In order to support the physical research on the EAST tokamak,a new positive ion source with designed beam energy of 120 keV was proposed to be developed.Accelerator structure is one of the key components of the ion s...In order to support the physical research on the EAST tokamak,a new positive ion source with designed beam energy of 120 keV was proposed to be developed.Accelerator structure is one of the key components of the ion source.Through the finite element analysis method,the electrostatic analyses of insulators and grid plates were carried out,the material and structure parameters of insulators were determined.The maximum electric field around each insulator is about 4 kV/mm,and the maximum electric field between grids is about 14 kV/mm,which can meet the 120 keV withstand voltage holding.The insulation system for the positive ion source accelerator with 120 keV is designed,and the connection and basic parameters of insulators and support flanges are analyzed and determined.展开更多
Graph computing has become pervasive in many applications due to its capacity to represent complex relationships among different objects in the big data era.However,general-purpose architectures are computationally in...Graph computing has become pervasive in many applications due to its capacity to represent complex relationships among different objects in the big data era.However,general-purpose architectures are computationally inefficient for graph algorithms,and dedicated architectures can provide high efficiency,but lack flexibility.To address these challenges,this paper proposes ParaGraph,a reduced instruction set computing-five(RISC-V)-based software-hardware co-designed graph computing accelerator that can process graph algorithms in parallel,and also establishes a performance evaluation model to assess the efficiency of co-acceleration.ParaGraph handles parallel processing of typical graph algorithms on the hardware side,while performing overall functional control on the software side with custom designed instructions.ParaGraph is verified on the XCVU440 field-programmable gate array(FPGA)board with E203,a RISC-V processor.Compared with current mainstream graph computing accelerators,ParaGraph consumes 7.94%less block RAM(BRAM)resources than ThunderGP.Its power consumption is reduced by 86.90%,24.90%,and 76.38%compared with ThunderGP,HitGraph,and GraphS,respectively.The power efficiency of connected components(CC)and degree centrality(DC)algorithms is improved by an average of 6.50 times over ThunderGP,2.51 times over HitGraph,and 3.99 times over GraphS.The software-hardware co-design acceleration performance indicators H/W.Cap for CC and DC are 13.02 and 14.02,respectively.展开更多
Aqueous zincion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion migration.To address this,a strategy has been d...Aqueous zincion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion migration.To address this,a strategy has been developed to create a cation-accelerating electric field on the surface of the cathode to achieve ultrafast Zn^(2+)diffusion kinetics.By employing electrodeposition to coat MoS_(2)on the surface of BaV_(6)O_(16)·3H_(2)O nanowires,the directional builtin electric field generated at the heterointerface acts as a cation accelerator,continuously accelerating Zn^(2+)diffusion into the active material.The optimized Zn^(2+)diffusion coefficient in CC@BaV-V_(6)O_(16)·3H_(2)@MoS_(2)(7.5×10^(8)cm^(2)s^(-1)) surpasses that of most reported V-based cathodes.Simultaneously,MoS_(2)serving as a cathodic armor extends the cycling life of the Zn-CC@BaV_(6)O_(16)·3H_(2)@MoS_(2)full batteries to over 10000 cycles.This work provides valuable insights into optimizing ion diffusion kinetics for high-performance energy storage devices.展开更多
A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear acce...A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear accelerator.The main components include a thermionic DC electron gun,an RF linear accelerator,a beam diagnostic chamber,and a beam exit window for electron beam irradiation.Therefore,reengineering must be performed based on the characteristics of the electron beam and its dynamics throughout the system.In this study,the electron beam current density emitted from the cathode was calculated based on the thermionic emission theory,and the result was used to produce the electron beam distribution in the gun using CST Studio Suite^(■)software.The properties of the electron beam and its acceleration in the linear accelerator and downstream diagnostic section were studied using the ASTRA electron beam dynamics simulation code,with the aim of producing an electron beam with an average energy of 4 MeV at the linear accelerator exit.The transverse beam profile and electron deposition dose in the ambient environment were calculated using Geant4 Monte Carlo simulation software to estimate the beam performance for the irradiation experiments.The parameters studied can be used as guidelines for machine operation and future experimental plans.展开更多
Heavy-ion collisions are powerful tools for studying hypernuclear physics.We develop a dynamical coalescence model coupled with an ART model(version1.0) to study the production rates of light nuclear clusters and hype...Heavy-ion collisions are powerful tools for studying hypernuclear physics.We develop a dynamical coalescence model coupled with an ART model(version1.0) to study the production rates of light nuclear clusters and hypernuclei in heavy-ion reactions,for instance,the deuteron(d),triton(t),helium(~3He),and hypertriton(_A^3H)in minimum bias(0-80%centrality)~6Li+^(12)C reactions at beam energy of 3.5A GeV.The penalty factor for light clusters is extracted from the yields,and the distributions of 0 angle of particles,which provide direct suggesetions about the location of particle detectors in the near future facility-High Intensity heavy-ion Accelerator Facility(HIAF) are investigated.Our calculation demonstrates that HIAF is suitable for studying hypernuclear physics.展开更多
How to operate^(82)Sr/^(82)Rb and ^(68)Ge/^(68)Ga generators used in the positron emission tomography scan process is explained, and the importance of ^(82)Sr and ^(68)Ge radionuclides for these generators is revealed...How to operate^(82)Sr/^(82)Rb and ^(68)Ge/^(68)Ga generators used in the positron emission tomography scan process is explained, and the importance of ^(82)Sr and ^(68)Ge radionuclides for these generators is revealed. To produce medical ^(82)Sr and ^(68)Ge by means of a proton accelerator in an irradiation time of 24 h, a proton beam current of250 l A, and an energy range E_(proton)= 100 →5 MeV, the cross sections and the neutron emission spectrum curves of(p,xn) reaction processes on Rb-85, Ga-69 and Ga-71 targets were calculated, and the activities and yields of the product were simulated for the reaction processes. Additionally, the integral yields of the reaction processes were determined via the calculated cross-sectional curves and the mass stopping power obtained from the X-PMSP program. Furthermore, based on the obtained results, the appropriate reaction processes for the production of ^(82)Sr and ^(68)Ge isotopes on Rb-85, Ga-69, and Ga-71 targets are discussed.展开更多
A novel TU derivative, N-phenyl-N＇-（γ-triethoxysilane）-propyl thiourea （STU）, is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time ...A novel TU derivative, N-phenyl-N＇-（γ-triethoxysilane）-propyl thiourea （STU）, is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time of NR compounds with STU is the shortest, indicating a more nucleophilic reaction occurs. The Py-GC/MS results present that the phenyl iso- thiocyanate fragment still remains in the NPUSTU compounds with or without extracting treatment, but no silane segment can be found in the vulcanizate with extracting treatment. Vibrations of C=S, NH and aromatic ring in FTIR experiments and a new methyne carbon peak, as well as the peaks of phenyl group of STU, in the solid state 13C-NMR experiments are found in the NR/STU vulcanizate with extracting treatment. Moreover, the crosslinking density of vulcanizates with STU evolves to lower level, indicating the sulfur atom of STU does not contribute to the sulfur crosslinking. Therefore, a new vulcanization kinetic mechanism of STU is propounded that the thiourea groups can graft to the rubber main chains as pendant groups by chemical bonds during the vulcanization process, which is in accordance with the experimental observations quite well.展开更多
Recently,due to the availability of big data and the rapid growth of computing power,artificial intelligence(AI)has regained tremendous attention and investment.Machine learning(ML)approaches have been successfully ap...Recently,due to the availability of big data and the rapid growth of computing power,artificial intelligence(AI)has regained tremendous attention and investment.Machine learning(ML)approaches have been successfully applied to solve many problems in academia and in industry.Although the explosion of big data applications is driving the development of ML,it also imposes severe challenges of data processing speed and scalability on conventional computer systems.Computing platforms that are dedicatedly designed for AI applications have been considered,ranging from a complement to von Neumann platforms to a“must-have”and stand-alone technical solution.These platforms,which belong to a larger category named“domain-specific computing,”focus on specific customization for AI.In this article,we focus on summarizing the recent advances in accelerator designs for deep neural networks(DNNs)-that is,DNN accelerators.We discuss various architectures that support DNN executions in terms of computing units,dataflow optimization,targeted network topologies,architectures on emerging technologies,and accelerators for emerging applications.We also provide our visions on the future trend of AI chip designs.展开更多
Large accelerator facilities require clocks and triggers with high accuracy to synchronize equipment and devices. A new femtosecond timing system was designed to meet the demands of new facilities. In this system, the...Large accelerator facilities require clocks and triggers with high accuracy to synchronize equipment and devices. A new femtosecond timing system was designed to meet the demands of new facilities. In this system, the radio-frequency signal is modulated in a continuous-wave laser carrier with frequency stabilization, and timing events are distributed in the same fiber. The phase drift is detected precisely, based on the principle of the Michelson interferometer. The phase drift is compensated with coarse and fine correctors afterward. We aim to realize the stable transmission of the RF signal and timing events for a long distance and duration, with the phase drift and additive jitter in femtoseconds. After the extension, the system will become a complete solution for the clock-and-trigger distribution of synchrotron radiation facilities, free-electron lasers, and other accelerators. The physics design, simulation analysis, and preliminary results are included in the paper.展开更多
Using high energy accelerators for energy production by nuclear fission goes back to the 1950's with plans for“breeder accelerators”as well as with early ideas on subcritical reactors,which are currently pursued...Using high energy accelerators for energy production by nuclear fission goes back to the 1950's with plans for“breeder accelerators”as well as with early ideas on subcritical reactors,which are currently pursued in China and other countries.Also,fusion came in,when the idea emerged in the mid 1970's to use accelerators and their highly time and space compressed beams in order to generate the extremely high density and temperatures required for inertial fusion energy production.Due to the higher repetition rates and efficiencies of accelerators,this was seen as a promising alternative to using high power lasers.After an introduction to nuclear fission applications of accelerators,this review summarizes some of the scientific developments directed towards this challenging application e with focus on the European HIDIF-study-and outlines parameters of future high energy density experiments after construction of the FAIR/Germany and HIAF/China heavy ion accelerator projects.展开更多
A novel crystal nucleus-based cement-hardening accelerator was evaluated using various mortar and segment concrete experiments.The mechanism of hardening acceleration was investigated via hydration temperature variati...A novel crystal nucleus-based cement-hardening accelerator was evaluated using various mortar and segment concrete experiments.The mechanism of hardening acceleration was investigated via hydration temperature variation analysis,hydration degree analysis,X-ray diffraction(XRD)and scanning electron microscopy(SEM).In the presence of accelerator,the fluidity loss of mortar was increased after 30 minuites,and a coagulation was also observed.Moreover,based on the image of SEM,the formation of C-S-H gels was enhanced in the early hydration.As a result,the hardening accelerator could significantly boost the early strength of concrete,especially within one day of pouring,and shorten steam curing time to meet the demolding strength.展开更多
Laser wakefield accelerators（LWFAs） are compact accelerators which can produce femtosecond high-energy electron beams on a much smaller scale than the conventional radiofrequency accelerators. It is attributed to th...Laser wakefield accelerators（LWFAs） are compact accelerators which can produce femtosecond high-energy electron beams on a much smaller scale than the conventional radiofrequency accelerators. It is attributed to their high acceleration gradient which is about 3 orders of magnitude larger than the traditional ones. The past decade has witnessed the major breakthroughs and progress in developing the laser wakfield accelerators. To achieve the LWFAs suitable for applications,more and more attention has been paid to optimize the LWFAs for high-quality electron beams. A single-staged LWFA does not favor generating controllable electron beams beyond 1 Ge V since electron injection and acceleration are coupled and cannot be independently controlled. Staged LWFAs provide a promising route to overcome this disadvantage by decoupling injection from acceleration and thus the electron-beam quality as well as the stability can be greatly improved.This paper provides an overview of the physical conceptions of the LWFA, as well as the major breakthroughs and progress in developing LWFAs from single-stage to two-stage LWFAs.展开更多
In this paper,an improved discharging circuit was proposed to quicken the decay of the current in the drive coil in a reluctance accelerator when the armature reaches the center of the coil.The aim of this is to preve...In this paper,an improved discharging circuit was proposed to quicken the decay of the current in the drive coil in a reluctance accelerator when the armature reaches the center of the coil.The aim of this is to prevent the suck-back effect caused by the residual current in drive coil.The method is adding a reverse charging branch with a small capacitor in the traditional pulsed discharging circuit.The results under the traditional circuit and the improved circuit were compared in a simulation.The experiment then verified the simulations and they had good agreement.Simulation and experiment both demonstrated the improved circuit can effectively prevent the suck-back effect and increase the efficiency.At the voltage of 800 V,an efficiency increase of 36.34% was obtained.展开更多
Developing sulfur cathodes with high catalytic activity on accelerating the sluggish redox kinetics of lithium polysulfides(Li PSs) and unveiling their mechanisms are pivotal for advanced lithium–sulfur(Li–S)batteri...Developing sulfur cathodes with high catalytic activity on accelerating the sluggish redox kinetics of lithium polysulfides(Li PSs) and unveiling their mechanisms are pivotal for advanced lithium–sulfur(Li–S)batteries. Herein, MoS2 is verified to reduce the Gibbs free energy for rate-limiting step of sulfur reduction and the dissociation energy of lithium sulfide(Li2 S) for the first time employing theoretical calculations. The Mo S2 nanosheets coated on mesoporous hollow carbon spheres(MHCS) are then reasonably designed as a sulfur host for high-capacity and long-life Li–S battery, in which MHCS can guarantee the high sulfur loading and fast electron/ion transfer. It is revealed that the shuttle effect is efficiently inhibited because of the boosted conversion of Li PSs. As a result, the coin cell based on the MHCS@Mo S2-S cathode exhibits stable cycling performance maintaining 735.7 mAh g^(-1) after 500 cycles at 1.0 C. More importantly, the pouch cell employing the MHCS@Mo S2-S cathodes achieves high specific capacity of1353.2 m Ah g^(-1) and prominent cycle stability that remaining 960.0 m Ah g^(-1) with extraordinary capacity retention of 79.8% at 0.1 C after 170 cycles. Therefore, this work paves a new avenue for developing practical high specific energy and long-life pouch-type Li–S batteries.展开更多
A compact interdigital H-mode drift-tube linac (IH-DTL) with the alternating-phase-focusing (APF) method, working at 325 MHz was designed for an injector of a proton medical accelerator. When fed in with a proper RF (...A compact interdigital H-mode drift-tube linac (IH-DTL) with the alternating-phase-focusing (APF) method, working at 325 MHz was designed for an injector of a proton medical accelerator. When fed in with a proper RF (radio frequency) power, the DTL cavity could establish the corresponding electromagnetic field to accelerate the ‘‘proton bunches’’ from an input energy of 3 MeV to an output energy of 7 MeV successfully, without any additional radial focusing elements. The gap-voltage distribution which was obtained from the CST■ Microwave Studio software simulations of the axial electric field was compared with that from the beam dynamics, and the errors met the requirements within ± 5%. In this paper, the RF design procedure and key results of the APF IH-DTL, which include the main RF characteristics of the cavity, frequency sensitivities of the tuners, and coupling factor of the RF power input coupler are presented.展开更多
An intense laser pulse focused onto a plasma can excite nonlinear plasma waves.Under appropriate conditions,electrons from the background plasma are trapped in the plasma wave and accelerated to ultra-relativistic vel...An intense laser pulse focused onto a plasma can excite nonlinear plasma waves.Under appropriate conditions,electrons from the background plasma are trapped in the plasma wave and accelerated to ultra-relativistic velocities.This scheme is called a laser wakefield accelerator.In this work,we present results from a laser wakefield acceleration experiment using a petawatt-class laser to excite the wakefields as well as nanoparticles to assist the injection of electrons into the accelerating phase of the wakefields.We find that a 10-cm-long,nanoparticle-assisted laser wakefield accelerator can generate 340 pC,10±1.86 GeV electron bunches with a 3.4 GeV rms convolved energy spread and a 0.9 mrad rms divergence.It can also produce bunches with lower energies in the 4–6 GeV range.展开更多
In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethyla...In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.展开更多
An automatic control system for the electrostatic accelerator has been developed by adopting the PLC （Programmable Logic Controller） control technique, infrared and optical-fibre transmission technique and network c...An automatic control system for the electrostatic accelerator has been developed by adopting the PLC （Programmable Logic Controller） control technique, infrared and optical-fibre transmission technique and network communication with the purpose to improve the intelligence level of the accelerator and to enhance the ability of monitoring, collecting and recording parameters. In view of the control system＇ structure, some anti-interference measures have been adopted after analyzing the interference sources. The measures in hardware include controlling the position of the corona needle, using surge arresters, shielding, ground connection and stabilizing the voltage. The measures in terms of software involve inter-blocking protection, soft-spacing, time delay, and diagnostic and protective programs. The electromagnetic compatible ability of the control system has thus been effectively improved.展开更多
Magnetohydrodynamic （MHD） accelerator is proposed as a next generation propulsion system. It can be used to increase the performance of a propulsion system. The objective of this study is to investigate the performa...Magnetohydrodynamic （MHD） accelerator is proposed as a next generation propulsion system. It can be used to increase the performance of a propulsion system. The objective of this study is to investigate the performance of MHD accelerator using non-equilibrium air plasma as working gas. In this study, the fundamental performance of MHD accelerator such as flow performance and electrical performance is evaluated at different levels of applied magnetic field using I-D numerical simulation. The numerical simulation is developed based on a set of differential equations with MHD approximation. To solve this set of differential equations the MacCormack scheme is used. A specified channel designed and developed at NASA Marshall Space Flight Centre is used in the numerical simulation. The composition of the simulated air plasma consists of seven species, namely, N2, N, O2, O, NO, NO＋, and e-. The performance of the non-equilibrium MHD accelerator is also compared with the equilibrium MHD accelerator.展开更多
Motive of the study is to present quantitative and qualitative analysis and comparison of beam data measurement with FF (flattening filter) and FFF (flattening filter free) beam in a Varian TrueBeam<sup>TM</s...Motive of the study is to present quantitative and qualitative analysis and comparison of beam data measurement with FF (flattening filter) and FFF (flattening filter free) beam in a Varian TrueBeam<sup>TM</sup> Medical Linear Accelerator. Critique of beam characterization and evolution of dosimetric properties for 6 MV, 10 MV, 15 MV FF beam and 6 MVFFF, 10 MVFFF FFF beam has been carried out. We performed the comparison of photon beam data for two standard FF photon energy 6 MV, 10 MV verses 6 MVFFF, and 10 MVFFF FFF beam. Determination and comparison of parameter involved PDD (Percentage depth dose), Depth dose profile, Symmetry, Flatness, Quality index, Relative output factor, Penumbra, Transmission factor, DLG (Dosimetric leaf gap), in addition to degree of Un-flatness and off-axis ratio of FFF beam. Outcomes of presenting study had shown that change of various parameters such as Percentage depth dose curves, Shape of the depth dose profile, Transmission, Value of quality index and significant rise in surface dose for FFF in comparison with FF beam. Differences in the output factor at lower and higher field sizes for FFF beam compared to that of FF beam were found. The maximum output factor deviation between 6 MV and 6 MVFFF was found to be 4.55%, whereas in 10 MV and 10 MVFFF was 5.71%. Beam quality TPR20/10 for FFF beam was found to be lesser in magnitude, 5.42% for 6 MVFFF whereas 4.50% for 10 MVFFF compared to 6 MV and 10 MV FF beam respectively. Jaw transmission and interleaf leakage for FFF beam were found to be lesser than FF beam. Also DLG for FFF beam was found to be lesser in magnitude comparable to that of flattened beam. This study is mainly inclined towards evaluation and comparison of the FF and FFF beam. It has been observed that, the outcome of a commissioning beam data generation fully complies with vendor specification and published literature.展开更多
基金supported by National Natural Science Foundation of China(No.11975261)。
文摘In order to support the physical research on the EAST tokamak,a new positive ion source with designed beam energy of 120 keV was proposed to be developed.Accelerator structure is one of the key components of the ion source.Through the finite element analysis method,the electrostatic analyses of insulators and grid plates were carried out,the material and structure parameters of insulators were determined.The maximum electric field around each insulator is about 4 kV/mm,and the maximum electric field between grids is about 14 kV/mm,which can meet the 120 keV withstand voltage holding.The insulation system for the positive ion source accelerator with 120 keV is designed,and the connection and basic parameters of insulators and support flanges are analyzed and determined.
基金Supported by the National Key R&D Program of China(No.2022ZD0119001)the National Natural Science Foundation of China(No.61834005)+1 种基金the Shaanxi Province Key R&D Plan(No.2022GY-027,2021GY-029)the Key Scientific Research Project of Shaanxi Department of Education(No.22JY060).
文摘Graph computing has become pervasive in many applications due to its capacity to represent complex relationships among different objects in the big data era.However,general-purpose architectures are computationally inefficient for graph algorithms,and dedicated architectures can provide high efficiency,but lack flexibility.To address these challenges,this paper proposes ParaGraph,a reduced instruction set computing-five(RISC-V)-based software-hardware co-designed graph computing accelerator that can process graph algorithms in parallel,and also establishes a performance evaluation model to assess the efficiency of co-acceleration.ParaGraph handles parallel processing of typical graph algorithms on the hardware side,while performing overall functional control on the software side with custom designed instructions.ParaGraph is verified on the XCVU440 field-programmable gate array(FPGA)board with E203,a RISC-V processor.Compared with current mainstream graph computing accelerators,ParaGraph consumes 7.94%less block RAM(BRAM)resources than ThunderGP.Its power consumption is reduced by 86.90%,24.90%,and 76.38%compared with ThunderGP,HitGraph,and GraphS,respectively.The power efficiency of connected components(CC)and degree centrality(DC)algorithms is improved by an average of 6.50 times over ThunderGP,2.51 times over HitGraph,and 3.99 times over GraphS.The software-hardware co-design acceleration performance indicators H/W.Cap for CC and DC are 13.02 and 14.02,respectively.
基金National Natural Science Foundation of China (61761047 and 41876055)Program for Innovative Research Team (in Science and Technology) in University of Yunnan Province。
文摘Aqueous zincion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion migration.To address this,a strategy has been developed to create a cation-accelerating electric field on the surface of the cathode to achieve ultrafast Zn^(2+)diffusion kinetics.By employing electrodeposition to coat MoS_(2)on the surface of BaV_(6)O_(16)·3H_(2)O nanowires,the directional builtin electric field generated at the heterointerface acts as a cation accelerator,continuously accelerating Zn^(2+)diffusion into the active material.The optimized Zn^(2+)diffusion coefficient in CC@BaV-V_(6)O_(16)·3H_(2)@MoS_(2)(7.5×10^(8)cm^(2)s^(-1)) surpasses that of most reported V-based cathodes.Simultaneously,MoS_(2)serving as a cathodic armor extends the cycling life of the Zn-CC@BaV_(6)O_(16)·3H_(2)@MoS_(2)full batteries to over 10000 cycles.This work provides valuable insights into optimizing ion diffusion kinetics for high-performance energy storage devices.
基金supported by Chiang Mai University for providing infrastructure and the NSRF via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation[grant number B05F650022]for the software CST Studio Suite^(■)2023Financial support for the reengineering and commissioning of the accelerator system was provided by the Thailand Center of Excellence in Physics(ThEP Center),Science and Technology Park Chiang Mai University(CMU STeP)。
文摘A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear accelerator.The main components include a thermionic DC electron gun,an RF linear accelerator,a beam diagnostic chamber,and a beam exit window for electron beam irradiation.Therefore,reengineering must be performed based on the characteristics of the electron beam and its dynamics throughout the system.In this study,the electron beam current density emitted from the cathode was calculated based on the thermionic emission theory,and the result was used to produce the electron beam distribution in the gun using CST Studio Suite^(■)software.The properties of the electron beam and its acceleration in the linear accelerator and downstream diagnostic section were studied using the ASTRA electron beam dynamics simulation code,with the aim of producing an electron beam with an average energy of 4 MeV at the linear accelerator exit.The transverse beam profile and electron deposition dose in the ambient environment were calculated using Geant4 Monte Carlo simulation software to estimate the beam performance for the irradiation experiments.The parameters studied can be used as guidelines for machine operation and future experimental plans.
基金supported in part by the Major State Basic Research Development Program in China(Nos.2014CB845401 and2015CB856904)the National Natural Science Foundation of China(Nos.11421505,11520101004,11275250,11322547 and U1232206)Key Program of CAS for the Frontier Science(No.QYZDJ-SSW-SLH002)
文摘Heavy-ion collisions are powerful tools for studying hypernuclear physics.We develop a dynamical coalescence model coupled with an ART model(version1.0) to study the production rates of light nuclear clusters and hypernuclei in heavy-ion reactions,for instance,the deuteron(d),triton(t),helium(~3He),and hypertriton(_A^3H)in minimum bias(0-80%centrality)~6Li+^(12)C reactions at beam energy of 3.5A GeV.The penalty factor for light clusters is extracted from the yields,and the distributions of 0 angle of particles,which provide direct suggesetions about the location of particle detectors in the near future facility-High Intensity heavy-ion Accelerator Facility(HIAF) are investigated.Our calculation demonstrates that HIAF is suitable for studying hypernuclear physics.
文摘How to operate^(82)Sr/^(82)Rb and ^(68)Ge/^(68)Ga generators used in the positron emission tomography scan process is explained, and the importance of ^(82)Sr and ^(68)Ge radionuclides for these generators is revealed. To produce medical ^(82)Sr and ^(68)Ge by means of a proton accelerator in an irradiation time of 24 h, a proton beam current of250 l A, and an energy range E_(proton)= 100 →5 MeV, the cross sections and the neutron emission spectrum curves of(p,xn) reaction processes on Rb-85, Ga-69 and Ga-71 targets were calculated, and the activities and yields of the product were simulated for the reaction processes. Additionally, the integral yields of the reaction processes were determined via the calculated cross-sectional curves and the mass stopping power obtained from the X-PMSP program. Furthermore, based on the obtained results, the appropriate reaction processes for the production of ^(82)Sr and ^(68)Ge isotopes on Rb-85, Ga-69, and Ga-71 targets are discussed.
基金financially supported by the National Natural Science Foundation of China(Nos.51003031 and 51303026)Science Foundation for Universities and Institutions of Dongguan City(No.2012108102008)the Research Fund for the Doctoral Program of Dongguan University of Technology(No.ZJ121002)
文摘A novel TU derivative, N-phenyl-N＇-（γ-triethoxysilane）-propyl thiourea （STU）, is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time of NR compounds with STU is the shortest, indicating a more nucleophilic reaction occurs. The Py-GC/MS results present that the phenyl iso- thiocyanate fragment still remains in the NPUSTU compounds with or without extracting treatment, but no silane segment can be found in the vulcanizate with extracting treatment. Vibrations of C=S, NH and aromatic ring in FTIR experiments and a new methyne carbon peak, as well as the peaks of phenyl group of STU, in the solid state 13C-NMR experiments are found in the NR/STU vulcanizate with extracting treatment. Moreover, the crosslinking density of vulcanizates with STU evolves to lower level, indicating the sulfur atom of STU does not contribute to the sulfur crosslinking. Therefore, a new vulcanization kinetic mechanism of STU is propounded that the thiourea groups can graft to the rubber main chains as pendant groups by chemical bonds during the vulcanization process, which is in accordance with the experimental observations quite well.
基金the National Science Foundations(NSFs)(1822085,1725456,1816833,1500848,1719160,and 1725447)the NSF Computing and Communication Foundations(1740352)+1 种基金the Nanoelectronics COmputing REsearch Program in the Semiconductor Research Corporation(NC-2766-A)the Center for Research in Intelligent Storage and Processing-in-Memory,one of six centers in the Joint University Microelectronics Program,a SRC program sponsored by Defense Advanced Research Projects Agency.
文摘Recently,due to the availability of big data and the rapid growth of computing power,artificial intelligence(AI)has regained tremendous attention and investment.Machine learning(ML)approaches have been successfully applied to solve many problems in academia and in industry.Although the explosion of big data applications is driving the development of ML,it also imposes severe challenges of data processing speed and scalability on conventional computer systems.Computing platforms that are dedicatedly designed for AI applications have been considered,ranging from a complement to von Neumann platforms to a“must-have”and stand-alone technical solution.These platforms,which belong to a larger category named“domain-specific computing,”focus on specific customization for AI.In this article,we focus on summarizing the recent advances in accelerator designs for deep neural networks(DNNs)-that is,DNN accelerators.We discuss various architectures that support DNN executions in terms of computing units,dataflow optimization,targeted network topologies,architectures on emerging technologies,and accelerators for emerging applications.We also provide our visions on the future trend of AI chip designs.
基金supported by the Youth Innovation Promotion Association CAS(No.2016238)the National Natural Science Foundation of China(No.11305246)
文摘Large accelerator facilities require clocks and triggers with high accuracy to synchronize equipment and devices. A new femtosecond timing system was designed to meet the demands of new facilities. In this system, the radio-frequency signal is modulated in a continuous-wave laser carrier with frequency stabilization, and timing events are distributed in the same fiber. The phase drift is detected precisely, based on the principle of the Michelson interferometer. The phase drift is compensated with coarse and fine correctors afterward. We aim to realize the stable transmission of the RF signal and timing events for a long distance and duration, with the phase drift and additive jitter in femtoseconds. After the extension, the system will become a complete solution for the clock-and-trigger distribution of synchrotron radiation facilities, free-electron lasers, and other accelerators. The physics design, simulation analysis, and preliminary results are included in the paper.
文摘Using high energy accelerators for energy production by nuclear fission goes back to the 1950's with plans for“breeder accelerators”as well as with early ideas on subcritical reactors,which are currently pursued in China and other countries.Also,fusion came in,when the idea emerged in the mid 1970's to use accelerators and their highly time and space compressed beams in order to generate the extremely high density and temperatures required for inertial fusion energy production.Due to the higher repetition rates and efficiencies of accelerators,this was seen as a promising alternative to using high power lasers.After an introduction to nuclear fission applications of accelerators,this review summarizes some of the scientific developments directed towards this challenging application e with focus on the European HIDIF-study-and outlines parameters of future high energy density experiments after construction of the FAIR/Germany and HIAF/China heavy ion accelerator projects.
基金Funded by Star Program(No.1804QB1403200)from Science and Technology Commission of Shanghai Municipality。
文摘A novel crystal nucleus-based cement-hardening accelerator was evaluated using various mortar and segment concrete experiments.The mechanism of hardening acceleration was investigated via hydration temperature variation analysis,hydration degree analysis,X-ray diffraction(XRD)and scanning electron microscopy(SEM).In the presence of accelerator,the fluidity loss of mortar was increased after 30 minuites,and a coagulation was also observed.Moreover,based on the image of SEM,the formation of C-S-H gels was enhanced in the early hydration.As a result,the hardening accelerator could significantly boost the early strength of concrete,especially within one day of pouring,and shorten steam curing time to meet the demolding strength.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11127901,11425418,and 61221064)the National Basic Research Program of China(Grant No.2011CB808100)the Science and Technology Talent Project of Shanghai City,China(Grant Nos.12XD1405200 and 12ZR1451700)
文摘Laser wakefield accelerators（LWFAs） are compact accelerators which can produce femtosecond high-energy electron beams on a much smaller scale than the conventional radiofrequency accelerators. It is attributed to their high acceleration gradient which is about 3 orders of magnitude larger than the traditional ones. The past decade has witnessed the major breakthroughs and progress in developing the laser wakfield accelerators. To achieve the LWFAs suitable for applications,more and more attention has been paid to optimize the LWFAs for high-quality electron beams. A single-staged LWFA does not favor generating controllable electron beams beyond 1 Ge V since electron injection and acceleration are coupled and cannot be independently controlled. Staged LWFAs provide a promising route to overcome this disadvantage by decoupling injection from acceleration and thus the electron-beam quality as well as the stability can be greatly improved.This paper provides an overview of the physical conceptions of the LWFA, as well as the major breakthroughs and progress in developing LWFAs from single-stage to two-stage LWFAs.
基金This work was supported by the Fundamental Research Funds for the Central Universities[Grant number 2019XJ01].
文摘In this paper,an improved discharging circuit was proposed to quicken the decay of the current in the drive coil in a reluctance accelerator when the armature reaches the center of the coil.The aim of this is to prevent the suck-back effect caused by the residual current in drive coil.The method is adding a reverse charging branch with a small capacitor in the traditional pulsed discharging circuit.The results under the traditional circuit and the improved circuit were compared in a simulation.The experiment then verified the simulations and they had good agreement.Simulation and experiment both demonstrated the improved circuit can effectively prevent the suck-back effect and increase the efficiency.At the voltage of 800 V,an efficiency increase of 36.34% was obtained.
基金supported by the funding from the Strategy Priority Research Program of Chinese Academy of Science (Grant No. XDA17020404)DICP&QIBEBT (DICP&QIBEBT UN201702)+8 种基金R&D Projects in Key Areas of Guangdong Province (2019B090908001)Science and Technology Innovation Foundation of Dalian (2018J11CY020)Defense Industrial Technology Development Program (JCKY2018130C107)National Natural Science Foundation of China (Grants 51872283)Liao Ning Revitalization Talents Program (Grant XLYC1807153)Natural Science Foundation of Liaoning Province (Grant 20180510038)DICP (DICP ZZBS201708, DICP ZZBS201802)DNL Cooperation FundCAS (DNL180310, DNL180308, DNL201912, and DNL201915)。
文摘Developing sulfur cathodes with high catalytic activity on accelerating the sluggish redox kinetics of lithium polysulfides(Li PSs) and unveiling their mechanisms are pivotal for advanced lithium–sulfur(Li–S)batteries. Herein, MoS2 is verified to reduce the Gibbs free energy for rate-limiting step of sulfur reduction and the dissociation energy of lithium sulfide(Li2 S) for the first time employing theoretical calculations. The Mo S2 nanosheets coated on mesoporous hollow carbon spheres(MHCS) are then reasonably designed as a sulfur host for high-capacity and long-life Li–S battery, in which MHCS can guarantee the high sulfur loading and fast electron/ion transfer. It is revealed that the shuttle effect is efficiently inhibited because of the boosted conversion of Li PSs. As a result, the coin cell based on the MHCS@Mo S2-S cathode exhibits stable cycling performance maintaining 735.7 mAh g^(-1) after 500 cycles at 1.0 C. More importantly, the pouch cell employing the MHCS@Mo S2-S cathodes achieves high specific capacity of1353.2 m Ah g^(-1) and prominent cycle stability that remaining 960.0 m Ah g^(-1) with extraordinary capacity retention of 79.8% at 0.1 C after 170 cycles. Therefore, this work paves a new avenue for developing practical high specific energy and long-life pouch-type Li–S batteries.
基金supported by the National Key Research and Development Program of China(No.2016YFC0105408)
文摘A compact interdigital H-mode drift-tube linac (IH-DTL) with the alternating-phase-focusing (APF) method, working at 325 MHz was designed for an injector of a proton medical accelerator. When fed in with a proper RF (radio frequency) power, the DTL cavity could establish the corresponding electromagnetic field to accelerate the ‘‘proton bunches’’ from an input energy of 3 MeV to an output energy of 7 MeV successfully, without any additional radial focusing elements. The gap-voltage distribution which was obtained from the CST■ Microwave Studio software simulations of the axial electric field was compared with that from the beam dynamics, and the errors met the requirements within ± 5%. In this paper, the RF design procedure and key results of the APF IH-DTL, which include the main RF characteristics of the cavity, frequency sensitivities of the tuners, and coupling factor of the RF power input coupler are presented.
基金supported by the Air Force Office of Scientific Research Grant No.FA9550-17-1-0264supported by the DOE,Office of Science,Fusion Energy Sciences under Contract No.DE-SC0021125+2 种基金supported by the U.S.Department of Energy Grant No.DESC0011617.D.A.Jarozynski,E.Brunetti,B.Ersfeld,and S.Yoffe would like to acknowledge support from the U.K.EPSRC(Grant Nos.EP/J018171/1 and EP/N028694/1)the European Union’s Horizon 2020 research and innovation program under Grant Agreement No.871124 Laserlab-Europe and EuPRAXIA(Grant No.653782)funded by the N8 research partnership and EPSRC(Grant No.EP/T022167/1).
文摘An intense laser pulse focused onto a plasma can excite nonlinear plasma waves.Under appropriate conditions,electrons from the background plasma are trapped in the plasma wave and accelerated to ultra-relativistic velocities.This scheme is called a laser wakefield accelerator.In this work,we present results from a laser wakefield acceleration experiment using a petawatt-class laser to excite the wakefields as well as nanoparticles to assist the injection of electrons into the accelerating phase of the wakefields.We find that a 10-cm-long,nanoparticle-assisted laser wakefield accelerator can generate 340 pC,10±1.86 GeV electron bunches with a 3.4 GeV rms convolved energy spread and a 0.9 mrad rms divergence.It can also produce bunches with lower energies in the 4–6 GeV range.
文摘In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.
基金the special fund of the Education Department of Henan Provice
文摘An automatic control system for the electrostatic accelerator has been developed by adopting the PLC （Programmable Logic Controller） control technique, infrared and optical-fibre transmission technique and network communication with the purpose to improve the intelligence level of the accelerator and to enhance the ability of monitoring, collecting and recording parameters. In view of the control system＇ structure, some anti-interference measures have been adopted after analyzing the interference sources. The measures in hardware include controlling the position of the corona needle, using surge arresters, shielding, ground connection and stabilizing the voltage. The measures in terms of software involve inter-blocking protection, soft-spacing, time delay, and diagnostic and protective programs. The electromagnetic compatible ability of the control system has thus been effectively improved.
文摘Magnetohydrodynamic （MHD） accelerator is proposed as a next generation propulsion system. It can be used to increase the performance of a propulsion system. The objective of this study is to investigate the performance of MHD accelerator using non-equilibrium air plasma as working gas. In this study, the fundamental performance of MHD accelerator such as flow performance and electrical performance is evaluated at different levels of applied magnetic field using I-D numerical simulation. The numerical simulation is developed based on a set of differential equations with MHD approximation. To solve this set of differential equations the MacCormack scheme is used. A specified channel designed and developed at NASA Marshall Space Flight Centre is used in the numerical simulation. The composition of the simulated air plasma consists of seven species, namely, N2, N, O2, O, NO, NO＋, and e-. The performance of the non-equilibrium MHD accelerator is also compared with the equilibrium MHD accelerator.
文摘Motive of the study is to present quantitative and qualitative analysis and comparison of beam data measurement with FF (flattening filter) and FFF (flattening filter free) beam in a Varian TrueBeam<sup>TM</sup> Medical Linear Accelerator. Critique of beam characterization and evolution of dosimetric properties for 6 MV, 10 MV, 15 MV FF beam and 6 MVFFF, 10 MVFFF FFF beam has been carried out. We performed the comparison of photon beam data for two standard FF photon energy 6 MV, 10 MV verses 6 MVFFF, and 10 MVFFF FFF beam. Determination and comparison of parameter involved PDD (Percentage depth dose), Depth dose profile, Symmetry, Flatness, Quality index, Relative output factor, Penumbra, Transmission factor, DLG (Dosimetric leaf gap), in addition to degree of Un-flatness and off-axis ratio of FFF beam. Outcomes of presenting study had shown that change of various parameters such as Percentage depth dose curves, Shape of the depth dose profile, Transmission, Value of quality index and significant rise in surface dose for FFF in comparison with FF beam. Differences in the output factor at lower and higher field sizes for FFF beam compared to that of FF beam were found. The maximum output factor deviation between 6 MV and 6 MVFFF was found to be 4.55%, whereas in 10 MV and 10 MVFFF was 5.71%. Beam quality TPR20/10 for FFF beam was found to be lesser in magnitude, 5.42% for 6 MVFFF whereas 4.50% for 10 MVFFF compared to 6 MV and 10 MV FF beam respectively. Jaw transmission and interleaf leakage for FFF beam were found to be lesser than FF beam. Also DLG for FFF beam was found to be lesser in magnitude comparable to that of flattened beam. This study is mainly inclined towards evaluation and comparison of the FF and FFF beam. It has been observed that, the outcome of a commissioning beam data generation fully complies with vendor specification and published literature.
