Stable,efficient and high color rendering index all-inorganic color converters are urgently demanded for white laser diodes.Phosphor-in-glass(PiG),possessing the advantages of phosphors excellent quantum efficiency as...Stable,efficient and high color rendering index all-inorganic color converters are urgently demanded for white laser diodes.Phosphor-in-glass(PiG),possessing the advantages of phosphors excellent quantum efficiency as well as favorable chemical and thermal stability of glass,has attracted widespread attention.There have been only very few reports of Y_(1.31)Ce_(0.09)Gd_(1.6)Al_(5)O_(12)(Ce:GdYAG)PiG for solid-state laser light-ing.Herein,a series of Ce:GdYAG PiG samples are fabricated by a simple solid-state sintering method.Impressively,the supreme internal quantum efficiency of as-prepared PiG is 91%,which is very close to original phosphors(95%).Furthermore,PiG exhibits a high thermal conductivity(1.844 W m^(−1)K^(−1))and a maximum transparency(62%).Remarkably,by changing the concentration of phosphors and the thickness of PiG samples,a luminous efficacy of 163.5 lm/W,high color rendering index of 74.8 and low correlated color temperature of 4806.8 K are achieved under blue laser irradiation.These results indicate that the Ce:GdYAG PiG samples have shown tremendous application foreground as all-inorganic color converter for solid-state laser lighting.展开更多
Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerica...Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.展开更多
The intrinsic features involving a circularly symmetric beam profile with low divergence, planar geometry as well as the increasingly enhanced power of vertical-cavity surface-emitting lasers （VCSELs） have made the ...The intrinsic features involving a circularly symmetric beam profile with low divergence, planar geometry as well as the increasingly enhanced power of vertical-cavity surface-emitting lasers （VCSELs） have made the VCSEL a promising pump source in direct end bonding to a solid-state laser medium to form the minimized, on-wafer integrated laser system. This scheme will generate a surface contact pump configuration and thus additional end thermal coupling to the laser medium through the joint interface of both materials, apart from pump beam heating. This paper analytically models temperature distributions in both VCSEL and the laser medium from the end thermal coupling regarding surface contact pump configuration using a top-emitting VCSEL as the pump source for the first time. The analytical solutions are derived by introducing relative temperature and mean temperature expressions. The results show that the end contact heating by the VCSEL could lead to considerable temperature variations associated with thermal phase shift and thermal lensing in the laser medium. However, if the central temperature of the interface is increased by less than 20 K, the end contact heating does not have a significant thermal influence on the laser medium. In this case, the thermal effect should be dominated by pump beam heating. This work provides useful analytical results for further analysis of hybrid thermal effects on those lasers pumped by a direct VCSEL bond.展开更多
A high-power cw all-solid-state Nd：GdVO4 laser operating at 88Onto is reported. The laser consists of a low doped level Nd：GdV04 crystal dual-end-pumped by two high-power diode lasers and a compact negative confocM ...A high-power cw all-solid-state Nd：GdVO4 laser operating at 88Onto is reported. The laser consists of a low doped level Nd：GdV04 crystal dual-end-pumped by two high-power diode lasers and a compact negative confocM unstable-stable hybrid resonator. At an incident pump power of 820 W, a maximum cw output of 240 W at 1064nm is obtained. The optical-to-optical efficiency and Mope efficiency are 40.7% and 53.2%, respectively. The M2 factors in the unstable direction and in the stable direction are 4.38 and 5.44, respectively.展开更多
We realize a stable self-starting passively mode-locking all-solid-state laser by using novel GaAs mirrors as the absorber and output coupler. The GaAs mirror is grown by the technology of metal organic chemical vapou...We realize a stable self-starting passively mode-locking all-solid-state laser by using novel GaAs mirrors as the absorber and output coupler. The GaAs mirror is grown by the technology of metal organic chemical vapour deposition at low temperature. With such an absorber as the output coupler in the laser resonator, laser pulses with duration of 42ps were generated at a repetition rate of 400MHz, corresponding to the average power of 590mW.展开更多
Two models of laser diode pumped unidirectional single-frequency ring laser with maximum single frequency output power of 1 W and 780 mW are investigated.The Statistic linewidth of the free-run laser is measured to be...Two models of laser diode pumped unidirectional single-frequency ring laser with maximum single frequency output power of 1 W and 780 mW are investigated.The Statistic linewidth of the free-run laser is measured to be 2.1 kHz within 5μs by using a single mode fiber link.We use the monolithic laser to measure the angular speed of a spinning motor and simulate a linearly frequency modulated continuous-wave ladar system in laboratory.展开更多
A laser diode end-pumped passively mode-locked Nd：YVO4 solid-state laser with a semiconductor saturable ab- sorber mirror （SESAM）, in which the intracavity laser beam spot on the SESAM can be adjusted periodically,...A laser diode end-pumped passively mode-locked Nd：YVO4 solid-state laser with a semiconductor saturable ab- sorber mirror （SESAM）, in which the intracavity laser beam spot on the SESAM can be adjusted periodically, is investigated. Inserting a rectangular prism （RP） into the laser cavity is a promising approach towards the goal of periodically moving the position of the focus spot of the intracavity pulse on the SESAM surface to avoid the long-time irradiation of the laser beam on the same position, thereby solving a series of problems caused by damage to the SESAM and greatly prolonging its usage life. The adjustment of the rectangular prism in the laser cavity does not break the stable continuous wave （CW） mode-locked condition. The laser generates a stable picosecond pulse sequence at 1064 nm with an output power of 3.6 W and a pulse width of 14 ps. The instabilities of the output power and the pulse width are 1.77% and 4.5%, respectively.展开更多
An LD directly-pumped solid-state laser is considered to be one of the most promising mid-infrared light sources because of its simple principle,small size,and compact structure for the generation of mid-infrared(MIR)...An LD directly-pumped solid-state laser is considered to be one of the most promising mid-infrared light sources because of its simple principle,small size,and compact structure for the generation of mid-infrared(MIR)lasers in the 3-5µm band.However,the quantum defect of LD directly-pumped MIR solid-state lasers will be much larger than that of ordinary near-infrared LD pumped solid-state lasers,which may lead to thermal damage and limit their development.In order to solve this problem,the methods of reducing the specific surface area of the crystal and improving the thermal energy released by the crystal structure are discussed,and the opti⁃mal length of the laser crystal is determined.The cooling structures of barium yttrium fluoride laser crystals(Ho^(3+):BY_(2)F_(8))of different lengths were studied by thermal simulation using COMSOL software.The experimen⁃tal results show that the output power can be increased and the thermal stress in the laser crystal can be alleviated by using the laser crystal whose length is slightly shorter than that of the cooler.The final experiment shows that when the pump repetition rate is 15 Hz and the pulse width is 90µs,the single pulse energy is 7.28 mJ at the out⁃put wavelength of 3.9µm,which is about 3 times as large as that of the crystal with the length of 10 mm(2.81 mJ).Such results should be another breakthrough of our team since the first directly-pumped solid-state MIR laser was realized more than a year ago.It might pave the way for the construction of a feasible MIR laser in the near future.展开更多
A maximum of 310mW average output power at 355nm has been obtained by extracavity frequency tripling with a BBO crystal in a Q-switched Nd:YV04 laser with 11.2 W of laser diode pump power. The single pass frequency co...A maximum of 310mW average output power at 355nm has been obtained by extracavity frequency tripling with a BBO crystal in a Q-switched Nd:YV04 laser with 11.2 W of laser diode pump power. The single pass frequency conversion efficiency (infrared-to-ultraviolet) is 14.3%. The power stability of the ultraviolet laser is better than 1% in 30min.展开更多
In this work, the thermal characterization of continuously pumped passively Q-switched laser is quantitatively represented. The system under investigation is end-pumped Yb:YAG passively Q-switched by Cr4+:YAG as satur...In this work, the thermal characterization of continuously pumped passively Q-switched laser is quantitatively represented. The system under investigation is end-pumped Yb:YAG passively Q-switched by Cr4+:YAG as saturable absorber. The rate equations describing the dynamics of laser action are numerically solved simultaneously with the temperature conductivity heat equation to depict the transient temperature distribution. The study has been performed in the cylindrical coordinates to characterize the temperature distribution in the axial and radial directions. The thermal transient time in both directions as well as the thermal focal length are calculated. The temporal behavior of the temperature distribution has been illustrated in a 3-dimensional diagram.展开更多
Micro silicon(mSi)is a promising anode candidate for all-solid-state batteries due to its high specific capacity,low side reactions,and high tap density.However,silicon suffers from its poor electronic and ionic condu...Micro silicon(mSi)is a promising anode candidate for all-solid-state batteries due to its high specific capacity,low side reactions,and high tap density.However,silicon suffers from its poor electronic and ionic conductivity,which is particularly severe on a micro scale and in solid-state systems,leading to increased polarization and inferior electrochemical performance.Doping can broaden the transmission pathways and reduce the diffusion energy barrier for electrons and lithium ions.However,achieving effective,uniform doping in mSi is challenging due to its longer diffusion paths and higher energy barriers.Therefore,current doping research is primarily limited to nanosilicon.In this study,we successfully used a Joule-heating activated staged thermal treatment to achieve full-depth doping of germanium(Ge)in the mSi substrate.The Joule-heating process activated the mSi substrate,resulting in abundant vacancy defects that reduced the diffusion barrier of Ge into the silicon lattice and facilitated full-depth Ge doping.Surprisingly,the resulting Si-Ge anode exhibited significantly enhanced electrical conductivity(70 times).Meanwhile,the improved Li-ion conductivity in mSi and the reduced Young’s modulus enhance the electrode reaction kinetics and integrity after cycling.Ge-doped silicon anodes demonstrate excellent electrochemical performance when applied in sulfide solid-state half-cells and full-cells.This work provides substantial insights into the rational structural design of mSi alloyed anode materials,paving the way for the development of high-performance solid-state Li-ion batteries.展开更多
Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)have long faced limitations due to low ionic conductivity at ambient temperature and poor interfacial stability with lithium metal anodes.Here,we present a...Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)have long faced limitations due to low ionic conductivity at ambient temperature and poor interfacial stability with lithium metal anodes.Here,we present a structural engineering strategy to address these challenges through shear-induced crystallization of concentrated PEO-LiTFSI solutions,which self-assemble into flower-like spherulites with radially aligned lamellar crystals.This unique structure creates continuous Li^(+)transport highways through densely packed crystalline domains,achieving a record-high ionic conductivity of 1.70×10^(-4) S/cm at 25℃ for pristine PEO-based systems.Strategic incorporation of lithium montmorillonite(MMTli,10 wt%)further optimizes the composite electrolyte,balancing high ionic conductivity(1.47×10^(-4) S/cm)with enhanced electrochemical stability(4.99 V vs.Li^(+)/Li),elevated Li^(+)transference number(0.62),and mechanical robustness.The composite electrolyte enables stable Li plating/stripping over 800 h in symmetric Li||Li cells and powers LiFePO_(4)||Li solid-state batteries with 82%capacity retention after 200 cycles at 0.2 C under ambient conditions.This work pioneers a scalable processing paradigm for crystalline polymer electrolytes,offering new insights into ion transport mechanisms and validating clay minerals as multifunctional additives for next-generation energy storage systems.展开更多
All-solid-state batteries(ASSBs)represent a next-generation energy storage technology,offering enhanced safety,higher energy density,and improved cycling stability compared to conventional liquid-electrolyte-based lit...All-solid-state batteries(ASSBs)represent a next-generation energy storage technology,offering enhanced safety,higher energy density,and improved cycling stability compared to conventional liquid-electrolyte-based lithium-ion batteries.Understanding and optimizing the complex chemistries and interfaces that underpin ASSB performance present significant challenges from both experimental and modeling perspectives.In particular,atomistic simulations face difficulties in capturing the complex structure,disorder,and dynamic evolution of materials and interfaces under practically relevant conditions.While established methods such as density functional theory and classical force fields have provided valuable insights,some questions remain difficult to address,particularly those involving large system sizes or long timescales.Recently,machine learning interatomic potentials(MLIPs)have emerged as a transformative tool,enabling atomistic simulations at length and time scales that were previously challenging to access with conventional approaches.By delivering near first-principles accuracy with much greater efficiency,MLIPs open new avenues for large-scale,long-timescale,and high-throughput simulations of solid-state battery materials.In this review,we present a comparative overview of density functional theory,classical force fields,and MLIPs,highlighting their respective strengths and limitations in ASSB research.We then discuss how MLIPs enable simulations that reach longer timescales,larger system sizes,and support high-throughput calculations,providing unique insights into ion transport and interfacial evolution in ASSBs.Finally,we conclude with a summary and outlook on current challenges and future opportunities for expanding MLIP capabilities and accelerating their impact in solid-state battery research.展开更多
In the realm of large-scale power system energy storage,sodium-based batteries represent a cost-effective post-lithium energy storage technology,making inorganic solid-state sodium batteries(ISSSB)a critical branch of...In the realm of large-scale power system energy storage,sodium-based batteries represent a cost-effective post-lithium energy storage technology,making inorganic solid-state sodium batteries(ISSSB)a critical branch of this development.Inorganic solid-state electrolytes(ISSEs)are the core components of sodium batteries;however,they face significant challenges such as insufficient ionic conductivity,interfacial instability,and dendrite growth,all of which severely hinder practical application.This review critically assesses experimental protocols and theoretical frameworks related to mainstream ISSEs and systematizes optimization strategies aimed at overcoming these challenges.Leveraging integrated insights from both experimental and computational studies,the review first categorizes and summarizes the primary types of ISSEs,namely oxide-,sulfide-,and halide-based electrolytes.It then details interfacial optimization strategies focused on addressing three core interfacial issues:ion transport barriers resulting from mechanical incompatibility,side reactions stemming from electrochemical mismatch,and dendrite formation.Finally,the review advocates prioritizing in-depth research that integrates experimental and theoretical approaches to establish a closed-loop methodology encompassing predictive design,multiscale investigation,mechanistic exploration,and high-throughput automated experimentation,with feedback-driven refinement.This work serves as a comprehensive reference and systematic roadmap for future research on solid-state electrolytes(SSEs).展开更多
Thermoplastic polyurethane(TPU)consists of a hardsegment and a soft segment,where the former affords mechanical strength and thermalstability,while the latter provides a possibility of good ionic conductivity by promo...Thermoplastic polyurethane(TPU)consists of a hardsegment and a soft segment,where the former affords mechanical strength and thermalstability,while the latter provides a possibility of good ionic conductivity by promoting dissociation of ions from the lithium salt.Thus,TPU attracts a wide interest recently as a promising polymer electrolyte for solid-state lithium batteries.However,the relatively low ionic conductivity of TPU still restricts its actual applications due to the aggregation of polymer chains,which greatly reduces the dissociation of lithium salts.Herein,a strategy to address this challenge was adopted by in situ polymerization poly(ethylene glycol diacrylate)(PEGDA)in fully dispersed TPU.Hence a stretchable solid-state electrolyte(denoted as TELL and the contrast sample was denoted as TLL)with high ionic conductivity of 7.18×10^(-4) S/cm was obtained at room temperature.The Li^(+)transference number is 0.85 in Li|TELL|Li cell and can stably undergo charge-discharge cycles for 1400 h at a current density of O.1 mA/cm^(2),while the contrast sample is short-circuited after 634 h of cycling.The LiFePO_(4)|TELL|Li cell achieves a capacity retention of 78.93%after 200 cycles at 2 C.The LiFePO_(4) TLL Li cellonly gains the capacity retention of 51.9%after 50 cyclesat the same current density.So,the method adopted here may provide a new approach to realize a flexible solid-state electrolyte with high ion-conductivity.展开更多
All-solid-state batteries(ASSBs)with Li or Si anodes promise enhanced safety and high energy densities but face challenges with complex fabrication,stringent storage requirements,and pressure-dependent operation.Polye...All-solid-state batteries(ASSBs)with Li or Si anodes promise enhanced safety and high energy densities but face challenges with complex fabrication,stringent storage requirements,and pressure-dependent operation.Polyethylene oxide(PEO)-based composite solid electrolytes(CSEs)enable easy processing and flexible interfaces,supporting pressure-free operation and reducing costs.However,their low ionic conductivity remains a key limitation.Here,we present a rapid(~5 min)and eco-friendly laser modification strategy for post-synthesized PEO CSEs,achieving enhanced ionic conductivity while retaining the attributes of simple fabrication and compatibility with Li and Si anodes under pressure-free operation.Laser engineering reduces PEO crystallinity,introduces additional Li^(+)coordination sites,and improves interfacial stability through tailored solid electrolyte interphases.The laser-modified electrolyte enables LiFePO_(4)//Li cells to retain 142.4 mAh g^(-1)after 800 cycles with 99.8%Coulombic efficiency at 1 C and 60℃.Moreover,without stack pressure,a Si anode paired with the laser-modified electrolyte delivers a high capacity of 1710.3 mAh g^(-1)with 56%retention at 0.5 A g^(-1)after 50 cycles at 60℃.Beyond performance enhancements,this work establishes a link between fluorescence emission and Li^(+)transport in CSEs.Specifically,fluorescence shifts to shorter wavelengths correspond to shorter molecular chain lengths and lower coordination bonds,supported by time-dependent density functional theory calculations.These factors give rise to improved Li^(+)transport.This optical probe offers a non-destructive approach for rapidly assessing electrolyte properties and enriching electrolyte design.Overall,this work demonstrates laser engineering as a practical post-synthetic strategy and highlights fluorescence as a practical indicator for advancing next-generation ASSBs.展开更多
We report on the successful demonstration of a 150 J nanosecond pulsed cryogenic gas cooled,diode-pumped multi-slab Yb:YAG laser operating at 1 Hz.To the best of our knowledge,this is the highest energy ever recorded ...We report on the successful demonstration of a 150 J nanosecond pulsed cryogenic gas cooled,diode-pumped multi-slab Yb:YAG laser operating at 1 Hz.To the best of our knowledge,this is the highest energy ever recorded for a diodepumped laser system.展开更多
Two-dimensional(2 D) Te nanosheets were successfully fabricated through the liquid-phase exfoliation(LPE) method. The nonlinear optical properties of 2 D Te nanosheets were studied by the open-aperture Z-scan techniqu...Two-dimensional(2 D) Te nanosheets were successfully fabricated through the liquid-phase exfoliation(LPE) method. The nonlinear optical properties of 2 D Te nanosheets were studied by the open-aperture Z-scan technique. Furthermore, the continuous wave mode-locked Nd:YVO4 laser was successfully realized by using 2 D Te as a saturable absorber(SA) for the first time, to the best of our knowledge. Ultrashort pulses as short as 5.8 ps were obtained at 1064.3 nm with an output power of 851 m W. This primary investigation indicates that the 2 D Te SA is a promising photonic device in the fields of ultrafast solid-state lasers.展开更多
In this paper,we reported a multiwavelength passively Q-switched Yb3+:GdAl3（BO3）4 solid-state laser with topological insulator Bi2Te3 as a saturable absorber（SA） for the first time,to the best of our knowledge.Bi2...In this paper,we reported a multiwavelength passively Q-switched Yb3+:GdAl3（BO3）4 solid-state laser with topological insulator Bi2Te3 as a saturable absorber（SA） for the first time,to the best of our knowledge.Bi2Te3 nanosheets were prepared by the facile solvothermal method.The influence of three Bi2Te3 densities on the laser operation was compared.The maximum average output power was up to 57 mW with a pulse energy of 511.7 nJ.The shortest pulsewidth was measured to be 370 ns with 110 kHz pulse repetition rate and 40 mW average power.The laser operated at three wavelengths simultaneously at 1043.7,1045.3,and 1046.2 nm,of which the frequency differences were within the terahertz wave band.Our work suggests that solvothermal synthesized Bi2Te3 is a promising SA for simultaneously multiwavelength laser operation.展开更多
基金supported by the Key Research and Development Project in Zhejiang Province(No.2021C01024).
文摘Stable,efficient and high color rendering index all-inorganic color converters are urgently demanded for white laser diodes.Phosphor-in-glass(PiG),possessing the advantages of phosphors excellent quantum efficiency as well as favorable chemical and thermal stability of glass,has attracted widespread attention.There have been only very few reports of Y_(1.31)Ce_(0.09)Gd_(1.6)Al_(5)O_(12)(Ce:GdYAG)PiG for solid-state laser light-ing.Herein,a series of Ce:GdYAG PiG samples are fabricated by a simple solid-state sintering method.Impressively,the supreme internal quantum efficiency of as-prepared PiG is 91%,which is very close to original phosphors(95%).Furthermore,PiG exhibits a high thermal conductivity(1.844 W m^(−1)K^(−1))and a maximum transparency(62%).Remarkably,by changing the concentration of phosphors and the thickness of PiG samples,a luminous efficacy of 163.5 lm/W,high color rendering index of 74.8 and low correlated color temperature of 4806.8 K are achieved under blue laser irradiation.These results indicate that the Ce:GdYAG PiG samples have shown tremendous application foreground as all-inorganic color converter for solid-state laser lighting.
文摘Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.
文摘The intrinsic features involving a circularly symmetric beam profile with low divergence, planar geometry as well as the increasingly enhanced power of vertical-cavity surface-emitting lasers （VCSELs） have made the VCSEL a promising pump source in direct end bonding to a solid-state laser medium to form the minimized, on-wafer integrated laser system. This scheme will generate a surface contact pump configuration and thus additional end thermal coupling to the laser medium through the joint interface of both materials, apart from pump beam heating. This paper analytically models temperature distributions in both VCSEL and the laser medium from the end thermal coupling regarding surface contact pump configuration using a top-emitting VCSEL as the pump source for the first time. The analytical solutions are derived by introducing relative temperature and mean temperature expressions. The results show that the end contact heating by the VCSEL could lead to considerable temperature variations associated with thermal phase shift and thermal lensing in the laser medium. However, if the central temperature of the interface is increased by less than 20 K, the end contact heating does not have a significant thermal influence on the laser medium. In this case, the thermal effect should be dominated by pump beam heating. This work provides useful analytical results for further analysis of hybrid thermal effects on those lasers pumped by a direct VCSEL bond.
文摘A high-power cw all-solid-state Nd：GdVO4 laser operating at 88Onto is reported. The laser consists of a low doped level Nd：GdV04 crystal dual-end-pumped by two high-power diode lasers and a compact negative confocM unstable-stable hybrid resonator. At an incident pump power of 820 W, a maximum cw output of 240 W at 1064nm is obtained. The optical-to-optical efficiency and Mope efficiency are 40.7% and 53.2%, respectively. The M2 factors in the unstable direction and in the stable direction are 4.38 and 5.44, respectively.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60225005 and 10227401, the Knowledge Innovation Programme of Chinese Academy of Sciences, and the National Hi-Tech ICF Committee of China.
文摘We realize a stable self-starting passively mode-locking all-solid-state laser by using novel GaAs mirrors as the absorber and output coupler. The GaAs mirror is grown by the technology of metal organic chemical vapour deposition at low temperature. With such an absorber as the output coupler in the laser resonator, laser pulses with duration of 42ps were generated at a repetition rate of 400MHz, corresponding to the average power of 590mW.
文摘Two models of laser diode pumped unidirectional single-frequency ring laser with maximum single frequency output power of 1 W and 780 mW are investigated.The Statistic linewidth of the free-run laser is measured to be 2.1 kHz within 5μs by using a single mode fiber link.We use the monolithic laser to measure the angular speed of a spinning motor and simulate a linearly frequency modulated continuous-wave ladar system in laboratory.
基金Project supported by the State Key Laboratory of Tribology,Tsinghua University,China (Grant No.SKLT08A05)
文摘A laser diode end-pumped passively mode-locked Nd：YVO4 solid-state laser with a semiconductor saturable ab- sorber mirror （SESAM）, in which the intracavity laser beam spot on the SESAM can be adjusted periodically, is investigated. Inserting a rectangular prism （RP） into the laser cavity is a promising approach towards the goal of periodically moving the position of the focus spot of the intracavity pulse on the SESAM surface to avoid the long-time irradiation of the laser beam on the same position, thereby solving a series of problems caused by damage to the SESAM and greatly prolonging its usage life. The adjustment of the rectangular prism in the laser cavity does not break the stable continuous wave （CW） mode-locked condition. The laser generates a stable picosecond pulse sequence at 1064 nm with an output power of 3.6 W and a pulse width of 14 ps. The instabilities of the output power and the pulse width are 1.77% and 4.5%, respectively.
基金Supported by the National Key Research and Development Program of China(2021YFA0718803)。
文摘An LD directly-pumped solid-state laser is considered to be one of the most promising mid-infrared light sources because of its simple principle,small size,and compact structure for the generation of mid-infrared(MIR)lasers in the 3-5µm band.However,the quantum defect of LD directly-pumped MIR solid-state lasers will be much larger than that of ordinary near-infrared LD pumped solid-state lasers,which may lead to thermal damage and limit their development.In order to solve this problem,the methods of reducing the specific surface area of the crystal and improving the thermal energy released by the crystal structure are discussed,and the opti⁃mal length of the laser crystal is determined.The cooling structures of barium yttrium fluoride laser crystals(Ho^(3+):BY_(2)F_(8))of different lengths were studied by thermal simulation using COMSOL software.The experimen⁃tal results show that the output power can be increased and the thermal stress in the laser crystal can be alleviated by using the laser crystal whose length is slightly shorter than that of the cooler.The final experiment shows that when the pump repetition rate is 15 Hz and the pulse width is 90µs,the single pulse energy is 7.28 mJ at the out⁃put wavelength of 3.9µm,which is about 3 times as large as that of the crystal with the length of 10 mm(2.81 mJ).Such results should be another breakthrough of our team since the first directly-pumped solid-state MIR laser was realized more than a year ago.It might pave the way for the construction of a feasible MIR laser in the near future.
基金Supported by the National Natural Science Foundation of China under Grant No.60078011in part by an Open Project of the National Laboratory of Solid State Microstructure,Nanjing University.
文摘A maximum of 310mW average output power at 355nm has been obtained by extracavity frequency tripling with a BBO crystal in a Q-switched Nd:YV04 laser with 11.2 W of laser diode pump power. The single pass frequency conversion efficiency (infrared-to-ultraviolet) is 14.3%. The power stability of the ultraviolet laser is better than 1% in 30min.
文摘In this work, the thermal characterization of continuously pumped passively Q-switched laser is quantitatively represented. The system under investigation is end-pumped Yb:YAG passively Q-switched by Cr4+:YAG as saturable absorber. The rate equations describing the dynamics of laser action are numerically solved simultaneously with the temperature conductivity heat equation to depict the transient temperature distribution. The study has been performed in the cylindrical coordinates to characterize the temperature distribution in the axial and radial directions. The thermal transient time in both directions as well as the thermal focal length are calculated. The temporal behavior of the temperature distribution has been illustrated in a 3-dimensional diagram.
基金financially supported by the National Key Research and Development Program(2022YFE0127400)the National Natural Science Foundation of China(52172040,52202041,and U23B2077)+1 种基金Taishan Scholar Project of Shandong Province(tsqn202211086,ts202208832,tsqnz20221118)the Fundamental Research Funds for the Central Universities(23CX06055A).
文摘Micro silicon(mSi)is a promising anode candidate for all-solid-state batteries due to its high specific capacity,low side reactions,and high tap density.However,silicon suffers from its poor electronic and ionic conductivity,which is particularly severe on a micro scale and in solid-state systems,leading to increased polarization and inferior electrochemical performance.Doping can broaden the transmission pathways and reduce the diffusion energy barrier for electrons and lithium ions.However,achieving effective,uniform doping in mSi is challenging due to its longer diffusion paths and higher energy barriers.Therefore,current doping research is primarily limited to nanosilicon.In this study,we successfully used a Joule-heating activated staged thermal treatment to achieve full-depth doping of germanium(Ge)in the mSi substrate.The Joule-heating process activated the mSi substrate,resulting in abundant vacancy defects that reduced the diffusion barrier of Ge into the silicon lattice and facilitated full-depth Ge doping.Surprisingly,the resulting Si-Ge anode exhibited significantly enhanced electrical conductivity(70 times).Meanwhile,the improved Li-ion conductivity in mSi and the reduced Young’s modulus enhance the electrode reaction kinetics and integrity after cycling.Ge-doped silicon anodes demonstrate excellent electrochemical performance when applied in sulfide solid-state half-cells and full-cells.This work provides substantial insights into the rational structural design of mSi alloyed anode materials,paving the way for the development of high-performance solid-state Li-ion batteries.
基金supported by the National Natural Science Foundation of China(No.42272044)the High-performance Computing Platform of China University of Geosciences Beijing。
文摘Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)have long faced limitations due to low ionic conductivity at ambient temperature and poor interfacial stability with lithium metal anodes.Here,we present a structural engineering strategy to address these challenges through shear-induced crystallization of concentrated PEO-LiTFSI solutions,which self-assemble into flower-like spherulites with radially aligned lamellar crystals.This unique structure creates continuous Li^(+)transport highways through densely packed crystalline domains,achieving a record-high ionic conductivity of 1.70×10^(-4) S/cm at 25℃ for pristine PEO-based systems.Strategic incorporation of lithium montmorillonite(MMTli,10 wt%)further optimizes the composite electrolyte,balancing high ionic conductivity(1.47×10^(-4) S/cm)with enhanced electrochemical stability(4.99 V vs.Li^(+)/Li),elevated Li^(+)transference number(0.62),and mechanical robustness.The composite electrolyte enables stable Li plating/stripping over 800 h in symmetric Li||Li cells and powers LiFePO_(4)||Li solid-state batteries with 82%capacity retention after 200 cycles at 0.2 C under ambient conditions.This work pioneers a scalable processing paradigm for crystalline polymer electrolytes,offering new insights into ion transport mechanisms and validating clay minerals as multifunctional additives for next-generation energy storage systems.
文摘All-solid-state batteries(ASSBs)represent a next-generation energy storage technology,offering enhanced safety,higher energy density,and improved cycling stability compared to conventional liquid-electrolyte-based lithium-ion batteries.Understanding and optimizing the complex chemistries and interfaces that underpin ASSB performance present significant challenges from both experimental and modeling perspectives.In particular,atomistic simulations face difficulties in capturing the complex structure,disorder,and dynamic evolution of materials and interfaces under practically relevant conditions.While established methods such as density functional theory and classical force fields have provided valuable insights,some questions remain difficult to address,particularly those involving large system sizes or long timescales.Recently,machine learning interatomic potentials(MLIPs)have emerged as a transformative tool,enabling atomistic simulations at length and time scales that were previously challenging to access with conventional approaches.By delivering near first-principles accuracy with much greater efficiency,MLIPs open new avenues for large-scale,long-timescale,and high-throughput simulations of solid-state battery materials.In this review,we present a comparative overview of density functional theory,classical force fields,and MLIPs,highlighting their respective strengths and limitations in ASSB research.We then discuss how MLIPs enable simulations that reach longer timescales,larger system sizes,and support high-throughput calculations,providing unique insights into ion transport and interfacial evolution in ASSBs.Finally,we conclude with a summary and outlook on current challenges and future opportunities for expanding MLIP capabilities and accelerating their impact in solid-state battery research.
基金the National Natural Science Foundation of China (52076076, 52006065)Fundamental Research Funds for Central Universities (2025JC003)Beijing Municipal Natural Science Foundation (3242022)
文摘In the realm of large-scale power system energy storage,sodium-based batteries represent a cost-effective post-lithium energy storage technology,making inorganic solid-state sodium batteries(ISSSB)a critical branch of this development.Inorganic solid-state electrolytes(ISSEs)are the core components of sodium batteries;however,they face significant challenges such as insufficient ionic conductivity,interfacial instability,and dendrite growth,all of which severely hinder practical application.This review critically assesses experimental protocols and theoretical frameworks related to mainstream ISSEs and systematizes optimization strategies aimed at overcoming these challenges.Leveraging integrated insights from both experimental and computational studies,the review first categorizes and summarizes the primary types of ISSEs,namely oxide-,sulfide-,and halide-based electrolytes.It then details interfacial optimization strategies focused on addressing three core interfacial issues:ion transport barriers resulting from mechanical incompatibility,side reactions stemming from electrochemical mismatch,and dendrite formation.Finally,the review advocates prioritizing in-depth research that integrates experimental and theoretical approaches to establish a closed-loop methodology encompassing predictive design,multiscale investigation,mechanistic exploration,and high-throughput automated experimentation,with feedback-driven refinement.This work serves as a comprehensive reference and systematic roadmap for future research on solid-state electrolytes(SSEs).
基金financially supported by the National Natural Science Foundation of China(Nos.52263010 and 52372188)2023 Introduction of studying abroad talent program,Henan Provincial Key Scientific Research Project of Collegesand Universities(No.23A150038)+1 种基金Key Scientific Research Project of Education Department of Henan Province(No.22A150042)the National students'platform for innovation and entrepreneurship training program(No.201910476010).
文摘Thermoplastic polyurethane(TPU)consists of a hardsegment and a soft segment,where the former affords mechanical strength and thermalstability,while the latter provides a possibility of good ionic conductivity by promoting dissociation of ions from the lithium salt.Thus,TPU attracts a wide interest recently as a promising polymer electrolyte for solid-state lithium batteries.However,the relatively low ionic conductivity of TPU still restricts its actual applications due to the aggregation of polymer chains,which greatly reduces the dissociation of lithium salts.Herein,a strategy to address this challenge was adopted by in situ polymerization poly(ethylene glycol diacrylate)(PEGDA)in fully dispersed TPU.Hence a stretchable solid-state electrolyte(denoted as TELL and the contrast sample was denoted as TLL)with high ionic conductivity of 7.18×10^(-4) S/cm was obtained at room temperature.The Li^(+)transference number is 0.85 in Li|TELL|Li cell and can stably undergo charge-discharge cycles for 1400 h at a current density of O.1 mA/cm^(2),while the contrast sample is short-circuited after 634 h of cycling.The LiFePO_(4)|TELL|Li cell achieves a capacity retention of 78.93%after 200 cycles at 2 C.The LiFePO_(4) TLL Li cellonly gains the capacity retention of 51.9%after 50 cyclesat the same current density.So,the method adopted here may provide a new approach to realize a flexible solid-state electrolyte with high ion-conductivity.
基金the generous support from the Singapore MOE-ARC grant(A-8001494-00-00)supported by the Ministry of Education,Singapore,under its Research Centre of Excellence award to the Institute for Functional Intelligent Materials(EDUNC-33-18-279-V12)。
文摘All-solid-state batteries(ASSBs)with Li or Si anodes promise enhanced safety and high energy densities but face challenges with complex fabrication,stringent storage requirements,and pressure-dependent operation.Polyethylene oxide(PEO)-based composite solid electrolytes(CSEs)enable easy processing and flexible interfaces,supporting pressure-free operation and reducing costs.However,their low ionic conductivity remains a key limitation.Here,we present a rapid(~5 min)and eco-friendly laser modification strategy for post-synthesized PEO CSEs,achieving enhanced ionic conductivity while retaining the attributes of simple fabrication and compatibility with Li and Si anodes under pressure-free operation.Laser engineering reduces PEO crystallinity,introduces additional Li^(+)coordination sites,and improves interfacial stability through tailored solid electrolyte interphases.The laser-modified electrolyte enables LiFePO_(4)//Li cells to retain 142.4 mAh g^(-1)after 800 cycles with 99.8%Coulombic efficiency at 1 C and 60℃.Moreover,without stack pressure,a Si anode paired with the laser-modified electrolyte delivers a high capacity of 1710.3 mAh g^(-1)with 56%retention at 0.5 A g^(-1)after 50 cycles at 60℃.Beyond performance enhancements,this work establishes a link between fluorescence emission and Li^(+)transport in CSEs.Specifically,fluorescence shifts to shorter wavelengths correspond to shorter molecular chain lengths and lower coordination bonds,supported by time-dependent density functional theory calculations.These factors give rise to improved Li^(+)transport.This optical probe offers a non-destructive approach for rapidly assessing electrolyte properties and enriching electrolyte design.Overall,this work demonstrates laser engineering as a practical post-synthetic strategy and highlights fluorescence as a practical indicator for advancing next-generation ASSBs.
文摘We report on the successful demonstration of a 150 J nanosecond pulsed cryogenic gas cooled,diode-pumped multi-slab Yb:YAG laser operating at 1 Hz.To the best of our knowledge,this is the highest energy ever recorded for a diodepumped laser system.
基金supported by the National Natural Science Foundation of China (Nos. 12004208, 51302285, 61675217, and 61975221)Natural Science Foundation of Shanghai (No. 19ZR1479300)+3 种基金Key Research Program of Frontier Science of CAS (No. QYZDB-SSW-JSC041)Program of Shanghai Academic Research Leader (No. 17XD1403900)Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB16030700)Key Laboratory of Optoelectronic Information Technology, Ministry of Education (Tianjin University)。
文摘Two-dimensional(2 D) Te nanosheets were successfully fabricated through the liquid-phase exfoliation(LPE) method. The nonlinear optical properties of 2 D Te nanosheets were studied by the open-aperture Z-scan technique. Furthermore, the continuous wave mode-locked Nd:YVO4 laser was successfully realized by using 2 D Te as a saturable absorber(SA) for the first time, to the best of our knowledge. Ultrashort pulses as short as 5.8 ps were obtained at 1064.3 nm with an output power of 851 m W. This primary investigation indicates that the 2 D Te SA is a promising photonic device in the fields of ultrafast solid-state lasers.
基金supported by the National Natural Science Foundation of China (50902129,51472240,61078076,91122033,and 11304313)the Knowledge Innovation Program of Chinese Academy of Sciences (KJCX2-EW-H03)the Key Laboratory of Functional Crystal Materials and Device (Shandong University,Ministry of Education)
文摘In this paper,we reported a multiwavelength passively Q-switched Yb3+:GdAl3（BO3）4 solid-state laser with topological insulator Bi2Te3 as a saturable absorber（SA） for the first time,to the best of our knowledge.Bi2Te3 nanosheets were prepared by the facile solvothermal method.The influence of three Bi2Te3 densities on the laser operation was compared.The maximum average output power was up to 57 mW with a pulse energy of 511.7 nJ.The shortest pulsewidth was measured to be 370 ns with 110 kHz pulse repetition rate and 40 mW average power.The laser operated at three wavelengths simultaneously at 1043.7,1045.3,and 1046.2 nm,of which the frequency differences were within the terahertz wave band.Our work suggests that solvothermal synthesized Bi2Te3 is a promising SA for simultaneously multiwavelength laser operation.
