The attenuation factor or quality factor(Q-factor or Q) has been used to measure the energy attenuation of seismic waves propagating in underground media. Many methods are used to estimate the Q-factor. We propose a m...The attenuation factor or quality factor(Q-factor or Q) has been used to measure the energy attenuation of seismic waves propagating in underground media. Many methods are used to estimate the Q-factor. We propose a method to calculate the Q-factor based on the prestack Q-factor inversion and the generalized S-transform. The proposed method specifies a standard primary wavelet and calculates the cumulative Q-factors; then, it finds the interlaminar Q-factors using the relation between Q and offset(QVO) and the Dix formula. The proposed method is alternative to methods that calculate interlaminar Q-factors after horizon picking. Because the frequency spectrum of each horizon can be extracted continuously on a 2D time–frequency spectrum, the method is called the continuous spectral ratio slope(CSRS) method. Compared with the other Q-inversion methods, the method offers nearly effortless computations and stability, and has mathematical and physical significance. We use numerical modeling to verify the feasibility of the method and apply it to real data from an oilfield in Ahdeb, Iraq. The results suggest that the resolution and spatial stability of the Q-profile are optimal and contain abundant interlaminar information that is extremely helpful in making lithology and fluid predictions.展开更多
The development of high-performance transition metal sulfide(TMS)/carbon composites to replace conventional graphite anode remains a critical challenge for advancing lithium-ion batteries(LIBs).In this study,a facile ...The development of high-performance transition metal sulfide(TMS)/carbon composites to replace conventional graphite anode remains a critical challenge for advancing lithium-ion batteries(LIBs).In this study,a facile self-sacrifice template method is developed to prepare FeS encapsulated into N,S co-doped carbon(FeS/NSC)composite using melamine-cyanuric acid(MCA)supermolecule as a multifunctional template precursor.The function of MCA supermolecule for material synthesis is explored,revealing its special function as a dispersant,dopant and pore-forming agent.Furthermore,the effect of Fe source dosage on the morphology,structure and composition of the final products is explored.The resultant FeS/NSC-0.1(where 0.1 represents the mass of added Fe source)exhibits the most optimal proportion,characterized by a good dispersion status of FeS within the NSC matrix,effective N,S co-doping and ample porosity.Benefiting from these merits,the FeS/NSC-0.1 anode demonstrates significantly improved cycling stability and rate capability when compared to the counterparts.Undoubtedly,this work offers a universal method to produce advanced transition metal sulfide/carbon composite electrodes for energy storage and conversion systems.展开更多
In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult....In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult.Unfortunately,there are few studies on the failure and support mechanism of the surrounding rocks in the excavation of supported tunnel,while most model tests of super-large-span tunnels focus on the failure characteristics of surrounding rocks in tunnel excavation without supports.Based on excavation compensation method(ECM),model tests of a super-large-span tunnel excavation by different anchor cable support methods in the initial support stage were carried out.The results indicate that during excavation of super-large-span tunnel,the stress and displacement of the shallow surrounding rocks decrease,following a step-shape pattern,and the tunnel failure is mainly concentrated on the vault and spandrel areas.Compared with conventional anchor cable supports,the NPR(negative Poisson’s ratio)anchor cable support is more suitable for the initial support stage of the super-large-span tunnels.The tunnel support theory,model test materials,methods,and the results obtained in this study could provide references for study of similar super-large-span tunnels。展开更多
This paper presents an experimental investigation focused on identifying the effects of cutting conditions and tool construction on the surface roughness and natural frequency in turning of AISI1045 steel. Machining e...This paper presents an experimental investigation focused on identifying the effects of cutting conditions and tool construction on the surface roughness and natural frequency in turning of AISI1045 steel. Machining experiments were carried out at the lathe using carbide cutting insert coated with TiC and two forms of cutting tools made of AISI 5140 steel. Three levels for spindle speed, depth of cut, feed rate and tool overhang were chosen as cutting variables. The Taguchi method L9 orthogonal array was applied to design of experiment. By the help of signal-to-noise ratio and analysis of variance, it was concluded that spindle speed has the significant effect on the surface roughness, while tool overhang is the dominant factor affecting natural frequency for both cutting tools. In addition, the optimum cutting conditions for surface roughness and natural frequency were found at different levels. Finally, confirmation experiments were conducted to verify the effectiveness and efficiency of the Taguchi method in optimizing the cutting parameters for surface roughness and natural frequency.展开更多
The copolymerizations of methyl acrylate （MA） with different N- arylmethacrylamide （N-ArMA） were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by;H...The copolymerizations of methyl acrylate （MA） with different N- arylmethacrylamide （N-ArMA） were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by;H NMR method. The monomer reactivity ratios were calculated by the Fineman-Ross （F-R） method. The reactivity ratios and the activity of various N-ArMA with MA were investigated.展开更多
An unsteady load calculation method for the support configuration of a monopile-supported offshore wind turbine is developed based on the Fluent software platform.Firstly,the water wave is generated by imposing the in...An unsteady load calculation method for the support configuration of a monopile-supported offshore wind turbine is developed based on the Fluent software platform.Firstly,the water wave is generated by imposing the inlet boundary conditions according to the exact potential flow solution.Then the wave evolution is simulated by solving the unsteady incompressible Navier-Stokes(N-S)equations coupled with the volume of fluid method.For the small amplitude wave with reasonable wave parameters,the numerical wave result agrees well with that of the given wave model.Finally,a monopile support configuration is introduced and a CFD-based load calculation method is established to accurately calculate the unsteady load under the combined action of wave and wind.The computed unsteady wave load on a small-size monopile support located in the small amplitude wave flow coincides with that of the Morison formula.The load calculations are also performed on a large-size monopile support and a monopile-supported offshore wind turbine under the combined action of small amplitude wave and wind.展开更多
Presents the new concept of ″Desired to be small″ based on the basic function of vehicle flight control system for an optimal design of flying vehicle control system, and the definition of S/N ratio and calculation ...Presents the new concept of ″Desired to be small″ based on the basic function of vehicle flight control system for an optimal design of flying vehicle control system, and the definition of S/N ratio and calculation formula for ″Desired to be small″ dynamic characteristics, and the S/N ratio method established for design of velicle flight control systems, by which, an orthogrnal table is used to arrange test schemes, and error facters are used to simulate various interferences, and the use of S/N ratio as a design criterion to synthesise the design of dynamic and static characteristics for definition of an optimal scheme, the application of S/N ratio method to the design of a type of vehicle control system and the single run success abtained in design of control system, technical evaluation test and design finalization flight test.展开更多
针对近连续流过渡区多尺度绕流问题,学界发展了N-S(Navier-Stokes)/DSMC(direct simulation Monte Carlo)耦合方法,大多数此类求解器面临着耦合界面波动失稳的难题,因此对复杂外形和耦合界面的通用性值得重点研究。鉴于非结构网格面向...针对近连续流过渡区多尺度绕流问题,学界发展了N-S(Navier-Stokes)/DSMC(direct simulation Monte Carlo)耦合方法,大多数此类求解器面临着耦合界面波动失稳的难题,因此对复杂外形和耦合界面的通用性值得重点研究。鉴于非结构网格面向复杂外形高度的贴体性、优良适应性以及工程领域对过渡流区高效通用型计算方法的需求,提出并实现了一套三维复杂界面四面体非结构网格N-S/DSMC耦合方法用于模拟高超声速过渡流。该方法使用局部克努森数作为连续失效参数划分连续/稀薄区域,并生成三维复杂N-S/DSMC耦合界面,沿分界面两侧分别推进一层或多层界面信息传递单元,基于边界状态法进行信息耦合。该耦合方法无需对复杂不规则分界面作光滑和修型处理,具备对复杂过渡流区工程问题数值模拟的通用性。分别对三维高超声速圆球和钝锥绕流进行模拟,数值结果显示:与参考文献中的DSMC方法相比,激波处数值和壁面特征值基本一致,最大误差不超过8%,但计算效率分别提高了1.74倍和2.28倍,验证了该耦合方法的正确性和高效性。展开更多
To find the optimized levels of various casting parameters in the ductile iron casting, various casting defects and the rejection rate were observed from a medium scale foundry. The controlled values of different cast...To find the optimized levels of various casting parameters in the ductile iron casting, various casting defects and the rejection rate were observed from a medium scale foundry. The controlled values of different casting parameters such as pouring temperature, inoculation, carbon equivalent, moisture content, green compression strength, permeability and mould hardness were selected. Three different melts of metal with 0.4wt.%, 0.6wt.%, and 0.8wt.% inoculation （Fe-Si-Mg alloy and post inoculant） were produced using a 1-ton capacity coreless medium frequency induction furnace. L-27 orthogonal array with 3-level settings were chosen for the analysis. Responses for each run were observed. The signal-to-noise （S/N） ratio for each run was calculated using the Taguchi approach, and the optimized levels of different casting parameters were identified based on the SIN ratio. The analysis of variance for the casting acceptance percentage concludes that inoculation is the most significant factor affecting the castings＇ quality with a contribution percentage of 44%; an increase in inoculation results in a significant improvement in acceptance percentage of ductile iron castings. The experiment results showed that with the optimized parameters, the rejection rate was reduced from 16.98% to 6.07%.展开更多
The seismic data from western China is very noisy. Two main reasons are static corrections and low S/N ratio problems. By seismic data processing and study these problems have been effectively solved by iterating the ...The seismic data from western China is very noisy. Two main reasons are static corrections and low S/N ratio problems. By seismic data processing and study these problems have been effectively solved by iterating the static corrections and improving the S/N ratio for pre-stack seismic data. Suppression and elimination of various other distortions has been implemented as well. Due to the fact that the S/N ratio is improved, the resolution of the seismic data is also improved.展开更多
Denitrification-induced nitrogen(N) losses from croplands may be greatly increased by intensive fertilization.However,the accurate quantification of these losses is still challenging due to insufficient available in s...Denitrification-induced nitrogen(N) losses from croplands may be greatly increased by intensive fertilization.However,the accurate quantification of these losses is still challenging due to insufficient available in situ measurements of soil dinitrogen(N) emissions.We carried out two one-week experiments in a maize-wheat cropping system with calcareous soil using theN gas-flux(NGF) method to measure in situ Nfluxes following urea application.Applications ofN-labeled urea(99 atom%,130-150 kg N ha) were followed by irrigation on the 1 st,3 rd,and 5 th days after fertilization(DAF 1,3,and 5,respectively).The detection limits of the soil Nfluxes were 163-1 565,81-485,and 54-281 μg N mhfor the two-,four-,and six-hour static chamber enclosures,respectively.The Nfluxes measured in 120 cases varied between 159 and 2 943(811 on average) μg N mh.which were higher than the detection limits,with the exception of only two cases.The Nfluxes at DAF 3 were significantly higher(by nearly 80%(P<0.01)) than those at DAF 1 and 5 in the maize experiment,while there were no significant differences among the irrigation times in the wheat experiment.The Nfluxes and the ratios of nitrous oxide(NO) to the NO plus Nfluxes following urea application to maize were approximately 65% and 11 times larger,respectively(P<0.01),than those following urea application to wheat.Such differences could be mainly attributed to the higher soil water contents,temperatures,and availability of soil N substrates in the maize experiment than in the wheat experiment.This study suggests that theNGF method is sensitive enough to measure in situ Nfluxes from intensively fertilized croplands with calcareous soils.展开更多
Using the quantitative error probability density method we studied the S/N ratio of alternately sampled signals digitized by a 4-channel A/D. A complete expression for the S/N ratio of a 4-channel A/D non-uniform samp...Using the quantitative error probability density method we studied the S/N ratio of alternately sampled signals digitized by a 4-channel A/D. A complete expression for the S/N ratio of a 4-channel A/D non-uniform sampling signal was deduced. First we obtained an expression for the S/N ratio of a 1-channel A/D uniform sampling signal when the sampling frequency was equal to or greater than 2 times the frequency of the sampled signal. Based on the S/N ratio of a 2-channel A/D,alternating,non-uniform sampling signal,we analyzed the distribution of quantitative error using the quantitative error probability density method and the distribution convolution formula. From this the S/N ratio expression of a 4-channel A/D sampling signal was deduced. The simulation result shows that the deduced expression is correct.展开更多
Black phosphorene(BP)and its analogs have attracted intensive attention due to their unique puckered structures,anisotropic characteristics,and negative Poisson’s ratio.The van der Waals(vdW)heterostructures assembly...Black phosphorene(BP)and its analogs have attracted intensive attention due to their unique puckered structures,anisotropic characteristics,and negative Poisson’s ratio.The van der Waals(vdW)heterostructures assembly by stacking different materials show novel physical properties,however,the parent materials do not possess.In this work,the first-principles calculations are performed to study the mechanical properties of the vdW heterostructure.Interestingly,a near-zero Poisson’s ratio ν_(zx)is found in BP/SnSe heterostructure.In addition,compared with the parent materials BP and SnSe with strong in-plane anisotropic mechanical properties,the BP/SnSe heterostructure shows strongly suppressed anisotropy.The results show that the vdW heterostructure has quite different mechanical properties compared with the parent materials,and provides new opportunities for the mechanical applications of the heterostructures.展开更多
2-D and 3-D micro-architectured multiphase thermoelastic metamaterials are designed and analyzed using a parametric level set method for topology optimization and the finite element method.An asymptotic homogenization...2-D and 3-D micro-architectured multiphase thermoelastic metamaterials are designed and analyzed using a parametric level set method for topology optimization and the finite element method.An asymptotic homogenization approach is employed to obtain the effective thermoelastic properties of the multiphase metamaterials.Theε-constraint multi-objective optimization method is adopted in the formulation.The coefficient of thermal expansion(CTE)and Poisson’s ratio(PR)are chosen as two objective functions,with the CTE optimized and the PR treated as a constraint.The optimization problems are solved by using the method of moving asymptotes.Effective isotropic and anisotropic CTEs and stiffness constants are obtained for the topologically optimized metamaterials with prescribed values of PR under the constraints of specified effective bulk modulus,volume fractions and material symmetry.Two solid materials along with one additional void phase are involved in each of the 2-D and 3-D optimal design examples.The numerical results reveal that the newly proposed approach can integrate shape and topology optimizations and lead to optimal microstructures with distinct topological boundaries.The current method can topologically optimize metamaterials with a positive,negative or zero CTE and a positive,negative or zero Poisson’s ratio.展开更多
An h-adaptive method is developed for high-order discontinuous Galerkin methods(DGM)to solve the laminar compressible Navier-Stokes(N-S)equations on unstructured mesh.The vorticity is regarded as the indicator of adap...An h-adaptive method is developed for high-order discontinuous Galerkin methods(DGM)to solve the laminar compressible Navier-Stokes(N-S)equations on unstructured mesh.The vorticity is regarded as the indicator of adaptivity.The elements where the vorticity is larger than a pre-defined upper limit are refined,and those where the vorticity is smaller than a pre-defined lower limit are coarsened if they have been refined.A high-order geometric approximation of curved boundaries is adopted to ensure the accuracy.Numerical results indicate that highly accurate numerical results can be obtained with the adaptive method at relatively low expense.展开更多
The traditional differential quadrature method was improved by using theupwind difference scheme for the convective terms to solve the coupled two-dimensionalincompressible Navier-stokes equations and heat equation. T...The traditional differential quadrature method was improved by using theupwind difference scheme for the convective terms to solve the coupled two-dimensionalincompressible Navier-stokes equations and heat equation. The new method was compared with theconventional differential quadrature method in the aspects of convergence and accuracy. The resultsshow that the new method is more accurate, and has better convergence than the conventionaldifferential quadrature method for numerically computing the steady-state solution.展开更多
The neutron yield in the12C(d,n)13N reaction and the proton yield in the12C(d,p)13C reaction have been measured using deuteron beams of energies 0.6-3 MeV.The deuteron beam is delivered from a 4-MeV electrostatic acce...The neutron yield in the12C(d,n)13N reaction and the proton yield in the12C(d,p)13C reaction have been measured using deuteron beams of energies 0.6-3 MeV.The deuteron beam is delivered from a 4-MeV electrostatic accelerator and bombarded on a thick carbon target.The neutrons are detected at 0°,24°,and 48°and the protons at135°in the laboratory frame.Further,the ratio of the neutron yield to the proton yield was calculated.This can be used to effectively recognize the resonances.The resonances are found at 1.4 MeV,1.7 MeV,and 2.5 MeV in the12C(d,p)13C reaction,and at 1.6 MeV and 2.7 MeV in the12C(d,n)13N reaction.The proposed method provides a way to reduce systematic uncertainty and helps confirm more resonances in compound nuclei.展开更多
It is important to improve the speed of a ship,the friction resistance can be reduced by injection air at the bottom of a ship when the ship is running on the water.As the first part of the studying project,here numer...It is important to improve the speed of a ship,the friction resistance can be reduced by injection air at the bottom of a ship when the ship is running on the water.As the first part of the studying project,here numerical simulation study method,boundary condition and governing equations are presented.It is easy to study complicated problems from simple conditions,so the program concerning boundary layer condition is compiled to solve the problem.Here the spectral method is introduced,and the results are tested by Dorod’s results.展开更多
基金supported by The National Key Research and Development Program Plane(No.2017YFC0601505)National Natural Science Foundation(No.41672325)Science&Technology Department of Sichuan Province Technology Project(No.2017GZ0393)
文摘The attenuation factor or quality factor(Q-factor or Q) has been used to measure the energy attenuation of seismic waves propagating in underground media. Many methods are used to estimate the Q-factor. We propose a method to calculate the Q-factor based on the prestack Q-factor inversion and the generalized S-transform. The proposed method specifies a standard primary wavelet and calculates the cumulative Q-factors; then, it finds the interlaminar Q-factors using the relation between Q and offset(QVO) and the Dix formula. The proposed method is alternative to methods that calculate interlaminar Q-factors after horizon picking. Because the frequency spectrum of each horizon can be extracted continuously on a 2D time–frequency spectrum, the method is called the continuous spectral ratio slope(CSRS) method. Compared with the other Q-inversion methods, the method offers nearly effortless computations and stability, and has mathematical and physical significance. We use numerical modeling to verify the feasibility of the method and apply it to real data from an oilfield in Ahdeb, Iraq. The results suggest that the resolution and spatial stability of the Q-profile are optimal and contain abundant interlaminar information that is extremely helpful in making lithology and fluid predictions.
基金supported by the Science Technology Talents Lifting Project of Hunan Province(No.2022TJ-N16)the Natural Science Foundation of Hunan Province(Nos.2024JJ4022,2023JJ30277,2025JJ60382)+3 种基金the China Postdoctoral Fellowship Program(GZC20233205)the Scientifc Research Fund of Hunan Provincial Education Department,China(No.24B0270)the National Natural Science Foundation of China(No.32201646)the Key Project of Jiangxi Provincial Research and Development Program(No.20243BBI91001).
文摘The development of high-performance transition metal sulfide(TMS)/carbon composites to replace conventional graphite anode remains a critical challenge for advancing lithium-ion batteries(LIBs).In this study,a facile self-sacrifice template method is developed to prepare FeS encapsulated into N,S co-doped carbon(FeS/NSC)composite using melamine-cyanuric acid(MCA)supermolecule as a multifunctional template precursor.The function of MCA supermolecule for material synthesis is explored,revealing its special function as a dispersant,dopant and pore-forming agent.Furthermore,the effect of Fe source dosage on the morphology,structure and composition of the final products is explored.The resultant FeS/NSC-0.1(where 0.1 represents the mass of added Fe source)exhibits the most optimal proportion,characterized by a good dispersion status of FeS within the NSC matrix,effective N,S co-doping and ample porosity.Benefiting from these merits,the FeS/NSC-0.1 anode demonstrates significantly improved cycling stability and rate capability when compared to the counterparts.Undoubtedly,this work offers a universal method to produce advanced transition metal sulfide/carbon composite electrodes for energy storage and conversion systems.
基金supported by the Innovation Fund Research Project of State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology(Grant No.SKLGDUEK202201)the Foundation for the Opening of State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology(Grant No.SKLGDUEK2129)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z020007)。
文摘In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult.Unfortunately,there are few studies on the failure and support mechanism of the surrounding rocks in the excavation of supported tunnel,while most model tests of super-large-span tunnels focus on the failure characteristics of surrounding rocks in tunnel excavation without supports.Based on excavation compensation method(ECM),model tests of a super-large-span tunnel excavation by different anchor cable support methods in the initial support stage were carried out.The results indicate that during excavation of super-large-span tunnel,the stress and displacement of the shallow surrounding rocks decrease,following a step-shape pattern,and the tunnel failure is mainly concentrated on the vault and spandrel areas.Compared with conventional anchor cable supports,the NPR(negative Poisson’s ratio)anchor cable support is more suitable for the initial support stage of the super-large-span tunnels.The tunnel support theory,model test materials,methods,and the results obtained in this study could provide references for study of similar super-large-span tunnels。
文摘This paper presents an experimental investigation focused on identifying the effects of cutting conditions and tool construction on the surface roughness and natural frequency in turning of AISI1045 steel. Machining experiments were carried out at the lathe using carbide cutting insert coated with TiC and two forms of cutting tools made of AISI 5140 steel. Three levels for spindle speed, depth of cut, feed rate and tool overhang were chosen as cutting variables. The Taguchi method L9 orthogonal array was applied to design of experiment. By the help of signal-to-noise ratio and analysis of variance, it was concluded that spindle speed has the significant effect on the surface roughness, while tool overhang is the dominant factor affecting natural frequency for both cutting tools. In addition, the optimum cutting conditions for surface roughness and natural frequency were found at different levels. Finally, confirmation experiments were conducted to verify the effectiveness and efficiency of the Taguchi method in optimizing the cutting parameters for surface roughness and natural frequency.
文摘The copolymerizations of methyl acrylate （MA） with different N- arylmethacrylamide （N-ArMA） were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by;H NMR method. The monomer reactivity ratios were calculated by the Fineman-Ross （F-R） method. The reactivity ratios and the activity of various N-ArMA with MA were investigated.
基金supported partly by the National Basic Research Program of China("973"Program)(No.2014CB046200)the National Natural Science Foundation of China(No.11372135)the NUAA Fundamental Research Funds(No.NS2013005)
文摘An unsteady load calculation method for the support configuration of a monopile-supported offshore wind turbine is developed based on the Fluent software platform.Firstly,the water wave is generated by imposing the inlet boundary conditions according to the exact potential flow solution.Then the wave evolution is simulated by solving the unsteady incompressible Navier-Stokes(N-S)equations coupled with the volume of fluid method.For the small amplitude wave with reasonable wave parameters,the numerical wave result agrees well with that of the given wave model.Finally,a monopile support configuration is introduced and a CFD-based load calculation method is established to accurately calculate the unsteady load under the combined action of wave and wind.The computed unsteady wave load on a small-size monopile support located in the small amplitude wave flow coincides with that of the Morison formula.The load calculations are also performed on a large-size monopile support and a monopile-supported offshore wind turbine under the combined action of small amplitude wave and wind.
文摘Presents the new concept of ″Desired to be small″ based on the basic function of vehicle flight control system for an optimal design of flying vehicle control system, and the definition of S/N ratio and calculation formula for ″Desired to be small″ dynamic characteristics, and the S/N ratio method established for design of velicle flight control systems, by which, an orthogrnal table is used to arrange test schemes, and error facters are used to simulate various interferences, and the use of S/N ratio as a design criterion to synthesise the design of dynamic and static characteristics for definition of an optimal scheme, the application of S/N ratio method to the design of a type of vehicle control system and the single run success abtained in design of control system, technical evaluation test and design finalization flight test.
文摘针对近连续流过渡区多尺度绕流问题,学界发展了N-S(Navier-Stokes)/DSMC(direct simulation Monte Carlo)耦合方法,大多数此类求解器面临着耦合界面波动失稳的难题,因此对复杂外形和耦合界面的通用性值得重点研究。鉴于非结构网格面向复杂外形高度的贴体性、优良适应性以及工程领域对过渡流区高效通用型计算方法的需求,提出并实现了一套三维复杂界面四面体非结构网格N-S/DSMC耦合方法用于模拟高超声速过渡流。该方法使用局部克努森数作为连续失效参数划分连续/稀薄区域,并生成三维复杂N-S/DSMC耦合界面,沿分界面两侧分别推进一层或多层界面信息传递单元,基于边界状态法进行信息耦合。该耦合方法无需对复杂不规则分界面作光滑和修型处理,具备对复杂过渡流区工程问题数值模拟的通用性。分别对三维高超声速圆球和钝锥绕流进行模拟,数值结果显示:与参考文献中的DSMC方法相比,激波处数值和壁面特征值基本一致,最大误差不超过8%,但计算效率分别提高了1.74倍和2.28倍,验证了该耦合方法的正确性和高效性。
文摘To find the optimized levels of various casting parameters in the ductile iron casting, various casting defects and the rejection rate were observed from a medium scale foundry. The controlled values of different casting parameters such as pouring temperature, inoculation, carbon equivalent, moisture content, green compression strength, permeability and mould hardness were selected. Three different melts of metal with 0.4wt.%, 0.6wt.%, and 0.8wt.% inoculation （Fe-Si-Mg alloy and post inoculant） were produced using a 1-ton capacity coreless medium frequency induction furnace. L-27 orthogonal array with 3-level settings were chosen for the analysis. Responses for each run were observed. The signal-to-noise （S/N） ratio for each run was calculated using the Taguchi approach, and the optimized levels of different casting parameters were identified based on the SIN ratio. The analysis of variance for the casting acceptance percentage concludes that inoculation is the most significant factor affecting the castings＇ quality with a contribution percentage of 44%; an increase in inoculation results in a significant improvement in acceptance percentage of ductile iron castings. The experiment results showed that with the optimized parameters, the rejection rate was reduced from 16.98% to 6.07%.
文摘The seismic data from western China is very noisy. Two main reasons are static corrections and low S/N ratio problems. By seismic data processing and study these problems have been effectively solved by iterating the static corrections and improving the S/N ratio for pre-stack seismic data. Suppression and elimination of various other distortions has been implemented as well. Due to the fact that the S/N ratio is improved, the resolution of the seismic data is also improved.
基金jointly supported by the National Natural Science Foundation of China(41877333,41830751 and 41761144054)the Basic Research Program of Frontier Sciences of Chinese Academy of Sciences(ZDBSLY-DQCOO7)the National Key Research and Development Program of China(2017YFD0200100)。
文摘Denitrification-induced nitrogen(N) losses from croplands may be greatly increased by intensive fertilization.However,the accurate quantification of these losses is still challenging due to insufficient available in situ measurements of soil dinitrogen(N) emissions.We carried out two one-week experiments in a maize-wheat cropping system with calcareous soil using theN gas-flux(NGF) method to measure in situ Nfluxes following urea application.Applications ofN-labeled urea(99 atom%,130-150 kg N ha) were followed by irrigation on the 1 st,3 rd,and 5 th days after fertilization(DAF 1,3,and 5,respectively).The detection limits of the soil Nfluxes were 163-1 565,81-485,and 54-281 μg N mhfor the two-,four-,and six-hour static chamber enclosures,respectively.The Nfluxes measured in 120 cases varied between 159 and 2 943(811 on average) μg N mh.which were higher than the detection limits,with the exception of only two cases.The Nfluxes at DAF 3 were significantly higher(by nearly 80%(P<0.01)) than those at DAF 1 and 5 in the maize experiment,while there were no significant differences among the irrigation times in the wheat experiment.The Nfluxes and the ratios of nitrous oxide(NO) to the NO plus Nfluxes following urea application to maize were approximately 65% and 11 times larger,respectively(P<0.01),than those following urea application to wheat.Such differences could be mainly attributed to the higher soil water contents,temperatures,and availability of soil N substrates in the maize experiment than in the wheat experiment.This study suggests that theNGF method is sensitive enough to measure in situ Nfluxes from intensively fertilized croplands with calcareous soils.
基金Projects 07KJZ11 supported by the President Fund of Xuzhou Medical School07KJB310117 by the Education Department of Jiangsu Province
文摘Using the quantitative error probability density method we studied the S/N ratio of alternately sampled signals digitized by a 4-channel A/D. A complete expression for the S/N ratio of a 4-channel A/D non-uniform sampling signal was deduced. First we obtained an expression for the S/N ratio of a 1-channel A/D uniform sampling signal when the sampling frequency was equal to or greater than 2 times the frequency of the sampled signal. Based on the S/N ratio of a 2-channel A/D,alternating,non-uniform sampling signal,we analyzed the distribution of quantitative error using the quantitative error probability density method and the distribution convolution formula. From this the S/N ratio expression of a 4-channel A/D sampling signal was deduced. The simulation result shows that the deduced expression is correct.
基金Project supported by the National Natural Science Foundation of China(Nos.11572040 and92163101)the National Key Research and Development Program of China(No.2019YFA0307900)the Beijing Natural Science Foundation(No.Z190011)。
文摘Black phosphorene(BP)and its analogs have attracted intensive attention due to their unique puckered structures,anisotropic characteristics,and negative Poisson’s ratio.The van der Waals(vdW)heterostructures assembly by stacking different materials show novel physical properties,however,the parent materials do not possess.In this work,the first-principles calculations are performed to study the mechanical properties of the vdW heterostructure.Interestingly,a near-zero Poisson’s ratio ν_(zx)is found in BP/SnSe heterostructure.In addition,compared with the parent materials BP and SnSe with strong in-plane anisotropic mechanical properties,the BP/SnSe heterostructure shows strongly suppressed anisotropy.The results show that the vdW heterostructure has quite different mechanical properties compared with the parent materials,and provides new opportunities for the mechanical applications of the heterostructures.
文摘2-D and 3-D micro-architectured multiphase thermoelastic metamaterials are designed and analyzed using a parametric level set method for topology optimization and the finite element method.An asymptotic homogenization approach is employed to obtain the effective thermoelastic properties of the multiphase metamaterials.Theε-constraint multi-objective optimization method is adopted in the formulation.The coefficient of thermal expansion(CTE)and Poisson’s ratio(PR)are chosen as two objective functions,with the CTE optimized and the PR treated as a constraint.The optimization problems are solved by using the method of moving asymptotes.Effective isotropic and anisotropic CTEs and stiffness constants are obtained for the topologically optimized metamaterials with prescribed values of PR under the constraints of specified effective bulk modulus,volume fractions and material symmetry.Two solid materials along with one additional void phase are involved in each of the 2-D and 3-D optimal design examples.The numerical results reveal that the newly proposed approach can integrate shape and topology optimizations and lead to optimal microstructures with distinct topological boundaries.The current method can topologically optimize metamaterials with a positive,negative or zero CTE and a positive,negative or zero Poisson’s ratio.
基金supported by the National Natural Science Foundation of China(11272152)
文摘An h-adaptive method is developed for high-order discontinuous Galerkin methods(DGM)to solve the laminar compressible Navier-Stokes(N-S)equations on unstructured mesh.The vorticity is regarded as the indicator of adaptivity.The elements where the vorticity is larger than a pre-defined upper limit are refined,and those where the vorticity is smaller than a pre-defined lower limit are coarsened if they have been refined.A high-order geometric approximation of curved boundaries is adopted to ensure the accuracy.Numerical results indicate that highly accurate numerical results can be obtained with the adaptive method at relatively low expense.
文摘The traditional differential quadrature method was improved by using theupwind difference scheme for the convective terms to solve the coupled two-dimensionalincompressible Navier-stokes equations and heat equation. The new method was compared with theconventional differential quadrature method in the aspects of convergence and accuracy. The resultsshow that the new method is more accurate, and has better convergence than the conventionaldifferential quadrature method for numerically computing the steady-state solution.
基金partially supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Nos.XDB16 and XDPB09)the National Natural Science Foundation of China(Nos.11890714 and 11421505)the Key Research Program of Frontier Sciences of the CAS(No.QYZDJ-SSW-SLH002)
文摘The neutron yield in the12C(d,n)13N reaction and the proton yield in the12C(d,p)13C reaction have been measured using deuteron beams of energies 0.6-3 MeV.The deuteron beam is delivered from a 4-MeV electrostatic accelerator and bombarded on a thick carbon target.The neutrons are detected at 0°,24°,and 48°and the protons at135°in the laboratory frame.Further,the ratio of the neutron yield to the proton yield was calculated.This can be used to effectively recognize the resonances.The resonances are found at 1.4 MeV,1.7 MeV,and 2.5 MeV in the12C(d,p)13C reaction,and at 1.6 MeV and 2.7 MeV in the12C(d,n)13N reaction.The proposed method provides a way to reduce systematic uncertainty and helps confirm more resonances in compound nuclei.
文摘It is important to improve the speed of a ship,the friction resistance can be reduced by injection air at the bottom of a ship when the ship is running on the water.As the first part of the studying project,here numerical simulation study method,boundary condition and governing equations are presented.It is easy to study complicated problems from simple conditions,so the program concerning boundary layer condition is compiled to solve the problem.Here the spectral method is introduced,and the results are tested by Dorod’s results.
