Let R be an associated ring with identity. A new equivalent characterization of pure projective left R-modules is given by applying homological methods. It is proved that a left R-module P is pure projective if and on...Let R be an associated ring with identity. A new equivalent characterization of pure projective left R-modules is given by applying homological methods. It is proved that a left R-module P is pure projective if and only if for any pure epimorphism E→M→0, where E is pure injective, HomR（P, E）→HomR（P, M）→0 is exact. Also, we obtain a dual result of pure injective left R-modules. Furthermore, it is shown that every pure projective left R-module is closed under pure submodule if and only if every pure injective left R-module is closed under pure epimorphic image.展开更多
In order to study the characteristics of pure fly ash-based geopolymer concrete(PFGC)conveniently,we used a machine learning method that can quantify the perception of characteristics to predict its compressive streng...In order to study the characteristics of pure fly ash-based geopolymer concrete(PFGC)conveniently,we used a machine learning method that can quantify the perception of characteristics to predict its compressive strength.In this study,505 groups of data were collected,and a new database of compressive strength of PFGC was constructed.In order to establish an accurate prediction model of compressive strength,five different types of machine learning networks were used for comparative analysis.The five machine learning models all showed good compressive strength prediction performance on PFGC.Among them,R2,MSE,RMSE and MAE of decision tree model(DT)are 0.99,1.58,1.25,and 0.25,respectively.While R2,MSE,RMSE and MAE of random forest model(RF)are 0.97,5.17,2.27 and 1.38,respectively.The two models have high prediction accuracy and outstanding generalization ability.In order to enhance the interpretability of model decision-making,we used importance ranking to obtain the perception of machine learning model to 13 variables.These 13 variables include chemical composition of fly ash(SiO_(2)/Al_(2)O_(3),Si/Al),the ratio of alkaline liquid to the binder,curing temperature,curing durations inside oven,fly ash dosage,fine aggregate dosage,coarse aggregate dosage,extra water dosage and sodium hydroxide dosage.Curing temperature,specimen ages and curing durations inside oven have the greatest influence on the prediction results,indicating that curing conditions have more prominent influence on the compressive strength of PFGC than ordinary Portland cement concrete.The importance of curing conditions of PFGC even exceeds that of the concrete mix proportion,due to the low reactivity of pure fly ash.展开更多
Pure drug nanomedicines(PDNs)encompass active pharmaceutical ingredients(APIs),including macromolecules,biological compounds,and functional components.They overcome research barriers and conversion thresholds associat...Pure drug nanomedicines(PDNs)encompass active pharmaceutical ingredients(APIs),including macromolecules,biological compounds,and functional components.They overcome research barriers and conversion thresholds associated with nanocarriers,offering advantages such as high drug loading capacity,synergistic treatment effects,and environmentally friendly production methods.This review provides a comprehensive overview of the latest advancements in PDNs,focusing on their essential components,design theories,and manufacturing techniques.The physicochemical properties and in vivo behaviors of PDNs are thoroughly analyzed to gain an in-depth understanding of their systematic characteristics.The review introduces currently approved PDN products and further explores the opportunities and challenges in expanding their depth and breadth of application.Drug nanocrystals,drug-drug cocrystals(DDCs),antibody-drug conjugates(ADCs),and nanobodies represent the successful commercialization and widespread utilization of PDNs across various disease domains.Self-assembled pure drug nanoparticles(SAPDNPs),a next-generation product,still require extensive translational research.Challenges persist in transitioning from laboratory-scale production to mass manufacturing and overcoming the conversion threshold from laboratory findings to clinical applications.展开更多
Seismic anisotropy has been extensively acknowledged as a crucial element that influences the wave propagation characteristic during wavefield simulation,inversion and imaging.Transversely isotropy(TI)and orthorhombic...Seismic anisotropy has been extensively acknowledged as a crucial element that influences the wave propagation characteristic during wavefield simulation,inversion and imaging.Transversely isotropy(TI)and orthorhombic anisotropy(OA)are two typical categories of anisotropic media in exploration geophysics.In comparison of the elastic wave equations in both TI and OA media,pseudo-acoustic wave equations(PWEs)based on the acoustic assumption can markedly reduce computational cost and complexity.However,the presently available PWEs may experience SV-wave contamination and instability when anisotropic parameters cannot satisfy the approximated condition.Exploiting pure-mode wave equations can effectively resolve the above-mentioned issues and generate pure P-wave events without any artifacts.To further improve the computational accuracy and efficiency,we develop two novel pure qP-wave equations(PPEs)and illustrate the corresponding numerical solutions in the timespace domain for 3D tilted TI(TTI)and tilted OA(TOA)media.First,the rational polynomials are adopted to estimate the exact pure qP-wave dispersion relations,which contain complicated pseudo-differential operators with irrational forms.The polynomial coefficients are produced by applying a linear optimization algorithm to minimize the objective function difference between the expansion formula and the exact one.Then,the developed optimized PPEs are efficiently implemented using the finite-difference(FD)method in the time-space domain by introducing a scalar operator,which can help avoid the problem of spectral-based algorithms and other calculation burdens.Structures of the new equations are concise and corresponding implementation processes are straightforward.Phase velocity analyses indicate that our proposed optimized equations can lead to reliable approximation results.3D synthetic examples demonstrate that our proposed FD-based PPEs can produce accurate and stable P-wave responses,and effectively describe the wavefield features in complicated TTI and TOA media.展开更多
Pure Mg boasting a relatively small corrosion rate is a potential biodegradable metal material for implants.However,its degradation behavior in the complex physiological environment is still a lack of understanding.In...Pure Mg boasting a relatively small corrosion rate is a potential biodegradable metal material for implants.However,its degradation behavior in the complex physiological environment is still a lack of understanding.In this work,we investigated the effect of corrosion product film layers on the degradation behavior of pure Mg in physiological environments.Pure Mg shows a faster corrosion rate in simulated body fluid(SBF)compared to NaCl solution.Hydrogen evolution experiments indicate that the degradation rate of pure Mg in SBF decreases rapidly within the first 12 h but stabilizes afterward.The rapid deposition of low-solubility calcium phosphate on the pure Mg in SBF provides protection to the substrate,resulting in a gradual decrease in the degradation rates.Consequently,the corrosion product film of pure Mg formed in SBF exhibits a layered structure,with the upper layer consisting of dense Ca_(3)(PO_(4))_(2)/Mg_(3)(PO_(4))_(2) and the lower layer consisting of Mg(OH)_(2)/MgO.Electrochemical impedance spectroscopy(EIS)shows that the resistance of the corrosion product film increases over time,indicating gradual strengthening of the corrosion resistance.The 4-week degradation results in the femoral marrow cavity of mice are consistent with the result in SBF in vitro.展开更多
With the development of renewable energy,electrochemical carbon dioxide reduction reaction(CO_(2)RR)has become a potential solution for achieving carbon neutrality.However,until now,due to issues with salt precipitate...With the development of renewable energy,electrochemical carbon dioxide reduction reaction(CO_(2)RR)has become a potential solution for achieving carbon neutrality.However,until now,due to issues with salt precipitate and regeneration of the electrolyte,this technology faces challenges such as difficulty in maintaining long-term stable operation and excessive costs.The pure water CO_(2)electrolyzers are believed to be the ultimate solution to eliminate the salt depreciation and electrolyte issues.This study develops an in-situ method tailored for CO_(2)reduction in pure water.By employing distribution of relaxation times(DRT)analysis and in-situ electrochemical active surface area(ECSA)measurements,we carried out a comprehensive investigation into the mass transport and electrochemical active surface area of gas diffusion electrodes(GDE)under pure water conditions.The maximum 89%CO selectivity and high selectivity(>80%)in the range of 0-300 mA/cm^(2)were achieved using commercial Ag nanoparticles by rational design of catalyst layer.We found that ionomers influence the CO_(2)electrolyzers performance via affecting local pH,GDE-membrane interface,and CO_(2)transport,while catalyst loading mainly influences the active area and CO_(2)transport.This work provides benchmark and insights for future pure water CO_(2)electrolyzers development.展开更多
Despite significant progress in the structure and properties of porous absorbing materials,major challenges remain due to complex preparation technology,high production costs,and poor corrosion resistance.In this stud...Despite significant progress in the structure and properties of porous absorbing materials,major challenges remain due to complex preparation technology,high production costs,and poor corrosion resistance.In this study,nanowires were used as the substrate,liquid nitrogen controls ice crystal growth orientation,and ammonia gas facilitates the generation of magnetic substances.The resulting pure magnetic porous foam(PMF)material exhibits enhanced performance in absorbing electromagnetic waves(EMWs)and improved corrosion resistance.The PMF's microstructure was analyzed for its dielectric and magnetic loss characteristics.The PMF combines a porous framework,nanoscale architecture,and exclusive magnetic components to create a lightweight foam absorbent material with enhanced magnetic dissipation capabilities.Among them,the Fe_(4)N PMF demonstrates an impressive minimum reflection loss(RLmin)value of−66.8 dB at a thickness of 1.09 mm,exhibits an effective absorption bandwidth of 4.00 GHz,and shows exceptional corrosion resistance with a self-corrosion potential of−0.65 V.Moreover,the effectiveness of the Fe_(4)N PMF in absorbing intelligent EMWs has been validated through radar cross-section(RCS)simulations.In summary,this study has developed electromagnetic wave-absorbing materials with slim profiles,lightweight properties,strong absorption capabilities,and excellent corrosion resistance.These characteristics make them highly promising for microwave absorption applications.展开更多
The features of additive manufacturing(AM)have made commercially pure titanium(CP-Ti)an attractive candidate material for biomedical implants.However,achieving high strength and ductility is challenging because of the...The features of additive manufacturing(AM)have made commercially pure titanium(CP-Ti)an attractive candidate material for biomedical implants.However,achieving high strength and ductility is challenging because of the columnar structures and fine martensite formation.This study investigated the effect of carbon nanotubes(CNTs)addition on the microstructure and mechanical properties of grade 1 CP-Ti(Gr-1)during the laser powder bed fusion(L-PBF)process.A minute amount of 0.2%mass fraction(wt%)CNTs addition resulted in a high yield strength of approximately 700 MPa and exceptional ductility of 25.7%.Therein,a portion of the CNTs dissolved in the matrix as solute atoms,contributing to solution strengthening,while others were transformed into Ti C_(x)through an in situ reaction with the Ti matrix.Furthermore,the addition of CNTs resulted in the formation of a larger fraction of equiaxed grains and increased the activity of basal and prismatic slip systems.Hence,Gr-1 with CNTs exhibited significantly increased ductility while maintaining a high strength comparable to that of Gr-1 without CNTs.The insights gained from this study provide a novel approach for designing strong and ductile Ti alloys for AM.展开更多
Pure titanium fabricated by powder metallurgy generally encounters problems including low relative density and low strength,which limits its application performance.This work proposed a multi-step pressing(MSP)techniq...Pure titanium fabricated by powder metallurgy generally encounters problems including low relative density and low strength,which limits its application performance.This work proposed a multi-step pressing(MSP)technique for developing highstrength pure titanium.The MSP processes of spherical Ti powders of 15–53μm,53–105μm,and 75–180μm were systematically investigated through multi-particle fnite element method(MPFEM)compared with conventional one-step pressing(OSP)technique.The relative density,phase constitution,microstructure,and compressive mechanical properties of the sintered bulk pure titanium were characterized.Simulation results demonstrate that the MSP technique signifcantly increases the relative density of green compacts by 3.2%,3.3%,and 5.2%,respectively,compared with OSP technique.Experimental results indicate the relative density of the sintered specimens prepared by MSP spherical powders increases by 5.4%,4.5%,and 4.5%,respectively,compared to OSP,and the yield strength improves by 16%,13%,and 18%.For the sintered specimens prepared by MSP irregular powder of 15–53μm,the relative density increases by 6.0%and the yield strength increases by 15%.The enhancement of relative density and yield strength is mainly because the MSP technique mitigates stress concentration between powder particles.Compared to spherical powder,irregular powder exhibits stronger mechanical interlocking owing to the greater propensity for displacement and deformation,which facilitates mutual wedging and interlocking,resulting in superior strength performance.展开更多
Pure magnesium is a very promising material in the fields of biomedical and engineering.Obtaining pure magnesium with superior mechanical properties has consistently been a significant challenge in the area of materia...Pure magnesium is a very promising material in the fields of biomedical and engineering.Obtaining pure magnesium with superior mechanical properties has consistently been a significant challenge in the area of materials science.This study focuses on investigating the processing method and strengthening mechanism of pure magnesium by ultra-precision cutting.The research results show that the pure magnesium grains were significantly refined after ultra-precision cutting.The average grain size reduced from∼24μm to nanometers,and the average nano-hardness increased from 1.02 GPa to 2.82 GPa.Amorphous pure magnesium structure and body-centered cubic(BCC)lattice pure magnesium were reported.Molecular dynamics(MD)simulation confirmed that the high shear strain and hydrostatic pressure during ultra-precision cutting was the origin of amorphization and lattice transformation.The amorphous phase and a significant number of long-period stacking-ordered(LPSO)phases inside the pure magnesium were responsible for the high hardness after ultra-precision cutting.展开更多
Using electric motors instead of diesel engines as the driving system for mining excavators can reduce the energy consumption and operating costs.However,pure electric-driven mining excavators are prone to unexpected ...Using electric motors instead of diesel engines as the driving system for mining excavators can reduce the energy consumption and operating costs.However,pure electric-driven mining excavators are prone to unexpected power outages in mines because of drastic changes in load power,leading to significant fluctuations in the power demand of the grid,which in turn affects production.To solve the above problem,a pure electric-driven mining hydraulic excavator based on electric-motor-driven swing platform and hydraulic pumps was used as the research object.Moreover,supercapacitors and DC/DC converter,as the energy storage system(ESS)adjust the output power of the grid and recover the braking kinetic energy of the swing platform.Subsequently,a novel integrated energy management strategy for a DC bus voltage predictive controller based on the power feedforward of fuzzy rules is proposed to run mining excavators efficiently and reliably.Specifically,the working modes of the ESS are determined by the DC bus voltage and state of charge(SOC)of the supercapacitor.Next,the output power of the supercapacitor and the DC bus voltage were controlled by adjusting the charging and discharging currents of the DC/DC converter using a predictive controller and fuzzy rules.In addition,a digital prototype of the excavator was verified using an original machine test.The performance of the different strategies and driven systems were analyzed using digital prototypes.The results showed that,compared with traditional excavators with diesel engines,the operational cost of the developed excavators was reduced by 54.02%.Compared to pure electric-driven excavators without an ESS,the peak power of the grid for the developed excavators was reduced by 10%.This study designed an integrated energy management strategy for a pure electric mining excavator that can regulate the power output of the grid and maintain the stability of the bus voltage and SOC of the ESS.展开更多
The Zeeman-hyperfine-rotational spectra of ^(40)K^(87)Rb within its vibronic ground state at a magnetic field of 545.9 G are investigated by adopting the latest molecular constants available,and the results are in goo...The Zeeman-hyperfine-rotational spectra of ^(40)K^(87)Rb within its vibronic ground state at a magnetic field of 545.9 G are investigated by adopting the latest molecular constants available,and the results are in good agreement with the experimental observation made by Ospelkaus et al.[Phys.Rev.Lett.104030402(2010)].However,the calculated spectra generally shift by−3.6 kHz from the experimental ones,which implies the inaccuracy of the effective rotational constant.Therefore,we refit the spectra and obtain a new B_(eff)=1113952(1)kHz,which reduces the overall root-mean-square deviation from 10.8 kHz to 7.9 kHz.Furthermore,the pure hyperfine spectra within the J=0 and 1 rotational states are simulated.We find that the scalar nuclear spin–spin interaction dominates the hyperfine splitting of J=0 despite it being slightly indirectly affected by the nuclear electric quadruple interaction due to the rotational perturbation,while the nuclear electric quadrupole interactions dominate the splitting,and the scalar and tensor nuclear spin–spin interactions also affect the splitting of J=1.The detailed hyperfine-rotational perturbations are studied.Therefore,the scalar and tensor nuclear spin–spin interaction constants can be precisely determined by simultaneously measuring the pure hyperfine radio-frequency spectra of the J=0 and 1 states in the vibronic ground state.展开更多
The article presents an original concept of a universal philosophical language capable of transcending the boundaries between individual sciences and serving as a foundation for transdisciplinary thinking.This approac...The article presents an original concept of a universal philosophical language capable of transcending the boundaries between individual sciences and serving as a foundation for transdisciplinary thinking.This approach,developed by the author since the 1980s,is based on particular and general comparative concepts-concepts of practical mind and categories of pure mind.Therefore,the key element of the concept is the category of"particular and general",which fundamentally differs from the traditional category of"part and whole".This allows for the description of both structural and functional aspects of complex systems not only at the interdisciplinary but also at the transdisciplinary level.The primary categories of thought-Identity,Difference,Correlated,Opposite,and others-are regarded as universal notions that connect levels of reality and ensure the integration of individual sciences.Unlike contemporary transdisciplinary concepts based on Basarab Nicolescu's logic of the included middle and Edgar Morin's dialogics,the author's theory is built on the ultimate general Hegelian notion of"concrete identity"and its differentiation into a multitude of"concrete differences"-comparative concepts.As a result,a unique philosophical language has been developed,presented within the framework of the Philosophical Matrix as a system of categories of pure mind capable of describing the dynamics and wholeness of complex processes at the transdisciplinary level.The article is intended for researchers interested in the philosophical foundations of transdisciplinarity,the theory of complexity,and the development of universal categories of thought.展开更多
We first introduce the concepts of absolutely E-pure modules and E-pure split modules. Then, we characterize the IF rings in terms of absolutely E-pure modules. The E-pure split modules are also characterized.
BACKGROUND Late relapses of early-stage germ cell tumors are rare.Most patients(-85%)with stage I seminoma are cured by radical orchiectomy.The detection of late relapse is challenging given the relative rarity of thi...BACKGROUND Late relapses of early-stage germ cell tumors are rare.Most patients(-85%)with stage I seminoma are cured by radical orchiectomy.The detection of late relapse is challenging given the relative rarity of this phenomenon,and the fact that patients who have completed surveillance are usually not undergoing regular oncologic workup nor imaging.While many treatment options do exist for a patient with late relapse of seminoma,surgery is typically the mainstay as these tumors are generally thought to be more chemo-resistant.CASE SUMMARY In this article,we describe the management of a patient with an early-stage pure seminoma who was subsequently identified to have a recurrence two decades later.We provide a review of the literature not only focused on clinical factors and biology,but also the management of late recurrences specifically in pure seminoma and in prostate gland.CONCLUSION There is a paucity of data and treatment recommendations for this clinical entity,and a multidisciplinary approach emphasizing subspecialty expert consultation and patient education is imperative.展开更多
The development of microstructure and texture during cold deep drawing of commercially pure titanium（CP-Ti） was investigated.Three parts,stretching region,drawing region and flange region,were sequentially formed in...The development of microstructure and texture during cold deep drawing of commercially pure titanium（CP-Ti） was investigated.Three parts,stretching region,drawing region and flange region,were sequentially formed in the deep drawing process of the hemispheric surface part,with reference to deformation modes and strain regimes.Results show that the plastic strain is accommodated by dislocation slip and deformation twinning in the whole deep drawing process.The texture of the CP-Ti sheet and its drawn part consists of rolling texture component and recrystallization texture component.The intensity and type of the initial texture varied during the drawing process are related to the production of deformation twinning and dislocation slip.Twinning weakens the initial texture by randomizing the orientations of crystals,especially for the recrystallization texture.The recrystallization texture in the drawing region disappears due to the significant forming of twinning.Furthermore,over drawing would result in the predominance of dislocation slip and the texture is strengthened.展开更多
The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental resul...The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.展开更多
Titanium with gradient nano-to-micron scale grains from surface to matrix was fabricated by surface mechanical grinding treatment(SMGT) at room temperature.The SMGT-treated titanium shows higher strength than that of ...Titanium with gradient nano-to-micron scale grains from surface to matrix was fabricated by surface mechanical grinding treatment(SMGT) at room temperature.The SMGT-treated titanium shows higher strength than that of as-received one,but moderate ductility between those of ultra-fine grained(UFG) and coarse-grained titanium.Tensile stress-strain curves of SMGT-treated titanium show double strain hardening regimes.The strain hardening rate(dσ/dε) decreases with increasing strain in tensile deformation.The high strain hardening rate at initial yielding is attributed to nano-to-micron-grained surface layer.The low strain hardening rate at large plastic strain regime primarily results from coarse-grained matrix.The SMGT-treated titanium shows a ductile fracture mode with a large number of dimples.The small size of dimples in the treated surface layer is due to the combination of the high strength and strain hardening exponent.The difference between dimple size in nano-to-micron-grained surface layer and coarse-grained matrix is discussed in terms of plastic zone size at the tip of crack in the SMGT-treated titanium.展开更多
文摘Let R be an associated ring with identity. A new equivalent characterization of pure projective left R-modules is given by applying homological methods. It is proved that a left R-module P is pure projective if and only if for any pure epimorphism E→M→0, where E is pure injective, HomR（P, E）→HomR（P, M）→0 is exact. Also, we obtain a dual result of pure injective left R-modules. Furthermore, it is shown that every pure projective left R-module is closed under pure submodule if and only if every pure injective left R-module is closed under pure epimorphic image.
基金Funded by the Natural Science Foundation of China(No.52109168)。
文摘In order to study the characteristics of pure fly ash-based geopolymer concrete(PFGC)conveniently,we used a machine learning method that can quantify the perception of characteristics to predict its compressive strength.In this study,505 groups of data were collected,and a new database of compressive strength of PFGC was constructed.In order to establish an accurate prediction model of compressive strength,five different types of machine learning networks were used for comparative analysis.The five machine learning models all showed good compressive strength prediction performance on PFGC.Among them,R2,MSE,RMSE and MAE of decision tree model(DT)are 0.99,1.58,1.25,and 0.25,respectively.While R2,MSE,RMSE and MAE of random forest model(RF)are 0.97,5.17,2.27 and 1.38,respectively.The two models have high prediction accuracy and outstanding generalization ability.In order to enhance the interpretability of model decision-making,we used importance ranking to obtain the perception of machine learning model to 13 variables.These 13 variables include chemical composition of fly ash(SiO_(2)/Al_(2)O_(3),Si/Al),the ratio of alkaline liquid to the binder,curing temperature,curing durations inside oven,fly ash dosage,fine aggregate dosage,coarse aggregate dosage,extra water dosage and sodium hydroxide dosage.Curing temperature,specimen ages and curing durations inside oven have the greatest influence on the prediction results,indicating that curing conditions have more prominent influence on the compressive strength of PFGC than ordinary Portland cement concrete.The importance of curing conditions of PFGC even exceeds that of the concrete mix proportion,due to the low reactivity of pure fly ash.
基金supported by the National Natural Science Foundation of China(Nos.82073782 and 82241002)。
文摘Pure drug nanomedicines(PDNs)encompass active pharmaceutical ingredients(APIs),including macromolecules,biological compounds,and functional components.They overcome research barriers and conversion thresholds associated with nanocarriers,offering advantages such as high drug loading capacity,synergistic treatment effects,and environmentally friendly production methods.This review provides a comprehensive overview of the latest advancements in PDNs,focusing on their essential components,design theories,and manufacturing techniques.The physicochemical properties and in vivo behaviors of PDNs are thoroughly analyzed to gain an in-depth understanding of their systematic characteristics.The review introduces currently approved PDN products and further explores the opportunities and challenges in expanding their depth and breadth of application.Drug nanocrystals,drug-drug cocrystals(DDCs),antibody-drug conjugates(ADCs),and nanobodies represent the successful commercialization and widespread utilization of PDNs across various disease domains.Self-assembled pure drug nanoparticles(SAPDNPs),a next-generation product,still require extensive translational research.Challenges persist in transitioning from laboratory-scale production to mass manufacturing and overcoming the conversion threshold from laboratory findings to clinical applications.
基金supported by the National Key R&D Program of China(2021YFA0716902)National Natural Science Foundation of China(NSFC)under contract number 42374149 and 42004119National Science and Technology Major Project(2024ZD1002907)。
文摘Seismic anisotropy has been extensively acknowledged as a crucial element that influences the wave propagation characteristic during wavefield simulation,inversion and imaging.Transversely isotropy(TI)and orthorhombic anisotropy(OA)are two typical categories of anisotropic media in exploration geophysics.In comparison of the elastic wave equations in both TI and OA media,pseudo-acoustic wave equations(PWEs)based on the acoustic assumption can markedly reduce computational cost and complexity.However,the presently available PWEs may experience SV-wave contamination and instability when anisotropic parameters cannot satisfy the approximated condition.Exploiting pure-mode wave equations can effectively resolve the above-mentioned issues and generate pure P-wave events without any artifacts.To further improve the computational accuracy and efficiency,we develop two novel pure qP-wave equations(PPEs)and illustrate the corresponding numerical solutions in the timespace domain for 3D tilted TI(TTI)and tilted OA(TOA)media.First,the rational polynomials are adopted to estimate the exact pure qP-wave dispersion relations,which contain complicated pseudo-differential operators with irrational forms.The polynomial coefficients are produced by applying a linear optimization algorithm to minimize the objective function difference between the expansion formula and the exact one.Then,the developed optimized PPEs are efficiently implemented using the finite-difference(FD)method in the time-space domain by introducing a scalar operator,which can help avoid the problem of spectral-based algorithms and other calculation burdens.Structures of the new equations are concise and corresponding implementation processes are straightforward.Phase velocity analyses indicate that our proposed optimized equations can lead to reliable approximation results.3D synthetic examples demonstrate that our proposed FD-based PPEs can produce accurate and stable P-wave responses,and effectively describe the wavefield features in complicated TTI and TOA media.
基金supported by the National Natural Science Foundation of China(52127801)Postdoctoral Fellowship Program of CPSF under Grant Number GZC20231545,China Postdoctoral Science Foundation(2024T170557 and 2023M742224)+1 种基金Shanghai Post-doctoral Excellence Program(No.2023440)City University of Hong Kong Donation Grants(DON-RMG No.9229021 and 9220061).
文摘Pure Mg boasting a relatively small corrosion rate is a potential biodegradable metal material for implants.However,its degradation behavior in the complex physiological environment is still a lack of understanding.In this work,we investigated the effect of corrosion product film layers on the degradation behavior of pure Mg in physiological environments.Pure Mg shows a faster corrosion rate in simulated body fluid(SBF)compared to NaCl solution.Hydrogen evolution experiments indicate that the degradation rate of pure Mg in SBF decreases rapidly within the first 12 h but stabilizes afterward.The rapid deposition of low-solubility calcium phosphate on the pure Mg in SBF provides protection to the substrate,resulting in a gradual decrease in the degradation rates.Consequently,the corrosion product film of pure Mg formed in SBF exhibits a layered structure,with the upper layer consisting of dense Ca_(3)(PO_(4))_(2)/Mg_(3)(PO_(4))_(2) and the lower layer consisting of Mg(OH)_(2)/MgO.Electrochemical impedance spectroscopy(EIS)shows that the resistance of the corrosion product film increases over time,indicating gradual strengthening of the corrosion resistance.The 4-week degradation results in the femoral marrow cavity of mice are consistent with the result in SBF in vitro.
基金supported by the National Natural Science Foundation of China(No.52394204)by the Shanghai Municipal Science and Technology Major Project。
文摘With the development of renewable energy,electrochemical carbon dioxide reduction reaction(CO_(2)RR)has become a potential solution for achieving carbon neutrality.However,until now,due to issues with salt precipitate and regeneration of the electrolyte,this technology faces challenges such as difficulty in maintaining long-term stable operation and excessive costs.The pure water CO_(2)electrolyzers are believed to be the ultimate solution to eliminate the salt depreciation and electrolyte issues.This study develops an in-situ method tailored for CO_(2)reduction in pure water.By employing distribution of relaxation times(DRT)analysis and in-situ electrochemical active surface area(ECSA)measurements,we carried out a comprehensive investigation into the mass transport and electrochemical active surface area of gas diffusion electrodes(GDE)under pure water conditions.The maximum 89%CO selectivity and high selectivity(>80%)in the range of 0-300 mA/cm^(2)were achieved using commercial Ag nanoparticles by rational design of catalyst layer.We found that ionomers influence the CO_(2)electrolyzers performance via affecting local pH,GDE-membrane interface,and CO_(2)transport,while catalyst loading mainly influences the active area and CO_(2)transport.This work provides benchmark and insights for future pure water CO_(2)electrolyzers development.
基金financially supported by the National Natural Science Foundation of China(No.52471212)the National Key Research and Development Program(No.2022YFE0109800).
文摘Despite significant progress in the structure and properties of porous absorbing materials,major challenges remain due to complex preparation technology,high production costs,and poor corrosion resistance.In this study,nanowires were used as the substrate,liquid nitrogen controls ice crystal growth orientation,and ammonia gas facilitates the generation of magnetic substances.The resulting pure magnetic porous foam(PMF)material exhibits enhanced performance in absorbing electromagnetic waves(EMWs)and improved corrosion resistance.The PMF's microstructure was analyzed for its dielectric and magnetic loss characteristics.The PMF combines a porous framework,nanoscale architecture,and exclusive magnetic components to create a lightweight foam absorbent material with enhanced magnetic dissipation capabilities.Among them,the Fe_(4)N PMF demonstrates an impressive minimum reflection loss(RLmin)value of−66.8 dB at a thickness of 1.09 mm,exhibits an effective absorption bandwidth of 4.00 GHz,and shows exceptional corrosion resistance with a self-corrosion potential of−0.65 V.Moreover,the effectiveness of the Fe_(4)N PMF in absorbing intelligent EMWs has been validated through radar cross-section(RCS)simulations.In summary,this study has developed electromagnetic wave-absorbing materials with slim profiles,lightweight properties,strong absorption capabilities,and excellent corrosion resistance.These characteristics make them highly promising for microwave absorption applications.
基金financially supported by the National Key Research and Development Project of the Ministry of Science and Technology of China(No.2022YFB4601000)the Fundamental Research Funds for the Central Universities(No.2042023kf0103)the Ministry of Trade,Industry and Energy,Korea(No.20013095)。
文摘The features of additive manufacturing(AM)have made commercially pure titanium(CP-Ti)an attractive candidate material for biomedical implants.However,achieving high strength and ductility is challenging because of the columnar structures and fine martensite formation.This study investigated the effect of carbon nanotubes(CNTs)addition on the microstructure and mechanical properties of grade 1 CP-Ti(Gr-1)during the laser powder bed fusion(L-PBF)process.A minute amount of 0.2%mass fraction(wt%)CNTs addition resulted in a high yield strength of approximately 700 MPa and exceptional ductility of 25.7%.Therein,a portion of the CNTs dissolved in the matrix as solute atoms,contributing to solution strengthening,while others were transformed into Ti C_(x)through an in situ reaction with the Ti matrix.Furthermore,the addition of CNTs resulted in the formation of a larger fraction of equiaxed grains and increased the activity of basal and prismatic slip systems.Hence,Gr-1 with CNTs exhibited significantly increased ductility while maintaining a high strength comparable to that of Gr-1 without CNTs.The insights gained from this study provide a novel approach for designing strong and ductile Ti alloys for AM.
基金supports from the National Natural Science Foundation of China(No.52404382)the Key Research and Development Project of Shaanxi Province(No.2023-YBGY-090).
文摘Pure titanium fabricated by powder metallurgy generally encounters problems including low relative density and low strength,which limits its application performance.This work proposed a multi-step pressing(MSP)technique for developing highstrength pure titanium.The MSP processes of spherical Ti powders of 15–53μm,53–105μm,and 75–180μm were systematically investigated through multi-particle fnite element method(MPFEM)compared with conventional one-step pressing(OSP)technique.The relative density,phase constitution,microstructure,and compressive mechanical properties of the sintered bulk pure titanium were characterized.Simulation results demonstrate that the MSP technique signifcantly increases the relative density of green compacts by 3.2%,3.3%,and 5.2%,respectively,compared with OSP technique.Experimental results indicate the relative density of the sintered specimens prepared by MSP spherical powders increases by 5.4%,4.5%,and 4.5%,respectively,compared to OSP,and the yield strength improves by 16%,13%,and 18%.For the sintered specimens prepared by MSP irregular powder of 15–53μm,the relative density increases by 6.0%and the yield strength increases by 15%.The enhancement of relative density and yield strength is mainly because the MSP technique mitigates stress concentration between powder particles.Compared to spherical powder,irregular powder exhibits stronger mechanical interlocking owing to the greater propensity for displacement and deformation,which facilitates mutual wedging and interlocking,resulting in superior strength performance.
基金the National Natural Science Foundation of China(Nos.52175430 and 52105478)for their support of this work.
文摘Pure magnesium is a very promising material in the fields of biomedical and engineering.Obtaining pure magnesium with superior mechanical properties has consistently been a significant challenge in the area of materials science.This study focuses on investigating the processing method and strengthening mechanism of pure magnesium by ultra-precision cutting.The research results show that the pure magnesium grains were significantly refined after ultra-precision cutting.The average grain size reduced from∼24μm to nanometers,and the average nano-hardness increased from 1.02 GPa to 2.82 GPa.Amorphous pure magnesium structure and body-centered cubic(BCC)lattice pure magnesium were reported.Molecular dynamics(MD)simulation confirmed that the high shear strain and hydrostatic pressure during ultra-precision cutting was the origin of amorphization and lattice transformation.The amorphous phase and a significant number of long-period stacking-ordered(LPSO)phases inside the pure magnesium were responsible for the high hardness after ultra-precision cutting.
基金Supported by National Natural Science Foundation of ChinaShanxi Coalbased Low-Carbon Joint Fund(Grant No.U1910211)。
文摘Using electric motors instead of diesel engines as the driving system for mining excavators can reduce the energy consumption and operating costs.However,pure electric-driven mining excavators are prone to unexpected power outages in mines because of drastic changes in load power,leading to significant fluctuations in the power demand of the grid,which in turn affects production.To solve the above problem,a pure electric-driven mining hydraulic excavator based on electric-motor-driven swing platform and hydraulic pumps was used as the research object.Moreover,supercapacitors and DC/DC converter,as the energy storage system(ESS)adjust the output power of the grid and recover the braking kinetic energy of the swing platform.Subsequently,a novel integrated energy management strategy for a DC bus voltage predictive controller based on the power feedforward of fuzzy rules is proposed to run mining excavators efficiently and reliably.Specifically,the working modes of the ESS are determined by the DC bus voltage and state of charge(SOC)of the supercapacitor.Next,the output power of the supercapacitor and the DC bus voltage were controlled by adjusting the charging and discharging currents of the DC/DC converter using a predictive controller and fuzzy rules.In addition,a digital prototype of the excavator was verified using an original machine test.The performance of the different strategies and driven systems were analyzed using digital prototypes.The results showed that,compared with traditional excavators with diesel engines,the operational cost of the developed excavators was reduced by 54.02%.Compared to pure electric-driven excavators without an ESS,the peak power of the grid for the developed excavators was reduced by 10%.This study designed an integrated energy management strategy for a pure electric mining excavator that can regulate the power output of the grid and maintain the stability of the bus voltage and SOC of the ESS.
基金supported by the National Natural Science Foundation of China(Grant No.12004199).
文摘The Zeeman-hyperfine-rotational spectra of ^(40)K^(87)Rb within its vibronic ground state at a magnetic field of 545.9 G are investigated by adopting the latest molecular constants available,and the results are in good agreement with the experimental observation made by Ospelkaus et al.[Phys.Rev.Lett.104030402(2010)].However,the calculated spectra generally shift by−3.6 kHz from the experimental ones,which implies the inaccuracy of the effective rotational constant.Therefore,we refit the spectra and obtain a new B_(eff)=1113952(1)kHz,which reduces the overall root-mean-square deviation from 10.8 kHz to 7.9 kHz.Furthermore,the pure hyperfine spectra within the J=0 and 1 rotational states are simulated.We find that the scalar nuclear spin–spin interaction dominates the hyperfine splitting of J=0 despite it being slightly indirectly affected by the nuclear electric quadruple interaction due to the rotational perturbation,while the nuclear electric quadrupole interactions dominate the splitting,and the scalar and tensor nuclear spin–spin interactions also affect the splitting of J=1.The detailed hyperfine-rotational perturbations are studied.Therefore,the scalar and tensor nuclear spin–spin interaction constants can be precisely determined by simultaneously measuring the pure hyperfine radio-frequency spectra of the J=0 and 1 states in the vibronic ground state.
文摘The article presents an original concept of a universal philosophical language capable of transcending the boundaries between individual sciences and serving as a foundation for transdisciplinary thinking.This approach,developed by the author since the 1980s,is based on particular and general comparative concepts-concepts of practical mind and categories of pure mind.Therefore,the key element of the concept is the category of"particular and general",which fundamentally differs from the traditional category of"part and whole".This allows for the description of both structural and functional aspects of complex systems not only at the interdisciplinary but also at the transdisciplinary level.The primary categories of thought-Identity,Difference,Correlated,Opposite,and others-are regarded as universal notions that connect levels of reality and ensure the integration of individual sciences.Unlike contemporary transdisciplinary concepts based on Basarab Nicolescu's logic of the included middle and Edgar Morin's dialogics,the author's theory is built on the ultimate general Hegelian notion of"concrete identity"and its differentiation into a multitude of"concrete differences"-comparative concepts.As a result,a unique philosophical language has been developed,presented within the framework of the Philosophical Matrix as a system of categories of pure mind capable of describing the dynamics and wholeness of complex processes at the transdisciplinary level.The article is intended for researchers interested in the philosophical foundations of transdisciplinarity,the theory of complexity,and the development of universal categories of thought.
文摘We first introduce the concepts of absolutely E-pure modules and E-pure split modules. Then, we characterize the IF rings in terms of absolutely E-pure modules. The E-pure split modules are also characterized.
文摘BACKGROUND Late relapses of early-stage germ cell tumors are rare.Most patients(-85%)with stage I seminoma are cured by radical orchiectomy.The detection of late relapse is challenging given the relative rarity of this phenomenon,and the fact that patients who have completed surveillance are usually not undergoing regular oncologic workup nor imaging.While many treatment options do exist for a patient with late relapse of seminoma,surgery is typically the mainstay as these tumors are generally thought to be more chemo-resistant.CASE SUMMARY In this article,we describe the management of a patient with an early-stage pure seminoma who was subsequently identified to have a recurrence two decades later.We provide a review of the literature not only focused on clinical factors and biology,but also the management of late recurrences specifically in pure seminoma and in prostate gland.CONCLUSION There is a paucity of data and treatment recommendations for this clinical entity,and a multidisciplinary approach emphasizing subspecialty expert consultation and patient education is imperative.
基金Project(SKLSP200906) supported by the Fund of State Key Laboratory of Solidification Processing in NWPUProject(B08040) supported by Program of Introducing Talents of Discipline in the Project of Advanced Materials and Their Forming Technology
文摘The development of microstructure and texture during cold deep drawing of commercially pure titanium（CP-Ti） was investigated.Three parts,stretching region,drawing region and flange region,were sequentially formed in the deep drawing process of the hemispheric surface part,with reference to deformation modes and strain regimes.Results show that the plastic strain is accommodated by dislocation slip and deformation twinning in the whole deep drawing process.The texture of the CP-Ti sheet and its drawn part consists of rolling texture component and recrystallization texture component.The intensity and type of the initial texture varied during the drawing process are related to the production of deformation twinning and dislocation slip.Twinning weakens the initial texture by randomizing the orientations of crystals,especially for the recrystallization texture.The recrystallization texture in the drawing region disappears due to the significant forming of twinning.Furthermore,over drawing would result in the predominance of dislocation slip and the texture is strengthened.
基金Projects(51074031,51271042,50874022)supported by the National Natural Science Foundation of ChinaProject(2013M530913)supported by the China Postdoctoral Science FoundationProject(DUT12RC(3)35)supported by the Fundamental Research Funds for the Central Universities of China
文摘The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.
基金Project(2014CB644003)supported by the National Basic Research Program of ChinaProject(51321003)supported by the National Natural Science Foundation of ChinaProject(B06025)supported by"111"Project of China
文摘Titanium with gradient nano-to-micron scale grains from surface to matrix was fabricated by surface mechanical grinding treatment(SMGT) at room temperature.The SMGT-treated titanium shows higher strength than that of as-received one,but moderate ductility between those of ultra-fine grained(UFG) and coarse-grained titanium.Tensile stress-strain curves of SMGT-treated titanium show double strain hardening regimes.The strain hardening rate(dσ/dε) decreases with increasing strain in tensile deformation.The high strain hardening rate at initial yielding is attributed to nano-to-micron-grained surface layer.The low strain hardening rate at large plastic strain regime primarily results from coarse-grained matrix.The SMGT-treated titanium shows a ductile fracture mode with a large number of dimples.The small size of dimples in the treated surface layer is due to the combination of the high strength and strain hardening exponent.The difference between dimple size in nano-to-micron-grained surface layer and coarse-grained matrix is discussed in terms of plastic zone size at the tip of crack in the SMGT-treated titanium.
