Fluid dynamic research on rectangular and trapezoidal fins is aimed at increasing heat transfer by means of large surfaces.The trapezoidal cavity form is compared with its thermal and flow performance,and it is reveal...Fluid dynamic research on rectangular and trapezoidal fins is aimed at increasing heat transfer by means of large surfaces.The trapezoidal cavity form is compared with its thermal and flow performance,and it is revealed that trapezoidal fins tend to be more efficient,particularly when material optimization is critical.Motivated by the increasing need for sustainable energy management,this work analyses the thermal performance of inclined trapezoidal and rectangular porous fins utilising a unique hybrid nanofluid.The effectiveness of nanoparticles in a working fluid is primarily determined by their thermophysical properties;hence,optimising these properties can significantly improve overall performance.This study considers the dispersion of Graphene Oxide(GO)and Molybdenum Disulfide in the base fluid,engine oil.Temperature profiles are analysed by altering the radiative,porosity,wet porous,and angle of inclination parameters.Surface and contour plots are constructed by using the Lobatto IIIa Collocation Method with BVP5C solver in MATLAB and Gradient Descent Optimisation to predict the combined heat transfer rate.According to the study,fluid temperature consistently decreases when the angle of inclination,wet porous parameter,porosity parameter,and radiative parameter increase,suggesting significantly improved heat dissipation.The trapezoidal fin consistently exhibits a superior heat transfer mechanism than a rectangular fin.It is found that the trapezoidal fin transmits heat at a rate that is 0.05%higher than that of the rectangular fin.Validation of the present study is done through the comparison of previous studies.This research provides useful design insights for sophisticated engineering uses,including electrical cooling devices,heat exchangers,radiators,and solar heaters.展开更多
Rectangular explosive charges are usually used in military or civilian explosive transportation and storage.The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blas...Rectangular explosive charges are usually used in military or civilian explosive transportation and storage.The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation,which is significant for the design of blast-resistant structures.In this paper,the side-length ratio of the rectangle,orientation,and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg^(1/3) with well validated 3D numerical simulations.The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge;if the blast load of the rectangular charge is simply evaluated with the spherical charge,the maximum peak overpressure(maximum impulse)will be underestimated by a factor of 7.46(4.84).This must be taken seriously by blast-resistant structure designers.With the increase in the scaled distance,when the critical scaled distance is greater than 6.32(7.38)m/kg^(1/3),the influence of the charge shape on the maximum peak overpressure(maximum impulse)of the spatial blast load can be ignored.In general,the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation,but for the impact of the maximum impulse,it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face.Furthermore,the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed,and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load.These analysis results provide a reference for the explosion protection design in near-field air explosions.展开更多
Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation...Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation of rectangular jacked pipes and the distribution of the earth pressure on jacked pipes,we present an analytical solution for predicting the vertical earth pressure on deep-buried rectangular pipe jacking tunnels,incorporating the tunnelling-induced ground loss distribution.Our proposed analytical model consists of the upper multi-layer parabolic soil arch and the lower friction arch.The key parameters(i.e.,width and height of friction arch B and height of parabolic soil arch H 1)are determined according to the existing research,and an analytical solution for K l is derived based on the distribution characteristics of the principal stress rotation angle.With consideration for the transition effect of the mechanical characteristics of the parabolic arch zone,an analytical solution for soil load transfer is derived.The prediction results of our analytical solution are compared with tests and simulation results to validate the effectiveness of the proposed analytical solution.Finally,the effects of different parameters on the soil pressure are discussed.展开更多
In this work,numerical simulations are performed to investigate the influence of combining ribs and triangular cavities on the thermal-hydraulic performance(THP)of MCHS at fluid velocities ranging from1 to 4 m/s(corre...In this work,numerical simulations are performed to investigate the influence of combining ribs and triangular cavities on the thermal-hydraulic performance(THP)of MCHS at fluid velocities ranging from1 to 4 m/s(corresponding to Reynolds numbers(Re)of 129.75 to 519).Specifically,the ribs are positioned on the bottomwall,and the rib width is equal to the mini-channel width,while the triangular cavities are arranged on the two side walls of the MCHS.By analyzing and comparing key parameters such as velocity distribution,streamline patterns,pressure drop,skin friction coefficient(C_(f)),Nusselt number(Nu),friction factor(f),temperature fields,and performance evaluation criterion(PEC),the advantages of rib-cavity coupling configuration in enhancing THP are systematically discussed.Furthermore,the effects of cavity distribution(left,middle,and right),cavity depth(0.04,0.06,and 0.08 mm),and rib height(0.02,0.04,and 0.06 mm)on THP are analyzed to optimize the geometric parameters of the ribs and the cavities.The numerical simulation results indicate that,in comparison to the use of ribs or cavities alone,rib-cavity coupling can further improve the THP ofMCHS without causing a significant increase in pressure drop.The downstreamwall of the cavity is perpendicular to the flow direction which is more favorable for enhancing the heat transfer performance.Increasing the cavity depth improves the heat transfer performance ofMCHS,themaximumNu ratio increase by 35%at a rib height of 0.06 mm.However the increase in the rib height leads to a significant increase in the pressure drop,which in turn exerts a negative impact on THP,a maximumPEC of 1.198 is obtained at a rig height of 0.02 mm.The greatest improvement in THP,reaching 19.8%,is achieved when the cavity depth is 0.08 mm and the rib height is 0.02 mm.展开更多
This study investigates the nonlinear dynamic properties of rotating functionally graded sandwich rectangular plates in a thermal environment.The nonlinear vibration equations for a rotating metal-ceramic functionally...This study investigates the nonlinear dynamic properties of rotating functionally graded sandwich rectangular plates in a thermal environment.The nonlinear vibration equations for a rotating metal-ceramic functionally graded sandwich rectangular plate in a thermal environment are derived using classical thin plate theory and Hamilton’s principle,considering geometric nonlinearity,temperature-dependent material properties,and power law distribution of components through the thickness.With cantilever boundary conditions,the flexural nonlinear differential equations of the rectangular sandwich plate are obtained via the Galerkin method.Since the natural vibration differential equations exhibit nonlinear characteristics,the multiscale method is employed to derive the expression for nonlinear natural frequency.An example analysis reveals how the natural frequency of a functionally graded sandwich rectangular plate varies with rotational speed and temperature.Results show that the nonlinear/linear frequency ratio increases with rotational angular velocity Ω and thickness-to-length ratio h/a,follows a cosine-like periodic pattern with the setting angle,and shows a sharp decrease followed by a rapid increase with increasing width-to-length ratio b/a.The derived analytical solutions for nonlinear frequency provide valuable insights for assessing the dynamic characteristics of functionally graded structures.展开更多
The growing need for enhanced heat dissipation is compelling the development of more effective heat exchangers.Innovation inspired by nature bionics,four types of leaf-shaped pin fins were proposed and four combinatio...The growing need for enhanced heat dissipation is compelling the development of more effective heat exchangers.Innovation inspired by nature bionics,four types of leaf-shaped pin fins were proposed and four combinations of them were considered.The leaf-shaped design of the cooling pin fin enhances uniformity and synergy,effectively creating an optimized flow path that boosts cooling performance.Eight three-dimensional conjugate heat transfer models in staggered arrangement were developed using ANSYS-Fluent software.Aluminum6061material was used as the heat sinkmaterial and single-phase liquid water flowed through the rectangular channel where the Reynolds(R_(e))number varies from 40 to 100.Using the same boundary conditions as the software simulations,two leaf-shaped channels were printed to validate numerical models.Velocity field and temperature differences of the eight proposed leaf-shaped pin fins configurations were discussed by comparison with cylindrical pin fins.Based on the findings of this study,at a Reynolds number of 80,the Leaf B Staggered Array(LBSA)records a maximum temperature that is 0.72 K lower than that of the cylindrical pin fins arrangement.Additionally,the LBSA exhibits a reduction in the friction factor by approximately 33.3%relative to the circular pin fins array under the same R_(e).This implies that the design of LBSA has been optimized to provide better heat dissipation performance while maintaining lower energy consumption.Furthermore,the LBSA demonstrates the most favorable thermal-hydraulic performance index(TPI),which is 1.18 times higher than that of the circular pin fins arrangement at R_(e)=80.The temperature reduction and friction factor reduction of the lobed channel is more pronounced than that of the conventional cooling channel,highlighting its potential to increase heat transfer efficiency and reduce energy consumption in practical applications.展开更多
To investigate groundwater influence on stability and rockburst mechanism of deep hard-rock rectangular tunnels,water-immersed treatment and uniaxial compressive acoustic emission(AE)experiments were conducted on rect...To investigate groundwater influence on stability and rockburst mechanism of deep hard-rock rectangular tunnels,water-immersed treatment and uniaxial compressive acoustic emission(AE)experiments were conducted on rectangular tunnel specimens.Energy dissipation characteristics,AE evolution characteristics and damage evolution characteristics of rectangular tunnels were analysed under waterimmersed condition.Under water-immersed condition,tunnel specimens were quite sensitive to water.Average peak stress and average peak strain energy exhibited negative exponential decay with waterimmersed time.Among them,after 12 d of water immersion,average peak stress of specimens decreased by 28%.Average total strain energy decreased by 70%.Average elastic strain energy decreased by 71%and average dissipated strain energy decreased by 68%.After 62 d of water immersion,average peak stress of specimens decreased by 34%.Average total strain energy decreased by 78%.Average elastic strain energy decreased by 79%and average dissipated strain energy decreased by 75%.Water weakened bonding among mineral particles.Moreover,it undermined load-bearing capacity and diminished energystorage properties.Under high stress,massive releasable elastic strain energy stored in natural specimens within pre-peak stage may abruptly release after peak stress.This caused rapid crack development and connection in specimens.During accumulation and release of elastic strain energy,initial failure typically occurred at sidewalls.This failure location was not affected by water.Compared with natural specimens,Specimens immersed in water for 62 d had the lowest peak values of cumulative amplitude,cumulative AE energy and cumulative AE count.After 62 d of water immersion,peak values of cumulative amplitude,cumulative AE energy and cumulative AE count of specimens decreased by 84%,97%and 99%.Compared with AE damage model,fitting degree of energy damage model was higher.For natural specimens,fitting degree of energy damage model was 0.96.For specimens immersed in water for 12 d,fitting degree of energy damage model was 0.96.For specimens immersed in water for 62 d,fitting degree of energy damage model was 0.72.Therefore,an energy damage model had more remarkable applicability and reliability.By establishing dynamic mapping relationship between energy and damage in the model,accuracy of rockburst early warning has been significantly improved.This provided scientific basis for support structure design of rectangular tunnels and regulation of high strain energy.展开更多
The behavior of single-phase flow and conjugate heat transfer in micro-channel heat sinks(MCHS)subjected to auniform heat flux is investigated by means of numerical simulations.Various geometrical configurations areex...The behavior of single-phase flow and conjugate heat transfer in micro-channel heat sinks(MCHS)subjected to auniform heat flux is investigated by means of numerical simulations.Various geometrical configurations areexamined,particularly,the combinations of rectangular solid and perforated blocks,used to create a disturbancein the flow.The analysis focuses on several key aspects and related metrics,including the temperature distribution,the mean Fanning friction factor,the pressure drop,the Nusselt number,and the overall heat transfer coefficientacross a range of Reynolds numbers(80–870).It is shown that the introduction of such blocks significantlyenhances the heat transfer performances of the MCHS compared to the straight-through flow channel.Specifically,a case is found where the Nusselt number increases by 2.3 times relative to the reference case.The integrationof perforated blocks facilitates the generation of vorticity within the channel,promoting the mixing of coldand hot fluids.Notably,MCHS incorporating perforated rectangular blocks exhibit more pronounced heat transferbenefits at Reynolds numbers smaller than 400.展开更多
The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition a...The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition at the corner point. The former can be solved directly by the equilibrium differential equation and the boundary conditions of four edges of the plate. The latter can be solved by using the superposition principle. Making use of the recommended method, the bending of the plate with all kinds of...展开更多
Experimental results of new type joints between the column and the. steel beam of concrete-filled rectangular steel tubular （CFRT） under reversed cyclic loads are presented. The earthquake resistant capacity of the ...Experimental results of new type joints between the column and the. steel beam of concrete-filled rectangular steel tubular （CFRT） under reversed cyclic loads are presented. The earthquake resistant capacity of the joint is influenced by infilled concrete, stiffener length and relative dimensions of column and beam. It is found that the hysteresis curves obtained in the experiment are full and the joints have a good energy dissipation capacity. The nonlinear finite element models are also used to analyze the hysteresis behavior of the joints under reversed cyclic loads using ANSYS 8.0. The influences of the stiffener length and the infilled concrete are analyzed. Analytical results show that the stiffener length and the infilled concrete are critical for the joints. Furthermore, the skeleton curves of the finite element models are in good agreement with those of experiments.展开更多
In integrated circuits, the defects associated with photolithography are assumed to be in the shape of circular discs in order to perform the estimation of yield and fault analysis. However,real defects exhibit a grea...In integrated circuits, the defects associated with photolithography are assumed to be in the shape of circular discs in order to perform the estimation of yield and fault analysis. However,real defects exhibit a great variety of shapes. In this paper,a novel yield model is presented and the critical area model of short circuit is correspondingly provided. In comparison with the circular model corrently available, the new model takes the similarity shape to an original defect, the two-dimensional distributional characteristic of defects, the feature of a layout routing and the character of yield estimation into account. As for the aspect of prediction of yield, the experimental results show that the new model may predict the yield caused by real defects more accurately than the circular model does. It is significant that the yield is accurately estimated and improved using the proposed model.展开更多
To the most of velocity fields, the traveltimes of the first break that seismic waves propagate along rays can be computed on a 2-D or 3-D numerical grid by finite-difference extrapolation. Under ensuring accuracy, to...To the most of velocity fields, the traveltimes of the first break that seismic waves propagate along rays can be computed on a 2-D or 3-D numerical grid by finite-difference extrapolation. Under ensuring accuracy, to improve calculating efficiency and adaptability, the calculation method of first-arrival traveltime of finite-difference is de- rived based on any rectangular grid and a local plane wavefront approximation. In addition, head waves and scat- tering waves are properly treated and shadow and caustic zones cannot be encountered, which appear in traditional ray-tracing. The testes of two simple models and the complex Marmousi model show that the method has higher accuracy and adaptability to complex structure with strong vertical and lateral velocity variation, and Kirchhoff prestack depth migration based on this method can basically achieve the position imaging effects of wave equation prestack depth migration in major structures and targets. Because of not taking account of the later arrivals energy, the effect of its amplitude preservation is worse than that by wave equation method, but its computing efficiency is higher than that by total Green′s function method and wave equation method.展开更多
The environment modeling algorithm named rectangular decomposition, which is composed of cellular nodes and interleaving networks, is proposed. The principle of environment modeling is to divide the environment into i...The environment modeling algorithm named rectangular decomposition, which is composed of cellular nodes and interleaving networks, is proposed. The principle of environment modeling is to divide the environment into individual square sub-areas. Each sub-area is orientated by the central point of the sub-areas called a node. The rectangular map based on the square map can enlarge the square area side size to increase the coverage efficiency in the case of there being an adjacent obstacle. Based on this algorithm, a new coverage algorithm, which includes global path planning and local path planning, is introduced. In the global path planning, uncovered subspaces are found by using a special rule. A one-dimensional array P, which is used to obtain the searching priority of node in every direction, is defined as the search rule. The array P includes the condition of coverage towards the adjacent cells, the condition of connectivity and the priorities defined by the user in all eight directions. In the local path planning, every sub-area is covered by using template models according to the shape of the environment. The simulation experiments show that the coverage algorithm is simple, efficient and adapted for complex two- dimensional environments.展开更多
基金supported by the“Regional Innovation System&Education(RISE)”through the Seoul RISE Center,funded by the Ministry of Education(MOE)and the Seoul Metropolitan Government(2025-RISE-01-027-04).
文摘Fluid dynamic research on rectangular and trapezoidal fins is aimed at increasing heat transfer by means of large surfaces.The trapezoidal cavity form is compared with its thermal and flow performance,and it is revealed that trapezoidal fins tend to be more efficient,particularly when material optimization is critical.Motivated by the increasing need for sustainable energy management,this work analyses the thermal performance of inclined trapezoidal and rectangular porous fins utilising a unique hybrid nanofluid.The effectiveness of nanoparticles in a working fluid is primarily determined by their thermophysical properties;hence,optimising these properties can significantly improve overall performance.This study considers the dispersion of Graphene Oxide(GO)and Molybdenum Disulfide in the base fluid,engine oil.Temperature profiles are analysed by altering the radiative,porosity,wet porous,and angle of inclination parameters.Surface and contour plots are constructed by using the Lobatto IIIa Collocation Method with BVP5C solver in MATLAB and Gradient Descent Optimisation to predict the combined heat transfer rate.According to the study,fluid temperature consistently decreases when the angle of inclination,wet porous parameter,porosity parameter,and radiative parameter increase,suggesting significantly improved heat dissipation.The trapezoidal fin consistently exhibits a superior heat transfer mechanism than a rectangular fin.It is found that the trapezoidal fin transmits heat at a rate that is 0.05%higher than that of the rectangular fin.Validation of the present study is done through the comparison of previous studies.This research provides useful design insights for sophisticated engineering uses,including electrical cooling devices,heat exchangers,radiators,and solar heaters.
基金supported by the National Science Foundation of China(Grant No.14102428)the Fundamental Research Funds for the Central Universities(Grant Nos.WK2090000019 and YD2480002002)the Open Research Fund of Anhui Province Key Laboratory of Green Building and Assembly Construction,Anhui Institute of Building Research&Design(Grant No.2021-JKYL-005).
文摘Rectangular explosive charges are usually used in military or civilian explosive transportation and storage.The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation,which is significant for the design of blast-resistant structures.In this paper,the side-length ratio of the rectangle,orientation,and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg^(1/3) with well validated 3D numerical simulations.The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge;if the blast load of the rectangular charge is simply evaluated with the spherical charge,the maximum peak overpressure(maximum impulse)will be underestimated by a factor of 7.46(4.84).This must be taken seriously by blast-resistant structure designers.With the increase in the scaled distance,when the critical scaled distance is greater than 6.32(7.38)m/kg^(1/3),the influence of the charge shape on the maximum peak overpressure(maximum impulse)of the spatial blast load can be ignored.In general,the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation,but for the impact of the maximum impulse,it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face.Furthermore,the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed,and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load.These analysis results provide a reference for the explosion protection design in near-field air explosions.
基金Project(2022YJS073)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2024YFE0198500)supported by the National Key Research and Development Program of China:Intergovernmental International Science and Technology Innovation CooperationProject(U2469207)supported by the National Natural Science Foundation Railway Innovation and Development Joint Fund Project,China。
文摘Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation of rectangular jacked pipes and the distribution of the earth pressure on jacked pipes,we present an analytical solution for predicting the vertical earth pressure on deep-buried rectangular pipe jacking tunnels,incorporating the tunnelling-induced ground loss distribution.Our proposed analytical model consists of the upper multi-layer parabolic soil arch and the lower friction arch.The key parameters(i.e.,width and height of friction arch B and height of parabolic soil arch H 1)are determined according to the existing research,and an analytical solution for K l is derived based on the distribution characteristics of the principal stress rotation angle.With consideration for the transition effect of the mechanical characteristics of the parabolic arch zone,an analytical solution for soil load transfer is derived.The prediction results of our analytical solution are compared with tests and simulation results to validate the effectiveness of the proposed analytical solution.Finally,the effects of different parameters on the soil pressure are discussed.
基金funded by the Sichuan Natural Science Foundation,grant number 2023NSFSC0870.
文摘In this work,numerical simulations are performed to investigate the influence of combining ribs and triangular cavities on the thermal-hydraulic performance(THP)of MCHS at fluid velocities ranging from1 to 4 m/s(corresponding to Reynolds numbers(Re)of 129.75 to 519).Specifically,the ribs are positioned on the bottomwall,and the rib width is equal to the mini-channel width,while the triangular cavities are arranged on the two side walls of the MCHS.By analyzing and comparing key parameters such as velocity distribution,streamline patterns,pressure drop,skin friction coefficient(C_(f)),Nusselt number(Nu),friction factor(f),temperature fields,and performance evaluation criterion(PEC),the advantages of rib-cavity coupling configuration in enhancing THP are systematically discussed.Furthermore,the effects of cavity distribution(left,middle,and right),cavity depth(0.04,0.06,and 0.08 mm),and rib height(0.02,0.04,and 0.06 mm)on THP are analyzed to optimize the geometric parameters of the ribs and the cavities.The numerical simulation results indicate that,in comparison to the use of ribs or cavities alone,rib-cavity coupling can further improve the THP ofMCHS without causing a significant increase in pressure drop.The downstreamwall of the cavity is perpendicular to the flow direction which is more favorable for enhancing the heat transfer performance.Increasing the cavity depth improves the heat transfer performance ofMCHS,themaximumNu ratio increase by 35%at a rib height of 0.06 mm.However the increase in the rib height leads to a significant increase in the pressure drop,which in turn exerts a negative impact on THP,a maximumPEC of 1.198 is obtained at a rig height of 0.02 mm.The greatest improvement in THP,reaching 19.8%,is achieved when the cavity depth is 0.08 mm and the rib height is 0.02 mm.
基金supported by the National Natural Science Foundation of China(No.11772090).
文摘This study investigates the nonlinear dynamic properties of rotating functionally graded sandwich rectangular plates in a thermal environment.The nonlinear vibration equations for a rotating metal-ceramic functionally graded sandwich rectangular plate in a thermal environment are derived using classical thin plate theory and Hamilton’s principle,considering geometric nonlinearity,temperature-dependent material properties,and power law distribution of components through the thickness.With cantilever boundary conditions,the flexural nonlinear differential equations of the rectangular sandwich plate are obtained via the Galerkin method.Since the natural vibration differential equations exhibit nonlinear characteristics,the multiscale method is employed to derive the expression for nonlinear natural frequency.An example analysis reveals how the natural frequency of a functionally graded sandwich rectangular plate varies with rotational speed and temperature.Results show that the nonlinear/linear frequency ratio increases with rotational angular velocity Ω and thickness-to-length ratio h/a,follows a cosine-like periodic pattern with the setting angle,and shows a sharp decrease followed by a rapid increase with increasing width-to-length ratio b/a.The derived analytical solutions for nonlinear frequency provide valuable insights for assessing the dynamic characteristics of functionally graded structures.
基金supported by the Shandong Provincial Natural Science Foundation,China(Grant ZR2024ME136).
文摘The growing need for enhanced heat dissipation is compelling the development of more effective heat exchangers.Innovation inspired by nature bionics,four types of leaf-shaped pin fins were proposed and four combinations of them were considered.The leaf-shaped design of the cooling pin fin enhances uniformity and synergy,effectively creating an optimized flow path that boosts cooling performance.Eight three-dimensional conjugate heat transfer models in staggered arrangement were developed using ANSYS-Fluent software.Aluminum6061material was used as the heat sinkmaterial and single-phase liquid water flowed through the rectangular channel where the Reynolds(R_(e))number varies from 40 to 100.Using the same boundary conditions as the software simulations,two leaf-shaped channels were printed to validate numerical models.Velocity field and temperature differences of the eight proposed leaf-shaped pin fins configurations were discussed by comparison with cylindrical pin fins.Based on the findings of this study,at a Reynolds number of 80,the Leaf B Staggered Array(LBSA)records a maximum temperature that is 0.72 K lower than that of the cylindrical pin fins arrangement.Additionally,the LBSA exhibits a reduction in the friction factor by approximately 33.3%relative to the circular pin fins array under the same R_(e).This implies that the design of LBSA has been optimized to provide better heat dissipation performance while maintaining lower energy consumption.Furthermore,the LBSA demonstrates the most favorable thermal-hydraulic performance index(TPI),which is 1.18 times higher than that of the circular pin fins arrangement at R_(e)=80.The temperature reduction and friction factor reduction of the lobed channel is more pronounced than that of the conventional cooling channel,highlighting its potential to increase heat transfer efficiency and reduce energy consumption in practical applications.
基金funded by the National Science and Technology Major Project(No.2025ZD1700904)the National Natural Science Foundation of China(Nos.52174093 and 52034009)+1 种基金Fundamental Research Funds for the Central Universities(No.2023ZKPYNY03)Fundamental Research Funds for the Central Universities(Ph.D.Top Innovative Talents Fund of CUMTB)(No.BBJ2025002)。
文摘To investigate groundwater influence on stability and rockburst mechanism of deep hard-rock rectangular tunnels,water-immersed treatment and uniaxial compressive acoustic emission(AE)experiments were conducted on rectangular tunnel specimens.Energy dissipation characteristics,AE evolution characteristics and damage evolution characteristics of rectangular tunnels were analysed under waterimmersed condition.Under water-immersed condition,tunnel specimens were quite sensitive to water.Average peak stress and average peak strain energy exhibited negative exponential decay with waterimmersed time.Among them,after 12 d of water immersion,average peak stress of specimens decreased by 28%.Average total strain energy decreased by 70%.Average elastic strain energy decreased by 71%and average dissipated strain energy decreased by 68%.After 62 d of water immersion,average peak stress of specimens decreased by 34%.Average total strain energy decreased by 78%.Average elastic strain energy decreased by 79%and average dissipated strain energy decreased by 75%.Water weakened bonding among mineral particles.Moreover,it undermined load-bearing capacity and diminished energystorage properties.Under high stress,massive releasable elastic strain energy stored in natural specimens within pre-peak stage may abruptly release after peak stress.This caused rapid crack development and connection in specimens.During accumulation and release of elastic strain energy,initial failure typically occurred at sidewalls.This failure location was not affected by water.Compared with natural specimens,Specimens immersed in water for 62 d had the lowest peak values of cumulative amplitude,cumulative AE energy and cumulative AE count.After 62 d of water immersion,peak values of cumulative amplitude,cumulative AE energy and cumulative AE count of specimens decreased by 84%,97%and 99%.Compared with AE damage model,fitting degree of energy damage model was higher.For natural specimens,fitting degree of energy damage model was 0.96.For specimens immersed in water for 12 d,fitting degree of energy damage model was 0.96.For specimens immersed in water for 62 d,fitting degree of energy damage model was 0.72.Therefore,an energy damage model had more remarkable applicability and reliability.By establishing dynamic mapping relationship between energy and damage in the model,accuracy of rockburst early warning has been significantly improved.This provided scientific basis for support structure design of rectangular tunnels and regulation of high strain energy.
基金funded by the Project of the Hubei Provincial Department of Science and Technology(Grant No.2022CFB957)the Project of Hubei Engineering University of Teaching Research(Grant No.JY2024032)+1 种基金Ministry of Education University-Industry Cooperation Collaborative Education Project(Grant No.220903584161245)College Students’Innovation and Entrepreneurship Training Program(Grant Nos.DC2024031,DC2024032).
文摘The behavior of single-phase flow and conjugate heat transfer in micro-channel heat sinks(MCHS)subjected to auniform heat flux is investigated by means of numerical simulations.Various geometrical configurations areexamined,particularly,the combinations of rectangular solid and perforated blocks,used to create a disturbancein the flow.The analysis focuses on several key aspects and related metrics,including the temperature distribution,the mean Fanning friction factor,the pressure drop,the Nusselt number,and the overall heat transfer coefficientacross a range of Reynolds numbers(80–870).It is shown that the introduction of such blocks significantlyenhances the heat transfer performances of the MCHS compared to the straight-through flow channel.Specifically,a case is found where the Nusselt number increases by 2.3 times relative to the reference case.The integrationof perforated blocks facilitates the generation of vorticity within the channel,promoting the mixing of coldand hot fluids.Notably,MCHS incorporating perforated rectangular blocks exhibit more pronounced heat transferbenefits at Reynolds numbers smaller than 400.
文摘The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition at the corner point. The former can be solved directly by the equilibrium differential equation and the boundary conditions of four edges of the plate. The latter can be solved by using the superposition principle. Making use of the recommended method, the bending of the plate with all kinds of...
基金Supprorted by the Science and Technology Foundation of Jiangsu Construction Committee(JS200214)the Science Research Foundation of Nanjing Institute of Technology(KXJ08122)~~
文摘Experimental results of new type joints between the column and the. steel beam of concrete-filled rectangular steel tubular （CFRT） under reversed cyclic loads are presented. The earthquake resistant capacity of the joint is influenced by infilled concrete, stiffener length and relative dimensions of column and beam. It is found that the hysteresis curves obtained in the experiment are full and the joints have a good energy dissipation capacity. The nonlinear finite element models are also used to analyze the hysteresis behavior of the joints under reversed cyclic loads using ANSYS 8.0. The influences of the stiffener length and the infilled concrete are analyzed. Analytical results show that the stiffener length and the infilled concrete are critical for the joints. Furthermore, the skeleton curves of the finite element models are in good agreement with those of experiments.
文摘In integrated circuits, the defects associated with photolithography are assumed to be in the shape of circular discs in order to perform the estimation of yield and fault analysis. However,real defects exhibit a great variety of shapes. In this paper,a novel yield model is presented and the critical area model of short circuit is correspondingly provided. In comparison with the circular model corrently available, the new model takes the similarity shape to an original defect, the two-dimensional distributional characteristic of defects, the feature of a layout routing and the character of yield estimation into account. As for the aspect of prediction of yield, the experimental results show that the new model may predict the yield caused by real defects more accurately than the circular model does. It is significant that the yield is accurately estimated and improved using the proposed model.
基金National Natural Science Foundation of China (49894190-024) and Geophysical Prospecting Key Laboratory Foun- dation of China National Petroleum Corporation.
文摘To the most of velocity fields, the traveltimes of the first break that seismic waves propagate along rays can be computed on a 2-D or 3-D numerical grid by finite-difference extrapolation. Under ensuring accuracy, to improve calculating efficiency and adaptability, the calculation method of first-arrival traveltime of finite-difference is de- rived based on any rectangular grid and a local plane wavefront approximation. In addition, head waves and scat- tering waves are properly treated and shadow and caustic zones cannot be encountered, which appear in traditional ray-tracing. The testes of two simple models and the complex Marmousi model show that the method has higher accuracy and adaptability to complex structure with strong vertical and lateral velocity variation, and Kirchhoff prestack depth migration based on this method can basically achieve the position imaging effects of wave equation prestack depth migration in major structures and targets. Because of not taking account of the later arrivals energy, the effect of its amplitude preservation is worse than that by wave equation method, but its computing efficiency is higher than that by total Green′s function method and wave equation method.
基金The National Natural Science Foundation of China(No.50475076)the National High Technology Research and Development Pro-gram of China(863Program)(No.2006AA04Z234)
文摘The environment modeling algorithm named rectangular decomposition, which is composed of cellular nodes and interleaving networks, is proposed. The principle of environment modeling is to divide the environment into individual square sub-areas. Each sub-area is orientated by the central point of the sub-areas called a node. The rectangular map based on the square map can enlarge the square area side size to increase the coverage efficiency in the case of there being an adjacent obstacle. Based on this algorithm, a new coverage algorithm, which includes global path planning and local path planning, is introduced. In the global path planning, uncovered subspaces are found by using a special rule. A one-dimensional array P, which is used to obtain the searching priority of node in every direction, is defined as the search rule. The array P includes the condition of coverage towards the adjacent cells, the condition of connectivity and the priorities defined by the user in all eight directions. In the local path planning, every sub-area is covered by using template models according to the shape of the environment. The simulation experiments show that the coverage algorithm is simple, efficient and adapted for complex two- dimensional environments.
