To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
This study investigated the effect of Si addition on the microstructure and the silicide precipitation behavior in a novel near-βtitanium alloy.The results show that coarse and continuous silicides were preferentiall...This study investigated the effect of Si addition on the microstructure and the silicide precipitation behavior in a novel near-βtitanium alloy.The results show that coarse and continuous silicides were preferentially precipitated at the grain boundary during the solidification process,and theβgrain size of the as-cast alloy was refined.Dynamic recrystallization occurs under isothermal compression,and the silicide could inhibit the growth of recrystallized grains.The element redistribution and dislocation accumulation during hot deformation promote the dynamic precipitation of silicide,resulting in a discontinuous distribution of silicides at the grain boundaries.This work provides insight into how silicide dynamic precipitation will affect the microstructure and plastic deformation behavior of metal alloys.展开更多
To assess the high-temperature creep properties of titanium matrix composites for aircraft skin,the TA15 alloy,TiB/TA15 and TiB/(TA15−Si)composites with network structure were fabricated using low-energy milling and v...To assess the high-temperature creep properties of titanium matrix composites for aircraft skin,the TA15 alloy,TiB/TA15 and TiB/(TA15−Si)composites with network structure were fabricated using low-energy milling and vacuum hot pressing sintering techniques.The results show that introducing TiB and Si can reduce the steady-state creep rate by an order of magnitude at 600℃ compared to the alloy.However,the beneficial effect of Si can be maintained at 700℃ while the positive effect of TiB gradually diminishes due to the pores near TiB and interface debonding.The creep deformation mechanism of the as-sintered TiB/(TA15−Si)composite is primarily governed by dislocation climbing.The high creep resistance at 600℃ can be mainly attributed to the absence of grain boundaryαphases,load transfer by TiB whisker,and the hindrance of dislocation movement by silicides.The low steady-state creep rate at 700℃ is mainly resulted from the elimination of grain boundaryαphases as well as increased dynamic precipitation of silicides andα_(2).展开更多
Chiral topological semimetals hosting multifold fermions and exotic surface states represent a frontier in topological materials research. Among them, noncentrosymmetric cubic B20 compounds—notably transitionmetal si...Chiral topological semimetals hosting multifold fermions and exotic surface states represent a frontier in topological materials research. Among them, noncentrosymmetric cubic B20 compounds—notably transitionmetal silicides and germanides—offer a unique platform for realizing symmetry-protected topological phases and unconventional optoelectronic responses. Here, we report the physical properties of Rh Ge and Co Ge single crystals with B20 structure in detail. Transport measurements revea metallic behavior with characteristic Fermi-liquid scaling at low temperatures, while magnetization results confirm paramagnetism in both compounds. In addition,both materials exhibit low carrier concentrations with small electronic specific heat coefficients, indicating their semimetal feature with weak electronic correlations. Such high-quality Co Ge and Rh Ge single crystals provide a material platform to explore the evolution of multifold fermions and the instability of helicoid-arc surface states with spin–orbit coupling and surface environment in B20 material systems.展开更多
Zr-Y jointly modified silicide coatings were prepared on an Nb-Ti-Si-Cr based ultrahigh temperature alloy by pack cementation process. The wear behaviors of both the base alloy and coatings were comparatively studied ...Zr-Y jointly modified silicide coatings were prepared on an Nb-Ti-Si-Cr based ultrahigh temperature alloy by pack cementation process. The wear behaviors of both the base alloy and coatings were comparatively studied at room temperature and 800 ℃ using SiC balls as the counterpart. The Zr-Y jointly modified silicide coating is mainly composed of a thick （Nb,X）Si2 outer layer and a thin （Ti,Nb）5Si4 inner layer. The coatings possess much higher microhardness than the base alloy. The wear rates of both the base alloy and coatings increase with increasing the sliding loads. However, the coatings have much lower wear rates than the base alloy under the same sliding conditions. The coatings have superior anti-friction property, and can provide effective protection for the base alloy at both room temperature and 800 ℃ in air.展开更多
Silicon nanowires(Si NWs)have been widely researched as the best alternative to graphite anodes for the next-generation of high-performance lithium-ion batteries(LIBs)owing to their high capacity and low discharge pot...Silicon nanowires(Si NWs)have been widely researched as the best alternative to graphite anodes for the next-generation of high-performance lithium-ion batteries(LIBs)owing to their high capacity and low discharge potential.However,growing binder-free Si NW anodes with adequate mass loading and stable capacity is severely limited by the low surface area of planar current collectors(CCs),and is particularly challenging to achieve on standard pure-Cu substrates due to the ubiquitous formation of Li+inactive silicide phases.Here,the growth of densely-interwoven In-seeded Si NWs is facilitated by a thin-film of copper-silicide(CS)network in situ grown on a Cu-foil,allowing for a thin active NW layer(<10μm thick)and high areal loading(≈1.04 mg/cm^(2))binder-free electrode architecture.The electrode exhibits an average Coulombic efficiency(CE)of>99.6%and stable performance for>900 cycles with≈88.7%capacity retention.More significantly,it delivers a volumetric capacity of≈1086.1 m A h/cm^(3)at 5C.The full-cell versus lithium manganese oxide(LMO)cathode delivers a capacity of≈1177.1 m A h/g at 1C with a stable rate capability.This electrode architecture represents significant advances toward the development of binder-free Si NW electrodes for LIB application.展开更多
Ultra thin epitaxial CoSi 2 films are fabricated by solid state reaction of a deposited bilayer of Co(3nm)/Ti (1nm) on n Si(100) substrates at different temperatures.The local barrier heights of the CoSi 2/Si cont...Ultra thin epitaxial CoSi 2 films are fabricated by solid state reaction of a deposited bilayer of Co(3nm)/Ti (1nm) on n Si(100) substrates at different temperatures.The local barrier heights of the CoSi 2/Si contacts are determined by using the ballistic electron emission microscopy (BEEM) and its spectroscopy (BEES) at low temperature.For CoSi 2/Si contact annealed at 800℃,the spatial distribution of barrier heights,which have mean barrier height of 599meV and a standard deviation of 21meV,obeys the Gaussian Function.However,for a sample that is annealed at 700℃,the barrier heights of it are more inhomogenous.Its local barrier heights range from 152meV to 870meV,which implies the large inhomogeneity of the CoSi 2 film.展开更多
The energy, lattice parameters, electronic structures, and elastic constants of the intermetallic compound β-Nb5Si3 alloyed by Ti, Cr, Al, and Hf elements are investigated using first-principles methods based on plan...The energy, lattice parameters, electronic structures, and elastic constants of the intermetallic compound β-Nb5Si3 alloyed by Ti, Cr, Al, and Hf elements are investigated using first-principles methods based on plane-wave pseudopotential theory. From the impurity forma- tion energy calculated, it is found that Ti, Cr, and Hf prefer to occupy the NbI, NbI, and NbII site, respectively, and that Al decreases the stability of β-Nb5Si3. Ti and Cr atoms reduce the c/a ratio of crystal lattices and Hf atom transf...展开更多
Polycrystalline and epitaxial CoSi 2 films are formed on the n-Si (111) substrates by solid state reaction of the as-deposited Co single-layer and Co/Ti bilayer with Si,respectively at different annealing phase.The C...Polycrystalline and epitaxial CoSi 2 films are formed on the n-Si (111) substrates by solid state reaction of the as-deposited Co single-layer and Co/Ti bilayer with Si,respectively at different annealing phase.The CoSi 2/Si Schottky contacts are measured with the current-voltage and capacitance-voltage (I-V/C-V) techniques within the range of temperature from 90K to room temperature.The measured I-V characteristics have been analyzed with a model based on the inhomogeneity in Schottky barrier height,i.e.,at high temperatures (≥～200K) or low temperatures but with a large bias,the I-V curves can be described by using the thermionic emission theory with a Gaussian distributed barrier height over the whole junction,while at low temperatures and with a small bias,the current is dominated by some small patches with low barrier height.It results in a plateau-like section in the low temperature I-V curves around 10 -7 A.At room temperature,the barrier height of polycrystalline CoSi 2/Si deduced from the I-V curve is about 0 57eV.For epitaxial CoSi 2,the barrier height depends on its final annealing temperature and increases from 0 54eV to 0 60eV with the annealing temperature increasing from 700℃ to 900℃.展开更多
Mo silicides Mo_5Si_3 with high quality were prepared using ion beamdeposition equipment with two Filter Metal Vacuum Are Deposition (FMEVAD). When the number ofalternant deposition times was 198, total thickness of t...Mo silicides Mo_5Si_3 with high quality were prepared using ion beamdeposition equipment with two Filter Metal Vacuum Are Deposition (FMEVAD). When the number ofalternant deposition times was 198, total thickness of the coating is 40nm. The coatings withdroplet free can be readily obtained, so the surface is smooth. TEM observation shows that Mo and Sialternant deposition coating is compact structure. The fine Mo silicide grains densely distributedin the coating. The coating adherence on silicon is excellent.展开更多
Developing electromagnetic(EM) wave absorbing materials with low reflection coefficient and optimal operating frequency band is urgently needed on account of the increasingly serious EM pollution. However, the applica...Developing electromagnetic(EM) wave absorbing materials with low reflection coefficient and optimal operating frequency band is urgently needed on account of the increasingly serious EM pollution. However, the applications of common EM absorbing materials are encumbered by poor high-temperature stability, poor oxidation resistance, narrow absorption bandwidth or high density. Herein, the strong EM absorption capability and wide efficient absorption bandwidth of high entropy ceramics are reported for the first time, which are designed by a combination of the novel high entropy(HE) rare earth silicide carbides/rare earth oxides(RE3 Si2 C2/RE2 O3). Three HE powders, i.e., HERSC-1(HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)3 Si2 C2),HERSC-2 HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)3 Si2 C2/HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)2 O3) and HERSC-3(HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)3 Si2 C2/HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)2 O3), are synthesized. Although HERSC-1 exhibits a limited absorption effect(the minimum reflection loss(RLmin) is-11.6 d B at 3.4 mm) and a relatively narrow effective absorption bandwidth(EAB) of 1.7 GHz, the optimal absorption RLminvalue and EAB of HERSC-2 and HERSC-3 are-40.7 d B(at 2.9 mm), 3.4 GHz and-50.9 d B(at 2.0 mm), 4.5 GHz,respectively, demonstrating strong microwave absorption capability and wide absorption bandwidth.Considering the better stability, low density and strong EM absorption effect, HE ceramics are promising as a new type of EM absorbing materials.展开更多
In order to improve mechanical properties of refractory high entropy alloys,silicide was introduced and NbMoTiVSi_(x)(x=0,0.1,0.2,0.3,and 0.4,molar ratio) refractory high entropy alloys are prepared by vacuum arc melt...In order to improve mechanical properties of refractory high entropy alloys,silicide was introduced and NbMoTiVSi_(x)(x=0,0.1,0.2,0.3,and 0.4,molar ratio) refractory high entropy alloys are prepared by vacuum arc melting.Phase composition,micro structure evolution and mechanical properties were systematically studied.Results show that the silicide phase is formed in the alloys with addition of silicon,and the volume fraction of silicide increases from 0 to 8.3 % with increasing of silicon.Microstructure observation shows that the morphology of dendrite changes from columnar to near equiaxed,eutectic structure is formed at grain boundaries and composed of secondary BCC phase and silicide phase.The average length of the primary and second dendrites decreases with the increasing of silicon.Whereas,the ratio of eutectic structure increases from 0 to 19.8 % with the increment of silicon.The refinement of microstructure is caused by heterogeneous nucleation from the silicide.Compressive tests show that the yield and ultimate strength of the alloys increases from 1141.5 MPa to 2093.1 MPa and from 1700.1 MPa to 2374.7 MPa with increasing silicon content.The fracture strain decreases from 24.7 %-11.0 %.Fracture mechanism is changed from ductile fracture to ductile and brittle mixed fracture.The improvement of the strength is caused by grain bounda ry strengthening,which includes more boundaries around primary BCC phase and eutectic structure in grain boundary,both of them is resulted from the formation of silicide.展开更多
In order to elucidate the microstructure evolution and silicide precipitation behavior during high-temperature deformation,TiB reinforced titanium matrix composites were subjected to isothermal hot compression at 950...In order to elucidate the microstructure evolution and silicide precipitation behavior during high-temperature deformation,TiB reinforced titanium matrix composites were subjected to isothermal hot compression at 950℃,strain rate of 0.05 s^(−1) and employing different strains of 0.04,0.40,0.70 and 1.00.The results show that with the increase of strain,a decrease in the content,dynamic recrystallization of theαphase and the vertical distribution of TiB along the compression axis lead to stress stability.Meantime,continuous dynamic recrystallization reduces the orientation difference of the primaryαphase,which weakens the texture strength of the matrix.The recrystallization mechanisms are strain-induced grain boundary migration and particle stimulated nucleation by TiB.The silicide of Ti_(6)Si_(3) is mainly distributed at the interface of TiB andαphase.The precipitation of silicide is affected by element diffusion,and TiB whisker accelerates the precipitation behavior of silicide by hindering the movement of dislocations and providing nucleation particles.展开更多
Mo-12 Si-8.5 B alloys with different La2 O3 contents were fabricated by mechanical alloying and then hot pressing.The effects of La2 O3 on microstructure,room and elevated temperature mechanical properties of Mo-12 Si...Mo-12 Si-8.5 B alloys with different La2 O3 contents were fabricated by mechanical alloying and then hot pressing.The effects of La2 O3 on microstructure,room and elevated temperature mechanical properties of Mo-12 Si-8.5 B alloys were studied.The microstructure of Mo-12 Si-8.5 B alloy with La2 O3 additions exhibits a continuous α-Mo matrix,where the spherical Mo3 Si and Mo5 SiB2 intermetallic phases are distributed inside the grains and along the grain boundaries.The detailed microstructure shows that some nanoscale La2 O3 particles are dispersed mainly in the a-Mo grains and partially in the intermetallics.These La2 O3 particles can refine the grain sizes of a-Mo matrix and intermetallic,but the refining effect is limited with the La2 O3 addition further increasing.The mechanical testing results show that the La2 O3 addition simultaneously improves the compression strength and fracture toughness of Mo-12 Si-8.5 B alloy,due to that theα-Mo matrix is strengthened and toughened at ambient temperature and intermetallics are strengthened at elevated temperatures.The enhancing effect is sensitive to the amount of La2 O3 additions,and the Mo-12 Si-8.5 B alloy can obtain a better combination of strength and toughness when the content of La2 O3 is 0.9 wt%.展开更多
The characteristic of precipitation behavior of a2 phase and silicide, and the tensile properties at room temperature and 650℃after heat treatments in anovel TiAl-Sn-Zr-Mo-Nb-W-Si titanium alloy（BTi-6431 S） were in...The characteristic of precipitation behavior of a2 phase and silicide, and the tensile properties at room temperature and 650℃after heat treatments in anovel TiAl-Sn-Zr-Mo-Nb-W-Si titanium alloy（BTi-6431 S） were investigated by microstructure analysis and mechanics performance testing. The results show that no second phase precipitates after solution treatment(980 ℃/2 h, air cooling（AC）). However, when the solution-treated specimens are aged at 600 ℃（600 ℃/2 h,AC）,α;phase precipitates in the primary α phase, and the size of α;phase increases with the aging temperature increasing to 750 ℃. Meanwhile, 50-100-nm S2-type silicide particles precipitate along lamellar phase boundaries of transformed β phase after aging at 750 ℃. BTi-6431 S alloy shows the best650 ℃ ultimate tensile strength（UTS） and yield strength（YS） when treated in solution treatment. However, aging treatment results in a decline in 650 ℃ ultimate tensile strength. This may be attributed to the loss of solution strengthening due to the depletion of Al, Si and Zr of the matrix caused by the precipitation of Ti;Al and（TiZr）;Si;.Silicide is a brittle phase; therefore, its precipitation causes a sharp decrease in the room-temperature ductility of BTi-6431 S alloy.展开更多
Pure silicide coating and Y-Ce modified silicide coating were prepared on Ti-6Al-4V alloy by pack-cementation process. The structures as well as the isothermal oxidation behaviors of the coatings were comparatively st...Pure silicide coating and Y-Ce modified silicide coating were prepared on Ti-6Al-4V alloy by pack-cementation process. The structures as well as the isothermal oxidation behaviors of the coatings were comparatively studied. The results showed that both pure silicide coating and Y-Ce modified silicide coating prepared at 1080℃ for 4 h were composed of a TiSi2 outer layer, a TiSi middle layer and a Ti5Si4 inner layer. The oxidation tests showed that the Y-Ce modified silicide coating possessed much better oxidation resistance than the pure silicide coating at 1000℃, implying the beneficial effects of Y and Ce on the oxidation resistance of the coating.展开更多
The microstructure of the RE silicide alloy was studied by SEM. The feature of the phase and the distribution of Ca, P, Al were analyzed, especially the distribution of micro-cracks and its composition were determined...The microstructure of the RE silicide alloy was studied by SEM. The feature of the phase and the distribution of Ca, P, Al were analyzed, especially the distribution of micro-cracks and its composition were determined. The result demonstrates that only a few phosphides contribute to the spontaneous crumbling of the RE silicide alloy by reacting with water and forming oxide or phosphorus oxide. The phosphorus content is not the critical factor of disintegration in the alloy studied.展开更多
This paper investigates the work function adjustment of a full silicidation （Ni-FUSI） metal gate. It is found that implanting dopant into poly-Si before silicidation can modulate the work function of a Ni-FUSI metal...This paper investigates the work function adjustment of a full silicidation （Ni-FUSI） metal gate. It is found that implanting dopant into poly-Si before silicidation can modulate the work function of a Ni-FUSI metal gate efficiently. With the implantation of p-type or n-type dopants,such as BF2 ,As,and P,the work function of a Ni-FUSI metal gate can be made higher or lower to satisfy the requirement of pMOS or nMOS, respectively. But implanting a high dose of As into a poly-Si gate before silicidation will cause the delamination effect and EOT loss,and thus As dopant is not suitable to be used to adjust the work function of a Ni-FUSI metal gate. Due to the EOT reduction in the FUSI Process,the gate leakage current of a FUSI metal gate capacitor is larger than that of a poly-Si gate capacitor.展开更多
The fracture behavior of fully lamellar binary γ-TiAI alloys is extremely anisotropic with respect to the lamellar orientation. For the fully lamellar Ti-46Al-0.5W-0.5Si alloy, the existence of silicide clusters play...The fracture behavior of fully lamellar binary γ-TiAI alloys is extremely anisotropic with respect to the lamellar orientation. For the fully lamellar Ti-46Al-0.5W-0.5Si alloy, the existence of silicide clusters plays a critical role on the fracture behavior. In the present study, tensile test and three point bending test were performed at room temperature with the loading axis parallel and perpendicular to the lamellar orientation, respectively. To investigate the influence of silicide clusters on the initiation and propagation of cracks, the fracture surface and the cracks adjacent to the fracture zone of the specimens have been analyzed. Results show that the fracture process is related to the morphology and distribution of the silicide clusters. Crack preferentially initiates at and propagates along the interface of silicide and a2/7 lamellar with the loading axis perpendicular to the length direction of silicide. While the silicide can prevent the propagation of cracks from running across with the crack growth direction perpendicular to the length direction of silicide.展开更多
Lithium batteries(LIBs) with low capacity graphite anode(~372 mAh g-1) cannot meet the ever-growing demand for new energy electric vehicles and renewable energy storage.It is essential to replace graphite anode with h...Lithium batteries(LIBs) with low capacity graphite anode(~372 mAh g-1) cannot meet the ever-growing demand for new energy electric vehicles and renewable energy storage.It is essential to replace graphite anode with higher capacity anode materials for high-energy density LIBs.Silicon(Si) is well known to be a possible alternative for graphite anode due to its highest capacity(~4200 mAh g-1).Unfortunately,large volume change during lithiation and delithiation has prevented the Si anode from being commercialized.Metal silicides are a promising type of anode materials which can improve cycling stability via the accommodation of volume change by dispersing Si in the metal inactive/active matrix,while maintain greater capacity than graphite.Here,we present a classification of Si alloying with metals in periodic table of elements,review the available literature on metal silicide anodes to outline the progress in improving and understanding the electrochemical performance of various metal silicides,analyze the challenges that remain in using metal silicides,and offer perspectives regarding their future research and development as anode materials for commercial LIBs application.展开更多
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金funded by the National Natural Science Foundation of China(Nos.52371117,52171122,52275362)the Central Government Guides the Special Fund Projects of Local Scientific and Technological Development,China(Nos.YDZJSX2021A016,YDZX-20191400002149)+1 种基金the Key Project of Natural Science Foundation of Ningxia,China(No.2022AAC02077)the Natural Science Foundation of Shanxi Province,China(No.20210302124077)。
文摘This study investigated the effect of Si addition on the microstructure and the silicide precipitation behavior in a novel near-βtitanium alloy.The results show that coarse and continuous silicides were preferentially precipitated at the grain boundary during the solidification process,and theβgrain size of the as-cast alloy was refined.Dynamic recrystallization occurs under isothermal compression,and the silicide could inhibit the growth of recrystallized grains.The element redistribution and dislocation accumulation during hot deformation promote the dynamic precipitation of silicide,resulting in a discontinuous distribution of silicides at the grain boundaries.This work provides insight into how silicide dynamic precipitation will affect the microstructure and plastic deformation behavior of metal alloys.
基金financially supported by the National Key R&D Program of China(No.2022YFB3707405)the National Natural Science Foundation of China(Nos.U22A20113,52171137,52071116)+1 种基金Heilongjiang Provincial Natural Science Foundation,China(No.TD2020E001)Heilongjiang Touyan Team Program,China.
文摘To assess the high-temperature creep properties of titanium matrix composites for aircraft skin,the TA15 alloy,TiB/TA15 and TiB/(TA15−Si)composites with network structure were fabricated using low-energy milling and vacuum hot pressing sintering techniques.The results show that introducing TiB and Si can reduce the steady-state creep rate by an order of magnitude at 600℃ compared to the alloy.However,the beneficial effect of Si can be maintained at 700℃ while the positive effect of TiB gradually diminishes due to the pores near TiB and interface debonding.The creep deformation mechanism of the as-sintered TiB/(TA15−Si)composite is primarily governed by dislocation climbing.The high creep resistance at 600℃ can be mainly attributed to the absence of grain boundaryαphases,load transfer by TiB whisker,and the hindrance of dislocation movement by silicides.The low steady-state creep rate at 700℃ is mainly resulted from the elimination of grain boundaryαphases as well as increased dynamic precipitation of silicides andα_(2).
基金supported by National Key R&D Program of China (Grant Nos.2022-YFA1403800,2023YFA1406000,and 2023YFA1406500)the National Natural Science Foundation of China (Grant Nos.12274459,12474002,22171283,and 52130103)+1 种基金China Postdoctoral Science Foundation (Grant No.2023M730011)supported by the Synergetic Extreme Condition User Facility (SECUF,https://cstr.cn/31123.02.SECUF)。
文摘Chiral topological semimetals hosting multifold fermions and exotic surface states represent a frontier in topological materials research. Among them, noncentrosymmetric cubic B20 compounds—notably transitionmetal silicides and germanides—offer a unique platform for realizing symmetry-protected topological phases and unconventional optoelectronic responses. Here, we report the physical properties of Rh Ge and Co Ge single crystals with B20 structure in detail. Transport measurements revea metallic behavior with characteristic Fermi-liquid scaling at low temperatures, while magnetization results confirm paramagnetism in both compounds. In addition,both materials exhibit low carrier concentrations with small electronic specific heat coefficients, indicating their semimetal feature with weak electronic correlations. Such high-quality Co Ge and Rh Ge single crystals provide a material platform to explore the evolution of multifold fermions and the instability of helicoid-arc surface states with spin–orbit coupling and surface environment in B20 material systems.
基金Projects(51371145,51431003,U1435201,51401166)supported by the National Natural Science Foundation of ChinaProject(B080401)supported by the Programme of Introducing Talents of Discipline to Universities,China
文摘Zr-Y jointly modified silicide coatings were prepared on an Nb-Ti-Si-Cr based ultrahigh temperature alloy by pack cementation process. The wear behaviors of both the base alloy and coatings were comparatively studied at room temperature and 800 ℃ using SiC balls as the counterpart. The Zr-Y jointly modified silicide coating is mainly composed of a thick （Nb,X）Si2 outer layer and a thin （Ti,Nb）5Si4 inner layer. The coatings possess much higher microhardness than the base alloy. The wear rates of both the base alloy and coatings increase with increasing the sliding loads. However, the coatings have much lower wear rates than the base alloy under the same sliding conditions. The coatings have superior anti-friction property, and can provide effective protection for the base alloy at both room temperature and 800 ℃ in air.
基金funded by the Science Foundation Ireland (SFI)under the Principal Investigator Program under contract No.11PI-1148,16/IA/4629 and SFI 16/M-ERA/3419funding under the European Union’s Horizon 2020 Research and Innovation Program+7 种基金grant agreement No.814464 (Si-DRIVE project)IRCLA/2017/285 and SFI Research Centres AMBER,Ma REI and CONFIRM 12/RC/2302_P2,12/RC/2278_P2,and 16/RC/3918SFI for SIRG grant No.18/SIRG/5484support from the Sustainable Energy Authority of Ireland through the Research Development and Demonstration Funding Program (Grant No.19/RDD/548)Enterprise Ireland through the Innovation Partnership Program (Grant No.IP 20190910)support from the SFI Research Centre Ma REI (award reference No.12/RC/2302_P2)support from the SFI Industry RD&I Fellowship Program (21/IRDIF/9876)the EU Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Individual Fellowship Grant (843621)。
文摘Silicon nanowires(Si NWs)have been widely researched as the best alternative to graphite anodes for the next-generation of high-performance lithium-ion batteries(LIBs)owing to their high capacity and low discharge potential.However,growing binder-free Si NW anodes with adequate mass loading and stable capacity is severely limited by the low surface area of planar current collectors(CCs),and is particularly challenging to achieve on standard pure-Cu substrates due to the ubiquitous formation of Li+inactive silicide phases.Here,the growth of densely-interwoven In-seeded Si NWs is facilitated by a thin-film of copper-silicide(CS)network in situ grown on a Cu-foil,allowing for a thin active NW layer(<10μm thick)and high areal loading(≈1.04 mg/cm^(2))binder-free electrode architecture.The electrode exhibits an average Coulombic efficiency(CE)of>99.6%and stable performance for>900 cycles with≈88.7%capacity retention.More significantly,it delivers a volumetric capacity of≈1086.1 m A h/cm^(3)at 5C.The full-cell versus lithium manganese oxide(LMO)cathode delivers a capacity of≈1177.1 m A h/g at 1C with a stable rate capability.This electrode architecture represents significant advances toward the development of binder-free Si NW electrodes for LIB application.
文摘Ultra thin epitaxial CoSi 2 films are fabricated by solid state reaction of a deposited bilayer of Co(3nm)/Ti (1nm) on n Si(100) substrates at different temperatures.The local barrier heights of the CoSi 2/Si contacts are determined by using the ballistic electron emission microscopy (BEEM) and its spectroscopy (BEES) at low temperature.For CoSi 2/Si contact annealed at 800℃,the spatial distribution of barrier heights,which have mean barrier height of 599meV and a standard deviation of 21meV,obeys the Gaussian Function.However,for a sample that is annealed at 700℃,the barrier heights of it are more inhomogenous.Its local barrier heights range from 152meV to 870meV,which implies the large inhomogeneity of the CoSi 2 film.
基金Foundation of Beijing Institute of Aeronautical Materi-als (KF36060103)
文摘The energy, lattice parameters, electronic structures, and elastic constants of the intermetallic compound β-Nb5Si3 alloyed by Ti, Cr, Al, and Hf elements are investigated using first-principles methods based on plane-wave pseudopotential theory. From the impurity forma- tion energy calculated, it is found that Ti, Cr, and Hf prefer to occupy the NbI, NbI, and NbII site, respectively, and that Al decreases the stability of β-Nb5Si3. Ti and Cr atoms reduce the c/a ratio of crystal lattices and Hf atom transf...
文摘Polycrystalline and epitaxial CoSi 2 films are formed on the n-Si (111) substrates by solid state reaction of the as-deposited Co single-layer and Co/Ti bilayer with Si,respectively at different annealing phase.The CoSi 2/Si Schottky contacts are measured with the current-voltage and capacitance-voltage (I-V/C-V) techniques within the range of temperature from 90K to room temperature.The measured I-V characteristics have been analyzed with a model based on the inhomogeneity in Schottky barrier height,i.e.,at high temperatures (≥～200K) or low temperatures but with a large bias,the I-V curves can be described by using the thermionic emission theory with a Gaussian distributed barrier height over the whole junction,while at low temperatures and with a small bias,the current is dominated by some small patches with low barrier height.It results in a plateau-like section in the low temperature I-V curves around 10 -7 A.At room temperature,the barrier height of polycrystalline CoSi 2/Si deduced from the I-V curve is about 0 57eV.For epitaxial CoSi 2,the barrier height depends on its final annealing temperature and increases from 0 54eV to 0 60eV with the annealing temperature increasing from 700℃ to 900℃.
基金This work was supported by 863 High Science & Technology Committee(2001AA38020) The National Natural Science Foundation of
文摘Mo silicides Mo_5Si_3 with high quality were prepared using ion beamdeposition equipment with two Filter Metal Vacuum Are Deposition (FMEVAD). When the number ofalternant deposition times was 198, total thickness of the coating is 40nm. The coatings withdroplet free can be readily obtained, so the surface is smooth. TEM observation shows that Mo and Sialternant deposition coating is compact structure. The fine Mo silicide grains densely distributedin the coating. The coating adherence on silicon is excellent.
基金financially supported by the National Natural Science Foundation of China(Nos.51672064 and 51972089)。
文摘Developing electromagnetic(EM) wave absorbing materials with low reflection coefficient and optimal operating frequency band is urgently needed on account of the increasingly serious EM pollution. However, the applications of common EM absorbing materials are encumbered by poor high-temperature stability, poor oxidation resistance, narrow absorption bandwidth or high density. Herein, the strong EM absorption capability and wide efficient absorption bandwidth of high entropy ceramics are reported for the first time, which are designed by a combination of the novel high entropy(HE) rare earth silicide carbides/rare earth oxides(RE3 Si2 C2/RE2 O3). Three HE powders, i.e., HERSC-1(HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)3 Si2 C2),HERSC-2 HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)3 Si2 C2/HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)2 O3) and HERSC-3(HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)3 Si2 C2/HE(Tm0.2 Y0.2 Dy0.2 Gd0.2 Tb0.2)2 O3), are synthesized. Although HERSC-1 exhibits a limited absorption effect(the minimum reflection loss(RLmin) is-11.6 d B at 3.4 mm) and a relatively narrow effective absorption bandwidth(EAB) of 1.7 GHz, the optimal absorption RLminvalue and EAB of HERSC-2 and HERSC-3 are-40.7 d B(at 2.9 mm), 3.4 GHz and-50.9 d B(at 2.0 mm), 4.5 GHz,respectively, demonstrating strong microwave absorption capability and wide absorption bandwidth.Considering the better stability, low density and strong EM absorption effect, HE ceramics are promising as a new type of EM absorbing materials.
基金supported by National Natural Science Foundation of China(Grant No.51825401,51971121)Fundamental Research Funds of Henan University of Technology(Grant No.2018QNJH25)+1 种基金Scientific Research Fund of State Key Laboratory of Materials Processing and Die&Mould Technology(Grant No.P2020-023)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(NO:2016ZT06G025)。
文摘In order to improve mechanical properties of refractory high entropy alloys,silicide was introduced and NbMoTiVSi_(x)(x=0,0.1,0.2,0.3,and 0.4,molar ratio) refractory high entropy alloys are prepared by vacuum arc melting.Phase composition,micro structure evolution and mechanical properties were systematically studied.Results show that the silicide phase is formed in the alloys with addition of silicon,and the volume fraction of silicide increases from 0 to 8.3 % with increasing of silicon.Microstructure observation shows that the morphology of dendrite changes from columnar to near equiaxed,eutectic structure is formed at grain boundaries and composed of secondary BCC phase and silicide phase.The average length of the primary and second dendrites decreases with the increasing of silicon.Whereas,the ratio of eutectic structure increases from 0 to 19.8 % with the increment of silicon.The refinement of microstructure is caused by heterogeneous nucleation from the silicide.Compressive tests show that the yield and ultimate strength of the alloys increases from 1141.5 MPa to 2093.1 MPa and from 1700.1 MPa to 2374.7 MPa with increasing silicon content.The fracture strain decreases from 24.7 %-11.0 %.Fracture mechanism is changed from ductile fracture to ductile and brittle mixed fracture.The improvement of the strength is caused by grain bounda ry strengthening,which includes more boundaries around primary BCC phase and eutectic structure in grain boundary,both of them is resulted from the formation of silicide.
基金financial supports from the National Natural Science Foundation of China (No. 51871184)the Natural Science Foundation of Shandong Province, China (No. ZR2019MEM037)+1 种基金the Zhoucun School-City Integration Development Plan, China (No. 2020ZCXCZH03)the School-city Integration Development Project of Zibo, China (No. 2019ZBXC022)。
文摘In order to elucidate the microstructure evolution and silicide precipitation behavior during high-temperature deformation,TiB reinforced titanium matrix composites were subjected to isothermal hot compression at 950℃,strain rate of 0.05 s^(−1) and employing different strains of 0.04,0.40,0.70 and 1.00.The results show that with the increase of strain,a decrease in the content,dynamic recrystallization of theαphase and the vertical distribution of TiB along the compression axis lead to stress stability.Meantime,continuous dynamic recrystallization reduces the orientation difference of the primaryαphase,which weakens the texture strength of the matrix.The recrystallization mechanisms are strain-induced grain boundary migration and particle stimulated nucleation by TiB.The silicide of Ti_(6)Si_(3) is mainly distributed at the interface of TiB andαphase.The precipitation of silicide is affected by element diffusion,and TiB whisker accelerates the precipitation behavior of silicide by hindering the movement of dislocations and providing nucleation particles.
基金financially supported by the China Postdoctoral Science Foundation (No. 2016M602885)the National Natural Science Foundation of China (Nos.51371141 and 51701162)
文摘Mo-12 Si-8.5 B alloys with different La2 O3 contents were fabricated by mechanical alloying and then hot pressing.The effects of La2 O3 on microstructure,room and elevated temperature mechanical properties of Mo-12 Si-8.5 B alloys were studied.The microstructure of Mo-12 Si-8.5 B alloy with La2 O3 additions exhibits a continuous α-Mo matrix,where the spherical Mo3 Si and Mo5 SiB2 intermetallic phases are distributed inside the grains and along the grain boundaries.The detailed microstructure shows that some nanoscale La2 O3 particles are dispersed mainly in the a-Mo grains and partially in the intermetallics.These La2 O3 particles can refine the grain sizes of a-Mo matrix and intermetallic,but the refining effect is limited with the La2 O3 addition further increasing.The mechanical testing results show that the La2 O3 addition simultaneously improves the compression strength and fracture toughness of Mo-12 Si-8.5 B alloy,due to that theα-Mo matrix is strengthened and toughened at ambient temperature and intermetallics are strengthened at elevated temperatures.The enhancing effect is sensitive to the amount of La2 O3 additions,and the Mo-12 Si-8.5 B alloy can obtain a better combination of strength and toughness when the content of La2 O3 is 0.9 wt%.
基金financially supported by the National Natural Science Foundation of China (No. 51201016)
文摘The characteristic of precipitation behavior of a2 phase and silicide, and the tensile properties at room temperature and 650℃after heat treatments in anovel TiAl-Sn-Zr-Mo-Nb-W-Si titanium alloy（BTi-6431 S） were investigated by microstructure analysis and mechanics performance testing. The results show that no second phase precipitates after solution treatment(980 ℃/2 h, air cooling（AC）). However, when the solution-treated specimens are aged at 600 ℃（600 ℃/2 h,AC）,α;phase precipitates in the primary α phase, and the size of α;phase increases with the aging temperature increasing to 750 ℃. Meanwhile, 50-100-nm S2-type silicide particles precipitate along lamellar phase boundaries of transformed β phase after aging at 750 ℃. BTi-6431 S alloy shows the best650 ℃ ultimate tensile strength（UTS） and yield strength（YS） when treated in solution treatment. However, aging treatment results in a decline in 650 ℃ ultimate tensile strength. This may be attributed to the loss of solution strengthening due to the depletion of Al, Si and Zr of the matrix caused by the precipitation of Ti;Al and（TiZr）;Si;.Silicide is a brittle phase; therefore, its precipitation causes a sharp decrease in the room-temperature ductility of BTi-6431 S alloy.
基金Project supported by the Shanxi Science and Technology Research and Development Program(2013KJXX-08)
文摘Pure silicide coating and Y-Ce modified silicide coating were prepared on Ti-6Al-4V alloy by pack-cementation process. The structures as well as the isothermal oxidation behaviors of the coatings were comparatively studied. The results showed that both pure silicide coating and Y-Ce modified silicide coating prepared at 1080℃ for 4 h were composed of a TiSi2 outer layer, a TiSi middle layer and a Ti5Si4 inner layer. The oxidation tests showed that the Y-Ce modified silicide coating possessed much better oxidation resistance than the pure silicide coating at 1000℃, implying the beneficial effects of Y and Ce on the oxidation resistance of the coating.
文摘The microstructure of the RE silicide alloy was studied by SEM. The feature of the phase and the distribution of Ca, P, Al were analyzed, especially the distribution of micro-cracks and its composition were determined. The result demonstrates that only a few phosphides contribute to the spontaneous crumbling of the RE silicide alloy by reacting with water and forming oxide or phosphorus oxide. The phosphorus content is not the critical factor of disintegration in the alloy studied.
文摘This paper investigates the work function adjustment of a full silicidation （Ni-FUSI） metal gate. It is found that implanting dopant into poly-Si before silicidation can modulate the work function of a Ni-FUSI metal gate efficiently. With the implantation of p-type or n-type dopants,such as BF2 ,As,and P,the work function of a Ni-FUSI metal gate can be made higher or lower to satisfy the requirement of pMOS or nMOS, respectively. But implanting a high dose of As into a poly-Si gate before silicidation will cause the delamination effect and EOT loss,and thus As dopant is not suitable to be used to adjust the work function of a Ni-FUSI metal gate. Due to the EOT reduction in the FUSI Process,the gate leakage current of a FUSI metal gate capacitor is larger than that of a poly-Si gate capacitor.
基金supported by National Natural Science Foundation of China(Grant Nos.50975060,50901025)the National Basic Research Program of China(Grant No.2011CB610406)+2 种基金the China Postdoctoral Science Foundation(Grant Nos.201104420,20090450840)the Fundamental Research Funds for the Central Universities(Grant No.HIT.BRET1.2010008)Scientific and Technological Project in Heilongjiang Province(Grant No.GZ09A206)
文摘The fracture behavior of fully lamellar binary γ-TiAI alloys is extremely anisotropic with respect to the lamellar orientation. For the fully lamellar Ti-46Al-0.5W-0.5Si alloy, the existence of silicide clusters plays a critical role on the fracture behavior. In the present study, tensile test and three point bending test were performed at room temperature with the loading axis parallel and perpendicular to the lamellar orientation, respectively. To investigate the influence of silicide clusters on the initiation and propagation of cracks, the fracture surface and the cracks adjacent to the fracture zone of the specimens have been analyzed. Results show that the fracture process is related to the morphology and distribution of the silicide clusters. Crack preferentially initiates at and propagates along the interface of silicide and a2/7 lamellar with the loading axis perpendicular to the length direction of silicide. While the silicide can prevent the propagation of cracks from running across with the crack growth direction perpendicular to the length direction of silicide.
基金financially supported by the School-Enterprise cooperation Project(RD18200058)the Anhui Natural Science Foundation(No.1908085ME151)+2 种基金the Anhui province high-end talent Grant(DT18100044)the Key Laboratory of Marine Materials and Related Technologies,CAS(2019K07)the National Foreign Expert Introduction Plan Project(G20190219004)。
文摘Lithium batteries(LIBs) with low capacity graphite anode(~372 mAh g-1) cannot meet the ever-growing demand for new energy electric vehicles and renewable energy storage.It is essential to replace graphite anode with higher capacity anode materials for high-energy density LIBs.Silicon(Si) is well known to be a possible alternative for graphite anode due to its highest capacity(~4200 mAh g-1).Unfortunately,large volume change during lithiation and delithiation has prevented the Si anode from being commercialized.Metal silicides are a promising type of anode materials which can improve cycling stability via the accommodation of volume change by dispersing Si in the metal inactive/active matrix,while maintain greater capacity than graphite.Here,we present a classification of Si alloying with metals in periodic table of elements,review the available literature on metal silicide anodes to outline the progress in improving and understanding the electrochemical performance of various metal silicides,analyze the challenges that remain in using metal silicides,and offer perspectives regarding their future research and development as anode materials for commercial LIBs application.
