Aflatoxins B1(AFB1)contamination in agro-food holds great threaten to human and animal health.Conventional test strips for rapid AFB1 visualized monitoring remains challenged by improvement of sensitivity and matrix i...Aflatoxins B1(AFB1)contamination in agro-food holds great threaten to human and animal health.Conventional test strips for rapid AFB1 visualized monitoring remains challenged by improvement of sensitivity and matrix interference resistance.In this case,we developed a portable electrochemiluminescence(ECL)imaging test strip with dual-signal outputs for AFB1 quantification in corn samples.RuPEI@SiO_(2)@Au nanospheres were synthesized for bonding with anti-AFB1 antibody and then colorimetrical signal-reported on test line through the capillary flow at strips.Meanwhile,ECL imaging signal of the constructed carbon-ink-based working electrode on polyvinyl chloride substrate of strips was exported under an applied potential of 1.25 V.The whole ECL test strips not only endowed convenient colorimetric responses but guaranteed quick-witted ECL image distinguishment even at extremely low AFB1 content.The detection limit of this ECL imaging-integrated mode was 10-fold lower than that of only colorimetric mode.Furthermore,satisfactory selectivity,reliability and practicability of the as-proposed ECL test strips were demonstrated.This work offered a promising platform for on-site,accurate and sensitive detection of pollutants in foods.展开更多
The unclear interfacial characteristics of Ag/Cu interface during diffusion welding limit the improvement of mechanical properties of Ag/Cu bimetallic strips.The growth orientation and evolution of Ag and Cu crystals ...The unclear interfacial characteristics of Ag/Cu interface during diffusion welding limit the improvement of mechanical properties of Ag/Cu bimetallic strips.The growth orientation and evolution of Ag and Cu crystals between Ag and Cu strips were investigated by electron backscatter diffraction(EBSD)analysis,and the interfacial properties of various Ag/Cu interfacial configurations were calculated using first-principles calculations to elucidate the diversified interfacial characteristics.Three interface bonding states,including Ag(100)/Cu(100),Ag(110)/Cu(110)and Ag(111)/Cu(111),were preferentially formed in Ag/Cu bimetallic strips during roll bonding.The intensity of Ag(100)/Cu(100)interface increases with the increasing deformation amounts during cold rolling,accompanied by the decreased intensity of Ag(110)/Cu(110)and Ag(111)/Cu(111)interfaces.The largest adsorption work and lowest interface energy of Ag(100)/Cu(100)interface at the“center”position reveal the transition from Ag(110)/Cu(110)and Ag(111)/Cu(111)interfaces to Ag(100)/Cu(100)interface.展开更多
To overcome the inaccuracy problem of the traditional wedge evaluation of steel plates and strips caused by the ran-domness of the thicknesses of two local points and improve the reliability of the wedge index,the dou...To overcome the inaccuracy problem of the traditional wedge evaluation of steel plates and strips caused by the ran-domness of the thicknesses of two local points and improve the reliability of the wedge index,the double-centroid method for the wedge evaluation was proposed,and a model based on the centroid theory was established.Meanwhile,an integral model for the discrete thickness values of the cross-section profiles was derived.The discussion focused on the distinct characteristics of the two-point method,asymmetric method,and double-centroid method in evaluating the asymmetric distribution of cross-sections.The three methods were employed to evaluate the wedge values of both the theoretical and measured cross-sections of steel plates and strips,and the accuracies of three wedge evaluation models were analyzed and discussed.The results showed that the double-centroid method objectively reflects the degree and variation characteristics of the wedge values of the cross-sections of steel plates and strips,and this method is feasible,reliable,and outstanding.展开更多
Surface morphology and roughness are important parameters of surface quality of cold-rolled ultra-thin strip steel.In order to study the effect of Si_(3)N_(4) ceramic work rolls on the surface roughness of SUS304 ultr...Surface morphology and roughness are important parameters of surface quality of cold-rolled ultra-thin strip steel.In order to study the effect of Si_(3)N_(4) ceramic work rolls on the surface roughness of SUS304 ultra-thin strip,ABAQUS finite element model calculation,3D laser profilometry,and other methods were adopted based on the physical characteristics of Si_(3)N_(4) ceramic roll and 9Cr2MoV steel roll,like anti-flattening performance and oil wettability.The surface morphology and roughness of SUS304 ultra-thin strip rolled by different material work rolls under oil lubrication conditions were measured.The results showed that under the rolling force of 10 kN,the maximum flattening amount of Si_(3)N_(4) ceramic roll was reduced by 35.14%compared to that of 9Cr2MoV steel roll.The reduction rate of SUS304 ultra-thin strip rolled by ceramic roll was 34.19%,while that rolled by steel roll was only 22%;Si_(3)N_(4) ceramic roll can further increase the number of alternating convex peaks and concave valleys in the rolled thin strip,reduce the profile steepness,reduce surface roughness,and enhance the planarization effect of surface micro-convex bodies,with improving surface quality and surface glossiness.Finally,the mechanism of Si_(3)N_(4) ceramic roll significantly improving the surface roughness of rolled SUS304 ultra-thin strip was proposed.展开更多
Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with...Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.展开更多
AIM To study the effect of cholecystokinin-octapeptide（CCK-8）and secretin on contractileactivity of isolated gastric muscle strips inguinea pigs.METHODS Each isolated gastric muscle stripwas suspended in a tissue ch...AIM To study the effect of cholecystokinin-octapeptide（CCK-8）and secretin on contractileactivity of isolated gastric muscle strips inguinea pigs.METHODS Each isolated gastric muscle stripwas suspended in a tissue chamber containing5 mL Krebs solution constantly warmed by waterjacked at 37℃ and supplied with a mixed gas of95% O<sub>2</sub> and 5% CO<sub>2</sub> After incubating for lhunder 1 g tension,varied concentrations of CCK-8 and secretin were added respectively in thetissue chamber and the contractile response wasmeasured isometrically on ink-writing recorders.RESULTS CCK-8 could increase①all regionalcircular and longitudinal muscular tension at rest（fundus LM 19.7%±2.1%,P【0.01;fundus CM16.7%±2.2%,P【0.01;gastric body LM 16.8%±2.3%,P【0.01;body CM 12.7%±2.6%,P【0.01;antrum LM 12.3%±1.3%,P【0.01;antrum CM 16.7%±4.5%,P【0.01;pylous CM12.7%±5.0%,P【0.05）;②contractilefrequencies of body LM,both LM and CM ofantrum and pylorus CM（5.1/min±0.2/min to5.6/min±0.2/min,5.9/min±0.2/min to 6.6/min±0.l/min,5.4/min±0.3/min to 6.3/min±0.4/rain,1.3/min±0.2/min to 2.3/min±0.3/min,respectively,P【0.05）;③the mean contractileamplitude of antral circular muscle（58.6%±18.4%,P【0.05）and ④the motility index ofpylorus CM（145.0%±23.8%,P【0.01）,butdecrease the mean contractile amplitude ofgastric body and antral LM（-10.3%±3.3%,-10.5%±4.6%,respectively,P【0.05）.All the CCK-8 effects were not blocked by atropine orindomethacin.Secretin had no effect on gastricsmooth muscle activity.CONCLUSION CCK-8 possessed bothexcitatory and inhibitory action on contractileactivity of different regions of stomach in guineapigs.Its action was not mediated via cholinergicM receptor and endogenous prostagiandinreceptor,展开更多
Ascites remain the commonest complication of decompensated cirrhosis. Spontaneous bacterial peritonitis (SBP) is defined as the infection of ascitic fluid (AF) in the absence of a contiguous source of infection and/or...Ascites remain the commonest complication of decompensated cirrhosis. Spontaneous bacterial peritonitis (SBP) is defined as the infection of ascitic fluid (AF) in the absence of a contiguous source of infection and/or an intraabdominal inflammatory focus. An AF polymorphonuclear (PMN) leucocyte count ≥ 250/mm 3 -irrespective of the AF culture resultis universally accepted nowadays as the best surrogate marker for diagnosing SBP. Frequently the results of the manual or automated PMN count do not reach the hands of the responsible medical personnel in a timely manner. However, this is a crucial step in SBP management. Since 2000, 26 studies (most of them published as full papers) have checked the validity of using leukocyte esterase reagent strips (LERS) in SBP diagnosis. LERS appear to have low sensitivity for SBP, some LERS types more than others. On the other hand, though, LERS have consistently given a high negative predictive value (> 95% in the majority of the studies) and this supports the use of LERS as a preliminary screening tool for SBP diagnosis. Finally, an AF-tailored dipstick has been developed. Within the proper setting, it is set to become the mainstream process for handling AF samples.展开更多
AIM To study the effects of Dangshen [dried root of Codonopsis Pilosula (Franch) Nannf] on contractile activity of isolated gastric muscle strips in rats and its possible mechanism involved.METHODS Each isolated gastr...AIM To study the effects of Dangshen [dried root of Codonopsis Pilosula (Franch) Nannf] on contractile activity of isolated gastric muscle strips in rats and its possible mechanism involved.METHODS Each isolated gastric muscle strip was put in a tissue chamber containing 5ml Krebs solution, constantly warmed by water jacket at 37℃ and supplied with a mixed gas of 95% O2 and 5% CO2. After incubating for 1h with 1g tension, Dangshen of varied concentration was added cumulatively in the tissue chamber at intervals of 2 minutes. The isometrical response was measured on ink-writing recorders.RESULTS Dangshen dose dependence increased the resting tension of longitudinal muscle (LM) of fundus (r=0.96, P＜0.01), the mean contractile amplitude of circular muscle (CM) of the stomach body (r=0.87, P＜0.05) and CM of antrum (r=0.98, P＜0.01), and the motility index CM of pylorus (r=0.87, P＜0.05). Atropine (5×10-8mol/L) or Hexamethonium (10-5mol/L) or Indomethacin (5×10-7mol/L) was given 2 minutes before the administration of Dangshen, it did not abolish its dose related manner. Atropine apparently reduced the increasing action of 10% and 30% Dangshen on the resting tesion of LM of fundus (P＜0.05), 30%, 100% and 200% Dangshen on bodied strips (P＜0.05), 100% and 200% Dangshen on antral strips (P＜0.05). Hexamethonium reduced the increasing action of 10% and 30% Dangshen on the resting tesion of LM of fundus (P＜0.05 and P＜0.05), 30%, 100% and 200% Dangshen on bodied strips (P＜0.05), and 100% and 200% Dangshen on pyloric strips (P＜0.05). Indomethacin inhibited the effect of 10% Dangshen on the resting tesion of LM of fundus (P＜0.05), but did not affect the exciting action of Dangshen on strips of body, antrum and pylorus.CONCLUSION The results showed that Dangshen possessed exciting action on the isolated gastric smooth muscle strips of the rat. The exciting action of Dangshen was partially mediated via cholinergic M and N receptors.展开更多
AIM: To investigate the effect of rhubarb on contractile response of isolated gallbladder muscle strips from guinea pigs and its mechanism.METHODS: Guinea pigs were killed to remove the whole gallbladder. Two or three...AIM: To investigate the effect of rhubarb on contractile response of isolated gallbladder muscle strips from guinea pigs and its mechanism.METHODS: Guinea pigs were killed to remove the whole gallbladder. Two or three smooth muscle strips (8 mm×3mm) were cut along the longitudinal direction. The mucosa on each strip was carefully removed. Each longitudinal muscle strip was suspended in a tissue chamber containing 5 mL Krebs solution (37 ℃), bubbled continuously with 950 mL/L O2 and 50 mL/L CO2. The resting tension (g), mean contractile amplitude (mm),and contractile frequency (waves/min) were simultaneously recorded on recorders. After 2-h equilibration, rhubarb (10, 20, 70, 200, 700, 1 000 g/L) was added cumulatively to the tissue chamber in turns every 2 min to observe their effects on gallbladder.Antagonists were given 3 min before administration of rhubarb to investigate the possible mechanism.RESULTS: Rhubarb increased the resting tension (from 0 to 0.40±0.02, P＜0.001), and decreased the mean contractile amplitude (from 5.22±0.71 to 2.73±0.41,P＜0.001). It also increased the contractile frequency of the gallbladder muscle strips in guinea pigs (from 4.09±0.46to 6.08±0.35, P＜0.001). The stimulation of rhubarb on the resting tension decreased from 3.98±0.22 to 1.58±0.12by atropine (P＜0.001), from3.98±0.22 to 2.09±0.19 by verapamil (P＜0.001) and from 3.98±0.22 to 2.67±0.43by phentolamine (P＜0.005). But the effect was not inhibited by hexamethonium (P＞0.05). In addition, the action of mean amplitude and frequency was not inhibited by the above antagonists.CONCLUSION: Rhubarb can stimulate the motility of isolated gallbladder muscle strips from guinea pigs. The stimulation of rhubarb might be relevant with M receptor,Ca2+ channel and α receptor partly.展开更多
A gas detector 140×140×140 mm^(3)in size,termed the compact active target time projection chamber(CAT-TPC),was developed in this study to measure resonant scattering associated with cluster structures in uns...A gas detector 140×140×140 mm^(3)in size,termed the compact active target time projection chamber(CAT-TPC),was developed in this study to measure resonant scattering associated with cluster structures in unstable nuclei.The CAT-TPC consists of an electronic field cage,double-thick gas-electron-multiplier foils,a general-purpose digital data acquisition system,and a newly developed two-dimensional strip-readout structure.The CAT-TPC was operated using a^(4)He(96%)+CO_(2)(4%)gas mixture at 400 mbar.The working gas also serves as an active target for tracking charged particles.The overall performance of the CAT-TPC was evaluated using a collimated a-particle source.A time resolution of less than 20 ns and a position resolution of less than 0.2 mm were observed along the electron drift direction.Threedimensional images of incident trajectories and scattering events can be clearly reconstructed under an angular resolution of approximately 0.45 degree.展开更多
Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful...Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.展开更多
Revolving parts with complex surface structures are widely used in machinery and mechanical equipment. The ECM process provides its adequacy to cut hard materials with different shapes, and its applications are widely...Revolving parts with complex surface structures are widely used in machinery and mechanical equipment. The ECM process provides its adequacy to cut hard materials with different shapes, and its applications are widely increased, due to its outstanding advantages. In this paper, a new method for machining a convex strips structure on a cylinder by using site directed power interruption（SDPI） in the ECM process is presented. A variable correction value of the power-off time was defined and optimized to obtain the ideal interval for better machining accuracy and stability.The electric field distribution and the simulated convex profiles show that the stray current density can be reduced effectively by using the proposed method. The correction value has an important influence on the machining accuracy. A suitable correction value in the range of 0.6–1.2 s can effectively improve the machining accuracy of the convex strips structure. Experiments were also conducted to verify the proposed method. Results have confirmed that the stray corrosion on the convex strips surface is significantly reduced and the machining accuracy of convex strips structure is remarkably improved by using the proposed method with a suitable correction value in the ECM process. Finally, a convex strip with a height of 2 mm on a thin-wall revolving part was also produced successfully using a correction value of 0.9.展开更多
The chemical compositions and microstructures of the armor strips excavated from the Emperor Qin Shi Huang's mausoleum were examined systematically by using optical microscopy and electron microscopy.It was found ...The chemical compositions and microstructures of the armor strips excavated from the Emperor Qin Shi Huang's mausoleum were examined systematically by using optical microscopy and electron microscopy.It was found that the armor strips were made of pure copper.Based on the morphology of α-Cu recrystal grain and copper sulphide(Cu2S) inclusions in the armor strips,the manufacturing techniques were proposed as follows:smelting pure copper,casting a lamellar plate,forming the cast ingots into sheets through repeated cold forging combined with annealing heat treatment,and finally cutting the sheets into filaments.Furthermore,through the deformation of copper sulphide(Cu2S) inclusions in the strips,the work rate during forging was evaluated and calculated to be close to 75%.展开更多
The two dimensional problem of simply supported laminated isotropic strips with viscoelastic interfaces and under static loading was studied. Exact solution was derived based on the exact elasticity equation and the K...The two dimensional problem of simply supported laminated isotropic strips with viscoelastic interfaces and under static loading was studied. Exact solution was derived based on the exact elasticity equation and the Kelvin-Voigt viscoelastic interfacial model. Numerical computations were performed for a strip consisting of three layers of equal thickness. Results indicated that the response of the laminate was very sensitive to the presence of viscoelastic interfaces.展开更多
Unequal diameter twin-roll casting(UDTRC)can improve the formability,surface conditions,and production efficiency during the fabrication of clad strips.Using Fluent software,a numerical simulation is used to study the...Unequal diameter twin-roll casting(UDTRC)can improve the formability,surface conditions,and production efficiency during the fabrication of clad strips.Using Fluent software,a numerical simulation is used to study the asymmetric heat transfer characteristics of Cu/Al clad strips fabricated by UDTRC.The effects of roller velocity ratio,Cu strip thickness,and inclination angle on the kissing point position,as well as the entire temperature distribution are obtained.The heat transfer model is established,and the mechanism is discussed.The Cu strip and rollers are found to be the main causes of asymmetric heat transfer,indicating that the roller velocity ratio changes the liquid zone proportion in the molten pool.The Cu strip thickness determines the heat absorption capacity and the variations in thermal resistance between the molten Al and the big roller.The inclination angle of the small roller changes the cooling time of big roller to molten Al.Moreover,the microstructure of Al cladding under different roller velocity ratios is examined.The results show significant grain refinement caused by the shear strain along the thickness direction of Al cladding and the intense heat transfer at the moment of contact between the metal Al cladding and Cu strip.展开更多
The following investigations were conducted to evaluate grassy strips of different age for organic arable fields. From September 2009 to October 2010, adult ground beetles were sampled by pitfall traps in three grassy...The following investigations were conducted to evaluate grassy strips of different age for organic arable fields. From September 2009 to October 2010, adult ground beetles were sampled by pitfall traps in three grassy strips (2, 4, and 9 years old), their adjacent cropping areas, their field edges, and a control field (age 0) in Schleswig-Holstein, northern Germany. Carabid assemblages were similar among the fields, strips and edges. Grassy strips and edges had higher species richness and lower activity density than the control field. Activity density increased with increasing distance from the field edge in grassy strips and in the adjacent fields. In cropping areas, species richness andShannon’s H increased with increasing age of strips, whereas evenness and activity density decreased with increasing distance from the field edges. Compared to carnivorous and phytophagous carbides, omnivorous species were affected less by age of strips and distance from field margins. In the strips, species richness of the dominant species increased with age and decreased with distance, but the effect of strip age on species richness was still found in more than150 mfrom the margin. A positive effect of the age of grassy strips on species richness was found for cropping fields, grassy strips and field edges. Old grassy strips also exerted greater influence on the species richness and biodiversity of the adjacent arable fields than the younger strips.展开更多
Asphalt mow strips are typically used as vegetation barriers around guardrail posts in the design of roadside safety structures. Asphalt mow strips have historically been modeled as a rigid layer in simulations;this a...Asphalt mow strips are typically used as vegetation barriers around guardrail posts in the design of roadside safety structures. Asphalt mow strips have historically been modeled as a rigid layer in simulations;this assumption results in significant ground level restraint on the guardrail post. However, experiments have shown that asphalt rupture should be considered in the analysis of the response of guardrail posts embedded in mow strips. The present study investigates the effect of asphalt material properties and mow strip geometry on guardrail post performance using finite element simulations. Numerical simulations are performed and correlated with results from static experiments and material testing. The test simulations and experimental results are used to evaluate the response of guardrail posts with various mow strip designs to predict the level of restraint from the asphalt layer. The model is then used to investigate the effects of asphalt material properties and mow strip geometry on the overall performance of the system. The results demonstrate that including asphalt rupture in numerical simulations is essential in accurately predicting the behavior of guardrail posts installed in asphalt mow strips. In addition, mow strip geometry along with asphalt material properties significantly affect the guardrail post response.展开更多
Electron microscopy and X-ray Energy Dispersive Spectroscopy (XEDS) study on influence of Cu on low carbon hot strips produced by CSP (Compact Strip Production) process has been carried out. The results indicated that...Electron microscopy and X-ray Energy Dispersive Spectroscopy (XEDS) study on influence of Cu on low carbon hot strips produced by CSP (Compact Strip Production) process has been carried out. The results indicated that copper segregation and enrichment at interfacial layer between oxidized surface and steel matrix is the key factor, which results in microcracks and edge flaws on the strips. The primary considerations to prevent detrimental effects from Cu include controlling copper content in proper level, higher soaking temperature and non-oxidizable atmosphere during soaking. Copper sulfide precipitates with nanometers in size were observed, they may be beneficial to the properties of CSP products, and influence of Cu on quality of CSP hot strips is discussed.展开更多
基金financially supported by China Postdoctoral Science Foundation(No.2022T150708)National Key Research and Development Program of China(No.2023YFF1104600)National Natural Science Foundation of China(Nos.32072305,32102089)。
文摘Aflatoxins B1(AFB1)contamination in agro-food holds great threaten to human and animal health.Conventional test strips for rapid AFB1 visualized monitoring remains challenged by improvement of sensitivity and matrix interference resistance.In this case,we developed a portable electrochemiluminescence(ECL)imaging test strip with dual-signal outputs for AFB1 quantification in corn samples.RuPEI@SiO_(2)@Au nanospheres were synthesized for bonding with anti-AFB1 antibody and then colorimetrical signal-reported on test line through the capillary flow at strips.Meanwhile,ECL imaging signal of the constructed carbon-ink-based working electrode on polyvinyl chloride substrate of strips was exported under an applied potential of 1.25 V.The whole ECL test strips not only endowed convenient colorimetric responses but guaranteed quick-witted ECL image distinguishment even at extremely low AFB1 content.The detection limit of this ECL imaging-integrated mode was 10-fold lower than that of only colorimetric mode.Furthermore,satisfactory selectivity,reliability and practicability of the as-proposed ECL test strips were demonstrated.This work offered a promising platform for on-site,accurate and sensitive detection of pollutants in foods.
基金supported by the National Natural Science Foundation of China(No.52474401)the Project funded by the China Postdoctoral Science Foundation(No.2022M712919)+1 种基金Open Project of State Key Laboratory of Advanced Brazing Filler Metals and Technology(SKLABFMT-2021-03)Guangdong Basic and Applied Basic Research Foundation(2023A1515140124).
文摘The unclear interfacial characteristics of Ag/Cu interface during diffusion welding limit the improvement of mechanical properties of Ag/Cu bimetallic strips.The growth orientation and evolution of Ag and Cu crystals between Ag and Cu strips were investigated by electron backscatter diffraction(EBSD)analysis,and the interfacial properties of various Ag/Cu interfacial configurations were calculated using first-principles calculations to elucidate the diversified interfacial characteristics.Three interface bonding states,including Ag(100)/Cu(100),Ag(110)/Cu(110)and Ag(111)/Cu(111),were preferentially formed in Ag/Cu bimetallic strips during roll bonding.The intensity of Ag(100)/Cu(100)interface increases with the increasing deformation amounts during cold rolling,accompanied by the decreased intensity of Ag(110)/Cu(110)and Ag(111)/Cu(111)interfaces.The largest adsorption work and lowest interface energy of Ag(100)/Cu(100)interface at the“center”position reveal the transition from Ag(110)/Cu(110)and Ag(111)/Cu(111)interfaces to Ag(100)/Cu(100)interface.
基金supported by the National Natural Science Foundation of China (Grant No.52305405)the Natural Science Foundation Research Program of Shanxi Province (Grant No.202203021222121)+4 种基金the Major Project of Science and Technology of Shanxi Province (Grant No.20181102016)the Chinese Postdoctoral Science Foundation (Grant No.2021M702544)the Central Government Guides the Special Fund Projects of Local Scientific and Technological Development (YDZX20191400002149)the Open Project of Research Institute of Hai'an-Taiyuan University of Technology (Grant No.2023HA-TYUTKFYF008)the School Fund of Taiyuan University of Technology (Grant No.2022QN007).
文摘To overcome the inaccuracy problem of the traditional wedge evaluation of steel plates and strips caused by the ran-domness of the thicknesses of two local points and improve the reliability of the wedge index,the double-centroid method for the wedge evaluation was proposed,and a model based on the centroid theory was established.Meanwhile,an integral model for the discrete thickness values of the cross-section profiles was derived.The discussion focused on the distinct characteristics of the two-point method,asymmetric method,and double-centroid method in evaluating the asymmetric distribution of cross-sections.The three methods were employed to evaluate the wedge values of both the theoretical and measured cross-sections of steel plates and strips,and the accuracies of three wedge evaluation models were analyzed and discussed.The results showed that the double-centroid method objectively reflects the degree and variation characteristics of the wedge values of the cross-sections of steel plates and strips,and this method is feasible,reliable,and outstanding.
基金supported by the National Natural Science Foundation of China (No.51974196)the Major Program of National Natural Science Foundation of China (No.U22A20188)Central Government Guides the Special Fund Projects of Local Scientific and Technological Development (YDZX20191400002149).
文摘Surface morphology and roughness are important parameters of surface quality of cold-rolled ultra-thin strip steel.In order to study the effect of Si_(3)N_(4) ceramic work rolls on the surface roughness of SUS304 ultra-thin strip,ABAQUS finite element model calculation,3D laser profilometry,and other methods were adopted based on the physical characteristics of Si_(3)N_(4) ceramic roll and 9Cr2MoV steel roll,like anti-flattening performance and oil wettability.The surface morphology and roughness of SUS304 ultra-thin strip rolled by different material work rolls under oil lubrication conditions were measured.The results showed that under the rolling force of 10 kN,the maximum flattening amount of Si_(3)N_(4) ceramic roll was reduced by 35.14%compared to that of 9Cr2MoV steel roll.The reduction rate of SUS304 ultra-thin strip rolled by ceramic roll was 34.19%,while that rolled by steel roll was only 22%;Si_(3)N_(4) ceramic roll can further increase the number of alternating convex peaks and concave valleys in the rolled thin strip,reduce the profile steepness,reduce surface roughness,and enhance the planarization effect of surface micro-convex bodies,with improving surface quality and surface glossiness.Finally,the mechanism of Si_(3)N_(4) ceramic roll significantly improving the surface roughness of rolled SUS304 ultra-thin strip was proposed.
基金Supported by the National Natural Science Foundation of China under Grant No.60173039(国家自然科学基金)the Special Foundation of 985 Project of SUN YAT-SEN University of China (中山大学985工程专项资金)
文摘Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.
基金the Natural Science Foundation of Gansu Province,No.ZR-94-085.
文摘AIM To study the effect of cholecystokinin-octapeptide（CCK-8）and secretin on contractileactivity of isolated gastric muscle strips inguinea pigs.METHODS Each isolated gastric muscle stripwas suspended in a tissue chamber containing5 mL Krebs solution constantly warmed by waterjacked at 37℃ and supplied with a mixed gas of95% O<sub>2</sub> and 5% CO<sub>2</sub> After incubating for lhunder 1 g tension,varied concentrations of CCK-8 and secretin were added respectively in thetissue chamber and the contractile response wasmeasured isometrically on ink-writing recorders.RESULTS CCK-8 could increase①all regionalcircular and longitudinal muscular tension at rest（fundus LM 19.7%±2.1%,P【0.01;fundus CM16.7%±2.2%,P【0.01;gastric body LM 16.8%±2.3%,P【0.01;body CM 12.7%±2.6%,P【0.01;antrum LM 12.3%±1.3%,P【0.01;antrum CM 16.7%±4.5%,P【0.01;pylous CM12.7%±5.0%,P【0.05）;②contractilefrequencies of body LM,both LM and CM ofantrum and pylorus CM（5.1/min±0.2/min to5.6/min±0.2/min,5.9/min±0.2/min to 6.6/min±0.l/min,5.4/min±0.3/min to 6.3/min±0.4/rain,1.3/min±0.2/min to 2.3/min±0.3/min,respectively,P【0.05）;③the mean contractileamplitude of antral circular muscle（58.6%±18.4%,P【0.05）and ④the motility index ofpylorus CM（145.0%±23.8%,P【0.01）,butdecrease the mean contractile amplitude ofgastric body and antral LM（-10.3%±3.3%,-10.5%±4.6%,respectively,P【0.05）.All the CCK-8 effects were not blocked by atropine orindomethacin.Secretin had no effect on gastricsmooth muscle activity.CONCLUSION CCK-8 possessed bothexcitatory and inhibitory action on contractileactivity of different regions of stomach in guineapigs.Its action was not mediated via cholinergicM receptor and endogenous prostagiandinreceptor,
文摘Ascites remain the commonest complication of decompensated cirrhosis. Spontaneous bacterial peritonitis (SBP) is defined as the infection of ascitic fluid (AF) in the absence of a contiguous source of infection and/or an intraabdominal inflammatory focus. An AF polymorphonuclear (PMN) leucocyte count ≥ 250/mm 3 -irrespective of the AF culture resultis universally accepted nowadays as the best surrogate marker for diagnosing SBP. Frequently the results of the manual or automated PMN count do not reach the hands of the responsible medical personnel in a timely manner. However, this is a crucial step in SBP management. Since 2000, 26 studies (most of them published as full papers) have checked the validity of using leukocyte esterase reagent strips (LERS) in SBP diagnosis. LERS appear to have low sensitivity for SBP, some LERS types more than others. On the other hand, though, LERS have consistently given a high negative predictive value (> 95% in the majority of the studies) and this supports the use of LERS as a preliminary screening tool for SBP diagnosis. Finally, an AF-tailored dipstick has been developed. Within the proper setting, it is set to become the mainstream process for handling AF samples.
文摘AIM To study the effects of Dangshen [dried root of Codonopsis Pilosula (Franch) Nannf] on contractile activity of isolated gastric muscle strips in rats and its possible mechanism involved.METHODS Each isolated gastric muscle strip was put in a tissue chamber containing 5ml Krebs solution, constantly warmed by water jacket at 37℃ and supplied with a mixed gas of 95% O2 and 5% CO2. After incubating for 1h with 1g tension, Dangshen of varied concentration was added cumulatively in the tissue chamber at intervals of 2 minutes. The isometrical response was measured on ink-writing recorders.RESULTS Dangshen dose dependence increased the resting tension of longitudinal muscle (LM) of fundus (r=0.96, P＜0.01), the mean contractile amplitude of circular muscle (CM) of the stomach body (r=0.87, P＜0.05) and CM of antrum (r=0.98, P＜0.01), and the motility index CM of pylorus (r=0.87, P＜0.05). Atropine (5×10-8mol/L) or Hexamethonium (10-5mol/L) or Indomethacin (5×10-7mol/L) was given 2 minutes before the administration of Dangshen, it did not abolish its dose related manner. Atropine apparently reduced the increasing action of 10% and 30% Dangshen on the resting tesion of LM of fundus (P＜0.05), 30%, 100% and 200% Dangshen on bodied strips (P＜0.05), 100% and 200% Dangshen on antral strips (P＜0.05). Hexamethonium reduced the increasing action of 10% and 30% Dangshen on the resting tesion of LM of fundus (P＜0.05 and P＜0.05), 30%, 100% and 200% Dangshen on bodied strips (P＜0.05), and 100% and 200% Dangshen on pyloric strips (P＜0.05). Indomethacin inhibited the effect of 10% Dangshen on the resting tesion of LM of fundus (P＜0.05), but did not affect the exciting action of Dangshen on strips of body, antrum and pylorus.CONCLUSION The results showed that Dangshen possessed exciting action on the isolated gastric smooth muscle strips of the rat. The exciting action of Dangshen was partially mediated via cholinergic M and N receptors.
基金Supported by the Key Laboratory of Pre-clinical Research for Chinese HerbsNew Drugs of Gansu Province and The Natural Scientific Foundation of Gansu Province, No. zs021-A25-059-Y
文摘AIM: To investigate the effect of rhubarb on contractile response of isolated gallbladder muscle strips from guinea pigs and its mechanism.METHODS: Guinea pigs were killed to remove the whole gallbladder. Two or three smooth muscle strips (8 mm×3mm) were cut along the longitudinal direction. The mucosa on each strip was carefully removed. Each longitudinal muscle strip was suspended in a tissue chamber containing 5 mL Krebs solution (37 ℃), bubbled continuously with 950 mL/L O2 and 50 mL/L CO2. The resting tension (g), mean contractile amplitude (mm),and contractile frequency (waves/min) were simultaneously recorded on recorders. After 2-h equilibration, rhubarb (10, 20, 70, 200, 700, 1 000 g/L) was added cumulatively to the tissue chamber in turns every 2 min to observe their effects on gallbladder.Antagonists were given 3 min before administration of rhubarb to investigate the possible mechanism.RESULTS: Rhubarb increased the resting tension (from 0 to 0.40±0.02, P＜0.001), and decreased the mean contractile amplitude (from 5.22±0.71 to 2.73±0.41,P＜0.001). It also increased the contractile frequency of the gallbladder muscle strips in guinea pigs (from 4.09±0.46to 6.08±0.35, P＜0.001). The stimulation of rhubarb on the resting tension decreased from 3.98±0.22 to 1.58±0.12by atropine (P＜0.001), from3.98±0.22 to 2.09±0.19 by verapamil (P＜0.001) and from 3.98±0.22 to 2.67±0.43by phentolamine (P＜0.005). But the effect was not inhibited by hexamethonium (P＞0.05). In addition, the action of mean amplitude and frequency was not inhibited by the above antagonists.CONCLUSION: Rhubarb can stimulate the motility of isolated gallbladder muscle strips from guinea pigs. The stimulation of rhubarb might be relevant with M receptor,Ca2+ channel and α receptor partly.
基金supported by the National Key R&D Program of China(No.2018YFA0404403)the National Natural Science Foundation of China(Nos.U1967201,11875074,11875073,and 11961141003)the State Key Laboratory of Nuclear Physics and Technology,PKU(No.NPT2020KFY06)。
文摘A gas detector 140×140×140 mm^(3)in size,termed the compact active target time projection chamber(CAT-TPC),was developed in this study to measure resonant scattering associated with cluster structures in unstable nuclei.The CAT-TPC consists of an electronic field cage,double-thick gas-electron-multiplier foils,a general-purpose digital data acquisition system,and a newly developed two-dimensional strip-readout structure.The CAT-TPC was operated using a^(4)He(96%)+CO_(2)(4%)gas mixture at 400 mbar.The working gas also serves as an active target for tracking charged particles.The overall performance of the CAT-TPC was evaluated using a collimated a-particle source.A time resolution of less than 20 ns and a position resolution of less than 0.2 mm were observed along the electron drift direction.Threedimensional images of incident trajectories and scattering events can be clearly reconstructed under an angular resolution of approximately 0.45 degree.
基金Project(51090385) supported by the National Natural Science Foundation of ChinaProject(2001IB001) supported by Yunnan Provincial Science and Technology Fund, China
文摘Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.
基金supports provided by the State Key Program of the National Natural Science Foundation of China(No.51535006)Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology of China
文摘Revolving parts with complex surface structures are widely used in machinery and mechanical equipment. The ECM process provides its adequacy to cut hard materials with different shapes, and its applications are widely increased, due to its outstanding advantages. In this paper, a new method for machining a convex strips structure on a cylinder by using site directed power interruption（SDPI） in the ECM process is presented. A variable correction value of the power-off time was defined and optimized to obtain the ideal interval for better machining accuracy and stability.The electric field distribution and the simulated convex profiles show that the stray current density can be reduced effectively by using the proposed method. The correction value has an important influence on the machining accuracy. A suitable correction value in the range of 0.6–1.2 s can effectively improve the machining accuracy of the convex strips structure. Experiments were also conducted to verify the proposed method. Results have confirmed that the stray corrosion on the convex strips surface is significantly reduced and the machining accuracy of convex strips structure is remarkably improved by using the proposed method with a suitable correction value in the ECM process. Finally, a convex strip with a height of 2 mm on a thin-wall revolving part was also produced successfully using a correction value of 0.9.
文摘The chemical compositions and microstructures of the armor strips excavated from the Emperor Qin Shi Huang's mausoleum were examined systematically by using optical microscopy and electron microscopy.It was found that the armor strips were made of pure copper.Based on the morphology of α-Cu recrystal grain and copper sulphide(Cu2S) inclusions in the armor strips,the manufacturing techniques were proposed as follows:smelting pure copper,casting a lamellar plate,forming the cast ingots into sheets through repeated cold forging combined with annealing heat treatment,and finally cutting the sheets into filaments.Furthermore,through the deformation of copper sulphide(Cu2S) inclusions in the strips,the work rate during forging was evaluated and calculated to be close to 75%.
文摘The two dimensional problem of simply supported laminated isotropic strips with viscoelastic interfaces and under static loading was studied. Exact solution was derived based on the exact elasticity equation and the Kelvin-Voigt viscoelastic interfacial model. Numerical computations were performed for a strip consisting of three layers of equal thickness. Results indicated that the response of the laminate was very sensitive to the presence of viscoelastic interfaces.
基金Project(51974278)supported by the National Natural Science Foundation of ChinaProject(E2018203446)supported by the Natural Science Foundation of Hebei Province Distinguished Young Fund Project,ChinaProject(2018YFA0707303)supported by the National Key Research and Development Project of China。
文摘Unequal diameter twin-roll casting(UDTRC)can improve the formability,surface conditions,and production efficiency during the fabrication of clad strips.Using Fluent software,a numerical simulation is used to study the asymmetric heat transfer characteristics of Cu/Al clad strips fabricated by UDTRC.The effects of roller velocity ratio,Cu strip thickness,and inclination angle on the kissing point position,as well as the entire temperature distribution are obtained.The heat transfer model is established,and the mechanism is discussed.The Cu strip and rollers are found to be the main causes of asymmetric heat transfer,indicating that the roller velocity ratio changes the liquid zone proportion in the molten pool.The Cu strip thickness determines the heat absorption capacity and the variations in thermal resistance between the molten Al and the big roller.The inclination angle of the small roller changes the cooling time of big roller to molten Al.Moreover,the microstructure of Al cladding under different roller velocity ratios is examined.The results show significant grain refinement caused by the shear strain along the thickness direction of Al cladding and the intense heat transfer at the moment of contact between the metal Al cladding and Cu strip.
文摘The following investigations were conducted to evaluate grassy strips of different age for organic arable fields. From September 2009 to October 2010, adult ground beetles were sampled by pitfall traps in three grassy strips (2, 4, and 9 years old), their adjacent cropping areas, their field edges, and a control field (age 0) in Schleswig-Holstein, northern Germany. Carabid assemblages were similar among the fields, strips and edges. Grassy strips and edges had higher species richness and lower activity density than the control field. Activity density increased with increasing distance from the field edge in grassy strips and in the adjacent fields. In cropping areas, species richness andShannon’s H increased with increasing age of strips, whereas evenness and activity density decreased with increasing distance from the field edges. Compared to carnivorous and phytophagous carbides, omnivorous species were affected less by age of strips and distance from field margins. In the strips, species richness of the dominant species increased with age and decreased with distance, but the effect of strip age on species richness was still found in more than150 mfrom the margin. A positive effect of the age of grassy strips on species richness was found for cropping fields, grassy strips and field edges. Old grassy strips also exerted greater influence on the species richness and biodiversity of the adjacent arable fields than the younger strips.
文摘Asphalt mow strips are typically used as vegetation barriers around guardrail posts in the design of roadside safety structures. Asphalt mow strips have historically been modeled as a rigid layer in simulations;this assumption results in significant ground level restraint on the guardrail post. However, experiments have shown that asphalt rupture should be considered in the analysis of the response of guardrail posts embedded in mow strips. The present study investigates the effect of asphalt material properties and mow strip geometry on guardrail post performance using finite element simulations. Numerical simulations are performed and correlated with results from static experiments and material testing. The test simulations and experimental results are used to evaluate the response of guardrail posts with various mow strip designs to predict the level of restraint from the asphalt layer. The model is then used to investigate the effects of asphalt material properties and mow strip geometry on the overall performance of the system. The results demonstrate that including asphalt rupture in numerical simulations is essential in accurately predicting the behavior of guardrail posts installed in asphalt mow strips. In addition, mow strip geometry along with asphalt material properties significantly affect the guardrail post response.
文摘Electron microscopy and X-ray Energy Dispersive Spectroscopy (XEDS) study on influence of Cu on low carbon hot strips produced by CSP (Compact Strip Production) process has been carried out. The results indicated that copper segregation and enrichment at interfacial layer between oxidized surface and steel matrix is the key factor, which results in microcracks and edge flaws on the strips. The primary considerations to prevent detrimental effects from Cu include controlling copper content in proper level, higher soaking temperature and non-oxidizable atmosphere during soaking. Copper sulfide precipitates with nanometers in size were observed, they may be beneficial to the properties of CSP products, and influence of Cu on quality of CSP hot strips is discussed.
