期刊文献+
共找到16篇文章
< 1 >
每页显示 20 50 100
A Novel Way to Prepareγ-A1_2O_3 Supported SO_4^(2-)/ZrO_2 Solid Superacid Catalysts for n-Butane Isomerization
1
作者 Ting LEI Yi TANG +2 位作者 Wei Ming HUA Jin Suo XU Zi GAO (Department of Chemistry, Fudan University, Shanghai 200433) 《Chinese Chemical Letters》 SCIE CAS CSCD 2000年第1期89-92,共4页
Highly active solid superacid catalysts for n-butane isomerization, SZ/A1_2O_3-P, were prepared by supporting SO-(4-2)/ZrO2, (SZ) on y-A1_2O_3 carrier using a precipitation method. The activities of some catalysts wer... Highly active solid superacid catalysts for n-butane isomerization, SZ/A1_2O_3-P, were prepared by supporting SO-(4-2)/ZrO2, (SZ) on y-A1_2O_3 carrier using a precipitation method. The activities of some catalysts were enhanced significantly j The activity of the most active sample. 60%SZ/Al_2O3-P, was even about 2 times more active than that of the SZ catalyst. 展开更多
关键词 ^SO_4^(2-)/ZrO_2 n-Butane Isomerization γ-A1_2O_3 supported superacid catalysts.
在线阅读 下载PDF
SO_4^(2-)/TiO_2-SnO_2固体超强酸催化合成乙氧喹的研究 被引量:5
2
作者 高根之 李言信 +1 位作者 袁波 裴保健 《曲阜师范大学学报(自然科学版)》 CAS 2006年第4期95-98,共4页
以对氨基苯乙醚和丙酮为原料在SO24-/TiO2-SnO2固体超强酸催化作用下,通过Michael加成合成了乙氧喹啉;并分别采用固定床、常压流动床、高压流动床对其合成工艺、反应条件进行了研究和探讨.实验结果表明:采用较高压力下的流动床催化在反... 以对氨基苯乙醚和丙酮为原料在SO24-/TiO2-SnO2固体超强酸催化作用下,通过Michael加成合成了乙氧喹啉;并分别采用固定床、常压流动床、高压流动床对其合成工艺、反应条件进行了研究和探讨.实验结果表明:采用较高压力下的流动床催化在反应温度为200℃,反应时间为10 h,催化剂的用量为5%条件下催化效果较好,最高催化产率为48.8%.该合成工艺应用固体超强酸催化剂具有较高的催化活性、催化速率快、化学稳定性好、无环境污染,是工业生产乙氧喹较理想方法,具有良好的工业生产前景. 展开更多
关键词 ^so4^2-/tio2-sno2固体超强酸 乙氧喹 固定床 流动床
在线阅读 下载PDF
固体酸SO_4^(2-)/TiO_2-Al_2O_3-SnO_2催化合成氯乙酸四甘醇双酯 被引量:3
3
作者 牛梅菊 窦建民 贺媛 《精细化工》 EI CAS CSCD 北大核心 2004年第10期798-800,共3页
以固体酸SO2-4/TiO2 Al2O3 SnO2为催化剂,氯乙酸和四甘醇为原料催化合成了氯乙酸四甘醇双酯。经实验确定的最佳反应条件为:n(氯乙酸).Mn(四甘醇)=2 5,催化剂和带水剂用量分别为反应物总质量的5%和10%,反应时间2 5h,醇的转化率达97 02%,... 以固体酸SO2-4/TiO2 Al2O3 SnO2为催化剂,氯乙酸和四甘醇为原料催化合成了氯乙酸四甘醇双酯。经实验确定的最佳反应条件为:n(氯乙酸).Mn(四甘醇)=2 5,催化剂和带水剂用量分别为反应物总质量的5%和10%,反应时间2 5h,醇的转化率达97 02%,产品收率为81 87%,产品质量分数>97%,催化剂重复使用10次,催化活性基本不变。 展开更多
关键词 ^固体超强酸so4^2-/tio2-Al2O3-sno2 氯乙酸四甘醇双酯 酯化反应
在线阅读 下载PDF
固体超强酸SO_4^(2-)/TiO_2-Al_2O_3-SnO_2催化合成DBS 被引量:1
4
作者 牛梅菊 高太明 尹汉东 《塑料工业》 CAS CSCD 北大核心 2004年第11期11-12,48,共3页
以固体超强酸SO42 -/TiO2 Al2 O3 SnO2 为催化剂、葵二酸和正丁醇为原料合成了癸二酸二丁酯 (DBS)。研究了反应时间、醇酸物质的量比、催化剂用量等对酯化率的影响。结果表明 :最佳反应条件为以 0 0 5mol葵二酸为基准 ,n (酸 )∶n (... 以固体超强酸SO42 -/TiO2 Al2 O3 SnO2 为催化剂、葵二酸和正丁醇为原料合成了癸二酸二丁酯 (DBS)。研究了反应时间、醇酸物质的量比、催化剂用量等对酯化率的影响。结果表明 :最佳反应条件为以 0 0 5mol葵二酸为基准 ,n (酸 )∶n (醇 ) =1∶4,催化剂 0 5g ,反应时间 3 5h ,此时酯化率达 97 5 % ,产品质量分数大于 98% ;催化剂重复使用 6次后 。 展开更多
关键词 ^固体超强酸so4^2-/tio2-Al2O3-sno2 催化剂 葵二酸 正丁醇 合成 癸二酸二丁酯 硫酸根 氧化钛 氧化锡
在线阅读 下载PDF
Preparation of SO_4^(2-)/TiO_2-MoO_3 Solid Superacid and Its Catalytic Activity in Acetalation and Ketalation 被引量:7
5
作者 杨水金 梁永光 +1 位作者 余协卿 孙聚堂 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2005年第1期51-55,共5页
SO4^2-/TiO2-MoO3, a novel solid superacid, has been prepared and its catalytic activity at different synthetic conditions was examined with esterification of n-butanoic acid and n-butyl alcohol as probing reaction.The... SO4^2-/TiO2-MoO3, a novel solid superacid, has been prepared and its catalytic activity at different synthetic conditions was examined with esterification of n-butanoic acid and n-butyl alcohol as probing reaction.The optimum conditions were also found, that is, the mass ratio of MoO3 used in the compound is 25%, the calcination temperature 450℃, and the soaked consistency of H2SO4 is 0.5mol.L^-1. Then it was applied in the catalytic synthesis of six similar important ketals and acetals as catalyst and revealed high catalytic activity. Under the condition that the molar ratio of aldehyde/ketone to glycol was 1:1.5, the mass ratio of the catalyst to the reactants was 0.5% and the reaction time 1.0 h, the yield of ketals and acetals reached up to 63.2%. The catalyst can be easily recovered and reused. 展开更多
关键词 ^SO_4^(2-)/tio_2-MoO_3 solid superacid ACETALAtioN katalation
在线阅读 下载PDF
固体超强酸SO_4^(2-)/TiO_2-Al_2O_3-SnO_2 催化合成苯乙酸乙酯 被引量:2
6
作者 郭海福 郝东升 《肇庆学院学报》 2001年第2期36-38,共3页
本文以固体超强酸SO4~2-/TiO2-Al2O3-SnO2为催化剂,苯乙酸和乙醇为原料合成了苯乙酸乙酯,并 对催化剂、原料配比和反应时间等酯化反应的影响因素进行了详尽讨论。
关键词 固体超强酸催化剂 ^so4^2-/tio2-Al2O3-sno2 催化合成 苯乙酸乙酯 酯化反应 原料配比 香料
在线阅读 下载PDF
Preparation of SO_4^(2-)/TiO_2-La_2O_3 solid superacid and its catalytic activities in acetalation and ketalation 被引量:4
7
作者 YANG Shui-jin BAI Ai-min SUN Ju-tang 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2006年第7期553-558,共6页
SO4^2- / TiO2-La2O3, a novel solid superacid, was prepared and its catalytic activities at different synthetic conditions are discussed with esterification of n-butanoic acid and n-butyl alcohol as probing reaction. T... SO4^2- / TiO2-La2O3, a novel solid superacid, was prepared and its catalytic activities at different synthetic conditions are discussed with esterification of n-butanoic acid and n-butyl alcohol as probing reaction. The optimum conditions have also been found, mole ratio of n(La^3+):n(Ti^4+) is 1:34, the soaked consistency of H2SO4 is 0.8 tool/L, the soaked time of HESO4 is 24 h, the calcining temperature is 480 ℃, the calcining time is 3 h. Then it was applied in the catalytic synthesis often important ketals and acetals as catalyst and revealed high catalytic activity. Under these conditions on which the molar ratio of aldehyde/ketone to glycol is l: 1.5, the mass ratio of the catalyst used in the reactants is 0.5%, and the reaction time is 1.0 h, the yields of ketals and acetals can reach 41.4%-95.8%. 展开更多
关键词 ^so4^2-/ tio2-La2O3 Rare earth solid superacid CATALYSIS
在线阅读 下载PDF
An efficient synthesis of 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one catalyzed by recyclable solid superacid SO_4^(2-)/TiO_2 under grinding condition 被引量:2
8
作者 Guo Liang Feng 《Chinese Chemical Letters》 SCIE CAS CSCD 2010年第9期1057-1061,共5页
An efficient synthesis of symmetrical 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one is achieved via a reaction of acenaphthe-nequinone and indoles catalyzed by solid superacid SO4^2-/TiO2 under solvent-free conditions... An efficient synthesis of symmetrical 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one is achieved via a reaction of acenaphthe-nequinone and indoles catalyzed by solid superacid SO4^2-/TiO2 under solvent-free conditions at room temperature by grinding, which provides an efficient route to the synthesis of symmetrical 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one.This procedure offers several advantages including solvent-free conditions,excellent yields of products,simple work-up as well as reuse of catalysts which makes it a useful and attractive protocol for the synthesis of these compounds. 展开更多
关键词 ACENAPHTHENEQUINONE Indole solid superacid ^so4^2-/tio2 2 2-Bis(1H-indol-3-yl)-2H-acenaphthen-1-one
在线阅读 下载PDF
Preparation,characterization and catalytic properties of S_2O_8^(2-)/ZrO_2-CeO_2 solid superacid catalyst 被引量:25
9
作者 樊国栋 沈茂 +1 位作者 张昭 贾发瑞 《Journal of Rare Earths》 SCIE EI CAS CSCD 2009年第3期437-442,共6页
A novel solid superacid catalyst S2O8^2-/ZrO2-CeO2 was prepared by a coprecipitation method and characterized by means of XRD FTIR, BET, TEM and DSC/TG analysis methods. The results indicated that incorporation of app... A novel solid superacid catalyst S2O8^2-/ZrO2-CeO2 was prepared by a coprecipitation method and characterized by means of XRD FTIR, BET, TEM and DSC/TG analysis methods. The results indicated that incorporation of appropriate amounts of Ce into the catalyst was beneficial to the formation of sole tetragonal ZrO2 and effectively prevented from the formation of monoclinic ZrO〉 and restrained the loss of sulfated species. XRD revealed the presence of tetragonal Ce0.16Zr0.84O2phase in the case of S2O8^2-/ZrO2-CeO2 calcined above 500 ℃. Catalytic activities of S2O8^2-/ZrO2-CeO2 for the esterification of lactic acid with n-butanol was studied. The results showed that the optimum conditions were as follows: calcination temperature of the catalyst 600 ℃, n(lactic acid):n(n-butyl alcohol)=1.0:3.0, w(S2O8^2-/ZrO2- CeO2)=12.0%, reaction temperature 145 ℃, and reaction time 2 h. The esterification efficiency of lactic acid was about 96.6%. 展开更多
关键词 solid superacid catalyst ^S2O8^2-/ZrO2-CeO2 n-butyl lactate ESTERIFICAtioN rare earths
在线阅读 下载PDF
固体超强酸SO_4^(2-)TiO_2-Fe_2O_3催化合成柠檬酸三丁酯 被引量:3
10
作者 姜业朝 陈伟 冯树林 《重庆工业高等专科学校学报》 2001年第3期27-29,共3页
制备固体酸催化剂SO42 - TiO2 -Fe2 O3,用于柠檬酸三正丁酯的合成试验 .考察了反应时间、初始进料物质的量比、催化剂用量对反应产率的影响 ,反应最佳条件为 :醇酸比 6:1,催化剂用量 2 .0g(相对于 0 .1mol的柠檬酸 ) ,加热回流反应时间 ... 制备固体酸催化剂SO42 - TiO2 -Fe2 O3,用于柠檬酸三正丁酯的合成试验 .考察了反应时间、初始进料物质的量比、催化剂用量对反应产率的影响 ,反应最佳条件为 :醇酸比 6:1,催化剂用量 2 .0g(相对于 0 .1mol的柠檬酸 ) ,加热回流反应时间 3h ,转化率达 94 .5 % ,纯度大于 99.0 % 展开更多
关键词 复合固体超强酸 催化剂 合成 柠檬酸三丁酯 催化合成 增塑剂
在线阅读 下载PDF
SO_4^(2-)/TiO_2-SnO_2催化剂的制备和表征
11
作者 武永军 吴丽 +1 位作者 卓馨 刘超 《湘南学院学报》 2018年第2期35-37,共3页
以硫酸钛和四氯化锡制备SO_4^(2-)/TiO_2-SnO_2催化剂,对SO_4^(2-)/TiO_2-SnO_2进行了红外、电镜扫描和X衍射等表征.分析表明,在TiO_2-SnO_2中,SnO_2以无定形方式分散在TiO_2表面,负载SO_4^(2-)后,SO_4^(2-)/TiO_2-SnO_2催化剂的颗粒更... 以硫酸钛和四氯化锡制备SO_4^(2-)/TiO_2-SnO_2催化剂,对SO_4^(2-)/TiO_2-SnO_2进行了红外、电镜扫描和X衍射等表征.分析表明,在TiO_2-SnO_2中,SnO_2以无定形方式分散在TiO_2表面,负载SO_4^(2-)后,SO_4^(2-)/TiO_2-SnO_2催化剂的颗粒更加细化,比表面积进一步增大,形成更多的酸中心,酸性增强,催化活性较佳. 展开更多
关键词 固体超强酸 ^so4^2-/tio2-sno2 表征
在线阅读 下载PDF
S0_4^(2-)/TiO_2-A1_20_3-Sn0_2固体超强酸的制备及其催化合成马来酸二正戊酯
12
作者 邓启玮 《杭州化工》 CAS 2002年第1期29-30,33,共3页
制备了酸强度为-14.52的SO_4^(2-)TiO_2-A1_2O_3-SnO_2固体超强酸,考察了浸渍液H_2SO_4的浓度、金属原子配比、焙烧时间对其酸强度的影响。该催化剂催化合成马来酸二正戊酯,具有很好的催化性能。
关键词 固体超强酸 ^so4^2-/tio2-Al2O3-sno2 酸强度 制备 马来酸二正戊酯 催化合成
在线阅读 下载PDF
固体超强酸TiO2/SO4^=催化合成富马酸二甲酯
13
作者 张龙 杜春城 宋志轩 《吉林工学院学报(自然科学版)》 1998年第4期6-9,共4页
研究以用TiO2/SO=4固体超强酸催化富马酸与甲醇合成富马酸二甲酯(DMF)的反应,探讨了催化剂制备条件、原料配比、反应时间、催化剂用量等工艺参数对DMF收率的影响。在适宜的工艺条件下DMF收率达到90%,催化剂的... 研究以用TiO2/SO=4固体超强酸催化富马酸与甲醇合成富马酸二甲酯(DMF)的反应,探讨了催化剂制备条件、原料配比、反应时间、催化剂用量等工艺参数对DMF收率的影响。在适宜的工艺条件下DMF收率达到90%,催化剂的重复使用实验表明,TiO2/SO=4是DMF合成的一个较适宜的催化剂。 展开更多
关键词 富马酸二甲酯 固体超强酸 催化 合成
在线阅读 下载PDF
SO_2-4/TiO_2┐Al_2O_3-SnO_2催化剂的研制及其催化合成己二酸二辛酯 被引量:106
14
作者 高根之 于世涛 杨锦宗 《催化学报》 SCIE CAS CSCD 北大核心 1996年第1期83-86,共4页
SO2-4/TiO2┐Al2O3┐SnO2催化剂的研制及其催化合成己二酸二辛酯高根之(曲阜师范大学化学系,曲阜273165)于世涛杨锦宗*(大连理工大学精细化工系,大连116012)关键词固体超强酸,SO2-4/Ti... SO2-4/TiO2┐Al2O3┐SnO2催化剂的研制及其催化合成己二酸二辛酯高根之(曲阜师范大学化学系,曲阜273165)于世涛杨锦宗*(大连理工大学精细化工系,大连116012)关键词固体超强酸,SO2-4/TiO2-Al2O3-SnO2催化剂,... 展开更多
关键词 固体超强酸 催化剂 己二酸二辛酯
在线阅读 下载PDF
丙酸正丁酯绿色合成工艺中固体酸催化剂研制 被引量:10
15
作者 杨蕾 蒋益林 +2 位作者 王鹏 王进福 周德瑞 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2003年第3期351-354,共4页
针对目前酯化工艺过程中存在的环境污染问题 ,以丙酸正丁酯催化合成为例 ,对酯化过程清洁生产工艺中固体酸催化剂的制备进行了研究 .制备了SO42 -/TiO2 固体超强酸催化剂 ,讨论了各种制备条件对该催化剂的丙酸正丁酯合成催化活性的影响 ... 针对目前酯化工艺过程中存在的环境污染问题 ,以丙酸正丁酯催化合成为例 ,对酯化过程清洁生产工艺中固体酸催化剂的制备进行了研究 .制备了SO42 -/TiO2 固体超强酸催化剂 ,讨论了各种制备条件对该催化剂的丙酸正丁酯合成催化活性的影响 ,采用TG/DTA、FTIR、XRD等仪器分析手段对催化剂结构进行了表征 ,实验结果表明 ,SO42 -/TiO2 固体超强酸催化剂具有很好的催化活性和选择性 ,且无腐蚀、反应时间短、后处理简单。 展开更多
关键词 ^SO^2-4/tio2 固体超强酸 催化剂 酯化 丙酸正丁酯
在线阅读 下载PDF
固体超强酸催化合成水杨酸正丁酯 被引量:4
16
作者 梁宇 郭俊胜 《河南化工》 CAS 2003年第4期22-23,共2页
用固体超强酸SO2 -4/Fe2 O3 -TiO2 为催化剂 ,实现了水杨酸和正丁醇反应合成水杨酸正丁酯。最佳合成条件为n(醇 )∶n(酸 ) =2 .0∶1,催化剂用量为酸质量的 5 % ,反应时间为 4 .5h ,酯化率可达 96 %。催化剂具有容易回收并可循环使用、... 用固体超强酸SO2 -4/Fe2 O3 -TiO2 为催化剂 ,实现了水杨酸和正丁醇反应合成水杨酸正丁酯。最佳合成条件为n(醇 )∶n(酸 ) =2 .0∶1,催化剂用量为酸质量的 5 % ,反应时间为 4 .5h ,酯化率可达 96 %。催化剂具有容易回收并可循环使用、不污染环境等优点。 展开更多
关键词 固体超强酸 ^so4^2-/Fe2O3-tio2 催化剂 水杨酸正丁酯 催化 水杨酸 正丁醇
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部