A new method for quantity configuration of escalator linear profile in SAP system is proposed. This method is to create the calculation formula of the assembly length of escalator linear profile according to the chara...A new method for quantity configuration of escalator linear profile in SAP system is proposed. This method is to create the calculation formula of the assembly length of escalator linear profile according to the characteristic value of escalator, the requirements of assembly process and the technical specification of packaging and transportation,and then optimize the configuration method in SAP system. It avoids the waste caused by the SAP system configuration of 6 m long profile that needs to be cut to the actual length,which reduce the scrap rate of escalator assembly profiles. It provides an example to reduce manufacturing cost by improving the configuration in SAP system without change of assembly process.展开更多
This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw ...This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw resistance and durability of recycled concrete samples under varying freeze-thaw cycles.The results indicate that an appropriate addition of SAP significantly enhances the freeze-thaw resistance of recycled concrete.After 200 freeze-thaw cycles,the RS0.6 sample retained good surface integrity,demonstrating the best performance.Compared to NAC,its mass loss decreased by 1.16%,the relative dynamic modulus improved by 7.01%,and the compressive strength loss rate decreased by 5.41%.Additionally,T2 spectrum analysis revealed that adding SAP optimized the pore structure of recycled concrete and mitigated pore development during freeze-thaw cycles.As the number of freeze-thaw cycles increased,the RS0.3 and RS0.6 samples demonstrated superior frost resistance compared to NAC.However,an excessive amount of SAP increased pore expansion during subsequent freeze-thaw cycles,ultimately weakening frost resistance.展开更多
Objectives: To evaluate the various scoring systems, APACHE II, SOFA, SAPS II and MPM for the prediction of prognosis of the obstetric critically ill patients admitted in a well supported ICU unit. Material and method...Objectives: To evaluate the various scoring systems, APACHE II, SOFA, SAPS II and MPM for the prediction of prognosis of the obstetric critically ill patients admitted in a well supported ICU unit. Material and methods: A prospective, observational study was conducted among all the obstetric patients admitted to the ICU between October 2011 and December 2012, during a period of 15 months. The data collected were of three categories: demographic, obstetric and ICU related. Results and Analysis: The patients admitted in the postpartum period (n = 28, 53.84%) were more than the antenatal admissions (n = 24, 46.16%). 32.69% of admissions were in the third trimester. The most common mode of delivery was emergency caesarean section (n = 27/40, 67.5%). Total caesarean deliveries were 35/40 = 87.5% in ICU patients. The mortality prediction scores were calculated for 41 patients only as acid blood gas analysis was not available for the rest. Patients required ventilation—51.92%, hemodialysis—19.23%, inotropic support—38.46%, blood transfusion—50%. Analysis of the statistical data for ICU parameters has shown that hospital stay (p = 0.011) and ventilation days (p = 0.014) are significant predictors of maternal outcome. Age (p = 0.789), ICU stay (p = 0.701) and RRT (p = 0.632) are not significant. Among the obstetric ICU admissions, hypertensive disorders of pregnancy (30.76%) was the predominant cause followed by obstetric haemorrhage (23.07%). Discussion: HELLP syndrome and eclampsia (n = 4, 57%) were the major causes of maternal deaths with anaesthetic mishaps accounting for 29% (n = 2). One (14%) death was due to Eisenmenger’s syndrome. In one case of H1N1 admitted with ARDS, caesarean section was done in MICU for worsening respiratory distress. The maternal mortality in this series of cases was 7/52 = 13.46%, excluding the unavoidable cases of maternal death (3 cases brain dead at admission and one cardiac arrest in emergency room), our maternal mortality rate is 3/48 = 6.25%. The predicted mortality as measured by all scoring systems (for 41 patients) was between 17% and 30%. The observed mortality was around 17%. Hence a reduction in mortality of 40% has been achieved due to intensive care. Conclusions: Leading cause of maternal mortality was HELLP syndrome. Hypertensive disorders of pregnancy were the most common cause of admission to ICU. In this study, all the scores were equally significant in predicting maternal mortality. Amongst the interventions done for these patients mechanical ventilation seems to have an influence on the overall outcome.展开更多
In this paper, the addition of admixed superabsorbent polymer (SAP) improved the microstructure and durability-related properties in a cement-based system with supplementary materials. This is an important issue in re...In this paper, the addition of admixed superabsorbent polymer (SAP) improved the microstructure and durability-related properties in a cement-based system with supplementary materials. This is an important issue in real construction projects when good durability properties are required. This study investigates the effect of SAP on the systems using cement replacement by fly ash and silica fume considering the strength properties and durability properties of paste under sulfate attack of cement-based system. The replacement considered in the study was of 10% silica fume and 20% fly ash in each case, the dosage of SAP was 0.25% of the total amount of cementitious material. The results showed that the addition of SAP in the cement-based system improved the compressive strength and reduced expansion to sulfate attack. Scanning electron micrographs showed that utilization of fly ash with silica fume and silica fume with SAP resulted in a much denser microstructure, thereby, leading to an increase in compressive strength and lower expansion under sulfate attack.展开更多
近日,IBM宣布IBM Power Systems已通过SAP HANA企业云认证,成为大型SAP HANA系统的关键基础架构平台提供商,用以简化管理私有云环境的IT基础架构。这一服务将在基于IBM POWER9的IBM Power SystemsE980服务器上运行,助力SAP HANA数据库...近日,IBM宣布IBM Power Systems已通过SAP HANA企业云认证,成为大型SAP HANA系统的关键基础架构平台提供商,用以简化管理私有云环境的IT基础架构。这一服务将在基于IBM POWER9的IBM Power SystemsE980服务器上运行,助力SAP HANA数据库的虚拟服务器容量扩展至24TB,达到业界最高水平。SAP HANA Enterprise Cloud提供可扩展的安全云服务,旨在帮助用户加快转向云环境的进程。SAP HANA企业云具有跨软件和硬件堆栈的能力,可在同一个私有管理环境中提供一系列功能和技术服务,帮助客户实现本地控制。展开更多
The sap flow method is widely used to estimate forest transpiration.However,at the individual tree level it has spatiotemporal variations due to the impacts of environmental conditions and spatial relationships among ...The sap flow method is widely used to estimate forest transpiration.However,at the individual tree level it has spatiotemporal variations due to the impacts of environmental conditions and spatial relationships among trees.Therefore,an in-depth understanding of the coupling effects of these factors is important for designing sap flow measurement methods and performing accurate assessments of stand scale transpiration.This study is based on observations of sap flux density(SF_(d))of nine sample trees with different Hegyi’s competition indices(HCIs),soil moisture,and meteorological conditions in a pure plantation of Larix gmelinii var.principis-rupprechtii during the 2021 growing season(May to September).A multifactorial model of sap flow was developed and possible errors in the stand scale sap flow estimates associated with sample sizes were determined using model-based predictions of sap flow.Temporal variations are controlled by vapour pressure deficit(VPD),solar radiation(R),and soil moisture,and these relationships can be described by polynomial or saturated exponential functions.Spatial(individual)differences were influenced by the HCI,as shown by the decaying power function.A simple SF_(d)model at the individual tree level was developed to describe the synergistic influences of VPD,R,soil moisture,and HCI.The coefficient of variations(CV)of the sap flow estimates gradually stabilized when the sample size was>10;at least six sample trees were needed if the CV was within 10%.This study improves understanding of the mechanisms of spatiotemporal variations in sap flow at the individual tree level and provides a new methodology for determining the optimal sample size for sap flow measurements.展开更多
文摘A new method for quantity configuration of escalator linear profile in SAP system is proposed. This method is to create the calculation formula of the assembly length of escalator linear profile according to the characteristic value of escalator, the requirements of assembly process and the technical specification of packaging and transportation,and then optimize the configuration method in SAP system. It avoids the waste caused by the SAP system configuration of 6 m long profile that needs to be cut to the actual length,which reduce the scrap rate of escalator assembly profiles. It provides an example to reduce manufacturing cost by improving the configuration in SAP system without change of assembly process.
基金Funded by the Science and Technology Program of Gansu Province(Nos.25JRRA497,23ZDFA017)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB0950000)High-level Talent Funding of Kashi。
文摘This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw resistance and durability of recycled concrete samples under varying freeze-thaw cycles.The results indicate that an appropriate addition of SAP significantly enhances the freeze-thaw resistance of recycled concrete.After 200 freeze-thaw cycles,the RS0.6 sample retained good surface integrity,demonstrating the best performance.Compared to NAC,its mass loss decreased by 1.16%,the relative dynamic modulus improved by 7.01%,and the compressive strength loss rate decreased by 5.41%.Additionally,T2 spectrum analysis revealed that adding SAP optimized the pore structure of recycled concrete and mitigated pore development during freeze-thaw cycles.As the number of freeze-thaw cycles increased,the RS0.3 and RS0.6 samples demonstrated superior frost resistance compared to NAC.However,an excessive amount of SAP increased pore expansion during subsequent freeze-thaw cycles,ultimately weakening frost resistance.
文摘Objectives: To evaluate the various scoring systems, APACHE II, SOFA, SAPS II and MPM for the prediction of prognosis of the obstetric critically ill patients admitted in a well supported ICU unit. Material and methods: A prospective, observational study was conducted among all the obstetric patients admitted to the ICU between October 2011 and December 2012, during a period of 15 months. The data collected were of three categories: demographic, obstetric and ICU related. Results and Analysis: The patients admitted in the postpartum period (n = 28, 53.84%) were more than the antenatal admissions (n = 24, 46.16%). 32.69% of admissions were in the third trimester. The most common mode of delivery was emergency caesarean section (n = 27/40, 67.5%). Total caesarean deliveries were 35/40 = 87.5% in ICU patients. The mortality prediction scores were calculated for 41 patients only as acid blood gas analysis was not available for the rest. Patients required ventilation—51.92%, hemodialysis—19.23%, inotropic support—38.46%, blood transfusion—50%. Analysis of the statistical data for ICU parameters has shown that hospital stay (p = 0.011) and ventilation days (p = 0.014) are significant predictors of maternal outcome. Age (p = 0.789), ICU stay (p = 0.701) and RRT (p = 0.632) are not significant. Among the obstetric ICU admissions, hypertensive disorders of pregnancy (30.76%) was the predominant cause followed by obstetric haemorrhage (23.07%). Discussion: HELLP syndrome and eclampsia (n = 4, 57%) were the major causes of maternal deaths with anaesthetic mishaps accounting for 29% (n = 2). One (14%) death was due to Eisenmenger’s syndrome. In one case of H1N1 admitted with ARDS, caesarean section was done in MICU for worsening respiratory distress. The maternal mortality in this series of cases was 7/52 = 13.46%, excluding the unavoidable cases of maternal death (3 cases brain dead at admission and one cardiac arrest in emergency room), our maternal mortality rate is 3/48 = 6.25%. The predicted mortality as measured by all scoring systems (for 41 patients) was between 17% and 30%. The observed mortality was around 17%. Hence a reduction in mortality of 40% has been achieved due to intensive care. Conclusions: Leading cause of maternal mortality was HELLP syndrome. Hypertensive disorders of pregnancy were the most common cause of admission to ICU. In this study, all the scores were equally significant in predicting maternal mortality. Amongst the interventions done for these patients mechanical ventilation seems to have an influence on the overall outcome.
文摘In this paper, the addition of admixed superabsorbent polymer (SAP) improved the microstructure and durability-related properties in a cement-based system with supplementary materials. This is an important issue in real construction projects when good durability properties are required. This study investigates the effect of SAP on the systems using cement replacement by fly ash and silica fume considering the strength properties and durability properties of paste under sulfate attack of cement-based system. The replacement considered in the study was of 10% silica fume and 20% fly ash in each case, the dosage of SAP was 0.25% of the total amount of cementitious material. The results showed that the addition of SAP in the cement-based system improved the compressive strength and reduced expansion to sulfate attack. Scanning electron micrographs showed that utilization of fly ash with silica fume and silica fume with SAP resulted in a much denser microstructure, thereby, leading to an increase in compressive strength and lower expansion under sulfate attack.
文摘近日,IBM宣布IBM Power Systems已通过SAP HANA企业云认证,成为大型SAP HANA系统的关键基础架构平台提供商,用以简化管理私有云环境的IT基础架构。这一服务将在基于IBM POWER9的IBM Power SystemsE980服务器上运行,助力SAP HANA数据库的虚拟服务器容量扩展至24TB,达到业界最高水平。SAP HANA Enterprise Cloud提供可扩展的安全云服务,旨在帮助用户加快转向云环境的进程。SAP HANA企业云具有跨软件和硬件堆栈的能力,可在同一个私有管理环境中提供一系列功能和技术服务,帮助客户实现本地控制。
基金supported by the Fundamental Research Funds of the Chinese Academy of Forestry(CAFYBB2020QB004)the National Natural Science Foundation of China(41971038,32171559,U20A2085,and U21A2005).
文摘The sap flow method is widely used to estimate forest transpiration.However,at the individual tree level it has spatiotemporal variations due to the impacts of environmental conditions and spatial relationships among trees.Therefore,an in-depth understanding of the coupling effects of these factors is important for designing sap flow measurement methods and performing accurate assessments of stand scale transpiration.This study is based on observations of sap flux density(SF_(d))of nine sample trees with different Hegyi’s competition indices(HCIs),soil moisture,and meteorological conditions in a pure plantation of Larix gmelinii var.principis-rupprechtii during the 2021 growing season(May to September).A multifactorial model of sap flow was developed and possible errors in the stand scale sap flow estimates associated with sample sizes were determined using model-based predictions of sap flow.Temporal variations are controlled by vapour pressure deficit(VPD),solar radiation(R),and soil moisture,and these relationships can be described by polynomial or saturated exponential functions.Spatial(individual)differences were influenced by the HCI,as shown by the decaying power function.A simple SF_(d)model at the individual tree level was developed to describe the synergistic influences of VPD,R,soil moisture,and HCI.The coefficient of variations(CV)of the sap flow estimates gradually stabilized when the sample size was>10;at least six sample trees were needed if the CV was within 10%.This study improves understanding of the mechanisms of spatiotemporal variations in sap flow at the individual tree level and provides a new methodology for determining the optimal sample size for sap flow measurements.
