The antlions dig a conical simple pit in sand to catch ants.The funnel shape of the trap is deliberate with a critical angle of repose and is steep and shallow enough to trigger avalanches and cause struggling prey to...The antlions dig a conical simple pit in sand to catch ants.The funnel shape of the trap is deliberate with a critical angle of repose and is steep and shallow enough to trigger avalanches and cause struggling prey to fall into the funnel.The trap should be designed by optimizing pit morphology according to natural selection.In the current study,antlion behavior and pit morphology in the sand samples with different particle shapes and particle size distributions were studied.The small larvae build in fine sand and silty sand,while larger ones prefer fine to medium sands.However,there is no preference for sands with different particle shapes.Further,the static and dynamic angles of repose for the sand samples were measured,and the slope of the pits was compared with the repose angles.The angle of the heap slope oscillated between an upper angle or angle of sliding(the angle that triggers a landslide)and a lower angle named repose angle.展开更多
Heshan, a city in Southwest China, has been built over an old coal mining area. Due to low level of reclamation, coal gangue had been stacked in large heaps and caused geological environ- mental problems. To facilitat...Heshan, a city in Southwest China, has been built over an old coal mining area. Due to low level of reclamation, coal gangue had been stacked in large heaps and caused geological environ- mental problems. To facilitate designing management project of coal gangue, we made an investigation of the largest coal gangue heap in Dongkuang Mine of Heshan. Firstly, the grain composition of coal gangue was estimated through the sieving method, then the representative grading curve was drawn through the statistics method of coarse grain content, and lastly the relationship between the repose an- gle and grain grading was studied by piling up coal gangue with different mix proportion. The result indicates that there is a wider range of grain size in the upper part of coal gangue heap, and the repre- sentative grain grading is well graded and easy to be compacted as filling materials. Besides, the wavy relationship curve of repose angle and coarse grain content shows that the content of 70% is the infiec- tion point of ascent stage and 85% the inflection point of descent stage of the repose angle. What＇s more, the repose angle corresponding to the representative grading of coal gangue is approximately 38.4° and this has guiding significance for management project of coal gangue.展开更多
The repose angle is one of the most significant macroscopic parameters in describing the behavior of granular materials. Under a static condition, the repose angle is the steepest angle at which sediment particles can...The repose angle is one of the most significant macroscopic parameters in describing the behavior of granular materials. Under a static condition, the repose angle is the steepest angle at which sediment particles can rest without motion. In this paper, we use existing data and aeolian physics to analyze the main factors that influence the repose angle of sand dunes, and we investigate different repose angles involving various states and types of materials. We have determined that different factors have differential influence on the magnitude of the repose angle. Our results show that for powdery （〈400-μm diameter） desert sands, the main influential factor on the magnitude of repose angle is the molecular force among particles. Particle size does not influence the repose angle of desert sands directly, but has an indirect impact by affecting the grit sphericity and surface roughness, of which the grit sphericity acts as a major factor. Even at the same average particle size, the repose angle differs with different grain compositions. Furthermore, with increasing unevenness in grain composition, the repose angle increases correspondingly. Sand texture also has a direct influence on the repose angle of desert sands. In two sand samples having the same grain composition but different textures, the repose angles may be different. Water content has a stronger influence on the repose angle than any other factor. However, the relationship between the repose angle and water content is not a simple direct proportion. In fact, with increasing water content, the repose angle first increases and then decreases. These research results will be useful for understanding the mechanisms of dune transport, variations of dune morphology, and the stability and fluidity of dune sands.展开更多
The flowability of five kinds of microencapsulation powders,with differentβ-carotene contents and by two alternative particle-forming technologies i.e.spray-drying and starch-catching beadlet technology,was meas- ure...The flowability of five kinds of microencapsulation powders,with differentβ-carotene contents and by two alternative particle-forming technologies i.e.spray-drying and starch-catching beadlet technology,was meas- ured.The actual flow properties of the five powders were compared based on bin-flow test,and three flow indexes (Hausner ratio,repose angle and flow index)were measured.It was found that the repose angle is the most suitable index to reflect the flowability of these powders for the particle properties would not be altered due to compaction or tapping during the measuring process.Particle size and particle size distribution play most important roles in the flowability of these granular materials,which was also influenced by other factors like shape,surface texture,sur- face roughness,etc.Microcapsules with wall material of gelatin and a layer of modified starch absorbed on the sur- face showed excellent flowabilities and good mechanical properties,and they are favorable for tabletting to supply β-carotene.展开更多
Dambreak-induced bed scouring may undermine the foundation of bridge piers and other structures,and that destruction can pose a serious threat.Consequently,this paper aims at exploring the mechanisms of scouring and a...Dambreak-induced bed scouring may undermine the foundation of bridge piers and other structures,and that destruction can pose a serious threat.Consequently,this paper aims at exploring the mechanisms of scouring and armoring.Firstly,the incipient velocity for nonuniform sediment particles was studied,and a formula was derived based on the angle of repose of nonuniform sediment.The results showed that the mechanism of incipient motion for sand and fine gravel differed from that for coarse gravel and cobbles.Also,comparison between experimental and field data shows that the results from the proposed formula agree well with those observed for all conditions.Secondly,a birth-death,immigration-emigration Markov process was developed to describe the bed load transport rate associated with scouring and armoring.The comparison between experimental data and computed results shows that our model can predict the bed load transport rate,although there may be some limitations,the chief of which is that there are many variables in the model to be determined through experiment.This makes its application in river engineering inconvenient.展开更多
Since natural restoration combined with artificial auxiliary measures may achieve a relatively rapid restoration effect at a lower cost,it has become an essential measure for the ecological restoration of rock slopes....Since natural restoration combined with artificial auxiliary measures may achieve a relatively rapid restoration effect at a lower cost,it has become an essential measure for the ecological restoration of rock slopes.Previous studies have focused heavily on the relationship between substrate nutrients and water conditions and the development of mosses on the rock surface,but quantitative characterization of substantial effect of rock surface texture(e.g.,microrelief)on moss growth is absent.The undulating microrelief on the rock surface can increase the heterogeneity of the microhabitat,which may be an important factor affecting the development of mossdominated biocrusts.In this study,the roughness of rock surfaces,moss coverage and biomass,weight and major nutrient contents of soils within the biocrusts were measured in the western mountainous area of Sichuan Province,Southwest China to further examine the role of rock surface microrelief in the biocrusts.The results showed that three main factors affecting the development of the biocrusts were bryophyte emergence,soil accumulation,and lithology.The presence of moss accelerates soil formation on rock surfaces and lead to the accumulation of nutrients so that all parts of the moss-dominated biocrusts system can develop synergistically.It was found that a microrelief structure with a roughness between 1.5 and 2.5 could gather soil and bryophyte propagules effectively,which may have a strong relationship with the angle of repose.When the roughness is 1.5,the corresponding undulation angle is very close to the theoretical minimum value of the undulation angle calculated according to the relationships between the undulation angle of the protrusion,slope and angle of repose.展开更多
Sunflower(Helianthus annuus L.)is one of the four major oil crops in the world and has high economic value.However,the lack of discrete element method(DEM)models and parameters for sunflower seeds hinders the applicat...Sunflower(Helianthus annuus L.)is one of the four major oil crops in the world and has high economic value.However,the lack of discrete element method(DEM)models and parameters for sunflower seeds hinders the application of DEM for computer simulation in the key working processes of sunflower seed sowing and harvesting.The present study was conducted on two varieties of sunflower,and the DEM model of sunflower seeds was established by using 3D scanning technology based on the distribution of triaxial dimensions and volumes of the geometric model of sunflower seeds.Similarly,the physical characteristics parameters of sunflower seeds were determined by physical tests and the simulation parameters were screened for significance based on the Plackett-Burman test.Our results show that the coefficient of static friction between sunflower seeds and the coefficient of rolling friction have significant effects on the repose angle of the simulation test.Furthermore,the optimal range of the significance parameters was further determined by the steepest climb test,and the second-order regression model of the significance parameters and the repose angle was obtained according to the Box-Behnken design test and Response Surface Methodology(RSM),with the repose angle measured by the physical test as the optimized target value to obtain the optimal parameter combination.Finally,a two-sample t-test for the repose angle of the physical test and the repose angle of the simulation test yielded P>0.05.Our results confirms that the repose angle obtained from simulation is not significantly different from the physical test value,and the relative errors between the repose angle of the simulation test and the physical test are 1.43%and 0.40%,respectively,for the optimal combination of parameters.Based on these results it can be concluded that the optimal parameters obtained from the calibration can be used for DEM simulation experiments related to the sunflower seed sowing and harvesting process.展开更多
[Objectives]To optimize the drying technology and formation process of Naomai Xingshen Capsules.[Methods]The yield of paste powder and moisture content as evaluation indicators were taken as indicators,the relative de...[Objectives]To optimize the drying technology and formation process of Naomai Xingshen Capsules.[Methods]The yield of paste powder and moisture content as evaluation indicators were taken as indicators,the relative density of feed liquid,inlet air temperature and dosage of excipients were selected as investigation factors,the orthogonal experiment method was used to optimize the spray drying process.The moisture absorption rate and angle of repose were taken as evaluation indicators,the types of forming excipient were screened,and the critical relative humidity was determined.[Results]The optimum spray drying process was that the relative density of liquid medicine was 1.05(60℃),the air inlet temperature was 200℃,and the dosage of excipients was 2%.The effect of using dextrin as a forming excipient was better,and the relative humidity of the production environment should be controlled below 65%.[Conclusions]The optimized process is stable,feasible,scientific and reasonable,and can be used for large-scale industrial production.展开更多
Shape has an undeniable impact on particle behaviour,and the shapes of naturally occurring granular matter are typically irregular.Computational studies of irregularly shaped particles are challenging but necessary to...Shape has an undeniable impact on particle behaviour,and the shapes of naturally occurring granular matter are typically irregular.Computational studies of irregularly shaped particles are challenging but necessary to gain a better understanding of the flow of particulate matter.This study focuses on the behaviour of irregular sinter particles and applies the discrete element method to examine the effects of static and rolling friction coefficients and particle shape on the angle of repose and porosity of sinter piles.A three-dimensional model of an irregular sinter particle reconstructed by close-range photogrammetry served as the template for generating multi-sphere particles with varying numbers of sub-spheres(1,3,7,22,and 135)and sphericity ranging from 1 to 0.69.Simulations of particle piles were conducted for a range of values of the coefficients of static and rolling friction.The results indicate that the angle of repose increases with static friction and also increases with rolling friction coefficient when it is lower than the static coefficient.The angle of repose shows clear dependence on particle shape,particularly for lower rolling friction coefficients.The friction coefficients for particles of five different shapes were individually determined through bulk calibration,and irregularly shaped particles in DEM were found to require lower friction coefficients.Porosity was marginally affected by the static and rolling friction coefficients for spherical particles,while non-spherical particles showed porosity increasing with the rolling friction coefficient.The relationship between particle sphericity and porosity was nonlinear:as sphericity decreases from 1.00 to 0.69,the porosity first decreases to a minimum and then increases.The findings confirmed that both friction and particle shape have a significant influence on the structure of sinter piles,with implications for material handling and processing in industrial applications.展开更多
The numerical effort of discrete element method (DEM) simulations results in a general idealisation of DEM models that makes the calibration crucial to obtaining realistic simulation results. The angle of repose test ...The numerical effort of discrete element method (DEM) simulations results in a general idealisation of DEM models that makes the calibration crucial to obtaining realistic simulation results. The angle of repose test has become a standard test for the calibration of DEM parameters of cohesionless bulk materials and is extensively discussed in the literature. One of the most used test methods is the pull-up test of a hollow cylinder filled with bulk material. This paper presents how this basic pull-up test can also be used for the calibration of DEM parameters of cohesive materials by changing the analysis criteria. In contrast to analysing the static angle of repose, the focus lies on the macroscopic flow behaviour during the lifting of the cylinder. Reproducible phases of flow are identified in experiments: the build-up of a stable bulk material column, the convex bending of the column, and the beginning of collapse of the column. Furthermore, the phases are independent of the size and lifting velocity. The convex bending of the bulk-material column combined with the moment of first collapse are introduced as new measurable calibration criteria. These experimental results of wet sand are used for the calibration of related DEM parameters using a simplified JKR cohesion model. The DEM calibration including an analysis algorithm that fits the experimental flow behaviour and the final selection of the relevant parameters (i.e., sliding friction coefficient, rolling friction coefficient, and cohesion energy density) is presented in detail.展开更多
文摘The antlions dig a conical simple pit in sand to catch ants.The funnel shape of the trap is deliberate with a critical angle of repose and is steep and shallow enough to trigger avalanches and cause struggling prey to fall into the funnel.The trap should be designed by optimizing pit morphology according to natural selection.In the current study,antlion behavior and pit morphology in the sand samples with different particle shapes and particle size distributions were studied.The small larvae build in fine sand and silty sand,while larger ones prefer fine to medium sands.However,there is no preference for sands with different particle shapes.Further,the static and dynamic angles of repose for the sand samples were measured,and the slope of the pits was compared with the repose angles.The angle of the heap slope oscillated between an upper angle or angle of sliding(the angle that triggers a landslide)and a lower angle named repose angle.
文摘Heshan, a city in Southwest China, has been built over an old coal mining area. Due to low level of reclamation, coal gangue had been stacked in large heaps and caused geological environ- mental problems. To facilitate designing management project of coal gangue, we made an investigation of the largest coal gangue heap in Dongkuang Mine of Heshan. Firstly, the grain composition of coal gangue was estimated through the sieving method, then the representative grading curve was drawn through the statistics method of coarse grain content, and lastly the relationship between the repose an- gle and grain grading was studied by piling up coal gangue with different mix proportion. The result indicates that there is a wider range of grain size in the upper part of coal gangue heap, and the repre- sentative grain grading is well graded and easy to be compacted as filling materials. Besides, the wavy relationship curve of repose angle and coarse grain content shows that the content of 70% is the infiec- tion point of ascent stage and 85% the inflection point of descent stage of the repose angle. What＇s more, the repose angle corresponding to the representative grading of coal gangue is approximately 38.4° and this has guiding significance for management project of coal gangue.
基金supported by the National Natural Science Foundation of China (Grant No. 50879033)the National Science Fund for Fostering Talents in Basic Research of the National Natural Science Foundation of China (Grant No.J0730536)
文摘The repose angle is one of the most significant macroscopic parameters in describing the behavior of granular materials. Under a static condition, the repose angle is the steepest angle at which sediment particles can rest without motion. In this paper, we use existing data and aeolian physics to analyze the main factors that influence the repose angle of sand dunes, and we investigate different repose angles involving various states and types of materials. We have determined that different factors have differential influence on the magnitude of the repose angle. Our results show that for powdery （〈400-μm diameter） desert sands, the main influential factor on the magnitude of repose angle is the molecular force among particles. Particle size does not influence the repose angle of desert sands directly, but has an indirect impact by affecting the grit sphericity and surface roughness, of which the grit sphericity acts as a major factor. Even at the same average particle size, the repose angle differs with different grain compositions. Furthermore, with increasing unevenness in grain composition, the repose angle increases correspondingly. Sand texture also has a direct influence on the repose angle of desert sands. In two sand samples having the same grain composition but different textures, the repose angles may be different. Water content has a stronger influence on the repose angle than any other factor. However, the relationship between the repose angle and water content is not a simple direct proportion. In fact, with increasing water content, the repose angle first increases and then decreases. These research results will be useful for understanding the mechanisms of dune transport, variations of dune morphology, and the stability and fluidity of dune sands.
基金Supported by the National-Natural Science Foundation of China （No.20576118） and National High Technology Research and Development Program of China （863 Program, No.2006AA02Z210）.
文摘The flowability of five kinds of microencapsulation powders,with differentβ-carotene contents and by two alternative particle-forming technologies i.e.spray-drying and starch-catching beadlet technology,was meas- ured.The actual flow properties of the five powders were compared based on bin-flow test,and three flow indexes (Hausner ratio,repose angle and flow index)were measured.It was found that the repose angle is the most suitable index to reflect the flowability of these powders for the particle properties would not be altered due to compaction or tapping during the measuring process.Particle size and particle size distribution play most important roles in the flowability of these granular materials,which was also influenced by other factors like shape,surface texture,sur- face roughness,etc.Microcapsules with wall material of gelatin and a layer of modified starch absorbed on the sur- face showed excellent flowabilities and good mechanical properties,and they are favorable for tabletting to supply β-carotene.
基金supported by 973 Program (2008CB425803)the National Natural Science Foundation of China (Grant No. 50979064)
文摘Dambreak-induced bed scouring may undermine the foundation of bridge piers and other structures,and that destruction can pose a serious threat.Consequently,this paper aims at exploring the mechanisms of scouring and armoring.Firstly,the incipient velocity for nonuniform sediment particles was studied,and a formula was derived based on the angle of repose of nonuniform sediment.The results showed that the mechanism of incipient motion for sand and fine gravel differed from that for coarse gravel and cobbles.Also,comparison between experimental and field data shows that the results from the proposed formula agree well with those observed for all conditions.Secondly,a birth-death,immigration-emigration Markov process was developed to describe the bed load transport rate associated with scouring and armoring.The comparison between experimental data and computed results shows that our model can predict the bed load transport rate,although there may be some limitations,the chief of which is that there are many variables in the model to be determined through experiment.This makes its application in river engineering inconvenient.
基金supported by the Project of Assessment on Post-quake Ecosystem and Environment Recovery in Jiuzhaigou under Grant 5132202020000046the National Key Research and Development Programme of China under Grant 2017YFC0504902。
文摘Since natural restoration combined with artificial auxiliary measures may achieve a relatively rapid restoration effect at a lower cost,it has become an essential measure for the ecological restoration of rock slopes.Previous studies have focused heavily on the relationship between substrate nutrients and water conditions and the development of mosses on the rock surface,but quantitative characterization of substantial effect of rock surface texture(e.g.,microrelief)on moss growth is absent.The undulating microrelief on the rock surface can increase the heterogeneity of the microhabitat,which may be an important factor affecting the development of mossdominated biocrusts.In this study,the roughness of rock surfaces,moss coverage and biomass,weight and major nutrient contents of soils within the biocrusts were measured in the western mountainous area of Sichuan Province,Southwest China to further examine the role of rock surface microrelief in the biocrusts.The results showed that three main factors affecting the development of the biocrusts were bryophyte emergence,soil accumulation,and lithology.The presence of moss accelerates soil formation on rock surfaces and lead to the accumulation of nutrients so that all parts of the moss-dominated biocrusts system can develop synergistically.It was found that a microrelief structure with a roughness between 1.5 and 2.5 could gather soil and bryophyte propagules effectively,which may have a strong relationship with the angle of repose.When the roughness is 1.5,the corresponding undulation angle is very close to the theoretical minimum value of the undulation angle calculated according to the relationships between the undulation angle of the protrusion,slope and angle of repose.
基金funding for this study from Nature Science Foundation of China,Grant No.(51865047).
文摘Sunflower(Helianthus annuus L.)is one of the four major oil crops in the world and has high economic value.However,the lack of discrete element method(DEM)models and parameters for sunflower seeds hinders the application of DEM for computer simulation in the key working processes of sunflower seed sowing and harvesting.The present study was conducted on two varieties of sunflower,and the DEM model of sunflower seeds was established by using 3D scanning technology based on the distribution of triaxial dimensions and volumes of the geometric model of sunflower seeds.Similarly,the physical characteristics parameters of sunflower seeds were determined by physical tests and the simulation parameters were screened for significance based on the Plackett-Burman test.Our results show that the coefficient of static friction between sunflower seeds and the coefficient of rolling friction have significant effects on the repose angle of the simulation test.Furthermore,the optimal range of the significance parameters was further determined by the steepest climb test,and the second-order regression model of the significance parameters and the repose angle was obtained according to the Box-Behnken design test and Response Surface Methodology(RSM),with the repose angle measured by the physical test as the optimized target value to obtain the optimal parameter combination.Finally,a two-sample t-test for the repose angle of the physical test and the repose angle of the simulation test yielded P>0.05.Our results confirms that the repose angle obtained from simulation is not significantly different from the physical test value,and the relative errors between the repose angle of the simulation test and the physical test are 1.43%and 0.40%,respectively,for the optimal combination of parameters.Based on these results it can be concluded that the optimal parameters obtained from the calibration can be used for DEM simulation experiments related to the sunflower seed sowing and harvesting process.
基金Medical Research Project of Zhongshan City Health and Family Planning Bureau,Guangdong Province(2015J050).
文摘[Objectives]To optimize the drying technology and formation process of Naomai Xingshen Capsules.[Methods]The yield of paste powder and moisture content as evaluation indicators were taken as indicators,the relative density of feed liquid,inlet air temperature and dosage of excipients were selected as investigation factors,the orthogonal experiment method was used to optimize the spray drying process.The moisture absorption rate and angle of repose were taken as evaluation indicators,the types of forming excipient were screened,and the critical relative humidity was determined.[Results]The optimum spray drying process was that the relative density of liquid medicine was 1.05(60℃),the air inlet temperature was 200℃,and the dosage of excipients was 2%.The effect of using dextrin as a forming excipient was better,and the relative humidity of the production environment should be controlled below 65%.[Conclusions]The optimized process is stable,feasible,scientific and reasonable,and can be used for large-scale industrial production.
基金funded by China Scholarship Council(grant No.202106890009).
文摘Shape has an undeniable impact on particle behaviour,and the shapes of naturally occurring granular matter are typically irregular.Computational studies of irregularly shaped particles are challenging but necessary to gain a better understanding of the flow of particulate matter.This study focuses on the behaviour of irregular sinter particles and applies the discrete element method to examine the effects of static and rolling friction coefficients and particle shape on the angle of repose and porosity of sinter piles.A three-dimensional model of an irregular sinter particle reconstructed by close-range photogrammetry served as the template for generating multi-sphere particles with varying numbers of sub-spheres(1,3,7,22,and 135)and sphericity ranging from 1 to 0.69.Simulations of particle piles were conducted for a range of values of the coefficients of static and rolling friction.The results indicate that the angle of repose increases with static friction and also increases with rolling friction coefficient when it is lower than the static coefficient.The angle of repose shows clear dependence on particle shape,particularly for lower rolling friction coefficients.The friction coefficients for particles of five different shapes were individually determined through bulk calibration,and irregularly shaped particles in DEM were found to require lower friction coefficients.Porosity was marginally affected by the static and rolling friction coefficients for spherical particles,while non-spherical particles showed porosity increasing with the rolling friction coefficient.The relationship between particle sphericity and porosity was nonlinear:as sphericity decreases from 1.00 to 0.69,the porosity first decreases to a minimum and then increases.The findings confirmed that both friction and particle shape have a significant influence on the structure of sinter piles,with implications for material handling and processing in industrial applications.
文摘The numerical effort of discrete element method (DEM) simulations results in a general idealisation of DEM models that makes the calibration crucial to obtaining realistic simulation results. The angle of repose test has become a standard test for the calibration of DEM parameters of cohesionless bulk materials and is extensively discussed in the literature. One of the most used test methods is the pull-up test of a hollow cylinder filled with bulk material. This paper presents how this basic pull-up test can also be used for the calibration of DEM parameters of cohesive materials by changing the analysis criteria. In contrast to analysing the static angle of repose, the focus lies on the macroscopic flow behaviour during the lifting of the cylinder. Reproducible phases of flow are identified in experiments: the build-up of a stable bulk material column, the convex bending of the column, and the beginning of collapse of the column. Furthermore, the phases are independent of the size and lifting velocity. The convex bending of the bulk-material column combined with the moment of first collapse are introduced as new measurable calibration criteria. These experimental results of wet sand are used for the calibration of related DEM parameters using a simplified JKR cohesion model. The DEM calibration including an analysis algorithm that fits the experimental flow behaviour and the final selection of the relevant parameters (i.e., sliding friction coefficient, rolling friction coefficient, and cohesion energy density) is presented in detail.
