In high-risk industrial environments like nuclear power plants,precise defect identification and localization are essential for maintaining production stability and safety.However,the complexity of such a harsh enviro...In high-risk industrial environments like nuclear power plants,precise defect identification and localization are essential for maintaining production stability and safety.However,the complexity of such a harsh environment leads to significant variations in the shape and size of the defects.To address this challenge,we propose the multivariate time series segmentation network(MSSN),which adopts a multiscale convolutional network with multi-stage and depth-separable convolutions for efficient feature extraction through variable-length templates.To tackle the classification difficulty caused by structural signal variance,MSSN employs logarithmic normalization to adjust instance distributions.Furthermore,it integrates classification with smoothing loss functions to accurately identify defect segments amid similar structural and defect signal subsequences.Our algorithm evaluated on both the Mackey-Glass dataset and industrial dataset achieves over 95%localization and demonstrates the capture capability on the synthetic dataset.In a nuclear plant's heat transfer tube dataset,it captures 90%of defect instances with75%middle localization F1 score.展开更多
An evaluation approach for the response time probability distribution of workflows based on the fluid stochastic Petri net formalism is presented. Firstly, some problems about stochastic workflow net modeling are disc...An evaluation approach for the response time probability distribution of workflows based on the fluid stochastic Petri net formalism is presented. Firstly, some problems about stochastic workflow net modeling are discussed. Then how to convert a stochastic workflow net model into a fluid stochastic Petri net model is described. The response time distribution can be obtained directly upon the transient state solution of the fluid stochastic Petri net model. In the proposed approach, there are not any restrictions on the structure of workflow models, and the processing times of workflow tasks can be modeled by using arbitrary probability distributions. Large workflow models can be efficiently tackled by recursively using a net reduction technique.展开更多
The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and develo...The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.展开更多
To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phen...To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.展开更多
The Fork-Join program consisting of K parallel tasks is a useful model for a large number of computing applications. When the parallel processor has multi-channels, later tasks may finish execution earlier than their ...The Fork-Join program consisting of K parallel tasks is a useful model for a large number of computing applications. When the parallel processor has multi-channels, later tasks may finish execution earlier than their earlier tasks and may join with tasks from other programs. This phenomenon is called exchangeable join (EJ), which introduces correlation to the task’s service time. In this work, we investigate the response time of multiprocessor systems with EJ with a new approach. We analyze two aspects of this kind of systems: exchangeable join (EJ) and the capacity constraint (CC). We prove that the system response time can be effectively reduced by EJ, while the reduced amount is constrained by the capacity of the multiprocessor. An upper bound model is constructed based on this analysis and a quick estimation algorithm is proposed. The approximation formula is verified by extensive simulation results, which show that the relative error of approximation is less than 5%.展开更多
The reliability of real-time embedded software directly determines the reliability of the whole real-time embedded sys- tem, and the effective software testing is an important way to ensure software quality and reliab...The reliability of real-time embedded software directly determines the reliability of the whole real-time embedded sys- tem, and the effective software testing is an important way to ensure software quality and reliability. Based on the analysis of the characteristics of real-time embedded software, the formal method is introduced into the real-time embedded software testing field and the real-time extended finite state machine （RT-EFSM） model is studied firstly. Then, the time zone division method of real-time embedded system is presented and the definition and description methods of time-constrained transition equivalence class （timeCTEC） are presented. Furthermore, the approaches of the testing sequence and test case generation are put forward. Finally, the proposed method is applied to a typical avionics real- time embedded software testing practice and the examples of the timeCTEC, testing sequences and test cases are given. With the analysis of the testing result, the application verification shows that the proposed method can effectively describe the real-time embedded software state transition characteristics and real-time requirements and play the advantages of the formal methods in accuracy, effectiveness and the automation supporting. Combined with the testing platform, the real-time, closed loop and automated simulation testing for real-time embedded software can be realized effectively.展开更多
In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing th...In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing the size of the dielectric rods. The structure benefits the interference effect mechanism. The contrast ratio of the photonic crystal AND logic gate is obtained as 6 d B. In addition to simplicity, the designed nano-resonator increases the bit rate of logic gate. The delay time and footprint of logic gate are respectively 0.32 ps and 146 μm2. The proposed photonic crystal AND logic gate can operate at a bit rate of 3.12 Tbit/s。展开更多
In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results sho...In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.展开更多
Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studi...Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.展开更多
This paper proposes a formal model of the automatic testing system for scheduling strategies in real-time UNIX and describes the algorithm of the key part of the system. The model of the system is an important technol...This paper proposes a formal model of the automatic testing system for scheduling strategies in real-time UNIX and describes the algorithm of the key part of the system. The model of the system is an important technology of the automatization of software development. According to the model presented in the paper, many different kinds of automatic testing systems can be designed and developed easily. At the end of the paper, the prototype proves the feasibility of the model and design.展开更多
The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil a...The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.展开更多
It is well-recognized that a transfer system response delay that reduces the test stability inevitably exists in real-time dynamic hybrid testing （RTDHT）. This paper focuses on the delay-dependent stability and adde...It is well-recognized that a transfer system response delay that reduces the test stability inevitably exists in real-time dynamic hybrid testing （RTDHT）. This paper focuses on the delay-dependent stability and added damping of SDOF systems in RTDHT. The exponential delay term is transferred into a rational fraction by the Pad6 approximation, and the delay-dependent stability conditions and instability mechanism of SDOF RTDHT systems are investigated by the root locus technique. First, the stability conditions are discussed separately for the cases of stiffness, mass, and damping experimental substructure. The use of root locus plots shows that the added damping effect and instability mechanism for mass are different from those for stiffness. For the stiffness experimental substructure case, the instability results from the inherent mode because of an obvious negative damping effect of the delay. For the mass case, the delay introduces an equivalent positive damping into the inherent mode, and instability occurs at an added high frequency mode. Then, the compound stability condition is investigated for a general case and the results show that the mass ratio may have both upper and lower limits to remain stable. Finally, a high-emulational virtual shaking table model is built to validate the stability conclusions.展开更多
CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identit...CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.展开更多
A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response anal...A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response analysis and signal generation tasks, and executed in two different target computers in real-time. One target computer implements the response analysis task, wherein a large time-step is used to solve the FE substructure, and another target computer implements the signal generation task, wherein an interpolation program is used to generate control signals in a small time-step to meet the input demand of the controller. By using this strategy, the scale of the FE numerical substructure simulation may be increased significantly. The proposed scheme is initially verified by two FE numerical substructure models with 98 and 1240 degrees of freedom （DOFs）. Thereafter, RTDHTs of a single frame-foundation structure are implemented where the foundation, considered as the numerical substructure, is simulated by the FE model with 1240 DOFs. Good agreements between the results of the RTDHT and those from the FE analysis in ABAQUS are obtained.展开更多
BACKGROUND Rapid molecular testing has revolutionized the management of suspected viral meningitis and encephalitis by providing an etiological diagnosis in<90 min with potential to improve outcomes and shorten inp...BACKGROUND Rapid molecular testing has revolutionized the management of suspected viral meningitis and encephalitis by providing an etiological diagnosis in<90 min with potential to improve outcomes and shorten inpatient stays.However,use of molecular assays can vary widely.AIM To evaluate current practice for molecular testing of pediatric cerebrospinal fluid(CSF)samples across the United Kingdom using a structured questionnaire.METHODS A structured telephone questionnaire survey was conducted between July and August 2020.Data was collected on the availability of viral CSF nucleic acid amplification testing(NAAT),criteria used for testing and turnaround times including the impact of the coronavirus disease 2019 pandemic.RESULTS Of 196/212(92%)microbiology laboratories responded;63/196(32%)were excluded from final analysis as they had no on-site microbiology laboratory and outsourced their samples.Of 133 Laboratories included in the study,47/133(35%)had onsite facilities for viral CSF NAAT.Hospitals currently undertaking onsite NAAT(n=47)had much faster turnaround times with 39 centers(83%)providing results in≤24 h as compared to those referring samples to neighboring laboratories(5/86;6%).CONCLUSION Onsite/near-patient rapid NAAT(including polymerase chain reaction)is recommended wherever possible to optimize patient management in the acute setting.展开更多
The paper intfoduces a PC-DSP based real-time digital simulator which is portable in size and aimed at the closed-loop testing of various types of protective relays for their design and application. The simulator can ...The paper intfoduces a PC-DSP based real-time digital simulator which is portable in size and aimed at the closed-loop testing of various types of protective relays for their design and application. The simulator can be widely used in not only concerning utilities but also manufacturers and research / certification institutes because of its many functions. The hardware architecture and software implementation of the simulator are described. The main features and functions of the simulator are also展开更多
Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced f...Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.展开更多
The reliability of the eddy current testing (ECT) in flaw detection is quantitatively evaluated by theprobability of detection (POD). Precise and efficient modeling of POD gives direction for the implement of ECTon si...The reliability of the eddy current testing (ECT) in flaw detection is quantitatively evaluated by theprobability of detection (POD). Precise and efficient modeling of POD gives direction for the implement of ECTon sites to avoid false or missing flaw detection. Traditional POD analysis focuses on single uncertain factor orsingle response signal with limited credibility in engineering. This paper considers multiple response signals andmultiple flaw parameters to perform POD. The flaw length, the flaw depth, the coil impedance, and the magneticflux density are comprehensively studied under various lift-off distances. A finite element model (FEM) of ECT isestablished and verified with experiments to obtain sufficient simulation data for discrete POD modeling. Thecontinuous POD function is then fitted based on the discrete values to show the superiority of integrating multiplefactors. A comparison with conventional POD analysis further demonstrates the higher reliability of ECT flawdetection considering multiple flaw parameters and multiple response signals, especially for small flaws.展开更多
Abstract Lognormal distribution is commonly used in engineering. It is also a life distribution of important research values. For long-life products follow this distribution, it is necessary to apply accelerated testi...Abstract Lognormal distribution is commonly used in engineering. It is also a life distribution of important research values. For long-life products follow this distribution, it is necessary to apply accelerated testing techniques to product demonstration. This paper describes the development of accelerated life testing sampling plans （ALSPs） for lognormal distribution under time-censoring conditions. ALSPs take both producer and consumer risks into account, and they can be designed to work whether acceleration factor （AF） is known or unknown. When AF is known, lift testing is assumed to be conducted under accelerated conditions with time-censoring. The producer and con- sumer risks are satisfied, and the size of test sample and the size of acceptance number arc opti- mized. Then sensitivity analyses are conducted. When AF is unknown, two or more predetermined levels of accelerated stress are used. The sample sizes and sample proportion allo- cated to each stress level are optimized. The acceptance constant that satisfies producer and consumer risk is obtdned by minimizing the generalized asymptotic variance of the test statistics. Finally, the properties of the two ALSPs （one for known-AF conditions and one for unknown AF conditions） are investigated to show that the proposed method is corrcct and usablc through numerical examples.展开更多
With the rapid development and commercialization of wireless communications,the execution of OTA testing requires a tremendous amount of test time.Therefore,test time reduction is of great significance.The objective o...With the rapid development and commercialization of wireless communications,the execution of OTA testing requires a tremendous amount of test time.Therefore,test time reduction is of great significance.The objective of this article is to determine optimal measurement grids for SISO OTA testing of 5G Sub-6 GHz user equipments(UEs)in anechoic chamber with satisfactory accuracy and efficiency.The effect of different grid configurations on OTA performance is analyzed quantitatively using reference radiation patterns at different bands.These patterns are utilized to mimic the worst-case radiation patterns of 5G Sub-6 GHz UEs.Subsequently,the associated measurement uncertainty(MU)terms are quantitatively analyzed and determined based on statistical analysis.According to the comparison of calculated MUs,reduction of grid points from currentlyrequired 62(30/30,Δθ/Δϕ)to 26(45/45)could achieve roughly 60%test time reduction for Sub-6 GHz,while still maintaining an uncertainty level of≤0.25 dB.These values can be further reduced to 14(60/60)with 80%reduction for Sub-3 GHz.More importantly,the recommended grid configurations in this research are applicable to both TIS and TRP testing.展开更多
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(2024ZD0608100)the National Natural Science Foundation of China(62332017,U22A2022)
文摘In high-risk industrial environments like nuclear power plants,precise defect identification and localization are essential for maintaining production stability and safety.However,the complexity of such a harsh environment leads to significant variations in the shape and size of the defects.To address this challenge,we propose the multivariate time series segmentation network(MSSN),which adopts a multiscale convolutional network with multi-stage and depth-separable convolutions for efficient feature extraction through variable-length templates.To tackle the classification difficulty caused by structural signal variance,MSSN employs logarithmic normalization to adjust instance distributions.Furthermore,it integrates classification with smoothing loss functions to accurately identify defect segments amid similar structural and defect signal subsequences.Our algorithm evaluated on both the Mackey-Glass dataset and industrial dataset achieves over 95%localization and demonstrates the capture capability on the synthetic dataset.In a nuclear plant's heat transfer tube dataset,it captures 90%of defect instances with75%middle localization F1 score.
基金The National Natural Science Foundation of China(No.60175027).
文摘An evaluation approach for the response time probability distribution of workflows based on the fluid stochastic Petri net formalism is presented. Firstly, some problems about stochastic workflow net modeling are discussed. Then how to convert a stochastic workflow net model into a fluid stochastic Petri net model is described. The response time distribution can be obtained directly upon the transient state solution of the fluid stochastic Petri net model. In the proposed approach, there are not any restrictions on the structure of workflow models, and the processing times of workflow tasks can be modeled by using arbitrary probability distributions. Large workflow models can be efficiently tackled by recursively using a net reduction technique.
基金the Science and Technology Commission of Shanghai Municipality (Grant No.052912015)
文摘The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.
基金Project supported by the National Natural Science Foundation of China(Grant No.91750111)the National Key Research and Development Program of China(Grant No.2018YFB0504400)。
文摘To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.
基金Project supported by the National Natural Science Foundation of0 China (Nos. 60274011 and 60574067), and the Program for NewCentury Excellent Talents in University (No. NCET-04-0094), China
文摘The Fork-Join program consisting of K parallel tasks is a useful model for a large number of computing applications. When the parallel processor has multi-channels, later tasks may finish execution earlier than their earlier tasks and may join with tasks from other programs. This phenomenon is called exchangeable join (EJ), which introduces correlation to the task’s service time. In this work, we investigate the response time of multiprocessor systems with EJ with a new approach. We analyze two aspects of this kind of systems: exchangeable join (EJ) and the capacity constraint (CC). We prove that the system response time can be effectively reduced by EJ, while the reduced amount is constrained by the capacity of the multiprocessor. An upper bound model is constructed based on this analysis and a quick estimation algorithm is proposed. The approximation formula is verified by extensive simulation results, which show that the relative error of approximation is less than 5%.
基金supported by the Aviation Science Foundation of China
文摘The reliability of real-time embedded software directly determines the reliability of the whole real-time embedded sys- tem, and the effective software testing is an important way to ensure software quality and reliability. Based on the analysis of the characteristics of real-time embedded software, the formal method is introduced into the real-time embedded software testing field and the real-time extended finite state machine （RT-EFSM） model is studied firstly. Then, the time zone division method of real-time embedded system is presented and the definition and description methods of time-constrained transition equivalence class （timeCTEC） are presented. Furthermore, the approaches of the testing sequence and test case generation are put forward. Finally, the proposed method is applied to a typical avionics real- time embedded software testing practice and the examples of the timeCTEC, testing sequences and test cases are given. With the analysis of the testing result, the application verification shows that the proposed method can effectively describe the real-time embedded software state transition characteristics and real-time requirements and play the advantages of the formal methods in accuracy, effectiveness and the automation supporting. Combined with the testing platform, the real-time, closed loop and automated simulation testing for real-time embedded software can be realized effectively.
文摘In this paper, the response time of all-optical AND logic gate using the triangular photonic crystal lattice is investigated. The proposed logic gate consists of a photonic crystal nano-resonator formed by changing the size of the dielectric rods. The structure benefits the interference effect mechanism. The contrast ratio of the photonic crystal AND logic gate is obtained as 6 d B. In addition to simplicity, the designed nano-resonator increases the bit rate of logic gate. The delay time and footprint of logic gate are respectively 0.32 ps and 146 μm2. The proposed photonic crystal AND logic gate can operate at a bit rate of 3.12 Tbit/s。
文摘In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.
文摘Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.
基金the Defense Advanced research Projects Agency of the Department of Defense (No.15.3.2).
文摘This paper proposes a formal model of the automatic testing system for scheduling strategies in real-time UNIX and describes the algorithm of the key part of the system. The model of the system is an important technology of the automatization of software development. According to the model presented in the paper, many different kinds of automatic testing systems can be designed and developed easily. At the end of the paper, the prototype proves the feasibility of the model and design.
文摘The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.
基金State Key Laboratory of Hydroscience and Engineering Under Grant No.2008-TC-2National Natural Science Foundation of China Under Grant No.90510018,50779021 and 90715041
文摘It is well-recognized that a transfer system response delay that reduces the test stability inevitably exists in real-time dynamic hybrid testing （RTDHT）. This paper focuses on the delay-dependent stability and added damping of SDOF systems in RTDHT. The exponential delay term is transferred into a rational fraction by the Pad6 approximation, and the delay-dependent stability conditions and instability mechanism of SDOF RTDHT systems are investigated by the root locus technique. First, the stability conditions are discussed separately for the cases of stiffness, mass, and damping experimental substructure. The use of root locus plots shows that the added damping effect and instability mechanism for mass are different from those for stiffness. For the stiffness experimental substructure case, the instability results from the inherent mode because of an obvious negative damping effect of the delay. For the mass case, the delay introduces an equivalent positive damping into the inherent mode, and instability occurs at an added high frequency mode. Then, the compound stability condition is investigated for a general case and the results show that the mass ratio may have both upper and lower limits to remain stable. Finally, a high-emulational virtual shaking table model is built to validate the stability conclusions.
文摘CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.
基金National Natural Science Foundation under Grant Nos.51179093,91215301 and 41274106the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No.20130002110032Tsinghua University Initiative Scientific Research Program under Grant No.20131089285
文摘A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response analysis and signal generation tasks, and executed in two different target computers in real-time. One target computer implements the response analysis task, wherein a large time-step is used to solve the FE substructure, and another target computer implements the signal generation task, wherein an interpolation program is used to generate control signals in a small time-step to meet the input demand of the controller. By using this strategy, the scale of the FE numerical substructure simulation may be increased significantly. The proposed scheme is initially verified by two FE numerical substructure models with 98 and 1240 degrees of freedom （DOFs）. Thereafter, RTDHTs of a single frame-foundation structure are implemented where the foundation, considered as the numerical substructure, is simulated by the FE model with 1240 DOFs. Good agreements between the results of the RTDHT and those from the FE analysis in ABAQUS are obtained.
文摘BACKGROUND Rapid molecular testing has revolutionized the management of suspected viral meningitis and encephalitis by providing an etiological diagnosis in<90 min with potential to improve outcomes and shorten inpatient stays.However,use of molecular assays can vary widely.AIM To evaluate current practice for molecular testing of pediatric cerebrospinal fluid(CSF)samples across the United Kingdom using a structured questionnaire.METHODS A structured telephone questionnaire survey was conducted between July and August 2020.Data was collected on the availability of viral CSF nucleic acid amplification testing(NAAT),criteria used for testing and turnaround times including the impact of the coronavirus disease 2019 pandemic.RESULTS Of 196/212(92%)microbiology laboratories responded;63/196(32%)were excluded from final analysis as they had no on-site microbiology laboratory and outsourced their samples.Of 133 Laboratories included in the study,47/133(35%)had onsite facilities for viral CSF NAAT.Hospitals currently undertaking onsite NAAT(n=47)had much faster turnaround times with 39 centers(83%)providing results in≤24 h as compared to those referring samples to neighboring laboratories(5/86;6%).CONCLUSION Onsite/near-patient rapid NAAT(including polymerase chain reaction)is recommended wherever possible to optimize patient management in the acute setting.
文摘The paper intfoduces a PC-DSP based real-time digital simulator which is portable in size and aimed at the closed-loop testing of various types of protective relays for their design and application. The simulator can be widely used in not only concerning utilities but also manufacturers and research / certification institutes because of its many functions. The hardware architecture and software implementation of the simulator are described. The main features and functions of the simulator are also
文摘Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.
基金supported by the Key Research and Development Project of Zhejiang Province(Grant No.2023C01248,2023C01069)and the National Natural Science Foundation of China(Grant No.52375135,52305137).
文摘The reliability of the eddy current testing (ECT) in flaw detection is quantitatively evaluated by theprobability of detection (POD). Precise and efficient modeling of POD gives direction for the implement of ECTon sites to avoid false or missing flaw detection. Traditional POD analysis focuses on single uncertain factor orsingle response signal with limited credibility in engineering. This paper considers multiple response signals andmultiple flaw parameters to perform POD. The flaw length, the flaw depth, the coil impedance, and the magneticflux density are comprehensively studied under various lift-off distances. A finite element model (FEM) of ECT isestablished and verified with experiments to obtain sufficient simulation data for discrete POD modeling. Thecontinuous POD function is then fitted based on the discrete values to show the superiority of integrating multiplefactors. A comparison with conventional POD analysis further demonstrates the higher reliability of ECT flawdetection considering multiple flaw parameters and multiple response signals, especially for small flaws.
基金supported by the National Natural Science Foundation of China(No.61104182)
文摘Abstract Lognormal distribution is commonly used in engineering. It is also a life distribution of important research values. For long-life products follow this distribution, it is necessary to apply accelerated testing techniques to product demonstration. This paper describes the development of accelerated life testing sampling plans （ALSPs） for lognormal distribution under time-censoring conditions. ALSPs take both producer and consumer risks into account, and they can be designed to work whether acceleration factor （AF） is known or unknown. When AF is known, lift testing is assumed to be conducted under accelerated conditions with time-censoring. The producer and con- sumer risks are satisfied, and the size of test sample and the size of acceptance number arc opti- mized. Then sensitivity analyses are conducted. When AF is unknown, two or more predetermined levels of accelerated stress are used. The sample sizes and sample proportion allo- cated to each stress level are optimized. The acceptance constant that satisfies producer and consumer risk is obtdned by minimizing the generalized asymptotic variance of the test statistics. Finally, the properties of the two ALSPs （one for known-AF conditions and one for unknown AF conditions） are investigated to show that the proposed method is corrcct and usablc through numerical examples.
基金supported by the Beijing Natural Science Foundation under Grant L253002.
文摘With the rapid development and commercialization of wireless communications,the execution of OTA testing requires a tremendous amount of test time.Therefore,test time reduction is of great significance.The objective of this article is to determine optimal measurement grids for SISO OTA testing of 5G Sub-6 GHz user equipments(UEs)in anechoic chamber with satisfactory accuracy and efficiency.The effect of different grid configurations on OTA performance is analyzed quantitatively using reference radiation patterns at different bands.These patterns are utilized to mimic the worst-case radiation patterns of 5G Sub-6 GHz UEs.Subsequently,the associated measurement uncertainty(MU)terms are quantitatively analyzed and determined based on statistical analysis.According to the comparison of calculated MUs,reduction of grid points from currentlyrequired 62(30/30,Δθ/Δϕ)to 26(45/45)could achieve roughly 60%test time reduction for Sub-6 GHz,while still maintaining an uncertainty level of≤0.25 dB.These values can be further reduced to 14(60/60)with 80%reduction for Sub-3 GHz.More importantly,the recommended grid configurations in this research are applicable to both TIS and TRP testing.
