The main objective of this paper is to examine the influence of the applied confining stress on the rock mass modulus of moderately jointed rocks（well interlocked undisturbed rock mass with blocks formed by three or ...The main objective of this paper is to examine the influence of the applied confining stress on the rock mass modulus of moderately jointed rocks（well interlocked undisturbed rock mass with blocks formed by three or less intersecting joints）. A synthetic rock mass modelling（SRM） approach is employed to determine the mechanical properties of the rock mass. In this approach, the intact body of rock is represented by the discrete element method（DEM）-Voronoi grains with the ability of simulating the initiation and propagation of microcracks within the intact part of the model. The geometry of the preexisting joints is generated by employing discrete fracture network（DFN） modelling based on field joint data collected from the Brockville Tunnel using LiDAR scanning. The geometrical characteristics of the simulated joints at a representative sample size are first validated against the field data, and then used to measure the rock quality designation（RQD）, joint spacing, areal fracture intensity（P21）, and block volumes. These geometrical quantities are used to quantitatively determine a representative range of the geological strength index（GSI）. The results show that estimating the GSI using the RQD tends to make a closer estimate of the degree of blockiness that leads to GSI values corresponding to those obtained from direct visual observations of the rock mass conditions in the field. The use of joint spacing and block volume in order to quantify the GSI value range for the studied rock mass suggests a lower range compared to that evaluated in situ. Based on numerical modelling results and laboratory data of rock testing reported in the literature, a semi-empirical equation is proposed that relates the rock mass modulus to confinement as a function of the areal fracture intensity and joint stiffness.展开更多
基金the Nuclear Waste Management Organization (NWMO) of Canadathe National Science and Engineering Research Council (NSERC)+1 种基金the Canadian Ministry of National Defence (DND)the RMC Green Team for funding this research
文摘The main objective of this paper is to examine the influence of the applied confining stress on the rock mass modulus of moderately jointed rocks（well interlocked undisturbed rock mass with blocks formed by three or less intersecting joints）. A synthetic rock mass modelling（SRM） approach is employed to determine the mechanical properties of the rock mass. In this approach, the intact body of rock is represented by the discrete element method（DEM）-Voronoi grains with the ability of simulating the initiation and propagation of microcracks within the intact part of the model. The geometry of the preexisting joints is generated by employing discrete fracture network（DFN） modelling based on field joint data collected from the Brockville Tunnel using LiDAR scanning. The geometrical characteristics of the simulated joints at a representative sample size are first validated against the field data, and then used to measure the rock quality designation（RQD）, joint spacing, areal fracture intensity（P21）, and block volumes. These geometrical quantities are used to quantitatively determine a representative range of the geological strength index（GSI）. The results show that estimating the GSI using the RQD tends to make a closer estimate of the degree of blockiness that leads to GSI values corresponding to those obtained from direct visual observations of the rock mass conditions in the field. The use of joint spacing and block volume in order to quantify the GSI value range for the studied rock mass suggests a lower range compared to that evaluated in situ. Based on numerical modelling results and laboratory data of rock testing reported in the literature, a semi-empirical equation is proposed that relates the rock mass modulus to confinement as a function of the areal fracture intensity and joint stiffness.
