Series of carbon nanotube supported Ru-based catalysts were prepared by impregnation method and applied successfully for complete removal of CO by CO selective methanation from H2-rich gas stream conducted in a fixed-...Series of carbon nanotube supported Ru-based catalysts were prepared by impregnation method and applied successfully for complete removal of CO by CO selective methanation from H2-rich gas stream conducted in a fixed-bed quartz tubular reactor at ambient pressure. It was found that the metal promoter, reduction temperature and metal loading affected the catalytic properties significantly. The most excellent performance was presented by 30 wt% Ru-Zr/CNTs catalyst reduced at 350 ℃. Since it decreased CO concentration to below 10 ppm from 12000 ppm by CO selective methanation at the temperature range of 180-240 ℃, and kept CO selectivity higher than 85% at the temperature below 200 ℃. Characterization using XRD, TEM, H2-TPR and XPS suggests that Zr modification of Ru/CNTs results in the weakening of the interaction between Ru and CNTs, a higher Ru dispersion and the oxidization of surface Ru. Amorphous and high dispersed Ru particles with small size were obtained for 30 wt% Ru-Zr/CNTs catalyst reduced at 350 ℃, leading to excellent catalytic performance in CO selective methanation.展开更多
The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was cha...The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.展开更多
A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS...A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.展开更多
Oxygen evolution reaction(OER)is a kinetically harsh four-electron anode reaction that requires a large overpotential to provide current and is of great importance in renewable electrochemical technique.Ir/Rubased per...Oxygen evolution reaction(OER)is a kinetically harsh four-electron anode reaction that requires a large overpotential to provide current and is of great importance in renewable electrochemical technique.Ir/Rubased perovskite oxides hold great significance for application as OER electrocatalysts,due to that their multimetal-oxide forms can reduce the use of noble metals,and their compositional tunability can modulate the electronic structure and optimize OER performance.However,high operating potentials and corrosive environments pose a serious challenge to the development of durable Ir-based and Ru-based perovskite electrocatalysts.Tremendous efforts have been dedicated to improving the Ir/Ru-based perovskite activity to enhance the efficiency;however,progress in improving the durability of Ir/Ru-based perovskite electrocatalysts has been rather limited.In this review,the recent research progress of Ir/Ru-based perovskites is reviewed from the perspective of heteroatom doping,structural modulation,and formation of heterostructures.The dissolution mechanism studies of Ir/Ru and experimental attempts to improve the durability of Ir/Ru-based perovskite electrocatalysts are discussed.Challenges and outlooks for further developing Ru-and Irbased perovskite oxygen electrocatalysts are also presented.展开更多
The fundamental insights of the reaction mechanism,especially the synergistic effect between oxygen vacancies and basic sites,are highly promising yet challenging for Ru-based catalysts during carbon dioxide(CO_(2))me...The fundamental insights of the reaction mechanism,especially the synergistic effect between oxygen vacancies and basic sites,are highly promising yet challenging for Ru-based catalysts during carbon dioxide(CO_(2))methanation.Herein,a series of Rubased catalysts were employed to study the mechanism of CO_(2) methanation.It is found that Ru/CeO_(2) catalyst exhibits a much higher CO_(2) conversion(86%)and CH4 selectivity(100%),as well as excellent stability of 30 h due to the existence of abundant oxygen vacancies and weak basic sites.Additionally,the in-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)calculations reveal that the formate formation step dominated the hydrogenation route on Ru/CeO_(2) catalyst,and the b-HCOO^(*)could be the key intermediate due to b-HCOO^(*)is more easily hydrogenated to methane than m-HCOO^(*).The systematic study marks the significance of precise tailoring of the synergistic relationship between oxygen vacancies and basic sites for achieving the desired performance in CO_(2) methanation.展开更多
The effects of promoters K, Ba, Sm on the chemisorption and desorption of hydrogen and nitrogen, dispersion of metallic Ru. and catalytic activity of active carbon (AC) supported ruthenium catalyst for ammonia synthes...The effects of promoters K, Ba, Sm on the chemisorption and desorption of hydrogen and nitrogen, dispersion of metallic Ru. and catalytic activity of active carbon (AC) supported ruthenium catalyst for ammonia synthesis have been studied by means of pulse chromatography, temperature-programmed desorption, and activity test. Promoters K, Ba and Sm increased the activity of Ru/AC catalysts for ammonia synthesis significantly, and particularly, potassium exhibited the best promotion on the activity because of the strong electronic donation to metallic Ru. Much higher activity can be obtained for Ru/AC catalyst with binary or triple promoters. The activity of Ru/AC catalyst is dependent on the adsorption of hydrogen and nitrogen. The high activity of catalyst could be ascribed to strong dissociation of nitrogen on the catalyst surface. Strong adsorption of hydrogen would inhibit the adsorption of nitrogen, resulted in decrease of the catalytic activity. Ru/AC catalyst promoted by Sm2O3 shows the best dispersion of metallic Ru, since the partly reduced SmOx on the surface modifies the morphology of active sites and favors the dispersion of metallic Ru. The activity of Ru/AC catalysts is in accordance to the corresponding amount of nitrogen chemisorption and the desorption activation energy of nitrogen. The desorption activation energy for nitrogen decreases in the order of Ru>Ru-Ba>Ru-Sm>Ru-Ba-Sm>Ru-K>Ru-K-Sm>Ru-K-Ba>Ru-K-Ba-Sm, just opposite to the order of catalytic activity, suggesting that the ammonia synthesis over Ru-based catalyst is controlled by the step of dissociation of nitrogen.展开更多
Water electrolysis using proton-exchange membranes is one of the most promising technologies for carbon-neutral and sustainable energy production.Generally,the overall efficiency of water splitting is limited by the o...Water electrolysis using proton-exchange membranes is one of the most promising technologies for carbon-neutral and sustainable energy production.Generally,the overall efficiency of water splitting is limited by the oxygen evolution reaction(OER).Nevertheless,a trade-off between activity and stability exists for most electrocatalytic materials in strong acids and oxidizing media,and the development of efficient and stable catalytic materials has been an important focus of research.In this view,gaining in-depth insights into the OER system,particularly the interactions between reaction intermediates and active sites,is significantly important.To this end,this review introduces the fundamentals of the OER over Ru-based materials,including the conventional adsorbate evolution mechanism,lattice oxygen oxidation mechanism,and oxide path mechanism.Moreover,the up-to-date progress of representative modifications for improving OER performance is further discussed with reference to specific mechanisms,such as tuning of geometric,electronic structures,incorporation of proton acceptors,and optimization of metal-oxygen covalency.Finally,some valuable insights into the challenges and opportunities for OER electrocatalysts are provided with the aim to promote the development of next-generation catalysts with high activity and excellent stability.展开更多
S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB...S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.展开更多
The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation...The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation of CO_(2)to produce marketable carbon-based products like methanol and ethanol is a practical approach that offers great potential to reduce CO_(2)emissions.Although significant volumes of methanol are currently produced from CO_(2),developing highly efficient and stable catalysts is crucial for further enhancing conversion and selectivity,thereby reducing process costs.An in-depth examination of the differences and similarities in the reaction pathways for methanol and ethanol production highlights the key factors that drive C-C coupling.Identifying these factors guides us toward developing more effective catalysts for ethanol synthesis.In this paper,we explore how different catalysts,through the production of various intermediates,can initiate the synthesis of methanol or ethanol.The catalytic mechanisms proposed by spectroscopic techniques and theoretical calculations,including operando X-ray methods,FTIR analysis,and DFT calculations,are summarized and presented.The following discussion explores the structural properties and composition of catalysts that influence C-C coupling and optimize the conversion rate of CO_(2)into ethanol.Lastly,the review examines recent catalysts employed for selective methanol and ethanol production,focusing on single-atom catalysts.展开更多
The efficient hydrogenolysis of esters to alkanes is the key protocol for producing advanced biofuels from renewable plant oils or fats.Due to the low reactivity of the carbonyl group in esters,a high reaction tempera...The efficient hydrogenolysis of esters to alkanes is the key protocol for producing advanced biofuels from renewable plant oils or fats.Due to the low reactivity of the carbonyl group in esters,a high reaction temperature(>250℃)is the prerequisite to ensure high conversion of esters.Here,we report a highly dispersed MoO_(x)-Ru/C bimetallic catalyst for the efficient hydrogenolysis of esters to alkanes under 150°C.The optimal catalyst exhibits>99%conversion of methyl stearate and 99%selectivity to diesel-range alkanes,reaching a high rate of up to 2.0 mmol gcat^(–1)h^(–1),5 times higher than that of Ru/C catalyst(MoO_(x)/C is inert).Integrated experimental and theoretical investigations attribute the high performance to the abundant MoO_(x)-Ru interfacial sites on the catalyst surface,which offers high activity for the C–O cleavage of esters.Furthermore,the dispersed MoO_(x)species significantly weaken the hydrocracking activity of the metallic Ru for C–C bonds,thus yielding alkane products without carbon loss.This study provides a facile and novel strategy for the design of high-performance heterogeneous catalysts for the hydrodeoxygenation of biomass-derived esters to alkane products.展开更多
To improve the catalytic performance of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)towards carbon soot,we utilized the impregnation method to incorporate Ag into the prepared LSCF catalyst.We conducted a series of cha...To improve the catalytic performance of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)towards carbon soot,we utilized the impregnation method to incorporate Ag into the prepared LSCF catalyst.We conducted a series of characterization tests and evaluated the soot catalytic activity of the composite catalyst by comparing it with the LaCoO_(3) group,LaFeO_(3) group,and catalyst-free group.The results indicate that the Ag-LSCF composite catalyst exhibits the highest soot catalytic activity,with the characteristic temperature values of 376.3,431.1,and 473.9℃at 10%,50%,and 90%carbon soot conversion,respectively.These values are 24.8,20.2,and 23.1℃lower than those of the LSCF group.This also shows that LSCF can improve the catalytic activity of soot after compounding with Ag,and reflects the necessity of using catalysts in soot combustion reaction.XPS characterization and BET test show that Ag-LSCF has more abundant surface-adsorbed oxygen species,larger specific surface area and pore volume than LSCF,which also proves that Ag-LSCF has higher soot catalytic activity.展开更多
Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-perform...Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-performance biomass-derived ORR catalysts with an asymmetric Fe-N_(3)P configuration was prepared by a simple pyrolysis-etching technique,where carboxymethyl cellulose(CMC)was used as the carbon source,urea and 1,10-phenanthroline iron complex(FePhen)as additives,and Na_(3)PO_(4)as the phosphorus dopant and a pore-forming agent.The CMC-derived FeNPC catalyst displayed a large specific area(BET:1235 m^(2)g^(-1))with atomically dispersed Fe-N_(3)P active sites,which exhibited superior ORR activity and stability in alkaline solution(E_(1/2)=0.90 V vs.RHE)and Zn-air batteries(P_(max)=149 mW cm^(-2))to commercial Pt/C catalyst(E_(1/2)=0.87 V,P_(max)=118 mW cm^(-2))under similar experimental conditions.This work provides a feasible and costeffective route toward highly efficient ORR catalysts and their application to Zn-air batteries for energy conversion.展开更多
NH_(3)-SCR(SCR:Selective catalytic reduction)is an effective technology for the de-NO_(x)process from both mobile and stationary pollution sources,and the most commonly used catalysts are the vanadia-based catalysts.A...NH_(3)-SCR(SCR:Selective catalytic reduction)is an effective technology for the de-NO_(x)process from both mobile and stationary pollution sources,and the most commonly used catalysts are the vanadia-based catalysts.An innovative V_(2)O_(5)-CeO_(2)/TaTiO_(x)catalyst for NO_(x)removal was prepared in this study.The influences of Ce and Ta in the V_(2)O_(5)-CeO_(2)/TaTiO_(x)catalyst on the SCR performance and physicochemical properties were investigated.The V_(2)O_(5)-CeO_(2)/TaTiO_(x)catalyst not only exhibited excellent SCR activity in a wide temperature window,but also presented strong resistance to H_(2)Oand SO_(2)at 275◦C.A series of characterizationmethods was used to study the catalysts,including H2-temperature programmed reduction,X-ray photoelectron spectroscopy,NH_(3)-temperature programmed desorption,etc.It was discovered that a synergistic effect existed between Ce and Ta species.The introduction of Ce and Ta enlarged the specific surface area,increased the amount of acid sites and the ratio of Ce^(3+),(V^(3+)+V^(4+))and Oα,and strengthened the redox capability which were related to synergistic effect between Ce and Ta species,significantly improving the NH_(3)-SCR activity.展开更多
Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3...Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3)Fe oxide/PANI)with a robust hetero-interface,which significantly improves oxygen evolution activities with an overpotential of 270 mV at 10 mA cm^(-2)and specific activity of 2.08 mA cm_(ECSA)^(-2)at overpotential of 300 mV,3.84-fold that of Ni_(3)Fe oxide.It is revealed that the catalyst–support interaction between Ni_(3)Fe oxide and PANI support enhances the Ni–O covalency via the interfacial Ni–N bond,thus promoting the charge and mass transfer on Ni_(3)Fe oxide.Considering the excellent activity and stability,rechargeable Zn-air batteries with optimum Ni_(3)Fe oxide/PANI are assembled,delivering a low charge voltage of 1.95 V to cycle for 400 h at 10 mA cm^(-2).The regulation of the effect of catalyst–support interaction on catalytic activity provides new possibilities for the future design of highly efficient OER catalysts.展开更多
Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal int...Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in AEMWEs.Herein,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work.Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER performance.More critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.展开更多
Transformation of urea and glycerol to glycerol carbonate is an environmental friendly and economical process.Catalysts play an indispensable role in the process.Although many catalysts have been developed,the perform...Transformation of urea and glycerol to glycerol carbonate is an environmental friendly and economical process.Catalysts play an indispensable role in the process.Although many catalysts have been developed,the performance of the catalysts still cannot meet the needs of industrialization.In this paper,research progress of the homogeneous and heterogeneous catalysts of the reaction over the past 20 years were reviewed systematically.According to the types and active centers of catalysts,the catalysts were classified systematically and analyzed in detail.The typical reaction mechanisms were also summarized.The research and development direction of catalysts is made more explicit through systematic classification and mechanism analysis.The article reveals more novel catalysts have been designed and used for the reaction,such as mixed metal oxides with special structures,solid wastes and non-metallic materials.This work summarized the current state of research and prospected possible routes for design of novel catalysts.It is hoped that this review can provide some references for developing efficient catalysts.展开更多
The current single-atom catalysts(SACs)for medicine still suffer from the limited active site density.Here,we develop a synthetic method capable of increasing both the metal loading and mass-specific activity of SACs ...The current single-atom catalysts(SACs)for medicine still suffer from the limited active site density.Here,we develop a synthetic method capable of increasing both the metal loading and mass-specific activity of SACs by exchanging zinc with iron.The constructed iron SACs(h^(3)-FNC)with a high metal loading of 6.27 wt%and an optimized adjacent Fe distance of~4 A exhibit excellent oxidase-like catalytic performance without significant activity decay after being stored for six months and promising antibacterial effects.Attractively,a“density effect”has been found at a high-enough metal doping amount,at which individual active sites become close enough to interact with each other and alter the electronic structure,resulting in significantly boosted intrinsic activity of single-atomic iron sites in h^(3)-FNCs by 2.3 times compared to low-and medium-loading SACs.Consequently,the overall catalytic activity of h^(3)-FNC is highly improved,with mass activity and metal mass-specific activity that are,respectively,66 and 315 times higher than those of commercial Pt/C.In addition,h^(3)-FNCs demonstrate efficiently enhanced capability in catalyzing oxygen reduction into superoxide anion(O_(2)·^(−))and glutathione(GSH)depletion.Both in vitro and in vivo assays demonstrate the superior antibacterial efficacy of h^(3)-FNCs in promoting wound healing.This work presents an intriguing activity-enhancement effect in catalysts and exhibits impressive therapeutic efficacy in combating bacterial infections.展开更多
Understanding the influence of HCl on the NH_(3)-selective catalytic reduction reaction mechanism is crucial for designing highly efficient denitrification catalysts.The formation of chlorate species on the surface of...Understanding the influence of HCl on the NH_(3)-selective catalytic reduction reaction mechanism is crucial for designing highly efficient denitrification catalysts.The formation of chlorate species on the surface of the synthesized SbCeO_(x)catalyst,induced by HCl,significantly enhances low-temperature activity,as evidenced by a 30%increase in NO conversion at 155℃.Furthermore,it improves N_(2)selectivity at high temperatures,with a notable 17%increase observed at 405℃.Both experimental results and density functional theory calculations confirm that chlorate species form at Ce sites.This formation facilitates the creation of oxygen vacancies,boosting the oxygen exchange capacity.It also increases NH_(3)adsorption at the Ce sites,promotes the formation of Sb-OH,and reduces competitive OH adsorption on these sites.Notably,compared with the reaction mechanism without HCl,the presence of chlorate species enhances NH_(3)adsorption and activation,which is vital for subsequent catalytic reactions.展开更多
Carbon nanotubes(CNTs)supported CoB and CoBSn catalysts were synthesized for hydrogen production via NaBH4 hydrolysis.The roles of Sn-promoter and the effect of CNTs treatment on CoB catalysts were evaluated and discu...Carbon nanotubes(CNTs)supported CoB and CoBSn catalysts were synthesized for hydrogen production via NaBH4 hydrolysis.The roles of Sn-promoter and the effect of CNTs treatment on CoB catalysts were evaluated and discussed.It is found that after the addition of Sn promoter,the specific surface area and the generation of active CoB phase are increased,while the oxidation treatment of CNTs results in more loading amounts of active components and enrichment of electron at active sites as well as large surface area.Consequently,the Sn-doped CoB catalysts supported on CNTs with oxidation treatment exhibits a significantly improved activity with a high H_(2)generation rate of 2640 mL/(min·g).Meanwhile,this catalyst shows a low activation energy of 43.7 kJ/mol and relatively high reusability.展开更多
By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts d...By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts developed thus far still suffer from the issues of much lower activity and metal leaching,which severely hinder their practical application.Here,we demonstrate that incorporating phosphorus(P)atoms into graphitic carbon nitride(PCN)supports facilitates charge transfer from Rh to the PCN support,thus largely enhancing electronic metal-support interactions(EMSIs).In the styrene hydroformylation reaction,the activity of Rh_(1)/PCN single-atom catalysts(SACs)with varying P contents exhibited a volcano-shaped relationship with P doping,where the Rh_(1)/PCN SAC with optimal P doping showed exceptional activity,approximately 5.8-and 3.3-fold greater than that of the Rh_(1)/g-C_(3)N_(4)SAC without P doping and the industrial homogeneous catalyst HRh(CO)(PPh_(3))_(3),respectively.In addition,the optimal Rh_(1)/PCN SAC catalyst also demonstrated largely enhanced multicycle stability without any visible metal aggregation owing to the increased EMSIs,which sharply differed from the severe metal aggregation of large nanoparticles on the Rh_(1)/g-C_(3)N_(4)SAC.Mechan-istic studies revealed that the enhanced catalytic performance could be attributed to electron-deficient Rh species,which reduced CO adsorption while simultaneously promoting alkene adsorption through increased EMSIs.These findings suggest that tuning EMSIs is an effective way to achieve SACs with high activity and durability.展开更多
文摘Series of carbon nanotube supported Ru-based catalysts were prepared by impregnation method and applied successfully for complete removal of CO by CO selective methanation from H2-rich gas stream conducted in a fixed-bed quartz tubular reactor at ambient pressure. It was found that the metal promoter, reduction temperature and metal loading affected the catalytic properties significantly. The most excellent performance was presented by 30 wt% Ru-Zr/CNTs catalyst reduced at 350 ℃. Since it decreased CO concentration to below 10 ppm from 12000 ppm by CO selective methanation at the temperature range of 180-240 ℃, and kept CO selectivity higher than 85% at the temperature below 200 ℃. Characterization using XRD, TEM, H2-TPR and XPS suggests that Zr modification of Ru/CNTs results in the weakening of the interaction between Ru and CNTs, a higher Ru dispersion and the oxidization of surface Ru. Amorphous and high dispersed Ru particles with small size were obtained for 30 wt% Ru-Zr/CNTs catalyst reduced at 350 ℃, leading to excellent catalytic performance in CO selective methanation.
文摘The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.
基金supported by the National Natural Science Foundation of China(No.22378308)Jing-Jin-Ji Regional Integrated Environmental Improvement-National Science and Technology Major Project(No.2024ZD1200301–2)the Scientific and Technological Project of Yunnan Precious Metal Laboratory(No.YPML2023050202)。
文摘A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.
基金financially supported by the Key Research and Development Program of Hainan Province(No.ZDYF2022GXJS006)the National Natural Science Foundation of China(Nos.52231008,52201009 and 52001227)+2 种基金Hainan Provincial Natural Science Foundation of China(No.223RC401)the Education Department of Hainan Province(No.Hnky2023ZD-2)the Starting Research Funds of the Hainan University of China(Nos.KYQD(ZR)-21105 and XJ2300002951)。
文摘Oxygen evolution reaction(OER)is a kinetically harsh four-electron anode reaction that requires a large overpotential to provide current and is of great importance in renewable electrochemical technique.Ir/Rubased perovskite oxides hold great significance for application as OER electrocatalysts,due to that their multimetal-oxide forms can reduce the use of noble metals,and their compositional tunability can modulate the electronic structure and optimize OER performance.However,high operating potentials and corrosive environments pose a serious challenge to the development of durable Ir-based and Ru-based perovskite electrocatalysts.Tremendous efforts have been dedicated to improving the Ir/Ru-based perovskite activity to enhance the efficiency;however,progress in improving the durability of Ir/Ru-based perovskite electrocatalysts has been rather limited.In this review,the recent research progress of Ir/Ru-based perovskites is reviewed from the perspective of heteroatom doping,structural modulation,and formation of heterostructures.The dissolution mechanism studies of Ir/Ru and experimental attempts to improve the durability of Ir/Ru-based perovskite electrocatalysts are discussed.Challenges and outlooks for further developing Ru-and Irbased perovskite oxygen electrocatalysts are also presented.
基金the National Natural Science Foundation of China(No.22102215)the Fundamental Research Funds for the Central Universities(Nos.21CX06013A and 22CX03001A)the State Key Laboratory of Heavy Oil Processing and the Key Project of China National Key R&D Plan(No.2018YFE0118200).
文摘The fundamental insights of the reaction mechanism,especially the synergistic effect between oxygen vacancies and basic sites,are highly promising yet challenging for Ru-based catalysts during carbon dioxide(CO_(2))methanation.Herein,a series of Rubased catalysts were employed to study the mechanism of CO_(2) methanation.It is found that Ru/CeO_(2) catalyst exhibits a much higher CO_(2) conversion(86%)and CH4 selectivity(100%),as well as excellent stability of 30 h due to the existence of abundant oxygen vacancies and weak basic sites.Additionally,the in-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)calculations reveal that the formate formation step dominated the hydrogenation route on Ru/CeO_(2) catalyst,and the b-HCOO^(*)could be the key intermediate due to b-HCOO^(*)is more easily hydrogenated to methane than m-HCOO^(*).The systematic study marks the significance of precise tailoring of the synergistic relationship between oxygen vacancies and basic sites for achieving the desired performance in CO_(2) methanation.
基金Supported by the Natural Science Foundation of Zhejiang Province (No. 299015), the Development Plan of Youth Mainstay Teacher of the Education Ministry of China and the Special Foundation for Youth Talent by Zhejiang (RC9702).
文摘The effects of promoters K, Ba, Sm on the chemisorption and desorption of hydrogen and nitrogen, dispersion of metallic Ru. and catalytic activity of active carbon (AC) supported ruthenium catalyst for ammonia synthesis have been studied by means of pulse chromatography, temperature-programmed desorption, and activity test. Promoters K, Ba and Sm increased the activity of Ru/AC catalysts for ammonia synthesis significantly, and particularly, potassium exhibited the best promotion on the activity because of the strong electronic donation to metallic Ru. Much higher activity can be obtained for Ru/AC catalyst with binary or triple promoters. The activity of Ru/AC catalyst is dependent on the adsorption of hydrogen and nitrogen. The high activity of catalyst could be ascribed to strong dissociation of nitrogen on the catalyst surface. Strong adsorption of hydrogen would inhibit the adsorption of nitrogen, resulted in decrease of the catalytic activity. Ru/AC catalyst promoted by Sm2O3 shows the best dispersion of metallic Ru, since the partly reduced SmOx on the surface modifies the morphology of active sites and favors the dispersion of metallic Ru. The activity of Ru/AC catalysts is in accordance to the corresponding amount of nitrogen chemisorption and the desorption activation energy of nitrogen. The desorption activation energy for nitrogen decreases in the order of Ru>Ru-Ba>Ru-Sm>Ru-Ba-Sm>Ru-K>Ru-K-Sm>Ru-K-Ba>Ru-K-Ba-Sm, just opposite to the order of catalytic activity, suggesting that the ammonia synthesis over Ru-based catalyst is controlled by the step of dissociation of nitrogen.
基金partly supported by the National Natural Science Foundation of China(NSFCs,52202050,52122308,21905253,51973200)the China Postdoctoral Science Foundation(2022TQ0286)the Natural Science Foundation of Henan(202300410372)。
文摘Water electrolysis using proton-exchange membranes is one of the most promising technologies for carbon-neutral and sustainable energy production.Generally,the overall efficiency of water splitting is limited by the oxygen evolution reaction(OER).Nevertheless,a trade-off between activity and stability exists for most electrocatalytic materials in strong acids and oxidizing media,and the development of efficient and stable catalytic materials has been an important focus of research.In this view,gaining in-depth insights into the OER system,particularly the interactions between reaction intermediates and active sites,is significantly important.To this end,this review introduces the fundamentals of the OER over Ru-based materials,including the conventional adsorbate evolution mechanism,lattice oxygen oxidation mechanism,and oxide path mechanism.Moreover,the up-to-date progress of representative modifications for improving OER performance is further discussed with reference to specific mechanisms,such as tuning of geometric,electronic structures,incorporation of proton acceptors,and optimization of metal-oxygen covalency.Finally,some valuable insights into the challenges and opportunities for OER electrocatalysts are provided with the aim to promote the development of next-generation catalysts with high activity and excellent stability.
基金financially supported by the National Natural Science Foundation of China(Nos.51602018 and 51902018)the Natural Science Foundation of Beijing Municipality(No.2154052)+3 种基金the China Postdoctoral Science Foundation(No.2014M560044)the Fundamental Research Funds for the Central Universities(No.FRF-MP-20-22)USTB Research Center for International People-to-people Exchange in Science,Technology and Civilization(No.2022KFYB007)Education and Teaching Reform Foundation at University of Science and Technology Beijing(Nos.2023JGC027,KC2022QYW06,and KC2022TS09)。
文摘S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.
基金the Canadian NRCan OERD Energy Innovation Programthe Natural Sciences and Engineering Research Council of Canada,and the Carbon Solution Program for their financial support.
文摘The pursuit of alternative fuel generation technologies has gained momentum due to the diminishing reserves of fossil fuels and global warming from increased CO_(2)emission.Among the proposed methods,the hydrogenation of CO_(2)to produce marketable carbon-based products like methanol and ethanol is a practical approach that offers great potential to reduce CO_(2)emissions.Although significant volumes of methanol are currently produced from CO_(2),developing highly efficient and stable catalysts is crucial for further enhancing conversion and selectivity,thereby reducing process costs.An in-depth examination of the differences and similarities in the reaction pathways for methanol and ethanol production highlights the key factors that drive C-C coupling.Identifying these factors guides us toward developing more effective catalysts for ethanol synthesis.In this paper,we explore how different catalysts,through the production of various intermediates,can initiate the synthesis of methanol or ethanol.The catalytic mechanisms proposed by spectroscopic techniques and theoretical calculations,including operando X-ray methods,FTIR analysis,and DFT calculations,are summarized and presented.The following discussion explores the structural properties and composition of catalysts that influence C-C coupling and optimize the conversion rate of CO_(2)into ethanol.Lastly,the review examines recent catalysts employed for selective methanol and ethanol production,focusing on single-atom catalysts.
文摘The efficient hydrogenolysis of esters to alkanes is the key protocol for producing advanced biofuels from renewable plant oils or fats.Due to the low reactivity of the carbonyl group in esters,a high reaction temperature(>250℃)is the prerequisite to ensure high conversion of esters.Here,we report a highly dispersed MoO_(x)-Ru/C bimetallic catalyst for the efficient hydrogenolysis of esters to alkanes under 150°C.The optimal catalyst exhibits>99%conversion of methyl stearate and 99%selectivity to diesel-range alkanes,reaching a high rate of up to 2.0 mmol gcat^(–1)h^(–1),5 times higher than that of Ru/C catalyst(MoO_(x)/C is inert).Integrated experimental and theoretical investigations attribute the high performance to the abundant MoO_(x)-Ru interfacial sites on the catalyst surface,which offers high activity for the C–O cleavage of esters.Furthermore,the dispersed MoO_(x)species significantly weaken the hydrocracking activity of the metallic Ru for C–C bonds,thus yielding alkane products without carbon loss.This study provides a facile and novel strategy for the design of high-performance heterogeneous catalysts for the hydrodeoxygenation of biomass-derived esters to alkane products.
文摘To improve the catalytic performance of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3)(LSCF)towards carbon soot,we utilized the impregnation method to incorporate Ag into the prepared LSCF catalyst.We conducted a series of characterization tests and evaluated the soot catalytic activity of the composite catalyst by comparing it with the LaCoO_(3) group,LaFeO_(3) group,and catalyst-free group.The results indicate that the Ag-LSCF composite catalyst exhibits the highest soot catalytic activity,with the characteristic temperature values of 376.3,431.1,and 473.9℃at 10%,50%,and 90%carbon soot conversion,respectively.These values are 24.8,20.2,and 23.1℃lower than those of the LSCF group.This also shows that LSCF can improve the catalytic activity of soot after compounding with Ag,and reflects the necessity of using catalysts in soot combustion reaction.XPS characterization and BET test show that Ag-LSCF has more abundant surface-adsorbed oxygen species,larger specific surface area and pore volume than LSCF,which also proves that Ag-LSCF has higher soot catalytic activity.
基金supported by the National Natural Science Foundation of China(No.21571062)the Program for Professor of Special Appointment(Eastern Scholar)at the Shanghai Institutions of Higher Learning to JGL,and the Fundamental Research Funds for the Central Universities(No.222201717003)。
文摘Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-performance biomass-derived ORR catalysts with an asymmetric Fe-N_(3)P configuration was prepared by a simple pyrolysis-etching technique,where carboxymethyl cellulose(CMC)was used as the carbon source,urea and 1,10-phenanthroline iron complex(FePhen)as additives,and Na_(3)PO_(4)as the phosphorus dopant and a pore-forming agent.The CMC-derived FeNPC catalyst displayed a large specific area(BET:1235 m^(2)g^(-1))with atomically dispersed Fe-N_(3)P active sites,which exhibited superior ORR activity and stability in alkaline solution(E_(1/2)=0.90 V vs.RHE)and Zn-air batteries(P_(max)=149 mW cm^(-2))to commercial Pt/C catalyst(E_(1/2)=0.87 V,P_(max)=118 mW cm^(-2))under similar experimental conditions.This work provides a feasible and costeffective route toward highly efficient ORR catalysts and their application to Zn-air batteries for energy conversion.
基金supported by the National Natural Science Foundation of China(Nos.22276182 and 22188102)the Natural Science Foundation of Fujian Province,China(No.2023J06048)the Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2021303).
文摘NH_(3)-SCR(SCR:Selective catalytic reduction)is an effective technology for the de-NO_(x)process from both mobile and stationary pollution sources,and the most commonly used catalysts are the vanadia-based catalysts.An innovative V_(2)O_(5)-CeO_(2)/TaTiO_(x)catalyst for NO_(x)removal was prepared in this study.The influences of Ce and Ta in the V_(2)O_(5)-CeO_(2)/TaTiO_(x)catalyst on the SCR performance and physicochemical properties were investigated.The V_(2)O_(5)-CeO_(2)/TaTiO_(x)catalyst not only exhibited excellent SCR activity in a wide temperature window,but also presented strong resistance to H_(2)Oand SO_(2)at 275◦C.A series of characterizationmethods was used to study the catalysts,including H2-temperature programmed reduction,X-ray photoelectron spectroscopy,NH_(3)-temperature programmed desorption,etc.It was discovered that a synergistic effect existed between Ce and Ta species.The introduction of Ce and Ta enlarged the specific surface area,increased the amount of acid sites and the ratio of Ce^(3+),(V^(3+)+V^(4+))and Oα,and strengthened the redox capability which were related to synergistic effect between Ce and Ta species,significantly improving the NH_(3)-SCR activity.
基金Research Institute for Smart Energy(CDB2)the grant from the Research Institute for Advanced Manufacturing(CD8Z)+4 种基金the grant from the Carbon Neutrality Funding Scheme(WZ2R)at The Hong Kong Polytechnic Universitysupport from the Hong Kong Polytechnic University(CD9B,CDBZ and WZ4Q)the National Natural Science Foundation of China(22205187)Shenzhen Municipal Science and Technology Innovation Commission(JCYJ20230807140402006)Start-up Foundation for Introducing Talent of NUIST and Natural Science Foundation of Jiangsu Province of China(BK20230426).
文摘Catalyst–support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction(OER).Here we modulate the catalyst–support interaction in polyaniline-supported Ni_(3)Fe oxide(Ni_(3)Fe oxide/PANI)with a robust hetero-interface,which significantly improves oxygen evolution activities with an overpotential of 270 mV at 10 mA cm^(-2)and specific activity of 2.08 mA cm_(ECSA)^(-2)at overpotential of 300 mV,3.84-fold that of Ni_(3)Fe oxide.It is revealed that the catalyst–support interaction between Ni_(3)Fe oxide and PANI support enhances the Ni–O covalency via the interfacial Ni–N bond,thus promoting the charge and mass transfer on Ni_(3)Fe oxide.Considering the excellent activity and stability,rechargeable Zn-air batteries with optimum Ni_(3)Fe oxide/PANI are assembled,delivering a low charge voltage of 1.95 V to cycle for 400 h at 10 mA cm^(-2).The regulation of the effect of catalyst–support interaction on catalytic activity provides new possibilities for the future design of highly efficient OER catalysts.
基金financially supported by the National Natural Science Foundation of China(22309137,22279095)Open subject project State Key Laboratory of New Textile Materials and Advanced Processing Technologies(FZ2023001).
文摘Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts.By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in AEMWEs.Herein,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work.Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER performance.More critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.
基金supported by Fundamental Research Program of Shanxi Province(202203021221303)。
文摘Transformation of urea and glycerol to glycerol carbonate is an environmental friendly and economical process.Catalysts play an indispensable role in the process.Although many catalysts have been developed,the performance of the catalysts still cannot meet the needs of industrialization.In this paper,research progress of the homogeneous and heterogeneous catalysts of the reaction over the past 20 years were reviewed systematically.According to the types and active centers of catalysts,the catalysts were classified systematically and analyzed in detail.The typical reaction mechanisms were also summarized.The research and development direction of catalysts is made more explicit through systematic classification and mechanism analysis.The article reveals more novel catalysts have been designed and used for the reaction,such as mixed metal oxides with special structures,solid wastes and non-metallic materials.This work summarized the current state of research and prospected possible routes for design of novel catalysts.It is hoped that this review can provide some references for developing efficient catalysts.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB3804500)the National Natural Science Foundation of China(Grant No.52202352,22335006)+4 种基金the Shanghai Municipal Health Commission(Grant No.20224Y0010)the CAMS Innovation Fund for Medical Sciences(Grant No.2021-I2M-5-012)the Basic Research Program of Shanghai Municipal Government(Grant No.21JC1406000)the Fundamental Research Funds for the Central Universities(Grant No.22120230237,2023-3-YB-11,22120220618)the Basic Research Program of Shanghai Municipal Government(23DX1900200).
文摘The current single-atom catalysts(SACs)for medicine still suffer from the limited active site density.Here,we develop a synthetic method capable of increasing both the metal loading and mass-specific activity of SACs by exchanging zinc with iron.The constructed iron SACs(h^(3)-FNC)with a high metal loading of 6.27 wt%and an optimized adjacent Fe distance of~4 A exhibit excellent oxidase-like catalytic performance without significant activity decay after being stored for six months and promising antibacterial effects.Attractively,a“density effect”has been found at a high-enough metal doping amount,at which individual active sites become close enough to interact with each other and alter the electronic structure,resulting in significantly boosted intrinsic activity of single-atomic iron sites in h^(3)-FNCs by 2.3 times compared to low-and medium-loading SACs.Consequently,the overall catalytic activity of h^(3)-FNC is highly improved,with mass activity and metal mass-specific activity that are,respectively,66 and 315 times higher than those of commercial Pt/C.In addition,h^(3)-FNCs demonstrate efficiently enhanced capability in catalyzing oxygen reduction into superoxide anion(O_(2)·^(−))and glutathione(GSH)depletion.Both in vitro and in vivo assays demonstrate the superior antibacterial efficacy of h^(3)-FNCs in promoting wound healing.This work presents an intriguing activity-enhancement effect in catalysts and exhibits impressive therapeutic efficacy in combating bacterial infections.
文摘Understanding the influence of HCl on the NH_(3)-selective catalytic reduction reaction mechanism is crucial for designing highly efficient denitrification catalysts.The formation of chlorate species on the surface of the synthesized SbCeO_(x)catalyst,induced by HCl,significantly enhances low-temperature activity,as evidenced by a 30%increase in NO conversion at 155℃.Furthermore,it improves N_(2)selectivity at high temperatures,with a notable 17%increase observed at 405℃.Both experimental results and density functional theory calculations confirm that chlorate species form at Ce sites.This formation facilitates the creation of oxygen vacancies,boosting the oxygen exchange capacity.It also increases NH_(3)adsorption at the Ce sites,promotes the formation of Sb-OH,and reduces competitive OH adsorption on these sites.Notably,compared with the reaction mechanism without HCl,the presence of chlorate species enhances NH_(3)adsorption and activation,which is vital for subsequent catalytic reactions.
基金supported by National Natural Science Foundation of China(22276144).
文摘Carbon nanotubes(CNTs)supported CoB and CoBSn catalysts were synthesized for hydrogen production via NaBH4 hydrolysis.The roles of Sn-promoter and the effect of CNTs treatment on CoB catalysts were evaluated and discussed.It is found that after the addition of Sn promoter,the specific surface area and the generation of active CoB phase are increased,while the oxidation treatment of CNTs results in more loading amounts of active components and enrichment of electron at active sites as well as large surface area.Consequently,the Sn-doped CoB catalysts supported on CNTs with oxidation treatment exhibits a significantly improved activity with a high H_(2)generation rate of 2640 mL/(min·g).Meanwhile,this catalyst shows a low activation energy of 43.7 kJ/mol and relatively high reusability.
基金supported by the Petrochemical Research Institute Foundation(21-CB-09-01)the National Natural Science Foundation of China(22302186,22025205)+1 种基金the China Postdoctoral Science Foundation(2022M713030,2023T160618)the Fundamental Research Funds for the Central Universities(WK2060000058,WK2060000038).
文摘By simplifying catalyst-product separation and reducing phosphorus waste,heterogeneous hydroformylation offers a more sustainable alternative to homogeneous processes.However,heterogeneous hydroformylation catalysts developed thus far still suffer from the issues of much lower activity and metal leaching,which severely hinder their practical application.Here,we demonstrate that incorporating phosphorus(P)atoms into graphitic carbon nitride(PCN)supports facilitates charge transfer from Rh to the PCN support,thus largely enhancing electronic metal-support interactions(EMSIs).In the styrene hydroformylation reaction,the activity of Rh_(1)/PCN single-atom catalysts(SACs)with varying P contents exhibited a volcano-shaped relationship with P doping,where the Rh_(1)/PCN SAC with optimal P doping showed exceptional activity,approximately 5.8-and 3.3-fold greater than that of the Rh_(1)/g-C_(3)N_(4)SAC without P doping and the industrial homogeneous catalyst HRh(CO)(PPh_(3))_(3),respectively.In addition,the optimal Rh_(1)/PCN SAC catalyst also demonstrated largely enhanced multicycle stability without any visible metal aggregation owing to the increased EMSIs,which sharply differed from the severe metal aggregation of large nanoparticles on the Rh_(1)/g-C_(3)N_(4)SAC.Mechan-istic studies revealed that the enhanced catalytic performance could be attributed to electron-deficient Rh species,which reduced CO adsorption while simultaneously promoting alkene adsorption through increased EMSIs.These findings suggest that tuning EMSIs is an effective way to achieve SACs with high activity and durability.
