Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization.During the polymerization process,the molecular weight distri...Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ^1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.展开更多
To make more homogenous organic monolithic structure, reversible addition-fragmentation chain transfer （RAFT） process was employed in the synthesis of the clenbuterol imprinted polymer. In the synthesis, the influen...To make more homogenous organic monolithic structure, reversible addition-fragmentation chain transfer （RAFT） process was employed in the synthesis of the clenbuterol imprinted polymer. In the synthesis, the influence of synthetic conditions on the polymer structure and separation efficiency was studied. The result demonstrated that the imprinted columns prepared with RAFT process have higher column efficiency and selectivity than the columns prepared with conventional polymerization in the present study, which may result from the higher surface area, smaller pore size and the narrower globule size distribution in their structures. The result indicated that RAFT polymerization provided better conditions for the clenbuterol imprinted monolithic polymer preparation. 2009 Xiang Chao Dong. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial sourc...Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis.The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.展开更多
Reversible chain transfer catalyzed polymerization(RTCP)is a practical and efficient process for the precise synthesis of polymers with special architecture by using simple phenols(2,4,6-trimethylphenol,TMP)or hydroca...Reversible chain transfer catalyzed polymerization(RTCP)is a practical and efficient process for the precise synthesis of polymers with special architecture by using simple phenols(2,4,6-trimethylphenol,TMP)or hydrocarbons(xanthene,XT)as efficient organocatalysts.Herein,alkyl iodide(R-1),which was gen erated from in situ bromine-iodine transformation of alkyl bromide(R-Br)with sodium iodide(Nal),was served as initiator to mediate RTCP with TMP or XT.MMA and other functional methacrylates,including GMA,DEAM,DMAEMA and BzMA,were successfully initiated by combining orga no catalysts and azo in itiators to yield polymers with low-polydispersity(M_(w)/M_(n)=1.1-1.5)and ideal mono mer conversions(50%-90%)at moderate temperature.More over,3-armstar polymers were also obtained by this method.The high chain-end fidelity of the obtained poly(methyl methacrylate)with iodine as chain-end group(PMMA-I)was confirmed by chain-extension reaction.The en vironme ntally frie ndly initiators and orga no catalysts exhibit powerful polymerization properties toward RTCP,providing a sign ificant method to synthesize functional polymers.展开更多
Dispersity(D)of polymers has a great effect on the properties of polymeric materials,and therefore how to control θ is very important but still a huge challenge in polymer synthesis,especially for reversible-deactiva...Dispersity(D)of polymers has a great effect on the properties of polymeric materials,and therefore how to control θ is very important but still a huge challenge in polymer synthesis,especially for reversible-deactivation radical polymerization(RDRP)strategy.Herein,we successfully developed a novel strategy to adjust D of polymers by visible light-controlled reversible complexation mediated living radical polymerizatio n(RCMP)and combi nation of single-electron transfer-degenerative chain tran sfer living radical polymerization(SET-DTLRP)at room temperature.In RCMP system,2-iodo-2-methylpropionitrile(CP-I)and ethyl 2-iodo-2-phenylacetate(EIPA)were used as alkyl iodide initiators,by using methyl methacrylate(MMA)as the model monomer and n-butylacrylate(BA)as the end-capping reagent to regulate D of polymers.Subsequently,we successfully prepared the block copolymer PMMA-b-PBA with adjustable D by reactivating the polymer end-chains via SET-DTLRP in the presence of copper wire,fully dem on strati ng that it is a promising strategy that can keep the"living"feature of polymers while regulating their molar mass dispersities easily.展开更多
Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmos...Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmospheres(e.g.argon,nitrogen)are usually required.Moreover,the large-scale preparation of block copolymer nano-objects at room temperature is challenging.Herein,we report an enzyme-assisted photoinitiated polymerization-induced self-assembly(photo-PISA)in continuous flow reactors with oxygen toleranee.The addition of glucose oxidase(GOx)and glucose into the reaction mixture can consume oxygen efficiently and constantly,allow the flow photo-PISA to be performed under open-air conditions.Polymerization kinetics indicated that only a small amount of GOx(0.5 μmol/L)was needed to achieve the oxygen tolerance.Block copolymer nano-objects with different morphologies can be prepared by varying reaction conditions including the degree of polymerization(DP)of core-forming block,monomer concentration,reaction temperature,and solvent composition.We expect this study will provide a facile platform for the large-scale production of block copolymer nano-objects with different morphologies at room temperature.展开更多
The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacr...The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacrylate-co-6-Ovinyladipoyl-D-glucopyranose)( P( DEGMA-co-VAG)) with narrow polydispersity( PDI) and thermosensitivity was prepared by reversible addition-fragmentation chain transfer( RAFT)polymerization. P( DEGMA-co-VAG) was characterized by1 H NMR,FTIR and gel permeation chromatography( GPC). The characterization of UV-visible spectroscopy showed that the micelles from glycopolymer P( DEGMA-co-VAG) were thermo-responsive and the low critical solution temperature( LCST) could be controlled by the molar ratio of monomers. When the molar ratio of DEGMA and VAG was 2∶ 1,the LCST of P( DEGMA-co-VAG) was36 ℃ in aqueous solution,which could form nano micelles in the human body environment. It was found that P( DEGMA-co-VAG)was non-toxic at 0. 1-1 mg / m L concentrations when incubated with pig iliac endothelial cells( PIECs) for 24 h. Thus,the synthesized glycopolymers has great potential as drug delivery carriers.展开更多
Bulk polymerizations of styrene (St) were carried out in the presence of three reversible addition fragmentation chain transfer (RAFT) agents benzyl dithiobenzoate (BDB), cumyl dithiobenzoate(CDB), and 1-phenylethyl d...Bulk polymerizations of styrene (St) were carried out in the presence of three reversible addition fragmentation chain transfer (RAFT) agents benzyl dithiobenzoate (BDB), cumyl dithiobenzoate(CDB), and 1-phenylethyl dithiobenzoate (PEDB) under low ratio of RAFT agent to initiator. The kinetic model was developed to predict polymerization rate, which indicates that the RAFT polymerization of St is a first-order reaction. In the range of experimental conversions, the plots of -ln(1-x) against time t are approximately linear (x is monomer conversion). The kinetic study reveals the existence of strong rate retardation in RAFT polymerization of styrene. A coefficient K_r is defined to estimate the rate retardation in the RAFT system considering the assumption that the retardation in polymerization rate is mainly attributed to slow fragmentation of the intermediate radicals. K_r relates to the structure of RAFT agents as well as the concentrations of RAFT agent and azobis isobutyronitrile (AIBN). For a certain RAFT agent, the value of K_r is enhanced by the increase in the initial concentration of RAFT agent and the higher ratio of RAFT to AIBN. With the same recipe for different RAFT agents, the increasing trend for the values of K_r is BDB<PEDB<CDB.展开更多
Cyclic polymers have attracted more and more attentions in recent years because of their unique topological structures and characteristic properties in both solution and bulk state. There are relatively few reports on...Cyclic polymers have attracted more and more attentions in recent years because of their unique topological structures and characteristic properties in both solution and bulk state. There are relatively few reports on cyclic polymers, partly because of the more demanding synthetic procedures. In recent years, 'click' reaction, especially Cu(I)-catalyzed azide-alkyne cycloaddition(CuAAC), has been widely utilized in the synthesis of cyclic polymer materials because of its high efficiency and low susceptibility to side reactions. In this review, we will focus on three aspects:(1) Constructions of monocyclic polymer using CuAAC 'click' chemistry;(2) Formation of complex cyclic polymer topologies through CuAAC reactions;(3) Using CuAAC 'click' reaction in the precise synthesis of molecularly defined macrocycles. We believe that the CuAAC click reaction is playing an important role in the design and synthesis of functional cyclic polymers.展开更多
Poly(N,N-dimethyl acrylamide)-block-poly(styrene)-block-poly(N,N-dimethyl acrylamide)(PDMAc-bPSt-b-PDMAc)amphiphilic triblock copolymer micro/nano-objects were synthesized through reversible addition-fragmentation cha...Poly(N,N-dimethyl acrylamide)-block-poly(styrene)-block-poly(N,N-dimethyl acrylamide)(PDMAc-bPSt-b-PDMAc)amphiphilic triblock copolymer micro/nano-objects were synthesized through reversible addition-fragmentation chain transfer(RAFT)dispersion polymerization of St mediated with poly(N,Ndimethyl acrylamide)trithiocarbonate(PDMAc-TTC-PDMAc)bi-functional macromolecular RAFT agent.It is found that the morphology of the PDMAc-b-PSt-b-PDMAc copolymer micro/nano-objects like spheres,vesicles and vesicle with hexagonally packed hollow hoops(HHHs)wall can be tuned by changing the solvent composition.In addition,vesicles with two sizes(600 nm,264 nm)and vesicles with HHHs features were also synthesized in high solid content systems(30 wt%and 40 wt%,respectively).Besides,as compared with typical AB diblock copolymers(A is the solvophilic,stabilizer block,and B is the solvophobic block),ABA triblock copolymers tend to form higher order morphologies,such as vesicles,under similar conditions.The finding of this study provides a new and robust approach to prepare block copolymer vesicles and other higher order micelles with special structure via PISA.展开更多
Aggregation-induced emission(AIE)is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known aggregation-caused quenching(ACQ).AIE has the potential to b...Aggregation-induced emission(AIE)is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known aggregation-caused quenching(ACQ).AIE has the potential to be utilized in the large-scale production of AIE-active polymeric materials because of their wide range of practical applications such as stimuli-responsive sensors,biological imaging agents,and drug delivery systems.This is evident from the increasing number of publications over the years since AIE was first discovered.In addition,the evergrowing interest in this field has led many researchers around the world to develop new and creative methods in the design of monomers,initiators and crosslinkers,with the goal of broadening the scope and utility of AIE polymers.One of the most promising approaches to the design and synthesis of AIE polymers is the use of the reversible-deactivation radical polymerization(RDRP)techniques,which enabled the production of well-controlled AIE materials that are often difficult to achieve by other methods.In this review,a summary of some recent works that utilize RDRP for AIE polymer design and synthesis is presented,including(i)the design of AIE-related monomers,initiators/crosslinkers;the achievements in preparation of AIE polymers using(ii)reversible addition–fragmentation chain transfer(RAFT)technique;(iii)atom transfer radical polymerization(ATRP)technique;(iv)other techniques such as Cu(0)-RDRP technique and nitroxide-mediated polymerization(NMP)technique;(v)the possible applications of these AIE polymers,and finally(vi)a summary/perspective and the future direction of AIE polymers.展开更多
Reverse addition\|fragmentation chain transfer (RAFT) polymerizatin of MAn with St is reported aiming at the synthesis of a well\|defined alternating copolymer of MAn with St.The results show that the polymers possess...Reverse addition\|fragmentation chain transfer (RAFT) polymerizatin of MAn with St is reported aiming at the synthesis of a well\|defined alternating copolymer of MAn with St.The results show that the polymers possess predetermined molecular weight and molecular weight distribution as narrow as 1 2. A novel well\|defined block copolymer P(MAn\| alt \|St)\| b \|PSt has also been prepared by the copolymerization of MAn with excess amount of St in molar feed via RAFT process.展开更多
基金supported by Major Program of National Natural Science Foundation of China(No. 20836007)National Natural Science Foundation of China(No.20806067).
文摘Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ^1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.
基金supported by the National Natural Science Foundation of China(No.20575030)
文摘To make more homogenous organic monolithic structure, reversible addition-fragmentation chain transfer （RAFT） process was employed in the synthesis of the clenbuterol imprinted polymer. In the synthesis, the influence of synthetic conditions on the polymer structure and separation efficiency was studied. The result demonstrated that the imprinted columns prepared with RAFT process have higher column efficiency and selectivity than the columns prepared with conventional polymerization in the present study, which may result from the higher surface area, smaller pore size and the narrower globule size distribution in their structures. The result indicated that RAFT polymerization provided better conditions for the clenbuterol imprinted monolithic polymer preparation. 2009 Xiang Chao Dong. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金Supported by the National Natural Science Foundation of China(Nos.11475246 and 11175234)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02030205)
文摘Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis.The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.
基金We gratefully acknowledge the financial support from Natural Science Foundation of Fujian Province(No.2019J05040)Key Program of Qingyuan Innovation Laboratory(No.00221003)‘111'program and Talent program of Fuzhou University(No.GXRC-18041).
文摘Reversible chain transfer catalyzed polymerization(RTCP)is a practical and efficient process for the precise synthesis of polymers with special architecture by using simple phenols(2,4,6-trimethylphenol,TMP)or hydrocarbons(xanthene,XT)as efficient organocatalysts.Herein,alkyl iodide(R-1),which was gen erated from in situ bromine-iodine transformation of alkyl bromide(R-Br)with sodium iodide(Nal),was served as initiator to mediate RTCP with TMP or XT.MMA and other functional methacrylates,including GMA,DEAM,DMAEMA and BzMA,were successfully initiated by combining orga no catalysts and azo in itiators to yield polymers with low-polydispersity(M_(w)/M_(n)=1.1-1.5)and ideal mono mer conversions(50%-90%)at moderate temperature.More over,3-armstar polymers were also obtained by this method.The high chain-end fidelity of the obtained poly(methyl methacrylate)with iodine as chain-end group(PMMA-I)was confirmed by chain-extension reaction.The en vironme ntally frie ndly initiators and orga no catalysts exhibit powerful polymerization properties toward RTCP,providing a sign ificant method to synthesize functional polymers.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.22071168 and 21774082)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Dispersity(D)of polymers has a great effect on the properties of polymeric materials,and therefore how to control θ is very important but still a huge challenge in polymer synthesis,especially for reversible-deactivation radical polymerization(RDRP)strategy.Herein,we successfully developed a novel strategy to adjust D of polymers by visible light-controlled reversible complexation mediated living radical polymerizatio n(RCMP)and combi nation of single-electron transfer-degenerative chain tran sfer living radical polymerization(SET-DTLRP)at room temperature.In RCMP system,2-iodo-2-methylpropionitrile(CP-I)and ethyl 2-iodo-2-phenylacetate(EIPA)were used as alkyl iodide initiators,by using methyl methacrylate(MMA)as the model monomer and n-butylacrylate(BA)as the end-capping reagent to regulate D of polymers.Subsequently,we successfully prepared the block copolymer PMMA-b-PBA with adjustable D by reactivating the polymer end-chains via SET-DTLRP in the presence of copper wire,fully dem on strati ng that it is a promising strategy that can keep the"living"feature of polymers while regulating their molar mass dispersities easily.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.21971047 and 21504017)Innovation Project of Education Department in Guangdong(No.2018KTSCX053)+1 种基金Y.C.acknowledges the support from Guangdong Special Support Program(No.2017TX04N371)J.T.acknowledges the support from Pearl River Young Scholar of Guangdong.
文摘Polymerization-induced self-assembly(PISA)is an emerging method for the preparation of block copolymer nano-objects at high concentrations.However,most PISA formulations have oxygen inhibition problems and inert atmospheres(e.g.argon,nitrogen)are usually required.Moreover,the large-scale preparation of block copolymer nano-objects at room temperature is challenging.Herein,we report an enzyme-assisted photoinitiated polymerization-induced self-assembly(photo-PISA)in continuous flow reactors with oxygen toleranee.The addition of glucose oxidase(GOx)and glucose into the reaction mixture can consume oxygen efficiently and constantly,allow the flow photo-PISA to be performed under open-air conditions.Polymerization kinetics indicated that only a small amount of GOx(0.5 μmol/L)was needed to achieve the oxygen tolerance.Block copolymer nano-objects with different morphologies can be prepared by varying reaction conditions including the degree of polymerization(DP)of core-forming block,monomer concentration,reaction temperature,and solvent composition.We expect this study will provide a facile platform for the large-scale production of block copolymer nano-objects with different morphologies at room temperature.
基金National Natural Science Foundation of China(No.21303014)
文摘The monomer 6-O-vinyladipoyl-D-glucopyranose( VAG)was synthesized by lipase catalyzed trans-esterification of divinyladipate with D-glucopyranose. A novel double hydrophilic glycopolymer poly( diethyleneglycol methacrylate-co-6-Ovinyladipoyl-D-glucopyranose)( P( DEGMA-co-VAG)) with narrow polydispersity( PDI) and thermosensitivity was prepared by reversible addition-fragmentation chain transfer( RAFT)polymerization. P( DEGMA-co-VAG) was characterized by1 H NMR,FTIR and gel permeation chromatography( GPC). The characterization of UV-visible spectroscopy showed that the micelles from glycopolymer P( DEGMA-co-VAG) were thermo-responsive and the low critical solution temperature( LCST) could be controlled by the molar ratio of monomers. When the molar ratio of DEGMA and VAG was 2∶ 1,the LCST of P( DEGMA-co-VAG) was36 ℃ in aqueous solution,which could form nano micelles in the human body environment. It was found that P( DEGMA-co-VAG)was non-toxic at 0. 1-1 mg / m L concentrations when incubated with pig iliac endothelial cells( PIECs) for 24 h. Thus,the synthesized glycopolymers has great potential as drug delivery carriers.
文摘Bulk polymerizations of styrene (St) were carried out in the presence of three reversible addition fragmentation chain transfer (RAFT) agents benzyl dithiobenzoate (BDB), cumyl dithiobenzoate(CDB), and 1-phenylethyl dithiobenzoate (PEDB) under low ratio of RAFT agent to initiator. The kinetic model was developed to predict polymerization rate, which indicates that the RAFT polymerization of St is a first-order reaction. In the range of experimental conversions, the plots of -ln(1-x) against time t are approximately linear (x is monomer conversion). The kinetic study reveals the existence of strong rate retardation in RAFT polymerization of styrene. A coefficient K_r is defined to estimate the rate retardation in the RAFT system considering the assumption that the retardation in polymerization rate is mainly attributed to slow fragmentation of the intermediate radicals. K_r relates to the structure of RAFT agents as well as the concentrations of RAFT agent and azobis isobutyronitrile (AIBN). For a certain RAFT agent, the value of K_r is enhanced by the increase in the initial concentration of RAFT agent and the higher ratio of RAFT to AIBN. With the same recipe for different RAFT agents, the increasing trend for the values of K_r is BDB<PEDB<CDB.
基金financially supported by the National Natural Science Foundation of China(No.21234005)the State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials,the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Program of Innovative Research Team of Soochow University
文摘Cyclic polymers have attracted more and more attentions in recent years because of their unique topological structures and characteristic properties in both solution and bulk state. There are relatively few reports on cyclic polymers, partly because of the more demanding synthetic procedures. In recent years, 'click' reaction, especially Cu(I)-catalyzed azide-alkyne cycloaddition(CuAAC), has been widely utilized in the synthesis of cyclic polymer materials because of its high efficiency and low susceptibility to side reactions. In this review, we will focus on three aspects:(1) Constructions of monocyclic polymer using CuAAC 'click' chemistry;(2) Formation of complex cyclic polymer topologies through CuAAC reactions;(3) Using CuAAC 'click' reaction in the precise synthesis of molecularly defined macrocycles. We believe that the CuAAC click reaction is playing an important role in the design and synthesis of functional cyclic polymers.
文摘Poly(N,N-dimethyl acrylamide)-block-poly(styrene)-block-poly(N,N-dimethyl acrylamide)(PDMAc-bPSt-b-PDMAc)amphiphilic triblock copolymer micro/nano-objects were synthesized through reversible addition-fragmentation chain transfer(RAFT)dispersion polymerization of St mediated with poly(N,Ndimethyl acrylamide)trithiocarbonate(PDMAc-TTC-PDMAc)bi-functional macromolecular RAFT agent.It is found that the morphology of the PDMAc-b-PSt-b-PDMAc copolymer micro/nano-objects like spheres,vesicles and vesicle with hexagonally packed hollow hoops(HHHs)wall can be tuned by changing the solvent composition.In addition,vesicles with two sizes(600 nm,264 nm)and vesicles with HHHs features were also synthesized in high solid content systems(30 wt%and 40 wt%,respectively).Besides,as compared with typical AB diblock copolymers(A is the solvophilic,stabilizer block,and B is the solvophobic block),ABA triblock copolymers tend to form higher order morphologies,such as vesicles,under similar conditions.The finding of this study provides a new and robust approach to prepare block copolymer vesicles and other higher order micelles with special structure via PISA.
基金Australian Research Council,Grant/Award Number:CE200100009。
文摘Aggregation-induced emission(AIE)is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known aggregation-caused quenching(ACQ).AIE has the potential to be utilized in the large-scale production of AIE-active polymeric materials because of their wide range of practical applications such as stimuli-responsive sensors,biological imaging agents,and drug delivery systems.This is evident from the increasing number of publications over the years since AIE was first discovered.In addition,the evergrowing interest in this field has led many researchers around the world to develop new and creative methods in the design of monomers,initiators and crosslinkers,with the goal of broadening the scope and utility of AIE polymers.One of the most promising approaches to the design and synthesis of AIE polymers is the use of the reversible-deactivation radical polymerization(RDRP)techniques,which enabled the production of well-controlled AIE materials that are often difficult to achieve by other methods.In this review,a summary of some recent works that utilize RDRP for AIE polymer design and synthesis is presented,including(i)the design of AIE-related monomers,initiators/crosslinkers;the achievements in preparation of AIE polymers using(ii)reversible addition–fragmentation chain transfer(RAFT)technique;(iii)atom transfer radical polymerization(ATRP)technique;(iv)other techniques such as Cu(0)-RDRP technique and nitroxide-mediated polymerization(NMP)technique;(v)the possible applications of these AIE polymers,and finally(vi)a summary/perspective and the future direction of AIE polymers.
文摘Reverse addition\|fragmentation chain transfer (RAFT) polymerizatin of MAn with St is reported aiming at the synthesis of a well\|defined alternating copolymer of MAn with St.The results show that the polymers possess predetermined molecular weight and molecular weight distribution as narrow as 1 2. A novel well\|defined block copolymer P(MAn\| alt \|St)\| b \|PSt has also been prepared by the copolymerization of MAn with excess amount of St in molar feed via RAFT process.
