We design a pulsed power source based on the technique for explosive-driven demagnetization. The physical process and geometry structure of this power source are described in detail and several formulae are deduced to...We design a pulsed power source based on the technique for explosive-driven demagnetization. The physical process and geometry structure of this power source are described in detail and several formulae are deduced to predict some important properties of the power source. With a φ 40 mm × 20 mm× 10 mm cylindrical magnet, the maximum output voltage and current reaches 125.5 V and 862.9A, respectively. The rise time of the front edge of the output voltage is about 264ns. On the 0.05 Ω simulative load, the net power is 37kW.展开更多
Stem cell transplantation and low-energy shock-wave therapy （LESWT） have emerged as potential and effective treatment protocols for diabetic erectile dysfunction. During the tracking of transplanted stem cells in di...Stem cell transplantation and low-energy shock-wave therapy （LESWT） have emerged as potential and effective treatment protocols for diabetic erectile dysfunction. During the tracking of transplanted stem cells in diabetic erectile dysfunction models, the number of visible stem cells was rather low and decreased quickly. LESWT could recruit endogenous stem cells to the cavernous body and improve the microenvironment in diabetic cavernous tissue. Thus, we deduced that LESWT might benefit transplanted stem cell survival and improve the effects of stem cell transplantation. In this research, 42 streptozotocin-induced diabetic rats were randomized into four groups： the diabetic group （n = 6）, the LESWT group （n = 6）, the bone marrow-derived mesenchymal stem cell （BMSC） transplantation group （n = 15）, and the combination of LESWT and BMSC transplantation group （n = 15）. One and three days after BMSC transplantation, three rats were randomly chosen to observe the survival numbers of BMSCs in the cavernous body. Four weeks after BMSC transplantation, the following parameters were assessed： the surviving number of transplanted BMSCs in the cavernous tissue, erectile function, real-time polymerase chain reaction, and penile immunohistochemical assessment. Our research found that LESWT favored the survival of transplanted BMSCs in the cavernous body, which might be related to increased stromal cell-derived factor-1 expression and the enhancement of angiogenesis in the diabetic cavernous tissue. The combination of LESWT and BMSC transplantation could improve the erectile function of diabetic erectile function rats more effectively than LESWT or BMSC transplantation performed alone.展开更多
Individual grains with diverse dimensional parameters were introduced to investigate the magnetization reversals in anisotropic Nd2 Fe_(14)B magnets. The micromagnetic simulations were carried out via Object Oriented ...Individual grains with diverse dimensional parameters were introduced to investigate the magnetization reversals in anisotropic Nd2 Fe_(14)B magnets. The micromagnetic simulations were carried out via Object Oriented MicroMagnetic Framework(OOMMF). With the same bottom area and height, analysis results show that the coercive fields for different bottom shapes are of similar values. Designed as a cubic grain,the coercive field presents descending tendency as grain volume ascends. Under constant grain volume,with aspect ratio increasing, the coercive field decreases in the beginning and increases soon. Based on the demagnetization field vector, the effects of bottom shape, grain volume and aspect ratio on the coercive field can be explained. The nucleation point is chosen to discuss. Its synthetic field and reversal field are calculated by parallelogram law and inverse external field equation, respectively. The synthetic field equal to the reversal field is defined as critical field, which always shows the same tendency as the coercive field for all cases of this study. It can be concluded that critical field is qualified to be a reference index to measure the magnitude of coercive field.展开更多
The efficiency and mechanism of an active control device ＂＇Spark Jet＂ and its application in shock-induced separation control are studied using large-eddy simulation in this paper. The base flow is the interaction ...The efficiency and mechanism of an active control device ＂＇Spark Jet＂ and its application in shock-induced separation control are studied using large-eddy simulation in this paper. The base flow is the interaction of an oblique shock-wave generated by 8° wedge and a spatially-developing Ma = 2.3 turbulent boundary layer. The Reynolds number based on the incoming flow property and the boundary layer displacement thickness at the impinging point without shock-wave is 20000. The detailed numerical approaches were presented. The inflow turbulence was generated using the digital filter method to avoid artificial temporal or streamwise periodicity. The , merical results including velocity profile, Reynolds stress profile, skin friction, and wall pressure were sys- tematically validated against the available wind tunnel particle image velocimetry （PIV） measure- ments of the same flow condition. Further study on the control of flow separation due to the strong shock-viscous interaction using an active control actuator ＂＇Spark Jet＇＂ was conducted. The single-pulsed characteristic of the device was obtained and compared with the experiment. Both instantaneous and time-averaged flow fields have shown that the jet flow issuing from the actuator cavity enhances the flow mixing inside the boundary layer, making the boundary layer more resis- tant to flow separation. Skin friction coefficient distribution shows that the separation bubble length is reduced by about 35% with control exerted.展开更多
The design and measuring potential of the latest generation of the magnetic scanner called Magscanner-Maglab System （MMS） was presented. It enabled the fast acquisition of 3D signals from magnetic sensors and their ...The design and measuring potential of the latest generation of the magnetic scanner called Magscanner-Maglab System （MMS） was presented. It enabled the fast acquisition of 3D signals from magnetic sensors and their visualization as digitalized mag- netic images. This system was used for monitoring of a thermal demagnetization process of permanent magnets. The original method and measurement devices were capable for examination of magnetic, mechanical and thermal defects in cylindrical rods made of NdFeB and non-rare earth components. Effectiveness of the method and device was tested for the reference demagnetized magnet dedicated for magnetostrictive actuators.展开更多
It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development ...It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent bound- ary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation （DNS）. It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart Allmaras （S A） model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S-A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S-A model are obviously improved. Thus it can be concluded that the mod- ification of S-A model with the pressure gradient can improve the predictive accuracy for simulat- ing the shock-wave/turbulent boundary laver interaction.展开更多
The permanent magnets will be irreversibly demagnetized under high temperature and high velocity during the electromagnetic buffering.In this study,the magnetic field induced by eddy currents and the self-demagnetizin...The permanent magnets will be irreversibly demagnetized under high temperature and high velocity during the electromagnetic buffering.In this study,the magnetic field induced by eddy currents and the self-demagnetizing field of permanent magnet are taken into consideration together for demagnetization analyse.The magnetic Reynolds number is used to express the eddy currents demagnetization.The correction coefficient being expressed as the index of the air-gap width,the inner cylinder thickness,iron pole axial length and the permanent magnet demagnetization coefficient is introduced by magnetic path analysis to represent the self-demagnetization effect and the demagnetization extent.The electromagnetic buffer(EMB)prototype is tested under intensive impact loads of different strengths at room temperature.The accuracy of the nonlinear irreversible demagnetization finite element model is verified by demagnetization on damping force,velocity and displacement.Finally,high-velocity demagnetization and high-temperature demagnetization are analysed in order to obtain the distribution law of irreversible demagnetization.展开更多
The injury of gunners caused by muzzle shock-wave has always been a great problem when firing inside the protective cover. The distribution regularity and personnel injury from the muzzle blast-wave were investigated ...The injury of gunners caused by muzzle shock-wave has always been a great problem when firing inside the protective cover. The distribution regularity and personnel injury from the muzzle blast-wave were investigated by both test and numerical simulation. Through the inside firing test, the changes of overpressure and noise have been measured at different measuring points in the thin-wall cover structure with different open widths and shallow covering thickness. The distribution regularity of muzzle shock-wave with different firing port widths is calculated by ANSYS/LSDYNA software. The overpressure distribution curves of muzzle shock-wave inside the structure can be obtained by comparing the test results with the numerical results. Then, the influence of open width and shallow covering thickness is proposed to give a reference to the protective design under the condition of the inside firing with the same cannon caliber.展开更多
Degenerative diseases significantly reduce the quality of human life.Non-invasive treatments are used in the initial stages of osteoarthritis(OA).Total knee arthroplasty is used in the late stages of osteoarthritis of...Degenerative diseases significantly reduce the quality of human life.Non-invasive treatments are used in the initial stages of osteoarthritis(OA).Total knee arthroplasty is used in the late stages of osteoarthritis of the knee joint.Non-invasive methods based on mechanical action are also used for the rehabilitation of a patient after arthroplasty.This paper presents numerical models of the knee joint with degenerative OA changes and arthroplasty.Using these models,a computational study was made of the influence of the intensity of shock-wave exposure on the conditioning for the regeneration of bone and cartilage tissues.Based on the modeling results,it was found that in the knee joint with degenerative OA changes,conditions for the regeneration of cartilage and meniscus tissues were fulfilled under medium and highintensity loading.Under high-intensity loading(up to 0.9 m J/mm^(2)),the stress level was significantly below the ultimate value required for fracture.At knee arthroplasty,the conditions for bone tissue regeneration around the tibia component are fulfilled only under high-intensity loading.展开更多
Demagnetization behavior of Halbach magnetized compensated pulsed alternator(CPA)is studied by using finite element method(FEM)under the different demagnetization factors in this paper.The effect of armature reaction ...Demagnetization behavior of Halbach magnetized compensated pulsed alternator(CPA)is studied by using finite element method(FEM)under the different demagnetization factors in this paper.The effect of armature reaction magnetic field and thermal rise on demagnetization of PMs is analyzed.This paper investigates the effect of different demagnetization factors on magnetic field distribution,load current,and no-load phase voltage.A series of dynamic demagnetization points in Halbach array permanent magnet(PM)are evaluated to search the worst working point.Partial demagnetization risk can be represented by the worst working point,and the global demagnetization of the PM is represented by the no-load phase voltage characteristics after discharge.The research results demonstrated that the compensation shield with a certain thickness can increase the discharge current and weaken the demagnetization influence of armature reaction.The demagnetization effect of armature reaction on PMs at high temperatures will be strengthened.展开更多
As a auxiliary brake, Permanent Magnet Retarder （PMR） generates lots of energy and has greater temperature-rise when PMR works, so that it has a direct impact on PMR work performance and even causes demagnetization ...As a auxiliary brake, Permanent Magnet Retarder （PMR） generates lots of energy and has greater temperature-rise when PMR works, so that it has a direct impact on PMR work performance and even causes demagnetization seriously. In order to analyze permanent magnet （PM） demagnetization in high-temperature in PMR, PMR mathematical model is established firstly, and the boundary conditions of finite element analysis are determined. Then the eddy current field distribution in the rotor is determined by solving eddy current demagnetization field, and PM dynamic permeance coefficient is obtained. Combined with PM demagnetization curve analysis, PMR permanent magnet demagnetization properties are analyzed. The analysis result is validated by the bench test. It shows that part of PM is demagnetized when PRM continues working for about 15 minutes, and the braking performance is declined. Finally, three PMR optimization design methods are proposed.展开更多
A three-dimentional finite element micromagnetic algorithm was developed to study the magnetization reversal of Pr2Fe14B single-phase nanocrystalline permanent magnets. A single-phase nanocrystalline Pr2Fe14B magnets ...A three-dimentional finite element micromagnetic algorithm was developed to study the magnetization reversal of Pr2Fe14B single-phase nanocrystalline permanent magnets. A single-phase nanocrystalline Pr2Fe14B magnets composed of 216 irregular shaped grains was built. The magnetic hysteresis loops were simulated by micromagnetic finite element method. The contribution of intergrain exchange coupling ment degree （IGEC） to remanence enhancement is considered related to the alignin oriented magnets, and decreased with improved grain alignment. For the magnets with perfectly crystallo- graphic alignment of grains, the contribution of IGEC to remanence enhancement is nearly zero. The shape of demagnetization curve is not only dependent on grain alignment degree but also on the strength of IGEC in magnets.展开更多
Based on the observation of temperature variation of both domain structure and magnetic con- trast.the thermal demagnetization and randomness of domain nucleation was discussed.
For static magnetic properties of the Co/Ni bilayers,macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by the object oriented micromagnetic framework(OOMMF).It is found th...For static magnetic properties of the Co/Ni bilayers,macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by the object oriented micromagnetic framework(OOMMF).It is found that when the bilayer systems are fully decoupled,the magnetizations of the two phases reverse separately.The coercivity of the bilayers decreases to a valley value sharply with increasing interfacial exchange coupling and then rises slowly to a platform.On the other hand,we have carried out an atomistic simulation for the laser-induced ultrafast demagnetization of the Co/Ni bilayer.A larger damping constant leads to a faster demagnetization as well as a larger degree of demagnetization,which is consistent with the first-principle theoretical results.For the magnetization recovery process,the damping constant has different influences on the recovery time with various peak electron temperatures,which is ignored in previous atomistic simulations as well as the Landau–Liftshit–Bloch(LLB)micromagnetic calculations.Furthermore,as the interfacial exchange coupling increases,the ultrafast demagnetization curves for Co and Ni become coincident,which is a demonstration for the transition from two-phase phenomenon to single-phase phenomenon.展开更多
The demagnetization process and the coercivity mechanism for amsotropic HDDR Nd(Fe,Co)B bonded magnets were studied by comparing the dependence of coercivity on the alignment field applied while the powders were press...The demagnetization process and the coercivity mechanism for amsotropic HDDR Nd(Fe,Co)B bonded magnets were studied by comparing the dependence of coercivity on the alignment field applied while the powders were pressed. The results showed that both the remanence and the coercivity of magnet increased with increasing alignment field. The demagnetization process of the magnet can be classified as the nucleation process inside the grains and the domain-wall motion between the grains. The combined effect of two processes determines the coercivity of HDDR NdFeB bonded magnets.展开更多
Accurate prediction of Shock-Wave/Boundary Layer Interaction(SWBLI)flows has been a persistent challenge for linear eddy viscosity models.A major limitation lies in the isotropic representation of the Reynolds stress,...Accurate prediction of Shock-Wave/Boundary Layer Interaction(SWBLI)flows has been a persistent challenge for linear eddy viscosity models.A major limitation lies in the isotropic representation of the Reynolds stress,as assumed under the Boussinesq approximation.Recent studies have shown promise in improving the prediction capability for incompressible separation flows by perturbing the Reynolds-stress anisotropy tensor.However,it remains uncertain whether this approach is effective for SWBLI flows,which involve compressibility and discontinuity.To address this issue,this study systematically quantifies the structural uncertainty of the anisotropy for oblique SWBLI flows.The eigenspace perturbation method is applied to perturb the anisotropy tensor predicted by the Menter Shear–Stress Transport(SST)model and reveal the impacts of anisotropy on the prediction of quantities of interest,such as separation and reattachment positions,wall static pressure,skin friction,and heat flux.The results demonstrate the potential and reveal the challenges of eigenspace perturbation in improving the SST model.Furthermore,a detailed analysis of turbulent characteristics is performed to identify the source of uncertainty.The findings indicate that eigenspace perturbation primarily affects turbulent shear stress,while the prediction error of the SST model is more related to turbulent kinetic energy.展开更多
In this paper, the quantum hydrodynamics (QHD) model is used to study the propagation of small- but finite-amplitude quantum electrostatic shock-wave in an inertial-less symmetric pair (ion) plasma with immobile backg...In this paper, the quantum hydrodynamics (QHD) model is used to study the propagation of small- but finite-amplitude quantum electrostatic shock-wave in an inertial-less symmetric pair (ion) plasma with immobile background positive constituents. The dispersion due to the quantum tunneling and inertial effects as well as dissipation caused by particle collisions leading to the shock-like or double-layer structures are considered. Investigation of both the stationary and traveling-wave solutions to Kortewege-de Veries-Burgers evolution equation show that critical values exist which govern the type of collective plasma structures. Current analysis apply to diverse kind of symmetric plasmas such as laboratory inertially confined or astrophysical pair-ion or electron-positron degenerate plasmas.展开更多
In this study, we investigate the demagnetization resistance of a concentrated winding IPMSM （interior permanent magnet synchronous motor） accounting for field weakening control by changing the magnetization directi...In this study, we investigate the demagnetization resistance of a concentrated winding IPMSM （interior permanent magnet synchronous motor） accounting for field weakening control by changing the magnetization direction of the permanent magnet under a high-temperature environment. IPMSMs are investigated by FEA （finite element analysis） using the same volume of the permanent magnet while changing the magnet’s width, thickness and magnetic field orientation angle. FEA found that a V-shaped angle Va = 100° and a changed magnet length of 97% using an oblique magnetic-field-oriented magnet strike a good balance between demagnetization resistance and torque at 180 ℃. Comparison between demagnetization of negative d-axis current （current phase β = 90°） and demagnetization of field weakening control （β = 80°） using concentrated winding IPMSM with V-shaped angle Va = 100° is conducted. With the demagnetization factor at β = 80° for β = 90°, the demagnetization factor 0.39 （2.6 times） at α = 0° decreases to 0.23 （4.3 times） at α = 20°. The demagnetization resistance in the field weakening control is further improved.展开更多
Cross polarization(CP)is a widely used solid-state nuclear magnetic resonance(NMR)technique for enhancing the polarization of dilute S spins from much larger polarization of abundant I spins such as 1 H.To achieve suc...Cross polarization(CP)is a widely used solid-state nuclear magnetic resonance(NMR)technique for enhancing the polarization of dilute S spins from much larger polarization of abundant I spins such as 1 H.To achieve such a polarization transfer,the I spin should either be spin-locked or be converted to the dipolar ordered state through adiabatic demagnetization in the rotating frame.In this work,we analyze the spin dynamics of the Hartmann-Hahn CP(HHCP)utilizing the 1 H spin-locking,and the dipolar-order CP(DOCP)having the 1 H adiabatic demagnetization.We further propose an adiabatic demagnetization CP(ADCP)where a constant radio-frequency pulse is applied on the S spin while 1 H is adiabatically demagnetized.Our analyses indicate that ADCP utilizes the adiabatic passage to effectively achieve the polarization transfer from the 1 H to S spins.In addition,the dipolar ordered state generated during the 1 H demagnetization process could also be converted into the observable S polarization through DOCP,further enhancing the polarized signals.It is shown by both static and magic-angle-spinning(MAS)NMR experiments that ADCP has dramatically broadened the CP matching condition over the other CP schemes.Various samples have been used to demonstrate the polarization transfer efficiency of this newly proposed ADCP scheme.展开更多
Permanent magnets with high energy products are widely used in a variety of electromagnetic devices. Such devices can be found in marine, aerospace, and robotic applications which require the minimization of weight an...Permanent magnets with high energy products are widely used in a variety of electromagnetic devices. Such devices can be found in marine, aerospace, and robotic applications which require the minimization of weight and volume of the electromagnetic device. During the magnetizing process, the magnet may not be perfectly magnetized. Therefore, it needs to be demagnetized. Because of high coercivity of some permanent magnets, the demagnetization process requires the intense magnetic fields in close proximity with the magnetic material. The fields must be produced for a short period of time （millisecond range） and they also must be bidirectional in order to overcome the coercivity of magnetic material. Different parameters have been known to affect the demagnetizer operation such as the core shape, core material, turn number, cross section of air gap, magnet type and so on. The amplitude and waveform of the fixture current is obtained from PSPICE simulations and also from experimental measurement. A 2D finite element analysis is developed to simulate the magnetic fields and the mechanical forces. In this paper, the main parameters affecting the optimal design of the demagnetizer are discussed. Simulation results show that the core structure, air gap width, and turn numbers are the most important parameters when designing such a device.展开更多
文摘We design a pulsed power source based on the technique for explosive-driven demagnetization. The physical process and geometry structure of this power source are described in detail and several formulae are deduced to predict some important properties of the power source. With a φ 40 mm × 20 mm× 10 mm cylindrical magnet, the maximum output voltage and current reaches 125.5 V and 862.9A, respectively. The rise time of the front edge of the output voltage is about 264ns. On the 0.05 Ω simulative load, the net power is 37kW.
文摘Stem cell transplantation and low-energy shock-wave therapy （LESWT） have emerged as potential and effective treatment protocols for diabetic erectile dysfunction. During the tracking of transplanted stem cells in diabetic erectile dysfunction models, the number of visible stem cells was rather low and decreased quickly. LESWT could recruit endogenous stem cells to the cavernous body and improve the microenvironment in diabetic cavernous tissue. Thus, we deduced that LESWT might benefit transplanted stem cell survival and improve the effects of stem cell transplantation. In this research, 42 streptozotocin-induced diabetic rats were randomized into four groups： the diabetic group （n = 6）, the LESWT group （n = 6）, the bone marrow-derived mesenchymal stem cell （BMSC） transplantation group （n = 15）, and the combination of LESWT and BMSC transplantation group （n = 15）. One and three days after BMSC transplantation, three rats were randomly chosen to observe the survival numbers of BMSCs in the cavernous body. Four weeks after BMSC transplantation, the following parameters were assessed： the surviving number of transplanted BMSCs in the cavernous tissue, erectile function, real-time polymerase chain reaction, and penile immunohistochemical assessment. Our research found that LESWT favored the survival of transplanted BMSCs in the cavernous body, which might be related to increased stromal cell-derived factor-1 expression and the enhancement of angiogenesis in the diabetic cavernous tissue. The combination of LESWT and BMSC transplantation could improve the erectile function of diabetic erectile function rats more effectively than LESWT or BMSC transplantation performed alone.
基金Project supported by the National Natural Science Foundation of China(51590882,51871063)
文摘Individual grains with diverse dimensional parameters were introduced to investigate the magnetization reversals in anisotropic Nd2 Fe_(14)B magnets. The micromagnetic simulations were carried out via Object Oriented MicroMagnetic Framework(OOMMF). With the same bottom area and height, analysis results show that the coercive fields for different bottom shapes are of similar values. Designed as a cubic grain,the coercive field presents descending tendency as grain volume ascends. Under constant grain volume,with aspect ratio increasing, the coercive field decreases in the beginning and increases soon. Based on the demagnetization field vector, the effects of bottom shape, grain volume and aspect ratio on the coercive field can be explained. The nucleation point is chosen to discuss. Its synthetic field and reversal field are calculated by parallelogram law and inverse external field equation, respectively. The synthetic field equal to the reversal field is defined as critical field, which always shows the same tendency as the coercive field for all cases of this study. It can be concluded that critical field is qualified to be a reference index to measure the magnitude of coercive field.
基金supported by the National Natural Science Foundation of China(Nos.11302012,51420105008,51476004,11572025 and 51136003)the National Basic Research Program of China(No.2012CB720205)The computational time for the present study was provided by the UK Turbulence Consortium(EPSRC grant EP/L000261/1)
文摘The efficiency and mechanism of an active control device ＂＇Spark Jet＂ and its application in shock-induced separation control are studied using large-eddy simulation in this paper. The base flow is the interaction of an oblique shock-wave generated by 8° wedge and a spatially-developing Ma = 2.3 turbulent boundary layer. The Reynolds number based on the incoming flow property and the boundary layer displacement thickness at the impinging point without shock-wave is 20000. The detailed numerical approaches were presented. The inflow turbulence was generated using the digital filter method to avoid artificial temporal or streamwise periodicity. The , merical results including velocity profile, Reynolds stress profile, skin friction, and wall pressure were sys- tematically validated against the available wind tunnel particle image velocimetry （PIV） measure- ments of the same flow condition. Further study on the control of flow separation due to the strong shock-viscous interaction using an active control actuator ＂＇Spark Jet＇＂ was conducted. The single-pulsed characteristic of the device was obtained and compared with the experiment. Both instantaneous and time-averaged flow fields have shown that the jet flow issuing from the actuator cavity enhances the flow mixing inside the boundary layer, making the boundary layer more resis- tant to flow separation. Skin friction coefficient distribution shows that the separation bubble length is reduced by about 35% with control exerted.
文摘The design and measuring potential of the latest generation of the magnetic scanner called Magscanner-Maglab System （MMS） was presented. It enabled the fast acquisition of 3D signals from magnetic sensors and their visualization as digitalized mag- netic images. This system was used for monitoring of a thermal demagnetization process of permanent magnets. The original method and measurement devices were capable for examination of magnetic, mechanical and thermal defects in cylindrical rods made of NdFeB and non-rare earth components. Effectiveness of the method and device was tested for the reference demagnetized magnet dedicated for magnetostrictive actuators.
基金supported by the National Natural Science Foundation of China (No.11302012,51376001,51136003)the National Basic Research Program of China (No.2012CB720205)+3 种基金the National Magnetic Confinement Fusion Research Program of China (No.2012GB102006)the Aeronautical Science Foundation of China (No.2012ZB51014)the ‘‘111’’ Project(No.B08009)the Astronautical Technology Innovation Foundation of China
文摘It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent bound- ary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation （DNS）. It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart Allmaras （S A） model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S-A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S-A model are obviously improved. Thus it can be concluded that the mod- ification of S-A model with the pressure gradient can improve the predictive accuracy for simulat- ing the shock-wave/turbulent boundary laver interaction.
基金primarily supported by the National Natural Science Foundation of China(grant number 301070603)。
文摘The permanent magnets will be irreversibly demagnetized under high temperature and high velocity during the electromagnetic buffering.In this study,the magnetic field induced by eddy currents and the self-demagnetizing field of permanent magnet are taken into consideration together for demagnetization analyse.The magnetic Reynolds number is used to express the eddy currents demagnetization.The correction coefficient being expressed as the index of the air-gap width,the inner cylinder thickness,iron pole axial length and the permanent magnet demagnetization coefficient is introduced by magnetic path analysis to represent the self-demagnetization effect and the demagnetization extent.The electromagnetic buffer(EMB)prototype is tested under intensive impact loads of different strengths at room temperature.The accuracy of the nonlinear irreversible demagnetization finite element model is verified by demagnetization on damping force,velocity and displacement.Finally,high-velocity demagnetization and high-temperature demagnetization are analysed in order to obtain the distribution law of irreversible demagnetization.
基金Supported by National Natural Science Foundation of China (No. 50578082)
文摘The injury of gunners caused by muzzle shock-wave has always been a great problem when firing inside the protective cover. The distribution regularity and personnel injury from the muzzle blast-wave were investigated by both test and numerical simulation. Through the inside firing test, the changes of overpressure and noise have been measured at different measuring points in the thin-wall cover structure with different open widths and shallow covering thickness. The distribution regularity of muzzle shock-wave with different firing port widths is calculated by ANSYS/LSDYNA software. The overpressure distribution curves of muzzle shock-wave inside the structure can be obtained by comparing the test results with the numerical results. Then, the influence of open width and shallow covering thickness is proposed to give a reference to the protective design under the condition of the inside firing with the same cannon caliber.
基金financial support of the Russian Foundation for Basic Research,grant No.20-08-00818(simulation results)the Government research assignment for ISPMS SB RAS,project FWRW-2021-009(in-house software development)。
文摘Degenerative diseases significantly reduce the quality of human life.Non-invasive treatments are used in the initial stages of osteoarthritis(OA).Total knee arthroplasty is used in the late stages of osteoarthritis of the knee joint.Non-invasive methods based on mechanical action are also used for the rehabilitation of a patient after arthroplasty.This paper presents numerical models of the knee joint with degenerative OA changes and arthroplasty.Using these models,a computational study was made of the influence of the intensity of shock-wave exposure on the conditioning for the regeneration of bone and cartilage tissues.Based on the modeling results,it was found that in the knee joint with degenerative OA changes,conditions for the regeneration of cartilage and meniscus tissues were fulfilled under medium and highintensity loading.Under high-intensity loading(up to 0.9 m J/mm^(2)),the stress level was significantly below the ultimate value required for fracture.At knee arthroplasty,the conditions for bone tissue regeneration around the tibia component are fulfilled only under high-intensity loading.
基金This work was supported by the Natural Science Foundation of China under Grant 51307031 and part by the Natural Science Foundation of Heilongjiang Province under Grant E2018034 and China Postdoctoral Science Foundation funded project under Grant 2019M651185.
文摘Demagnetization behavior of Halbach magnetized compensated pulsed alternator(CPA)is studied by using finite element method(FEM)under the different demagnetization factors in this paper.The effect of armature reaction magnetic field and thermal rise on demagnetization of PMs is analyzed.This paper investigates the effect of different demagnetization factors on magnetic field distribution,load current,and no-load phase voltage.A series of dynamic demagnetization points in Halbach array permanent magnet(PM)are evaluated to search the worst working point.Partial demagnetization risk can be represented by the worst working point,and the global demagnetization of the PM is represented by the no-load phase voltage characteristics after discharge.The research results demonstrated that the compensation shield with a certain thickness can increase the discharge current and weaken the demagnetization influence of armature reaction.The demagnetization effect of armature reaction on PMs at high temperatures will be strengthened.
文摘As a auxiliary brake, Permanent Magnet Retarder （PMR） generates lots of energy and has greater temperature-rise when PMR works, so that it has a direct impact on PMR work performance and even causes demagnetization seriously. In order to analyze permanent magnet （PM） demagnetization in high-temperature in PMR, PMR mathematical model is established firstly, and the boundary conditions of finite element analysis are determined. Then the eddy current field distribution in the rotor is determined by solving eddy current demagnetization field, and PM dynamic permeance coefficient is obtained. Combined with PM demagnetization curve analysis, PMR permanent magnet demagnetization properties are analyzed. The analysis result is validated by the bench test. It shows that part of PM is demagnetized when PRM continues working for about 15 minutes, and the braking performance is declined. Finally, three PMR optimization design methods are proposed.
文摘A three-dimentional finite element micromagnetic algorithm was developed to study the magnetization reversal of Pr2Fe14B single-phase nanocrystalline permanent magnets. A single-phase nanocrystalline Pr2Fe14B magnets composed of 216 irregular shaped grains was built. The magnetic hysteresis loops were simulated by micromagnetic finite element method. The contribution of intergrain exchange coupling ment degree （IGEC） to remanence enhancement is considered related to the alignin oriented magnets, and decreased with improved grain alignment. For the magnets with perfectly crystallo- graphic alignment of grains, the contribution of IGEC to remanence enhancement is nearly zero. The shape of demagnetization curve is not only dependent on grain alignment degree but also on the strength of IGEC in magnets.
文摘Based on the observation of temperature variation of both domain structure and magnetic con- trast.the thermal demagnetization and randomness of domain nucleation was discussed.
基金Project supported by the National Basic Research Program of China(Grant Nos.2015CB921403 and 2016YFA0300701)the National Natural Science Foundation of China(Grant Nos.91622126,51427801,and 51671212)the Natural Science Foundation of Hebei Province,China(Grant No.A2015203021)
文摘For static magnetic properties of the Co/Ni bilayers,macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by the object oriented micromagnetic framework(OOMMF).It is found that when the bilayer systems are fully decoupled,the magnetizations of the two phases reverse separately.The coercivity of the bilayers decreases to a valley value sharply with increasing interfacial exchange coupling and then rises slowly to a platform.On the other hand,we have carried out an atomistic simulation for the laser-induced ultrafast demagnetization of the Co/Ni bilayer.A larger damping constant leads to a faster demagnetization as well as a larger degree of demagnetization,which is consistent with the first-principle theoretical results.For the magnetization recovery process,the damping constant has different influences on the recovery time with various peak electron temperatures,which is ignored in previous atomistic simulations as well as the Landau–Liftshit–Bloch(LLB)micromagnetic calculations.Furthermore,as the interfacial exchange coupling increases,the ultrafast demagnetization curves for Co and Ni become coincident,which is a demonstration for the transition from two-phase phenomenon to single-phase phenomenon.
文摘The demagnetization process and the coercivity mechanism for amsotropic HDDR Nd(Fe,Co)B bonded magnets were studied by comparing the dependence of coercivity on the alignment field applied while the powders were pressed. The results showed that both the remanence and the coercivity of magnet increased with increasing alignment field. The demagnetization process of the magnet can be classified as the nucleation process inside the grains and the domain-wall motion between the grains. The combined effect of two processes determines the coercivity of HDDR NdFeB bonded magnets.
基金supported by the National Natural Science Foundation of China(Nos.92252201 and 11721202)。
文摘Accurate prediction of Shock-Wave/Boundary Layer Interaction(SWBLI)flows has been a persistent challenge for linear eddy viscosity models.A major limitation lies in the isotropic representation of the Reynolds stress,as assumed under the Boussinesq approximation.Recent studies have shown promise in improving the prediction capability for incompressible separation flows by perturbing the Reynolds-stress anisotropy tensor.However,it remains uncertain whether this approach is effective for SWBLI flows,which involve compressibility and discontinuity.To address this issue,this study systematically quantifies the structural uncertainty of the anisotropy for oblique SWBLI flows.The eigenspace perturbation method is applied to perturb the anisotropy tensor predicted by the Menter Shear–Stress Transport(SST)model and reveal the impacts of anisotropy on the prediction of quantities of interest,such as separation and reattachment positions,wall static pressure,skin friction,and heat flux.The results demonstrate the potential and reveal the challenges of eigenspace perturbation in improving the SST model.Furthermore,a detailed analysis of turbulent characteristics is performed to identify the source of uncertainty.The findings indicate that eigenspace perturbation primarily affects turbulent shear stress,while the prediction error of the SST model is more related to turbulent kinetic energy.
文摘In this paper, the quantum hydrodynamics (QHD) model is used to study the propagation of small- but finite-amplitude quantum electrostatic shock-wave in an inertial-less symmetric pair (ion) plasma with immobile background positive constituents. The dispersion due to the quantum tunneling and inertial effects as well as dissipation caused by particle collisions leading to the shock-like or double-layer structures are considered. Investigation of both the stationary and traveling-wave solutions to Kortewege-de Veries-Burgers evolution equation show that critical values exist which govern the type of collective plasma structures. Current analysis apply to diverse kind of symmetric plasmas such as laboratory inertially confined or astrophysical pair-ion or electron-positron degenerate plasmas.
文摘In this study, we investigate the demagnetization resistance of a concentrated winding IPMSM （interior permanent magnet synchronous motor） accounting for field weakening control by changing the magnetization direction of the permanent magnet under a high-temperature environment. IPMSMs are investigated by FEA （finite element analysis） using the same volume of the permanent magnet while changing the magnet’s width, thickness and magnetic field orientation angle. FEA found that a V-shaped angle Va = 100° and a changed magnet length of 97% using an oblique magnetic-field-oriented magnet strike a good balance between demagnetization resistance and torque at 180 ℃. Comparison between demagnetization of negative d-axis current （current phase β = 90°） and demagnetization of field weakening control （β = 80°） using concentrated winding IPMSM with V-shaped angle Va = 100° is conducted. With the demagnetization factor at β = 80° for β = 90°, the demagnetization factor 0.39 （2.6 times） at α = 0° decreases to 0.23 （4.3 times） at α = 20°. The demagnetization resistance in the field weakening control is further improved.
基金supported by the NSF Cooperative Agreement DMR-1644779the State of Florida.X.H.P.acknowledges the supports from the National Key R&D Program of China(Grants No.2018YFA0306600)+1 种基金the National Science Foundation of China(Grants No.11927811,12150014)Anhui Initiative in Quantum Information Technologies(Grant No.AHY050000).
文摘Cross polarization(CP)is a widely used solid-state nuclear magnetic resonance(NMR)technique for enhancing the polarization of dilute S spins from much larger polarization of abundant I spins such as 1 H.To achieve such a polarization transfer,the I spin should either be spin-locked or be converted to the dipolar ordered state through adiabatic demagnetization in the rotating frame.In this work,we analyze the spin dynamics of the Hartmann-Hahn CP(HHCP)utilizing the 1 H spin-locking,and the dipolar-order CP(DOCP)having the 1 H adiabatic demagnetization.We further propose an adiabatic demagnetization CP(ADCP)where a constant radio-frequency pulse is applied on the S spin while 1 H is adiabatically demagnetized.Our analyses indicate that ADCP utilizes the adiabatic passage to effectively achieve the polarization transfer from the 1 H to S spins.In addition,the dipolar ordered state generated during the 1 H demagnetization process could also be converted into the observable S polarization through DOCP,further enhancing the polarized signals.It is shown by both static and magic-angle-spinning(MAS)NMR experiments that ADCP has dramatically broadened the CP matching condition over the other CP schemes.Various samples have been used to demonstrate the polarization transfer efficiency of this newly proposed ADCP scheme.
文摘Permanent magnets with high energy products are widely used in a variety of electromagnetic devices. Such devices can be found in marine, aerospace, and robotic applications which require the minimization of weight and volume of the electromagnetic device. During the magnetizing process, the magnet may not be perfectly magnetized. Therefore, it needs to be demagnetized. Because of high coercivity of some permanent magnets, the demagnetization process requires the intense magnetic fields in close proximity with the magnetic material. The fields must be produced for a short period of time （millisecond range） and they also must be bidirectional in order to overcome the coercivity of magnetic material. Different parameters have been known to affect the demagnetizer operation such as the core shape, core material, turn number, cross section of air gap, magnet type and so on. The amplitude and waveform of the fixture current is obtained from PSPICE simulations and also from experimental measurement. A 2D finite element analysis is developed to simulate the magnetic fields and the mechanical forces. In this paper, the main parameters affecting the optimal design of the demagnetizer are discussed. Simulation results show that the core structure, air gap width, and turn numbers are the most important parameters when designing such a device.
