A detailed understanding of seismicity originating from the Nanga Parbat syntaxis in the northwestern Himalaya is crucial for characterizing the active fault systems and associated neotectonic processes in the region....A detailed understanding of seismicity originating from the Nanga Parbat syntaxis in the northwestern Himalaya is crucial for characterizing the active fault systems and associated neotectonic processes in the region.Continuous earthquake monitoring through local seismic stations enables high-precision results by constraining the velocity structure.In this study,seismogram data from 244 small-magnitude earthquakes are analyzed to delineate the crustal thickness and investigate the source mechanisms beneath the Nanga Parbat syntaxis.The results are achieved with the application of Coupled Hypocenter Velocity Inversion(CHVI)analysis and Time Domain Moment Tensor(TDMT)analysis.The velocity inversion suggests that the Moho discontinuity lies at 60 km depth with an average vP/vS ratio of 1.735±0.017.The minimum 1D velocity model obtained through velocity inversion with least RMS error is further utilized in determining the source mechanism solution.In contrast to earlier studies,which highlighted strike-slip displacement accompanied by reverse dip-slip components,the present research provides a revised interpretation.The moment tensor analysis conducted in this study provides evidence of transtensional deformation associated with neotectonics,attributed to the presence of multiple shear zones.The results of the source mechanism for the selected earthquakes unveiled that the oblique-slip deformation is significantly controlled by the shear stresses coupled with the normal component of dip-slip movement.This is further supported by the higher values of the doublecouple moment tensor(85%),which indicate shear deformation,while the positive value of the compensated linear vector dipole(15%)confirms the presence of a normal component.The coexistence of transpressive and transtensive stresses,together with shallow hypocentral depths and high-amplitude tangential waveforms,can potentially cause devastating impacts in the surroundings of the Nanga Parbat syntaxis.展开更多
The Anninghe–Zemuhe Fault and the Xiaojiang Fault are critical active faults along the middle-eastern boundary of the South Chuan–Dian Block. Many researchers have identified these faults as potential strong-earthqu...The Anninghe–Zemuhe Fault and the Xiaojiang Fault are critical active faults along the middle-eastern boundary of the South Chuan–Dian Block. Many researchers have identified these faults as potential strong-earthquake risk zones. In this study, we leveraged a dense seismic array to investigate the high-resolution shallow crust shear wave velocity(Vs) structure beneath the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone, one of the most complex parts of the eastern boundary of the South Chuan–Dian Block. We analyzed the distribution of microseismic events detected between November 2022 and February 2023 based on the fine-scale Vs model obtained. The microseismicity in the study region was clustered into three groups, all spatially related to major faults in this region. These microseismic events indicate near-vertical fault planes, consistent with the fault geometry revealed by other researchers.Moreover, these microseismic events are influenced by the impoundment of the downstream Baihetan Reservoir and the complex tectonic stress near the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone. The depths of these microseismic events are shallower in the junction zone, whereas moving south along the Xiaojiang Fault Zone, the microseismic events become deeper.Additionally, we compared our fine-scale local Vs model with velocity models obtained by other researchers and found that our model offers greater detail in characterizing subsurface heterogeneity while demonstrating improved reliability in delineating fault systems.展开更多
Based on the observational data from 60 short-period stations deployed in the Jishishan M6.2 earthquake epicenter and adjacent regions(Gansu Province,2023),this study inverted the near-surface S-wave velocity structur...Based on the observational data from 60 short-period stations deployed in the Jishishan M6.2 earthquake epicenter and adjacent regions(Gansu Province,2023),this study inverted the near-surface S-wave velocity structure through teleseismic receiver function analysis by using the amplitude of direct P-wave.The results reveal that the epicentral area(Liugou Township and surroundings)exhibits markedly low S-wave velocities of 400-600 m/s,with a mean value of(500±50)m/s.In contrast,intermountain basins-Guanting Basin and Dahejia Basin-demonstrate significantly elevated velocities,exceeding the epicentral zone by 100-300 m/s,with values concentrated at 600-900 m/s.Notably,localized areas such as Jintian Village and Caotan Village maintain stable S-wave velocities of(700±30)m/s.The western margin tectonic belt of Jishishan displays distinctive velocity differentiation:A pronounced velocity gradient zone along the 35.8°N latitude boundary separates northern areas(<550 m/s)from southern regions(>750 m/s).These findings demonstrate significant spatial heterogeneity in shallow S-wave velocity structures,primarily controlled by three factors:(1)topographic-geomorphic units,(2)stratigraphic lithological contrasts,and(3)anthropogenic modifications.The persistent low-velocity anomalies(<600 m/s)in the epicentral zone and northern Yellow River T2 terrace likely correlate with Quaternary unconsolidated sediments,enhanced groundwater circulation,and bedrock weathering.These results provide critical geophysical constraints for understanding both the seismogenic environment of the Jishishan earthquake and its damage distribution patterns.Furthermore,they establish a foundational framework for regional seismic intensity evaluation,site amplification analysis,and secondary hazard risk assessment.展开更多
The Sichuan-Yunnan Block is located on the southeastern margin of the Qinghai-Xizang Plateau and has frequent seismic activity on the western border,posing a potential threat to human society and economic development....The Sichuan-Yunnan Block is located on the southeastern margin of the Qinghai-Xizang Plateau and has frequent seismic activity on the western border,posing a potential threat to human society and economic development.Therefore,it is important to understand its geological evolution,assess earthquake risks,and formulate scientific and reasonable disaster prevention and mitigation strategies.Using 23 months of continuous ambient noise records from 81 seismic stations,we obtained 1248 phasevelocity dispersion curves of the fundamental Rayleigh wave at 5–50 s.The three-dimensional(3D)S-wave velocity structure in the northwestern Sichuan-Yunnan Block was obtained by pure-path and depth inversion.The results show that three lowvelocity anomalous bands were distributed nearly north-to-south(N-S)at depths of 10–35 km.The overall shape of the lowvelocity channel gradually shifted from southeast to southwest because of the influence of the Panzhihua high-velocity blocks.The low-velocity strip consists of three branches,with the first branch extending southwest from the northern part of the Lancangjiang Fault.The second branch is distributed in the N-S direction and is blocked by two high-velocity bodies near the Longpan-Qiaohou and Honghe faults.The third branch crosses the research area from N-S and gradually extends from southeast to southwest and from shallow to deep.The three low-velocity anomaly distribution areas are likely the most severely deformed areas of the collision between the Qinghai-Xizang Plateau and Yangtze Block.The results provide a more detailed understanding of the deep structure of the western boundary of the Sichuan-Yunnan Block crustal low-velocity anomalies and reliable geophysical evidence for the morphology and continuity of crustal flows.展开更多
Flow velocity uniformity of the microchannel plate is a major factor affecting the performance of microchannel devices.In order to improve the velocity distribution uniformity of the microchannel plate,we designed two...Flow velocity uniformity of the microchannel plate is a major factor affecting the performance of microchannel devices.In order to improve the velocity distribution uniformity of the microchannel plate,we designed two new microchannel structures:V-type and A-type.The effects of various structural parameters of the manifolds on the velocity distribution are reported.The V-type and A-type microchannel plates had a more uniform velocity distribution compared to the Z-type microchannel plate.The final result showed that it is beneficial for the V-type microchannel plate to obtain a more uniform velocity distribution when the manifold structure parameters are X_(in)=-1,X_(out)=0,Y_(in)=10,Y_(out)=6,Hin=4,H_(out)=1,and R=0.5.展开更多
The 1975 Haicheng earthquake represents the first successful prediction of a major earthquake in China and is the only earthquake forecast officially recognized by the United Nations.Understanding the crustal structur...The 1975 Haicheng earthquake represents the first successful prediction of a major earthquake in China and is the only earthquake forecast officially recognized by the United Nations.Understanding the crustal structure in the Haicheng region is critical for determining the seismogenic mechanisms of large earthquakes.Pg-wave tomography of the Haicheng region was used to obtain the upper crustal structure at depths of 5-10 km,in which lateral velocity variations indicate differences in tectonic activity within the seismogenic layer.A dataset comprising 62,610 Pg-wave arrival times was used to obtain highresolution seismic velocity and anisotropy images of the upper crust in the Haicheng region.The tomography results indicate that a distinct high-velocity anomaly is located in the region that produced the Haicheng and Xiuyan earthquakes,as well as a few small earthquakes at the southern end of the Jinzhou fault.This suggests that a high-velocity asperity beneath the Haichenghe fault was able to accumulate stress due to long-term tectonic loading,eventually producing the Haicheng earthquake.The seismogenesis of Haicheng earthquake can also be used to explain other large earthquakes in the slowly deforming eastern region of China.展开更多
West Java in the western part of the Sunda Arc has a relatively high seismicity due to subduction activity and faults.In this study,double-difference tomography was used to obtain the 3D velocity tomograms of P and S ...West Java in the western part of the Sunda Arc has a relatively high seismicity due to subduction activity and faults.In this study,double-difference tomography was used to obtain the 3D velocity tomograms of P and S waves beneath the western part of Java.To infer the geometry of the structure beneath the study area,precise earthquake hypo・center determination was first performed before tomographic imaging.For this,earthquake waveform data were extracted from the regional Meteorological,Climatological,Geophysical Agency(BMKG)network of Indonesia from South Sumatra to Central Java.The P and S arrival times for about 1,000 events in the period April 2009 to July 2016 were selected,the key features being events of magnitude>3,azimuthal gap<210°and number of phases>8.A nonlinear method using the oct-tree sampling algorithm from the NonLinLoc program was employed to determine the earthquake hypocenters.The hypocenter locations were then relocated using double-difference tomography(tomoDD).A significant reduction of travel-time(root mean square basis)and a better clustering of earthquakes were achieved which correlated well with the geological structure in West Java.Double-difference tomography was found to give a clear velocity structure,especially beneath the volcanic arc area,i.e.,under Mt Anak Krakatau,Mt Salak and the mountains complex in the southern part of West Java.Low velocity anomalies for the P and S waves as well as the vp/vs ratio below the volcanoes indicated possible partial melting of the upper mantle which ascended from the subducted slab beneath the volcanic arc.展开更多
Identifying potential hazards is crucial for maintaining the structural stability of opencast mining area.To address the limitations of irregular structure and sparse microseismic events in opencast mining monitoring,...Identifying potential hazards is crucial for maintaining the structural stability of opencast mining area.To address the limitations of irregular structure and sparse microseismic events in opencast mining monitoring,this paper proposes an active-source imaging method for identifying potential hazards precisely based on velocity structure.This method innovatively divides the irregular structure into unstructured grids and introduces a damping and smoothing regularization operator into the inversion process,mitigating the ill-posedness caused by the sparse distribution of events and rays.Numerical and laboratory experiments were conducted to verify the reliability and effectiveness of the proposed method.The results demonstrate the competitive performance of the method in identifying hazard areas of varying sizes and numbers.The proposed method shows potential for meeting hazard identification requirements in the complex opencast mining structure.Furthermore,field experiments were conducted on an rare earth mine slope.It confirms that the proposed method provides a more concrete and intuitive scheme for stability monitoring for the microseismic monitoring system.This paper not only demonstrates the application of acoustic structure velocity imaging technology in detecting unstructured potential hazard regions but also provides valuable insights into the construction and maintenance of stable opencast mining area.展开更多
The shear wave(S-wave)velocity is a critical rock elastic parameter in shale reservoirs,especially for evaluating shale fracability.To effectively supplement S-wave velocity under the condition of no actual measuremen...The shear wave(S-wave)velocity is a critical rock elastic parameter in shale reservoirs,especially for evaluating shale fracability.To effectively supplement S-wave velocity under the condition of no actual measurement data,this paper proposes a physically-data driven method for the S-wave velocity prediction in shale reservoirs based on the class activation mapping(CAM)technique combined with a physically constrained two-dimensional Convolutional Neural Network(2D-CNN).High-sensitivity log curves related to S-wave velocity are selected as the basis from the data sensitivity analysis.Then,we establish a petrophysical model of complex multi-mineral components based on the petrophysical properties of porous medium and the Biot-Gassmann equation.This model can help reduce the dispersion effect and constrain the 2D-CNN.In deep learning,the 2D-CNN model is optimized using the Adam,and the class activation maps(CAMs)are obtained by replacing the fully connected layer with the global average pooling(GAP)layer,resulting in explainable results.The model is then applied to wells A,B1,and B2 in the southern Songliao Basin,China and compared with the unconstrained model and the petrophysical model.The results show higher prediction accuracy and generalization ability,as evidenced by correlation coefficients and relative errors of 0.98 and 2.14%,0.97 and 2.35%,0.96 and 2.89%in the three test wells,respectively.Finally,we present the defined C-factor as a means of evaluating the extent of concern regarding CAMs in regression problems.When the results of the petrophysical model are added to the 2D feature maps,the C-factor values are significantly increased,indicating that the focus of 2D-CNN can be significantly enhanced by incorporating the petrophysical model,thereby imposing physical constraints on the 2D-CNN.In addition,we establish the SHAP model,and the results of the petrophysical model have the highest average SHAP values across the three test wells.This helps to assist in proving the importance of constraints.展开更多
We collected continuous noise waveform data from January 2007 to February 2008 recorded by 190 broadband and 10 very broadband stations of the North China Seismic Array. The study region is divided into grid with inte...We collected continuous noise waveform data from January 2007 to February 2008 recorded by 190 broadband and 10 very broadband stations of the North China Seismic Array. The study region is divided into grid with interval 0.25°×0.25°, and group velocity distribution maps between 4 s and 30 s are obtained using ambient noise tomography method. The lateral resolution is estimated to be 20-50 km for most of the study area. We construct a 3-D S wave velocity model by inverting the pure path dispersion curve at each grid using a genetic algorithm with smoothing constraint. The crustal structure observed in the model includes sedimentary basins such as North China basin, Yanqing-Huailai basin and Datong basin. A well-defined low velocity zone is observed in the Beijing-Tianjin-Tangshan region in 22-30 km depth range, which may be related to the upwelling of hot mantle material. The high velocity zone near Datong, Shuozhou and Qingshuihe within the depth range of 1-23 km reveals stable characteristics of Ordos block. The Taihangshan front fault extends to 12 km depth at least.展开更多
The Bayan Har block,one of China's most seismically active regions,has experienced multiple major earthquakes(≥M 7.0)in recent years.It is a key area for investigating the interactions between the Qinghai-Xizang(...The Bayan Har block,one of China's most seismically active regions,has experienced multiple major earthquakes(≥M 7.0)in recent years.It is a key area for investigating the interactions between the Qinghai-Xizang(Qingzang)Plateau and adjacent blocks,plateau uplift,and strong earthquake mechanisms.P-wave velocity and crustal composition provide key constraints on the properties of distinct tectonic units and their evolutionary modification processes.Based on the results of 8 Deep Seismic Sounding(DSS)profiles completed in the Bayan Har block and surrounding areas over the past 20 years,We constructed one-dimensional P-wave velocity models for the crust of Bayan Har block,Qilian fold belt,Qinling fold belt,Alxa block,Ordos block and Sichuan basin.Furthermore,crustal composition models for different tectonic units were established based on these results.The results reveal that the crustal thickness of the Bayan Har block gradually decreases towards the NNE,NE,and SE directions,while the average crustal velocity increases correspondingly.The felsic layer in the crust accounts for more than half of the total crustal thickness.The mafic content within the crust of different tectonic units exhibits notable variations,which may reflect that the Bayan Har block,Qilian fold belt,and Qinling fold belt have experienced more intensive lithospheric evolution processes compared to Ordos basin and Sichuan basin.The seismicity distribution in this region is significantly controlled by crustal velocity and composition heterogeneity across the Bayan Har block and adjacent areas,which demonstrates that earthquakes within and around the Bayan Har block exhibit both high frequency and larger magnitudes.These seismic characteristics primarily result from intense crustal stress accumulation and release during the outward expansion of the Qingzang Plateau.展开更多
The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath ...The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath WQD station near to the Tianchi caldera the low velocity layer at 8 km depth is 20 km thick with the lowest S-wave velocity about 2.2 km/s At EDO station located 50 km north of Tianchi caldera, no obvious crustal low velocity layer is detected. In the volcanic region, the thickness of crustal low velocity layer is greater and the lowest velocity is more obvious with the distance shorter to the caldera. It indicates the existence of the high temperature material or magma reservoir in crust near the Tianchi caldera. The receiver functions and inversion result from different back azimuths at CBS permanent seismic station show that the thickness of near surface low velocity layer and Moho depth change with directions. The near surface low velocity layer is obviously thicker in south direction. The Moho depth shows slight uplifting in the direction of the caldera located. We con- sider that the special near surface velocity structure is the main cause of relatively lower prominent frequency of volcanic earthquake waveforms recorded by CBS station. The slight uplifting of Moho beneath Tianchi caldera indicates there is a material exchanging channel between upper mantle and magma reservoir in crust.展开更多
The northeastern margin of the South China Sea (SCS), developed from continental rifting and breakup, is usually thought of as a non-volcanic margin. However, post-spreading volcanism is massive and lower crustal high...The northeastern margin of the South China Sea (SCS), developed from continental rifting and breakup, is usually thought of as a non-volcanic margin. However, post-spreading volcanism is massive and lower crustal high-velocity anomalies are widespread, which complicate the nature of the margin here. To better understand crustal seismic velocities, lithology, and geophysical properties, we present an S-wave velocity (VS) model and a VP/VS model for the northeastern margin by using an existing P-wave velocity (VP) model as the starting model for 2-D kinematic S-wave forward ray tracing. The Mesozoic sedimentary sequence has lower VP/VS ratios than the Cenozoic sequence;in between is a main interface of P-S conversion. Two isolated high-velocity zones (HVZ) are found in the lower crust of the continental slope, showing S-wave velocities of 4.0–4.2 km/s and VP/VS ratios of 1.73–1.78. These values indicate a mafic composition, most likely of amphibolite facies. Also, a VP/VS versus VP plot indicates a magnesium-rich gabbro facies from post-spreading mantle melting at temperatures higher than normal. A third high-velocity zone (VP : 7.0–7.8 km/s;VP/VS: 1.85–1.96), 70-km wide and 4-km thick in the continent-ocean transition zone, is most likely to be a consequence of serpentinization of upwelled upper mantle. Seismic velocity structures and also gravity anomalies indicate that mantle upwelling/ serpentinization could be the most severe in the northeasternmost continent-ocean boundary of the SCS. Empirical relationships between seismic velocity and degree of serpentinization suggest that serpentinite content decreases with depth, from 43% in the lower crust to 37% into the mantle.展开更多
In this article, we analyze the characters of SV-component receiver function of teleseismic body waves and its advantages in mapping the S-wave velocity structure of crust in detail. Similar to radial receiver functio...In this article, we analyze the characters of SV-component receiver function of teleseismic body waves and its advantages in mapping the S-wave velocity structure of crust in detail. Similar to radial receiver function, SV-component receiver function can be obtained by directly deconvolving the P-component from the SV-component of teleseismic recordings. Our analyses indicate that the change of amplitude of SV-component receiver function against the change of epicentral distance is less than that of radial receiver function. Moreover, the waveform of SV-component receiver function is simpler than the radial receiver function and gives prominence to the PS converted phases that are the most sensitive to the shear wave velocity structure in the inversion. The synthetic tests show that the convergence of SV-component receiver function inversion is faster than that of the radial receiver function inversion. As an example, we investigate the S-wave velocity structure beneath HIA sta-tion by using the SV-component receiver function inversion method.展开更多
The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ning...The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ningdu basin can provide important information for geothermal resource exploration.In this study,we deployed a dense seismic array in the Ningdu basin to investigate the 3D velocity structure and discuss implications for geothermal exploration and geological evolution.Based on the dense seismic array including 35 short-period(5 s-100 Hz)seismometers with an average interstation distance of~5 km,Rayleigh surface wave dispersion curves were extracted from the continuous ambient noise data for surface wave tomographic inversion.Group velocity tomography was conducted and the 3D S-wave velocity structure was inverted by the neighborhood algorithm.The results revealed obvious low-velocity anomalies in the center of the basin,consistent with the low-velocity Cretaceous sedimentary rocks.The basement and basin-controlling fault can also be depicted by the S-wave velocity anomalies.The obvious seismic interface is about 2 km depth in the basin center and decreases to 700 m depth near the basin boundary,suggesting spatial thickness variations of the Cretaceous sediment.The fault features of the S-wave velocity profile coincide with the geological cognition of the western boundary basincontrolling fault,which may provide possible upwelling channels for geothermal fluid.This study suggests that seismic tomography with a dense array is an effective method and can play an important role in the detailed investigations of sedimentary basins.展开更多
The time sequence of longitudinal velocity component at different vertical locations in turbulent boundary layer was finely measured in a wind tunnel. The concept of coarse_grained velocity structure functions, which ...The time sequence of longitudinal velocity component at different vertical locations in turbulent boundary layer was finely measured in a wind tunnel. The concept of coarse_grained velocity structure functions, which describes the relative motions of straining and compressing for multi_scale eddy structures in turbulent flows, was put forward based on the theory of locally multi_scale average. Based on the consistency between coarse_grained velocity structure function and Harr wavelet transformation,detecting method was presented, by which the coherent structures and their intermittency was identified by multi_scale flatness factor calculated by locally average structure function. Phase_averaged evolution course for multi_scale coherent eddy structures in wall turbulence were extracted by this conditional sampling to educe scheme. The dynamics course of multi_scale coherent eddy structures and their effects on statistics of turbulent flows were studied.展开更多
We use observations recorded by 23 permanent and 99 temporary stations in the SE Tibetan plateau to obtain the S-wave velocity structure along two profiles by applying joint inversion with receiver functions and surfa...We use observations recorded by 23 permanent and 99 temporary stations in the SE Tibetan plateau to obtain the S-wave velocity structure along two profiles by applying joint inversion with receiver functions and surface waves. The two profiles cross West Yunnan block （WYB）, the Central Yunnan sub-block （CYB）, South China block （SCB）, and Nanpanjiang basin （NPB）. The profile at -25°N shows that the Moho interface in the CYB is deeper than those in the WYB and the NPB, and the topography and Moho depth have clear correspondence. Beneath the Xiaojiang fault zone （XJF）, there exists a crustal low-velocity zone （LYZ）, crossing the XJF and expanding eastward into the SCB. The NPB is shown to be of relatively high velocity. We speculate that the eastward extrusion of the Tibetan plateau may pass through the XJF and affect its eastern region, and is resisted by the rigid NPB, which has high velocity. This may be the main cause of the crustal thickening and uplift of the topography. In the Tengchong volcanic area, the crust is shown to have alternate high- and low-velocity layers, and the upper mantle is shown to be of low velocity. We consider that the magma which exists in the crust is from the upper mantle and that the complex crustal velocity structure is related to magmatic differentiation. Between the Tengchong volcanic area and the XJF, the crustal velocity is relatively high. Combining these observations with other geophysical evi- dence, it is indicated that rock strength is high and defor- mation is weak in this area, which is why the level of seismicity is quite low. The profile at ~ 23~N shows that the variation of the Moho depth is small from the eastern rigid block to the western active block with a wide range of LVZs. We consider that deformation to the south of the SE Tibetan Plateau is weak.展开更多
Tengchong volcanic area is located near the impinging and underthrust margin of India and Eurasia plates. The volcanic activity is closely related to the tectonic environment. The deep structure characteristics are in...Tengchong volcanic area is located near the impinging and underthrust margin of India and Eurasia plates. The volcanic activity is closely related to the tectonic environment. The deep structure characteristics are inferred from the receiver function inversion with the teleseismic records in the paper. The results show that the low velocity zone is influenced by the NE-trending Dayingjiang fault. The S-wave low velocity structure occurs obviously in the southern part of the fault, but unobviously in its northern part. There are low velocity zones in the shallow po-sition, which coincides with the seismicity. It also demonstrates that the low velocity zone is directly related to the thermal activity in the volcanic area. Therefore, we consider that the volcano may be alive again.展开更多
Microtremors array observation for estimating S-wave velocity structure from phase velocities of Rayleigh and Love wave on two practical sites in Tangshan area by a China-US joint group are researched.The phase veloci...Microtremors array observation for estimating S-wave velocity structure from phase velocities of Rayleigh and Love wave on two practical sites in Tangshan area by a China-US joint group are researched.The phase velocities of Rayleigh wave are estimated from vertical component records and those of Love wave are estimated from three-component records of microtremors array using modified spatial auto-correlation method.Haskell matrix method is used in calculating Rayleigh and Love wave phase velocities,and the shallow S-wave velocity structure of two practical sites are estimated by means of a hybrid approach of Genetic Algorithm and Simplex.The results are compared with the PS logging data of the two sites,showing it is feasible to estimate the shallow S-wave velocity structure of practical site from the observation of microtremor array.展开更多
We present crustal models for seismic P-waves(Vp),S-waves(Vs)and the Vp/Vs ratio across the southern North China Craton along latitude 36°N.Our results are based on inverse and forward modeling of long-range wide...We present crustal models for seismic P-waves(Vp),S-waves(Vs)and the Vp/Vs ratio across the southern North China Craton along latitude 36°N.Our results are based on inverse and forward modeling of long-range wide-angle reflection/refraction data.The crust of the southern Ordos Block has high lower crustal velocity(7.0 km/s)and a Moho depth of~42 km.In contrast,thick sediments and a lower average velocity(compared with the Ordos block)found underneath the Shanxi Graben are likely to be the products of rifting that has occurred since the Cenozoic.Steep Moho dips,exposed basement rock and higher average crustal velocity beneath the Lüliang Mountain and the Taihang Mountain are characteristic of an orogenic belt.The Tanlu fault and the Liaocheng-Lankao fault show sharp crustal velocity variations and a Moho offset.This seismic profile sampled the entire region of the Eastern North China Craton where the cratonic root has been destroyed and the unique crustal structure is correlated with the substantially modified lithosphere.Our crustal seismic velocity model shows a strong correspondence between surface geology,local tectonics and the deep crustal structure.展开更多
文摘A detailed understanding of seismicity originating from the Nanga Parbat syntaxis in the northwestern Himalaya is crucial for characterizing the active fault systems and associated neotectonic processes in the region.Continuous earthquake monitoring through local seismic stations enables high-precision results by constraining the velocity structure.In this study,seismogram data from 244 small-magnitude earthquakes are analyzed to delineate the crustal thickness and investigate the source mechanisms beneath the Nanga Parbat syntaxis.The results are achieved with the application of Coupled Hypocenter Velocity Inversion(CHVI)analysis and Time Domain Moment Tensor(TDMT)analysis.The velocity inversion suggests that the Moho discontinuity lies at 60 km depth with an average vP/vS ratio of 1.735±0.017.The minimum 1D velocity model obtained through velocity inversion with least RMS error is further utilized in determining the source mechanism solution.In contrast to earlier studies,which highlighted strike-slip displacement accompanied by reverse dip-slip components,the present research provides a revised interpretation.The moment tensor analysis conducted in this study provides evidence of transtensional deformation associated with neotectonics,attributed to the presence of multiple shear zones.The results of the source mechanism for the selected earthquakes unveiled that the oblique-slip deformation is significantly controlled by the shear stresses coupled with the normal component of dip-slip movement.This is further supported by the higher values of the doublecouple moment tensor(85%),which indicate shear deformation,while the positive value of the compensated linear vector dipole(15%)confirms the presence of a normal component.The coexistence of transpressive and transtensive stresses,together with shallow hypocentral depths and high-amplitude tangential waveforms,can potentially cause devastating impacts in the surroundings of the Nanga Parbat syntaxis.
基金funded by the National Key R&D Program of China (Grant No. 2021YFC3000704)the National Natural Science Foundation of China (Grant No. 42125401)the Central Public-interest Scientific Institution Basal Research Fund (Grant No. CEAIEF20240401)。
文摘The Anninghe–Zemuhe Fault and the Xiaojiang Fault are critical active faults along the middle-eastern boundary of the South Chuan–Dian Block. Many researchers have identified these faults as potential strong-earthquake risk zones. In this study, we leveraged a dense seismic array to investigate the high-resolution shallow crust shear wave velocity(Vs) structure beneath the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone, one of the most complex parts of the eastern boundary of the South Chuan–Dian Block. We analyzed the distribution of microseismic events detected between November 2022 and February 2023 based on the fine-scale Vs model obtained. The microseismicity in the study region was clustered into three groups, all spatially related to major faults in this region. These microseismic events indicate near-vertical fault planes, consistent with the fault geometry revealed by other researchers.Moreover, these microseismic events are influenced by the impoundment of the downstream Baihetan Reservoir and the complex tectonic stress near the junction of the Zemuhe Fault Zone and the Xiaojiang Fault Zone. The depths of these microseismic events are shallower in the junction zone, whereas moving south along the Xiaojiang Fault Zone, the microseismic events become deeper.Additionally, we compared our fine-scale local Vs model with velocity models obtained by other researchers and found that our model offers greater detail in characterizing subsurface heterogeneity while demonstrating improved reliability in delineating fault systems.
基金project is supported in part by Broadband Seismic 3D Array Detection(PhaseⅠ),Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(Grant No.2024ZD1000300)National Natural Science Foundation of China(42204061)Gansu Jishishan 6.2 magnitude earthquake scientific investigation(DQJB23Y45)program。
文摘Based on the observational data from 60 short-period stations deployed in the Jishishan M6.2 earthquake epicenter and adjacent regions(Gansu Province,2023),this study inverted the near-surface S-wave velocity structure through teleseismic receiver function analysis by using the amplitude of direct P-wave.The results reveal that the epicentral area(Liugou Township and surroundings)exhibits markedly low S-wave velocities of 400-600 m/s,with a mean value of(500±50)m/s.In contrast,intermountain basins-Guanting Basin and Dahejia Basin-demonstrate significantly elevated velocities,exceeding the epicentral zone by 100-300 m/s,with values concentrated at 600-900 m/s.Notably,localized areas such as Jintian Village and Caotan Village maintain stable S-wave velocities of(700±30)m/s.The western margin tectonic belt of Jishishan displays distinctive velocity differentiation:A pronounced velocity gradient zone along the 35.8°N latitude boundary separates northern areas(<550 m/s)from southern regions(>750 m/s).These findings demonstrate significant spatial heterogeneity in shallow S-wave velocity structures,primarily controlled by three factors:(1)topographic-geomorphic units,(2)stratigraphic lithological contrasts,and(3)anthropogenic modifications.The persistent low-velocity anomalies(<600 m/s)in the epicentral zone and northern Yellow River T2 terrace likely correlate with Quaternary unconsolidated sediments,enhanced groundwater circulation,and bedrock weathering.These results provide critical geophysical constraints for understanding both the seismogenic environment of the Jishishan earthquake and its damage distribution patterns.Furthermore,they establish a foundational framework for regional seismic intensity evaluation,site amplification analysis,and secondary hazard risk assessment.
基金support from the National Natural Science Foundation of China(No.42474081)Basic Research Business of the Institute of Geophysics,China Earthquake Administration(Nos.DQJB 22R29 and DQJB19B30)Basic Research Business Special Project of the Earthquake Prediction Institute of the China Earthquake Administration(No.CEAIEF20220204).
文摘The Sichuan-Yunnan Block is located on the southeastern margin of the Qinghai-Xizang Plateau and has frequent seismic activity on the western border,posing a potential threat to human society and economic development.Therefore,it is important to understand its geological evolution,assess earthquake risks,and formulate scientific and reasonable disaster prevention and mitigation strategies.Using 23 months of continuous ambient noise records from 81 seismic stations,we obtained 1248 phasevelocity dispersion curves of the fundamental Rayleigh wave at 5–50 s.The three-dimensional(3D)S-wave velocity structure in the northwestern Sichuan-Yunnan Block was obtained by pure-path and depth inversion.The results show that three lowvelocity anomalous bands were distributed nearly north-to-south(N-S)at depths of 10–35 km.The overall shape of the lowvelocity channel gradually shifted from southeast to southwest because of the influence of the Panzhihua high-velocity blocks.The low-velocity strip consists of three branches,with the first branch extending southwest from the northern part of the Lancangjiang Fault.The second branch is distributed in the N-S direction and is blocked by two high-velocity bodies near the Longpan-Qiaohou and Honghe faults.The third branch crosses the research area from N-S and gradually extends from southeast to southwest and from shallow to deep.The three low-velocity anomaly distribution areas are likely the most severely deformed areas of the collision between the Qinghai-Xizang Plateau and Yangtze Block.The results provide a more detailed understanding of the deep structure of the western boundary of the Sichuan-Yunnan Block crustal low-velocity anomalies and reliable geophysical evidence for the morphology and continuity of crustal flows.
基金supported by Scientific Research Project of Guangdong Provincial Department of Education(2024KQNCX152).
文摘Flow velocity uniformity of the microchannel plate is a major factor affecting the performance of microchannel devices.In order to improve the velocity distribution uniformity of the microchannel plate,we designed two new microchannel structures:V-type and A-type.The effects of various structural parameters of the manifolds on the velocity distribution are reported.The V-type and A-type microchannel plates had a more uniform velocity distribution compared to the Z-type microchannel plate.The final result showed that it is beneficial for the V-type microchannel plate to obtain a more uniform velocity distribution when the manifold structure parameters are X_(in)=-1,X_(out)=0,Y_(in)=10,Y_(out)=6,Hin=4,H_(out)=1,and R=0.5.
基金support provided by the National Earthquake Data Centerfinancially supported by the National Natural Science Foundation of China(Nos.42130306 and U2039203)the National Key Research and Development Project(No.2022YFC3003701)
文摘The 1975 Haicheng earthquake represents the first successful prediction of a major earthquake in China and is the only earthquake forecast officially recognized by the United Nations.Understanding the crustal structure in the Haicheng region is critical for determining the seismogenic mechanisms of large earthquakes.Pg-wave tomography of the Haicheng region was used to obtain the upper crustal structure at depths of 5-10 km,in which lateral velocity variations indicate differences in tectonic activity within the seismogenic layer.A dataset comprising 62,610 Pg-wave arrival times was used to obtain highresolution seismic velocity and anisotropy images of the upper crust in the Haicheng region.The tomography results indicate that a distinct high-velocity anomaly is located in the region that produced the Haicheng and Xiuyan earthquakes,as well as a few small earthquakes at the southern end of the Jinzhou fault.This suggests that a high-velocity asperity beneath the Haichenghe fault was able to accumulate stress due to long-term tectonic loading,eventually producing the Haicheng earthquake.The seismogenesis of Haicheng earthquake can also be used to explain other large earthquakes in the slowly deforming eastern region of China.
基金the Directorate General of Resources for Science Technologythe Higher Education of the Republic of Indonesia for granting a PMDSU scholarship to SR
文摘West Java in the western part of the Sunda Arc has a relatively high seismicity due to subduction activity and faults.In this study,double-difference tomography was used to obtain the 3D velocity tomograms of P and S waves beneath the western part of Java.To infer the geometry of the structure beneath the study area,precise earthquake hypo・center determination was first performed before tomographic imaging.For this,earthquake waveform data were extracted from the regional Meteorological,Climatological,Geophysical Agency(BMKG)network of Indonesia from South Sumatra to Central Java.The P and S arrival times for about 1,000 events in the period April 2009 to July 2016 were selected,the key features being events of magnitude>3,azimuthal gap<210°and number of phases>8.A nonlinear method using the oct-tree sampling algorithm from the NonLinLoc program was employed to determine the earthquake hypocenters.The hypocenter locations were then relocated using double-difference tomography(tomoDD).A significant reduction of travel-time(root mean square basis)and a better clustering of earthquakes were achieved which correlated well with the geological structure in West Java.Double-difference tomography was found to give a clear velocity structure,especially beneath the volcanic arc area,i.e.,under Mt Anak Krakatau,Mt Salak and the mountains complex in the southern part of West Java.Low velocity anomalies for the P and S waves as well as the vp/vs ratio below the volcanoes indicated possible partial melting of the upper mantle which ascended from the subducted slab beneath the volcanic arc.
基金Project(2021YFC2900500)supported by the National Key Research and Development Program of China。
文摘Identifying potential hazards is crucial for maintaining the structural stability of opencast mining area.To address the limitations of irregular structure and sparse microseismic events in opencast mining monitoring,this paper proposes an active-source imaging method for identifying potential hazards precisely based on velocity structure.This method innovatively divides the irregular structure into unstructured grids and introduces a damping and smoothing regularization operator into the inversion process,mitigating the ill-posedness caused by the sparse distribution of events and rays.Numerical and laboratory experiments were conducted to verify the reliability and effectiveness of the proposed method.The results demonstrate the competitive performance of the method in identifying hazard areas of varying sizes and numbers.The proposed method shows potential for meeting hazard identification requirements in the complex opencast mining structure.Furthermore,field experiments were conducted on an rare earth mine slope.It confirms that the proposed method provides a more concrete and intuitive scheme for stability monitoring for the microseismic monitoring system.This paper not only demonstrates the application of acoustic structure velocity imaging technology in detecting unstructured potential hazard regions but also provides valuable insights into the construction and maintenance of stable opencast mining area.
基金supported by the National Natural Science Foundation of China(Nos.42374150,42374152)Natural Science Foundation of Shandong Province(ZR2020MD050).
文摘The shear wave(S-wave)velocity is a critical rock elastic parameter in shale reservoirs,especially for evaluating shale fracability.To effectively supplement S-wave velocity under the condition of no actual measurement data,this paper proposes a physically-data driven method for the S-wave velocity prediction in shale reservoirs based on the class activation mapping(CAM)technique combined with a physically constrained two-dimensional Convolutional Neural Network(2D-CNN).High-sensitivity log curves related to S-wave velocity are selected as the basis from the data sensitivity analysis.Then,we establish a petrophysical model of complex multi-mineral components based on the petrophysical properties of porous medium and the Biot-Gassmann equation.This model can help reduce the dispersion effect and constrain the 2D-CNN.In deep learning,the 2D-CNN model is optimized using the Adam,and the class activation maps(CAMs)are obtained by replacing the fully connected layer with the global average pooling(GAP)layer,resulting in explainable results.The model is then applied to wells A,B1,and B2 in the southern Songliao Basin,China and compared with the unconstrained model and the petrophysical model.The results show higher prediction accuracy and generalization ability,as evidenced by correlation coefficients and relative errors of 0.98 and 2.14%,0.97 and 2.35%,0.96 and 2.89%in the three test wells,respectively.Finally,we present the defined C-factor as a means of evaluating the extent of concern regarding CAMs in regression problems.When the results of the petrophysical model are added to the 2D feature maps,the C-factor values are significantly increased,indicating that the focus of 2D-CNN can be significantly enhanced by incorporating the petrophysical model,thereby imposing physical constraints on the 2D-CNN.In addition,we establish the SHAP model,and the results of the petrophysical model have the highest average SHAP values across the three test wells.This helps to assist in proving the importance of constraints.
基金supported by the National Natural Science Foundation of China (Nos. 40774038 and 90914005)Basic Research Project of Ministry of Science and Technology of China (No. 2006FY110100)+2 种基金National Nonprofit Institute Research Grant of Institute of Geophysics,China Earthquake Administration (IGPCEA) (No. DQJB09B08)supported by Italian MUR and University of Trieste in the framework of the Internationalization PhD Program (2004-2006)Contribution No. is 10FE3008,IGPCEA
文摘We collected continuous noise waveform data from January 2007 to February 2008 recorded by 190 broadband and 10 very broadband stations of the North China Seismic Array. The study region is divided into grid with interval 0.25°×0.25°, and group velocity distribution maps between 4 s and 30 s are obtained using ambient noise tomography method. The lateral resolution is estimated to be 20-50 km for most of the study area. We construct a 3-D S wave velocity model by inverting the pure path dispersion curve at each grid using a genetic algorithm with smoothing constraint. The crustal structure observed in the model includes sedimentary basins such as North China basin, Yanqing-Huailai basin and Datong basin. A well-defined low velocity zone is observed in the Beijing-Tianjin-Tangshan region in 22-30 km depth range, which may be related to the upwelling of hot mantle material. The high velocity zone near Datong, Shuozhou and Qingshuihe within the depth range of 1-23 km reveals stable characteristics of Ordos block. The Taihangshan front fault extends to 12 km depth at least.
基金supported by the National Key R&D Program of China(No.2023YFC3012002)the National Natural Science Foundation of China(42374073)。
文摘The Bayan Har block,one of China's most seismically active regions,has experienced multiple major earthquakes(≥M 7.0)in recent years.It is a key area for investigating the interactions between the Qinghai-Xizang(Qingzang)Plateau and adjacent blocks,plateau uplift,and strong earthquake mechanisms.P-wave velocity and crustal composition provide key constraints on the properties of distinct tectonic units and their evolutionary modification processes.Based on the results of 8 Deep Seismic Sounding(DSS)profiles completed in the Bayan Har block and surrounding areas over the past 20 years,We constructed one-dimensional P-wave velocity models for the crust of Bayan Har block,Qilian fold belt,Qinling fold belt,Alxa block,Ordos block and Sichuan basin.Furthermore,crustal composition models for different tectonic units were established based on these results.The results reveal that the crustal thickness of the Bayan Har block gradually decreases towards the NNE,NE,and SE directions,while the average crustal velocity increases correspondingly.The felsic layer in the crust accounts for more than half of the total crustal thickness.The mafic content within the crust of different tectonic units exhibits notable variations,which may reflect that the Bayan Har block,Qilian fold belt,and Qinling fold belt have experienced more intensive lithospheric evolution processes compared to Ordos basin and Sichuan basin.The seismicity distribution in this region is significantly controlled by crustal velocity and composition heterogeneity across the Bayan Har block and adjacent areas,which demonstrates that earthquakes within and around the Bayan Har block exhibit both high frequency and larger magnitudes.These seismic characteristics primarily result from intense crustal stress accumulation and release during the outward expansion of the Qingzang Plateau.
基金supported by National Key Project of Scientific and Technical Supporting Programs Funded by Ministry of Science & Technology of China (2006BAC01B04)Joint Seismological Science Foundation of China (106023)Contribution No. is 09FE3006 of Institute of Geophysics,China Earthquake Administration
文摘The S wave velocity structure in Changbaishan volcanic region was obtained from teleseismic receiver function modeling. The results show that there exist distinct low velocity layers in crust in volcano area. Beneath WQD station near to the Tianchi caldera the low velocity layer at 8 km depth is 20 km thick with the lowest S-wave velocity about 2.2 km/s At EDO station located 50 km north of Tianchi caldera, no obvious crustal low velocity layer is detected. In the volcanic region, the thickness of crustal low velocity layer is greater and the lowest velocity is more obvious with the distance shorter to the caldera. It indicates the existence of the high temperature material or magma reservoir in crust near the Tianchi caldera. The receiver functions and inversion result from different back azimuths at CBS permanent seismic station show that the thickness of near surface low velocity layer and Moho depth change with directions. The near surface low velocity layer is obviously thicker in south direction. The Moho depth shows slight uplifting in the direction of the caldera located. We con- sider that the special near surface velocity structure is the main cause of relatively lower prominent frequency of volcanic earthquake waveforms recorded by CBS station. The slight uplifting of Moho beneath Tianchi caldera indicates there is a material exchanging channel between upper mantle and magma reservoir in crust.
基金South China Sea Institute of Oceanology (SCSIO) for providing R/V Shiyan-2 to carry out this experiment,sponsored by Oceanographic Research Vessel Sharing Plan (NORC2016-08) of National Natural Science Foundation of Chinafunded by National Natural Science Foundation of China (Grant Nos. 41776057, 41761134051, 91858213, 41730532 and 91428039)
文摘The northeastern margin of the South China Sea (SCS), developed from continental rifting and breakup, is usually thought of as a non-volcanic margin. However, post-spreading volcanism is massive and lower crustal high-velocity anomalies are widespread, which complicate the nature of the margin here. To better understand crustal seismic velocities, lithology, and geophysical properties, we present an S-wave velocity (VS) model and a VP/VS model for the northeastern margin by using an existing P-wave velocity (VP) model as the starting model for 2-D kinematic S-wave forward ray tracing. The Mesozoic sedimentary sequence has lower VP/VS ratios than the Cenozoic sequence;in between is a main interface of P-S conversion. Two isolated high-velocity zones (HVZ) are found in the lower crust of the continental slope, showing S-wave velocities of 4.0–4.2 km/s and VP/VS ratios of 1.73–1.78. These values indicate a mafic composition, most likely of amphibolite facies. Also, a VP/VS versus VP plot indicates a magnesium-rich gabbro facies from post-spreading mantle melting at temperatures higher than normal. A third high-velocity zone (VP : 7.0–7.8 km/s;VP/VS: 1.85–1.96), 70-km wide and 4-km thick in the continent-ocean transition zone, is most likely to be a consequence of serpentinization of upwelled upper mantle. Seismic velocity structures and also gravity anomalies indicate that mantle upwelling/ serpentinization could be the most severe in the northeasternmost continent-ocean boundary of the SCS. Empirical relationships between seismic velocity and degree of serpentinization suggest that serpentinite content decreases with depth, from 43% in the lower crust to 37% into the mantle.
基金State Key Basic Research Development and Programming Project (G199804070201) State Natural Science Foundation (40074008).
文摘In this article, we analyze the characters of SV-component receiver function of teleseismic body waves and its advantages in mapping the S-wave velocity structure of crust in detail. Similar to radial receiver function, SV-component receiver function can be obtained by directly deconvolving the P-component from the SV-component of teleseismic recordings. Our analyses indicate that the change of amplitude of SV-component receiver function against the change of epicentral distance is less than that of radial receiver function. Moreover, the waveform of SV-component receiver function is simpler than the radial receiver function and gives prominence to the PS converted phases that are the most sensitive to the shear wave velocity structure in the inversion. The synthetic tests show that the convergence of SV-component receiver function inversion is faster than that of the radial receiver function inversion. As an example, we investigate the S-wave velocity structure beneath HIA sta-tion by using the SV-component receiver function inversion method.
基金supported by China Geological Survey (DD20190083, DD20221662)National Natural Science Foundation of China (41904044, 41974064, 42174076, 41874069)Youth Innovation Promotion Association CAS (2019330).
文摘The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ningdu basin can provide important information for geothermal resource exploration.In this study,we deployed a dense seismic array in the Ningdu basin to investigate the 3D velocity structure and discuss implications for geothermal exploration and geological evolution.Based on the dense seismic array including 35 short-period(5 s-100 Hz)seismometers with an average interstation distance of~5 km,Rayleigh surface wave dispersion curves were extracted from the continuous ambient noise data for surface wave tomographic inversion.Group velocity tomography was conducted and the 3D S-wave velocity structure was inverted by the neighborhood algorithm.The results revealed obvious low-velocity anomalies in the center of the basin,consistent with the low-velocity Cretaceous sedimentary rocks.The basement and basin-controlling fault can also be depicted by the S-wave velocity anomalies.The obvious seismic interface is about 2 km depth in the basin center and decreases to 700 m depth near the basin boundary,suggesting spatial thickness variations of the Cretaceous sediment.The fault features of the S-wave velocity profile coincide with the geological cognition of the western boundary basincontrolling fault,which may provide possible upwelling channels for geothermal fluid.This study suggests that seismic tomography with a dense array is an effective method and can play an important role in the detailed investigations of sedimentary basins.
文摘The time sequence of longitudinal velocity component at different vertical locations in turbulent boundary layer was finely measured in a wind tunnel. The concept of coarse_grained velocity structure functions, which describes the relative motions of straining and compressing for multi_scale eddy structures in turbulent flows, was put forward based on the theory of locally multi_scale average. Based on the consistency between coarse_grained velocity structure function and Harr wavelet transformation,detecting method was presented, by which the coherent structures and their intermittency was identified by multi_scale flatness factor calculated by locally average structure function. Phase_averaged evolution course for multi_scale coherent eddy structures in wall turbulence were extracted by this conditional sampling to educe scheme. The dynamics course of multi_scale coherent eddy structures and their effects on statistics of turbulent flows were studied.
基金supported by a National Natural Science Foundation of China (Grant No. 41374097)China National Special Fund for Earthquake Scientific Research in Public Interest (Grant No. 201008001)
文摘We use observations recorded by 23 permanent and 99 temporary stations in the SE Tibetan plateau to obtain the S-wave velocity structure along two profiles by applying joint inversion with receiver functions and surface waves. The two profiles cross West Yunnan block （WYB）, the Central Yunnan sub-block （CYB）, South China block （SCB）, and Nanpanjiang basin （NPB）. The profile at -25°N shows that the Moho interface in the CYB is deeper than those in the WYB and the NPB, and the topography and Moho depth have clear correspondence. Beneath the Xiaojiang fault zone （XJF）, there exists a crustal low-velocity zone （LYZ）, crossing the XJF and expanding eastward into the SCB. The NPB is shown to be of relatively high velocity. We speculate that the eastward extrusion of the Tibetan plateau may pass through the XJF and affect its eastern region, and is resisted by the rigid NPB, which has high velocity. This may be the main cause of the crustal thickening and uplift of the topography. In the Tengchong volcanic area, the crust is shown to have alternate high- and low-velocity layers, and the upper mantle is shown to be of low velocity. We consider that the magma which exists in the crust is from the upper mantle and that the complex crustal velocity structure is related to magmatic differentiation. Between the Tengchong volcanic area and the XJF, the crustal velocity is relatively high. Combining these observations with other geophysical evi- dence, it is indicated that rock strength is high and defor- mation is weak in this area, which is why the level of seismicity is quite low. The profile at ~ 23~N shows that the variation of the Moho depth is small from the eastern rigid block to the western active block with a wide range of LVZs. We consider that deformation to the south of the SE Tibetan Plateau is weak.
文摘Tengchong volcanic area is located near the impinging and underthrust margin of India and Eurasia plates. The volcanic activity is closely related to the tectonic environment. The deep structure characteristics are inferred from the receiver function inversion with the teleseismic records in the paper. The results show that the low velocity zone is influenced by the NE-trending Dayingjiang fault. The S-wave low velocity structure occurs obviously in the southern part of the fault, but unobviously in its northern part. There are low velocity zones in the shallow po-sition, which coincides with the seismicity. It also demonstrates that the low velocity zone is directly related to the thermal activity in the volcanic area. Therefore, we consider that the volcano may be alive again.
基金Supported by National Natural Science Foundation of China(No.50378032and No.50538030)Associated Foundation of Earthquake Science(No.201009)Foundation of Heilongjiang Institute of Science and Technology(No.04-15).
文摘Microtremors array observation for estimating S-wave velocity structure from phase velocities of Rayleigh and Love wave on two practical sites in Tangshan area by a China-US joint group are researched.The phase velocities of Rayleigh wave are estimated from vertical component records and those of Love wave are estimated from three-component records of microtremors array using modified spatial auto-correlation method.Haskell matrix method is used in calculating Rayleigh and Love wave phase velocities,and the shallow S-wave velocity structure of two practical sites are estimated by means of a hybrid approach of Genetic Algorithm and Simplex.The results are compared with the PS logging data of the two sites,showing it is feasible to estimate the shallow S-wave velocity structure of practical site from the observation of microtremor array.
基金supported by the DREAM project of the National Key R&D Program of China(No.2016YFC0600402)the National Natural Science Foundation of China(No.41774071)the US Gelogical Survey Earthquake Hazards Program。
文摘We present crustal models for seismic P-waves(Vp),S-waves(Vs)and the Vp/Vs ratio across the southern North China Craton along latitude 36°N.Our results are based on inverse and forward modeling of long-range wide-angle reflection/refraction data.The crust of the southern Ordos Block has high lower crustal velocity(7.0 km/s)and a Moho depth of~42 km.In contrast,thick sediments and a lower average velocity(compared with the Ordos block)found underneath the Shanxi Graben are likely to be the products of rifting that has occurred since the Cenozoic.Steep Moho dips,exposed basement rock and higher average crustal velocity beneath the Lüliang Mountain and the Taihang Mountain are characteristic of an orogenic belt.The Tanlu fault and the Liaocheng-Lankao fault show sharp crustal velocity variations and a Moho offset.This seismic profile sampled the entire region of the Eastern North China Craton where the cratonic root has been destroyed and the unique crustal structure is correlated with the substantially modified lithosphere.Our crustal seismic velocity model shows a strong correspondence between surface geology,local tectonics and the deep crustal structure.
