Dry rubber content(DRC)is an important factor to be considered in evaluating the quality of cup lump rubber.The DRC analysis requires prolonged laboratory validation.To develop fast and effective DRC determination met...Dry rubber content(DRC)is an important factor to be considered in evaluating the quality of cup lump rubber.The DRC analysis requires prolonged laboratory validation.To develop fast and effective DRC determination methods,this study proposed methods to evaluate the DRC of cup lump rubber using different spectroscopic measurement approaches.This involved a complete fundamental analysis leading to an efficient measurement method based on either point-based measurement using NIR reflectance spectrometer or area-based measurement using hyperspectral imaging.A dataset was prepared that 120 samples were randomly divided into a calibration set of 90 samples and a validation set of 30 samples.To obtain an average spectrum to represent a cup lump rubber sample,the spectral data were collected by locating and scanning for point-based and area-based measurement,respectively.The spectral data were calibrated using partial least squares regression(PLSR)and the least-squares support vector machine(LS-SVM)methods against the reference values.The experiments showed that the area-based measurement approach with both algorithms performed outstandingly in predicting the DRC of cup lump rubber and was clearly better than the point-based measurement approach.The best predictions of PLSR represented by the coefficient of determination(R2),the root mean square error of prediction(RMSEP)and the residual predictive deviation(RPD)were 0.99,0.72%and 15.17,while the best prediction of LS-SVM were 0.99,0.64%and 16.83,respectively.In summary,the area-based measurement based on the LS-SVM prediction model provided a highly accurate estimate of the DRC of cup lump rubber.展开更多
ARHM asphalt rubber has been applied in pavement engineering research for more than 20 years in our country. It has been applied and popularized in Beijing-Qinhuangdao Expressway, Jinshi Expressway and other projects ...ARHM asphalt rubber has been applied in pavement engineering research for more than 20 years in our country. It has been applied and popularized in Beijing-Qinhuangdao Expressway, Jinshi Expressway and other projects successively, but its content is relatively low. According to the characteristics that rubber powder can greatly improve the durability of asphalt concrete, the research on the mix proportion of high content (30%) rubber powder asphalt concrete was carried out. It has been verified that it has significantly improved the dynamic stability, low-temperature bending, freeze-thaw splitting and water seepage performance, and has been put into use in the bid section ZT2 of Jingde Expressway, meeting the use requirements of "no minor repair for 15 years and no major repair for 40 years" for the permanent pavement of Jingde Expressway.展开更多
This work focuses on the development of carpets from sand, fabrics of cotton fiber and mosquito nets and rubber latex. Following a study on the choice of the best formulations, the quantity of rubber latex used for sh...This work focuses on the development of carpets from sand, fabrics of cotton fiber and mosquito nets and rubber latex. Following a study on the choice of the best formulations, the quantity of rubber latex used for shaping varies between 14% and 18% (latex/sand + latex ratio) for the carpet with the fabric of mosquito nets and between 16% and 18% for the one made with the fabric of cotton fiber. Thus, with a mixture of sand, fiber fabrics (cotton and mosquito nets) and rubber latex, carpets were developed. In addition, the wear test carried out on these samples indicates that it is possible to produce carpets with the new material made of rubber sand and latex: SABLATEX At room temperature. Following the characterization test, it resorts to only 16% latex with cotton fiber fabric, allowing to have carpets with good mechanical characteristics.展开更多
The impact of four spacing of cooking banana (CB) within the immature rubber avenues on some soil fertility attributes, maturity rate of rubber trees and dry rubber content (DRC) during the initial six years after pla...The impact of four spacing of cooking banana (CB) within the immature rubber avenues on some soil fertility attributes, maturity rate of rubber trees and dry rubber content (DRC) during the initial six years after planting (YAP) were evaluated in a humid forest area of South Eastern Nigeria relative to sole rubber. The CB spacings within immature rubber avenues were 6.7 × 3.4 m;4.0 × 2.0 m, 3.0 × 3.0 m and 2.0 × 2.0 m, while the sole rubber was at 6.7 × 3.4 m, all laid out in randomized complete block design with five replications. Quantities of soil organic C, extractable P, Ca, Mg and earthworm activities were significantly higher in the intercrops, with the highest value coming from the 4 × 2 m CB spaced plots. However a significantly higher value of K stock was observed in the sole rubber plot and declined as the CB spacing narrowed. While the highest proportion (>90%) of matured hevea tree at six YAP was observed in the 2 × 2 m CB spaced plots;the highest DRC of 1.7 t?ha–1?yr–1 was obtained from CB 4 × 2 m treatment. Consequently, with some of the observed soil fertility attributes and DRC recorded, 4 × 2 m CB spacing seems to be a more suitable CB spacings within immature rubber avenues, especially in view of the levels of K in the 2 × 2 CB plots.展开更多
Rural area in Indonesia of which electrification ratio is still low has a strong demand for off-grid electric power supply. On the other hand, Indonesia is a leading natural rubber production country and these rubber ...Rural area in Indonesia of which electrification ratio is still low has a strong demand for off-grid electric power supply. On the other hand, Indonesia is a leading natural rubber production country and these rubber wood trees are cultivated in vast plantation farms. A rubber wood tree is woody biomass resource which can be stably supplied because a lot of trees aged more than 25 years are logged and nursery trees are planted constantly. Woody biomass is burned directly as solid fuel and the generated thermal energy can be applied only for room heating or cooking. Otherwise, direct conversion of biomass to electric energy requires a large scale equipment such as a boiler and a steam turbine, whereas gasified woody biomass can be easily handled and can have wide application. A closed gasifier chamber which was kept vacuum and fulfilled with gas yield during gasification was recently developed by the authors for indirect gasification. It was confirmed that generated gas by the gasifier is clean and can be directly used to drive an engine generator to supply electricity. In this study, planer dust of rubber wood is used as gasification feedstock for indirect gasifying in the closed gasifier chamber, and effects of heating temperature and moisture content on gasification performance are discussed to examine characteristics of the closed gasifier chamber in details.展开更多
基金The authors acknowledge the financial support and a research grant provided by the Thailand Research Fund (TRF) and the Faculty of Engineering at Kamphaeng Saen, Kasetsart University, Thailand.
文摘Dry rubber content(DRC)is an important factor to be considered in evaluating the quality of cup lump rubber.The DRC analysis requires prolonged laboratory validation.To develop fast and effective DRC determination methods,this study proposed methods to evaluate the DRC of cup lump rubber using different spectroscopic measurement approaches.This involved a complete fundamental analysis leading to an efficient measurement method based on either point-based measurement using NIR reflectance spectrometer or area-based measurement using hyperspectral imaging.A dataset was prepared that 120 samples were randomly divided into a calibration set of 90 samples and a validation set of 30 samples.To obtain an average spectrum to represent a cup lump rubber sample,the spectral data were collected by locating and scanning for point-based and area-based measurement,respectively.The spectral data were calibrated using partial least squares regression(PLSR)and the least-squares support vector machine(LS-SVM)methods against the reference values.The experiments showed that the area-based measurement approach with both algorithms performed outstandingly in predicting the DRC of cup lump rubber and was clearly better than the point-based measurement approach.The best predictions of PLSR represented by the coefficient of determination(R2),the root mean square error of prediction(RMSEP)and the residual predictive deviation(RPD)were 0.99,0.72%and 15.17,while the best prediction of LS-SVM were 0.99,0.64%and 16.83,respectively.In summary,the area-based measurement based on the LS-SVM prediction model provided a highly accurate estimate of the DRC of cup lump rubber.
文摘ARHM asphalt rubber has been applied in pavement engineering research for more than 20 years in our country. It has been applied and popularized in Beijing-Qinhuangdao Expressway, Jinshi Expressway and other projects successively, but its content is relatively low. According to the characteristics that rubber powder can greatly improve the durability of asphalt concrete, the research on the mix proportion of high content (30%) rubber powder asphalt concrete was carried out. It has been verified that it has significantly improved the dynamic stability, low-temperature bending, freeze-thaw splitting and water seepage performance, and has been put into use in the bid section ZT2 of Jingde Expressway, meeting the use requirements of "no minor repair for 15 years and no major repair for 40 years" for the permanent pavement of Jingde Expressway.
文摘This work focuses on the development of carpets from sand, fabrics of cotton fiber and mosquito nets and rubber latex. Following a study on the choice of the best formulations, the quantity of rubber latex used for shaping varies between 14% and 18% (latex/sand + latex ratio) for the carpet with the fabric of mosquito nets and between 16% and 18% for the one made with the fabric of cotton fiber. Thus, with a mixture of sand, fiber fabrics (cotton and mosquito nets) and rubber latex, carpets were developed. In addition, the wear test carried out on these samples indicates that it is possible to produce carpets with the new material made of rubber sand and latex: SABLATEX At room temperature. Following the characterization test, it resorts to only 16% latex with cotton fiber fabric, allowing to have carpets with good mechanical characteristics.
文摘The impact of four spacing of cooking banana (CB) within the immature rubber avenues on some soil fertility attributes, maturity rate of rubber trees and dry rubber content (DRC) during the initial six years after planting (YAP) were evaluated in a humid forest area of South Eastern Nigeria relative to sole rubber. The CB spacings within immature rubber avenues were 6.7 × 3.4 m;4.0 × 2.0 m, 3.0 × 3.0 m and 2.0 × 2.0 m, while the sole rubber was at 6.7 × 3.4 m, all laid out in randomized complete block design with five replications. Quantities of soil organic C, extractable P, Ca, Mg and earthworm activities were significantly higher in the intercrops, with the highest value coming from the 4 × 2 m CB spaced plots. However a significantly higher value of K stock was observed in the sole rubber plot and declined as the CB spacing narrowed. While the highest proportion (>90%) of matured hevea tree at six YAP was observed in the 2 × 2 m CB spaced plots;the highest DRC of 1.7 t?ha–1?yr–1 was obtained from CB 4 × 2 m treatment. Consequently, with some of the observed soil fertility attributes and DRC recorded, 4 × 2 m CB spacing seems to be a more suitable CB spacings within immature rubber avenues, especially in view of the levels of K in the 2 × 2 CB plots.
文摘Rural area in Indonesia of which electrification ratio is still low has a strong demand for off-grid electric power supply. On the other hand, Indonesia is a leading natural rubber production country and these rubber wood trees are cultivated in vast plantation farms. A rubber wood tree is woody biomass resource which can be stably supplied because a lot of trees aged more than 25 years are logged and nursery trees are planted constantly. Woody biomass is burned directly as solid fuel and the generated thermal energy can be applied only for room heating or cooking. Otherwise, direct conversion of biomass to electric energy requires a large scale equipment such as a boiler and a steam turbine, whereas gasified woody biomass can be easily handled and can have wide application. A closed gasifier chamber which was kept vacuum and fulfilled with gas yield during gasification was recently developed by the authors for indirect gasification. It was confirmed that generated gas by the gasifier is clean and can be directly used to drive an engine generator to supply electricity. In this study, planer dust of rubber wood is used as gasification feedstock for indirect gasifying in the closed gasifier chamber, and effects of heating temperature and moisture content on gasification performance are discussed to examine characteristics of the closed gasifier chamber in details.
