Recent studies have indicated that the injection of carbon dioxide(CO_(2))can lead to increased oil recovery in fractured shale reservoirs following natural depletion.Despite advancements in understanding mass exchang...Recent studies have indicated that the injection of carbon dioxide(CO_(2))can lead to increased oil recovery in fractured shale reservoirs following natural depletion.Despite advancements in understanding mass exchange processes in subsurface formations,there remains a knowledge gap concerning the disparities in these processes between the matrix and fractures at the pore scale in formations with varying permeability.This study aims to experimentally investigate the CO_(2) diffusion behaviors and in situ oil recovery through a CO_(2) huff‘n’puff process in the Jimsar shale oil reservoir.To achieve this,we designed three matrix-fracture models with different permeabilities(0.074 mD,0.170 mD,and 0.466 mD)and experimented at 30 MPa and 91℃.The oil concentration in both the matrix and fracture was monitored using a low-field nuclear magnetic resonance(LF-NMR)technique to quantify in situ oil recovery and elucidate mass-exchange behaviors.The results showed that after three cycles of CO_(2) huff‘n’puff,the total recovery degree increased from 30.28%to 34.95%as the matrix permeability of the core samples increased from 0.074 to 0.466 mD,indicating a positive correlation between CO_(2) extraction efficiency and matrix permeability.Under similar fracture conditions,the increase in matrix permeability further promoted CO_(2) extraction efficiency during CO_(2) huff‘n’puff.Specifically,the increase in matrix permeability of the core had the greatest effect on the extraction of the first-cycle injection in large pores,which increased from 16.42%to 36.64%.The findings from our research provide valuable insights into the CO_(2) huff‘n’puff effects in different pore sizes following fracturing under varying permeability conditions,shedding light on the mechanisms of CO_(2)-enhanced oil recovery in fractured shale oil reservoirs.展开更多
A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI dat...A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.展开更多
[Objective] The aim was to research application of revised puff trajectory model in atmospheric environmental risks simulation.[Method] In the research,theory of puff trajectory model for pollution diffusion in atmosp...[Objective] The aim was to research application of revised puff trajectory model in atmospheric environmental risks simulation.[Method] In the research,theory of puff trajectory model for pollution diffusion in atmosphere in urban areas was analyzed and CALPUFF,a revised puff trajectory model,was applied in prediction on atmospheric environmental risks in Xining City.[Result] The simple puff trajectory model can not be applied for long-distance transport or in complex terrain and airflow field.In contrast,CALPUFF would be applied in urban areas,and complex terrain or underlying surface.With high resolution ratio,it would depict the beginning condition and detailed distribution of pollutants transport and diffusion.For prediction on atmospheric environmental risks in Xining City,northwest wind dominated in Huangshui Valley;north wind dominated in Beichuan Valley;temperature inversion occurred at high altitude.These had a significant effect on the downwind direction in Xining urban district.The simulation results indicated that puffs usually spread along Huangshui Valley and some non-steady phenomena occurred,such as blocking effect by mountains,deformation of puff by airflow field in ridges and influence of valley wind.[Conclusion] The research is of significance for precise prediction on characters,influence and extent of atmospheric environmental risks in cities.展开更多
The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between rela...The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between relaxation time(T_(2))and pore size is calibrated.Nuclear magnetic resonance experiments of CO_(2)huff and puff in shale samples are carried out to study the effects of gas injection pressure,soaking time and fractures on the oil production characteristics of shale pores from the micro scale.The recovery degrees of small pores(less than or equal to 50 nm)and large pores(greater than 50 nm)are quantitatively evaluated.The experimental results show that the recovery degree of crude oil in large pores increases rapidly with the increase of injection pressure under immiscible conditions,and the effect of injection pressure rise on recovery degree of large pores decreases under miscible conditions;whether miscible or not,the recovery degree of crude oil in small pores basically maintains a linear increase with the increase of injection pressure,and the lower size limit of pores in which oil can be recovered by CO_(2)decreases with the increase of gas injection pressure;with the increase of soaking time,the recovery degree of crude oil in large pores increases slowly gradually,while the recovery degree of crude oil in small pores increases faster and then decelerates,and the best soaking time in the experiments is about 10 h;the existence of fractures can enhance the recovery degrees of crude oil in small pores and large pores noticeably.展开更多
CO_(2)huff and puff experiments of different injection parameters,production parameters and soaking time were carried out on large-scale cubic and long columnar outcrop samples to analyze dynamic characteristics and i...CO_(2)huff and puff experiments of different injection parameters,production parameters and soaking time were carried out on large-scale cubic and long columnar outcrop samples to analyze dynamic characteristics and influencing factors of CO_(2)huff and puff and the contribution of sweeping mode to recovery.The experimental results show that the development process of CO_(2)huff and puff can be divided into four stages,namely,CO_(2)backflow,production of gas with some oil,high-speed oil production,and oil production rate decline stages.The production of gas with some oil stage is dominated by free gas displacement,and the high-speed oil production stage is dominated by dissolved gas displacement.CO_(2)injection volume and development speed are the major factors affecting the oil recovery.The larger the injected CO_(2)volume and the lower the development speed,the higher the oil recovery will be.The reasonable CO_(2)injection volume and development speed should be worked out according to oilfield demand and economic evaluation.There is a reasonable soaking time in CO_(2)huff and puff.Longer soaking time than the optimum time makes little contribution to oil recovery.In field applications,the stability of bottom hole pressure is important to judge whether the soaking time is sufficient during the huff period.The oil recovery of CO_(2)huff and puff mainly comes from the contribution of flow sweep and diffusion sweep,and diffusion sweep contributes more to the oil recovery when the soaking time is sufficient.展开更多
A gas puff imaging(GPI) diagnostic has been developed and applied to measure edge plasma turbulence on the HL-2A tokamak.The principle and experimental setup of GPI are described.GPI is applied to investigate blobs in...A gas puff imaging(GPI) diagnostic has been developed and applied to measure edge plasma turbulence on the HL-2A tokamak.The principle and experimental setup of GPI are described.GPI is applied to investigate blobs in the edge and scrape-off layer.Statistical characterizations of GPI line emission intensity are calculated, including the probability density functions(PDFs),skewness, and kurtosis of the intensity, which are found to be consistent with measurements by Langmuir probes.Besides, the track of blob motions is recorded by time sequence of individual frames.The characteristics of the original images and the relatively high-frequency(>10 kHz)/low-frequency(1–10 kHz) component images are illustrated.The observation of the blob’s structures and high-speed motions proves the success and high performance of the GPI diagnostic.展开更多
A comparison between a non-Gaussian puff model and an advanced time-dependent model to simulate the pollutant dispersion in the Planetary Boundary Layer is presented. The puff model is based on a general technique for...A comparison between a non-Gaussian puff model and an advanced time-dependent model to simulate the pollutant dispersion in the Planetary Boundary Layer is presented. The puff model is based on a general technique for solving the K-equation, using the truncated Gram-Charlier expansion (type A) of the concentration field and finite set equations for the corresponding moments. The other model (named ADMM: Analytical Dispersion Multilayers Model) is an semi- analytical solution to the time-dependent two-dimensional advection-diffusion equation based on a discretization of the PBL in N sub-layers;in each sub-layers the advection-diffusion equation is solved by the Laplace transform technique, considering an average value for eddy diffusivity and the wind speed. A preliminary performance evaluation is shown in the case of continuous emission from an elevated source in a variable boundary layer. Both models were able to correctly reproduce the concentration field measured and so to be used as operative air pollution models.展开更多
A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ...A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ADMM (Advection Diffusion Multilayer Method) and GILTT (Generalized Integral Laplace Transform Technique) techniques. Both approaches accept wind and eddy diffusion coefficients with any restriction in their height functions. Comparisons between values predicted by the models against experimental ground-level concentrations (from Copenhagen data set) are shown. The preliminary results confirm the applicability of the approaches proposed and are promising for future work.展开更多
The impact of resonant magnetic perturbation(RMP)on blob motion and structure in the SOL of the HL-2A tokamak is studied using a gas puff imaging diagnostic.Ellipse fitting is applied to study the structure and motion...The impact of resonant magnetic perturbation(RMP)on blob motion and structure in the SOL of the HL-2A tokamak is studied using a gas puff imaging diagnostic.Ellipse fitting is applied to study the structure and motion of blobs quantitatively.The radial locations,amplitudes and scale sizes of blobs are obtained based on the fitted ellipse.Furthermore,based on the measurement of blob location,the radial and poloidal velocities of blobs are calculated.With the application of RMP,the edge poloidal shear flow is significantly weakened and the wave number spectrum changes from quasisymmetric to significantly up-down asymmetric.The application of RMP also causes the detected blob location to be much further into the far scrape-off layer(SOL)and increases the blob amplitude.Blob poloidal velocity in the SOL is slowed.Larger-size and longer-lifetime blobs are observed with RMP.With the application of RMP,stronger-amplitude and larger-size blobs are detected in the far SOL and they may cause a more serious erosion problem to the first wall.展开更多
Well interference has become a common phenomenon with the increasing scale of horizontal well fracturing.Recent studies on well interference in horizontal wells do not properly reflect the physical model of the postfr...Well interference has become a common phenomenon with the increasing scale of horizontal well fracturing.Recent studies on well interference in horizontal wells do not properly reflect the physical model of the postfracturing well groups and the realistic fracturing process of infill wells.Establishing the correspondence between well interference causative factors and manifestations is of great significance for infill well deployment and secondary oil recovery.In this work,we develop a numerical model that considers low velocity non-Darcy seepage inshale reservoirs to study the inter-well interferencephenomenon that occurs in theSantanghufield,andconstruct an explicit hydraulic fracture and complex natural fracture network model with an embedded discrete fracture model,focusing on the effect of fracture network morphology on well interactions.The model also considers a multi-segment wellbore model to accommodate the effect of inter-well crossflow on wellbore tubular flow.The changes in formation pressure and water saturation during fracturing are performed by controlling the injection pressure and water injection rate.The result shows that the shape of the fracture network generated by the infill well with the old well determines the subsequent fluid and oil-increasing performance of the disturbed well.The synergistic production or competitive relationship formed by fractures with different connectivity between the two wells determines the positive and negative effects of the interference.The paper also investigates the adaptation study of water injection huff and puff schemes for well groups with different connectivity,and demonstrated a potential yield increase of up to 10.85%under adaptation injection.This method of identifying well interference based on the production dynamics of affected wells and the subsequent corresponding water injection method provides valuable references for the selection of secondary oil recovery measures.展开更多
The M block in Liaohe Oilfield uses steam huff and puff coupled with water flooding, and it has entered the middle-later period of oilfield development To keep stable yield, the development mode should be changed. Bas...The M block in Liaohe Oilfield uses steam huff and puff coupled with water flooding, and it has entered the middle-later period of oilfield development To keep stable yield, the development mode should be changed. Based on the geological characteristics in the M block, this paper puts forward two different ways： Horizontal well injects steam to steam drive; Horizontal well as product well when vertical well injects steam. Combined with practical data and using numerical simulation to analysis, the results show that： Horizontal Well injects steam to steam driving is the best way; the recovery percent is as high as 22.72%. This development mode will work no matter in the short run or getting the economic limit rate.展开更多
Gas puff imaging （GPI） is one of the important diagnostics for the （ITPAC international tokamak physics activity ） and entering the ITPA IDD （ international diagnostics database ） . GPI is related to many invest...Gas puff imaging （GPI） is one of the important diagnostics for the （ITPAC international tokamak physics activity ） and entering the ITPA IDD （ international diagnostics database ） . GPI is related to many investigations, for example, edge radiations, etc.展开更多
CO_(2)huff and puff technology can enhance the recovery of heavy oil in high-water-cut stages.However,the effectiveness of this method varies significantly under different geological and fluid conditions,which leads t...CO_(2)huff and puff technology can enhance the recovery of heavy oil in high-water-cut stages.However,the effectiveness of this method varies significantly under different geological and fluid conditions,which leads to a high-dimensional and small-sample(HDSS)dataset.It is difficult for conventional techniques that identify key factors that influence CO_(2)huff and puff effects,such as fuzzy mathematics,to manage HDSS datasets,which often contain nonlinear and irremovable abnormal data.To accurately pinpoint the primary control factors for heavy oil CO_(2)huff and puff,four machine learning classification algorithms were adopted.These algorithms were selected to align with the characteristics of HDSS datasets,taking into account algorithmic principles and an analysis of key control factors.The results demonstrated that logistic regression encounters difficulties when dealing with nonlinear data,whereas the extreme gradient boosting and gradient boosting decision tree algorithms exhibit greater sensitivity to abnormal data.By contrast,the random forest algorithm proved to be insensitive to outliers and provided a reliable ranking of factors that influence CO_(2)huff and puff effects.The top five control factors identified were the distance between parallel wells,cumulative gas injection volume,liquid production rate of parallel wells,huff and puff timing,and heterogeneous Lorentz coefficient.These research find-ings not only contribute to the precise implementation of heavy oil CO_(2)huff and puff but also offer valuable insights into selecting classification algorithms for typical HDSS data.展开更多
基金National Natural Science Foundation of China via grant number 52174035,52304048China Postdoctoral Science Foundation(2022M722637)Research and Innovation Fund for Graduate Students of Southwest Petroleum University(2022KYCX026).
文摘Recent studies have indicated that the injection of carbon dioxide(CO_(2))can lead to increased oil recovery in fractured shale reservoirs following natural depletion.Despite advancements in understanding mass exchange processes in subsurface formations,there remains a knowledge gap concerning the disparities in these processes between the matrix and fractures at the pore scale in formations with varying permeability.This study aims to experimentally investigate the CO_(2) diffusion behaviors and in situ oil recovery through a CO_(2) huff‘n’puff process in the Jimsar shale oil reservoir.To achieve this,we designed three matrix-fracture models with different permeabilities(0.074 mD,0.170 mD,and 0.466 mD)and experimented at 30 MPa and 91℃.The oil concentration in both the matrix and fracture was monitored using a low-field nuclear magnetic resonance(LF-NMR)technique to quantify in situ oil recovery and elucidate mass-exchange behaviors.The results showed that after three cycles of CO_(2) huff‘n’puff,the total recovery degree increased from 30.28%to 34.95%as the matrix permeability of the core samples increased from 0.074 to 0.466 mD,indicating a positive correlation between CO_(2) extraction efficiency and matrix permeability.Under similar fracture conditions,the increase in matrix permeability further promoted CO_(2) extraction efficiency during CO_(2) huff‘n’puff.Specifically,the increase in matrix permeability of the core had the greatest effect on the extraction of the first-cycle injection in large pores,which increased from 16.42%to 36.64%.The findings from our research provide valuable insights into the CO_(2) huff‘n’puff effects in different pore sizes following fracturing under varying permeability conditions,shedding light on the mechanisms of CO_(2)-enhanced oil recovery in fractured shale oil reservoirs.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(Nos.2022YFE03030001,2022YFE03020004 and 2022YFE 03050003)National Natural Science Foundation of China(Nos.12275310,11975275,12175277 and 11975271)+2 种基金the Science Foundation of Institute of Plasma Physics,Chinese Academy of Sciences(No.DSJJ-2021-01)the Collaborative Innovation Program of Hefei Science Center,Chinese Academy of Sciences(No.2021HSC-CIP019)the Users with Excellence Program of Hefei Science Center,Chinese Academy of Sciences(Nos.2021HSC-UE014 and 2021HSCUE012)。
文摘A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.
文摘[Objective] The aim was to research application of revised puff trajectory model in atmospheric environmental risks simulation.[Method] In the research,theory of puff trajectory model for pollution diffusion in atmosphere in urban areas was analyzed and CALPUFF,a revised puff trajectory model,was applied in prediction on atmospheric environmental risks in Xining City.[Result] The simple puff trajectory model can not be applied for long-distance transport or in complex terrain and airflow field.In contrast,CALPUFF would be applied in urban areas,and complex terrain or underlying surface.With high resolution ratio,it would depict the beginning condition and detailed distribution of pollutants transport and diffusion.For prediction on atmospheric environmental risks in Xining City,northwest wind dominated in Huangshui Valley;north wind dominated in Beichuan Valley;temperature inversion occurred at high altitude.These had a significant effect on the downwind direction in Xining urban district.The simulation results indicated that puffs usually spread along Huangshui Valley and some non-steady phenomena occurred,such as blocking effect by mountains,deformation of puff by airflow field in ridges and influence of valley wind.[Conclusion] The research is of significance for precise prediction on characters,influence and extent of atmospheric environmental risks in cities.
基金Supported by the National Natural Science Foundation of China Youth Project(52004221)National Natural Science Foundation of China Project(5207042143)Shaanxi Provincial Department of Education Scientific Research Project(21JY034)。
文摘The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between relaxation time(T_(2))and pore size is calibrated.Nuclear magnetic resonance experiments of CO_(2)huff and puff in shale samples are carried out to study the effects of gas injection pressure,soaking time and fractures on the oil production characteristics of shale pores from the micro scale.The recovery degrees of small pores(less than or equal to 50 nm)and large pores(greater than 50 nm)are quantitatively evaluated.The experimental results show that the recovery degree of crude oil in large pores increases rapidly with the increase of injection pressure under immiscible conditions,and the effect of injection pressure rise on recovery degree of large pores decreases under miscible conditions;whether miscible or not,the recovery degree of crude oil in small pores basically maintains a linear increase with the increase of injection pressure,and the lower size limit of pores in which oil can be recovered by CO_(2)decreases with the increase of gas injection pressure;with the increase of soaking time,the recovery degree of crude oil in large pores increases slowly gradually,while the recovery degree of crude oil in small pores increases faster and then decelerates,and the best soaking time in the experiments is about 10 h;the existence of fractures can enhance the recovery degrees of crude oil in small pores and large pores noticeably.
文摘CO_(2)huff and puff experiments of different injection parameters,production parameters and soaking time were carried out on large-scale cubic and long columnar outcrop samples to analyze dynamic characteristics and influencing factors of CO_(2)huff and puff and the contribution of sweeping mode to recovery.The experimental results show that the development process of CO_(2)huff and puff can be divided into four stages,namely,CO_(2)backflow,production of gas with some oil,high-speed oil production,and oil production rate decline stages.The production of gas with some oil stage is dominated by free gas displacement,and the high-speed oil production stage is dominated by dissolved gas displacement.CO_(2)injection volume and development speed are the major factors affecting the oil recovery.The larger the injected CO_(2)volume and the lower the development speed,the higher the oil recovery will be.The reasonable CO_(2)injection volume and development speed should be worked out according to oilfield demand and economic evaluation.There is a reasonable soaking time in CO_(2)huff and puff.Longer soaking time than the optimum time makes little contribution to oil recovery.In field applications,the stability of bottom hole pressure is important to judge whether the soaking time is sufficient during the huff period.The oil recovery of CO_(2)huff and puff mainly comes from the contribution of flow sweep and diffusion sweep,and diffusion sweep contributes more to the oil recovery when the soaking time is sufficient.
基金supported by the National Key Research and Development Program of China (No.2017YFE0300405)National Natural Science Foundation of China (Nos.11575055, 11705052, 11875124, 11475058, and 11475056)+1 种基金the National Key Research and Development Program of China (Nos.2017YFE0301201, 2018YFE0303102, 2018YFE0309103)the Chinese National Fusion Project for ITER (No.2015GB104000)
文摘A gas puff imaging(GPI) diagnostic has been developed and applied to measure edge plasma turbulence on the HL-2A tokamak.The principle and experimental setup of GPI are described.GPI is applied to investigate blobs in the edge and scrape-off layer.Statistical characterizations of GPI line emission intensity are calculated, including the probability density functions(PDFs),skewness, and kurtosis of the intensity, which are found to be consistent with measurements by Langmuir probes.Besides, the track of blob motions is recorded by time sequence of individual frames.The characteristics of the original images and the relatively high-frequency(>10 kHz)/low-frequency(1–10 kHz) component images are illustrated.The observation of the blob’s structures and high-speed motions proves the success and high performance of the GPI diagnostic.
文摘A comparison between a non-Gaussian puff model and an advanced time-dependent model to simulate the pollutant dispersion in the Planetary Boundary Layer is presented. The puff model is based on a general technique for solving the K-equation, using the truncated Gram-Charlier expansion (type A) of the concentration field and finite set equations for the corresponding moments. The other model (named ADMM: Analytical Dispersion Multilayers Model) is an semi- analytical solution to the time-dependent two-dimensional advection-diffusion equation based on a discretization of the PBL in N sub-layers;in each sub-layers the advection-diffusion equation is solved by the Laplace transform technique, considering an average value for eddy diffusivity and the wind speed. A preliminary performance evaluation is shown in the case of continuous emission from an elevated source in a variable boundary layer. Both models were able to correctly reproduce the concentration field measured and so to be used as operative air pollution models.
文摘A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ADMM (Advection Diffusion Multilayer Method) and GILTT (Generalized Integral Laplace Transform Technique) techniques. Both approaches accept wind and eddy diffusion coefficients with any restriction in their height functions. Comparisons between values predicted by the models against experimental ground-level concentrations (from Copenhagen data set) are shown. The preliminary results confirm the applicability of the approaches proposed and are promising for future work.
基金supported by the National Key Research and Development Program of China(Nos.2022YFE03100002,2022YFE03010004 and 2019YFE03060002)National Natural Science Foundation of China(Nos.U1867222,U1967206 and 51821005)the Sichuan Natural Science Foundation(Nos.2022NSFSC1791 and 2020JDTD0030).
文摘The impact of resonant magnetic perturbation(RMP)on blob motion and structure in the SOL of the HL-2A tokamak is studied using a gas puff imaging diagnostic.Ellipse fitting is applied to study the structure and motion of blobs quantitatively.The radial locations,amplitudes and scale sizes of blobs are obtained based on the fitted ellipse.Furthermore,based on the measurement of blob location,the radial and poloidal velocities of blobs are calculated.With the application of RMP,the edge poloidal shear flow is significantly weakened and the wave number spectrum changes from quasisymmetric to significantly up-down asymmetric.The application of RMP also causes the detected blob location to be much further into the far scrape-off layer(SOL)and increases the blob amplitude.Blob poloidal velocity in the SOL is slowed.Larger-size and longer-lifetime blobs are observed with RMP.With the application of RMP,stronger-amplitude and larger-size blobs are detected in the far SOL and they may cause a more serious erosion problem to the first wall.
基金This work is supported by Open Fund Project“Study on Multiphase Flow Semi-Analytical Method for Horizontal Wells of Continental Shale Condensate Gas”of Sinopec Key Laboratory of Shale Oil/Gas Exploration and Production Technology.
文摘Well interference has become a common phenomenon with the increasing scale of horizontal well fracturing.Recent studies on well interference in horizontal wells do not properly reflect the physical model of the postfracturing well groups and the realistic fracturing process of infill wells.Establishing the correspondence between well interference causative factors and manifestations is of great significance for infill well deployment and secondary oil recovery.In this work,we develop a numerical model that considers low velocity non-Darcy seepage inshale reservoirs to study the inter-well interferencephenomenon that occurs in theSantanghufield,andconstruct an explicit hydraulic fracture and complex natural fracture network model with an embedded discrete fracture model,focusing on the effect of fracture network morphology on well interactions.The model also considers a multi-segment wellbore model to accommodate the effect of inter-well crossflow on wellbore tubular flow.The changes in formation pressure and water saturation during fracturing are performed by controlling the injection pressure and water injection rate.The result shows that the shape of the fracture network generated by the infill well with the old well determines the subsequent fluid and oil-increasing performance of the disturbed well.The synergistic production or competitive relationship formed by fractures with different connectivity between the two wells determines the positive and negative effects of the interference.The paper also investigates the adaptation study of water injection huff and puff schemes for well groups with different connectivity,and demonstrated a potential yield increase of up to 10.85%under adaptation injection.This method of identifying well interference based on the production dynamics of affected wells and the subsequent corresponding water injection method provides valuable references for the selection of secondary oil recovery measures.
文摘The M block in Liaohe Oilfield uses steam huff and puff coupled with water flooding, and it has entered the middle-later period of oilfield development To keep stable yield, the development mode should be changed. Based on the geological characteristics in the M block, this paper puts forward two different ways： Horizontal well injects steam to steam drive; Horizontal well as product well when vertical well injects steam. Combined with practical data and using numerical simulation to analysis, the results show that： Horizontal Well injects steam to steam driving is the best way; the recovery percent is as high as 22.72%. This development mode will work no matter in the short run or getting the economic limit rate.
文摘Gas puff imaging （GPI） is one of the important diagnostics for the （ITPAC international tokamak physics activity ） and entering the ITPA IDD （ international diagnostics database ） . GPI is related to many investigations, for example, edge radiations, etc.
基金supported by the Science Foundation of China University of Petroleum(2462019YJRC013).
文摘CO_(2)huff and puff technology can enhance the recovery of heavy oil in high-water-cut stages.However,the effectiveness of this method varies significantly under different geological and fluid conditions,which leads to a high-dimensional and small-sample(HDSS)dataset.It is difficult for conventional techniques that identify key factors that influence CO_(2)huff and puff effects,such as fuzzy mathematics,to manage HDSS datasets,which often contain nonlinear and irremovable abnormal data.To accurately pinpoint the primary control factors for heavy oil CO_(2)huff and puff,four machine learning classification algorithms were adopted.These algorithms were selected to align with the characteristics of HDSS datasets,taking into account algorithmic principles and an analysis of key control factors.The results demonstrated that logistic regression encounters difficulties when dealing with nonlinear data,whereas the extreme gradient boosting and gradient boosting decision tree algorithms exhibit greater sensitivity to abnormal data.By contrast,the random forest algorithm proved to be insensitive to outliers and provided a reliable ranking of factors that influence CO_(2)huff and puff effects.The top five control factors identified were the distance between parallel wells,cumulative gas injection volume,liquid production rate of parallel wells,huff and puff timing,and heterogeneous Lorentz coefficient.These research find-ings not only contribute to the precise implementation of heavy oil CO_(2)huff and puff but also offer valuable insights into selecting classification algorithms for typical HDSS data.
