Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticl...Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticles were characterized using a variety of techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), and Vibrating Sample Magnetometer (VSM). These characterizations confirmed the successful formation of Fe3O4 nanoparticles. The FTIR spectra identified characteristic peaks corresponding to the functional groups present, and XRD analysis, using Scherer’s equation, determined an average crystalline size of 1.2 nm for the Fe3O4 nanoparticles. TGA results demonstrated the thermal stability of the nanoparticles, SEM imaging revealed distinct honeycomb-like structures for the nanoparticles synthesized with water as the solvent, while the VSM analysis was used to determine the magnetic behavior of the nanoparticles.展开更多
In this research study,magnesium-aluminum(Mg-Al)bimetallic oxide powders are synthesized via the sol-gel auto combustion method using diethanolamine(DEA)as the fuel.In order to subsequently determine the influence of ...In this research study,magnesium-aluminum(Mg-Al)bimetallic oxide powders are synthesized via the sol-gel auto combustion method using diethanolamine(DEA)as the fuel.In order to subsequently determine the influence of calcination temperatures upon the structure,chemical bonding,morphology,optical properties,and fluorescence properties of the as-synthesized and calcined Mg-Al bimetallic oxide powders,the researcher employed X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),transmission electron microscopy(TEM),UV–visible diffuse reflectance spectroscopy(UV-DRS),and photoluminescence spectroscopy(PL),respectively.It was apparent on the basis of the XRD and FT-IR analyses that those powders undergoing calcination at temperatures of 500℃,700℃,and 900℃contained the major phase magnesium aluminate(Mg Al_(2)O_(4))spinel with trace magnesium oxide(Mg O)and hydrotalcite(Mg_(6)Al_(2)(CO_(3))(OH)_(16)).When the calcination temperature rose to 1100℃,this resulted in a single phase MgAl_(2)O_(4)while MgO and(Mg_(6)Al_(2)(CO_(3))(OH)_(16))were no longer observed.UV-DRS analysis revealed that in optimized conditions,calcination resulted in better sample absorption and reflection levels when compared to the ultraviolet,visible,and infrared spectra observed in the case of the as-synthesized sample.The bandgap energy(E_(g))for calcined samples was in the range of 2.65 e V to 5.85 e V,in contrast to the value of 4.10 e V for the as-synthesized sample.Analysis of photoluminescence showed that for the as-synthesized samples and those calcined at low temperatures,visible light was emitted only in the violet,blue,and green regions with low intensity,while for samples calcined at higher temperatures,the emissions showed greater intensity and extended to the yellow and orange regions.Multiple defect centers were found in the bandgap which can explain these findings.展开更多
In this research work,sol-gel technique was employed to prepare the strontium based spinel ferrite nanoparticles(SrFe_(2)O_(4))with different ratios of terbium(Tb).Different characterization techniques were used to in...In this research work,sol-gel technique was employed to prepare the strontium based spinel ferrite nanoparticles(SrFe_(2)O_(4))with different ratios of terbium(Tb).Different characterization techniques were used to investigate the structural,morphological,dielectric and magnetic properties of the prepared samples.X-ray diffraction(XRD)result suggests that face-centered cube spinel nanocrystalline structure is formed.Crystallite size of the SrFe_(2)O_(4)decreases with rising of Tb ratio.The morphology,shape and size of the SrFe_(2)O_(4)were examined by scanning electron microscopy(SEM)analysis and results reveal inhomogeneous distributions of the nanostructures with high agglomeration.The electrical resistivity of the SrFe_(2)O_(4)increases with rising of Tb ratio,which is confirmed from the cyclic voltammetry.It is observed that dielectric constant of all the samples decreases with the increasing frequency range.It is determined that the dielectric constants of the spinel ferrites are frequency dependent and decrease with increasing the frequency of applied electric field.The magnetic behavior of SrFe_(2)O_(4)with different ratios of Tb was studied and it is found that the saturation magnetization values of samples decrease with increase in the substitution of Tb^(3+)at octahedral sites for Fe^(3+).This decrease in the values of M_(s) is also attributed to spin at surface of nanoparticles.展开更多
Ba1-xSrxTiO3（BST）powders were fabricated by sol-gel process by using strontium carbonate for the substitution of strontium acetate.Barium acetate,strontium carbonate and titanium-tetrabutoxide were used as raw mater...Ba1-xSrxTiO3（BST）powders were fabricated by sol-gel process by using strontium carbonate for the substitution of strontium acetate.Barium acetate,strontium carbonate and titanium-tetrabutoxide were used as raw materials.The BST gel was studied by thermal analysis techniques,the physical structure of the BST powders was measured by XRD and the grain size was measured.The results showed that the powders possess a single perovskite phase after 700℃ and the ideal powder size even after 800℃ calcining.This indicated that the powder can be used for BST ceramics and the fabrication of the sol-gel derived BST can be carried out well by using carbonate as the starting materials.展开更多
文摘Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticles were characterized using a variety of techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), and Vibrating Sample Magnetometer (VSM). These characterizations confirmed the successful formation of Fe3O4 nanoparticles. The FTIR spectra identified characteristic peaks corresponding to the functional groups present, and XRD analysis, using Scherer’s equation, determined an average crystalline size of 1.2 nm for the Fe3O4 nanoparticles. TGA results demonstrated the thermal stability of the nanoparticles, SEM imaging revealed distinct honeycomb-like structures for the nanoparticles synthesized with water as the solvent, while the VSM analysis was used to determine the magnetic behavior of the nanoparticles.
基金financial supported from the Thailand Research Fund,Office of the Higher Education Commission(Grant number MRG6280220)。
文摘In this research study,magnesium-aluminum(Mg-Al)bimetallic oxide powders are synthesized via the sol-gel auto combustion method using diethanolamine(DEA)as the fuel.In order to subsequently determine the influence of calcination temperatures upon the structure,chemical bonding,morphology,optical properties,and fluorescence properties of the as-synthesized and calcined Mg-Al bimetallic oxide powders,the researcher employed X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),transmission electron microscopy(TEM),UV–visible diffuse reflectance spectroscopy(UV-DRS),and photoluminescence spectroscopy(PL),respectively.It was apparent on the basis of the XRD and FT-IR analyses that those powders undergoing calcination at temperatures of 500℃,700℃,and 900℃contained the major phase magnesium aluminate(Mg Al_(2)O_(4))spinel with trace magnesium oxide(Mg O)and hydrotalcite(Mg_(6)Al_(2)(CO_(3))(OH)_(16)).When the calcination temperature rose to 1100℃,this resulted in a single phase MgAl_(2)O_(4)while MgO and(Mg_(6)Al_(2)(CO_(3))(OH)_(16))were no longer observed.UV-DRS analysis revealed that in optimized conditions,calcination resulted in better sample absorption and reflection levels when compared to the ultraviolet,visible,and infrared spectra observed in the case of the as-synthesized sample.The bandgap energy(E_(g))for calcined samples was in the range of 2.65 e V to 5.85 e V,in contrast to the value of 4.10 e V for the as-synthesized sample.Analysis of photoluminescence showed that for the as-synthesized samples and those calcined at low temperatures,visible light was emitted only in the violet,blue,and green regions with low intensity,while for samples calcined at higher temperatures,the emissions showed greater intensity and extended to the yellow and orange regions.Multiple defect centers were found in the bandgap which can explain these findings.
基金the Deanship of Scientific Research at King Khalid University for funding this work through Large Groups Project under(RGP.2/111/44)。
文摘In this research work,sol-gel technique was employed to prepare the strontium based spinel ferrite nanoparticles(SrFe_(2)O_(4))with different ratios of terbium(Tb).Different characterization techniques were used to investigate the structural,morphological,dielectric and magnetic properties of the prepared samples.X-ray diffraction(XRD)result suggests that face-centered cube spinel nanocrystalline structure is formed.Crystallite size of the SrFe_(2)O_(4)decreases with rising of Tb ratio.The morphology,shape and size of the SrFe_(2)O_(4)were examined by scanning electron microscopy(SEM)analysis and results reveal inhomogeneous distributions of the nanostructures with high agglomeration.The electrical resistivity of the SrFe_(2)O_(4)increases with rising of Tb ratio,which is confirmed from the cyclic voltammetry.It is observed that dielectric constant of all the samples decreases with the increasing frequency range.It is determined that the dielectric constants of the spinel ferrites are frequency dependent and decrease with increasing the frequency of applied electric field.The magnetic behavior of SrFe_(2)O_(4)with different ratios of Tb was studied and it is found that the saturation magnetization values of samples decrease with increase in the substitution of Tb^(3+)at octahedral sites for Fe^(3+).This decrease in the values of M_(s) is also attributed to spin at surface of nanoparticles.
文摘Ba1-xSrxTiO3（BST）powders were fabricated by sol-gel process by using strontium carbonate for the substitution of strontium acetate.Barium acetate,strontium carbonate and titanium-tetrabutoxide were used as raw materials.The BST gel was studied by thermal analysis techniques,the physical structure of the BST powders was measured by XRD and the grain size was measured.The results showed that the powders possess a single perovskite phase after 700℃ and the ideal powder size even after 800℃ calcining.This indicated that the powder can be used for BST ceramics and the fabrication of the sol-gel derived BST can be carried out well by using carbonate as the starting materials.
