Inexpensive flocculant-modified iron tailings sand(ITS)were converted into effective flocculation materials for cyanobacteria blooms.After composite modification with polyaluminum chloride(PAC)and polyacrylamide(PAM),...Inexpensive flocculant-modified iron tailings sand(ITS)were converted into effective flocculation materials for cyanobacteria blooms.After composite modification with polyaluminum chloride(PAC)and polyacrylamide(PAM),the surface charge of ITS was altered from negative to positive,and surface adhesion was increased by~1.5 times.PAC/PAM-modified ITS(PP-ITS)had strong flocculating effects on cyanobacteria,facilitating their removal.When the dosage of PP-ITS was 150 mg/L and the ratio of flocculant to ITS was 1:20,the elimination rate of cyanobacteria was as high as 90%.The flocs formed were better than those with chitosan-modified clays(CS-CA)and PAC-modified ITS(PAC-ITS)in terms of settling velocity,size,and recovery ability.The positively charged groups in the flocculant,such as-NH_(2) and Al^(3+),are attracted to negatively charged ions on the surface of ITS,altering the surface charge.Additionally,hydrogen bonds could form between amide side groups,and surface adhesion was improved through molecular association.Coupled with the strong bridging and sweeping effects of the flocculant,the flocs generated by PP-ITS formed rapidly and were large and resilient.The use of PP-ITS could effectively treat cyanobacteria blooms as well as solve the problem of ore tailings disposal.These results are of practical importance for engineering strategies to control cyanobacteria blooms,though there are still some issues that need to be addressed,such as how cyanobacteria flocs are collected and utilized after settling.展开更多
Pollution of transboundary rivers can result from anthropogenic activities in their watersheds.In this study,sediment traps were deployed to determine the fluxes,concentrations,and health risks associated with arsenic...Pollution of transboundary rivers can result from anthropogenic activities in their watersheds.In this study,sediment traps were deployed to determine the fluxes,concentrations,and health risks associated with arsenic,cadmium,mercury,lead,and iron in the estuaries of three transboundary rivers(Comoé,Bia,and Tanoé)in West Africa.Thus,the analysis of metal-associated sedimentation particle samples collected in rainy,flood,and dry seasons was required.Sediment traps were used to calculate the metal fluxes associated with sedimentation particles towards the Atlantic Ocean.Finally,the carcinogenic and non-carcinogenic risks of ingestion and dermal contact associated with sedimentation particles were assessed.The results showed that the total concentrations of trace metals in particulate matter were higher than in the UCC(Upper Crust Continental),with the exception of lead.The highest fluxes of lead,mercury,iron and arsenic associated with sedimented particles were observed during flood periods in the estuary of the Comoé,Bia and Tanoérivers.Cadmium fluxes associated with sedimentation particles were highest in the rainy season in the Bia and Comoéestuaries and in the flood season in the Tanoéestuary.Pearson’s correlation analysis and the enrichment factor showed that the trace metals were derived from anthropogenic activities such as mining and farming.In addition,contamination indices showed that sediment particles in the estuaries of the three rivers were severely contaminated with mercury.However,the results of potential human health risks associated with trace metals show that there is no probability of exposure of the community to harmful and carcinogenic effects through ingestion and dermal absorption of sediment particles.It is essential to integrate the information from this study into policy-and decision-making processes for better management of transboundary river water resources in coastal countries,particularly the Côte d’Ivoire.展开更多
Based on the minimum settling time （MST） theory and step-response analysis of the second order system in active switched capacitor （SC） networks, a novel clock feedthrough frequency compensation （CFFC） method fo...Based on the minimum settling time （MST） theory and step-response analysis of the second order system in active switched capacitor （SC） networks, a novel clock feedthrough frequency compensation （CFFC） method for a folded-cascode OTA is proposed. The damping factor r/is adjusted by using MOS capacitors to introduce clock feedthrough so that the OTA can obtain the MST state and thus achieve fast settling. Research results indicate that the settling time of the compensated OTA is reduced by 22.7% ;as the capacitor load varies from 0.5 to 2.5pF,the improved settling time increases approximately linearly from 3.62 to 4.46ns： for VGA application, fast settling can also be achieved by modifying the MOS capacitor value accordingly when the closed loop gain of the compensated OTA varies.展开更多
Goethite, a typical iron-containing monomineral in red mud, was synthesized under the simulated Bayer digestion condition during the alumina production. The effects of dissolved organic compounds including sodium ...Goethite, a typical iron-containing monomineral in red mud, was synthesized under the simulated Bayer digestion condition during the alumina production. The effects of dissolved organic compounds including sodium formate, sodium acetate, sodium oxalate, sodium salicylate and disodium phthalate on the settling performance of goethite slurries were studied. The settling performance of the slurries was also investigated with the addition of self-made hydroxamated polyacrylamide flocculant （HCPAM）. The adsorption mechanism of dissolved organic compounds on the goethite surfaces was studied by FT-IR and XPS, respectively. The results show that the addition of organic compounds lowers the settling performance of the slurries and a deterioration in settling performance is observed in the order of sodium oxalate 〉 sodium salicylate （~ disodium phthalate） 〉 sodium formate 〉 sodium acetate. Moreover, HCPAM can efficiently eliminate the negative effects of sodium formate, sodium acetate and sodium oxalate on the settling performance of the goethite slurries, but it can only partially improve the settling performance of the goethite slurries containing sodium salicylate or disodium phthalate. FT-IR and XPS results show that these organic compounds are chemically adsorbed on the goethite surface.展开更多
The relatively poor settling characteristics of particles produced in moving bed biofilm reactor(MBBR)outline the importance of developing a fundamental understanding of the characterization and settleability of MBBR-...The relatively poor settling characteristics of particles produced in moving bed biofilm reactor(MBBR)outline the importance of developing a fundamental understanding of the characterization and settleability of MBBR-produced solids.The influence of carrier geometric properties and different levels of biofilm thickness on biofilm characteristics,solids production,particle size distribution(PSD),and particle settling velocity distribution(PSVD)is evaluated in this study.The analytical Vi CAs method is applied to the MBBR effluent to assess the distribution of particle settling velocities.This method is combined with microscopy imaging to relate particle size distribution to settling velocity.Three conventionally loaded MBBR systems are studied at a similar loading rate of 6.0 g/(m^(2)·day)and with different carrier types.The AnoxK^(TM)K5 carrier,a commonly used carrier,is compared to so-called thickness-restraint carriers,AnoxK^(TM)Z-carriers that are newly designed carriers to limit the biofilm thickness.Moreover,two levels of biofilm thickness,200μm and 400μm,are studied using AnoxK^(TM)Z-200 and Z-400 carriers.Statistical analysis confirms that K5 carriers demonstrated a significantly different biofilm mass,thickness,and density,in addition to distinct trends in PSD and PSVD in comparison with Z-carriers.However,in comparison of thickness-restraint carriers,Z-200 carrier results did not vary significantly compared to the Z-400 carrier.The K5 carriers showed the lowest production of suspended solids(0.7±0.3 gTSS/day),thickest biofilm(281.1±8.7μm)and lowest biofilm density(65.0±1.5 kg/m^(3)).The K5 effluent solids also showed enhanced settling behaviour,consisting of larger particles with faster settling velocities.展开更多
The settling of sediments is an accelerative process in which the concentration of the main sediments zone will heavily influence settling velocity,but the explicit relationship between the concentration and settling ...The settling of sediments is an accelerative process in which the concentration of the main sediments zone will heavily influence settling velocity,but the explicit relationship between the concentration and settling velocity has not been reported in literature. Here a theoretical function was built for the time dependent concentration and time dependent settling velocity of sediments;then the entire settling process reflecting concentration was shown on the basis of sediments instant\|settlement theory and mathematical method. Agreement of computed results and experimental data was found. Several governing parameters,including particle size,particle density,initial suspended sediments concentration and suspension height,were discussed with a series of calculated velocity curves. The research indicated that ⑴ the presented concentration\|velocity time relationship is rational,⑵ settling process of the sediments group with variation of concentration consists of acceleration stage,uniform motion stage and deceleration stage,and ⑶ particle size,particle density and initial suspended sediments concentration have more influence on the settling velocity than the suspension height and water temperature.展开更多
Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with populati...Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with population balance model (PBM), computational fluid dynamics (CFD) was used to study the characteristics, namely particle size distribution (PSD) and underflow concentration in DCT. Based on actual production, the effects of rake rotational speed, feed rate and tailings slurry concentration were simulated and analyzed in a certain range. The PSD varied with rake rational speed, feed rate and tailings slurry concentration almost in the same trend, but the influence of feed rate was less than that of rake rational speed and tailings slurry concentration. The underflow concentration increased at first and then declined with rake rational speed and feed rate, but it rose and fell with the tailings slurry concentration. Finally, the optimal key parameters on the flocculation settling and thickening of the whole-tailings in DCT were obtained: rake rotational speed of 17 r/min, feed rate of 3.25 m^3/h and tailings slurry concentration of 20%, giving the reference values to the industrial production in Baishitamu Copper Mine.展开更多
The mature fine oil sand tailings(MFT) remain as slurry in the tailings pond for long time. The dewatering and consolidation of MFT for sustainable management is an important task for the mining industry. The objectiv...The mature fine oil sand tailings(MFT) remain as slurry in the tailings pond for long time. The dewatering and consolidation of MFT for sustainable management is an important task for the mining industry. The objective of this study is to accelerate electrokinetic settling of MFT solids in suspensions in presence of optimal coagulant. In the first phase, optimal coagulant and coagulant dosage for settling of suspension are identified, i.e., ferric chloride at 350 mg/L. It is found that the chemical treatment is not much effective; the final solid content of the sediment is only 6.48% from an initial of 5%. In the second phase,combined coagulation and electrokinetic treatment is carried out to enhance the settling effect. The direct electric current is applied in continuous and intermittent modes on MFT suspensions placed in electrokinetic cell. The results show the final solid content reaches 23.74% under the combined application of350 mg/L ferric chloride and 218.75 V/m applied voltage gradient in the continuous mode. The intermittent current mode with 40% save in power consumption produces a settled sediment having 20.84% final solid content.展开更多
Based on the general relationship described by Cheng between the drag coefficient and the Reynolds number of a particle, a new relationship between the Reynolds number and a dimensionless particle parameter is propose...Based on the general relationship described by Cheng between the drag coefficient and the Reynolds number of a particle, a new relationship between the Reynolds number and a dimensionless particle parameter is proposed. Using a trial-and-error procedure to minimize errors, the coefficients were determined and a formula was developed for predicting the settling velocity of natural sediment particles. This formula has higher prediction accuracy than other published formulas and it is applicable to all Reynolds numbers less than 2× 10^5.展开更多
The volume change and shear strength behaviour of tailings slurry with the changes in gravimetric moisture content is important to effectively utilise the storage volume and analysis of dam failure potential.Consolida...The volume change and shear strength behaviour of tailings slurry with the changes in gravimetric moisture content is important to effectively utilise the storage volume and analysis of dam failure potential.Consolidation testing of tailings from a slurry-like to soil-like state is a critical task,and conventional consolidation apparatus does not have the capability of doing such testing,as the tailings slurries contain high water content.Settling tests conducted on slurries having a 25%solids concentration showed very low efficiency;final sediment was still slurry-like.An intrinsic point was identified based on pore water pressure dissipation during consolidation tests in a slurry consolidometer that can define two states of the tailings i.e.slurry-like and soil-like.In the slurry-like state,the volume change was greater for Slurry 2 than Slurry 1,while the inverse was observed in the soil-like state.The evolution of peak vane shear strength with the changes in moisture content was almost similar for both samples and obeyed the power function.Regression models have been developed and validated to predict the shear strength of materials at any gravimetric moisture content or void ratio.展开更多
Settling characteristics of floes, including relative settling velocity, relative flocculation coefficient and flocculation exponent, are obtained by the suspended load equations for different size fractions. Data of ...Settling characteristics of floes, including relative settling velocity, relative flocculation coefficient and flocculation exponent, are obtained by the suspended load equations for different size fractions. Data of the Changjiang Estuary suggest that level of flocculation changes from river section, river mouth (turbidity maximum) to offshore area in sequence of low, very high and high. The settling characteristics of floes reflected by in situ estimation performs a similar feature as that obtained from still water experiment.展开更多
Hydration grossular and hematite monominerals were synthesized. The effects of dissolved organic compounds(including sodium formate, sodium acetate, sodium oxalate, sodium salicylate or disodium phthalate) on the sett...Hydration grossular and hematite monominerals were synthesized. The effects of dissolved organic compounds(including sodium formate, sodium acetate, sodium oxalate, sodium salicylate or disodium phthalate) on the settling performance of hydration grossular or hematite slurries were studied. The settling of the slurries was also investigated with the addition of sodium polyacrylate(PAAS) or hydroxamated polyacrylamide flocculant(HCPAM). The adsorption mechanism of organic compounds on monominerals surfaces was studied by FT-IR and XPS, respectively. A deterioration in settling is observed in order of disodium phthalate>sodium salicylate>sodium oxalate>sodium formate(or sodium acetate). Moreover, PAAS can efficiently eliminate the negative effects of organic compounds on the settling performance of the hydration grossular slurry. HCPAM can efficiently eliminate the negative effects of sodium formate, sodium acetate and sodium oxalate on the settling performance of the hematite slurry, but it only partially improves the settling performance of hematite slurry containing sodium salicylate or disodium phthalate. FT-IR and XPS results show that organic compounds are physically adsorbed on hydration grossular surface, and chemisorptions of organic compounds occur on hematite surface with a bidentate chelating complex.展开更多
In coastal environments, fine-grain sediments often aggregate into large and porous flocs. ElectroMagnetic Current Meters （EMCM） and Laser In Situ Scattering and Transmissometry （LISST-ST） have been deployed withi...In coastal environments, fine-grain sediments often aggregate into large and porous flocs. ElectroMagnetic Current Meters （EMCM） and Laser In Situ Scattering and Transmissometry （LISST-ST） have been deployed within a Spartina alterniflora marsh of the Luoyuan Bay in Fujian Province, China, to measure the current velocity, the floc size and the settling velocity between 15 and 22 January 2008. During the observations, the near-bed water was collected in order to obtain the suspended sediment concentration （SSC） and constituent grain size. Data show that： （1） the nearbed current velocities vary from 0.1 to 5.6 cm/s in the central Spartina alterniflora marsh and 0.1–12.5 cm/s at the edge; （2） the SSCs vary from 47 to 188 mg/dm 3 . The mean grain size of constituent grains varies from 7.0 to 9.6 μm, and the mean floc sizes （MFS） vary from 30.4 to 69.4 μm. The relationship between the mean floc size and settling velocity can be described as： w s =ad b , in which w s is the floc settling velocity （mm/s）, a and b are coefficients. The floc settling velocity varies from 0.17 to 0.32 mm/s, with a mean value of 0.26 mm/s, and the floc settling velocity during the flood tide is higher than that during the ebb tide. The current velocity and the SSC are the main factors controlling the flocculation processes and the floc settling velocity.展开更多
Efficient thickening of tailings is a prerequisite for the metal mine tailings backfill and surface disposal operation.The effective collision of ultrafine tailings particles in suspension with flocculant molecules is...Efficient thickening of tailings is a prerequisite for the metal mine tailings backfill and surface disposal operation.The effective collision of ultrafine tailings particles in suspension with flocculant molecules is essential for flocs aggregates formation and settling.Unreasonable feeding speed and flocculant adding method will lead to the failure of effective dispersion of flocculant and high particle content in thickener overflow.In this work,the effect of turbulence intensity and flocculant adding method on floc size,strength,and movement characteristics are analysed.Aiming to solve the turbidity increased,a pilot-scale continuous thickening test was carried out.Taking a single particle and multiple flocs of full tailings as the research object,the particle iterative settlement model of flocs was established.The influence of turbulence intensity on collision effect is studied by tracking and simulating particle trajectory.The results show that in the process of single particle settlement,chaos appears in the iterative process owing to particle adhesion which caused by micro action.When the turbulence intensity is 25.99%,the maximum particle size of tailings floc is 6.21 mm and the maximum sedimentation rate is 5.284 cm·s^(−1).The tailings floc presents a multi-scale structure of particle-force chain system when hindered settling,and the interweaving of strong and weak force chains constitutes the topological structure of particles.The results are applied to a thicker in plant,the flocculant addition mode and feed rate are optimized,and the flocs settling speed and overflow clarity are improved.展开更多
Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 ...Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 at 50 ℃for 12 h）. The hydroxamate groups of HPAM were verified by Fourier transform infrared spectrum（FT-IR）. 46%（molar fration） hydroxamate groups and 23%（molar fraction） carbonyl groups on HPAM were determined by conductometric titration combined with Kjeldahl＇s microanalysis method. The settling performance achieved at different flocculant dosages was investigated with high goethite-containing red mud slurry of simulated Bayer process synthesized in laboratory. It turns out that the settling performance of high goethite-containing red mud was better with HPAM. The average settling rate of red mud in the first 5 min and the turbidity of supernatant after settling for 30 min are 2.36 m/h and 507 NTU, respectively, at a flocculant dosage of 120 g/t, which is similar to that achieved with Hx-600.展开更多
Rapid dewatering and thickening of whole-tailings with ultrafine particles is one of the most important processes for the whole-tailings paste preparation. Deep-cone thickener, a kind of such process for the flocculat...Rapid dewatering and thickening of whole-tailings with ultrafine particles is one of the most important processes for the whole-tailings paste preparation. Deep-cone thickener, a kind of such process for the flocculation and settling of whole-tailings, is particularly necessary to study. However, there exist many problems in observing the flocculation and settling process of whole-tailings, as well as the particle size distribution(PSD) of whole-tailings floccules in deep-cone thickener. Population balance model(PBM) is applied to predict the PSD in deep-cone thickener, and LUO model and GHADIRI model are employed to study the aggregation and fragmentation mechanism of the whole-tailings particles, respectively. Through three-dimensional numerical simulation on the whole-tailings flocculation and settling in deep-cone thickener using computational fluid dynamics(CFD)-PBM, the distribution of density and turbulent kinetic energy in deep-cone thickener were obtained, at the same time the spatio-temporal changes of whole-tailings floccules particle size distribution are analyzed. Finally, the major flocculation position in deep-cone thickener is found and the flocculation settling rules of whole-tailings are achieved.展开更多
In this study,ultrafine HfB_(2) powders with low oxygen were synthesized by a flocculating settling process which yielded ceramic precursors and subsequent carbo/borothermal reduction of the precursors.The liquid phas...In this study,ultrafine HfB_(2) powders with low oxygen were synthesized by a flocculating settling process which yielded ceramic precursors and subsequent carbo/borothermal reduction of the precursors.The liquid phase precursor method can achieve uniform mixing of components at the molecular level through multiple complexation reactions,and then realize the carbo/borothermal reduction reaction at a lower temperature to obtain ultrapure HfB2 powders.The as-resulted quasi-spherical HfB2 powders under the optimum conditions(atomic molar ratio M:B:C=1:2.8:10)calcined at 1500°C for 1 h have an average particle size of 205 nm and an oxygen content of 0.097 wt.%.Detailed analysis of the phase evolution of precursors shows that the formation of HfB2 particles is a mass diffusion mode from the external to internal HfO_(2)cores.We reveal that below 1300°C,HfC is not an intermediate product of HfB2 powder during the transition of precursors.Instead,HfC was formed as a by-product at high temperatures in the carbo/borothermal reduction process.The proposed formation mechanism of HfB_(2) is completely different from the traditional two-step transformation method.After the sintering of the ultrafine powders,the HfB_(2) ceramics show a relative density of 96.1%and superior mechanical properties compared to other works.Furthermore,by simply replacing the initial metal source,chlorinated group IV and V transitional metals(Ti,Zr,Ta,Nb)can also convert into high-purity and ultrafine diborides.This work shows that flocculating settling assisted carbo/borothermal reduction has potential in lot size production of various high-purity and ultrafine boride powders.展开更多
Understanding the aggregation and deposition behavior of carbon nanotubes （CNTs） is of great significance in terms of their fate and transport in the environment. Attachment efficiency is a widely used index for wel...Understanding the aggregation and deposition behavior of carbon nanotubes （CNTs） is of great significance in terms of their fate and transport in the environment. Attachment efficiency is a widely used index for well-dispersed CNT solutions. However, in natural waters, CNTs are usually heterogeneous in particle size. The attachment efficiency method is not applicable to such systems. Describing the dispersion stability of CNTs in natural aquatic systems is still a challenge. In this work, a settling curve modeling （SCM） method was developed for the description of the aggregation and deposition behavior of CNTs in aqueous solutions. The effects of water chemistry （natural organic matter, pH, and ionic strength） on the aggregation and deposition behavior of pristine and surface-functionalized multi-walled carbon nanotubes （MWCNTs） were systematically studied to evaluate the reliability of the SCM method. The results showed that, as compared to particle size and optical density, the centrifugal sedimentation rate constant （ks） from the settling curve profile is a practical, useful and reliable index for the description of heterogeneous CNT suspensions. The SCM method was successfully applied to MWCNT in three natural waters. The constituents in water, especially organic matter, determine the dispersion stability of MWCNTs in natural water bodies.展开更多
As water-based extraction technologies for producing bitumen from oil sands have received increasing environmental concerns,developing non-aqueous extraction(NAE)technique is of both fundamental and practical importan...As water-based extraction technologies for producing bitumen from oil sands have received increasing environmental concerns,developing non-aqueous extraction(NAE)technique is of both fundamental and practical importance.However,the relatively high concentration of fine solids trapped in the extracted bitumen presents an obstacle for pipeline transport as well as upgrading and refining downstream.This research attempts to provide a solution to fine solids removal without using synthetic additives or affecting bitumen recovery from NAE process.Herein,naturally hydrophilic additives(i.e.,water and high molecular weight guar gum(HGG)produced from Cyamopsiste tragonolobuosr L.Taup.)were introduced to promote the settling of fine solids suspended in bitumen-solvent solution,and the effects of solvents(i.e.,toluene,cyclohexane and their mixtures)were systematically investigated.Aggregate size distribution analyzed by the focused beam reflectance measurements confirmed that the addition of water and HGG could promote the agglomeration and settling of fine solids in all solvents studied.However,the size range and quantity of the agglomerates vary significantly with the solvent's aromatic character.Solvent mixtures demonstrate a superior performance on removing fine solids from bitumen over single solvent.Specifically,in a 3:2 toluene/cyclohexane mixture,the solid content was lowered from 0.66 wt%to 0.09 wt%.展开更多
In oil and gas well drilling operations,it is of great significance to accurately predict the drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids.In this paper,the free-falling of...In oil and gas well drilling operations,it is of great significance to accurately predict the drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids.In this paper,the free-falling of 172 groups of spheres and 522 groups of irregular-shaped sand particles in Newtonian/non-Newtonian fluids were investigated experimentally.It was found that the drag coefficient calculated based on Newtonian correlations can result in a significant error when the particle settles in the non-Newtonian fluid.Therefore,predictive models of drag coefficient were established respectively for different types of fluids.The validity of the proposed drag coefficient model of spheres was verified by comparing it with the previous works.On this basis,the drag coefficient model of irregular-shaped sand particles was established by introducing a shape factor.The models do not use the shape factor that requires detailed threedimensional shape and size information.Instead,two-dimensional geometric information(circularity)is obtained via image analysis techniques.The present new models predict the settling velocity of sand particles in the power-law fluid and Herschel-Bulkley fluid accurately with a mean relative error of5.03%and 6.74%,respectively,which verifies the accuracy of the model.展开更多
基金Supported by the National Key Research and Development Program of China(No.2022 YFC 3202700)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX 24_0904)。
文摘Inexpensive flocculant-modified iron tailings sand(ITS)were converted into effective flocculation materials for cyanobacteria blooms.After composite modification with polyaluminum chloride(PAC)and polyacrylamide(PAM),the surface charge of ITS was altered from negative to positive,and surface adhesion was increased by~1.5 times.PAC/PAM-modified ITS(PP-ITS)had strong flocculating effects on cyanobacteria,facilitating their removal.When the dosage of PP-ITS was 150 mg/L and the ratio of flocculant to ITS was 1:20,the elimination rate of cyanobacteria was as high as 90%.The flocs formed were better than those with chitosan-modified clays(CS-CA)and PAC-modified ITS(PAC-ITS)in terms of settling velocity,size,and recovery ability.The positively charged groups in the flocculant,such as-NH_(2) and Al^(3+),are attracted to negatively charged ions on the surface of ITS,altering the surface charge.Additionally,hydrogen bonds could form between amide side groups,and surface adhesion was improved through molecular association.Coupled with the strong bridging and sweeping effects of the flocculant,the flocs generated by PP-ITS formed rapidly and were large and resilient.The use of PP-ITS could effectively treat cyanobacteria blooms as well as solve the problem of ore tailings disposal.These results are of practical importance for engineering strategies to control cyanobacteria blooms,though there are still some issues that need to be addressed,such as how cyanobacteria flocs are collected and utilized after settling.
文摘Pollution of transboundary rivers can result from anthropogenic activities in their watersheds.In this study,sediment traps were deployed to determine the fluxes,concentrations,and health risks associated with arsenic,cadmium,mercury,lead,and iron in the estuaries of three transboundary rivers(Comoé,Bia,and Tanoé)in West Africa.Thus,the analysis of metal-associated sedimentation particle samples collected in rainy,flood,and dry seasons was required.Sediment traps were used to calculate the metal fluxes associated with sedimentation particles towards the Atlantic Ocean.Finally,the carcinogenic and non-carcinogenic risks of ingestion and dermal contact associated with sedimentation particles were assessed.The results showed that the total concentrations of trace metals in particulate matter were higher than in the UCC(Upper Crust Continental),with the exception of lead.The highest fluxes of lead,mercury,iron and arsenic associated with sedimented particles were observed during flood periods in the estuary of the Comoé,Bia and Tanoérivers.Cadmium fluxes associated with sedimentation particles were highest in the rainy season in the Bia and Comoéestuaries and in the flood season in the Tanoéestuary.Pearson’s correlation analysis and the enrichment factor showed that the trace metals were derived from anthropogenic activities such as mining and farming.In addition,contamination indices showed that sediment particles in the estuaries of the three rivers were severely contaminated with mercury.However,the results of potential human health risks associated with trace metals show that there is no probability of exposure of the community to harmful and carcinogenic effects through ingestion and dermal absorption of sediment particles.It is essential to integrate the information from this study into policy-and decision-making processes for better management of transboundary river water resources in coastal countries,particularly the Côte d’Ivoire.
文摘Based on the minimum settling time （MST） theory and step-response analysis of the second order system in active switched capacitor （SC） networks, a novel clock feedthrough frequency compensation （CFFC） method for a folded-cascode OTA is proposed. The damping factor r/is adjusted by using MOS capacitors to introduce clock feedthrough so that the OTA can obtain the MST state and thus achieve fast settling. Research results indicate that the settling time of the compensated OTA is reduced by 22.7% ;as the capacitor load varies from 0.5 to 2.5pF,the improved settling time increases approximately linearly from 3.62 to 4.46ns： for VGA application, fast settling can also be achieved by modifying the MOS capacitor value accordingly when the closed loop gain of the compensated OTA varies.
基金Projects(51174231,51134007)supported by the National Natural Science Foundation of China
文摘Goethite, a typical iron-containing monomineral in red mud, was synthesized under the simulated Bayer digestion condition during the alumina production. The effects of dissolved organic compounds including sodium formate, sodium acetate, sodium oxalate, sodium salicylate and disodium phthalate on the settling performance of goethite slurries were studied. The settling performance of the slurries was also investigated with the addition of self-made hydroxamated polyacrylamide flocculant （HCPAM）. The adsorption mechanism of dissolved organic compounds on the goethite surfaces was studied by FT-IR and XPS, respectively. The results show that the addition of organic compounds lowers the settling performance of the slurries and a deterioration in settling performance is observed in the order of sodium oxalate 〉 sodium salicylate （~ disodium phthalate） 〉 sodium formate 〉 sodium acetate. Moreover, HCPAM can efficiently eliminate the negative effects of sodium formate, sodium acetate and sodium oxalate on the settling performance of the goethite slurries, but it can only partially improve the settling performance of the goethite slurries containing sodium salicylate or disodium phthalate. FT-IR and XPS results show that these organic compounds are chemically adsorbed on the goethite surface.
文摘The relatively poor settling characteristics of particles produced in moving bed biofilm reactor(MBBR)outline the importance of developing a fundamental understanding of the characterization and settleability of MBBR-produced solids.The influence of carrier geometric properties and different levels of biofilm thickness on biofilm characteristics,solids production,particle size distribution(PSD),and particle settling velocity distribution(PSVD)is evaluated in this study.The analytical Vi CAs method is applied to the MBBR effluent to assess the distribution of particle settling velocities.This method is combined with microscopy imaging to relate particle size distribution to settling velocity.Three conventionally loaded MBBR systems are studied at a similar loading rate of 6.0 g/(m^(2)·day)and with different carrier types.The AnoxK^(TM)K5 carrier,a commonly used carrier,is compared to so-called thickness-restraint carriers,AnoxK^(TM)Z-carriers that are newly designed carriers to limit the biofilm thickness.Moreover,two levels of biofilm thickness,200μm and 400μm,are studied using AnoxK^(TM)Z-200 and Z-400 carriers.Statistical analysis confirms that K5 carriers demonstrated a significantly different biofilm mass,thickness,and density,in addition to distinct trends in PSD and PSVD in comparison with Z-carriers.However,in comparison of thickness-restraint carriers,Z-200 carrier results did not vary significantly compared to the Z-400 carrier.The K5 carriers showed the lowest production of suspended solids(0.7±0.3 gTSS/day),thickest biofilm(281.1±8.7μm)and lowest biofilm density(65.0±1.5 kg/m^(3)).The K5 effluent solids also showed enhanced settling behaviour,consisting of larger particles with faster settling velocities.
文摘The settling of sediments is an accelerative process in which the concentration of the main sediments zone will heavily influence settling velocity,but the explicit relationship between the concentration and settling velocity has not been reported in literature. Here a theoretical function was built for the time dependent concentration and time dependent settling velocity of sediments;then the entire settling process reflecting concentration was shown on the basis of sediments instant\|settlement theory and mathematical method. Agreement of computed results and experimental data was found. Several governing parameters,including particle size,particle density,initial suspended sediments concentration and suspension height,were discussed with a series of calculated velocity curves. The research indicated that ⑴ the presented concentration\|velocity time relationship is rational,⑵ settling process of the sediments group with variation of concentration consists of acceleration stage,uniform motion stage and deceleration stage,and ⑶ particle size,particle density and initial suspended sediments concentration have more influence on the settling velocity than the suspension height and water temperature.
基金Project(2016YFC0600709)supported by the National Key R&D Program of ChinaProjects(51574013,51774039)supported by the National Natural Science Foundation of ChinaProject(FRF-TP-17-024A1)supported by the Fundamental Research Funds for the Central Universities,China
文摘Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with population balance model (PBM), computational fluid dynamics (CFD) was used to study the characteristics, namely particle size distribution (PSD) and underflow concentration in DCT. Based on actual production, the effects of rake rotational speed, feed rate and tailings slurry concentration were simulated and analyzed in a certain range. The PSD varied with rake rational speed, feed rate and tailings slurry concentration almost in the same trend, but the influence of feed rate was less than that of rake rational speed and tailings slurry concentration. The underflow concentration increased at first and then declined with rake rational speed and feed rate, but it rose and fell with the tailings slurry concentration. Finally, the optimal key parameters on the flocculation settling and thickening of the whole-tailings in DCT were obtained: rake rotational speed of 17 r/min, feed rate of 3.25 m^3/h and tailings slurry concentration of 20%, giving the reference values to the industrial production in Baishitamu Copper Mine.
基金the support of The University of Western Ontario and the Natural Science and Engineering Research Council of Canada (NSERC)
文摘The mature fine oil sand tailings(MFT) remain as slurry in the tailings pond for long time. The dewatering and consolidation of MFT for sustainable management is an important task for the mining industry. The objective of this study is to accelerate electrokinetic settling of MFT solids in suspensions in presence of optimal coagulant. In the first phase, optimal coagulant and coagulant dosage for settling of suspension are identified, i.e., ferric chloride at 350 mg/L. It is found that the chemical treatment is not much effective; the final solid content of the sediment is only 6.48% from an initial of 5%. In the second phase,combined coagulation and electrokinetic treatment is carried out to enhance the settling effect. The direct electric current is applied in continuous and intermittent modes on MFT suspensions placed in electrokinetic cell. The results show the final solid content reaches 23.74% under the combined application of350 mg/L ferric chloride and 218.75 V/m applied voltage gradient in the continuous mode. The intermittent current mode with 40% save in power consumption produces a settled sediment having 20.84% final solid content.
基金supported by the National Natural Science Foundation of China (Grant No. 40476039)
文摘Based on the general relationship described by Cheng between the drag coefficient and the Reynolds number of a particle, a new relationship between the Reynolds number and a dimensionless particle parameter is proposed. Using a trial-and-error procedure to minimize errors, the coefficients were determined and a formula was developed for predicting the settling velocity of natural sediment particles. This formula has higher prediction accuracy than other published formulas and it is applicable to all Reynolds numbers less than 2× 10^5.
文摘The volume change and shear strength behaviour of tailings slurry with the changes in gravimetric moisture content is important to effectively utilise the storage volume and analysis of dam failure potential.Consolidation testing of tailings from a slurry-like to soil-like state is a critical task,and conventional consolidation apparatus does not have the capability of doing such testing,as the tailings slurries contain high water content.Settling tests conducted on slurries having a 25%solids concentration showed very low efficiency;final sediment was still slurry-like.An intrinsic point was identified based on pore water pressure dissipation during consolidation tests in a slurry consolidometer that can define two states of the tailings i.e.slurry-like and soil-like.In the slurry-like state,the volume change was greater for Slurry 2 than Slurry 1,while the inverse was observed in the soil-like state.The evolution of peak vane shear strength with the changes in moisture content was almost similar for both samples and obeyed the power function.Regression models have been developed and validated to predict the shear strength of materials at any gravimetric moisture content or void ratio.
文摘Settling characteristics of floes, including relative settling velocity, relative flocculation coefficient and flocculation exponent, are obtained by the suspended load equations for different size fractions. Data of the Changjiang Estuary suggest that level of flocculation changes from river section, river mouth (turbidity maximum) to offshore area in sequence of low, very high and high. The settling characteristics of floes reflected by in situ estimation performs a similar feature as that obtained from still water experiment.
基金Project(51174231)supported by the National Natural Science Foundation of China
文摘Hydration grossular and hematite monominerals were synthesized. The effects of dissolved organic compounds(including sodium formate, sodium acetate, sodium oxalate, sodium salicylate or disodium phthalate) on the settling performance of hydration grossular or hematite slurries were studied. The settling of the slurries was also investigated with the addition of sodium polyacrylate(PAAS) or hydroxamated polyacrylamide flocculant(HCPAM). The adsorption mechanism of organic compounds on monominerals surfaces was studied by FT-IR and XPS, respectively. A deterioration in settling is observed in order of disodium phthalate>sodium salicylate>sodium oxalate>sodium formate(or sodium acetate). Moreover, PAAS can efficiently eliminate the negative effects of organic compounds on the settling performance of the hydration grossular slurry. HCPAM can efficiently eliminate the negative effects of sodium formate, sodium acetate and sodium oxalate on the settling performance of the hematite slurry, but it only partially improves the settling performance of hematite slurry containing sodium salicylate or disodium phthalate. FT-IR and XPS results show that organic compounds are physically adsorbed on hydration grossular surface, and chemisorptions of organic compounds occur on hematite surface with a bidentate chelating complex.
基金The National Natural Science Foundation of China under contract No. 40606012the Scientific Research Foundation of Third Institute of Oceanography, State Oceanic Administration under contract No. 2009015
文摘In coastal environments, fine-grain sediments often aggregate into large and porous flocs. ElectroMagnetic Current Meters （EMCM） and Laser In Situ Scattering and Transmissometry （LISST-ST） have been deployed within a Spartina alterniflora marsh of the Luoyuan Bay in Fujian Province, China, to measure the current velocity, the floc size and the settling velocity between 15 and 22 January 2008. During the observations, the near-bed water was collected in order to obtain the suspended sediment concentration （SSC） and constituent grain size. Data show that： （1） the nearbed current velocities vary from 0.1 to 5.6 cm/s in the central Spartina alterniflora marsh and 0.1–12.5 cm/s at the edge; （2） the SSCs vary from 47 to 188 mg/dm 3 . The mean grain size of constituent grains varies from 7.0 to 9.6 μm, and the mean floc sizes （MFS） vary from 30.4 to 69.4 μm. The relationship between the mean floc size and settling velocity can be described as： w s =ad b , in which w s is the floc settling velocity （mm/s）, a and b are coefficients. The floc settling velocity varies from 0.17 to 0.32 mm/s, with a mean value of 0.26 mm/s, and the floc settling velocity during the flood tide is higher than that during the ebb tide. The current velocity and the SSC are the main factors controlling the flocculation processes and the floc settling velocity.
基金funded by the National Natural Science Foundation of China (No. 51834001)
文摘Efficient thickening of tailings is a prerequisite for the metal mine tailings backfill and surface disposal operation.The effective collision of ultrafine tailings particles in suspension with flocculant molecules is essential for flocs aggregates formation and settling.Unreasonable feeding speed and flocculant adding method will lead to the failure of effective dispersion of flocculant and high particle content in thickener overflow.In this work,the effect of turbulence intensity and flocculant adding method on floc size,strength,and movement characteristics are analysed.Aiming to solve the turbidity increased,a pilot-scale continuous thickening test was carried out.Taking a single particle and multiple flocs of full tailings as the research object,the particle iterative settlement model of flocs was established.The influence of turbulence intensity on collision effect is studied by tracking and simulating particle trajectory.The results show that in the process of single particle settlement,chaos appears in the iterative process owing to particle adhesion which caused by micro action.When the turbulence intensity is 25.99%,the maximum particle size of tailings floc is 6.21 mm and the maximum sedimentation rate is 5.284 cm·s^(−1).The tailings floc presents a multi-scale structure of particle-force chain system when hindered settling,and the interweaving of strong and weak force chains constitutes the topological structure of particles.The results are applied to a thicker in plant,the flocculant addition mode and feed rate are optimized,and the flocs settling speed and overflow clarity are improved.
基金Project(51174231)supported by the National Natural Science Foundation of China
文摘Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 at 50 ℃for 12 h）. The hydroxamate groups of HPAM were verified by Fourier transform infrared spectrum（FT-IR）. 46%（molar fration） hydroxamate groups and 23%（molar fraction） carbonyl groups on HPAM were determined by conductometric titration combined with Kjeldahl＇s microanalysis method. The settling performance achieved at different flocculant dosages was investigated with high goethite-containing red mud slurry of simulated Bayer process synthesized in laboratory. It turns out that the settling performance of high goethite-containing red mud was better with HPAM. The average settling rate of red mud in the first 5 min and the turbidity of supernatant after settling for 30 min are 2.36 m/h and 507 NTU, respectively, at a flocculant dosage of 120 g/t, which is similar to that achieved with Hx-600.
基金Project(51174032)supported by the National Natural Science Foundation of ChinaProject(NCET-10-0225)supported by the Program for New Century Excellent Talents in University,ChinaProject(FRF-TP-09-001A)supported by the Fundamental Research Funds for the Central Universities,China
文摘Rapid dewatering and thickening of whole-tailings with ultrafine particles is one of the most important processes for the whole-tailings paste preparation. Deep-cone thickener, a kind of such process for the flocculation and settling of whole-tailings, is particularly necessary to study. However, there exist many problems in observing the flocculation and settling process of whole-tailings, as well as the particle size distribution(PSD) of whole-tailings floccules in deep-cone thickener. Population balance model(PBM) is applied to predict the PSD in deep-cone thickener, and LUO model and GHADIRI model are employed to study the aggregation and fragmentation mechanism of the whole-tailings particles, respectively. Through three-dimensional numerical simulation on the whole-tailings flocculation and settling in deep-cone thickener using computational fluid dynamics(CFD)-PBM, the distribution of density and turbulent kinetic energy in deep-cone thickener were obtained, at the same time the spatio-temporal changes of whole-tailings floccules particle size distribution are analyzed. Finally, the major flocculation position in deep-cone thickener is found and the flocculation settling rules of whole-tailings are achieved.
基金financially supported by the National Science Fund for Distinguished Young Scholars(No.51825103)the National Science Fund for Excellent Young Scholars(No.52222208)+1 种基金the Major science and technology project of Anhui Province(No.008192841048)the HFIPS Director's Fund,CAS(No.BJPY2021B04,YZJJ202202-CX,YZJJKX202202).
文摘In this study,ultrafine HfB_(2) powders with low oxygen were synthesized by a flocculating settling process which yielded ceramic precursors and subsequent carbo/borothermal reduction of the precursors.The liquid phase precursor method can achieve uniform mixing of components at the molecular level through multiple complexation reactions,and then realize the carbo/borothermal reduction reaction at a lower temperature to obtain ultrapure HfB2 powders.The as-resulted quasi-spherical HfB2 powders under the optimum conditions(atomic molar ratio M:B:C=1:2.8:10)calcined at 1500°C for 1 h have an average particle size of 205 nm and an oxygen content of 0.097 wt.%.Detailed analysis of the phase evolution of precursors shows that the formation of HfB2 particles is a mass diffusion mode from the external to internal HfO_(2)cores.We reveal that below 1300°C,HfC is not an intermediate product of HfB2 powder during the transition of precursors.Instead,HfC was formed as a by-product at high temperatures in the carbo/borothermal reduction process.The proposed formation mechanism of HfB_(2) is completely different from the traditional two-step transformation method.After the sintering of the ultrafine powders,the HfB_(2) ceramics show a relative density of 96.1%and superior mechanical properties compared to other works.Furthermore,by simply replacing the initial metal source,chlorinated group IV and V transitional metals(Ti,Zr,Ta,Nb)can also convert into high-purity and ultrafine diborides.This work shows that flocculating settling assisted carbo/borothermal reduction has potential in lot size production of various high-purity and ultrafine boride powders.
基金supported by National Natural Science Foundation of China (21107045)Natural Science Foundation of Jiangsu Province of China (BK2011575)the Program for New Century Excellent Talents in Universities of China (NCET-10-0489)
文摘Understanding the aggregation and deposition behavior of carbon nanotubes （CNTs） is of great significance in terms of their fate and transport in the environment. Attachment efficiency is a widely used index for well-dispersed CNT solutions. However, in natural waters, CNTs are usually heterogeneous in particle size. The attachment efficiency method is not applicable to such systems. Describing the dispersion stability of CNTs in natural aquatic systems is still a challenge. In this work, a settling curve modeling （SCM） method was developed for the description of the aggregation and deposition behavior of CNTs in aqueous solutions. The effects of water chemistry （natural organic matter, pH, and ionic strength） on the aggregation and deposition behavior of pristine and surface-functionalized multi-walled carbon nanotubes （MWCNTs） were systematically studied to evaluate the reliability of the SCM method. The results showed that, as compared to particle size and optical density, the centrifugal sedimentation rate constant （ks） from the settling curve profile is a practical, useful and reliable index for the description of heterogeneous CNT suspensions. The SCM method was successfully applied to MWCNT in three natural waters. The constituents in water, especially organic matter, determine the dispersion stability of MWCNTs in natural water bodies.
基金financial support from Institute for Oil Sands Innovation(IOSI)Imperial Oil+3 种基金the Natural Sciences and Engineering Research Council of Canada(NSERC)the Canada Foundation for Innovation(CFI)the Future Energy Systems under the Canada First Research Excellence Fundthe Canada Research Chairs Program to the research work。
文摘As water-based extraction technologies for producing bitumen from oil sands have received increasing environmental concerns,developing non-aqueous extraction(NAE)technique is of both fundamental and practical importance.However,the relatively high concentration of fine solids trapped in the extracted bitumen presents an obstacle for pipeline transport as well as upgrading and refining downstream.This research attempts to provide a solution to fine solids removal without using synthetic additives or affecting bitumen recovery from NAE process.Herein,naturally hydrophilic additives(i.e.,water and high molecular weight guar gum(HGG)produced from Cyamopsiste tragonolobuosr L.Taup.)were introduced to promote the settling of fine solids suspended in bitumen-solvent solution,and the effects of solvents(i.e.,toluene,cyclohexane and their mixtures)were systematically investigated.Aggregate size distribution analyzed by the focused beam reflectance measurements confirmed that the addition of water and HGG could promote the agglomeration and settling of fine solids in all solvents studied.However,the size range and quantity of the agglomerates vary significantly with the solvent's aromatic character.Solvent mixtures demonstrate a superior performance on removing fine solids from bitumen over single solvent.Specifically,in a 3:2 toluene/cyclohexane mixture,the solid content was lowered from 0.66 wt%to 0.09 wt%.
基金financially supported by the National Natural Science Foundation of China(Grant no.51674087,51974090)the National Science and Technology Major Project of the Ministry of Science and Technology of China(grant number 2017ZX05009003)。
文摘In oil and gas well drilling operations,it is of great significance to accurately predict the drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids.In this paper,the free-falling of 172 groups of spheres and 522 groups of irregular-shaped sand particles in Newtonian/non-Newtonian fluids were investigated experimentally.It was found that the drag coefficient calculated based on Newtonian correlations can result in a significant error when the particle settles in the non-Newtonian fluid.Therefore,predictive models of drag coefficient were established respectively for different types of fluids.The validity of the proposed drag coefficient model of spheres was verified by comparing it with the previous works.On this basis,the drag coefficient model of irregular-shaped sand particles was established by introducing a shape factor.The models do not use the shape factor that requires detailed threedimensional shape and size information.Instead,two-dimensional geometric information(circularity)is obtained via image analysis techniques.The present new models predict the settling velocity of sand particles in the power-law fluid and Herschel-Bulkley fluid accurately with a mean relative error of5.03%and 6.74%,respectively,which verifies the accuracy of the model.
