Due to the limited scenes that synthetic aperture radar(SAR)satellites can detect,the full-track utilization rate is not high.Because of the computing and storage limitation of one satellite,it is difficult to process...Due to the limited scenes that synthetic aperture radar(SAR)satellites can detect,the full-track utilization rate is not high.Because of the computing and storage limitation of one satellite,it is difficult to process large amounts of data of spaceborne synthetic aperture radars.It is proposed to use a new method of networked satellite data processing for improving the efficiency of data processing.A multi-satellite distributed SAR real-time processing method based on Chirp Scaling(CS)imaging algorithm is studied in this paper,and a distributed data processing system is built with field programmable gate array(FPGA)chips as the kernel.Different from the traditional CS algorithm processing,the system divides data processing into three stages.The computing tasks are reasonably allocated to different data processing units(i.e.,satellites)in each stage.The method effectively saves computing and storage resources of satellites,improves the utilization rate of a single satellite,and shortens the data processing time.Gaofen-3(GF-3)satellite SAR raw data is processed by the system,with the performance of the method verified.展开更多
To mitigate the masking of weak target echoes by cumulative reverberation in continuous active sonar(CAS),and to achieve real-time reverberation suppression under the constraints of short detection windows,this paper ...To mitigate the masking of weak target echoes by cumulative reverberation in continuous active sonar(CAS),and to achieve real-time reverberation suppression under the constraints of short detection windows,this paper proposes a sequential subband sparse filtering with QR decomposition(QR)updates method based on low-rank and sparse decomposition.By leveraging the inherent sequential nature of CAS subband outputs,a low-rank background model is constructed via incremental QR updates.This framework allows for the rapid extraction of sparse components from each subband,effectively separating steady-state reverberation,reverberation fluctuations,and target echoes.Validation using shallow-water experimental data demonstrates that the proposed method achieves rapid convergence with only a few subband inputs.It significantly reduces interference from reverberation fluctuations,maintains the structural continuity of targets under low signal-to-noise ratio conditions,and improves the detectability of weak echoes.The online separation framework ensures superior computational efficiency while enhancing system adaptability to complex reverberant environments.展开更多
In this study,an automated multimodal system for detecting,classifying,and dating fruit was developed using a two-stage YOLOv11 pipeline.In the first stage,the YOLOv11 detection model locates individual date fruits in...In this study,an automated multimodal system for detecting,classifying,and dating fruit was developed using a two-stage YOLOv11 pipeline.In the first stage,the YOLOv11 detection model locates individual date fruits in real time by drawing bounding boxes around them.These bounding boxes are subsequently passed to a YOLOv11 classification model,which analyzes cropped images and assigns class labels.An additional counting module automatically tallies the detected fruits,offering a near-instantaneous estimation of quantity.The experimental results suggest high precision and recall for detection,high classification accuracy(across 15 classes),and near-perfect counting in real time.This paper presents a multi-stage pipeline for date fruit detection,classification,and automated counting,employing YOLOv11-based models to achieve high accuracy while maintaining real-time throughput.The results demonstrated that the detection precision exceeded 90%,the classification accuracy approached 92%,and the counting module correlated closely with the manual tallies.These findings confirm the potential of reducing manual labour and enhancing operational efficiency in post-harvesting processes.Future studies will include dataset expansion,user-centric interfaces,and integration with harvesting robotics.展开更多
This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert ...This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert triggering and light curve generation for transient sources.By applying the STRIP pipeline to both simulated and real observational data of the Mini-Si Tian survey,it successfully identified various types of variable sources,including stellar flares,supernovae,variable stars,and asteroids,while meeting requirements of reduction speed within 5 minutes.For the real observational data set,the pipeline detected one flare event,127 variable stars,and14 asteroids from three monitored sky regions.Additionally,two data sets were generated:one,a real-bogus training data set comprising 218,818 training samples,and the other,a variable star light curve data set with 421instances.These data sets will be used to train machine learning algorithms,which are planned for future integration into STRIP.展开更多
Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achie...Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction （HCI）-friendly in- terface based on VC ＋＋ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dua...Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
As a fundamental component in computer vision,edges can be categorized into four types based on discontinuities in reflectance,illumination,surface normal,or depth.While deep CNNs have significantly advanced generic e...As a fundamental component in computer vision,edges can be categorized into four types based on discontinuities in reflectance,illumination,surface normal,or depth.While deep CNNs have significantly advanced generic edge detection,real-time multi-class semantic edge detection under resource constraints remains challenging.To address this,we propose a lightweight framework based on PiDiNet that enables fine-grained semantic edge detection.Our model simultaneously predicts background and four edge categories from full-resolution inputs,balancing accuracy and efficiency.Key contributions include:a multi-channel output structure expanding binary edge prediction to five classes,supported by a deep supervision mechanism;a dynamic class-balancing strategy combining adaptive weighting with physical priors to handle extreme class imbalance;and maintained architectural efficiency enabling real-time inference.Extensive evaluations on BSDS-RIND show our approach achieves accuracy competitive with state-of-the-art methods while operating in real time.展开更多
In the era of the Internet of Things,distributed computing alleviates the problem of insufficient terminal computing power by integrating idle resources of heterogeneous devices.However,the imbalance between task exec...In the era of the Internet of Things,distributed computing alleviates the problem of insufficient terminal computing power by integrating idle resources of heterogeneous devices.However,the imbalance between task execution delay and node energy consumption,and the scheduling and adaptation challenges brought about by device heterogeneity,urgently need to be addressed.To tackle this problem,this paper constructs a multi-objective real-time task scheduling model that considers task real-time performance,execution delay,system energy consumption,and node interests.The model aims to minimize the delay upper bound and total energy consumption while maximizing system satisfaction.A real-time task scheduling algorithm based on bilateral matching game is proposed.By designing a bidirectional preference mechanism between tasks and computing nodes,combined with a multi-round stable matching strategy,accurate matching between tasks and nodes is achieved.Simulation results show that compared with the baseline scheme,the proposed algorithm significantly reduces the total execution cost,effectively balances the task execution delay and the energy consumption of compute nodes,and takes into account the interests of each network compute node.展开更多
During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study invest...During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study investigates the coupled thermo-mechanical behavior of granite during heating and cooling through a combination of laboratory tests and finite difference method analysis.Initial investigations involve X-ray diffraction,thermal expansion test,thermogravimetric analysis,and uniaxial compression test.Results show the significant variations of granite properties under different thermal conditions,attributed to temperature gradients,water evaporation,and mineral phase transitions.Subsequently,a model considering temperature-dependent parameters and real-time cooling rates was employed to simulate linear heating and nonlinear cooling processes.Simulation results indicate that the thermal cracking predominantly occurs during the heating stage,with tensile failure as the primary mode.Additionally,a faster real-time cooling rate at higher temperatures intensifies the thermal cracking behavior in granite.This study effectively elucidates the thermomechanical coupling behavior of granite during heating and cooling processes,providing insights into the mechanisms of mechanical property changes with rising or decreasing temperatures.展开更多
The intelligent environmental sensing systems are quickly transforming the sparse and retrospective monitoring to dense and decision-oriented environmental intelligence.This review brings together the manner in which ...The intelligent environmental sensing systems are quickly transforming the sparse and retrospective monitoring to dense and decision-oriented environmental intelligence.This review brings together the manner in which integration of Internet of Things(IoT)sensing,edge computing,and real-time analytics facilitates timely detection,interpretation,and prediction of the environmental conditions across the applications,such as urban air quality,watershed and coastal surveillance,industrial safety,agriculture,and disaster response.We define end-to-end architectural patterns to organize devices,edge nodes,and cloud services to satisfy latency,reliability,bandwidth,and governance constraints with emphasis on event-time processing,adaptive offloading,and hierarchical aggregation.Then we look at sensing and infrastructure foundations,emphasizing the effects of sensor modality and power autonomy,connectivity,and the practices of calibration on the practicable analytics and eventual plausibility.It is on this basis that we examine real-time analytics pipelines and Artificial Intelligence(AI)techniques to preprocess,sensor combine,anomaly detect,and short-horizon forecast,with a focus on edge-deployable models,quantification of uncertainties,and query resistance to drift and domain shift.Lastly,we address the realities of deployment that condition operational success,such as lifecycle engineering,provenance-aware data management,security and privacy risks,ethical governance,and evaluation methodologies,which place end-to-end latency and field generalization as a priority.This review offers cohesion to algorithmic capabilities and systems engineering and governance to define an overall framework,show open areas of research directions,and provide practical recommendations on how to design trustworthy,scalable,and sustainable environmental monitoring systems.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens...To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable pat...Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.展开更多
Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning appr...Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.展开更多
The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,th...The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.展开更多
基金Project(2017YFC1405600)supported by the National Key R&D Program of ChinaProject(18JK05032)supported by the Scientific Research Project of Education Department of Shaanxi Province,China。
文摘Due to the limited scenes that synthetic aperture radar(SAR)satellites can detect,the full-track utilization rate is not high.Because of the computing and storage limitation of one satellite,it is difficult to process large amounts of data of spaceborne synthetic aperture radars.It is proposed to use a new method of networked satellite data processing for improving the efficiency of data processing.A multi-satellite distributed SAR real-time processing method based on Chirp Scaling(CS)imaging algorithm is studied in this paper,and a distributed data processing system is built with field programmable gate array(FPGA)chips as the kernel.Different from the traditional CS algorithm processing,the system divides data processing into three stages.The computing tasks are reasonably allocated to different data processing units(i.e.,satellites)in each stage.The method effectively saves computing and storage resources of satellites,improves the utilization rate of a single satellite,and shortens the data processing time.Gaofen-3(GF-3)satellite SAR raw data is processed by the system,with the performance of the method verified.
基金supported by the National Key Research and Development Program of China(2023YFB3907202)the Natural Science Foundation of Hunan Province for Excellent Young Scholars(2025JJ40036)+2 种基金the Shandong Provincial Natural Science Foundation General Project(ZR2025MS565)the Changsha Municipal Distinguished Young Scientists and Technologists Program(kq2506001)the Fundamental Research Funds for the Central Universities(3072025ZN2501).
文摘To mitigate the masking of weak target echoes by cumulative reverberation in continuous active sonar(CAS),and to achieve real-time reverberation suppression under the constraints of short detection windows,this paper proposes a sequential subband sparse filtering with QR decomposition(QR)updates method based on low-rank and sparse decomposition.By leveraging the inherent sequential nature of CAS subband outputs,a low-rank background model is constructed via incremental QR updates.This framework allows for the rapid extraction of sparse components from each subband,effectively separating steady-state reverberation,reverberation fluctuations,and target echoes.Validation using shallow-water experimental data demonstrates that the proposed method achieves rapid convergence with only a few subband inputs.It significantly reduces interference from reverberation fluctuations,maintains the structural continuity of targets under low signal-to-noise ratio conditions,and improves the detectability of weak echoes.The online separation framework ensures superior computational efficiency while enhancing system adaptability to complex reverberant environments.
基金supported by the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,Grant No.KFU250098.
文摘In this study,an automated multimodal system for detecting,classifying,and dating fruit was developed using a two-stage YOLOv11 pipeline.In the first stage,the YOLOv11 detection model locates individual date fruits in real time by drawing bounding boxes around them.These bounding boxes are subsequently passed to a YOLOv11 classification model,which analyzes cropped images and assigns class labels.An additional counting module automatically tallies the detected fruits,offering a near-instantaneous estimation of quantity.The experimental results suggest high precision and recall for detection,high classification accuracy(across 15 classes),and near-perfect counting in real time.This paper presents a multi-stage pipeline for date fruit detection,classification,and automated counting,employing YOLOv11-based models to achieve high accuracy while maintaining real-time throughput.The results demonstrated that the detection precision exceeded 90%,the classification accuracy approached 92%,and the counting module correlated closely with the manual tallies.These findings confirm the potential of reducing manual labour and enhancing operational efficiency in post-harvesting processes.Future studies will include dataset expansion,user-centric interfaces,and integration with harvesting robotics.
基金supported from the Strategic Pioneer Program of the Astronomy Large-Scale Scientific FacilityChinese Academy of Sciences and the Science and Education Integration Funding of University of Chinese Academy of Sciences+9 种基金the supports from the National Key Basic R&D Program of China via 2023YFA1608303the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0550103)the supports from the Strategic Priority Research Program of the Chinese Academy of Sciences under grant No.XDB0550000the National Natural Science Foundation of China(NSFC,grant Nos.12422303 and12261141690)the supports from the NSFC(grant No.12403024)supports from the NSFC through grant Nos.11988101 and 11933004the Postdoctoral Fellowship Program of CPSF under grant No.GZB20240731the Young Data Scientist Project of the National Astronomical Data Centerthe China Post-doctoral Science Foundation(No.2023M743447)supports from the New Cornerstone Science Foundation through the New Cornerstone Investigator Program and the XPLORER PRIZE。
文摘This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert triggering and light curve generation for transient sources.By applying the STRIP pipeline to both simulated and real observational data of the Mini-Si Tian survey,it successfully identified various types of variable sources,including stellar flares,supernovae,variable stars,and asteroids,while meeting requirements of reduction speed within 5 minutes.For the real observational data set,the pipeline detected one flare event,127 variable stars,and14 asteroids from three monitored sky regions.Additionally,two data sets were generated:one,a real-bogus training data set comprising 218,818 training samples,and the other,a variable star light curve data set with 421instances.These data sets will be used to train machine learning algorithms,which are planned for future integration into STRIP.
基金National Natural Science Foundation of China(No.61302159,61227003,61301259)Natual Science Foundation of Shanxi Province(No.2012021011-2)+2 种基金Specialized Research Fund for the Doctoral Program of Higher Education,China(No.20121420110006)Top Science and Technology Innovation Teams of Higher Learning Institutions of Shanxi Province,ChinaProject Sponsored by Scientific Research for the Returned Overseas Chinese Scholars,Shanxi Province(No.2013-083)
文摘Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction （HCI）-friendly in- terface based on VC ＋＋ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
基金supported by the National Institute of Health(R37CA240806,U01CA288351,and R50CA283816)support from UCI Chao Family Comprehensive Cancer Center(P30CA062203).
文摘Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金supported by the National Natural Science Foundation of China 62402171.
文摘As a fundamental component in computer vision,edges can be categorized into four types based on discontinuities in reflectance,illumination,surface normal,or depth.While deep CNNs have significantly advanced generic edge detection,real-time multi-class semantic edge detection under resource constraints remains challenging.To address this,we propose a lightweight framework based on PiDiNet that enables fine-grained semantic edge detection.Our model simultaneously predicts background and four edge categories from full-resolution inputs,balancing accuracy and efficiency.Key contributions include:a multi-channel output structure expanding binary edge prediction to five classes,supported by a deep supervision mechanism;a dynamic class-balancing strategy combining adaptive weighting with physical priors to handle extreme class imbalance;and maintained architectural efficiency enabling real-time inference.Extensive evaluations on BSDS-RIND show our approach achieves accuracy competitive with state-of-the-art methods while operating in real time.
基金Supported by the National Program on Key Basic Research Project(2020YFA0713600)the National Natural Science Foundation of China(62272214)。
文摘In the era of the Internet of Things,distributed computing alleviates the problem of insufficient terminal computing power by integrating idle resources of heterogeneous devices.However,the imbalance between task execution delay and node energy consumption,and the scheduling and adaptation challenges brought about by device heterogeneity,urgently need to be addressed.To tackle this problem,this paper constructs a multi-objective real-time task scheduling model that considers task real-time performance,execution delay,system energy consumption,and node interests.The model aims to minimize the delay upper bound and total energy consumption while maximizing system satisfaction.A real-time task scheduling algorithm based on bilateral matching game is proposed.By designing a bidirectional preference mechanism between tasks and computing nodes,combined with a multi-round stable matching strategy,accurate matching between tasks and nodes is achieved.Simulation results show that compared with the baseline scheme,the proposed algorithm significantly reduces the total execution cost,effectively balances the task execution delay and the energy consumption of compute nodes,and takes into account the interests of each network compute node.
基金National Natural Science Foundation of China,Grant/Award Number:52104120Hunan Provincial Key Laboratory of Key Technology on Hydropower Development,Grant/Award Number:PKLHD202303。
文摘During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study investigates the coupled thermo-mechanical behavior of granite during heating and cooling through a combination of laboratory tests and finite difference method analysis.Initial investigations involve X-ray diffraction,thermal expansion test,thermogravimetric analysis,and uniaxial compression test.Results show the significant variations of granite properties under different thermal conditions,attributed to temperature gradients,water evaporation,and mineral phase transitions.Subsequently,a model considering temperature-dependent parameters and real-time cooling rates was employed to simulate linear heating and nonlinear cooling processes.Simulation results indicate that the thermal cracking predominantly occurs during the heating stage,with tensile failure as the primary mode.Additionally,a faster real-time cooling rate at higher temperatures intensifies the thermal cracking behavior in granite.This study effectively elucidates the thermomechanical coupling behavior of granite during heating and cooling processes,providing insights into the mechanisms of mechanical property changes with rising or decreasing temperatures.
基金supported by Jiangxi Polytechnic Institute Key Research Topics in Educational Reform 2025-JGJG-07.
文摘The intelligent environmental sensing systems are quickly transforming the sparse and retrospective monitoring to dense and decision-oriented environmental intelligence.This review brings together the manner in which integration of Internet of Things(IoT)sensing,edge computing,and real-time analytics facilitates timely detection,interpretation,and prediction of the environmental conditions across the applications,such as urban air quality,watershed and coastal surveillance,industrial safety,agriculture,and disaster response.We define end-to-end architectural patterns to organize devices,edge nodes,and cloud services to satisfy latency,reliability,bandwidth,and governance constraints with emphasis on event-time processing,adaptive offloading,and hierarchical aggregation.Then we look at sensing and infrastructure foundations,emphasizing the effects of sensor modality and power autonomy,connectivity,and the practices of calibration on the practicable analytics and eventual plausibility.It is on this basis that we examine real-time analytics pipelines and Artificial Intelligence(AI)techniques to preprocess,sensor combine,anomaly detect,and short-horizon forecast,with a focus on edge-deployable models,quantification of uncertainties,and query resistance to drift and domain shift.Lastly,we address the realities of deployment that condition operational success,such as lifecycle engineering,provenance-aware data management,security and privacy risks,ethical governance,and evaluation methodologies,which place end-to-end latency and field generalization as a priority.This review offers cohesion to algorithmic capabilities and systems engineering and governance to define an overall framework,show open areas of research directions,and provide practical recommendations on how to design trustworthy,scalable,and sustainable environmental monitoring systems.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
基金supported by the National Natural Science Foundation of China(Grant No.42077244)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0434).
文摘To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
基金supported by the National Key Research and Development Program of ChinaNational Natural Science Foundation of China(NSFC)Jilin Province Science and Technology Development Plan Project under Grants 2020YFA0715000,62075081,and 20220402011GH。
文摘Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.
文摘Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.
基金supported by the National Natural Science Foundation of China(Grant No.62403486)。
文摘The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.
