3 sets of 500 MHz 300kW RF amplifiers to be used at the main ring of the Shanghai Synchrotron Radiation Facility (SSRF) have been installed on site.The Site Acceptance Test (SAT) of the first RF power source was compl...3 sets of 500 MHz 300kW RF amplifiers to be used at the main ring of the Shanghai Synchrotron Radiation Facility (SSRF) have been installed on site.The Site Acceptance Test (SAT) of the first RF power source was completed in last March.The second and third RF power sources are going well and will be finished in October.The type choice, the layout of the RF power sources and the comparison between the SAT conclusion and the design goals are presented.展开更多
A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a dr...A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.展开更多
Objective The China Spallation Neutron Source(CSNS)linac is designed with beam energy of 80 MeV and a peak current of 15 mA in the first phase.It consists of RFQ,two bunchers of medium-energy beam transmission line,fo...Objective The China Spallation Neutron Source(CSNS)linac is designed with beam energy of 80 MeV and a peak current of 15 mA in the first phase.It consists of RFQ,two bunchers of medium-energy beam transmission line,four DTL tanks and one debuncher of linac-to-ring beam transmission line.Correspondingly,eight online RF power sources are used to power these accelerators.In order to stabilize the amplitude,phase and resonant frequency of the RF accelerating field,and minimize beam loss,we have established digital low-level RF(LLRF)control system.Methods The LLRF system includes RF reference line,analog module(AM),clock distribution module,digital control module(DCM),high-power protection module,timing and RF interlock module and so on.The DCM is mainly responsible for the stability of the RF field amplitude and phase,and RF interlock module can quickly cut off the RF drive in case of arc in the RF transmission system,VSWR over threshold or cavity vacuum fault and so on.Result During beam commissioning,all of eight online units of LLRF control system were operating stably and reliably.The amplitude and phase variations of the linac fields have been achieved about±0.4%and±0.15°with 10-mA beam loading,much better than the design requirements of±1%in amplitude and±1°in phase.Conclusion With the help of this system,we achieved stable operation under different beam loads.Also,many important progresses have been achieved in the LLRF control system for amore convenient operation and a higher stability performance.This article describes the design and implementation of the LLRF for CSNS linac.展开更多
文摘3 sets of 500 MHz 300kW RF amplifiers to be used at the main ring of the Shanghai Synchrotron Radiation Facility (SSRF) have been installed on site.The Site Acceptance Test (SAT) of the first RF power source was completed in last March.The second and third RF power sources are going well and will be finished in October.The type choice, the layout of the RF power sources and the comparison between the SAT conclusion and the design goals are presented.
基金supported by the Ministry of Science,ICT and Future Planning of the Republic of Korea under the ITER Technology R&D ProgramNational R&D Program Through the National Research Foundation of Korea(NRF)Funded by the Ministry of Science,ICT&Future Planning(NRF-2014M1A7A1A03045372)
文摘A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.
基金The authors would like to sincerely thank the CSNS linac RF team for their hard work and dedication.This work was supported by the China Spallation Neutron Source project.
文摘Objective The China Spallation Neutron Source(CSNS)linac is designed with beam energy of 80 MeV and a peak current of 15 mA in the first phase.It consists of RFQ,two bunchers of medium-energy beam transmission line,four DTL tanks and one debuncher of linac-to-ring beam transmission line.Correspondingly,eight online RF power sources are used to power these accelerators.In order to stabilize the amplitude,phase and resonant frequency of the RF accelerating field,and minimize beam loss,we have established digital low-level RF(LLRF)control system.Methods The LLRF system includes RF reference line,analog module(AM),clock distribution module,digital control module(DCM),high-power protection module,timing and RF interlock module and so on.The DCM is mainly responsible for the stability of the RF field amplitude and phase,and RF interlock module can quickly cut off the RF drive in case of arc in the RF transmission system,VSWR over threshold or cavity vacuum fault and so on.Result During beam commissioning,all of eight online units of LLRF control system were operating stably and reliably.The amplitude and phase variations of the linac fields have been achieved about±0.4%and±0.15°with 10-mA beam loading,much better than the design requirements of±1%in amplitude and±1°in phase.Conclusion With the help of this system,we achieved stable operation under different beam loads.Also,many important progresses have been achieved in the LLRF control system for amore convenient operation and a higher stability performance.This article describes the design and implementation of the LLRF for CSNS linac.
