Filled inclusions in rock discontinuities play a key role in the mechanical characteristics of the rock and thereby influence the stability of rock engineering. In this study, a series of impact tests were performed u...Filled inclusions in rock discontinuities play a key role in the mechanical characteristics of the rock and thereby influence the stability of rock engineering. In this study, a series of impact tests were performed using a split Hopkinson pressure bar system with high-speed photography to investigate the effect of interlayer strength on the wave propagation and fracturing process in composite rock-mortar specimens.The results indicate that the transmission coefficient, nominal dynamic strength, interlayer closure, and specific normal stiffness generally increase linearly with increasing interlayer stiffness. The cement mortar layer can serve as a buffer during the deformation of composite specimens. The digital images show that tensile cracks are typically initiated at the rock-mortar interface, propagate along the loading direction, and eventually result in a tensile failure regardless of the interlayer properties. However, when a relatively weaker layer is sandwiched between the rock matrix, an increasing amount of cement mortar is violently ejected and slight slabbing occurs near the rock-mortar interface.展开更多
The tensile strength at the rock-concrete interface is one of the crucial factors controlling the failure mechanisms of structures,such as concrete gravity dams.Despite the critical importance of the failure mechanism...The tensile strength at the rock-concrete interface is one of the crucial factors controlling the failure mechanisms of structures,such as concrete gravity dams.Despite the critical importance of the failure mechanism and tensile strength of rock-concrete interfaces,understanding of these factors remains very limited.This study investigated the tensile strength and fracturing processes at rock-mortar interfaces subjected to direct and indirect tensile loadings.Digital image correlation(DIC)and acoustic emission(AE)techniques were used to monitor the failure mechanisms of specimens subjected to direct tension and indirect loading(Brazilian tests).The results indicated that the direct tensile strength of the rock-mortar specimens was lower than their indirect tensile strength,with a direct/indirect tensile strength ratio of 65%.DIC strain field data and moment tensor inversions(MTI)of AE events indicated that a significant number of shear microcracks occurred in the specimens subjected to the Brazilian test.The presence of these shear microcracks,which require more energy to break,resulted in a higher tensile strength during the Brazilian tests.In contrast,microcracks were predominantly tensile in specimens subjected to direct tension,leading to a lower tensile strength.Spatiotemporal monitoring of the cracking processes in the rock-mortar interfaces revealed that they show AE precursors before failure under the Brazilian test,whereas they show a minimal number of AE events before failure under direct tension.Due to different microcracking mechanisms,specimens tested under Brazilian tests showed lower roughness with flatter fracture surfaces than those tested under direct tension with jagged and rough fracture surfaces.The results of this study shed light on better understanding the micromechanics of damage in the rock-concrete interfaces for a safer design of engineering structures.展开更多
基金supported by the National Natural Science Foundation of China (No. 52074349)Postgraduate Research & Practice Innovation Program of Jiangsu Province (No. KYCX21_0119)Hunan Provincial Natural Science Foundation (No. 2019JJ20028)。
文摘Filled inclusions in rock discontinuities play a key role in the mechanical characteristics of the rock and thereby influence the stability of rock engineering. In this study, a series of impact tests were performed using a split Hopkinson pressure bar system with high-speed photography to investigate the effect of interlayer strength on the wave propagation and fracturing process in composite rock-mortar specimens.The results indicate that the transmission coefficient, nominal dynamic strength, interlayer closure, and specific normal stiffness generally increase linearly with increasing interlayer stiffness. The cement mortar layer can serve as a buffer during the deformation of composite specimens. The digital images show that tensile cracks are typically initiated at the rock-mortar interface, propagate along the loading direction, and eventually result in a tensile failure regardless of the interlayer properties. However, when a relatively weaker layer is sandwiched between the rock matrix, an increasing amount of cement mortar is violently ejected and slight slabbing occurs near the rock-mortar interface.
文摘The tensile strength at the rock-concrete interface is one of the crucial factors controlling the failure mechanisms of structures,such as concrete gravity dams.Despite the critical importance of the failure mechanism and tensile strength of rock-concrete interfaces,understanding of these factors remains very limited.This study investigated the tensile strength and fracturing processes at rock-mortar interfaces subjected to direct and indirect tensile loadings.Digital image correlation(DIC)and acoustic emission(AE)techniques were used to monitor the failure mechanisms of specimens subjected to direct tension and indirect loading(Brazilian tests).The results indicated that the direct tensile strength of the rock-mortar specimens was lower than their indirect tensile strength,with a direct/indirect tensile strength ratio of 65%.DIC strain field data and moment tensor inversions(MTI)of AE events indicated that a significant number of shear microcracks occurred in the specimens subjected to the Brazilian test.The presence of these shear microcracks,which require more energy to break,resulted in a higher tensile strength during the Brazilian tests.In contrast,microcracks were predominantly tensile in specimens subjected to direct tension,leading to a lower tensile strength.Spatiotemporal monitoring of the cracking processes in the rock-mortar interfaces revealed that they show AE precursors before failure under the Brazilian test,whereas they show a minimal number of AE events before failure under direct tension.Due to different microcracking mechanisms,specimens tested under Brazilian tests showed lower roughness with flatter fracture surfaces than those tested under direct tension with jagged and rough fracture surfaces.The results of this study shed light on better understanding the micromechanics of damage in the rock-concrete interfaces for a safer design of engineering structures.
