Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Fa...Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.展开更多
The discharge of micro-polluted water from sources such as agricultural runoff,urban stormwater,and treated effluents presents significant challenges to aquatic ecosystems.Constructed wetlands(CWs)have gained recog-ni...The discharge of micro-polluted water from sources such as agricultural runoff,urban stormwater,and treated effluents presents significant challenges to aquatic ecosystems.Constructed wetlands(CWs)have gained recog-nition as an eco-friendly solution for removing pollutants from various wastewater sources and are increasingly applied for micro-polluted water treatment.By reviewing 78 full-scale CW studies from Web of Science,it is summarized that the ranges of ammonium nitrogen(NH4+-N)concentrations in runoff,wastewater treatment plant effluent and polluted river were 0.1–6.6,0.3–12.3,and 0.2–41.1 mg/L,respectively.The ranges of ni-trate nitrogen concentrations were 0.2–14.2,0–5.7,and 0–2.6 mg/L,respectively.Removal efficiencies of CWs for micro-polluted water varied by CW types.The total nitrogen removal efficiencies for subsurface-flow CWs,free-water surface-flow CWs,and hybrid CWs ranged from 27.4%to 66.5%,16.8%to 89.8%,and 19.4%to 88.2%,respectively.The NH4+-N removal efficiencies ranged from 34.2%to 73.6%,38.4%to 89.4%and 13.5%to 94.2%,respectively.Additionally,other factors influencing contaminant removal efficiency such as hydraulic retention time,vegetation types,redox micro-environment and influent water quality were evaluated.Based on these findings,two strategies for improving the purification performance of CWs were proposed:the selection of incorporating electron donor substrates and the optimization of operation parameters.This paper serves as a synthesis of information to guide future research and full-scale CW applications in micro-polluted water treatment.展开更多
Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between ...Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.展开更多
The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly comple...The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.展开更多
OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which...OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.展开更多
Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess...Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.展开更多
Microplastics(MPs),as a new category of environmental pollutant,have been the hotspot of eco-friendly issues nowadays.Studies based on the aging process,the migration pattern of MPs in runoff rainwater,and the use of ...Microplastics(MPs),as a new category of environmental pollutant,have been the hotspot of eco-friendly issues nowadays.Studies based on the aging process,the migration pattern of MPs in runoff rainwater,and the use of bioretention cells to remove MPs from runoff rainwater are beginning to attract widespread attention.This review analyses the migration patterns of MPs in rainwater runoff through their sources,structure and characteristics.The mechanism of removing MPs from runoff stormwater,the purification efficiency of different fillers and their influencing factors,and the accumulation,fate,and aging of MPs in bioretention cells are described.Furthermore,the hazards of MP accumulation on the performance of bioretention cells are summarised.Future directions for removing MPs in bioretention cells are proposed:(1)research on MPs smaller than 100μm;(2)influence of MPs aging process on bioretention cells;(3)exploration of more effective fillers to enhance their removal efficiency;(4)research on synergistic removal mechanism of MPs and other pollution.展开更多
Several studies have demonstrated that reintroducing crop straw to fields may intensify cadmium(Cd)contamination in agricultural soils.However,the specific effects of long-term straw management practices on Cd concent...Several studies have demonstrated that reintroducing crop straw to fields may intensify cadmium(Cd)contamination in agricultural soils.However,the specific effects of long-term straw management practices on Cd concentration and its bioavailability in soil-rice ecosystems remain unclear.In this context,to explore the influence of straw return(SR)and straw removal(NSR)on Cd accumulation in both soil and rice within a double-cropping system,we conducted a four-year field study.Our research study unveiled that NSR consistently decreased soil Cd concentration and its bioavailability by approximately 16.93%–27.30%and 8.23%–21.05%respectively across both study sites.Conversely,SR resulted in a substantial increase in soil Cd bioavailability,ranging from 38.64%–53.95%.Notably,compared to NSR,SR significantly increased total soil Cd by 5.47%–36.58%and increased Cd content in brown rice by 8.00%–100.24%.Remarkably,after four consecutive years of NSR,brown rice Cd concentration at the Changfeng site compiled with national safety standards(GB 2762–2022).Additionally,returning early rice strawsignificantly raised soil Cd bioavailability for the subsequent crop,more so than late rice straw did for the early rice the following year.The findings suggest that traditional double-cropping cultivation with straw removal can effectively mitigate Cd contamination risks in crops and farmland in Hunan Province.展开更多
To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with...To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.展开更多
Current research primarily focuses on emerging organic pollutants,with limited attention to emerging inorganic pollutants (EIPs).However,due to advances in detection technology and the escalating environmental and hea...Current research primarily focuses on emerging organic pollutants,with limited attention to emerging inorganic pollutants (EIPs).However,due to advances in detection technology and the escalating environmental and health challenges posed by pollution,there is a growing interest in treating waters contaminated with EIPs.This paper explores biochar characteristics and modification methods,encompassing physical,chemical,and biological approaches for adsorbing EIPs.It offers a comprehensive review of research advancements in employing biochar for EIPs remediation in water,outlines the adsorption mechanisms of EIPs by biochar,and presents an environmental and economic analysis.It can be concluded that using biochar for the adsorption of EIPs in wastewater exhibits promising potential.Nonetheless,it is noteworthy that certain EIPs like Au(III),Rh(III),Ir(III),Ru(III),Os(III),Sc(III),and Y(III),have not been extensively investigated regarding their adsorption onto biochar.This comprehensive review will catalyze further inquiry into the biochar-based adsorption of EIPs,addressing current research deficiencies and advancing the practical implementation of biochar as a potent substrate for EIP removal from wastewater streams.展开更多
The goethite residue generated from zinc hydrometallurgy is classified as hazardous solid waste,produced in large quantities,and results in significant zinc loss.The study was conducted on removing iron from FeSO_(4)-...The goethite residue generated from zinc hydrometallurgy is classified as hazardous solid waste,produced in large quantities,and results in significant zinc loss.The study was conducted on removing iron from FeSO_(4)-ZnSO_(4) solution,employing seed-induced nucleation methods.Analysis of the iron removal rate,residue structure,morphology,and elemental composition involved ICP,XRD,FT-IR,and SEM.The existing state of zinc was investigated by combining step-by-step dissolution using hydrochloric acid.Concurrently,iron removal tests were extended to industrial solutions to assess the influence of seeds and solution pH on zinc loss and residue yield.The results revealed that seed addition increased the iron removal rate by 3%,elevated the residual iron content by 6.39%,and mitigated zinc loss by 29.55%in the simulated solution.Seed-induced nucleation prevented excessive nuclei formation,fostering crystal stable growth and high crystallinity.In addition,the zinc content of surface adsorption and crystal internal embedding in the residue was determined,and the zinc distribution on the surface was dense.In contrast,the total amount of zinc within the crystal was higher.The test results in the industrial solution demonstrated that the introduction of seeds expanded the pH range for goethite formation and growth,and the zinc loss per ton of iron removed was reduced by 50.91 kg(34.12%)and the iron residue reduced by 0.17 t(8.72%).展开更多
Wigner-Ville distribution(WVD)is widely used in the field of signal processing due to its excellent time-frequency(TF)concentration.However,WVD is severely limited by the cross-term when working with multicomponent si...Wigner-Ville distribution(WVD)is widely used in the field of signal processing due to its excellent time-frequency(TF)concentration.However,WVD is severely limited by the cross-term when working with multicomponent signals.In this paper,we analyze the property differences between auto-term and cross-term in the one-dimensional sequence and the two-dimensional plane and approximate entropy and Rényi entropy are employed to describe them,respectively.Based on this information,we propose a new method to achieve adaptive cross-term removal by combining seeded region growing.Compared to other methods,the new method can achieve cross-term removal without decreasing the TF concentration of the auto-term.Simulation and experimental data processing results show that the method is adaptive and is not constrained by the type or distribution of signals.And it performs well in low signal-to-noise ratio environments.展开更多
Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machin...Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machining.Noxious slurries are widely used in conventional chemical mechanical polishing(CMP),resulting in the possible pollution to the environment.Moreover,the traditional slurries normally contain more than four ingredients,causing difficulties to control the process and quality of CMP.To solve these challenges,a novel green CMP for single crystal diamond was developed,consisting of only hydrogen peroxide,diamond abrasive and Prussian blue(PB)/titania catalyst.After CMP,atomic surface is achieved with surface roughness Sa of 0.079 nm,and the MRR is 1168 nm·h^(-1).Thickness of damaged layer is merely 0.66 nm confirmed by transmission electron microscopy(TEM).X-ray photoelectron spectroscopy,electron paramagnetic resonance and TEM reveal that·OH radicals form under ultraviolet irradiation on PB/titania catalyst.The·OH radicals oxidize diamond,transforming it from monocrystalline to amorphous atomic structure,generating a soft amorphous layer.This contributes the high MRR and formation of atomic surface on diamond.The developed novel green CMP offers new insights to achieve atomic surface of diamond for potential use in their high-performance devices.展开更多
The removal of harmful cyanobacterial blooms(HCBs)and reuse of the resulting algal sludge are pressing issues in current environmental governance and ecological conservation.Aiming at tackling the abovementioned chall...The removal of harmful cyanobacterial blooms(HCBs)and reuse of the resulting algal sludge are pressing issues in current environmental governance and ecological conservation.Aiming at tackling the abovementioned challenges,titanium(Ti)-based coagulants are promising candidates.However,most of them suffer from poor stability and weak actual algal removal ability,and recycling of the algal sludge usually produces titanium dioxide(TiO_(2))with low photocatalytic ability.In this work,a lanthanum(La)-modified polytitanium chloride(La-PTC)coagulant is reported.La in the La-PTC coagulant serves a"kill two birds with one stone"strategy in algae removal and algae sludge reuse.Owing to the introduction of La ions,the La-PTC coagulant exhibits ultra-high stability and excellent algae removal capability with an efficiency of 98.71%,which is 7.25%higher than that of PTC coagulant.Moreover,recycling algae sludge can prepare high catalytic(2.45 times the commercial P25 TiO_(2))La/C-TiO_(2),where the presence of La enhances its visible light response range and inhibits electron hole recombination.The strategy of this La modified coagulant can not only achieve efficient re moval of HCBs,but also transfo rm the recovered algal sludge into photocatalysts with higher catalytic capacity.展开更多
The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most po...The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most popular method for overcoming the above inadequacies.In this work,a CdZnS/TiO_(2) membrane photocatalyst with adjustable suspended depth(include floating)and flexible assembly is designed,which is less prone to dislodgement due to in situ synthesis and has a wider range of applicability than previously reported photocatalysts.The photocatalytic removal of Microcystis aeruginosa revealed that the suspended depth and distribution format of the CdZnS/TiO_(2) membrane photocatalysts have striking effects on the photocatalytic removal performance of Microcystis aeruginosa,the photocatalytic removal efficiency of CdZnS/TiO_(2)-2 membrane photocatalysts for Microcystis aeruginosa could reach to 98.6%in 60 min when the photocatalysts assembled in the form of 3×3 arrays suspended at a depth of 2 cm from the liquid surface.A tiny amount of TiO_(2) loading allows the formation of Z-Scheme heterojunction,resulting in accelerating the separation efficiency of photogenerated carriers,preserving the photogenerated electrons and holes with stronger reduction and oxidation ability and inhabiting the photo-corrosion of CdZnS.展开更多
Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated wi...Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.展开更多
Copper is a strategic metal that plays an important role in many industries.In copper metallurgy,electrolytic refining is essential to obtain high-purity copper.However,during the electrolytic refining process,impurit...Copper is a strategic metal that plays an important role in many industries.In copper metallurgy,electrolytic refining is essential to obtain high-purity copper.However,during the electrolytic refining process,impurities such as arsenic are introduced into the electrolyte,which significantly affect the subsequent production and quality of copper products.This paper first discusses the sources,forms,and transformation pathways of arsenic in copper electrolyte during the electrolytic process,then reviews various arsenic removal technologies in detail,including electrowinning,adsorption,solvent extraction,ion exchange,membrane filtration,and precipitation.Particular emphasis is placed on electrowinning,which is the most widely used and mature among these arsenic removal techniques.The paper evaluates these methods based on arsenic removal efficiency,cost effectiveness,technical maturity,environmental friendliness,and operation simplicity.In addition,the paper explores future trends in copper electrolyte purification,focusing on waste reduction at source,resource utilization,intelligent digitalization,and innovations in materials and processes.This review aims to provide researchers and practitioners with a comprehensive and in-depth reference on arsenic removal methods in copper electrolytes.展开更多
Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a kno...Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a knowledge mapping was generated based on published studies to investigate the characteristics of bibliometric studies on acupuncture and the extent of duplicate publications,with the overarching goal of providing a comprehensive overview of the knowledge structure in this field.Methods:This cross-sectional study used three databases(PubMed,Web of Science,and Scopus)to identify relevant studies up to May 1,2024.In addition,the reference lists were retrieved as a supplement.To track research trends,we employed Microsoft Excel and R software to extract,code,and analyze information.Study selection,data extraction,and validation were performed independently by at least two reviewers.The reporting quality of included studies was assessed using the Preliminary guideline for reporting bibliometric reviews of the biomedical literature(BIBLIO).Results:Among the 6,221 bibliometric reviews examined,113 relevant publications were identified,80 focusing on various diseases/conditions.The annual number of publications has gradually increased,with the output in the past four years being 3.52 times higher than that before 2020.China(106)and Chengdu University of Traditional Chinese Medicine(16)have the highest number of publications.The most prolific author is Fan-Rong Liang,with six articles.The first bibliometric study,by Hai-Yan Li,was published in 2010.Journal of Pain Research,with 36 articles,holds the most publications.The top three diseases:diseases of the nervous system;symptoms,signs,or clinical findings not elsewhere classified;and mental,behavioral,or neurodevelopmental disorders.There may be potential duplication in research on 13 diseases/conditions,notably stroke,migraine,pain/analgesia,cancer pain,shoulder pain,facial paralysis/bell’s palsy,chronic pain,and cognitive impairment.In BIBLIO,the most frequently missing items are issues/topics(item 2),quality assessment(item 11),and descriptive findings(item 13).Conclusion:This study demonstrates that acupuncture bibliometrics is actively utilized to identify dominant diseases/conditions,aiding scholars in understand the knowledge structure and main topics.Although the number of related studies is increasing,with an average of 25 studies annually,overlap in some areas highlights the need for adherence to reporting guidelines and careful topic selection to ensure truly valuable insights and knowledge contributions.The adherence to BIBLIO’s 20 proposed items across analyzed articles,highlighting important in reporting practices.展开更多
Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods...Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods:A total of 217 young breast cancer patients were enrolled from a tertiary Grade A oncology hospital in Tianjin,China,using the convenience sampling method.All participants completed the general questionnaire,Ambivalence over Emotion Expression Questionnaire(AEQ),and Family Adapt-Ability and Cohesion Evaluation Scales-Chinese Version(FACES-CV).We employed exploratory latent profileanalysis for ambivalence over emotional expression profilingand logistic regression analysis to identify the influentialfactors Results:The results of the latent profileanalysis supported the models of four latent profiles,which were definedas“low conflict-lowexpression reflection”(19.2%),“high conflict-high inhibition expression”(43.9%),“moderate conflict-highregret expression”(18.1%),and“moderate conflict-desire understand”(18.8%).Logistic regression revealed that family cohesion,marital status,residence,per capita monthly income,and cancer stage were the influencingfactors of ambivalence over emotional expression in young breast cancer patients(P<0.05)Conclusions:Levels of ambivalence over emotional expression ameast cancer patients with breast cancer were highly heterogeneous.Medical staff should provide psychological counseling and health education tailored to the unique characteristics of emotional expression ambivalence in different patient groups to promote healthy emotional expression among patients.展开更多
基金supported by the National Natural Science Foundation of China(82341245,82371491)the Chinese Central Government(Key Project of Public Health Program)the National Key Research and Development Program of China(2018YFC1311706,2018YFC1311702)。
文摘Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.
基金supported by the Natural Science Foundation of China(No.52470105)the Young Taishan Scholars Program of Shandong Province(No.358202103017).
文摘The discharge of micro-polluted water from sources such as agricultural runoff,urban stormwater,and treated effluents presents significant challenges to aquatic ecosystems.Constructed wetlands(CWs)have gained recog-nition as an eco-friendly solution for removing pollutants from various wastewater sources and are increasingly applied for micro-polluted water treatment.By reviewing 78 full-scale CW studies from Web of Science,it is summarized that the ranges of ammonium nitrogen(NH4+-N)concentrations in runoff,wastewater treatment plant effluent and polluted river were 0.1–6.6,0.3–12.3,and 0.2–41.1 mg/L,respectively.The ranges of ni-trate nitrogen concentrations were 0.2–14.2,0–5.7,and 0–2.6 mg/L,respectively.Removal efficiencies of CWs for micro-polluted water varied by CW types.The total nitrogen removal efficiencies for subsurface-flow CWs,free-water surface-flow CWs,and hybrid CWs ranged from 27.4%to 66.5%,16.8%to 89.8%,and 19.4%to 88.2%,respectively.The NH4+-N removal efficiencies ranged from 34.2%to 73.6%,38.4%to 89.4%and 13.5%to 94.2%,respectively.Additionally,other factors influencing contaminant removal efficiency such as hydraulic retention time,vegetation types,redox micro-environment and influent water quality were evaluated.Based on these findings,two strategies for improving the purification performance of CWs were proposed:the selection of incorporating electron donor substrates and the optimization of operation parameters.This paper serves as a synthesis of information to guide future research and full-scale CW applications in micro-polluted water treatment.
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
文摘Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.
基金financially supported by Guangdong Province Basic and Applied Basic Research Fund Project(Grant No.2022B1515250009)Liaoning Provincial Natural Science Foundation-Doctoral Research Start-up Fund Project(Grant No.2024-BSBA-05)+1 种基金Major Science and Technology Innovation Project in Shandong Province(Grant No.2024CXGC010803)the National Natural Science Foundation of China(Grant Nos.52271269 and 12302147).
文摘The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.
基金National Nonprofit Institute Research Grant for the Institute of Basic Theory for Chinese Medicine,China Academy of Chinese Medical Sciences:Mechanism of Regulating Phlegm-Dampness Constitution to Prevent Metabolic Diseases based on Gut Microbiota-host DNA Methylation(No.YZ-202151)。
文摘OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.
基金supported by an Innovation Fund for Medical Sciences of the Chinese Academy of Medical Sciences (Grant No.2019-I2M-2-007).
文摘Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.
基金supported by the National Natural Science Foundation of China(No.52070152).
文摘Microplastics(MPs),as a new category of environmental pollutant,have been the hotspot of eco-friendly issues nowadays.Studies based on the aging process,the migration pattern of MPs in runoff rainwater,and the use of bioretention cells to remove MPs from runoff rainwater are beginning to attract widespread attention.This review analyses the migration patterns of MPs in rainwater runoff through their sources,structure and characteristics.The mechanism of removing MPs from runoff stormwater,the purification efficiency of different fillers and their influencing factors,and the accumulation,fate,and aging of MPs in bioretention cells are described.Furthermore,the hazards of MP accumulation on the performance of bioretention cells are summarised.Future directions for removing MPs in bioretention cells are proposed:(1)research on MPs smaller than 100μm;(2)influence of MPs aging process on bioretention cells;(3)exploration of more effective fillers to enhance their removal efficiency;(4)research on synergistic removal mechanism of MPs and other pollution.
基金supported by the National Natural Science Foundation of China(No.U20A20108)the National Key Research and Development Program of China(No.2022YFD1700102)the Key Research and Development Program of Hunan Province(No.2022NK2014).
文摘Several studies have demonstrated that reintroducing crop straw to fields may intensify cadmium(Cd)contamination in agricultural soils.However,the specific effects of long-term straw management practices on Cd concentration and its bioavailability in soil-rice ecosystems remain unclear.In this context,to explore the influence of straw return(SR)and straw removal(NSR)on Cd accumulation in both soil and rice within a double-cropping system,we conducted a four-year field study.Our research study unveiled that NSR consistently decreased soil Cd concentration and its bioavailability by approximately 16.93%–27.30%and 8.23%–21.05%respectively across both study sites.Conversely,SR resulted in a substantial increase in soil Cd bioavailability,ranging from 38.64%–53.95%.Notably,compared to NSR,SR significantly increased total soil Cd by 5.47%–36.58%and increased Cd content in brown rice by 8.00%–100.24%.Remarkably,after four consecutive years of NSR,brown rice Cd concentration at the Changfeng site compiled with national safety standards(GB 2762–2022).Additionally,returning early rice strawsignificantly raised soil Cd bioavailability for the subsequent crop,more so than late rice straw did for the early rice the following year.The findings suggest that traditional double-cropping cultivation with straw removal can effectively mitigate Cd contamination risks in crops and farmland in Hunan Province.
基金supported by the National Natural Science Foundation of China (Grant Nos.52304227 and 52104133)Scientific and Technological Research Platform for Disaster Prevention and Control of Deep Coal Mining (Anhui University of Science and Technology) (Grant No.DPDCM2208).
文摘To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.
基金support from the earmarked fund for XJARS(No.XJARS-06)the Bingtuan Science and Technology Program(Nos.2021DB019,2022CB001-01)+1 种基金the National Natural Science Foundation of China(No.42275014)the Guangdong Foundation for Program of Science and Technology Research,China(No.2023B1212060044)。
文摘Current research primarily focuses on emerging organic pollutants,with limited attention to emerging inorganic pollutants (EIPs).However,due to advances in detection technology and the escalating environmental and health challenges posed by pollution,there is a growing interest in treating waters contaminated with EIPs.This paper explores biochar characteristics and modification methods,encompassing physical,chemical,and biological approaches for adsorbing EIPs.It offers a comprehensive review of research advancements in employing biochar for EIPs remediation in water,outlines the adsorption mechanisms of EIPs by biochar,and presents an environmental and economic analysis.It can be concluded that using biochar for the adsorption of EIPs in wastewater exhibits promising potential.Nonetheless,it is noteworthy that certain EIPs like Au(III),Rh(III),Ir(III),Ru(III),Os(III),Sc(III),and Y(III),have not been extensively investigated regarding their adsorption onto biochar.This comprehensive review will catalyze further inquiry into the biochar-based adsorption of EIPs,addressing current research deficiencies and advancing the practical implementation of biochar as a potent substrate for EIP removal from wastewater streams.
基金Project(2018YFC1900403) supported by the National Key Research and Development Program of ChinaProject(CX20210197) supported by the Postgraduate Scientific Research Innovation Project of Hunan Province,China+1 种基金Project(202206370103) supported by the China Scholarship CouncilProject(2021zzts0115) supported by the Fundamental Research Funds for the Central Universities,China。
文摘The goethite residue generated from zinc hydrometallurgy is classified as hazardous solid waste,produced in large quantities,and results in significant zinc loss.The study was conducted on removing iron from FeSO_(4)-ZnSO_(4) solution,employing seed-induced nucleation methods.Analysis of the iron removal rate,residue structure,morphology,and elemental composition involved ICP,XRD,FT-IR,and SEM.The existing state of zinc was investigated by combining step-by-step dissolution using hydrochloric acid.Concurrently,iron removal tests were extended to industrial solutions to assess the influence of seeds and solution pH on zinc loss and residue yield.The results revealed that seed addition increased the iron removal rate by 3%,elevated the residual iron content by 6.39%,and mitigated zinc loss by 29.55%in the simulated solution.Seed-induced nucleation prevented excessive nuclei formation,fostering crystal stable growth and high crystallinity.In addition,the zinc content of surface adsorption and crystal internal embedding in the residue was determined,and the zinc distribution on the surface was dense.In contrast,the total amount of zinc within the crystal was higher.The test results in the industrial solution demonstrated that the introduction of seeds expanded the pH range for goethite formation and growth,and the zinc loss per ton of iron removed was reduced by 50.91 kg(34.12%)and the iron residue reduced by 0.17 t(8.72%).
基金Supported by the National Natural Science Foundation of China(62201171).
文摘Wigner-Ville distribution(WVD)is widely used in the field of signal processing due to its excellent time-frequency(TF)concentration.However,WVD is severely limited by the cross-term when working with multicomponent signals.In this paper,we analyze the property differences between auto-term and cross-term in the one-dimensional sequence and the two-dimensional plane and approximate entropy and Rényi entropy are employed to describe them,respectively.Based on this information,we propose a new method to achieve adaptive cross-term removal by combining seeded region growing.Compared to other methods,the new method can achieve cross-term removal without decreasing the TF concentration of the auto-term.Simulation and experimental data processing results show that the method is adaptive and is not constrained by the type or distribution of signals.And it performs well in low signal-to-noise ratio environments.
基金financial support from the National Key Research and Development Program of China(2018YFA0703400)the Fundamental Research Funds for the Provincial Universities of Zhejiang(GK239909299001021)+1 种基金the Ninth China Association for Science and Technology Youth Talent Lift Project Support Plan(KYZ015324002)the Changjiang Scholars Program of Chinese Ministry of Education。
文摘Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machining.Noxious slurries are widely used in conventional chemical mechanical polishing(CMP),resulting in the possible pollution to the environment.Moreover,the traditional slurries normally contain more than four ingredients,causing difficulties to control the process and quality of CMP.To solve these challenges,a novel green CMP for single crystal diamond was developed,consisting of only hydrogen peroxide,diamond abrasive and Prussian blue(PB)/titania catalyst.After CMP,atomic surface is achieved with surface roughness Sa of 0.079 nm,and the MRR is 1168 nm·h^(-1).Thickness of damaged layer is merely 0.66 nm confirmed by transmission electron microscopy(TEM).X-ray photoelectron spectroscopy,electron paramagnetic resonance and TEM reveal that·OH radicals form under ultraviolet irradiation on PB/titania catalyst.The·OH radicals oxidize diamond,transforming it from monocrystalline to amorphous atomic structure,generating a soft amorphous layer.This contributes the high MRR and formation of atomic surface on diamond.The developed novel green CMP offers new insights to achieve atomic surface of diamond for potential use in their high-performance devices.
基金Project supported by the National Natural Science Foundation of China(62175266,61775245)。
文摘The removal of harmful cyanobacterial blooms(HCBs)and reuse of the resulting algal sludge are pressing issues in current environmental governance and ecological conservation.Aiming at tackling the abovementioned challenges,titanium(Ti)-based coagulants are promising candidates.However,most of them suffer from poor stability and weak actual algal removal ability,and recycling of the algal sludge usually produces titanium dioxide(TiO_(2))with low photocatalytic ability.In this work,a lanthanum(La)-modified polytitanium chloride(La-PTC)coagulant is reported.La in the La-PTC coagulant serves a"kill two birds with one stone"strategy in algae removal and algae sludge reuse.Owing to the introduction of La ions,the La-PTC coagulant exhibits ultra-high stability and excellent algae removal capability with an efficiency of 98.71%,which is 7.25%higher than that of PTC coagulant.Moreover,recycling algae sludge can prepare high catalytic(2.45 times the commercial P25 TiO_(2))La/C-TiO_(2),where the presence of La enhances its visible light response range and inhibits electron hole recombination.The strategy of this La modified coagulant can not only achieve efficient re moval of HCBs,but also transfo rm the recovered algal sludge into photocatalysts with higher catalytic capacity.
基金financially supported by the Natural Science Foundation of ShanDong(Nos.ZR2023QD152 and ZR2021MD002).
文摘The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most popular method for overcoming the above inadequacies.In this work,a CdZnS/TiO_(2) membrane photocatalyst with adjustable suspended depth(include floating)and flexible assembly is designed,which is less prone to dislodgement due to in situ synthesis and has a wider range of applicability than previously reported photocatalysts.The photocatalytic removal of Microcystis aeruginosa revealed that the suspended depth and distribution format of the CdZnS/TiO_(2) membrane photocatalysts have striking effects on the photocatalytic removal performance of Microcystis aeruginosa,the photocatalytic removal efficiency of CdZnS/TiO_(2)-2 membrane photocatalysts for Microcystis aeruginosa could reach to 98.6%in 60 min when the photocatalysts assembled in the form of 3×3 arrays suspended at a depth of 2 cm from the liquid surface.A tiny amount of TiO_(2) loading allows the formation of Z-Scheme heterojunction,resulting in accelerating the separation efficiency of photogenerated carriers,preserving the photogenerated electrons and holes with stronger reduction and oxidation ability and inhabiting the photo-corrosion of CdZnS.
基金supported by the National Natural Science Foundation of China(22278066,21776039)the National Key R&D Program of China(2023YFB4103001)The Fundamental Research Funds for the Central Universities(DUT2021TB03).
文摘Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.
基金Project(52174385)supported by the National Natural Science Foundation of ChinaProjects(2023YFC3904003,2023YFC3904004,2023YFC390400501)supported by the National Key R&D Program of China。
文摘Copper is a strategic metal that plays an important role in many industries.In copper metallurgy,electrolytic refining is essential to obtain high-purity copper.However,during the electrolytic refining process,impurities such as arsenic are introduced into the electrolyte,which significantly affect the subsequent production and quality of copper products.This paper first discusses the sources,forms,and transformation pathways of arsenic in copper electrolyte during the electrolytic process,then reviews various arsenic removal technologies in detail,including electrowinning,adsorption,solvent extraction,ion exchange,membrane filtration,and precipitation.Particular emphasis is placed on electrowinning,which is the most widely used and mature among these arsenic removal techniques.The paper evaluates these methods based on arsenic removal efficiency,cost effectiveness,technical maturity,environmental friendliness,and operation simplicity.In addition,the paper explores future trends in copper electrolyte purification,focusing on waste reduction at source,resource utilization,intelligent digitalization,and innovations in materials and processes.This review aims to provide researchers and practitioners with a comprehensive and in-depth reference on arsenic removal methods in copper electrolytes.
基金supported by the Innovation Team and Talents Cultivation Program of National Administration of Traditional Chinese Medicine(ZYYCXTD-C-202006)the High-level traditional Chinese medicine key subject construction project of National Administration of Traditional Chinese Medicine-Evidence-based Traditional Chinese Medicine(ZYYZDXK-2023249).
文摘Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a knowledge mapping was generated based on published studies to investigate the characteristics of bibliometric studies on acupuncture and the extent of duplicate publications,with the overarching goal of providing a comprehensive overview of the knowledge structure in this field.Methods:This cross-sectional study used three databases(PubMed,Web of Science,and Scopus)to identify relevant studies up to May 1,2024.In addition,the reference lists were retrieved as a supplement.To track research trends,we employed Microsoft Excel and R software to extract,code,and analyze information.Study selection,data extraction,and validation were performed independently by at least two reviewers.The reporting quality of included studies was assessed using the Preliminary guideline for reporting bibliometric reviews of the biomedical literature(BIBLIO).Results:Among the 6,221 bibliometric reviews examined,113 relevant publications were identified,80 focusing on various diseases/conditions.The annual number of publications has gradually increased,with the output in the past four years being 3.52 times higher than that before 2020.China(106)and Chengdu University of Traditional Chinese Medicine(16)have the highest number of publications.The most prolific author is Fan-Rong Liang,with six articles.The first bibliometric study,by Hai-Yan Li,was published in 2010.Journal of Pain Research,with 36 articles,holds the most publications.The top three diseases:diseases of the nervous system;symptoms,signs,or clinical findings not elsewhere classified;and mental,behavioral,or neurodevelopmental disorders.There may be potential duplication in research on 13 diseases/conditions,notably stroke,migraine,pain/analgesia,cancer pain,shoulder pain,facial paralysis/bell’s palsy,chronic pain,and cognitive impairment.In BIBLIO,the most frequently missing items are issues/topics(item 2),quality assessment(item 11),and descriptive findings(item 13).Conclusion:This study demonstrates that acupuncture bibliometrics is actively utilized to identify dominant diseases/conditions,aiding scholars in understand the knowledge structure and main topics.Although the number of related studies is increasing,with an average of 25 studies annually,overlap in some areas highlights the need for adherence to reporting guidelines and careful topic selection to ensure truly valuable insights and knowledge contributions.The adherence to BIBLIO’s 20 proposed items across analyzed articles,highlighting important in reporting practices.
基金funded by Tianjin Key Medical Discipline(Specialty)Construction Project,China(Grant No.TJYXZDXK-011A)Tianjin Medical University Cancer Institute&Hospital Nursing Special Fund Project(H2304)。
文摘Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods:A total of 217 young breast cancer patients were enrolled from a tertiary Grade A oncology hospital in Tianjin,China,using the convenience sampling method.All participants completed the general questionnaire,Ambivalence over Emotion Expression Questionnaire(AEQ),and Family Adapt-Ability and Cohesion Evaluation Scales-Chinese Version(FACES-CV).We employed exploratory latent profileanalysis for ambivalence over emotional expression profilingand logistic regression analysis to identify the influentialfactors Results:The results of the latent profileanalysis supported the models of four latent profiles,which were definedas“low conflict-lowexpression reflection”(19.2%),“high conflict-high inhibition expression”(43.9%),“moderate conflict-highregret expression”(18.1%),and“moderate conflict-desire understand”(18.8%).Logistic regression revealed that family cohesion,marital status,residence,per capita monthly income,and cancer stage were the influencingfactors of ambivalence over emotional expression in young breast cancer patients(P<0.05)Conclusions:Levels of ambivalence over emotional expression ameast cancer patients with breast cancer were highly heterogeneous.Medical staff should provide psychological counseling and health education tailored to the unique characteristics of emotional expression ambivalence in different patient groups to promote healthy emotional expression among patients.
