Retrogressive landslides in sensitive clays pose significant risks to nearby infrastructure,as natural toe erosion or localized disturbances can trigger progressive block failures.While prior studies have largely reli...Retrogressive landslides in sensitive clays pose significant risks to nearby infrastructure,as natural toe erosion or localized disturbances can trigger progressive block failures.While prior studies have largely relied on two-dimensional(2D)large-deformation analyses,such models overlook key three-dimensional(3D)failure mechanisms and variability effects.This study develops a 3D probabilistic framework by integrating the Coupled Eulerian–Lagrangian(CEL)method with random field theory to simulate retrogressive landslides in spatially variable clay.Using Monte Carlo simulations,we compare 2D and 3D random large-deformation models to evaluate failure modes,runout distances,sliding velocities,and influence zones.The 3D analyses captured more complex failure modes—such as lateral retrogression and asynchronous block mobilization across slope width.Additionally,the 3D analyses predict longer mean runout distances(13.76 vs.11.92 m),wider mean influence distance(11.35 vs.8.73 m),and higher mean sliding velocities(4.66 vs.3.94 m/s)than their 2D counterparts.Moreover,3D models exhibit lower coefficients of variation(e.g.,0.10 for runout distance)due to spatial averaging across slope width.Probabilistic hazard assessment shows that 2D models significantly underpredict near-field failure probabilities(e.g.,48.8%vs.89.9%at 12 m from the slope toe).These findings highlight the limitations of 2D analyses and the importance of multi-directional spatial variability for robust geohazard assessments.The proposed 3D framework enables more realistic prediction of landslide mobility and supports the design of safer,risk-informed infrastructure.展开更多
The thawing of ice-rich permafrost leads to the formation of thermokarst landforms.Precise mapping of retrogressive thaw slumps(RTSs)is imperative for assessing the degradation and carbon exchange of permafrost at bot...The thawing of ice-rich permafrost leads to the formation of thermokarst landforms.Precise mapping of retrogressive thaw slumps(RTSs)is imperative for assessing the degradation and carbon exchange of permafrost at both local and regional scales on the Tibetan Plateau(TP).However,previous methods for RTSs mapping rely on a large number of samples and complex classifiers with low automation level or unnecessary complexity.We propose an automatic mapping network(AmRTSNet)for producing decimeter-level RTSs maps from GaoFen-7 images based on deep learning.Both the quantitative metrics and qualitative evaluations show that AmRTSNet trained in the Beiluhe offers significant advantages over previous methods.Without further fine-tuning,we conducted RTSs automatic mapping based on AmRTSNet in the Wulanwula,Chumarhe,and Gaolinggo.Over 141,312 ha on the TP have been automatically mapped,comprising 926 RTS regions with a total RTS area of 2318.72 ha.The average statistics of the mapped RTSs show low roundness(0.38),moderate rectangularity(0.61),and high convexity(0.79).About 90%of the RTSs are smaller than 6 ha.The average aspect ratio is 2.18.RTSs are unevenly distributed in belt-like aggregations with dominant density peaks.RTSs often concentrate in hillslopes and along lateral streams,with more dense areas more likely to have larger RTSs.展开更多
Influence of dual retrogression and re-aging（dual-RRA） temper on microstructure,strength and exfoliation corrosion（EC） behavior of Al-Zn-Mg-Cu alloy was investigated by hardness measurements,tensile properties tes...Influence of dual retrogression and re-aging（dual-RRA） temper on microstructure,strength and exfoliation corrosion（EC） behavior of Al-Zn-Mg-Cu alloy was investigated by hardness measurements,tensile properties tests,exfoliation corrosion tests,transmission electron microscopy（TEM） and scanning electron microscopy（SEM） observation combined energy dispersive X-ray detector（EDX） analysis.Dual-RRA temper maintains the matrix precipitates（MPs） similar to RRA temper,meanwhile obtains coarser and sparser grain boundary precipitates（GBPs） as well as higher Cu and lower Zn content compared with T76 temper.Therefore,dual-RRA temper not only keeps strength equivalent to the RRA temper but also obtains higher EC resistance than T76 temper.展开更多
The retrogression kinetics for grain boundary precipitate （GBP） of 7A55 aluminum alloy was investigated by transmission electron microscopy （TEM） observation. The results reveal that the coarsening behavior of GBP...The retrogression kinetics for grain boundary precipitate （GBP） of 7A55 aluminum alloy was investigated by transmission electron microscopy （TEM） observation. The results reveal that the coarsening behavior of GBP obeys “LSW” theory, namely, the cube of GBP average size has a linear dependence relation to retrogression time, and the coarsening rate accelerates at the elevated retrogression temperature. The GBP coarsening activation energy Qo of （115.2±1.3） kJ/mol is obtained subsequently. Taking the retrogression treatment schedule of 190℃, 45 min derived from AA7055 thin plate as reference, the non-isothermal retrogression model for GBP coarsening behavior is established based on “LSW”theory and “iso-kinetics” solution, which includes an Arrhenius form equation. After that, the average size of GBP r（t） is predicted successfully at any non-isothermal process T（t） when the initial size of GBP r0 is given. Finally, the universal characterization method for the microstructure homogeneity along the thickness direction of TA55 aluminum alloy thick plate is also set up.展开更多
Permo-Triassic high-pressure(HP) mafic granulites, together with the Bibong retrogressed eclogite,preserved along the central western Korean Peninsula provide important insights into the Late Permian to Triassic colli...Permo-Triassic high-pressure(HP) mafic granulites, together with the Bibong retrogressed eclogite,preserved along the central western Korean Peninsula provide important insights into the Late Permian to Triassic collisional orogeny in northeast Asia. The metamorphic pressureetemperatureetime(P-T-t)paths of these rocks, however, remain poorly constrained and even overestimated, owing to outdated geothermobarometers and inaccurate isopleth techniques. Here we evaluate the metamorphic Pe T conditions of Triassic HP mafic granulites including those in Baekdong, Sinri and Daepan and the Bibong Triassic retrogressed eclogite in the Hongseong area, and the Permo-Triassic Samgot mafic granulite in the Imjingang Belt of the central western Korean Peninsula through the application of modern phase equilibria techniques. The Baekdong and Samgot mafic granulites and the Bibong retrogressed eclogite yield a range of 12.0 -16.0 kbar and 800 -900℃, representing HP granulite facies conditions. The Sinri and Daepan granulites from the Hongseong area show relatively lower grade metamorphic conditions between HP granulite and normal granulite facies, and are characterized by sub-isothermal decompression during exhumation. The similarities in the metamorphic ages and the post-collisional igneous activity from the central western Korean Peninsula indicate that the Triassic ages represent the retrograde stage of the metamorphic Pe T paths. In contrast, the Late Permian metamorphic ages, which are older than protolith ages of the post-collisional igneous rocks, correspond to the possible prograde stage of metamorphism. The P-T-t paths presented in this paper, together with the metamorphic ages and post-orogenic igneous events reported from these areas suggest trace of the subduction, accretion and exhumation history, and indicate a tectonic linkage among the northeast Asian continents during the Paleo-Tethyan Ocean closure.展开更多
The 7xxx series alloys are heat treatable wrought aluminium alloys based on the Al-Zn-Mg（-Cu） system. They are widely used in high-performance structural aerospace and transportation applications. Apart from composi...The 7xxx series alloys are heat treatable wrought aluminium alloys based on the Al-Zn-Mg（-Cu） system. They are widely used in high-performance structural aerospace and transportation applications. Apart from compositional, casting and thermo-mechanical processing effects, the balance of properties is also significantly influenced by the way in which the materials are heat-treated. This paper describes the effects of homogenisation, solution treatment, quenching and ageing treatments on the evolution of the microstructure and properties of some important medium to high-strength 7xxx alloys. With a focus on recent work at Monash University, where the whole processing route from homogenisation to final ageing has been studied for thick plate products, it is reported how microstructural features such as dispersoids, coarse constituent particles, fine-scale precipitates, grain structure and grain boundary characteristics can be controlled by heat treatment to achieve improved microstructure-property combinations. In particular, the paper presents methods for dissolving unwanted coarse constituent particles by controlled high- temperature treatments, quench sensitivity evaluations based on a systematic study of continuous cooling precipitation behaviour, and ageing investigations of one-, two- and three-step ageing treatments using experimental and modelling approaches, in each case, the effects on both the microstructure and the resulting properties are discussed.展开更多
In the gneisses from the drillhole ZK2304 of the Donghai area, there have been preserved high- and ultrahigh-pressure metamorphic mineral assemblages, a series of complicated retrogressive textures and relevant metamo...In the gneisses from the drillhole ZK2304 of the Donghai area, there have been preserved high- and ultrahigh-pressure metamorphic mineral assemblages, a series of complicated retrogressive textures and relevant metamorphic reactions. In addition to garnet, jadeititic-clinopyroxene and rutile, other peak stage (M2) minerals in some gneisses include phengite, aragonite and coesite or quartz pseudomorphs after coesite. The typical peak-stage mineral assemblages in gneisses are characterized by garnet + jadeitic-clinopyroxene + rutile + coesite, garnet + jadeitic-clinopyroxene + phengite + rutile ± coesite and garnet + jadeitic-clinopyroxene + aragonite + rutile ± coesite. The grossular content (Gro) in garnet is high and may reach 50. 1 mol%. The SiO2 content of phengite ranges from 54.37% to 54.84% with 3.54-3.57 p.f.u. Quartz pseudomorphs after coesite occur as inclusions in garnet.The gneisses of the Donghai area have been subjected to multistage recrystallization and exhibit a closewise P-T evolutional path characterized by the near-isothermal decompression. The inclusion assemblage (Hb+Ep+Bi+Pl+Qz) within garnet and other minerals has recorded a pre-peak stage (Mi) epidote amphibole fades metamorphic event. High- and ultrahigh-pressure peak metamorphism (M2) took place at T=750-860℃ and P>2.7 GPa. The symplectitic assemblages after garnet, jadeitic-clinopyroxene and rutile imply a near-isothermal decompression metamorphism (M3, M4) during the rapid exhumation. Several lines of evidence of petrography and metamorphic reactions indicate that both gneisses and eclogites have experienced ultrahigh-pressure metamorphism in the Donghai area. This research may be of great significance for an in-depth study of the metamorphism and tectonic evolution in the Su-Lu ultrahigh-pressure metamorphic belt.展开更多
The effects of the retrogression heating rate(340℃/min,57℃/min,4.3℃/min)on the microstructures and mechanical properties of aluminum alloy 7050 were investigated by means of hardness measurement,tensile properties ...The effects of the retrogression heating rate(340℃/min,57℃/min,4.3℃/min)on the microstructures and mechanical properties of aluminum alloy 7050 were investigated by means of hardness measurement,tensile properties testing,differential scanning calorimetry(DSC)and transmission electron microscopy(TEM).The results show that the retrogression heating rate significantly affects the microstructures and mechanical properties of the alloys treated by retrogression and re-aging(RRA)process, and it is found that the medium rate(57℃/min)leads to the highest mechanical properties.The strengthening phases in the matrix are mainly the fine dispersed η′precipitates and GP zones,and the grain boundary precipitates are coarse and discontinuous η phases.展开更多
A retrogression process was applied to AA7075alloy at180,240and320°C for1,30,50,70,90and120min.After the retrogression,aging treatment was reapplied with T6conditions(120°C,24h).The mechanical properties of ...A retrogression process was applied to AA7075alloy at180,240and320°C for1,30,50,70,90and120min.After the retrogression,aging treatment was reapplied with T6conditions(120°C,24h).The mechanical properties of aged samples were determined by V-Charpy and hardness tests and also,physical properties of samples were determined by electrical conductivity tests.Moreover,microstructural properties were characterized by light microscope and transmission electron microscope.The results show that the effects of the temperature and the duration of the retrogression and reagent on the impact toughness and hardness are related to the precipitates at the grain boundary.展开更多
In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment(T6), retrogression and re-aging treatment(RRA), and multiple retrogressio...In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment(T6), retrogression and re-aging treatment(RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time(within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength(716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity(33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3%and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3 RRA60 treatment, a good combination of tensile strength(705 MPa) and electrical conductivity(33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.展开更多
The mechanical properties and stress corrosion cracking （SCC） resistance of an Al-Zn-Cu-Mg-Sc-Zr alloy under different aging conditions were investigated. The dependence of microstrueture and mechanical properties o...The mechanical properties and stress corrosion cracking （SCC） resistance of an Al-Zn-Cu-Mg-Sc-Zr alloy under different aging conditions were investigated. The dependence of microstrueture and mechanical properties on aging parameters was evaluated by tensile test, hardness test and conductivity measurement. The results show that for the alloys with retrogression and re-aging treatment （RRA）, the conductivity increases with the retrogression time and temperature, while the tensile strength decreases. The transmission electron microscopy （TEM） results show that the precipitates η（MgZn2） at grain boundary aggregate apparently with retrogression time and the precipitates inside the matrix exhibit the similar distribution to T6 temper, which comprises fine GP zones, large η＇（MgZn2）and η（MgZn2） phases. According to the mechanical properties and microstructure observations, the optimal RRA regime is recommended to be 120℃, 24h ＋ 180 ℃, 30 min ＋ 120 ℃, 24 h. The strength level of the alloy after the optimum RRA treatment is similar to that in T6 condition and the SCC resistance is improved obviously in contrast to T6 condition.展开更多
A study was conducted to better understand how different parameters, namely, regression aging time and regression aging temperature, affect the creep aging properties, i.e., the creep deformation and performance of Al...A study was conducted to better understand how different parameters, namely, regression aging time and regression aging temperature, affect the creep aging properties, i.e., the creep deformation and performance of Al-Zn-MgCu alloy during regressive reaging. The corresponding creep strain and mechanical properties of samples were studied by conducting creep tests and uniaxial tensile tests. The electrical conductivity was measured using an eddy-current conductivity meter. The microstructures were observed by transmission electron microscopy(TEM). With the increase in regression aging time, the steady creep strain first increased and then decreased, and reached the maximum at 45 min.The steady creep strain increased with the increase in regression aging temperature, and reached the maximum at 200 ℃.The level of steady creep strain was determined by precipitation and dislocation recovery. Creep aging strengthens 7B50-RRA treated with regression aging time at 190 ℃ for 10 min, and the difference in the mechanical properties of alloy becomes smaller. The diffusion of solute atoms reduces the scattering of electrons, leading to a significant improvement in electrical conductivity and stress corrosion cracking(SCC) resistance after creep aging. The findings of this study could help in the application of creep aging forming(CAF) technology in Al-Zn-Mg-Cu alloy under RRA treatment.展开更多
The channel at the estuary of the Weihe River to the Huanghe (Yellow) River has changed markedly since the 1970s. The Huanghe River has swung westwards about 5km and there was retrogressive deposition along the Weihe ...The channel at the estuary of the Weihe River to the Huanghe (Yellow) River has changed markedly since the 1970s. The Huanghe River has swung westwards about 5km and there was retrogressive deposition along the Weihe River. The mechanism and effect of channel evolution at the entrance of the Weihe River to the Huanghe River was analyzed with the survey data, historical statistic data and Landsat TM images of 1987 and 2002. Following conclusions were reached: 1) Physiognomy factors at the entrance, irrigation project and integrated environment evolvement in the Weihe River basin are the main factors for channel evolution at the entrance of the Weihe River to the Huanghe River. 2) The channel evolution not only reduces the ability of controling flood in the lower reaches of the Weihe River due to shrinking of the riverbed, but also increases the flood threat in the lower reaches of the Weihe River because the Huanghe River water inversely flows into the Weihe River. And there is a complexion of small flux, high water level and big disaster, which leads to the expansion of the alkali-saline cropland in the conflux area of the two rivers. 3) The regionalism and local protection must be broken to implement the integrated planning of the watershed and to decline the height of Tongguan to stabilize the physiognomy at the estuary.展开更多
In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sour...In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sources,particle sizes of silica flour,and additions of silica fume,alumina,colloidal iron oxide and nano-graphene,were investigated.To simulate the environment of cementing geothermal wells and deep wells,cement slurries were directly cured at 50 MPa and 200?C.Mineral compositions(as determined by X-ray diffraction Rietveld refinement),water permeability,compressive strength and Young’s modulus were used to evaluate the qualities of the set cement.Short-term curing(2e30 d)test results indicated that the adoption of 6 m m ultrafine crystalline silica played the most important role in stabilizing the mechanical properties of oil well cement systems,while the addition of silica fume had a detrimental effect on strength stability.Long-term curing(2e180 d)test results indicated that nano-graphene could stabilize the Young’s modulus of oil well cement systems.However,none of the ad-mixtures studied here can completely prevent the strength retrogression phenomenon due to their inability to stop the conversion of amorphous to crystalline phases.展开更多
In order to improve the through-thickness homogeneity and properties of aviation aluminum alloy thick plate.The effect of heating-cooling retrogression and re-ageing on the performance of Al-8Zn-2Mg-2Cu alloy thick pl...In order to improve the through-thickness homogeneity and properties of aviation aluminum alloy thick plate.The effect of heating-cooling retrogression and re-ageing on the performance of Al-8Zn-2Mg-2Cu alloy thick plate was investigated by hardness tests, electrical conductivity tests and transmission electron microscopy(TEM) observation.Results revealed that, during retrogression heating, the fine pre-precipitates in surface layer dissolve more and the undissolved η′ or η phases are more coarsened than that of center layer. During slow cooling after retrogression,precipitates continue coarsening but with a lower rate and the secondary precipitation occurs in both layers. Finer precipitates resulting from the secondary precipitation are more in surface. However, the coarsening and secondary precipitation behaviors are restrained in both layers under quick cooling condition. The electrical conductivity and through-thickness homogeneity of precipitates increases while the hardness decreases with cooling rate decreasing. After the optimized non-isothermal retrogression and re-ageing(NRRA) including air-cooling retrogression, the throughthickness homogeneity which is evaluated by integrated retrogression effects has been improved to 94%. The tensile strength, fracture toughness and exfoliation corrosion grade of Al-8Zn-2Mg-2Cu alloy plate is 619 MPa, 24.7 MPa·m^(1/2)and EB, respectively, which indicates that the non-isothermal retrogression and re-aging(NRRA) could improve the mechanical properties and corrosion resistance with higher through-thickness homogeneity.展开更多
Retrogressive landslides are common geological phenomena in mountainous areas and on onshore and offshore slopes. The impact of retrogressive landslides is different from that of other landslide types due to the pheno...Retrogressive landslides are common geological phenomena in mountainous areas and on onshore and offshore slopes. The impact of retrogressive landslides is different from that of other landslide types due to the phenomenon of retrogression. The hazards caused by retrogressive landslides may be increased because retrogressive landslides usually affect housing, facilities, and infrastructure located far from the original slopes. Additionally, substantial geomorphic evidence shows that the abundant supply of loose sediment in the source area of a debris flow is usually provided by retrogressive landslides that are triggered by the undercutting of water. Moreover, according to historic case studies, some large landslides are the evolution result of retrogressive landslides. Hence the ability to understand and predict the evolution of retrogressive landslides is crucial for the purpose of hazard mitigation. This paper discusses the phenomenon of a retrogressive landslide by using a model experiment and suggests a reasonably simplified numerical approach for the prediction of rainfall-induced retrogressive landslides. The simplified numerical approach, which combines the finite element method for seepage analysis, the shear strength reduction finite element method, and the analysis criterion for the retrogression and accumulation effect, is presented and used to predict the characteristics of a retrogressive landslide. The results show that this numerical approach is capable of reasonably predicting the characteristics of retrogressive landslides under rainfall infiltration, particularly the magnitude of each landslide, the position of the slip surface, and the development processes of the retrogressive landslide. Therefore, this approach is expected to be a practical method for the mitigation of damage caused by rainfall-induced retrogressive landslides.展开更多
Under the rapidly warming climate in the Arctic and high mountain areas,permafrost is thawing,leading to various hazards at a global scale.One common permafrost hazard termed retrogressive thaw slump(RTS)occurs extens...Under the rapidly warming climate in the Arctic and high mountain areas,permafrost is thawing,leading to various hazards at a global scale.One common permafrost hazard termed retrogressive thaw slump(RTS)occurs extensively in ice-rich permafrost areas.Understanding the spatial and temporal distributive features of RTSs in a changing climate is crucial to assessing the damage to infrastructure and decision-making.To this end,we used a machine learning-based model to investigate the environmental factors that could lead to RTS occurrence and create a susceptibility map for RTS along the Qinghai-Tibet Engineering Corridor(QTEC)at a local scale.The results indicate that extreme summer climate events(e.g.,maximum air temperature and rainfall)contributes the most to the RTS occurrence over the flat areas with fine-grained soils.The model predicts that 13%(ca.22,948 km^(2))of the QTEC falls into high to very high susceptibility categories under the current climate over the permafrost areas with mean annual ground temperature at 10 m depth ranging from-3 to-1℃.This study provides insights into the impacts of permafrost thaw on the stability of landscape,carbon stock,and infrastructure,and the results are of value for engineering planning and maintenance.展开更多
Under global warming,permafrost around the world is experiencing degradation which is especially so on the Third Pole,the Qinghai-Tibet Plateau(QTP),China.Retrogressive thaw slump(RTS)is one of the thermokarst feature...Under global warming,permafrost around the world is experiencing degradation which is especially so on the Third Pole,the Qinghai-Tibet Plateau(QTP),China.Retrogressive thaw slump(RTS)is one of the thermokarst features caused by rapid degradation of ice rich permafrost,which transforms landforms and threatens infrastructures,and even affects the terrestrial carbon cycle.In this work,vegetation communities surrounding a RTS in the Fenghuoshan Mountains of the interior portion of the Qinghai-Tibet Plateau have been investigated to examine the impact from RTS.This investigation indicates that the occurrence of RTS influences the vegetation community by altering their habitats,especially the soil water content,which forces the vegetation community to evolve in order to adapt to the alterations.In the interior part of RTS where it has been disturbed tremendously,alterations have produced a wider niche and richer plant species.This favors species of a wet environment in a habitat where it was a relatively dry environment of alpine steppe prior to the occurrence of RTS.This study adds to limited observations regarding the impact of RTS to vegetation community on the QTP and helps us to reach a broader understanding of the effects of permafrost degradation as well as global warming.展开更多
Petrographic comparison of andalusite in the contact aureole of the Fangshan pluton, Zhoukoudian, Beijing, China, and hornfels in the aureole of the Markfield diorite, Leicestershire, Eng- land, shows that spots chara...Petrographic comparison of andalusite in the contact aureole of the Fangshan pluton, Zhoukoudian, Beijing, China, and hornfels in the aureole of the Markfield diorite, Leicestershire, Eng- land, shows that spots characteristic of the outer zones of contact metamorphic aureoles did not form during the progressive stage of contact metamorphism, but are pseudomorphs after earlier andalusite with characteristic chiastolite microstructure. The baked margin produced by contact metamorphism of syenite against a dyke in the Houshihushan ring complex, Shanhaiguan, Hebei Province, China, is an unusual feature caused by the dyke＇s role as a feeder to a family of cone-sheets.展开更多
The long-term strength retrogression of silica-enriched oil well cement poses a significant threat to wellbore integrity in deep and ultra-deep wells, which is a major obstacle for deep petroleum and geothermal energy...The long-term strength retrogression of silica-enriched oil well cement poses a significant threat to wellbore integrity in deep and ultra-deep wells, which is a major obstacle for deep petroleum and geothermal energy development. Previous attempts to address this problem has been unsatisfactory because they can only reduce the strength decline rate. This study presents a new solution to this problem by incorporating fly ash to the traditional silica-cement systems. The influences of fly ash and silica on the strength retrogression behavior of oil well cement systems directly set and cured under the condition of 200°C and 50 MPa are investigated. Test results indicate that the slurries containing only silica or fly ash experience severe strength retrogression from 2 to 30 d curing, while the slurries containing both fly ash and silica experience strength enhancement from 2 to 90 d. The strength test results are corroborated by further evidences from permeability tests as well as microstructure analysis of set cement. Composition of set cement evaluated by quantitative X-ray diffraction analyses with partial or no known crystal structure(PONKCS) method and thermogravimetry analyses revealed that the conversion of amorphous C-(A)-S-H to crystalline phases is the primary cause of long-term strength retrogression.The addition of fly ash can reduce the initial amount of C-(A)-S-H in the set cement, and its combined use with silica can prevent the crystallization of C-(A)-S-H, which is believed to be the working mechanism of this new admixture in improving long-term strength stability of oil well cement systems.展开更多
基金supported by the National Key Research and Development Program of China(No.2024YFC2815400)the European Commission(Nos.HORIZON MSCA-2024-PF-01 and 101200637)+2 种基金the Opening Fund of the State Key Laboratory of Water Resources Engineering and Management at Wuhan University(No.2024SGG07)the Shandong Provincial Natural Science Foundation(No.ZR2025MS647)the Sand Hazards and Opportunities for Resilience,Energy,and Sustainability(SHORES)Center,funded by Tamkeen under the NYUAD Research Institute Award CG013.
文摘Retrogressive landslides in sensitive clays pose significant risks to nearby infrastructure,as natural toe erosion or localized disturbances can trigger progressive block failures.While prior studies have largely relied on two-dimensional(2D)large-deformation analyses,such models overlook key three-dimensional(3D)failure mechanisms and variability effects.This study develops a 3D probabilistic framework by integrating the Coupled Eulerian–Lagrangian(CEL)method with random field theory to simulate retrogressive landslides in spatially variable clay.Using Monte Carlo simulations,we compare 2D and 3D random large-deformation models to evaluate failure modes,runout distances,sliding velocities,and influence zones.The 3D analyses captured more complex failure modes—such as lateral retrogression and asynchronous block mobilization across slope width.Additionally,the 3D analyses predict longer mean runout distances(13.76 vs.11.92 m),wider mean influence distance(11.35 vs.8.73 m),and higher mean sliding velocities(4.66 vs.3.94 m/s)than their 2D counterparts.Moreover,3D models exhibit lower coefficients of variation(e.g.,0.10 for runout distance)due to spatial averaging across slope width.Probabilistic hazard assessment shows that 2D models significantly underpredict near-field failure probabilities(e.g.,48.8%vs.89.9%at 12 m from the slope toe).These findings highlight the limitations of 2D analyses and the importance of multi-directional spatial variability for robust geohazard assessments.The proposed 3D framework enables more realistic prediction of landslide mobility and supports the design of safer,risk-informed infrastructure.
基金The Second Tibetan Plateau Scientific Expedition and Research,No.2022QZKK0101National Natural Science Foundation of China,No.42271427。
文摘The thawing of ice-rich permafrost leads to the formation of thermokarst landforms.Precise mapping of retrogressive thaw slumps(RTSs)is imperative for assessing the degradation and carbon exchange of permafrost at both local and regional scales on the Tibetan Plateau(TP).However,previous methods for RTSs mapping rely on a large number of samples and complex classifiers with low automation level or unnecessary complexity.We propose an automatic mapping network(AmRTSNet)for producing decimeter-level RTSs maps from GaoFen-7 images based on deep learning.Both the quantitative metrics and qualitative evaluations show that AmRTSNet trained in the Beiluhe offers significant advantages over previous methods.Without further fine-tuning,we conducted RTSs automatic mapping based on AmRTSNet in the Wulanwula,Chumarhe,and Gaolinggo.Over 141,312 ha on the TP have been automatically mapped,comprising 926 RTS regions with a total RTS area of 2318.72 ha.The average statistics of the mapped RTSs show low roundness(0.38),moderate rectangularity(0.61),and high convexity(0.79).About 90%of the RTSs are smaller than 6 ha.The average aspect ratio is 2.18.RTSs are unevenly distributed in belt-like aggregations with dominant density peaks.RTSs often concentrate in hillslopes and along lateral streams,with more dense areas more likely to have larger RTSs.
基金Projects (2010CB731701,2012CB619502) supported by the National Basic Research Program of ChinaProject (50721003) supported by the Creative Research Group of National Natural Science Foundation of China
文摘Influence of dual retrogression and re-aging（dual-RRA） temper on microstructure,strength and exfoliation corrosion（EC） behavior of Al-Zn-Mg-Cu alloy was investigated by hardness measurements,tensile properties tests,exfoliation corrosion tests,transmission electron microscopy（TEM） and scanning electron microscopy（SEM） observation combined energy dispersive X-ray detector（EDX） analysis.Dual-RRA temper maintains the matrix precipitates（MPs） similar to RRA temper,meanwhile obtains coarser and sparser grain boundary precipitates（GBPs） as well as higher Cu and lower Zn content compared with T76 temper.Therefore,dual-RRA temper not only keeps strength equivalent to the RRA temper but also obtains higher EC resistance than T76 temper.
基金Project(2012CB619505)supported by the National Basic Research Program of China
文摘The retrogression kinetics for grain boundary precipitate （GBP） of 7A55 aluminum alloy was investigated by transmission electron microscopy （TEM） observation. The results reveal that the coarsening behavior of GBP obeys “LSW” theory, namely, the cube of GBP average size has a linear dependence relation to retrogression time, and the coarsening rate accelerates at the elevated retrogression temperature. The GBP coarsening activation energy Qo of （115.2±1.3） kJ/mol is obtained subsequently. Taking the retrogression treatment schedule of 190℃, 45 min derived from AA7055 thin plate as reference, the non-isothermal retrogression model for GBP coarsening behavior is established based on “LSW”theory and “iso-kinetics” solution, which includes an Arrhenius form equation. After that, the average size of GBP r（t） is predicted successfully at any non-isothermal process T（t） when the initial size of GBP r0 is given. Finally, the universal characterization method for the microstructure homogeneity along the thickness direction of TA55 aluminum alloy thick plate is also set up.
基金supported by a Basic Research Project (GP2017021 Development of integrated geological information based on digital mapping) of the Korea Institute of Geoscience and Mineral Resources (KIGAM)+1 种基金funded by the Ministry of Science, Information, Communication and Technology (ICT),and Future Planning, Koreasupported partially by the Basic Science Research Program through the National Research Foundation (NRF) funded by the Ministry of Science and ICT 2013R1A1A2058070, 2017R1D1A1B04028521 to H.S. Kim, and 2015R1D1A1A09058914, 2017R1A6A1A07015374 to S. Kwon
文摘Permo-Triassic high-pressure(HP) mafic granulites, together with the Bibong retrogressed eclogite,preserved along the central western Korean Peninsula provide important insights into the Late Permian to Triassic collisional orogeny in northeast Asia. The metamorphic pressureetemperatureetime(P-T-t)paths of these rocks, however, remain poorly constrained and even overestimated, owing to outdated geothermobarometers and inaccurate isopleth techniques. Here we evaluate the metamorphic Pe T conditions of Triassic HP mafic granulites including those in Baekdong, Sinri and Daepan and the Bibong Triassic retrogressed eclogite in the Hongseong area, and the Permo-Triassic Samgot mafic granulite in the Imjingang Belt of the central western Korean Peninsula through the application of modern phase equilibria techniques. The Baekdong and Samgot mafic granulites and the Bibong retrogressed eclogite yield a range of 12.0 -16.0 kbar and 800 -900℃, representing HP granulite facies conditions. The Sinri and Daepan granulites from the Hongseong area show relatively lower grade metamorphic conditions between HP granulite and normal granulite facies, and are characterized by sub-isothermal decompression during exhumation. The similarities in the metamorphic ages and the post-collisional igneous activity from the central western Korean Peninsula indicate that the Triassic ages represent the retrograde stage of the metamorphic Pe T paths. In contrast, the Late Permian metamorphic ages, which are older than protolith ages of the post-collisional igneous rocks, correspond to the possible prograde stage of metamorphism. The P-T-t paths presented in this paper, together with the metamorphic ages and post-orogenic igneous events reported from these areas suggest trace of the subduction, accretion and exhumation history, and indicate a tectonic linkage among the northeast Asian continents during the Paleo-Tethyan Ocean closure.
基金The Aluminium Corporation of China Ltd.(Chalco)for supporting aspects of this work financiallyproviding AA7150 materials as part of the Australia-China International Centre for Light Alloy Research(ICLAR)+1 种基金Monash University for developing the retrogression and reageing Matlab model (as part of the PhD project of Dr Adrian GROSVENOR)The ARC Centre of Excellence for Design in Light Metals and its Directors (first Prof Barry MUDDLE and then Prof Xin-hua WU) for supporting
文摘The 7xxx series alloys are heat treatable wrought aluminium alloys based on the Al-Zn-Mg（-Cu） system. They are widely used in high-performance structural aerospace and transportation applications. Apart from compositional, casting and thermo-mechanical processing effects, the balance of properties is also significantly influenced by the way in which the materials are heat-treated. This paper describes the effects of homogenisation, solution treatment, quenching and ageing treatments on the evolution of the microstructure and properties of some important medium to high-strength 7xxx alloys. With a focus on recent work at Monash University, where the whole processing route from homogenisation to final ageing has been studied for thick plate products, it is reported how microstructural features such as dispersoids, coarse constituent particles, fine-scale precipitates, grain structure and grain boundary characteristics can be controlled by heat treatment to achieve improved microstructure-property combinations. In particular, the paper presents methods for dissolving unwanted coarse constituent particles by controlled high- temperature treatments, quench sensitivity evaluations based on a systematic study of continuous cooling precipitation behaviour, and ageing investigations of one-, two- and three-step ageing treatments using experimental and modelling approaches, in each case, the effects on both the microstructure and the resulting properties are discussed.
文摘In the gneisses from the drillhole ZK2304 of the Donghai area, there have been preserved high- and ultrahigh-pressure metamorphic mineral assemblages, a series of complicated retrogressive textures and relevant metamorphic reactions. In addition to garnet, jadeititic-clinopyroxene and rutile, other peak stage (M2) minerals in some gneisses include phengite, aragonite and coesite or quartz pseudomorphs after coesite. The typical peak-stage mineral assemblages in gneisses are characterized by garnet + jadeitic-clinopyroxene + rutile + coesite, garnet + jadeitic-clinopyroxene + phengite + rutile ± coesite and garnet + jadeitic-clinopyroxene + aragonite + rutile ± coesite. The grossular content (Gro) in garnet is high and may reach 50. 1 mol%. The SiO2 content of phengite ranges from 54.37% to 54.84% with 3.54-3.57 p.f.u. Quartz pseudomorphs after coesite occur as inclusions in garnet.The gneisses of the Donghai area have been subjected to multistage recrystallization and exhibit a closewise P-T evolutional path characterized by the near-isothermal decompression. The inclusion assemblage (Hb+Ep+Bi+Pl+Qz) within garnet and other minerals has recorded a pre-peak stage (Mi) epidote amphibole fades metamorphic event. High- and ultrahigh-pressure peak metamorphism (M2) took place at T=750-860℃ and P>2.7 GPa. The symplectitic assemblages after garnet, jadeitic-clinopyroxene and rutile imply a near-isothermal decompression metamorphism (M3, M4) during the rapid exhumation. Several lines of evidence of petrography and metamorphic reactions indicate that both gneisses and eclogites have experienced ultrahigh-pressure metamorphism in the Donghai area. This research may be of great significance for an in-depth study of the metamorphism and tectonic evolution in the Su-Lu ultrahigh-pressure metamorphic belt.
基金Project(2005CB623700) supported by the National Basic Research Program of China
文摘The effects of the retrogression heating rate(340℃/min,57℃/min,4.3℃/min)on the microstructures and mechanical properties of aluminum alloy 7050 were investigated by means of hardness measurement,tensile properties testing,differential scanning calorimetry(DSC)and transmission electron microscopy(TEM).The results show that the retrogression heating rate significantly affects the microstructures and mechanical properties of the alloys treated by retrogression and re-aging(RRA)process, and it is found that the medium rate(57℃/min)leads to the highest mechanical properties.The strengthening phases in the matrix are mainly the fine dispersed η′precipitates and GP zones,and the grain boundary precipitates are coarse and discontinuous η phases.
基金supported by Yildiz Technical University Scientific Research Project Unit under Contract No:2016-07-02-DOP02
文摘A retrogression process was applied to AA7075alloy at180,240and320°C for1,30,50,70,90and120min.After the retrogression,aging treatment was reapplied with T6conditions(120°C,24h).The mechanical properties of aged samples were determined by V-Charpy and hardness tests and also,physical properties of samples were determined by electrical conductivity tests.Moreover,microstructural properties were characterized by light microscope and transmission electron microscope.The results show that the effects of the temperature and the duration of the retrogression and reagent on the impact toughness and hardness are related to the precipitates at the grain boundary.
基金financially supported by National Key Research and Development Program of China (No.2016YFB0300901)。
文摘In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment(T6), retrogression and re-aging treatment(RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time(within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength(716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity(33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3%and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3 RRA60 treatment, a good combination of tensile strength(705 MPa) and electrical conductivity(33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.
基金Project(2006AA03Z523) supported by the National High-tech Research and Development Program of China
文摘The mechanical properties and stress corrosion cracking （SCC） resistance of an Al-Zn-Cu-Mg-Sc-Zr alloy under different aging conditions were investigated. The dependence of microstrueture and mechanical properties on aging parameters was evaluated by tensile test, hardness test and conductivity measurement. The results show that for the alloys with retrogression and re-aging treatment （RRA）, the conductivity increases with the retrogression time and temperature, while the tensile strength decreases. The transmission electron microscopy （TEM） results show that the precipitates η（MgZn2） at grain boundary aggregate apparently with retrogression time and the precipitates inside the matrix exhibit the similar distribution to T6 temper, which comprises fine GP zones, large η＇（MgZn2）and η（MgZn2） phases. According to the mechanical properties and microstructure observations, the optimal RRA regime is recommended to be 120℃, 24h ＋ 180 ℃, 30 min ＋ 120 ℃, 24 h. The strength level of the alloy after the optimum RRA treatment is similar to that in T6 condition and the SCC resistance is improved obviously in contrast to T6 condition.
基金Project(2017YFB0306300) supported by the National key R&D Program of ChinaProjects(51675538, 51905551)supported by the National Natural Science Foundation of ChinaProject(ZZYJKT2019-11) supported by Free Exploration Project of State Key Laboratory of High performance Complex Manufacturing,China。
文摘A study was conducted to better understand how different parameters, namely, regression aging time and regression aging temperature, affect the creep aging properties, i.e., the creep deformation and performance of Al-Zn-MgCu alloy during regressive reaging. The corresponding creep strain and mechanical properties of samples were studied by conducting creep tests and uniaxial tensile tests. The electrical conductivity was measured using an eddy-current conductivity meter. The microstructures were observed by transmission electron microscopy(TEM). With the increase in regression aging time, the steady creep strain first increased and then decreased, and reached the maximum at 45 min.The steady creep strain increased with the increase in regression aging temperature, and reached the maximum at 200 ℃.The level of steady creep strain was determined by precipitation and dislocation recovery. Creep aging strengthens 7B50-RRA treated with regression aging time at 190 ℃ for 10 min, and the difference in the mechanical properties of alloy becomes smaller. The diffusion of solute atoms reduces the scattering of electrons, leading to a significant improvement in electrical conductivity and stress corrosion cracking(SCC) resistance after creep aging. The findings of this study could help in the application of creep aging forming(CAF) technology in Al-Zn-Mg-Cu alloy under RRA treatment.
基金Under the auspices of the National Natural Science Foundation of China (No. 40501077), Open Foundation of KeyLaboratory of Western China's Environmental Systems of Ministry of Education, Foundation of Key Laboratory of Shaanxi Province(No. 02JS38)
文摘The channel at the estuary of the Weihe River to the Huanghe (Yellow) River has changed markedly since the 1970s. The Huanghe River has swung westwards about 5km and there was retrogressive deposition along the Weihe River. The mechanism and effect of channel evolution at the entrance of the Weihe River to the Huanghe River was analyzed with the survey data, historical statistic data and Landsat TM images of 1987 and 2002. Following conclusions were reached: 1) Physiognomy factors at the entrance, irrigation project and integrated environment evolvement in the Weihe River basin are the main factors for channel evolution at the entrance of the Weihe River to the Huanghe River. 2) The channel evolution not only reduces the ability of controling flood in the lower reaches of the Weihe River due to shrinking of the riverbed, but also increases the flood threat in the lower reaches of the Weihe River because the Huanghe River water inversely flows into the Weihe River. And there is a complexion of small flux, high water level and big disaster, which leads to the expansion of the alkali-saline cropland in the conflux area of the two rivers. 3) The regionalism and local protection must be broken to implement the integrated planning of the watershed and to decline the height of Tongguan to stabilize the physiognomy at the estuary.
基金Financial support comes from China National Natural Science Foundation(Grant No.51974352)as well as from China University of Petroleum(East China)(Grant Nos.2018000025 and 2019000011)。
文摘In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sources,particle sizes of silica flour,and additions of silica fume,alumina,colloidal iron oxide and nano-graphene,were investigated.To simulate the environment of cementing geothermal wells and deep wells,cement slurries were directly cured at 50 MPa and 200?C.Mineral compositions(as determined by X-ray diffraction Rietveld refinement),water permeability,compressive strength and Young’s modulus were used to evaluate the qualities of the set cement.Short-term curing(2e30 d)test results indicated that the adoption of 6 m m ultrafine crystalline silica played the most important role in stabilizing the mechanical properties of oil well cement systems,while the addition of silica fume had a detrimental effect on strength stability.Long-term curing(2e180 d)test results indicated that nano-graphene could stabilize the Young’s modulus of oil well cement systems.However,none of the ad-mixtures studied here can completely prevent the strength retrogression phenomenon due to their inability to stop the conversion of amorphous to crystalline phases.
基金Project(51801082) supported by National Natural Science Foundation of ChinaProjects(GY2021003, GY2021020)supported by the Key Research and Development Program of Zhenjiang City,China+1 种基金Project(KYCX21_3453) supported by Graduate Research and Innovation Projects in Jiangsu Province,ChinaProject(202110289002Z) supported by Undergraduate Innovation and Entrepreneurship Training Program of Jiangsu Province,China。
文摘In order to improve the through-thickness homogeneity and properties of aviation aluminum alloy thick plate.The effect of heating-cooling retrogression and re-ageing on the performance of Al-8Zn-2Mg-2Cu alloy thick plate was investigated by hardness tests, electrical conductivity tests and transmission electron microscopy(TEM) observation.Results revealed that, during retrogression heating, the fine pre-precipitates in surface layer dissolve more and the undissolved η′ or η phases are more coarsened than that of center layer. During slow cooling after retrogression,precipitates continue coarsening but with a lower rate and the secondary precipitation occurs in both layers. Finer precipitates resulting from the secondary precipitation are more in surface. However, the coarsening and secondary precipitation behaviors are restrained in both layers under quick cooling condition. The electrical conductivity and through-thickness homogeneity of precipitates increases while the hardness decreases with cooling rate decreasing. After the optimized non-isothermal retrogression and re-ageing(NRRA) including air-cooling retrogression, the throughthickness homogeneity which is evaluated by integrated retrogression effects has been improved to 94%. The tensile strength, fracture toughness and exfoliation corrosion grade of Al-8Zn-2Mg-2Cu alloy plate is 619 MPa, 24.7 MPa·m^(1/2)and EB, respectively, which indicates that the non-isothermal retrogression and re-aging(NRRA) could improve the mechanical properties and corrosion resistance with higher through-thickness homogeneity.
基金supported by the National Basic Research Program of China(Grant No.2014CB44701)the National Natural Science Foundation of China(NSFC)(Grants No.41272283,40902080,41130753)
文摘Retrogressive landslides are common geological phenomena in mountainous areas and on onshore and offshore slopes. The impact of retrogressive landslides is different from that of other landslide types due to the phenomenon of retrogression. The hazards caused by retrogressive landslides may be increased because retrogressive landslides usually affect housing, facilities, and infrastructure located far from the original slopes. Additionally, substantial geomorphic evidence shows that the abundant supply of loose sediment in the source area of a debris flow is usually provided by retrogressive landslides that are triggered by the undercutting of water. Moreover, according to historic case studies, some large landslides are the evolution result of retrogressive landslides. Hence the ability to understand and predict the evolution of retrogressive landslides is crucial for the purpose of hazard mitigation. This paper discusses the phenomenon of a retrogressive landslide by using a model experiment and suggests a reasonably simplified numerical approach for the prediction of rainfall-induced retrogressive landslides. The simplified numerical approach, which combines the finite element method for seepage analysis, the shear strength reduction finite element method, and the analysis criterion for the retrogression and accumulation effect, is presented and used to predict the characteristics of a retrogressive landslide. The results show that this numerical approach is capable of reasonably predicting the characteristics of retrogressive landslides under rainfall infiltration, particularly the magnitude of each landslide, the position of the slip surface, and the development processes of the retrogressive landslide. Therefore, this approach is expected to be a practical method for the mitigation of damage caused by rainfall-induced retrogressive landslides.
基金funded by the National Natural Science Foundation of China(42372334)the Science and Technology Research and Development Program of the Qinghai-Tibet Group Corporation(Grant No.QZ2022-G05)。
文摘Under the rapidly warming climate in the Arctic and high mountain areas,permafrost is thawing,leading to various hazards at a global scale.One common permafrost hazard termed retrogressive thaw slump(RTS)occurs extensively in ice-rich permafrost areas.Understanding the spatial and temporal distributive features of RTSs in a changing climate is crucial to assessing the damage to infrastructure and decision-making.To this end,we used a machine learning-based model to investigate the environmental factors that could lead to RTS occurrence and create a susceptibility map for RTS along the Qinghai-Tibet Engineering Corridor(QTEC)at a local scale.The results indicate that extreme summer climate events(e.g.,maximum air temperature and rainfall)contributes the most to the RTS occurrence over the flat areas with fine-grained soils.The model predicts that 13%(ca.22,948 km^(2))of the QTEC falls into high to very high susceptibility categories under the current climate over the permafrost areas with mean annual ground temperature at 10 m depth ranging from-3 to-1℃.This study provides insights into the impacts of permafrost thaw on the stability of landscape,carbon stock,and infrastructure,and the results are of value for engineering planning and maintenance.
基金funded by the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2021QZKK0201)the State Key Laboratory of Frozen Soil Engineering Funds(SKLFSE-ZT-202109)the fund of Qinghai Provincial Investigation Project“Study on permafrost degradation and its geological hazard effect”(E1490604).
文摘Under global warming,permafrost around the world is experiencing degradation which is especially so on the Third Pole,the Qinghai-Tibet Plateau(QTP),China.Retrogressive thaw slump(RTS)is one of the thermokarst features caused by rapid degradation of ice rich permafrost,which transforms landforms and threatens infrastructures,and even affects the terrestrial carbon cycle.In this work,vegetation communities surrounding a RTS in the Fenghuoshan Mountains of the interior portion of the Qinghai-Tibet Plateau have been investigated to examine the impact from RTS.This investigation indicates that the occurrence of RTS influences the vegetation community by altering their habitats,especially the soil water content,which forces the vegetation community to evolve in order to adapt to the alterations.In the interior part of RTS where it has been disturbed tremendously,alterations have produced a wider niche and richer plant species.This favors species of a wet environment in a habitat where it was a relatively dry environment of alpine steppe prior to the occurrence of RTS.This study adds to limited observations regarding the impact of RTS to vegetation community on the QTP and helps us to reach a broader understanding of the effects of permafrost degradation as well as global warming.
文摘Petrographic comparison of andalusite in the contact aureole of the Fangshan pluton, Zhoukoudian, Beijing, China, and hornfels in the aureole of the Markfield diorite, Leicestershire, Eng- land, shows that spots characteristic of the outer zones of contact metamorphic aureoles did not form during the progressive stage of contact metamorphism, but are pseudomorphs after earlier andalusite with characteristic chiastolite microstructure. The baked margin produced by contact metamorphism of syenite against a dyke in the Houshihushan ring complex, Shanhaiguan, Hebei Province, China, is an unusual feature caused by the dyke＇s role as a feeder to a family of cone-sheets.
基金National Natural Science Foundation of China(No.51974352 and No.52288101)China University of Petroleum(East China)(No.2018000025 and No.2019000011)。
文摘The long-term strength retrogression of silica-enriched oil well cement poses a significant threat to wellbore integrity in deep and ultra-deep wells, which is a major obstacle for deep petroleum and geothermal energy development. Previous attempts to address this problem has been unsatisfactory because they can only reduce the strength decline rate. This study presents a new solution to this problem by incorporating fly ash to the traditional silica-cement systems. The influences of fly ash and silica on the strength retrogression behavior of oil well cement systems directly set and cured under the condition of 200°C and 50 MPa are investigated. Test results indicate that the slurries containing only silica or fly ash experience severe strength retrogression from 2 to 30 d curing, while the slurries containing both fly ash and silica experience strength enhancement from 2 to 90 d. The strength test results are corroborated by further evidences from permeability tests as well as microstructure analysis of set cement. Composition of set cement evaluated by quantitative X-ray diffraction analyses with partial or no known crystal structure(PONKCS) method and thermogravimetry analyses revealed that the conversion of amorphous C-(A)-S-H to crystalline phases is the primary cause of long-term strength retrogression.The addition of fly ash can reduce the initial amount of C-(A)-S-H in the set cement, and its combined use with silica can prevent the crystallization of C-(A)-S-H, which is believed to be the working mechanism of this new admixture in improving long-term strength stability of oil well cement systems.
