Maxillary bone loss impairs essential functions (chewing, swallowing, speech) and gives patients a very unaesthetic appearance due to the removal of facial support tissues, leading to serious psychological consequence...Maxillary bone loss impairs essential functions (chewing, swallowing, speech) and gives patients a very unaesthetic appearance due to the removal of facial support tissues, leading to serious psychological consequences. Treatment is multidisciplinary and requires a resective surgery if the cause is tumor-related, or an additive surgery if the cause is traumatic. This article aims to show the role of making a prosthesis to restore function (chewing, swallowing, speech) and aesthetics following maxillary bone loss. We will eighter present a clinical case involving a right maxillary tumor that was surgically resected followed by radiotherapy, and subsequently rehabilitated with a maxillofacial prosthesis in the consultation and dental treatment center of the university hospital center of Casablanca.展开更多
Human vision,confined to visible wavelengths,represents a mere fraction of the electromagnetic spectrum exploited by other species.Pit vipers detect infrared radiation through specialized pit organs,integrating therma...Human vision,confined to visible wavelengths,represents a mere fraction of the electromagnetic spectrum exploited by other species.Pit vipers detect infrared radiation through specialized pit organs,integrating thermal and visual data to navigate darkness[1].Conventional retinal prosthetics,limited to visible light and requiring external power or injectable nanomaterials,fail to address this sensory deficit[2–5].展开更多
This paper presents an innovative design of a Bionic Powered Ankle Prosthesis(BPAP)utilizing a muscle recruitment mechanism-inspired clutch,aimed at achieving biomimetic simulation of ankle muscle function.To address ...This paper presents an innovative design of a Bionic Powered Ankle Prosthesis(BPAP)utilizing a muscle recruitment mechanism-inspired clutch,aimed at achieving biomimetic simulation of ankle muscle function.To address the varying stiffness requirements of the prosthesis across different gaits,the clutch dynamically switch between different rope bundle combinations.The mechanical characteristics during the load traction process of the selected flexible ropes are also studied.A mathematical model of the series elastic drive system is established.The optimization is carried out with the minimum peak power required by the motor as the optimization goal.The experimental results show that by applying a clutch with human muscle recruitment mechanism,the proposed prosthesis can achieve better energy efficiency at different speeds.展开更多
A pulse frequency modulation（PFM） circuit for retinal prosthesis,which generates electrical pulses with frequency proportional to the intensity of incident light, is presented. The fundamental characteristic of the ...A pulse frequency modulation（PFM） circuit for retinal prosthesis,which generates electrical pulses with frequency proportional to the intensity of incident light, is presented. The fundamental characteristic of the circuit is described and analyzed. The circuit is realized in 0.6μm CMOS process,and the simulation results testify to the possibility of sub-retinal implantation.展开更多
The CAD model of molar prosthesis is usually stored in standard templete library （STIr） format. A new topological structure is given based on STL format and the vertex-based entity offset algorithm is presented to r...The CAD model of molar prosthesis is usually stored in standard templete library （STIr） format. A new topological structure is given based on STL format and the vertex-based entity offset algorithm is presented to realize the rapid generation of roughing/finishing tool path for molar prosthesis. Simulation results show that the proposed algorithm prossesses characteristics of excellent stabilization, fast calculation speed and high machining accuracy.展开更多
Periprosthetic joint infection(PJI) is a devastating complication after total joint arthroplasty, occurring in approximately 1%-2% of all cases. With growing populations and increasing age, PJI will have a growing eff...Periprosthetic joint infection(PJI) is a devastating complication after total joint arthroplasty, occurring in approximately 1%-2% of all cases. With growing populations and increasing age, PJI will have a growing effect on health care costs. Many risk factors have been identified that increase the risk of developing PJI, including obesity, immune system deficiencies, malignancy, previous surgery of the same joint and longer operating time. Acute PJI occurs either postoperatively(4 wk to 3 mo after initial arthroplasty, depending on the classification system), or via hematogenous spreading after a period in which the prosthesis had functioned properly. Diagnosis and the choice of treatment are the cornerstones to success. Although different definitions for PJI have been used in the past, most are more or less similar and include the presence of a sinus tract, blood infection values, synovial white blood cell count, signs of infection on histopathological analysis and one ormore positive culture results. Debridement, antibiotics and implant retention(DAIR) is the primary treatment for acute PJI, and should be performed as soon as possible after the development of symptoms. Success rates differ, but most studies report success rates of around 60%-80%. Whether single or multiple debridement procedures are more successful remains unclear. The use of local antibiotics in addition to the administration of systemic antibiotic agents is also subject to debate, and its pro's and con's should be carefully considered. Systemic treatment, based on culture results, is of importance for all PJI treatments. Additionally, rifampin should be given in Staphylococcal PJIs, unless all foreign material is removed. The most important factors contributing to treatment failure are longer duration of symptoms, a longer time after initial arthroplasty, the need for more debridement procedures, the retention of exchangeable components, and PJI caused by Staphylococcus(aureus or coagulase negative). If DAIR treatment is unsuccessful, the following treatment option should be based on the patient health status and his or her expectations. For the best functional outcome, one- or two-stage revision should be performed after DAIR failure. In conclusion, DAIR is the obvious choice for treatment of acute PJI, with good success rates in selected patients.展开更多
As the essential technology of human-robotics interactive wearable devices,the robotic knee prosthesis can provide above-knee amputations with functional knee compensations to realize their physical and psychological ...As the essential technology of human-robotics interactive wearable devices,the robotic knee prosthesis can provide above-knee amputations with functional knee compensations to realize their physical and psychological social regression.With the development of mechanical and mechatronic science and technology,the fully active knee prosthesis that can provide subjects with actuating torques has demonstrated a better wearing performance in slope walking and stair ascent when compared with the passive and the semi-active ones.Additionally,with intelligent human-robotics control strategies and algorithms,the wearing effect of the knee prosthesis has been greatly enhanced in terms of stance stability and swing mobility.Therefore,to help readers to obtain an overview of recent progress in robotic knee prosthesis,this paper systematically categorized knee prostheses according to their integrated functions and introduced related research in the past ten years(2010−2020)regarding(1)mechanical design,including uniaxial,four-bar,and multi-bar knee structures,(2)actuating technology,including rigid and elastic actuation,and(3)control method,including mode identification,motion prediction,and automatic control.Quantitative and qualitative analysis and comparison of robotic knee prosthesis-related techniques are conducted.The development trends are concluded as follows:(1)bionic and lightweight structures with better mechanical performance,(2)bionic elastic actuation with energy-saving effect,(3)artificial intelligence-based bionic prosthetic control.Besides,challenges and innovative insights of customized lightweight bionic knee joint structure,highly efficient compact bionic actuation,and personalized daily multi-mode gait adaptation are also discussed in-depth to facilitate the future development of the robotic knee prosthesis.展开更多
A novel reconstructive prosthesis was designed with topological optimization(TO)and a lattice structure to enhance biomechanical and biological properties in the proximal tibia.The biomechanical performance was valida...A novel reconstructive prosthesis was designed with topological optimization(TO)and a lattice structure to enhance biomechanical and biological properties in the proximal tibia.The biomechanical performance was validated through finite element analysis(FEA)and biomechanical tests.The tibia with inhomogeneous material properties was reconstructed according to computed tomography images,and different components were designed to simulate the operation.Minimum compliance TO subject to a volume fraction constraint combined with a graded lattice structure was utilized to redesign the prosthesis.FEA was performed to evaluate the mechanical performances of the tibia and implants after optimization,including stress,micromotion,and strain energy.The results were analyzed by paired-samples t tests,and p<0.05 was considered significant.Biomechanical testing was used to verify the tibial stresses.Compared to the original group(OG),the TO group(TOG)exhibited lower stress on the stem,and the maximum von Mises stresses were 87.2 and 53.1 MPa,respectively,a 39.1%reduction(p<0.05).Conversely,the stress and strain energy on the tibia increased in the TOG.The maximum von Mises stress values were 16.4 MPa in the OG and 22.9 MPa in the TOG with a 39.6%increase(p<0.05),and the maximum SED value was 0.026 MPa in the OG and 0.042 MPa in the TOG,corresponding to an increase of 61.5%(p<0.05).The maximum micromotions in the distal end of the stem were 135μm in the OG and 68μm in the TOG,almost a 50%reduction.The stress curves of the biomechanical test coincided well with the FEA results.The TO approach can effectively reduce the whole weight of the prosthesis and improve the biomechanical environment of the tibia.It could also pave the way for next-generation applications in orthopedics surgery.展开更多
A common complaint after inflatable penile prosthesis surgery is reduced penile length. We previously reported how using the Coloplast Titan inflatable penile prosthesis with aggressive new length measurement techniq...A common complaint after inflatable penile prosthesis surgery is reduced penile length. We previously reported how using the Coloplast Titan inflatable penile prosthesis with aggressive new length measurement technique （NLMT） coupled with postoperative IPP rehabilitation of the implant for 1-year helped to improve patient satisfact on and erectile peni e measurements Th s is a 2 years follow-up of a prospective, three-center, study of 40 patients who underwent Titan prosthesis placement, With new length measurement technique for erectile dysfunction. Patient instructions were to inflate daily for 6 months and then inflate maximally for 1-2 h daily for 6-24 months. Fifteen penile measurements were taken before and immediately after surgery and at follow-up visits. Measurement changes were improved at 24 months as compared to immediately postoperative and at 12 months. 67.8% of subjects were satisfied with their length at 2 years, and 77% had perceived penile length that was longer （30.8%） or the same （46.2%） as prior to the surgery. 64.3% and 17.9% of subjects had increased and unchanged satisfaction, respectively, with penile length as compared to prior to penile implant surgery. All but one subject （96.5%） was satisfied with the overall function of his implant. This study suggests using the Coloplast Titan with aggressive cylinder sizing, and a postoperative penile rehabilitation inflation protocol can optimize patient satisfaction and erectile penile measurements at 2 years postimplant.展开更多
Purpose:The aim of this study is to describe and analyse the factors which influence utilization of EBPs among breast cancer patients worldwide and particularly in China.Methods:Literature searches were conducted in W...Purpose:The aim of this study is to describe and analyse the factors which influence utilization of EBPs among breast cancer patients worldwide and particularly in China.Methods:Literature searches were conducted in Wanfang,CNKI,and PubMed databses in order to identify relevant articles published in both Chinese and English up to October 2014.The phrase“external breast prosthesis”in Chinese was used to search titles,abstracts,and key words to find articles in Wanfang and CNKI electronic databases.Synonyms and related terms for external breast prosthesis were combined and used for searches performed in PubMed.Additional references were subsequently extracted from the bibliographies of all included articles and reviews.Qualitative analysis was applied in this study rather than meta-analysis.Results:The number of relevant studies published in other countries is five times greater than the literature published in China,with most articles written by Australian scientists.Based on the existing references,reconstruction,comfort,appearance,cost,mental status,and supportive information were the main factors influencing choice of treatment options by patients.Conclusion:Six main factors influencing EBP use worldwide were identified.Although the number of breast cancer cases per year is increasing at a much higher rate in China relative to the average number globally,relevant studies on Chinese patients are lacking.Thus,further studies should be undertaken in China in order to develop effective service modalities in order to improve quality of life of patients.展开更多
A new type of testicular prosthesis made of silastic with an elliptical shape to mimic a normal testis was developed by our team and submitted for patenting in China. The prosthesis was produced in different sizes to ...A new type of testicular prosthesis made of silastic with an elliptical shape to mimic a normal testis was developed by our team and submitted for patenting in China. The prosthesis was produced in different sizes to imitate the normal testis of the patient. To investigate the effects and safety of the testicular prosthesis, 20 patients receiving testicular prosthesis implantation were recruited for this study. Follow-up after 6 months revealed no complications in the patients. All the patients answered that they were satisfied with their body image and the position of the implants, 19 patients were satisfied with the size and 16 patients were satisfied with the weight. These results show that the testicular prosthesis used in this study can meet patient＇s expectations. Patients undergoing orchiectomy should be offered the option to receive a testicular prosthesis implantation. The dimensions and weight of the available prosthetic implants should be further addressed to improve patient satisfaction.展开更多
Systemic chemotherapy of breast cancer is commonly delivered as a large dose and has toxic side effects.Local chemotherapy would overcome the shortcomings of systemic reconstruction and could play an important role in...Systemic chemotherapy of breast cancer is commonly delivered as a large dose and has toxic side effects.Local chemotherapy would overcome the shortcomings of systemic reconstruction and could play an important role in breast cancer surgery according to personalized demand.The application of three-dimensional(3D)printing technology makes personalized customization possible.We designed and prepared a prosthesis containing paclitaxel(PTX)and doxorubicin(DOX)microspheres(PPDM)based on 3D printing to prevent tumor recurrence and metastasis after breast conserving surgery.Polydimethysiloxane has good biocompatibility and was used as a drug carrier in this study.The average particle size of the PTX and DOX microspheres were approximately 3.1μm and 2.2μm,respectively.The drug loading of PTX and DOX microspheres was 4.2% and 2.1%,respectively.In vitro drug release studies demonstrated that the 3D-printed prosthesis loaded with PTX and DOXmicrospheres could release the drugs continuously for more than 3 weeks and thereby suppress cancer recurrence with reduced side effects.The PTX and DOX microspheres not only exerted a synergistic effect,but also achieved a good sustained release effect.In vivo evaluation showed that the PPDM could effectively inhibit breast cancer recurrence andmetastasis inmice with breast cancer.PPDM are expected to achieve postoperative chemotherapy for breast cancer and be highly efficient to prevent local breast cancer recurrence and metastasis.展开更多
We compared erect penile length after inflatable penile prosthesis （IPP） implantation with that induced by intracavemosal injection （ICI） before surgery. A total of 11 patients with full erections induced by ICI o...We compared erect penile length after inflatable penile prosthesis （IPP） implantation with that induced by intracavemosal injection （ICI） before surgery. A total of 11 patients with full erections induced by ICI of 0.25 mL of Trimix （papaverine, phentolamine and prostaglandin E 1） at the time of penile color duplex Doppler ultrasonograpby were enrolled in this study. The patients subsequently underwent IPP implantation as the ultimate treatment for their erectile dysfunction （ED）. Erect penile length consequent to IPP implantation was measured at 6 weeks, 6 months and at I year after surgery. The Sexual Health Inventory for Men （SHIM） was administered before, and at 6 months and 1 year after IPP implantation. Erect penile length （mean ± s.c.） as induced by ICI was 13.2 ± 0.4 cm, whereas the lengths attained with IPP were 12.4 ± 0.3, 12.5 ± 0.3 and 12.5 ± 0.4 cm at the sixth week, sixth month and 1-year follow-ups, respectively. There were 0.83 ± 0.25, 0.75 ± 0.20 and 0.74 ± 0.15 cm decreases in erect penile length at 6 weeks, 6 months and 1 year, respectively, after IPP implantation when compared with that after ICI （P 〈 0.05）. The SHIM scores for patients reporting shorter penises were the same as those for patients without complaints at the 6-month and 1-year follow-ups （P 〉 0.05）. To our knowledge, this is the first study to objectively show a significant decrease in erect penile length after IPP implantation when compared with that after ICI. However, this decrease did not affect the effectiveness of IPP in treating ED.展开更多
To evaluate the current literature about how successfully periprosthetic hip joint infections can be managed by debridement and prosthesis retention.A literature search was performed through Pub Med until September 20...To evaluate the current literature about how successfully periprosthetic hip joint infections can be managed by debridement and prosthesis retention.A literature search was performed through Pub Med until September 2013.Search terms were"DAIR(debridement,antibiotics,irrigation,and retention)"alone and in combination with"hip"as well as"hip infection+prosthesis retention".A total of 11 studies reporting on 292 cases could be identified.Five different treatment modalities have been described with varying success rates(debridement-21%infection eradication rate;debridement+lavage-75%infection eradication rate;debridement,lavage,with change of modular prosthesis components-70.4%infection eradication rate;debridement,lavage,change of modular prosthesis components+vacuum-assisted closure-92.8%infection eradication rate;acetabular cup removal+spacer head onto retained stem-89.6%infection eradication rate).With regard to the postoperative antibiotic therapy,no general consensus could be drawn from the available data.Debridement,antibiotic therapy,irrigation,and prosthesis retention is an acceptable solution in the management of early and acute hematogenous periprosthetic hip joint infections.The current literature does not allow for generalization of conclusions with regard to thebest treatment modality.A large,multi-center study is required for identification of the optimal treatment of these infections.展开更多
文摘Maxillary bone loss impairs essential functions (chewing, swallowing, speech) and gives patients a very unaesthetic appearance due to the removal of facial support tissues, leading to serious psychological consequences. Treatment is multidisciplinary and requires a resective surgery if the cause is tumor-related, or an additive surgery if the cause is traumatic. This article aims to show the role of making a prosthesis to restore function (chewing, swallowing, speech) and aesthetics following maxillary bone loss. We will eighter present a clinical case involving a right maxillary tumor that was surgically resected followed by radiotherapy, and subsequently rehabilitated with a maxillofacial prosthesis in the consultation and dental treatment center of the university hospital center of Casablanca.
基金supported by the National Key Research and Development Program from Ministry of Science and Technology(No.2023YFB3208102).
文摘Human vision,confined to visible wavelengths,represents a mere fraction of the electromagnetic spectrum exploited by other species.Pit vipers detect infrared radiation through specialized pit organs,integrating thermal and visual data to navigate darkness[1].Conventional retinal prosthetics,limited to visible light and requiring external power or injectable nanomaterials,fail to address this sensory deficit[2–5].
基金supported in part by National Natural Science Foundation of China[Grant No.62203356].
文摘This paper presents an innovative design of a Bionic Powered Ankle Prosthesis(BPAP)utilizing a muscle recruitment mechanism-inspired clutch,aimed at achieving biomimetic simulation of ankle muscle function.To address the varying stiffness requirements of the prosthesis across different gaits,the clutch dynamically switch between different rope bundle combinations.The mechanical characteristics during the load traction process of the selected flexible ropes are also studied.A mathematical model of the series elastic drive system is established.The optimization is carried out with the minimum peak power required by the motor as the optimization goal.The experimental results show that by applying a clutch with human muscle recruitment mechanism,the proposed prosthesis can achieve better energy efficiency at different speeds.
文摘A pulse frequency modulation（PFM） circuit for retinal prosthesis,which generates electrical pulses with frequency proportional to the intensity of incident light, is presented. The fundamental characteristic of the circuit is described and analyzed. The circuit is realized in 0.6μm CMOS process,and the simulation results testify to the possibility of sub-retinal implantation.
文摘The CAD model of molar prosthesis is usually stored in standard templete library （STIr） format. A new topological structure is given based on STL format and the vertex-based entity offset algorithm is presented to realize the rapid generation of roughing/finishing tool path for molar prosthesis. Simulation results show that the proposed algorithm prossesses characteristics of excellent stabilization, fast calculation speed and high machining accuracy.
文摘Periprosthetic joint infection(PJI) is a devastating complication after total joint arthroplasty, occurring in approximately 1%-2% of all cases. With growing populations and increasing age, PJI will have a growing effect on health care costs. Many risk factors have been identified that increase the risk of developing PJI, including obesity, immune system deficiencies, malignancy, previous surgery of the same joint and longer operating time. Acute PJI occurs either postoperatively(4 wk to 3 mo after initial arthroplasty, depending on the classification system), or via hematogenous spreading after a period in which the prosthesis had functioned properly. Diagnosis and the choice of treatment are the cornerstones to success. Although different definitions for PJI have been used in the past, most are more or less similar and include the presence of a sinus tract, blood infection values, synovial white blood cell count, signs of infection on histopathological analysis and one ormore positive culture results. Debridement, antibiotics and implant retention(DAIR) is the primary treatment for acute PJI, and should be performed as soon as possible after the development of symptoms. Success rates differ, but most studies report success rates of around 60%-80%. Whether single or multiple debridement procedures are more successful remains unclear. The use of local antibiotics in addition to the administration of systemic antibiotic agents is also subject to debate, and its pro's and con's should be carefully considered. Systemic treatment, based on culture results, is of importance for all PJI treatments. Additionally, rifampin should be given in Staphylococcal PJIs, unless all foreign material is removed. The most important factors contributing to treatment failure are longer duration of symptoms, a longer time after initial arthroplasty, the need for more debridement procedures, the retention of exchangeable components, and PJI caused by Staphylococcus(aureus or coagulase negative). If DAIR treatment is unsuccessful, the following treatment option should be based on the patient health status and his or her expectations. For the best functional outcome, one- or two-stage revision should be performed after DAIR failure. In conclusion, DAIR is the obvious choice for treatment of acute PJI, with good success rates in selected patients.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.62003060,51975070 and 62033001)the National Key Research and Development Program of China under Grant 2020YFB1313000.
文摘As the essential technology of human-robotics interactive wearable devices,the robotic knee prosthesis can provide above-knee amputations with functional knee compensations to realize their physical and psychological social regression.With the development of mechanical and mechatronic science and technology,the fully active knee prosthesis that can provide subjects with actuating torques has demonstrated a better wearing performance in slope walking and stair ascent when compared with the passive and the semi-active ones.Additionally,with intelligent human-robotics control strategies and algorithms,the wearing effect of the knee prosthesis has been greatly enhanced in terms of stance stability and swing mobility.Therefore,to help readers to obtain an overview of recent progress in robotic knee prosthesis,this paper systematically categorized knee prostheses according to their integrated functions and introduced related research in the past ten years(2010−2020)regarding(1)mechanical design,including uniaxial,four-bar,and multi-bar knee structures,(2)actuating technology,including rigid and elastic actuation,and(3)control method,including mode identification,motion prediction,and automatic control.Quantitative and qualitative analysis and comparison of robotic knee prosthesis-related techniques are conducted.The development trends are concluded as follows:(1)bionic and lightweight structures with better mechanical performance,(2)bionic elastic actuation with energy-saving effect,(3)artificial intelligence-based bionic prosthetic control.Besides,challenges and innovative insights of customized lightweight bionic knee joint structure,highly efficient compact bionic actuation,and personalized daily multi-mode gait adaptation are also discussed in-depth to facilitate the future development of the robotic knee prosthesis.
基金National Natural Science Foundation of China[Grant Numbers 81802174,81900726&82072456]Department of Science and Technology of Jilin Province,P.R.C[Grant Numbers 20200404202YY,20200403086SF&20200201453JC]+8 种基金Jilin Province Development and Reform Commission,P.R.C[Grant Number 2018C010]Education Department of Jilin Province,P.R.C[GrantNumber JJKH20180106KJ]Administration of Traditional Chinese Medicine of Jilin Province P.R.C[Grant Number 2018115]10th Youth Project of the First Hospital of Jilin University[Grant Number JDYY102019025]Department of Finance in Jilin Province[Grant Number 2019SCZT046]Undergraduate Teaching Reform Research Project of Jilin University[Grant Number 4Z2000610852]Key training plan for outstanding young teachers of Jilin University[Grant Number 419080520253]Bethune plan of Jilin University[Grant Number 470110000692]The major participant is Qing Han.
文摘A novel reconstructive prosthesis was designed with topological optimization(TO)and a lattice structure to enhance biomechanical and biological properties in the proximal tibia.The biomechanical performance was validated through finite element analysis(FEA)and biomechanical tests.The tibia with inhomogeneous material properties was reconstructed according to computed tomography images,and different components were designed to simulate the operation.Minimum compliance TO subject to a volume fraction constraint combined with a graded lattice structure was utilized to redesign the prosthesis.FEA was performed to evaluate the mechanical performances of the tibia and implants after optimization,including stress,micromotion,and strain energy.The results were analyzed by paired-samples t tests,and p<0.05 was considered significant.Biomechanical testing was used to verify the tibial stresses.Compared to the original group(OG),the TO group(TOG)exhibited lower stress on the stem,and the maximum von Mises stresses were 87.2 and 53.1 MPa,respectively,a 39.1%reduction(p<0.05).Conversely,the stress and strain energy on the tibia increased in the TOG.The maximum von Mises stress values were 16.4 MPa in the OG and 22.9 MPa in the TOG with a 39.6%increase(p<0.05),and the maximum SED value was 0.026 MPa in the OG and 0.042 MPa in the TOG,corresponding to an increase of 61.5%(p<0.05).The maximum micromotions in the distal end of the stem were 135μm in the OG and 68μm in the TOG,almost a 50%reduction.The stress curves of the biomechanical test coincided well with the FEA results.The TO approach can effectively reduce the whole weight of the prosthesis and improve the biomechanical environment of the tibia.It could also pave the way for next-generation applications in orthopedics surgery.
文摘A common complaint after inflatable penile prosthesis surgery is reduced penile length. We previously reported how using the Coloplast Titan inflatable penile prosthesis with aggressive new length measurement technique （NLMT） coupled with postoperative IPP rehabilitation of the implant for 1-year helped to improve patient satisfact on and erectile peni e measurements Th s is a 2 years follow-up of a prospective, three-center, study of 40 patients who underwent Titan prosthesis placement, With new length measurement technique for erectile dysfunction. Patient instructions were to inflate daily for 6 months and then inflate maximally for 1-2 h daily for 6-24 months. Fifteen penile measurements were taken before and immediately after surgery and at follow-up visits. Measurement changes were improved at 24 months as compared to immediately postoperative and at 12 months. 67.8% of subjects were satisfied with their length at 2 years, and 77% had perceived penile length that was longer （30.8%） or the same （46.2%） as prior to the surgery. 64.3% and 17.9% of subjects had increased and unchanged satisfaction, respectively, with penile length as compared to prior to penile implant surgery. All but one subject （96.5%） was satisfied with the overall function of his implant. This study suggests using the Coloplast Titan with aggressive cylinder sizing, and a postoperative penile rehabilitation inflation protocol can optimize patient satisfaction and erectile penile measurements at 2 years postimplant.
文摘Purpose:The aim of this study is to describe and analyse the factors which influence utilization of EBPs among breast cancer patients worldwide and particularly in China.Methods:Literature searches were conducted in Wanfang,CNKI,and PubMed databses in order to identify relevant articles published in both Chinese and English up to October 2014.The phrase“external breast prosthesis”in Chinese was used to search titles,abstracts,and key words to find articles in Wanfang and CNKI electronic databases.Synonyms and related terms for external breast prosthesis were combined and used for searches performed in PubMed.Additional references were subsequently extracted from the bibliographies of all included articles and reviews.Qualitative analysis was applied in this study rather than meta-analysis.Results:The number of relevant studies published in other countries is five times greater than the literature published in China,with most articles written by Australian scientists.Based on the existing references,reconstruction,comfort,appearance,cost,mental status,and supportive information were the main factors influencing choice of treatment options by patients.Conclusion:Six main factors influencing EBP use worldwide were identified.Although the number of breast cancer cases per year is increasing at a much higher rate in China relative to the average number globally,relevant studies on Chinese patients are lacking.Thus,further studies should be undertaken in China in order to develop effective service modalities in order to improve quality of life of patients.
文摘A new type of testicular prosthesis made of silastic with an elliptical shape to mimic a normal testis was developed by our team and submitted for patenting in China. The prosthesis was produced in different sizes to imitate the normal testis of the patient. To investigate the effects and safety of the testicular prosthesis, 20 patients receiving testicular prosthesis implantation were recruited for this study. Follow-up after 6 months revealed no complications in the patients. All the patients answered that they were satisfied with their body image and the position of the implants, 19 patients were satisfied with the size and 16 patients were satisfied with the weight. These results show that the testicular prosthesis used in this study can meet patient＇s expectations. Patients undergoing orchiectomy should be offered the option to receive a testicular prosthesis implantation. The dimensions and weight of the available prosthetic implants should be further addressed to improve patient satisfaction.
基金the National Natural Science Foundation of China(No.81472951)for financial support of this work.
文摘Systemic chemotherapy of breast cancer is commonly delivered as a large dose and has toxic side effects.Local chemotherapy would overcome the shortcomings of systemic reconstruction and could play an important role in breast cancer surgery according to personalized demand.The application of three-dimensional(3D)printing technology makes personalized customization possible.We designed and prepared a prosthesis containing paclitaxel(PTX)and doxorubicin(DOX)microspheres(PPDM)based on 3D printing to prevent tumor recurrence and metastasis after breast conserving surgery.Polydimethysiloxane has good biocompatibility and was used as a drug carrier in this study.The average particle size of the PTX and DOX microspheres were approximately 3.1μm and 2.2μm,respectively.The drug loading of PTX and DOX microspheres was 4.2% and 2.1%,respectively.In vitro drug release studies demonstrated that the 3D-printed prosthesis loaded with PTX and DOXmicrospheres could release the drugs continuously for more than 3 weeks and thereby suppress cancer recurrence with reduced side effects.The PTX and DOX microspheres not only exerted a synergistic effect,but also achieved a good sustained release effect.In vivo evaluation showed that the PPDM could effectively inhibit breast cancer recurrence andmetastasis inmice with breast cancer.PPDM are expected to achieve postoperative chemotherapy for breast cancer and be highly efficient to prevent local breast cancer recurrence and metastasis.
文摘We compared erect penile length after inflatable penile prosthesis （IPP） implantation with that induced by intracavemosal injection （ICI） before surgery. A total of 11 patients with full erections induced by ICI of 0.25 mL of Trimix （papaverine, phentolamine and prostaglandin E 1） at the time of penile color duplex Doppler ultrasonograpby were enrolled in this study. The patients subsequently underwent IPP implantation as the ultimate treatment for their erectile dysfunction （ED）. Erect penile length consequent to IPP implantation was measured at 6 weeks, 6 months and at I year after surgery. The Sexual Health Inventory for Men （SHIM） was administered before, and at 6 months and 1 year after IPP implantation. Erect penile length （mean ± s.c.） as induced by ICI was 13.2 ± 0.4 cm, whereas the lengths attained with IPP were 12.4 ± 0.3, 12.5 ± 0.3 and 12.5 ± 0.4 cm at the sixth week, sixth month and 1-year follow-ups, respectively. There were 0.83 ± 0.25, 0.75 ± 0.20 and 0.74 ± 0.15 cm decreases in erect penile length at 6 weeks, 6 months and 1 year, respectively, after IPP implantation when compared with that after ICI （P 〈 0.05）. The SHIM scores for patients reporting shorter penises were the same as those for patients without complaints at the 6-month and 1-year follow-ups （P 〉 0.05）. To our knowledge, this is the first study to objectively show a significant decrease in erect penile length after IPP implantation when compared with that after ICI. However, this decrease did not affect the effectiveness of IPP in treating ED.
文摘To evaluate the current literature about how successfully periprosthetic hip joint infections can be managed by debridement and prosthesis retention.A literature search was performed through Pub Med until September 2013.Search terms were"DAIR(debridement,antibiotics,irrigation,and retention)"alone and in combination with"hip"as well as"hip infection+prosthesis retention".A total of 11 studies reporting on 292 cases could be identified.Five different treatment modalities have been described with varying success rates(debridement-21%infection eradication rate;debridement+lavage-75%infection eradication rate;debridement,lavage,with change of modular prosthesis components-70.4%infection eradication rate;debridement,lavage,change of modular prosthesis components+vacuum-assisted closure-92.8%infection eradication rate;acetabular cup removal+spacer head onto retained stem-89.6%infection eradication rate).With regard to the postoperative antibiotic therapy,no general consensus could be drawn from the available data.Debridement,antibiotic therapy,irrigation,and prosthesis retention is an acceptable solution in the management of early and acute hematogenous periprosthetic hip joint infections.The current literature does not allow for generalization of conclusions with regard to thebest treatment modality.A large,multi-center study is required for identification of the optimal treatment of these infections.
