In photothermal power(solar energy)generation systems,purging residual molten salt from pipelines using highpressure gas poses a significant challenge,particularly in clearing the bottom of regulating valves.Ineffecti...In photothermal power(solar energy)generation systems,purging residual molten salt from pipelines using highpressure gas poses a significant challenge,particularly in clearing the bottom of regulating valves.Ineffective purging can lead to crystallization of the molten salt,resulting in blockages.To address this issue,understanding the gas-liquid two-phase flow dynamics during high-pressure gas purging is crucial.This study utilizes the Volume of Fluid(VOF)model and adaptive dynamic grids to simulate the gas-liquid two-phase flow during the purging process in a DN50 PN50 conventional molten salt regulating valve.Initially,the reliability of the CFD simulations is validated through comparisons with experimental data and findings from the literature.Subsequently,simulation experiments are conducted to analyze the effects of various factors,including purge flow rates,initial liquid accumulation masses,purge durations,and the profiles of the valve bottom flow channels.The results indicate that the purging process comprises four distinct stages:Initial violent surge stage,liquid discharge stage,liquid partial fallback stage,liquid dissipation stage.For an initial liquid height of 17 mm at the bottom of the valve,the critical purge flow rate lies between 3 and 5 m/s.Notably,the critical purge flow rate is independent of the initial liquid accumulation mass.As the purge gas flow rate increases,the volume of liquid discharged also increases.Beyond the critical purge flow rate,higher purge gas velocities lead to shorter purge durations.Interestingly,the residual liquid mass after purging remains unaffected by the initial liquid accumulation.Additionally,the flow channel profile at the bottom of the valve significantly influences both the critical purge speed and the efficiency of the purging process.展开更多
In modern gas turbines, rim seal located between the stator-disc and rotor-disc is used to prevent hot-gas ingestion into the inner stage-gap of high pressure turbine. However, the purge flow supplied to the cavity th...In modern gas turbines, rim seal located between the stator-disc and rotor-disc is used to prevent hot-gas ingestion into the inner stage-gap of high pressure turbine. However, the purge flow supplied to the cavity through the rim seal interacts with the main flow, producing additional aerodynamic loss due to the mixing process which plays a significant role in the formation, development and evolution of downstream secondary flow. In this paper, a set of cascade representative of low aspect ratio turbine is selected to numerically investigate the influence of upstream cavity purge flow on the hub secondary flow structure and aerodynamic loss. Cascade with/without upstream cavity and four different purge mass flow rates are all taken into account in this simulation. Then, a deep insight into the loss mechanism of interaction between purge flow and main flow is gained. The results show that the presence of cavity and purge flow has a significant impact on the main flow which not only changes the vortex structure in both the passage and upstream cavity, but also alters the cascade exit flow angle distribution along the spanwise. Moreover, aerodynamic loss in the cascade rises with the increase of purge flow rate while the sealing effect is also enhanced. Therefore, the effect of upstream cavity purge flow must be considered in the process of turbine aerodynamic design. What is more, it is necessary to minimize the purge flow rate in order to reduce aerodynamic loss on the premise of satisfying cooling requirements.展开更多
Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methan...Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methanol production unit, which are approximately15.018 t·h^(-1) in the largest methanol production complexes in the world, can be recycled to the reactor and utilized for increasing the production rate. Purge gas streams contain 63% hydrogen,20% carbon monoxide and carbon dioxide as reactants and 17% nitrogen and methane as inert. The recycling effect of beneficial components on methanol production rate has been investigated in this study. Simulation results show that methanol production enhances by recycling just hydrogen, carbon dioxide and carbon monoxide which is an effective configuration among the others. It is named as Desired Recycle Configuration(DRC) in this study. The optimum fraction of returning purge gas is calculated via one dimensional modeling of process and Response Surface Methodology(RSM) is applied to maximize the methanol flow rate and minimize the carbon dioxide flow rate. Simulation results illustrate that methanol flow rate increases by 0.106% in DRC compared to Conventional Recycle Configuration(CRC) which therefore shows the superiority of applying DRC to CRC.展开更多
A refined theoretical analysis for using the spiral airflow and axial airflow to purge residual water in an inclined pipe was presented. The computations reveal that, in most cases, the spiral flow can purge the resid...A refined theoretical analysis for using the spiral airflow and axial airflow to purge residual water in an inclined pipe was presented. The computations reveal that, in most cases, the spiral flow can purge the residual water in the inclined pipe indeed while the axial flow may induce back flow of the water, just as predicted in the experiments presented by Horii and Zhao et al. In addition, the effects of various initial conditions on water purging were studied in detail for both the spiral and axial flow cases.展开更多
During autologous bone marrow graft in treatment of malignant diseases, it is critical to purge malignant cells from the marrow. In the present study, the sensitivity to photodynamic inactivation of 3 leukemic cell li...During autologous bone marrow graft in treatment of malignant diseases, it is critical to purge malignant cells from the marrow. In the present study, the sensitivity to photodynamic inactivation of 3 leukemic cell lines was compared with their counterpart normal hematopoietic cells. After mouse leukemic L1210 cells were treated with a preparation of hematoporphyrin derivatives, YHpD, 10 μg/ml for 1 hr. and irradiated with blacklight (peak wavelength 395 nm, light intensity 0.6 mW/cm2) for 5 minutes, the survival rate of clonogenic cells decreased to <10%, while that of bone marrow granulocyte macrophage progenitor cells (CFU-GM) in DBA/2 mice remained at nearly normal level (>80%). Similar results were obtained when human leukemic HL-60 cells were compared with human CFU-GM and mouse leukemic L615 cells with CFU-GM in 615 strain mice. It is suggested that hematoporphyrin photoradiation may be useful for Iselectively killing leukemic cells in bone marrow.展开更多
Inbreeding increases genome homozygosity within populations,which can exacerbate inbreeding depression by exposing homozygous deleterious alleles that are responsible for declines in fitness traits.In small population...Inbreeding increases genome homozygosity within populations,which can exacerbate inbreeding depression by exposing homozygous deleterious alleles that are responsible for declines in fitness traits.In small populations,genetic purging that occurs under the pressure of natural selection acts as an opposing force,contributing to a reduction of deleterious alleles.Both inbreeding and genetic purging are paramount in the field of conservation genomics.The Amur tiger(Panthera tigris altaica)lives in small populations in the forests of Northeast Asia and is among the most endangered animals on the planet.Using genome-wide assessment and comparison,we reveal substantially higher and more extensive inbreeding in wild Amur tigers(F_(ROH)=0.50)than in captive individuals(F_(ROH)=0.24).However,a relatively reduced number of lossof-function mutations in wild Amur tigers is observed compared to captive individuals,indicating genetic purging of inbreeding load with relatively large-effect alleles.The higher ratio of homozygous mutation load and number of fixed damaging alleles in the wild population indicates a less-efficient genetic purging,with purifying selection also contributing to this process.These findings provide valuable insights for the future conservation of Amur tigers.展开更多
Traditional desorption methods in porous sorbents rely heavily on energy-intensive processes such as heating,vacuum pumping,or inert gas purging[1].While effective,these approaches incur substantial energy and operati...Traditional desorption methods in porous sorbents rely heavily on energy-intensive processes such as heating,vacuum pumping,or inert gas purging[1].While effective,these approaches incur substantial energy and operational costs,particularly for hydrocarbons with high boiling points or strong host-vip interactions[2].This is the same case in the newly-developed macrocyclebased crystalline adsorbents,namely nonporous adaptive crystals(NACs).To address these challenges,a recent study published in Angewandte Chemie International Edition by Jie,Ma,and co-workers reported an innovative molecular-"squeeze"triggered desorption mechanism in NACs[3-5].Specifically,ethyl acetate(EA)triggers vip desorption without penetrating the crystal pores or voids.Instead,EA molecules interact with the crystal surface through supramolecular forces,causing the adaptive closure of voids and the subsequent release of vip molecules.Unlike conventional sponges that rely on mechanical squeeze to deform themselves in the bulk for vip release,these macrocycle crystals undergo structural deformation at the molecular level and condensed phase when exposed to vaporized molecules.Because of the similar behavior between sponges and such NACs,the authors name them as sponge-likemacrocyclecrystals.展开更多
Prodrugs need to be converted to active drugs to exert their pharmacological activities.Identifying the direct targets of active drugs is essential to elucidate the pharmacological mechanisms of prodrugs,but remains c...Prodrugs need to be converted to active drugs to exert their pharmacological activities.Identifying the direct targets of active drugs is essential to elucidate the pharmacological mechanisms of prodrugs,but remains challenging,especially for active drugs with low stability.展开更多
The pollution of VOCs was studied on both side of highway.With the determination method of purge and trap concentration coupled with gas chromatography-mass spectrometry,we found that the degree of pollution near the ...The pollution of VOCs was studied on both side of highway.With the determination method of purge and trap concentration coupled with gas chromatography-mass spectrometry,we found that the degree of pollution near the highway was not very bad.展开更多
Procaine and hyperthermia have been shown to possess a relatively selective cytotoxicity to leukemlc cells. In this study, the combined effects of procaine and hyperthermia on the growth of hematopoietic progenitors (...Procaine and hyperthermia have been shown to possess a relatively selective cytotoxicity to leukemlc cells. In this study, the combined effects of procaine and hyperthermia on the growth of hematopoietic progenitors (GM-CFU) and ieukemic progenitors (L-CFU) were examined to determine if this combination resulted in a great selective killing of leukemlc cells than that achieved by procaine or heat alone. When the cells were treated simutaneously with procaine (2 mM) and hyperthermia (42℃) for one hour, the killing of L-CFU was enhanced considerably whereas GM-CFU were not markedly affected. These data Indicate that the combined treatment with procain and hyperthermia might offer an efficient mean to selectively purge residual leukemlc cells in vitro. Procaine with hyperthermia may have a role in clinical autoiogous bone marrow transplantation for acute leukemia.展开更多
Aroma of Chinese steamed bread（CSB） is one of the important parameters that determines the overall quality attributes and consumer acceptance. However, the aroma profile of CSB still remains poorly understood, mainl...Aroma of Chinese steamed bread（CSB） is one of the important parameters that determines the overall quality attributes and consumer acceptance. However, the aroma profile of CSB still remains poorly understood, mainly because of relying on only a single method for aroma extraction in previous studies. Therefore, the objective of this study was to determine the volatile aroma compounds of five different samples of CSB using three different aroma extraction methods, namely solid-phase microextraction（SPME）, simultaneous distillation–extraction（SDE）, and purge and trap（PT）. All samples showed a unique aroma profile, which could be attributed to their unique microbial consortia.（E）-2-Nonenal and（E,E）-2,4-decadienal were the most prevalent aromatic compounds revealed by SDE, which have not been reported previously, while ethanol and acetic acid proved to be the most dominant compounds by both SPME and PT. Our approach of combining three different aroma extraction methods provided better insights into the aroma profile of CSB, which had remained largely unknown in previous studies.展开更多
A sequential method for the determination of dimethyl sulfur compounds, including dimethylsulfide （DMS）, dimethylsulfonio- propionate （DMSP） and dimethylsulfoxide （DMSO）, in seawater samples has been developed. ...A sequential method for the determination of dimethyl sulfur compounds, including dimethylsulfide （DMS）, dimethylsulfonio- propionate （DMSP） and dimethylsulfoxide （DMSO）, in seawater samples has been developed. Detection limit of 2.5 pmol of DMS in 25 mL sample, corresponding to 0.10 nmol/L, was achieved. Recoveries for dimethyl sulfur compounds were in the range of 68.6- 78.3%. The relative standard deviations （R.S.D.s） for DMS, DMSP and DMSO determination were 3.0, 5.4 and 7.4%, respectively.展开更多
At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components o...At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components of PEMFC-membrane-electrode assembly (MEA) and seek feasible measures to avoid degradation. The effect of freeze/thaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freeze/thaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable performance under subzero temperature and gas purging is proved to be the effective operation.展开更多
Pre-procedural cleansing of the bowel can maximize the effectiveness and efficiency of colonoscopy.Yet,efficacy of the current gold standard colonic preparation method-high-volume oral administration of purgative agen...Pre-procedural cleansing of the bowel can maximize the effectiveness and efficiency of colonoscopy.Yet,efficacy of the current gold standard colonic preparation method-high-volume oral administration of purgative agents 12-24 h prior to the procedure-is limited by several factors,such as patient compliance(due to poor palatability and inconvenience of the dosing regimen)and risks of complications(due to drug interactions or intolerance).Attempts to resolve these limitations have included providing adjunctive agents and methods to promote the colonic cleansing ability of the principal purgative agent,with the aim of lessening unpleasant side effects(such as bloating)and reducing the large ingested volume requirement.Several promising adjunctive agents are bisacodyl,magnesium citrate,senna,simethicone,metoclopramide,and prokinetics,and each are being investigated for their potential.This review provides an up to date summary of the reported investigations into the potencies and weaknesses of the key adjuncts currently being applied in clinic as supplements to the traditional bowel preparation agents.While the comparative analysis ofthese adjuncts showed that no single agent or method has yet achieved the goal of completely overcoming the limitations of the current gold standard preparation method,they at least provide endoscopists with an array of alternatives to help improve the suboptimal efficacy of the main cleansing solutions when used alone.To aid in this clinical endeavor,a subjective grade was assigned to each adjunct to indicate its practical value.In addition,the systematic review of the currently available agents and methods provides insight into the features of each that may be overcome or exploited to create novel drugs and strategies that may become adopted as effective bowel cleansing adjuncts or alternatives.展开更多
Water disinfection is an essential process that provides safe water by inactivating pathogens that cause waterborne diseases. However, disinfectants react with organic matter naturally present in water, leading to the...Water disinfection is an essential process that provides safe water by inactivating pathogens that cause waterborne diseases. However, disinfectants react with organic matter naturally present in water, leading to the formation of disinfection by-products(DBPs). Multi-analyte methods based on mass spectrometry(MS) are preferred to quantify multiple DBP classes at once however, most require extensive sample pre-treatment and significant resources. In this study, two analytical methods were developed for the quantification of 32 regulated and unregulated DBPs. A purge and trap(P&T) coupled with gas chromatography mass spectrometry(GC-MS) method was optimized that automated sample pre-treatment and analyzed volatile and semi-volatile compounds, including trihalomethanes(THMs), iodinated trihalomethanes(I-THMs), haloacetonitriles(HANs), haloketones(HKTs) and halonitromethanes(HNMs). LOQs were between 0.02-0.4 μg/L for most DBPs except for 8 analytes that were in the low μg/L range. A second method with liquid chromatography(LC) tandem mass spectrometry(MS/MS) was developed for the quantification of 10 haloacetic acids(HAAs) with a simple clean-up and direct injection. The LC-MS/MS direct injection method has the lowest detection limits reported(0.2-0.5 μg/L). Both methods have a simple sample pre-treatment, which make it possible for routine analysis. Hyperchlorination and uniform formation conditions(UFC) formation potential tests with chlorine were evaluated with water samples containing high and low TOC. Hyperchlorination formation potential test maximized THMs and HAAs while UFC maximized HANs. Ascorbic acid was found to be an appropriate quencher for both analytical methods. Disinfected drinking water from four water utilities in Alberta, Canada were also evaluated.展开更多
文摘In photothermal power(solar energy)generation systems,purging residual molten salt from pipelines using highpressure gas poses a significant challenge,particularly in clearing the bottom of regulating valves.Ineffective purging can lead to crystallization of the molten salt,resulting in blockages.To address this issue,understanding the gas-liquid two-phase flow dynamics during high-pressure gas purging is crucial.This study utilizes the Volume of Fluid(VOF)model and adaptive dynamic grids to simulate the gas-liquid two-phase flow during the purging process in a DN50 PN50 conventional molten salt regulating valve.Initially,the reliability of the CFD simulations is validated through comparisons with experimental data and findings from the literature.Subsequently,simulation experiments are conducted to analyze the effects of various factors,including purge flow rates,initial liquid accumulation masses,purge durations,and the profiles of the valve bottom flow channels.The results indicate that the purging process comprises four distinct stages:Initial violent surge stage,liquid discharge stage,liquid partial fallback stage,liquid dissipation stage.For an initial liquid height of 17 mm at the bottom of the valve,the critical purge flow rate lies between 3 and 5 m/s.Notably,the critical purge flow rate is independent of the initial liquid accumulation mass.As the purge gas flow rate increases,the volume of liquid discharged also increases.Beyond the critical purge flow rate,higher purge gas velocities lead to shorter purge durations.Interestingly,the residual liquid mass after purging remains unaffected by the initial liquid accumulation.Additionally,the flow channel profile at the bottom of the valve significantly influences both the critical purge speed and the efficiency of the purging process.
基金Key Laboratory Foundation (9140C4103091003C) for funding this work
文摘In modern gas turbines, rim seal located between the stator-disc and rotor-disc is used to prevent hot-gas ingestion into the inner stage-gap of high pressure turbine. However, the purge flow supplied to the cavity through the rim seal interacts with the main flow, producing additional aerodynamic loss due to the mixing process which plays a significant role in the formation, development and evolution of downstream secondary flow. In this paper, a set of cascade representative of low aspect ratio turbine is selected to numerically investigate the influence of upstream cavity purge flow on the hub secondary flow structure and aerodynamic loss. Cascade with/without upstream cavity and four different purge mass flow rates are all taken into account in this simulation. Then, a deep insight into the loss mechanism of interaction between purge flow and main flow is gained. The results show that the presence of cavity and purge flow has a significant impact on the main flow which not only changes the vortex structure in both the passage and upstream cavity, but also alters the cascade exit flow angle distribution along the spanwise. Moreover, aerodynamic loss in the cascade rises with the increase of purge flow rate while the sealing effect is also enhanced. Therefore, the effect of upstream cavity purge flow must be considered in the process of turbine aerodynamic design. What is more, it is necessary to minimize the purge flow rate in order to reduce aerodynamic loss on the premise of satisfying cooling requirements.
文摘Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methanol production unit, which are approximately15.018 t·h^(-1) in the largest methanol production complexes in the world, can be recycled to the reactor and utilized for increasing the production rate. Purge gas streams contain 63% hydrogen,20% carbon monoxide and carbon dioxide as reactants and 17% nitrogen and methane as inert. The recycling effect of beneficial components on methanol production rate has been investigated in this study. Simulation results show that methanol production enhances by recycling just hydrogen, carbon dioxide and carbon monoxide which is an effective configuration among the others. It is named as Desired Recycle Configuration(DRC) in this study. The optimum fraction of returning purge gas is calculated via one dimensional modeling of process and Response Surface Methodology(RSM) is applied to maximize the methanol flow rate and minimize the carbon dioxide flow rate. Simulation results illustrate that methanol flow rate increases by 0.106% in DRC compared to Conventional Recycle Configuration(CRC) which therefore shows the superiority of applying DRC to CRC.
文摘A refined theoretical analysis for using the spiral airflow and axial airflow to purge residual water in an inclined pipe was presented. The computations reveal that, in most cases, the spiral flow can purge the residual water in the inclined pipe indeed while the axial flow may induce back flow of the water, just as predicted in the experiments presented by Horii and Zhao et al. In addition, the effects of various initial conditions on water purging were studied in detail for both the spiral and axial flow cases.
文摘During autologous bone marrow graft in treatment of malignant diseases, it is critical to purge malignant cells from the marrow. In the present study, the sensitivity to photodynamic inactivation of 3 leukemic cell lines was compared with their counterpart normal hematopoietic cells. After mouse leukemic L1210 cells were treated with a preparation of hematoporphyrin derivatives, YHpD, 10 μg/ml for 1 hr. and irradiated with blacklight (peak wavelength 395 nm, light intensity 0.6 mW/cm2) for 5 minutes, the survival rate of clonogenic cells decreased to <10%, while that of bone marrow granulocyte macrophage progenitor cells (CFU-GM) in DBA/2 mice remained at nearly normal level (>80%). Similar results were obtained when human leukemic HL-60 cells were compared with human CFU-GM and mouse leukemic L615 cells with CFU-GM in 615 strain mice. It is suggested that hematoporphyrin photoradiation may be useful for Iselectively killing leukemic cells in bone marrow.
基金supported by the Fundamental Research Funds for the Central Universities of China(2572022DQ03)the National Natural Science Foundation of China(32170517)+2 种基金the Guangdong Provincial Key Laboratory of Genome Read and Write(2017B030301011)the Start-up Scientific Foundation of Northeast Forestry University(60201524043)supported by China National GeneBank(CNGB).
文摘Inbreeding increases genome homozygosity within populations,which can exacerbate inbreeding depression by exposing homozygous deleterious alleles that are responsible for declines in fitness traits.In small populations,genetic purging that occurs under the pressure of natural selection acts as an opposing force,contributing to a reduction of deleterious alleles.Both inbreeding and genetic purging are paramount in the field of conservation genomics.The Amur tiger(Panthera tigris altaica)lives in small populations in the forests of Northeast Asia and is among the most endangered animals on the planet.Using genome-wide assessment and comparison,we reveal substantially higher and more extensive inbreeding in wild Amur tigers(F_(ROH)=0.50)than in captive individuals(F_(ROH)=0.24).However,a relatively reduced number of lossof-function mutations in wild Amur tigers is observed compared to captive individuals,indicating genetic purging of inbreeding load with relatively large-effect alleles.The higher ratio of homozygous mutation load and number of fixed damaging alleles in the wild population indicates a less-efficient genetic purging,with purifying selection also contributing to this process.These findings provide valuable insights for the future conservation of Amur tigers.
基金the Natural Science Foundation of Jiangsu Province(No.BK20240679)National Natural Science Foundation of China(No.22101134)are greatly acknowledged。
文摘Traditional desorption methods in porous sorbents rely heavily on energy-intensive processes such as heating,vacuum pumping,or inert gas purging[1].While effective,these approaches incur substantial energy and operational costs,particularly for hydrocarbons with high boiling points or strong host-vip interactions[2].This is the same case in the newly-developed macrocyclebased crystalline adsorbents,namely nonporous adaptive crystals(NACs).To address these challenges,a recent study published in Angewandte Chemie International Edition by Jie,Ma,and co-workers reported an innovative molecular-"squeeze"triggered desorption mechanism in NACs[3-5].Specifically,ethyl acetate(EA)triggers vip desorption without penetrating the crystal pores or voids.Instead,EA molecules interact with the crystal surface through supramolecular forces,causing the adaptive closure of voids and the subsequent release of vip molecules.Unlike conventional sponges that rely on mechanical squeeze to deform themselves in the bulk for vip release,these macrocycle crystals undergo structural deformation at the molecular level and condensed phase when exposed to vaporized molecules.Because of the similar behavior between sponges and such NACs,the authors name them as sponge-likemacrocyclecrystals.
基金support from the National Natural Science Foundation of China(Grant Nos.:U21A20407 and 81973467).
文摘Prodrugs need to be converted to active drugs to exert their pharmacological activities.Identifying the direct targets of active drugs is essential to elucidate the pharmacological mechanisms of prodrugs,but remains challenging,especially for active drugs with low stability.
文摘The pollution of VOCs was studied on both side of highway.With the determination method of purge and trap concentration coupled with gas chromatography-mass spectrometry,we found that the degree of pollution near the highway was not very bad.
文摘Procaine and hyperthermia have been shown to possess a relatively selective cytotoxicity to leukemlc cells. In this study, the combined effects of procaine and hyperthermia on the growth of hematopoietic progenitors (GM-CFU) and ieukemic progenitors (L-CFU) were examined to determine if this combination resulted in a great selective killing of leukemlc cells than that achieved by procaine or heat alone. When the cells were treated simutaneously with procaine (2 mM) and hyperthermia (42℃) for one hour, the killing of L-CFU was enhanced considerably whereas GM-CFU were not markedly affected. These data Indicate that the combined treatment with procain and hyperthermia might offer an efficient mean to selectively purge residual leukemlc cells in vitro. Procaine with hyperthermia may have a role in clinical autoiogous bone marrow transplantation for acute leukemia.
基金supported by the National Natural Science Foundation of China(No.31371826)the China Postdoctoral Science Foundation(No.2016M592002)
文摘Aroma of Chinese steamed bread（CSB） is one of the important parameters that determines the overall quality attributes and consumer acceptance. However, the aroma profile of CSB still remains poorly understood, mainly because of relying on only a single method for aroma extraction in previous studies. Therefore, the objective of this study was to determine the volatile aroma compounds of five different samples of CSB using three different aroma extraction methods, namely solid-phase microextraction（SPME）, simultaneous distillation–extraction（SDE）, and purge and trap（PT）. All samples showed a unique aroma profile, which could be attributed to their unique microbial consortia.（E）-2-Nonenal and（E,E）-2,4-decadienal were the most prevalent aromatic compounds revealed by SDE, which have not been reported previously, while ethanol and acetic acid proved to be the most dominant compounds by both SPME and PT. Our approach of combining three different aroma extraction methods provided better insights into the aroma profile of CSB, which had remained largely unknown in previous studies.
文摘A sequential method for the determination of dimethyl sulfur compounds, including dimethylsulfide （DMS）, dimethylsulfonio- propionate （DMSP） and dimethylsulfoxide （DMSO）, in seawater samples has been developed. Detection limit of 2.5 pmol of DMS in 25 mL sample, corresponding to 0.10 nmol/L, was achieved. Recoveries for dimethyl sulfur compounds were in the range of 68.6- 78.3%. The relative standard deviations （R.S.D.s） for DMS, DMSP and DMSO determination were 3.0, 5.4 and 7.4%, respectively.
基金Supported by the National Natural Science Foundation of China (No.20206030) and Ministry of Science and Technology 863 Hi-Technology Research and Development Program of China (2005AA501660).
文摘At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components of PEMFC-membrane-electrode assembly (MEA) and seek feasible measures to avoid degradation. The effect of freeze/thaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freeze/thaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable performance under subzero temperature and gas purging is proved to be the effective operation.
文摘Pre-procedural cleansing of the bowel can maximize the effectiveness and efficiency of colonoscopy.Yet,efficacy of the current gold standard colonic preparation method-high-volume oral administration of purgative agents 12-24 h prior to the procedure-is limited by several factors,such as patient compliance(due to poor palatability and inconvenience of the dosing regimen)and risks of complications(due to drug interactions or intolerance).Attempts to resolve these limitations have included providing adjunctive agents and methods to promote the colonic cleansing ability of the principal purgative agent,with the aim of lessening unpleasant side effects(such as bloating)and reducing the large ingested volume requirement.Several promising adjunctive agents are bisacodyl,magnesium citrate,senna,simethicone,metoclopramide,and prokinetics,and each are being investigated for their potential.This review provides an up to date summary of the reported investigations into the potencies and weaknesses of the key adjuncts currently being applied in clinic as supplements to the traditional bowel preparation agents.While the comparative analysis ofthese adjuncts showed that no single agent or method has yet achieved the goal of completely overcoming the limitations of the current gold standard preparation method,they at least provide endoscopists with an array of alternatives to help improve the suboptimal efficacy of the main cleansing solutions when used alone.To aid in this clinical endeavor,a subjective grade was assigned to each adjunct to indicate its practical value.In addition,the systematic review of the currently available agents and methods provides insight into the features of each that may be overcome or exploited to create novel drugs and strategies that may become adopted as effective bowel cleansing adjuncts or alternatives.
基金Funding for this research was provided by the Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery GrantNSERC for Water Strategic NetworkCanada Foundation for Innovation (CFI)。
文摘Water disinfection is an essential process that provides safe water by inactivating pathogens that cause waterborne diseases. However, disinfectants react with organic matter naturally present in water, leading to the formation of disinfection by-products(DBPs). Multi-analyte methods based on mass spectrometry(MS) are preferred to quantify multiple DBP classes at once however, most require extensive sample pre-treatment and significant resources. In this study, two analytical methods were developed for the quantification of 32 regulated and unregulated DBPs. A purge and trap(P&T) coupled with gas chromatography mass spectrometry(GC-MS) method was optimized that automated sample pre-treatment and analyzed volatile and semi-volatile compounds, including trihalomethanes(THMs), iodinated trihalomethanes(I-THMs), haloacetonitriles(HANs), haloketones(HKTs) and halonitromethanes(HNMs). LOQs were between 0.02-0.4 μg/L for most DBPs except for 8 analytes that were in the low μg/L range. A second method with liquid chromatography(LC) tandem mass spectrometry(MS/MS) was developed for the quantification of 10 haloacetic acids(HAAs) with a simple clean-up and direct injection. The LC-MS/MS direct injection method has the lowest detection limits reported(0.2-0.5 μg/L). Both methods have a simple sample pre-treatment, which make it possible for routine analysis. Hyperchlorination and uniform formation conditions(UFC) formation potential tests with chlorine were evaluated with water samples containing high and low TOC. Hyperchlorination formation potential test maximized THMs and HAAs while UFC maximized HANs. Ascorbic acid was found to be an appropriate quencher for both analytical methods. Disinfected drinking water from four water utilities in Alberta, Canada were also evaluated.
