmons at the subwavelength scale.Based on the principle of optical spin＇s effect for the geometric phase of light, the nanostructures were designed. The inclination of the structures decides the spin-related geometric phase and their relative positions decide the distance-related phase. Hence, the propagation direction of the generated surface plasmon polaritons（SPPs） can be controlled by the spin of photons. Numerical simulations by the finite difference time domain（FDTD） method have verified our theoretical prediction. Our structure is fabricated on the Au film by using a focused ion beam etching technique. The total size of the surface plasmon polariton（SPP） launcher is 320 nm by 180 nm. The observation of the SPP launching by using scanning near-field optical microscopy is in agreement with our theory and simulations. This result may provide a new way of spin-controlled directional launching of SPP.展开更多
A tunable plasmofluidic lens consisting of nanoslit arrays on a metal film is proposed for subwavelength imaging in far field at different wavelengths.The nanoslit arrays with constant depths but varying widths could ...A tunable plasmofluidic lens consisting of nanoslit arrays on a metal film is proposed for subwavelength imaging in far field at different wavelengths.The nanoslit arrays with constant depths but varying widths could generate desired optical phase retardations based on the propagation property of the surface plasmon polaritons(SPPs)through the metal-dielectric-metal(MDM)nanoslit waveguide.We demonstrate the tunability of the plasmofluidic lens for subwavelength imaging by changing the surrounding dielectric fluid.This work provides a novel approach for developing integrative tunable plasmofluidic lens for a variety of lab-on-chip applications.展开更多
Analytical nonparaxial vectorial electric field expressions for both Gaussian beams and plane waves diffracted through a circular aperture are derived by using the vector plane angular spectrum method for the first ti...Analytical nonparaxial vectorial electric field expressions for both Gaussian beams and plane waves diffracted through a circular aperture are derived by using the vector plane angular spectrum method for the first time, which is suitable for the subwavelength aperture and the near-field region. The transverse properties of intensity distributions and their evolutions with the propagating distance, and the power transmission functions for diffracted fields containing the whole field, the evanescent field and the propagating field are investigated in detail, which is helpful for understanding the relationship between evanescent and propagating components in the near-field region and can be applied to apertured near-field scanning optical microscopy.展开更多
A novel plasmonic structure consisting of three nano-scaled slits coupled by nano-disk-shaped nanocavities is pro- posed to produce subwavelength focusing and beam bending at optical frequencies. The incident light pa...A novel plasmonic structure consisting of three nano-scaled slits coupled by nano-disk-shaped nanocavities is pro- posed to produce subwavelength focusing and beam bending at optical frequencies. The incident light passes through the metal slits in the form of surface plasmon polaritons （SPPs） ,and then scatters into radiation fields. Numerical simulations using finite-difference time-domain （FDTD） method show that the transmitted fields through the design example can gener- ate light focusing and deflection by altering the refractive index of the coupled nanocavity. The simulation results indicate that the focal spot is beyond the diffraction limit. Light impinges on the surface at an angle to the optical axis will add an extra planar phase front that interferes with the asymmetric phase front of the plasmonic lens, leading to a larger bending angle off the axial direction. The advantages of the proposed plasmonic lens are smaller device size and ease of fabrication. Such geometries offer the potential to be controlled by using nano-positior!i0g systems for applications in dynamic beam shaping and scanning on the nanoscale.展开更多
基金supported by the National Natural Science Foundation of China(No.61505160)the Innovation Capability Support Program of Shaanxi(No.2018KJXX-042)+2 种基金the Natural Science Basic Research Program of Shaanxi(No.2019JM-084)the State Key Laboratory of Transient Optics and Photonics(No.SKLST202108)the Graduate Innovation and Practical Ability Training Project of Xi’an Shiyou University(No.YCS22213190)。
文摘We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platform.Through the self-imaging effect of multimode interference(MMI)coupler,the demultiplexing function for 1310 nm and 1550 nm wavelengths is implemented.After that,three parallel SWG-based slots are inserted into the MMI section so that the effective refractive index of the modes can be engineered and thus the beat length can be adjusted.Importantly,these three SWG slots significantly reduce the length of the device,which is much shorter than the length of traditional MMI-based wavelength demultiplexers.Ultimately,by using the PSO algorithm,the equivalent refractive index and width of the SWG in a certain range are optimized to achieve the best performance of the wavelength demultiplexer.It has been verified that the device footprint is only 2×30.68μm^(2),and 1 dB bandwidths of larger than 120 nm are acquired at 1310 nm and 1550 nm wavelengths.Meanwhile,the transmitted spectrum shows that the insertion loss(IL)values are below 0.47 dB at both wavelengths when the extinction ratio(ER)values are above 12.65 dB.This inverse design approach has been proved to be efficient in increasing bandwidth and reducing device length.
文摘The field of subwavelength optics has opened new avenues for investigating light–matter interactions by enabling the exploration of novel phenomena at the subwavelength scale. In recent decades,advancements in fundamental understanding and micro–nanotechnologies have significantly propelled the development of subwavelength optics and its practical applications.
基金supported by the National Key Research and Development Program of China under Grant No.2019YFB2203400the National Natural Science Foundation of China under Grant No.61974014.
文摘This work proposes a novel design for a narrowband filter operating in the mid-wave infrared(MWIR)spectrum.The filter is designed with a single layer of slab waveguide decorated with a layer of gold grating arrays.This design demonstrates superior narrowband transmission properties within the MWIR range,which can be explained in the framework of guided-mode resonance(GMR).Since MWIR spectral data is crucial for identifying the chemical fingerprint of man-made objects and natural materials,the GMR filters hold great potential in integration with commercial MWIR photodetectors and focal plane arrays(FPAs)and addressing the market’s demand for ultra-compact spectral detection solutions.Theoretical studies have investigated the influential parameters in the GMR filter design and provided the methods towards optimal filtering performance.The center wavelength of these transmission filters exhibits significant tunability,spanning from 3μm to 5μm across the MWIR spectrum,while the full width at half maximum(FWHM)exhibits remarkable variability,ranging from 5.7 nm to 101.0 nm,enabling the attainment of desired filter performance contingent upon judicious waveguide material selection and optimized structural design.This work forges a path toward integrating multifunctional capabilities into ultra-compact MWIR sensors.
基金upported by the Guangdong Provincial Pearl River Talents Program(Grant No.2019ZT08Z779)the National Natural Science Foundation of China(Grant Nos.U21A20509 and 62205124).
文摘Metal micro-nano grating has received much attention due to its ability to provide high-efficiency light absorption.However,the current research scales of these metal gratings are focused on subwavelengths,and little attention has been paid to the absorption properties of metal gratings at other scales.We investigate the absorption properties of metal gratings based on surface plasmon resonance(SPR)across the scales from superwavelength to subwavelength.Under grazing incidence,we observe continuous strong absorption phenomena from superwavelength to subwavelength Al triangle-groove gratings(TGGs).Perfect absorption is realized at the subwavelength scale,whereas the maximum absorption at all other scales exceeds 74%.The electric field distribution gives the mechanism of the strong absorption phenomenon attributed to SPR on the surface of Al TGGs at different scales.In particular,subwavelength Al TGGs have perfectly symmetric absorption properties for different blaze angles,and the symmetry is gradually broken as the grating period’s scale increases.Furthermore,taking Al gratings with varying groove shapes for example,we extend the equivalence rule of grating grooves to subwavelength from near-wavelength and explain the symmetric absorption properties in Al TGGs.We unify the research of metal grating absorbers outside the subwavelength scale to a certain extent,and these findings also open new perspectives for the design of metal gratings in the future.
基金supported by the National Key Research and Development Program of China(Grant Nos.2021YFA1400700 and 2022YFA1404300)the National Natural Science Foundation of China(Grant Nos.12022403 and 62375123)the Natural Science Foundation of Jiangsu Province(Grant No.BK20243009).
文摘Plasmonic colors are attracting attention for their subwavelength small size,vibrant hues,and environmental sustainability beyond traditional pigments while suffering from angular and/or polarization dependency due to distinct excitations of lattice resonances and/or surface plasmon polaritons(SPPs).Here,we demonstrate the sodium metasurface-based plasmonic color palettes with polarization-independent wide-view angle(approximately>〓〓60 deg in experiment and up to〓〓90 deg in theory)and single-particlelevel pixel size(down to∼60 nm)that integrate both pigment-like and structure coloring advantages,fabricated by the templated nanorod-pixelated solidification of wetted liquid metals.Such intriguing performances are mainly attributed to the particle plasmon dominant spectral response by steering the filling profile and thus the interplay between localized surface plasmons and SPPs.Combining low material cost,potentially scalable manufacturing process,and pronounced optical performance,the proposed sodium-based metasurfaces will provide a promising route for advanced color information technology.
基金supported by the National Natural Science Foundation of China (Grant Nos.62205079,62065006,62125503,and 62261160388)the Natural Science Foundation of Hubei Province of China (Grant No.2023AFA028)+1 种基金the Innovation Project of GUET Graduate Education (Grant No.2023YCXS214)the Innovation Project of Optics Valley Laboratory (Grant No.OVL2021BG004).
文摘A pin-like beam is a kind of structured light with a special intensity distribution that can be against diffraction,which can be seen as a kind of quasi-nondiffracting beam(Q-NDB).Due to its wide applications,recently,numerous researchers have used optical lenses or on-chip integrated optical diffractive elements to generate this kind of beam.We theoretically verify and experimentally demonstrate an all-fiber solution to generate a subwavelength inverted pin beam by integrating a simple plasma structure on the fiber end surface.The output beams generated by two kinds of plasma structures,i.e.,nanoring slot and nanopetal structure,are investigated and measured experimentally.The results show that both the structures are capable of generating subwavelength beams,and the beam generated using the nanopetal structure has the sidelobe suppression ability along the x-axis direction.Our all-fiber device can be flexibly inserted into liquid environments such as cell cultures,blood,and biological tissue fluids to illuminate or stimulate biological cells and molecules in them.It provides a promising fiber-integrated solution for exploring light–matter interaction with subwavelength resolution in the field of biological research.
文摘In this paper, we present the electromagnetic analysis of a rectangular cavity partially filled with a left-handed material slab. Our theoretical investigation shows that there exist novel resonant modes in the cavity, and such a cavity becomes a subwavelength cavity. The eigenvalue equation of the cavity is derived and the resonant frequencies of the novel modes are calculated by using numerical simulation. We also discuss the stability of the novel resonant modes and show the best condition under which a useful rectangular cavity of subwavelength dimensions with tolerable stability is obtained.
基金supported by grants from the Natural Science Foundation of China(Nos.61275167,60878036and 60178023)the Basic Research Project of Shenzhen(Nos.JCYJ20130329103020637,JCYJ20120613112628842,JCYJ20140418095735591 and JC201005280533A)
文摘In this paper, a novel method of a subwavelength binary simple periodic rectangular structure is presented to realize even beam splitting by combining the rigorous couple-wave analysis with the genetic algorithm. Several even splitters in the terahertz region were designed and one of the silicon-based beam splitters designed to separate one incident beam into four emergent beams has total efficiency up to 92.23 %. Zero-order diffraction efficiency was reduced to less than 0.192 % and the error of uniformity decreased to 6.51 9 10-6. These results break the limitation of even beam splitting based on the traditional scalar theory. In addition, the effects of the incident angle, wavelength, as well as the polarizing angle on the diffraction efficiency and uniformity were also investigated.
基金Project supported by National Natural Science Foundation of China Special Foundation of China （Grant Nos 2001CB6104 and 2003CB7169） Sciences, China. （Grant No 10525419）, the National Key Basic Research and the Presidential Foundation of the Chinese Academy Sciences, China.
文摘The extraordinary light transmission through a 200-nm thick gold film when passing through different subwavelength hole arrays is observed experimentally. The sample is fabricated by electron beam lithography and reactive ion etching system. A comparison between light transmissions shows that the hole shape changing from rectangular to diamond strongly affects the transmission intensity although both structures possess the same lattice constant of 600 nm. Moreover, the position of the transmission maximum undergoes a spectral red-shift of about 63 nm. Numerical simulations by using a transfer matrix method reproduce the observed transmission spectrum quite well.
文摘This paper presents a review of recent investigational studies on exciting Surface Plasmon Polaritous (SPPs)in MicroWave (MW)and TeraHertZ (THz)regimes by using subwavelength corrugated patterns on conductive or metal surfaces.This article also describes SPP Microstrip (MS)structures at microwave and terahertz frequencies, and compares their significance with that of conventional MS Transmission Lines (TL),in order to tackle the key challenges of high gain,bandwidth size,compactness,TL losses,and signal integrity in high-end electronic de- vices.Because they have subwavelength properties,surface plasmon polaritous are gaining attention for their improved performance and ability for miniaturization in high-speed dense circuits.They possess comparably minuscule wavelength compared to incident light (photons).Consequently,they can demonstrate stronger spatial confinement and higher local field intensity at optical frequencies.In addition to engineering spoof SPP waveguides,which are created by engraving grooves and slits on metal surfaces to allow operation on at low frequencies (microwave and terahertz),semiconductors with smaller permittivity values and thus lower free charge carrier concentration have been demonstrated as a potential candidate in plasmonic devices.If necessary,further tuning of semiconductor-based SPP structures is aided by controlling the charge carrier concentration through doping,or by external stimuli such as optical illumination or thermal excitation of charge carriers from valence to conduction bands.This article conclusively covers previously elucidated perspectives on manipulating SSPPs in the MW and THz ranges,and emphasizes how these could steer next-generation plasmonic devices.
基金Project supported by the National Basic Research Program (973) of China (No. 2004CB719800) and the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20030284024)
文摘In this paper, the authors present the transmission line (TL) realization of one-dimensional subwavelength resonator formed by a pair of conventional right-handed material (RHM) and left-handed material (LHM). In such resonator, a novel reso- nant mode with the resonant frequency depending on the length ratio of the RH/LH TL sections occurs as a consequence of the full phase compensation due to the backward wave in the LH TL section. The theoretical circuit-model analyses are supported by simulation and experimental evidence on resonators with different RH/LH length ratios.
基金supported by the National Natural Science Foundation of China(Grant Nos.61071031,61331007,and 61107018)the Research Fund for the Doctoral Program of Higher Education of China(Grant Nos.20100185110021 and 20120185130001)+1 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.E02205205)the Project ITR1113,China
文摘In this paper, split-ring-based metamaterial sheets are designed for the purpose of achieving far-field subwavelength focusing, with the aid of a time-reversal technique. The metamaterial sheets are inserted into a subwavelength array consist- ing of four element antennas, with the element spacing being as small as 1/15 of a wavelength. Experiments are performed to investigate the effect of the metamaterial sheets on the focusing resolution. The results demonstrate that in the presence of the metamaterial sheets, the subwavelength array exhibits the ability to achieve super-resolution focusing, while there is no super-resolution focusing without the metamaterial sheets. Further investigation shows that the metamaterial sheets are contributive to achieving super-resolution by weakening the cross-correlations of the channel impulse responses between the array elements.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10604042 and 10674038） and National Basic Research Program of China （Grant No 2006CB302901）.
文摘The transmission characteristics of a metallic film with subwavelength periodic slits are investigated by using the two-dimensional finite-difference time-domain method （2D-FDTD）. Two models are constructed to show the dependance of the transmission spectrum on the slit structure. A sandwiched structure is used to exhibit the contribution of the metallic wall inside slits to the extraordinary high transmission. And a filled slit structure is employed to reflect the relation between the average refractive index inside the slits and the transmission spectrum of the structure. The transmission characteristics of two structures can be explained well with the waveguide resonance theory.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11074145,10874124,and 61275028)
文摘In this paper we study the extraordinary optical transmission of one-dimensional multi-slits in an ideal metal film.The transmissivity is calculated as a function of various structural parameters.The transmissivity oscillates,with the period being just the light wavelength,as a function of the spacing between slits.As the number of slits increases,the transmissivity varies in one of three ways.It can increase,attenuate,or remain basically unchanged,depending on the spacing between slits.Each way is in an oscillatory manner.The slit interaction responsible for the oscillating transmission strength that depends on slit spacing is the subject of more detailed investigation.The interaction most intuitively manifests as a current distribution in the metal surface between slits.We find that this current is attenuated in an oscillating fashion from the slit corners to the center of the region between two adjacent slits,and we present a mathematical expression for its waveform.
基金Supported by the Natural Science Foundation of Hebei Province under Grant Nos A2013402069 and A2013402081
文摘A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.
基金supported by the National Major Research and Development Program(Grant No.2018YFB2200200)the National Science Fund for Distinguished Young Scholars(Grant No.61725503)+3 种基金the National Natural Science Foundation of China(Grant Nos.62175216,61961146003,91950205)Zhejiang Provincial Natural Science Foundation(Grant No.LR22F050001)The Fundamental Research Funds for the Central UniversitiesThe Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang(Grant No.2021R01001).
文摘Compact passive silicon photonic devices with high performance are always desired for future largescale photonic integration.Inverse design provides a promising approach to realize new-generation photonic devices,while it is still very challenging to realize complex photonic devices for most inverse designs reported previously due to the limits of computational resources.Here,we present the realization of several representative advanced passive silicon photonic devices with complex optimization,including a sixchannel mode(de)multiplexer,a broadband 90 deg hybrid,and a flat-top wavelength demultiplexer.These devices are designed inversely by optimizing a subwavelength grating(SWG)region and the multimode excitation and the multimode interference are manipulated.Particularly,such SWG structures are more fabrication-friendly than those random nanostructures introduced in previous inverse designs.The realized photonic devices have decent performances in a broad bandwidth with a low excess loss of<1 dB,which is much lower than that of previous inverse-designed devices.The present inverse design strategy shows great effectiveness for designing advanced photonic devices with complex requirements(which is beyond the capability of previous inverse designs)by using affordable computational resources.
基金supported by the National Natural Science Foundation of China(Grant Nos.61176120,61378059,60977015,61422501,and 11374023)the National Basic Research Program of China(Grant Nos.2012CB933004 and 2015CB932403)Beijing Natural Science Foundation(Grant No.L140007)
文摘In this paper, we demonstrate a spin-controlled directional launching of surface plasmons at the subwavelength scale.Based on the principle of optical spin＇s effect for the geometric phase of light, the nanostructures were designed. The inclination of the structures decides the spin-related geometric phase and their relative positions decide the distance-related phase. Hence, the propagation direction of the generated surface plasmon polaritons（SPPs） can be controlled by the spin of photons. Numerical simulations by the finite difference time domain（FDTD） method have verified our theoretical prediction. Our structure is fabricated on the Au film by using a focused ion beam etching technique. The total size of the surface plasmon polariton（SPP） launcher is 320 nm by 180 nm. The observation of the SPP launching by using scanning near-field optical microscopy is in agreement with our theory and simulations. This result may provide a new way of spin-controlled directional launching of SPP.
文摘A tunable plasmofluidic lens consisting of nanoslit arrays on a metal film is proposed for subwavelength imaging in far field at different wavelengths.The nanoslit arrays with constant depths but varying widths could generate desired optical phase retardations based on the propagation property of the surface plasmon polaritons(SPPs)through the metal-dielectric-metal(MDM)nanoslit waveguide.We demonstrate the tunability of the plasmofluidic lens for subwavelength imaging by changing the surrounding dielectric fluid.This work provides a novel approach for developing integrative tunable plasmofluidic lens for a variety of lab-on-chip applications.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50975128)the National Key Basic Research Program of China (Grant No. 2011CB013004)+2 种基金the Natural Science Foundation of Jiangsu Province,China (Grant No. BK2011462)the National Science Foundation for Postdoctoral Scientists of China (Grant No. 20100481093)Jiangsu Provincial Planned Projects for Postdoctoral Research Funds,China (Grant No. 0902028C)
文摘Analytical nonparaxial vectorial electric field expressions for both Gaussian beams and plane waves diffracted through a circular aperture are derived by using the vector plane angular spectrum method for the first time, which is suitable for the subwavelength aperture and the near-field region. The transverse properties of intensity distributions and their evolutions with the propagating distance, and the power transmission functions for diffracted fields containing the whole field, the evanescent field and the propagating field are investigated in detail, which is helpful for understanding the relationship between evanescent and propagating components in the near-field region and can be applied to apertured near-field scanning optical microscopy.
基金Project supported by the National Natural Science Foundation of China(Grant No.61203211)the Natural Science Foundation of Jiangsu Higher Education Institutions of China(Grant No.13KJB140006)the Foundation for Outstanding Young Teachers of Nanjing University of Information Science&Technology,China(Grant No.20110423)
文摘A novel plasmonic structure consisting of three nano-scaled slits coupled by nano-disk-shaped nanocavities is pro- posed to produce subwavelength focusing and beam bending at optical frequencies. The incident light passes through the metal slits in the form of surface plasmon polaritons （SPPs） ,and then scatters into radiation fields. Numerical simulations using finite-difference time-domain （FDTD） method show that the transmitted fields through the design example can gener- ate light focusing and deflection by altering the refractive index of the coupled nanocavity. The simulation results indicate that the focal spot is beyond the diffraction limit. Light impinges on the surface at an angle to the optical axis will add an extra planar phase front that interferes with the asymmetric phase front of the plasmonic lens, leading to a larger bending angle off the axial direction. The advantages of the proposed plasmonic lens are smaller device size and ease of fabrication. Such geometries offer the potential to be controlled by using nano-positior!i0g systems for applications in dynamic beam shaping and scanning on the nanoscale.
