Reverse water gas shift (RWGS) reaction can serve as a pivotal stage in the CO2 conversion processes, which is vital for the utilization of CO2. In this study, RWGS reaction was performed over Pt/CeO2 catalysts at the...Reverse water gas shift (RWGS) reaction can serve as a pivotal stage in the CO2 conversion processes, which is vital for the utilization of CO2. In this study, RWGS reaction was performed over Pt/CeO2 catalysts at the temperature range of 200-500 degrees C under ambient pressure. Compared with pure CeO2, Pt/CeO2 catalysts exhibited superior RWGS activity at lower reaction temperature. Meanwhile, the calculated TOF and E-a values are approximately the same over these Pt/CeO2 catalysts pretreated under various calcination conditions, indicating that the RWGS reaction is not affected by the morphologies of anchored Pt nanoparticles or the primary crystallinity of CeO2. TPR and XPS results indicated that the incorporation of Pt promoted the reducibility of CeO2 support and remarkably increased the content of Ce 3 + sites on the catalyst surface. Furthermore, the CO TPSR-MS signal under the condition of pure CO2 flow over Pt/CeO 2 catalyst is far lower than that under the condition of adsorbed CO2 with H-2 -assisted flow, revealing that CO2 molecules adsorbed on Ce3+ active sites have difficult in generating CO directly. Meanwhile, the adsorbed CO2 with the assistance of H-2 can form formate species easily over Ce3+ active sites and then decompose into Ce3+-CO species for CO production, which was identified by in-situ FTIR. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B. V. and Science Press. All rights reserved.展开更多
This study was focused on the influence of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation. A series of CeO2 supports with different contents of active oxygen were obtained by adding surfactant ...This study was focused on the influence of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation. A series of CeO2 supports with different contents of active oxygen were obtained by adding surfactant at different synthesis steps. 0.25 wt% Pt was loaded on these CeO2 supports by incipientwetness impregnation methods. The catalysts were characterized by N2 adsorption, X-ray diffraction（XRD）, high-resolution transmission electron microscopy（HRTEM）, H2 temperature-programmed reduction（H2-TPR）, dynamic oxygen storage capacity（DOSC） and in-situ DRIFTS technologies. For S-f supports, the surfactant was added into the solution before spray-drying in the synthesis process, which facilitates more active oxygen formation on the surface of CeO2. After loading Pt, the more active oxygen on CeO2 contributes to dispersing Pt species and enhancing the CO oxidation activity. As for the aged samples,Pt-R-h shows the highest activity above 190 ℃ because of the presence of more partly oxidized Pt^（δ＋） species. Thus the activity is also influenced by the states of Pt and the Pt^（δ＋） species may contribute to the high activity at elevated temperature.展开更多
Pt/Eu2O3-CeO2 materials with different Eu concentrations were prepared and applied to toluene destruction,and the remarkable promotion impact of EuOx on Pt/CeO2 can be observed.The characterization results reveal that...Pt/Eu2O3-CeO2 materials with different Eu concentrations were prepared and applied to toluene destruction,and the remarkable promotion impact of EuOx on Pt/CeO2 can be observed.The characterization results reveal that the presence of EuOx significantly enhances the redox property,lattice O concentration,and Ce3+ ratio of the Pt/CeO2 material,which facilitates the dispersion and activity of Pt active sites and thus accelerates the decomposition process of toluene.Among all catalysts,a sample with an Eu content of 2.5 at.%(Pt/EC-2.5)possesses the best catalytic activity with 0.09 vol% of toluene completely destructed at 200 ℃ under a relatively high GHSV of 50000 h^-1.The possible reaction pathway and mechanism of toluene combustion over Pt/Eu2O3-CeO2 samples are presented according to in-situ DRIFTS,which confirms that the toluene oxidation process obeys the Mars-van Krevelen mechanism with aldehydes and ketones as primary organic intermediates.展开更多
The interaction between Pt and its various supports can regulate the intrinsic electronic structure of Pt particles and their catalytic performance.Herein,Pt/CeO2 and Pt/SiC catalysts were successfully prepared via a ...The interaction between Pt and its various supports can regulate the intrinsic electronic structure of Pt particles and their catalytic performance.Herein,Pt/CeO2 and Pt/SiC catalysts were successfully prepared via a facile Pt colloidal particle deposition method,and their catalytic performance in CO oxidation was investigated.XRD,TEM,XPS and H2-TPR were used to identify the states of Pt particles on the support surface,as well as their effect on the performance of the catalysts.Formation of the Pt-O-Ce interaction is one of the factors controlling catalyst activity.Under the oxidative treatment at low temperature,the Pt-O-Ce interaction plays an important role in improving the catalytic activity.After calcining at high temperature,enhanced Pt-O-Ce interaction results in the absence of metallic Pt0 on the support surface,as evidenced by the appearance of Pt2+species.It is consistent with the XPS data of Pt/CeO2,and is the main reason behind the deactivation of the catalyst.By contrast,either no interaction is formed between Pt and SiC or Pt nanoparticles remain in the metallic Pt0 state on the SiC surface even after aging at 800℃in an oxidizing atmosphere.Thus,the Pt/SiC shows better thermal stability than Pt/CeO2.The interaction between Pt and the active support may be concluded to be essential for CO oxidation at low temperature,but strong interactions may induce serious deactivation of catalytic activity.展开更多
Pt-CeO2-ZrO2/MgO （Pt-CZ/MgO） catalysts with 0.8 wt% Pt, 3.0 wt% CeO2 and 3.0 wt% ZrO2 were prepared by wet impregnation method. Support MgO was obtained using ion exchange resin method or using commercial MgO. XRD, ...Pt-CeO2-ZrO2/MgO （Pt-CZ/MgO） catalysts with 0.8 wt% Pt, 3.0 wt% CeO2 and 3.0 wt% ZrO2 were prepared by wet impregnation method. Support MgO was obtained using ion exchange resin method or using commercial MgO. XRD, BET, SEM, TEM, DTA-TG and CO2-TPD were used to characterize the catalysts. CH4-CO2 reforming to synthesis gas （syngas） was performed to test the catalytic behavior of the catalysts. The catalyst Pt-CZ/MgO-IE（D） prepared using ion exchange resin exhibits more regular structure, smaller and more unique particle sizes, and stronger basicity than the catalyst Pt-CZ/MgO prepared from commercial MgO. At 1073 K and atmospheric pressure, Pt-CZ/MgO-IE（D） catalyst has a higher activity and greater stability than Pt-CZ/MgO catalyst for CH4-CO2 reforming reaction at high gas hourly space velocity of 36000 mL/（g.h） with a stoichiometric feed of CH4 and C02. Activity measurement and characterization results demonstrate that modification of the support using ion exchange resin method can promote the surface structural property and stability, therefore enhancing the activity and stability for CH4-CO2 reforming reaction.展开更多
基金National Natural Science Foundation of China (nos.21476226 and 21506204)National Key Projects for Fundamental Research and Development of China (2016YFB0600902)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB17020400)the Youth Innovation Promotion Association CAS for financial support
文摘Reverse water gas shift (RWGS) reaction can serve as a pivotal stage in the CO2 conversion processes, which is vital for the utilization of CO2. In this study, RWGS reaction was performed over Pt/CeO2 catalysts at the temperature range of 200-500 degrees C under ambient pressure. Compared with pure CeO2, Pt/CeO2 catalysts exhibited superior RWGS activity at lower reaction temperature. Meanwhile, the calculated TOF and E-a values are approximately the same over these Pt/CeO2 catalysts pretreated under various calcination conditions, indicating that the RWGS reaction is not affected by the morphologies of anchored Pt nanoparticles or the primary crystallinity of CeO2. TPR and XPS results indicated that the incorporation of Pt promoted the reducibility of CeO2 support and remarkably increased the content of Ce 3 + sites on the catalyst surface. Furthermore, the CO TPSR-MS signal under the condition of pure CO2 flow over Pt/CeO 2 catalyst is far lower than that under the condition of adsorbed CO2 with H-2 -assisted flow, revealing that CO2 molecules adsorbed on Ce3+ active sites have difficult in generating CO directly. Meanwhile, the adsorbed CO2 with the assistance of H-2 can form formate species easily over Ce3+ active sites and then decompose into Ce3+-CO species for CO production, which was identified by in-situ FTIR. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B. V. and Science Press. All rights reserved.
基金Project supported by the National key research and development program(2016YFC0204901)the National Natural Science Foundation of China(21576207)+1 种基金the Introduction Of Talent and Technology Cooperation Plan Of Tianjin(14RCGFGX00849)GM Global Research&Development(GAC 1539)
文摘This study was focused on the influence of active oxygen on the performance of Pt/CeO2 catalysts for CO oxidation. A series of CeO2 supports with different contents of active oxygen were obtained by adding surfactant at different synthesis steps. 0.25 wt% Pt was loaded on these CeO2 supports by incipientwetness impregnation methods. The catalysts were characterized by N2 adsorption, X-ray diffraction（XRD）, high-resolution transmission electron microscopy（HRTEM）, H2 temperature-programmed reduction（H2-TPR）, dynamic oxygen storage capacity（DOSC） and in-situ DRIFTS technologies. For S-f supports, the surfactant was added into the solution before spray-drying in the synthesis process, which facilitates more active oxygen formation on the surface of CeO2. After loading Pt, the more active oxygen on CeO2 contributes to dispersing Pt species and enhancing the CO oxidation activity. As for the aged samples,Pt-R-h shows the highest activity above 190 ℃ because of the presence of more partly oxidized Pt^（δ＋） species. Thus the activity is also influenced by the states of Pt and the Pt^（δ＋） species may contribute to the high activity at elevated temperature.
基金financially supported by the National Key R&D Program of China (2016YFC0204201)the National Natural Science Foundation of China (21677114, 21477095, 21876139)the Fundamental Research Funds for the Central Universities (xjj2017170)~~
文摘Pt/Eu2O3-CeO2 materials with different Eu concentrations were prepared and applied to toluene destruction,and the remarkable promotion impact of EuOx on Pt/CeO2 can be observed.The characterization results reveal that the presence of EuOx significantly enhances the redox property,lattice O concentration,and Ce3+ ratio of the Pt/CeO2 material,which facilitates the dispersion and activity of Pt active sites and thus accelerates the decomposition process of toluene.Among all catalysts,a sample with an Eu content of 2.5 at.%(Pt/EC-2.5)possesses the best catalytic activity with 0.09 vol% of toluene completely destructed at 200 ℃ under a relatively high GHSV of 50000 h^-1.The possible reaction pathway and mechanism of toluene combustion over Pt/Eu2O3-CeO2 samples are presented according to in-situ DRIFTS,which confirms that the toluene oxidation process obeys the Mars-van Krevelen mechanism with aldehydes and ketones as primary organic intermediates.
基金Project supported by the National Natural Science Foundation of China(21506194,21676255)the Natural Science Foundation of Zhejiang Province,China(Y16B070025).
文摘The interaction between Pt and its various supports can regulate the intrinsic electronic structure of Pt particles and their catalytic performance.Herein,Pt/CeO2 and Pt/SiC catalysts were successfully prepared via a facile Pt colloidal particle deposition method,and their catalytic performance in CO oxidation was investigated.XRD,TEM,XPS and H2-TPR were used to identify the states of Pt particles on the support surface,as well as their effect on the performance of the catalysts.Formation of the Pt-O-Ce interaction is one of the factors controlling catalyst activity.Under the oxidative treatment at low temperature,the Pt-O-Ce interaction plays an important role in improving the catalytic activity.After calcining at high temperature,enhanced Pt-O-Ce interaction results in the absence of metallic Pt0 on the support surface,as evidenced by the appearance of Pt2+species.It is consistent with the XPS data of Pt/CeO2,and is the main reason behind the deactivation of the catalyst.By contrast,either no interaction is formed between Pt and SiC or Pt nanoparticles remain in the metallic Pt0 state on the SiC surface even after aging at 800℃in an oxidizing atmosphere.Thus,the Pt/SiC shows better thermal stability than Pt/CeO2.The interaction between Pt and the active support may be concluded to be essential for CO oxidation at low temperature,but strong interactions may induce serious deactivation of catalytic activity.
基金supported by the National Natural Science Foundation of China (No. 20873013)
文摘Pt-CeO2-ZrO2/MgO （Pt-CZ/MgO） catalysts with 0.8 wt% Pt, 3.0 wt% CeO2 and 3.0 wt% ZrO2 were prepared by wet impregnation method. Support MgO was obtained using ion exchange resin method or using commercial MgO. XRD, BET, SEM, TEM, DTA-TG and CO2-TPD were used to characterize the catalysts. CH4-CO2 reforming to synthesis gas （syngas） was performed to test the catalytic behavior of the catalysts. The catalyst Pt-CZ/MgO-IE（D） prepared using ion exchange resin exhibits more regular structure, smaller and more unique particle sizes, and stronger basicity than the catalyst Pt-CZ/MgO prepared from commercial MgO. At 1073 K and atmospheric pressure, Pt-CZ/MgO-IE（D） catalyst has a higher activity and greater stability than Pt-CZ/MgO catalyst for CH4-CO2 reforming reaction at high gas hourly space velocity of 36000 mL/（g.h） with a stoichiometric feed of CH4 and C02. Activity measurement and characterization results demonstrate that modification of the support using ion exchange resin method can promote the surface structural property and stability, therefore enhancing the activity and stability for CH4-CO2 reforming reaction.
