The effect of different extrusion parameters on the microstructure and mechanical properties of Mg-4Sm-3Gd-2Yb-0.5Zr(SGY2)alloy was investigated.It was observed that under different extrusion parameters,unDRXed grains...The effect of different extrusion parameters on the microstructure and mechanical properties of Mg-4Sm-3Gd-2Yb-0.5Zr(SGY2)alloy was investigated.It was observed that under different extrusion parameters,unDRXed grains of SGY2 alloy exhibited a pronounced basal plane texture,specifically<01.10>//ED,while the texture of DRXed grains was relatively dispersed.Under the condition of 420℃ and an extrusion ratio of 9.4(420℃-ER9.4),the basal plane texture intensity of unDRXed grains in SGY2 alloy was the highest.Furthermore,SGY2 alloy at different extrusion parameters exhibited recrystallization mechanisms mainly characterized by continuous dynamic recrystallization(CDRX),with some DRXed grains and deformed grains experiencing discontinuous dynamic recrystallization(DDRX).Additionally,at the 420℃-ER9.4,the second phase particles in the as-extruded SGY2 alloy were smaller in size and exhibited a dispersed distribution.Under this condition,a significant amount of dislocation accumulation,dislocation bypassing,and dislocation tangling phenomena were observed in the SGY2 alloy.The primary deformation mechanism of unDRXed grains in the SGY2 alloy at the 420℃-ER9.4 may involve prismatic plane,pyramidal plane,and pyramidal plane<c+a>slip,thereby activating a significant amount of dislocations.Compared to other extrusion conditions,this condition is more prone to activate non-basal plane slip.The as-extruded SGY2 alloy exhibited superior mechanical properties,with ultimate tensile strength(UTS)and yield strength(YS)of 332 MPa and 278 MPa,respectively.This is mainly attributed to the extremely fine grains,with many DRXed grains having grain sizes smaller than 1μm,and higher density grain boundaries produced under this condition.Additionally,the unDRXed grains contain a high density of dislocations with small Schmid factor(SF),thus effectively inhibiting basal plane slip and strengthening the alloy to some extent.Similarly,the increased presence of second phase particles will also contribute to strengthening the alloy matrix through precipitation hardening.展开更多
The effect of Sm-rich liquid phase （Sm2Co3） on magnetic properties and microstructure of 2：17-type Sin-Co magnet was studied. Three phases existed in liquid phase ingot, and took on white, dark grey and grey, respe...The effect of Sm-rich liquid phase （Sm2Co3） on magnetic properties and microstructure of 2：17-type Sin-Co magnet was studied. Three phases existed in liquid phase ingot, and took on white, dark grey and grey, respectively. It was found that the composition of the grey area was similar to the nominal one. Our results indicated that the optimal composition was obtained at 3 wt.% liquid phase added, and the magnetic properties were B^I 1.58 kGs, Hci〉26 kOe, （BH）m=29.51 MGOe. Br increased by 3%, Hci was 13 times larger, and （B/-/）m was 6 times bigger than none liquid phase magnets. Moreover, with the aging time decreasing from 20 to 8 h, the squareness of the demagnetization curves got better, while the coercivity of the samples decreased. It revealed that Sm（Co,Cu）5 phase also precipitated at particle boundaries. It maybe also enhanced the coercivity.展开更多
基金financially supported by the National Natural Science Foundation of China(No.52371108,52201119)Frontier Exploration Project of Longmen Laboratory,China(LMQYTSKT014).
文摘The effect of different extrusion parameters on the microstructure and mechanical properties of Mg-4Sm-3Gd-2Yb-0.5Zr(SGY2)alloy was investigated.It was observed that under different extrusion parameters,unDRXed grains of SGY2 alloy exhibited a pronounced basal plane texture,specifically<01.10>//ED,while the texture of DRXed grains was relatively dispersed.Under the condition of 420℃ and an extrusion ratio of 9.4(420℃-ER9.4),the basal plane texture intensity of unDRXed grains in SGY2 alloy was the highest.Furthermore,SGY2 alloy at different extrusion parameters exhibited recrystallization mechanisms mainly characterized by continuous dynamic recrystallization(CDRX),with some DRXed grains and deformed grains experiencing discontinuous dynamic recrystallization(DDRX).Additionally,at the 420℃-ER9.4,the second phase particles in the as-extruded SGY2 alloy were smaller in size and exhibited a dispersed distribution.Under this condition,a significant amount of dislocation accumulation,dislocation bypassing,and dislocation tangling phenomena were observed in the SGY2 alloy.The primary deformation mechanism of unDRXed grains in the SGY2 alloy at the 420℃-ER9.4 may involve prismatic plane,pyramidal plane,and pyramidal plane<c+a>slip,thereby activating a significant amount of dislocations.Compared to other extrusion conditions,this condition is more prone to activate non-basal plane slip.The as-extruded SGY2 alloy exhibited superior mechanical properties,with ultimate tensile strength(UTS)and yield strength(YS)of 332 MPa and 278 MPa,respectively.This is mainly attributed to the extremely fine grains,with many DRXed grains having grain sizes smaller than 1μm,and higher density grain boundaries produced under this condition.Additionally,the unDRXed grains contain a high density of dislocations with small Schmid factor(SF),thus effectively inhibiting basal plane slip and strengthening the alloy to some extent.Similarly,the increased presence of second phase particles will also contribute to strengthening the alloy matrix through precipitation hardening.
基金supported by the National Natural Science Foundation of China (50871032)National High Technology Research and Development Program of ChinaProgram of Beijing Municipal Science & Technology
文摘The effect of Sm-rich liquid phase （Sm2Co3） on magnetic properties and microstructure of 2：17-type Sin-Co magnet was studied. Three phases existed in liquid phase ingot, and took on white, dark grey and grey, respectively. It was found that the composition of the grey area was similar to the nominal one. Our results indicated that the optimal composition was obtained at 3 wt.% liquid phase added, and the magnetic properties were B^I 1.58 kGs, Hci〉26 kOe, （BH）m=29.51 MGOe. Br increased by 3%, Hci was 13 times larger, and （B/-/）m was 6 times bigger than none liquid phase magnets. Moreover, with the aging time decreasing from 20 to 8 h, the squareness of the demagnetization curves got better, while the coercivity of the samples decreased. It revealed that Sm（Co,Cu）5 phase also precipitated at particle boundaries. It maybe also enhanced the coercivity.
