BACKGROUND Older patients with liver cancer often experience impaired pulmonary function post-surgery,increasing complications and recovery challenges.AIM To investigate the effects of evidence-based stratified manage...BACKGROUND Older patients with liver cancer often experience impaired pulmonary function post-surgery,increasing complications and recovery challenges.AIM To investigate the effects of evidence-based stratified management and stepwise training in the perioperative pulmonary rehabilitation of older patients with liver cancer,providing a basis for clinical application.METHODS In total,120 older patients with liver cancer who underwent surgery at our hospital between February 2023 and February 2025 were selected and randomly divided into study and control groups,with 60 patients in each group.All the patients underwent radical hepatectomy.Postoperatively,the control group received routine nursing management and rehabilitation training,while the study group received evidence-based stratified management combined with stepwise training for a continuous intervention period of one week.Time to first ambulation,length of hospital stays,and average hospitalization costs were recorded.Oxygen saturation(SPO_(2))was measured on postoperative day 1 and day 3.The 6-minute walk distance and Borg scale scores were assessed on postoperative day 1 and day 7,respectively.The postoperative complication rates were recorded.RESULTS The study group had a significantly shorter time to first ambulation,shorter hospital stays,and lower average hospitalization costs than the control group(P<0.05).On postoperative day 1,there was no significant difference in SPO_(2)between the groups(P>0.05);however,on postoperative day 3,the study group had significantly higher SPO_(2)(P<0.05).On postoperative day 7,the study group showed a significantly longer 6-minute walk distance and lower Borg scores than the control group(P<0.05).The incidence of postoperative complications in the study group was 3.33%,which was significantly lower than that in the control group(13.33%;P<0.05).CONCLUSION Implementing evidence-based stratified management combined with stepwise training in the perioperative pulmonary rehabilitation of older patients with liver cancer is improves lung function,reduces complications,and promotes effective recovery,demonstrating significant clinical value.展开更多
The mechanical properties of stratified rocks are closely related not only to the stress state but also to the inherent structural anisotropy,which can be represented by the occurrence of bedding planes.This research ...The mechanical properties of stratified rocks are closely related not only to the stress state but also to the inherent structural anisotropy,which can be represented by the occurrence of bedding planes.This research aims to enhance the understanding of the anisotropic deformation and failure behaviors of stratified rocks by proposing a novel coupled elastoplastic-damage constitutive model.In this constitutive model,a scalar anisotropic parameter(stress-structure mixed invariant)based on the Pietruszczak–Mroz anisotropic theory is incorporated into a nonlinear yield surface,which accounts for the combined effects of the stress state and bedding structure on the anisotropic strength behaviors of stratified rocks.A damage-driven function governs the expansion and contraction of the anisotropic yield surface in the pre-peak strain hardening and post-peak strain-softening regions.The strength and deformation characteristics under multiaxial stress conditions are represented by incorporating the Lode's angle into the yield and plastic potential functions.Numerical simulations are conducted to facilitate a comparison with the conventional and true triaxial compression test data for several stratified rocks.The simulation results demonstrate good agreement with the test data,validating the effectiveness of the proposed constitutive model.This study provides theoretical and technical support for addressing engineering challenges involving stratified rocks.展开更多
Iread with great interest the recent article by Shin,et al.[1]the authors present an important exploration into the use of drug-coated balloon(DCB)in patients aged≥75 years,a demographic increasingly encountered in m...Iread with great interest the recent article by Shin,et al.[1]the authors present an important exploration into the use of drug-coated balloon(DCB)in patients aged≥75 years,a demographic increasingly encountered in modern cardiovascular practice.The authors conducted a retrospective analysis involving 2050 elderly patients(aged≥75 years)undergoing successful percutaneous coronary intervention(PCI).展开更多
Geological sequestration of carbon dioxide(CO_(2))entails the long-term storage of captured emissions from CCUS(Carbon Capture,Utilization,and Storage)facilities in deep saline aquifers to mitigate greenhouse gas accu...Geological sequestration of carbon dioxide(CO_(2))entails the long-term storage of captured emissions from CCUS(Carbon Capture,Utilization,and Storage)facilities in deep saline aquifers to mitigate greenhouse gas accumulation.Among various trapping mechanisms,dissolution trapping is particularly effective in enhancing storage security.However,the stratified structure of saline aquifers plays a crucial role in controlling the efficiency of CO_(2) dissolution into the resident brine.In this study,a two-dimensional numerical model of a stratified saline aquifer is developed,integrating both two-phase flow and mass transfer dynamics.The model captures the temporal evolution of gas saturation,reservoir pressure,and CO_(2) dissolution behavior under varying geological and operational conditions.Specifically,the effects of porosity heterogeneity,permeability distribution,and injection rate on the dissolution process are examined,and sequestration efficiencies across distinct stratigraphic layers are compared.Simulation results reveal that in the early phase of CO_(2) injection,the plume spreads radially along the lower portion of the aquifer.With continued injection,high-saturation regions expand upward and eventually accumulate beneath the shale and caprock layers.Pressure within the reservoir rises in response to CO_(2) injection,propagating both vertically and laterally.CO_(2) migration and dissolution are strongly influenced by reservoir properties,with progressive dissolution occurring in the pore spaces of individual layers.High-porosity zones favor CO_(2) accumulation and enhance local dissolution,whereas low-porosity regions facilitate vertical diffusion.An increase in porosity from 0.25 to 0.30 reduces the radial extent of dissolution in the high-permeability layer by 16.5%.Likewise,increasing permeability promotes radial dispersion;each 10 mD increment extends the CO_(2) dissolution front by approximately 18 m.Elevated injection rates intensify both vertical and lateral plume migration:every 0.25×10^(−6) m/s increase in rate yields an average 100–120 m increase in radial dissolution distance within high-permeability zones.展开更多
The backfill should keep stable in the primary stope when mining an adjacent secondary stope in subsequent open stoping mining methods,and the large-size mined-out area is usually backfilled by multiple backfilling be...The backfill should keep stable in the primary stope when mining an adjacent secondary stope in subsequent open stoping mining methods,and the large-size mined-out area is usually backfilled by multiple backfilling before the recovery of a secondary stope,resulting in a layered structure of backfill in stope.Therefore,it is significant to investigate the deformation responses and mechanical properties of stratified cemented tailings backfill(SCTB)with different layer structures to remain self-standing as an artificial pillar in the primary stope.The current work examined the effects of enhance layer position(1/3,1/2,and 2/3)and thickness ratio(0,0.1,0.2,and 0.3)on the mechanical properties,deformation,energy evolution,microstructures,and failure modes of SCTB.The results demonstrate that the incorporation of an enhance layer significantly strengthens the deformation and strength of SCTB.Under a confining pressure of 50 kPa,the peak deviatoric stress rises from 525.6 to 560.3,597.1,and 790.5 kPa as the thickness ratio of enhance layer is increased from 0 to 0.1,0.2,and 0.3,representing a significant increase of 6.6%,13.6%,and 50.4%.As the confining pressure increases,the slopes of the curves in the elastic stage become steep,and the plastic phase is extended accordingly.Additionally,the incorporation of the enhance layer significantly improves the energy storage linit of SCTB specimen.As the thickness ratio of the enhance layer increases from 0 to 0.1,0.2,and 0.3,the elastic energy rises from 0.54 to 0.67,0.84,and 1.00 MJ·m^(-3),representing a significant increase of 24.1%,55.6%,and 85.2%.The internal friction angles and cohesions of the SCTB specimens are higher than those of the CTB specimens,however,the cohesion is more susceptible to enhance layer position and thickness ratio than the internal friction angle.The failure style of the SCTB specimen changes from shear failure to splitting bulging failure and shear bulging failure with the presence of an enhance layer.The crack propagation path is significantly blocked by the enhance layer.The findings are of great significance to the application and stability of the SCTB in subsequent stoping backfilling mines.展开更多
Stratified flow is a common phenomenon in horizontal tubes of two-phase flow systems. However, the existing methods for calculating the wetted angle of the flat interface model and the central angle of the two-circle ...Stratified flow is a common phenomenon in horizontal tubes of two-phase flow systems. However, the existing methods for calculating the wetted angle of the flat interface model and the central angle of the two-circle model rely on solving implicit transcendental equations, which require iterative numerical root-finding methods,thereby introducing computational complexity and inefficiency. This paper proposes the high-precision explicit approximate solutions for the two models, directly correlating the geometric parameters with the flow parameters, thus significantly enhancing the efficiency and accuracy of two-phase flow analysis.展开更多
We present a method to unify the calculation of Green＇s functions for an electromagnetic（EM） transmitting source embedded in a homogeneous stratified medium.A virtual interface parallel to layer interfaces is intro...We present a method to unify the calculation of Green＇s functions for an electromagnetic（EM） transmitting source embedded in a homogeneous stratified medium.A virtual interface parallel to layer interfaces is introduced through the source location.The potentials for Green＇s function are derived by decomposing the partial wave solutions to Helmholtz＇s equations into upward and downward within boundaries.The amplitudes of the potentials in each stratum are obtained recursively from the initial amplitudes at the source level.The initial amplitudes are derived by coupling with the transmitting sources and following the discontinuity of the tangential electric and magnetic fields at the source interface.Only the initial terms are related to the transmitting sources and thus need to be modified for different transmitters,whereas the kernel connected with the stratified media stays unchanged.Hence,the present method can be easily applied to EM transmitting sources with little modification.The application of the proposed method to the marine controlled-source electromagnetic method（MCSEM） demonstrates its simplicity and flexibility.展开更多
Combining the advantages of the stratified sampling and the importance sampling, a stratified importance sampling method （SISM） is presented to analyze the reliability sensitivity for structure with multiple failure...Combining the advantages of the stratified sampling and the importance sampling, a stratified importance sampling method （SISM） is presented to analyze the reliability sensitivity for structure with multiple failure modes. In the presented method, the variable space is divided into several disjoint subspace by n-dimensional coordinate planes at the mean point of the random vec- tor, and the importance sampling functions in the subspaces are constructed by keeping the sampling center at the mean point and augmenting the standard deviation by a factor of 2. The sample size generated from the importance sampling function in each subspace is determined by the contribution of the subspace to the reliability sensitivity, which can be estimated by iterative simulation in the sampling process. The formulae of the reliability sensitivity estimation, the variance and the coefficient of variation are derived for the presented SISM. Comparing with the Monte Carlo method, the stratified sampling method and the importance sampling method, the presented SISM has wider applicability and higher calculation efficiency, which is demonstrated by numerical examples. Finally, the reliability sensitivity analysis of flap structure is illustrated that the SISM can be applied to engineering structure.展开更多
Invasive stratified mucin-producing carcinoma(ISMC)is a recently described histologic variant of high-risk human papillomavirus(HPV)-associated endocervical adenocarcinoma,as the putative invasive counterpart of the s...Invasive stratified mucin-producing carcinoma(ISMC)is a recently described histologic variant of high-risk human papillomavirus(HPV)-associated endocervical adenocarcinoma,as the putative invasive counterpart of the stratified mucin-producing intraepithelial lesion(SMILE).ISMC can display variable architectural patterns and usually coexists with other more conventional types of HPV-associated carcinomas,which makes diagnosis and differential diagnosis of ISMC is difficult for pathologists.Moreover,the prognosis of ISMC is still controversial.We analyzed 6 ISMCs with detailed pathological and clinical information.Intraepithelial lesion,including 1 high-grade squamous intraepithelial lesion and 1 SMILE,was found.Various architectures were observed(including nest,glandular,solid,trabecular,and single cell).Nuclear peripheral palisading,apoptotic bodies and mitoses,and variable cytoplasmic mucin vacuoles were seen in all of our cases.The predominance of neutrophils infiltration was seen in only 1 tumor.All the tumors infiltrated the cervical stroma in Silva pattern C manner.p63 and/or p40 was characteristically expressed in the peripheral cells in only 2 cases.High-risk HPV infection was observed in 3/3 detected cases.All the patients were alive during the follow-up time.Recognition of this infrequent tumor may help pathologists and oncologists for an accurate diagnosis and a better understanding of the clinicopathological behavior.展开更多
This paper mainly addresses maximum likelihood estimation for a response-selective stratified sampling scheme, the basic stratified sampling (BSS), in which the maximum subsample size in each stratum is fixed. We deri...This paper mainly addresses maximum likelihood estimation for a response-selective stratified sampling scheme, the basic stratified sampling (BSS), in which the maximum subsample size in each stratum is fixed. We derived the complete-data likelihood for BSS, and extended it as a full-data likelihood by incorporating incomplete data. We also similarly extended the empirical proportion likelihood approach for consistent and efficient estimation. We conducted a simulation study to compare these two new approaches with the existing estimation methods in BSS. Our result indicates that they perform as well as the standard full information likelihood approach. Methods were illustrated using a growth model for fish size at age, including between-individual variability. One of our major conclusions is that the fully observed BSS data, the partially observed data used for stratification, and the sampling strategy are all important in constructing a consistent and efficient estimator.展开更多
The practice of stratified English teaching is determined by the features of vocational education. In addition, it is an inexorable trend of current higher education reform, and also a fundamental demand of higher voc...The practice of stratified English teaching is determined by the features of vocational education. In addition, it is an inexorable trend of current higher education reform, and also a fundamental demand of higher vocational education and quality-oriented education. This thesis argues for the need of stratified English teaching in high vocational colleges.展开更多
Multiple filling of gobs will lead to a layered structure of the backfill.To explore the influence of layering structure on the mechanical properties and failure modes of backfill,different backfill specimens were pre...Multiple filling of gobs will lead to a layered structure of the backfill.To explore the influence of layering structure on the mechanical properties and failure modes of backfill,different backfill specimens were prepared with a cement/sand ratio of 1:4,a slurry concentration of 75%,and backfilling times of 1,2,3 and 4,separately.Triaxial cyclic loading and unloading experiments were carried out.The results show that with an increase in backfilling time,the peak strength of backfill decreases as a polynomial function and the peak strain increases as an exponential function.The cyclic load enhances the linear characteristic of backfill deformation.The loading and unloading deformation moduli have a linear negative correlation with the backfilling time.The unloading deformation modulus is always slightly higher than the loading deformation modulus.The failure modes of stratified backfill are mainly characterized by conjugate shear failure at the upper layer and tensile failure across the layer plane,and there is usually no damage in the lower layer away from the loading area.展开更多
An important diplogenetic mineralization event superimposed on pre-existing exhalation sediments in the Tongling area, Anhui province, was triggered by widespread granitic magmatism along the northeastern margin of th...An important diplogenetic mineralization event superimposed on pre-existing exhalation sediments in the Tongling area, Anhui province, was triggered by widespread granitic magmatism along the northeastern margin of the Yangtze Block during 140–135 Ma under extensional tectonic circumstances following the collision between the North China and Yangtze blocks. The main orebodies of the Dongguashan copper deposit, a typical diplogenetic stratified deposit among many polymetallic ore deposits in China, are hosted by strata between Upper Devonian sandstone and Carboniferous limestone, and its mineralization was genetically related to the Qingshanjiao intrusive. The Rb-Sr isotopic isochron of the Qingshanjiao intrusive yields an age of about 136.5±1.4 Ma. The ore-forming fluid reflected by the inclusion fluid in quartz veins is characterized by high temperature and high salinity, and its age was also determined by Rb -Sr isotope dating as 134±11 Ma. Oxygen and hydrogen isotope composition data suggest that the ore-forming fluid was derived mainly from magmatism. By integrating these isotopic dating data, characteristics of fluid inclusions and the geology of the deposit, the mineralization of the Dongguashan copper deposit is divided into two stages. First, a stratiform sedimentary deposit or protore layer formed in the Late Devonian to the Early Carboniferous, while in the second stage the pre-existing protore was superimposed by hydrothermal fluid that was derived from the Yanshanian magmatic activities occurring around 135 Ma ago. This two-stage mineralization formed the Dongguashan statiform copper deposit. Associated “porphyry” mineralization found in the bottom of and in surrounding intrusive rocks of the orebodies might have occurred in the same period as a second-stage mineralization of this deposit.展开更多
The development of promising zinc anodes mainly suffers from their low plating/stripping coulombic efficiencies when using aqueous electrolyte,which are mainly associated with the interfacial formation of irreversible...The development of promising zinc anodes mainly suffers from their low plating/stripping coulombic efficiencies when using aqueous electrolyte,which are mainly associated with the interfacial formation of irreversible by-products.It is urgent to develop technologies that can solve this issue fundamentally.Herein,we report an artificial Sc_(2)O_(3) protective film to construct a new class of interface for Zn anode.The density functional theory simulation and experimental results have proven that the interfacial side reaction was inhibited via a stratified adsorption effect between this artificial layer and Zn anode.Benefiting from this novel structure,the Sc_(2)O_(3)-coated Zn anode can run for more than 100 cycles without short circuit and exhibit low voltage hysteresis,and the coulombic efficiency increases by 1.2%.Importantly,it shows a good application prospect when matched with two of popular manganese-based and vanadium-based cathodes.The excellent electrochemical performance of the Sc_(2)O_(3)-coated Zn anode highlights the importance of rational design of anode materials and demonstrates a good way for developing high-performance Zn anodes with long lifespan and high efficiency.展开更多
Because of gravitational differentiation of multi-phase fluids, gas-water flow is usually stratified in highly inclined or horizontal gas wells. By using electrode arrays to scan flowing fluids, electromagnetic tomogr...Because of gravitational differentiation of multi-phase fluids, gas-water flow is usually stratified in highly inclined or horizontal gas wells. By using electrode arrays to scan flowing fluids, electromagnetic tomography can identify the flow patterns of mixed fluid from the different electrical properties of gas and water. The responses for different gas-water interface locations were calculated and then physical measurements were undertaken. We compared the results of the numerical simulation with the experimental data, and found that the response characteristics were consistent in the circumstances of uniform physical fields and stratified flows. By analyzing the signal characteristics, it is found that, with the change of the interface location, the response curves showed ＂steps＂ whose position and width were decided by the location of fluid interface. The measurement accuracy of this method depended on the vertical distance between adjacent electrodes. The results showed that computer simulation can simulate the measurement of the electromagnetic tomography accurately, so the physical experiment can be replaced.展开更多
This article aims to describe the influence of diffuse pollution on the temporal and spatial characteristics of natural organic matter （NOM） in a stratified dam reservoir, the Daecheong Dam, on the basis of intensiv...This article aims to describe the influence of diffuse pollution on the temporal and spatial characteristics of natural organic matter （NOM） in a stratified dam reservoir, the Daecheong Dam, on the basis of intensive observation results and the dynamic water quality simulation using CE-QUAL-W2. Turbidity is regarded as a comprehensive representation of allochothonous organic matter from diffuse sources in storm season because the turbidity concentration showed reasonable significance in a statistical correlation with the UV absorbance at 254 nm and total phosphorus. CE-QUAL-W2 simulation results showed good consistency with the observed data in terms of dissolved organic matter （DOM） including refractory dissolved organic carbon （RDOC） and labile DOC and also well explained the internal movement of constituents and stratification phenomenon in the reservoir. Instead turbidity and NOM were related well in the upper region of the reservoir according to flow distance, gradually as changing to dissolved form of organic matter, RDOM affected organic matter concentration of reservoir water quality compared to turbidity. To control the increase of soluble organic matters in the dam reservoir, appropriate dam water discharge gate operation provided effective measurement. Because of the gate operation let avoid the accumulation of organic matter within a dam reservoir by shorten of turbid regime retention time.展开更多
The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in m...The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in mountainous areas. In this study, an analytical approach based on the energy equilibrium principle is presented to solve the flexural buckling stability of stratified rock slopes within the framework of multilayer beam theory. The generalized HoekBrown failure criterion is introduced to reflect the influences of slope size(scale effects) on the buckling stability. Subsequently, numerical and physical modellings from previous literatures are employed to validate the proposed approach. Furthermore, a practical case of Bawang Mountain landslide is also used for the comparative analysis. The study shows that the present analytical approach is capable to provide a more reasonable assessment for the buckling failure of stratified rock slopes, compared with several existing analytical approaches. Finally, a detailed parametric study is implemented, and the results indicate that the effects of rock strength, rock deformation modulus, geological strength index, layer thickness and disturbance degree of rock mass on the buckling failure of stratified rock slopes are more significant than that of rock type and slope angle.展开更多
A stratified rock mass model was founded by FLAC^3D. The failure mode and anisotropic characteristic of strength for stratified rock mass were analyzed. The analysis results show that the numerical simulation can visu...A stratified rock mass model was founded by FLAC^3D. The failure mode and anisotropic characteristic of strength for stratified rock mass were analyzed. The analysis results show that the numerical simulation can visually reflect the failure modes of rock samples under different inclination angles β of structural plane. The stiffness of rock sample before peak strength changes in the compressive procedure. With the increase of β, the compressive strength σc of rock sample decreases firstly and then increases; when β is in the range of 20°-30° and 80°-90°, σc has the largest sensitivity to r; while β falls in the range of 30°-70°, σc varies little. When φj〈β〈90° （ φj is friction angle of structure plane）, the results obtained from numerical simulation and theoretical analysis are in almost the same values; while β〈 φj or β=90°, they are in great different values. The results obtained from theoretical analysis are obvious larger than those from numerical simulation; and the results from numerical simulation can reflect the difference of compressive strength of rock samples for the two situations of β≥φj and β=90°, which is in more accordance with the real situation.展开更多
Vortex/flame interaction is an important mechanism for unsteady combustion in a swirl combustion system. Technology of low emission stirred swirl （TeLESS）, which is characterized with stratified swirl flow, has been...Vortex/flame interaction is an important mechanism for unsteady combustion in a swirl combustion system. Technology of low emission stirred swirl （TeLESS）, which is characterized with stratified swirl flow, has been developed in Beihang University to reduce NOx emission. However, large-scale flow structure would be induced in strong swirl flow. Experiments and computational fluid dynamics （CFD） simulation were carried out to investigate the unsteady flow feature and its mechanism in TeLESS combustor. Hotwire was firstly applied to testing the unsteady flow feature and a distinct mode with 2244 Hz oscillation frequency occurred at the pilot swirl outlet. The flow mode amplitude decayed convectively. Large eddy simulation （LES） was then applied to predicting this flow mode and know about its mechanism. The deviation of mode prediction compared with hotwire test was 0.8%. The spiral isobaric structure in pilot flow passage indicates that precessing vortex core （PVC） existed. The velocity spectrum and phase lag analysis suggest that the periodic movement at the pilot outlet was dominated by precessing movement. Negative tangen- tial momentum gradient reflects that the swirl flow was unstable. Another phenomenon was found out that the PVC movement was intermittently rotated alon~ the symmetric axis.展开更多
The principal component analysis （PCA） is used to analyze the high dimen- sional chemistry data of laminar premixed/stratified flames under strain effects. The first few principal components （PCs） with larger cont...The principal component analysis （PCA） is used to analyze the high dimen- sional chemistry data of laminar premixed/stratified flames under strain effects. The first few principal components （PCs） with larger contribution ratios axe chosen as the tabu- lated scalars to build the look-up chemistry table. Prior tests show that strained premixed flame structure can be well reconstructed. To highlight the physical meanings of the tabu- lated scalars in stratified flames, a modified PCA method is developed, where the mixture fraction is used to replace one of the PCs with the highest correlation coefficient. The other two tabulated scalars are then modified with the Schmidt orthogonalization. The modified tabulated scalars not only have clear physical meanings, but also contain passive scalars. The PCA method has good commonality, and can be extended for building the thermo-chemistry table including strain rate effects when different fuels are used.展开更多
文摘BACKGROUND Older patients with liver cancer often experience impaired pulmonary function post-surgery,increasing complications and recovery challenges.AIM To investigate the effects of evidence-based stratified management and stepwise training in the perioperative pulmonary rehabilitation of older patients with liver cancer,providing a basis for clinical application.METHODS In total,120 older patients with liver cancer who underwent surgery at our hospital between February 2023 and February 2025 were selected and randomly divided into study and control groups,with 60 patients in each group.All the patients underwent radical hepatectomy.Postoperatively,the control group received routine nursing management and rehabilitation training,while the study group received evidence-based stratified management combined with stepwise training for a continuous intervention period of one week.Time to first ambulation,length of hospital stays,and average hospitalization costs were recorded.Oxygen saturation(SPO_(2))was measured on postoperative day 1 and day 3.The 6-minute walk distance and Borg scale scores were assessed on postoperative day 1 and day 7,respectively.The postoperative complication rates were recorded.RESULTS The study group had a significantly shorter time to first ambulation,shorter hospital stays,and lower average hospitalization costs than the control group(P<0.05).On postoperative day 1,there was no significant difference in SPO_(2)between the groups(P>0.05);however,on postoperative day 3,the study group had significantly higher SPO_(2)(P<0.05).On postoperative day 7,the study group showed a significantly longer 6-minute walk distance and lower Borg scores than the control group(P<0.05).The incidence of postoperative complications in the study group was 3.33%,which was significantly lower than that in the control group(13.33%;P<0.05).CONCLUSION Implementing evidence-based stratified management combined with stepwise training in the perioperative pulmonary rehabilitation of older patients with liver cancer is improves lung function,reduces complications,and promotes effective recovery,demonstrating significant clinical value.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52109143 and 12062026)the Open Research Fund of State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin(China Institute of Water Resources and Hydropower Research)(Grant No.IWHRSKL-KF202305).
文摘The mechanical properties of stratified rocks are closely related not only to the stress state but also to the inherent structural anisotropy,which can be represented by the occurrence of bedding planes.This research aims to enhance the understanding of the anisotropic deformation and failure behaviors of stratified rocks by proposing a novel coupled elastoplastic-damage constitutive model.In this constitutive model,a scalar anisotropic parameter(stress-structure mixed invariant)based on the Pietruszczak–Mroz anisotropic theory is incorporated into a nonlinear yield surface,which accounts for the combined effects of the stress state and bedding structure on the anisotropic strength behaviors of stratified rocks.A damage-driven function governs the expansion and contraction of the anisotropic yield surface in the pre-peak strain hardening and post-peak strain-softening regions.The strength and deformation characteristics under multiaxial stress conditions are represented by incorporating the Lode's angle into the yield and plastic potential functions.Numerical simulations are conducted to facilitate a comparison with the conventional and true triaxial compression test data for several stratified rocks.The simulation results demonstrate good agreement with the test data,validating the effectiveness of the proposed constitutive model.This study provides theoretical and technical support for addressing engineering challenges involving stratified rocks.
文摘Iread with great interest the recent article by Shin,et al.[1]the authors present an important exploration into the use of drug-coated balloon(DCB)in patients aged≥75 years,a demographic increasingly encountered in modern cardiovascular practice.The authors conducted a retrospective analysis involving 2050 elderly patients(aged≥75 years)undergoing successful percutaneous coronary intervention(PCI).
基金supported by the National Natural Science Foundation of China(No.52306187)the Fundamental Research Funds for the Central Universities of China(Grant No.3132024205)the Open Fund of Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education(Grant No.LOEC-202004).
文摘Geological sequestration of carbon dioxide(CO_(2))entails the long-term storage of captured emissions from CCUS(Carbon Capture,Utilization,and Storage)facilities in deep saline aquifers to mitigate greenhouse gas accumulation.Among various trapping mechanisms,dissolution trapping is particularly effective in enhancing storage security.However,the stratified structure of saline aquifers plays a crucial role in controlling the efficiency of CO_(2) dissolution into the resident brine.In this study,a two-dimensional numerical model of a stratified saline aquifer is developed,integrating both two-phase flow and mass transfer dynamics.The model captures the temporal evolution of gas saturation,reservoir pressure,and CO_(2) dissolution behavior under varying geological and operational conditions.Specifically,the effects of porosity heterogeneity,permeability distribution,and injection rate on the dissolution process are examined,and sequestration efficiencies across distinct stratigraphic layers are compared.Simulation results reveal that in the early phase of CO_(2) injection,the plume spreads radially along the lower portion of the aquifer.With continued injection,high-saturation regions expand upward and eventually accumulate beneath the shale and caprock layers.Pressure within the reservoir rises in response to CO_(2) injection,propagating both vertically and laterally.CO_(2) migration and dissolution are strongly influenced by reservoir properties,with progressive dissolution occurring in the pore spaces of individual layers.High-porosity zones favor CO_(2) accumulation and enhance local dissolution,whereas low-porosity regions facilitate vertical diffusion.An increase in porosity from 0.25 to 0.30 reduces the radial extent of dissolution in the high-permeability layer by 16.5%.Likewise,increasing permeability promotes radial dispersion;each 10 mD increment extends the CO_(2) dissolution front by approximately 18 m.Elevated injection rates intensify both vertical and lateral plume migration:every 0.25×10^(−6) m/s increase in rate yields an average 100–120 m increase in radial dissolution distance within high-permeability zones.
基金financially supported by the Fundamental Research Funds for the Central Universities,China(No.2023JCCXNY01)Guangxi Key Technologies R&D Program,China(No.2022AB31022).
文摘The backfill should keep stable in the primary stope when mining an adjacent secondary stope in subsequent open stoping mining methods,and the large-size mined-out area is usually backfilled by multiple backfilling before the recovery of a secondary stope,resulting in a layered structure of backfill in stope.Therefore,it is significant to investigate the deformation responses and mechanical properties of stratified cemented tailings backfill(SCTB)with different layer structures to remain self-standing as an artificial pillar in the primary stope.The current work examined the effects of enhance layer position(1/3,1/2,and 2/3)and thickness ratio(0,0.1,0.2,and 0.3)on the mechanical properties,deformation,energy evolution,microstructures,and failure modes of SCTB.The results demonstrate that the incorporation of an enhance layer significantly strengthens the deformation and strength of SCTB.Under a confining pressure of 50 kPa,the peak deviatoric stress rises from 525.6 to 560.3,597.1,and 790.5 kPa as the thickness ratio of enhance layer is increased from 0 to 0.1,0.2,and 0.3,representing a significant increase of 6.6%,13.6%,and 50.4%.As the confining pressure increases,the slopes of the curves in the elastic stage become steep,and the plastic phase is extended accordingly.Additionally,the incorporation of the enhance layer significantly improves the energy storage linit of SCTB specimen.As the thickness ratio of the enhance layer increases from 0 to 0.1,0.2,and 0.3,the elastic energy rises from 0.54 to 0.67,0.84,and 1.00 MJ·m^(-3),representing a significant increase of 24.1%,55.6%,and 85.2%.The internal friction angles and cohesions of the SCTB specimens are higher than those of the CTB specimens,however,the cohesion is more susceptible to enhance layer position and thickness ratio than the internal friction angle.The failure style of the SCTB specimen changes from shear failure to splitting bulging failure and shear bulging failure with the presence of an enhance layer.The crack propagation path is significantly blocked by the enhance layer.The findings are of great significance to the application and stability of the SCTB in subsequent stoping backfilling mines.
基金supported by the General Research Fund from the Research Grants Council of the Hong Kong Special Administrative Region of China (No. PolyU 15210624)。
文摘Stratified flow is a common phenomenon in horizontal tubes of two-phase flow systems. However, the existing methods for calculating the wetted angle of the flat interface model and the central angle of the two-circle model rely on solving implicit transcendental equations, which require iterative numerical root-finding methods,thereby introducing computational complexity and inefficiency. This paper proposes the high-precision explicit approximate solutions for the two models, directly correlating the geometric parameters with the flow parameters, thus significantly enhancing the efficiency and accuracy of two-phase flow analysis.
基金supported by CNSF(Granted No.40874050)Chinese High Technology Project(Granted No.2011YQ05006010)
文摘We present a method to unify the calculation of Green＇s functions for an electromagnetic（EM） transmitting source embedded in a homogeneous stratified medium.A virtual interface parallel to layer interfaces is introduced through the source location.The potentials for Green＇s function are derived by decomposing the partial wave solutions to Helmholtz＇s equations into upward and downward within boundaries.The amplitudes of the potentials in each stratum are obtained recursively from the initial amplitudes at the source level.The initial amplitudes are derived by coupling with the transmitting sources and following the discontinuity of the tangential electric and magnetic fields at the source interface.Only the initial terms are related to the transmitting sources and thus need to be modified for different transmitters,whereas the kernel connected with the stratified media stays unchanged.Hence,the present method can be easily applied to EM transmitting sources with little modification.The application of the proposed method to the marine controlled-source electromagnetic method（MCSEM） demonstrates its simplicity and flexibility.
基金National Natural Science Foundation of China (10572117,10802063,50875213)Aeronautical Science Foundation of China (2007ZA53012)+1 种基金New Century Program For Excellent Talents of Ministry of Education of China (NCET-05-0868)National High-tech Research and Development Program (2007AA04Z401)
文摘Combining the advantages of the stratified sampling and the importance sampling, a stratified importance sampling method （SISM） is presented to analyze the reliability sensitivity for structure with multiple failure modes. In the presented method, the variable space is divided into several disjoint subspace by n-dimensional coordinate planes at the mean point of the random vec- tor, and the importance sampling functions in the subspaces are constructed by keeping the sampling center at the mean point and augmenting the standard deviation by a factor of 2. The sample size generated from the importance sampling function in each subspace is determined by the contribution of the subspace to the reliability sensitivity, which can be estimated by iterative simulation in the sampling process. The formulae of the reliability sensitivity estimation, the variance and the coefficient of variation are derived for the presented SISM. Comparing with the Monte Carlo method, the stratified sampling method and the importance sampling method, the presented SISM has wider applicability and higher calculation efficiency, which is demonstrated by numerical examples. Finally, the reliability sensitivity analysis of flap structure is illustrated that the SISM can be applied to engineering structure.
基金the Scientific Research Funds Project of the Science and Technology Department of Sichuan Province(Grant No.21YYJC1616 to Liu Y).
文摘Invasive stratified mucin-producing carcinoma(ISMC)is a recently described histologic variant of high-risk human papillomavirus(HPV)-associated endocervical adenocarcinoma,as the putative invasive counterpart of the stratified mucin-producing intraepithelial lesion(SMILE).ISMC can display variable architectural patterns and usually coexists with other more conventional types of HPV-associated carcinomas,which makes diagnosis and differential diagnosis of ISMC is difficult for pathologists.Moreover,the prognosis of ISMC is still controversial.We analyzed 6 ISMCs with detailed pathological and clinical information.Intraepithelial lesion,including 1 high-grade squamous intraepithelial lesion and 1 SMILE,was found.Various architectures were observed(including nest,glandular,solid,trabecular,and single cell).Nuclear peripheral palisading,apoptotic bodies and mitoses,and variable cytoplasmic mucin vacuoles were seen in all of our cases.The predominance of neutrophils infiltration was seen in only 1 tumor.All the tumors infiltrated the cervical stroma in Silva pattern C manner.p63 and/or p40 was characteristically expressed in the peripheral cells in only 2 cases.High-risk HPV infection was observed in 3/3 detected cases.All the patients were alive during the follow-up time.Recognition of this infrequent tumor may help pathologists and oncologists for an accurate diagnosis and a better understanding of the clinicopathological behavior.
文摘This paper mainly addresses maximum likelihood estimation for a response-selective stratified sampling scheme, the basic stratified sampling (BSS), in which the maximum subsample size in each stratum is fixed. We derived the complete-data likelihood for BSS, and extended it as a full-data likelihood by incorporating incomplete data. We also similarly extended the empirical proportion likelihood approach for consistent and efficient estimation. We conducted a simulation study to compare these two new approaches with the existing estimation methods in BSS. Our result indicates that they perform as well as the standard full information likelihood approach. Methods were illustrated using a growth model for fish size at age, including between-individual variability. One of our major conclusions is that the fully observed BSS data, the partially observed data used for stratification, and the sampling strategy are all important in constructing a consistent and efficient estimator.
文摘The practice of stratified English teaching is determined by the features of vocational education. In addition, it is an inexorable trend of current higher education reform, and also a fundamental demand of higher vocational education and quality-oriented education. This thesis argues for the need of stratified English teaching in high vocational colleges.
基金the National Natural Science Foundation of China(No.51374033)the Key Projects of the National Key Research and Development Program(No.YS2017YFSF040004).
文摘Multiple filling of gobs will lead to a layered structure of the backfill.To explore the influence of layering structure on the mechanical properties and failure modes of backfill,different backfill specimens were prepared with a cement/sand ratio of 1:4,a slurry concentration of 75%,and backfilling times of 1,2,3 and 4,separately.Triaxial cyclic loading and unloading experiments were carried out.The results show that with an increase in backfilling time,the peak strength of backfill decreases as a polynomial function and the peak strain increases as an exponential function.The cyclic load enhances the linear characteristic of backfill deformation.The loading and unloading deformation moduli have a linear negative correlation with the backfilling time.The unloading deformation modulus is always slightly higher than the loading deformation modulus.The failure modes of stratified backfill are mainly characterized by conjugate shear failure at the upper layer and tensile failure across the layer plane,and there is usually no damage in the lower layer away from the loading area.
基金supported by the National Science Foundation of China(grant Nos.49873016,40221301)the Ph.D.Programs Foundation of the Ministry of Education of China(No.20020284035)
文摘An important diplogenetic mineralization event superimposed on pre-existing exhalation sediments in the Tongling area, Anhui province, was triggered by widespread granitic magmatism along the northeastern margin of the Yangtze Block during 140–135 Ma under extensional tectonic circumstances following the collision between the North China and Yangtze blocks. The main orebodies of the Dongguashan copper deposit, a typical diplogenetic stratified deposit among many polymetallic ore deposits in China, are hosted by strata between Upper Devonian sandstone and Carboniferous limestone, and its mineralization was genetically related to the Qingshanjiao intrusive. The Rb-Sr isotopic isochron of the Qingshanjiao intrusive yields an age of about 136.5±1.4 Ma. The ore-forming fluid reflected by the inclusion fluid in quartz veins is characterized by high temperature and high salinity, and its age was also determined by Rb -Sr isotope dating as 134±11 Ma. Oxygen and hydrogen isotope composition data suggest that the ore-forming fluid was derived mainly from magmatism. By integrating these isotopic dating data, characteristics of fluid inclusions and the geology of the deposit, the mineralization of the Dongguashan copper deposit is divided into two stages. First, a stratiform sedimentary deposit or protore layer formed in the Late Devonian to the Early Carboniferous, while in the second stage the pre-existing protore was superimposed by hydrothermal fluid that was derived from the Yanshanian magmatic activities occurring around 135 Ma ago. This two-stage mineralization formed the Dongguashan statiform copper deposit. Associated “porphyry” mineralization found in the bottom of and in surrounding intrusive rocks of the orebodies might have occurred in the same period as a second-stage mineralization of this deposit.
基金supported by the National Natural Science Foundation of China(Grant no.51932011)。
文摘The development of promising zinc anodes mainly suffers from their low plating/stripping coulombic efficiencies when using aqueous electrolyte,which are mainly associated with the interfacial formation of irreversible by-products.It is urgent to develop technologies that can solve this issue fundamentally.Herein,we report an artificial Sc_(2)O_(3) protective film to construct a new class of interface for Zn anode.The density functional theory simulation and experimental results have proven that the interfacial side reaction was inhibited via a stratified adsorption effect between this artificial layer and Zn anode.Benefiting from this novel structure,the Sc_(2)O_(3)-coated Zn anode can run for more than 100 cycles without short circuit and exhibit low voltage hysteresis,and the coulombic efficiency increases by 1.2%.Importantly,it shows a good application prospect when matched with two of popular manganese-based and vanadium-based cathodes.The excellent electrochemical performance of the Sc_(2)O_(3)-coated Zn anode highlights the importance of rational design of anode materials and demonstrates a good way for developing high-performance Zn anodes with long lifespan and high efficiency.
文摘Because of gravitational differentiation of multi-phase fluids, gas-water flow is usually stratified in highly inclined or horizontal gas wells. By using electrode arrays to scan flowing fluids, electromagnetic tomography can identify the flow patterns of mixed fluid from the different electrical properties of gas and water. The responses for different gas-water interface locations were calculated and then physical measurements were undertaken. We compared the results of the numerical simulation with the experimental data, and found that the response characteristics were consistent in the circumstances of uniform physical fields and stratified flows. By analyzing the signal characteristics, it is found that, with the change of the interface location, the response curves showed ＂steps＂ whose position and width were decided by the location of fluid interface. The measurement accuracy of this method depended on the vertical distance between adjacent electrodes. The results showed that computer simulation can simulate the measurement of the electromagnetic tomography accurately, so the physical experiment can be replaced.
基金supported by the 2006 Core Construction Technology Development Project (06KSHS-B01)through ECORIVER21 Research Center in KICTTEP of MOCT
文摘This article aims to describe the influence of diffuse pollution on the temporal and spatial characteristics of natural organic matter （NOM） in a stratified dam reservoir, the Daecheong Dam, on the basis of intensive observation results and the dynamic water quality simulation using CE-QUAL-W2. Turbidity is regarded as a comprehensive representation of allochothonous organic matter from diffuse sources in storm season because the turbidity concentration showed reasonable significance in a statistical correlation with the UV absorbance at 254 nm and total phosphorus. CE-QUAL-W2 simulation results showed good consistency with the observed data in terms of dissolved organic matter （DOM） including refractory dissolved organic carbon （RDOC） and labile DOC and also well explained the internal movement of constituents and stratification phenomenon in the reservoir. Instead turbidity and NOM were related well in the upper region of the reservoir according to flow distance, gradually as changing to dissolved form of organic matter, RDOM affected organic matter concentration of reservoir water quality compared to turbidity. To control the increase of soluble organic matters in the dam reservoir, appropriate dam water discharge gate operation provided effective measurement. Because of the gate operation let avoid the accumulation of organic matter within a dam reservoir by shorten of turbid regime retention time.
基金the financial support of the National Natural Science Foundation of China (Grant No.51579032, 51509173, U1765107)Fundamental Research Funds for the Central Universities (Grant No.DUT16ZD211, DUT17ZD205)
文摘The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in mountainous areas. In this study, an analytical approach based on the energy equilibrium principle is presented to solve the flexural buckling stability of stratified rock slopes within the framework of multilayer beam theory. The generalized HoekBrown failure criterion is introduced to reflect the influences of slope size(scale effects) on the buckling stability. Subsequently, numerical and physical modellings from previous literatures are employed to validate the proposed approach. Furthermore, a practical case of Bawang Mountain landslide is also used for the comparative analysis. The study shows that the present analytical approach is capable to provide a more reasonable assessment for the buckling failure of stratified rock slopes, compared with several existing analytical approaches. Finally, a detailed parametric study is implemented, and the results indicate that the effects of rock strength, rock deformation modulus, geological strength index, layer thickness and disturbance degree of rock mass on the buckling failure of stratified rock slopes are more significant than that of rock type and slope angle.
基金Project (50099620) supported by the National Natural Science Foundation of China
文摘A stratified rock mass model was founded by FLAC^3D. The failure mode and anisotropic characteristic of strength for stratified rock mass were analyzed. The analysis results show that the numerical simulation can visually reflect the failure modes of rock samples under different inclination angles β of structural plane. The stiffness of rock sample before peak strength changes in the compressive procedure. With the increase of β, the compressive strength σc of rock sample decreases firstly and then increases; when β is in the range of 20°-30° and 80°-90°, σc has the largest sensitivity to r; while β falls in the range of 30°-70°, σc varies little. When φj〈β〈90° （ φj is friction angle of structure plane）, the results obtained from numerical simulation and theoretical analysis are in almost the same values; while β〈 φj or β=90°, they are in great different values. The results obtained from theoretical analysis are obvious larger than those from numerical simulation; and the results from numerical simulation can reflect the difference of compressive strength of rock samples for the two situations of β≥φj and β=90°, which is in more accordance with the real situation.
基金AVIC Commercial Aircraft Engine Co.Ltd.’s support on combustion instability investigation
文摘Vortex/flame interaction is an important mechanism for unsteady combustion in a swirl combustion system. Technology of low emission stirred swirl （TeLESS）, which is characterized with stratified swirl flow, has been developed in Beihang University to reduce NOx emission. However, large-scale flow structure would be induced in strong swirl flow. Experiments and computational fluid dynamics （CFD） simulation were carried out to investigate the unsteady flow feature and its mechanism in TeLESS combustor. Hotwire was firstly applied to testing the unsteady flow feature and a distinct mode with 2244 Hz oscillation frequency occurred at the pilot swirl outlet. The flow mode amplitude decayed convectively. Large eddy simulation （LES） was then applied to predicting this flow mode and know about its mechanism. The deviation of mode prediction compared with hotwire test was 0.8%. The spiral isobaric structure in pilot flow passage indicates that precessing vortex core （PVC） existed. The velocity spectrum and phase lag analysis suggest that the periodic movement at the pilot outlet was dominated by precessing movement. Negative tangen- tial momentum gradient reflects that the swirl flow was unstable. Another phenomenon was found out that the PVC movement was intermittently rotated alon~ the symmetric axis.
基金Project supported by the National Natural Science Foundation of China(Nos.91441117 and51576182)the Natural Key Program of Chizhou University(No.2016ZRZ007)
文摘The principal component analysis （PCA） is used to analyze the high dimen- sional chemistry data of laminar premixed/stratified flames under strain effects. The first few principal components （PCs） with larger contribution ratios axe chosen as the tabu- lated scalars to build the look-up chemistry table. Prior tests show that strained premixed flame structure can be well reconstructed. To highlight the physical meanings of the tabu- lated scalars in stratified flames, a modified PCA method is developed, where the mixture fraction is used to replace one of the PCs with the highest correlation coefficient. The other two tabulated scalars are then modified with the Schmidt orthogonalization. The modified tabulated scalars not only have clear physical meanings, but also contain passive scalars. The PCA method has good commonality, and can be extended for building the thermo-chemistry table including strain rate effects when different fuels are used.
