Microbial consortia that catalyze chain elongation processes have been enriched using different selection strategies,for which the electron donor is an essential one.Propanol is an extraordinarily promising electron d...Microbial consortia that catalyze chain elongation processes have been enriched using different selection strategies,for which the electron donor is an essential one.Propanol is an extraordinarily promising electron donor because it can be generated from renewable resources,including lignocellulosic biomass and protein wastes.Here,propanol was proven in detail to be an efficient electron donor,enhancing the production of odd medium-chain carboxylates during chain elongation.By exploring various electron acceptors,reactor conditions,and electron donor/electron acceptor mol ratios,our study highlights that acetate is the most suitable electron acceptor for the production of both odd-and even-chain carboxylates.The optimal conditions for propanol-based chain elongation were 30℃ and pH 6,achieving 82.8%selectivity for odd-chain carboxylates.Another critical insight from our work is that a propanol/acetate mol ratio of 1:1 can minimize the inhibitory effect of propanol and maximize the yield of medium-chain carboxylates,with the highest concentration of n-heptanoate reaching 124.5 mmol C/L.This was further illustrated by 16S rRNA amplicon sequencing,which elucidated that the community composition and keystone species in a propanol-based reactor closely resembled that of the ethanol one.The dominant phylum of the propanol-based reactor,Firmicutes showed a significant positive correlation with the concentrations of n-caproate and n-valerate.Additionally,the co-occurrence of Clostridium sensu stricto 12 and Oscillibacter,known as typical chain elongators,was identified within the propanol-based reactor.These findings enhance our understanding of propanolbased chain elongation,offer guiding principles for reactor microbiota assembly,and support efficient odd medium-chain carboxylate production.展开更多
We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged stat...We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged state of graphene and/or by introducing an external electric field arising from tourmaline.A simple two‐step hydrothermal method was used to synthesize G/T/TiO2composites and poly(diallyldimethylammonium chloride)‐G/T/TiO2composites.In the photocatalytic degradation of2‐propanol(IPA),the catalytic activity of the composite containing negatively charged graphene was higher than of the composite containing positively charged graphene.The highest acetone evolution rate(223?mol/h)was achieved using the ternary composite with the optimum composition,i.e.,G0.5/T5/TiO2(0.5wt%graphene and5wt%tourmaline).The involvement of tourmaline and graphene in the composite is believed to facilitate the separation and transportation of electrons and holes photogenerated in TiO2.This synergetic effect could account for the enhanced photocatalytic activity of the G/T/TiO2composite.A mechanistic study indicated that O2??radicals and holes were the main reactive oxygen species in photocatalytic degradation of IPA.展开更多
To improve the efficiency of the carbon dioxide cycling process and to reduce the regeneration energy consumption, a sterically hindered amine of 2-amino-2-methyl-1- propranol （AMP） was investigated to determine its...To improve the efficiency of the carbon dioxide cycling process and to reduce the regeneration energy consumption, a sterically hindered amine of 2-amino-2-methyl-1- propranol （AMP） was investigated to determine its regeneration behavior as a CO2 absorbent. The CO2 absorption and amine regeneration characteristics were experimentally examined under various operating conditions. The regeneration efficiency increased from 86.2% to 98.3% during the temperature range of 358 to 403 K. The most suitable regeneration temperature for AMP was 383 K, in this experiment condition, and the regeneration efficiency of absorption/regeneration runs descended from 98.3% to 94.0%. A number of heat-stable salts （HSS） could cause a reduction in CO2 absorption capacity and regeneration efficiency. The results indicated that aqueous AMP was easier to regenerate with less loss of absorption capacity than other amines, such as, monoethanolamine （MEA）, diethanolamine （DEA）, diethylenetriamine （DETA）, and N-methyldiethanolamine （MDEA）.展开更多
The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on...The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on gaseous organic-pollutant photocatalytic degradation, we synthesized a series of TiO_2 nanoparticles with controllable phase ratios. We explored the role of the TiO_2 phase ratio on the photocatalytic activity and degradation pathway in the photodegradation of 2-propanol(IPA). We estimated the crystallite size and crystal proportions of anatase and rutile by X-ray diffraction. We used the Brunauer-Emmett-Teller method to calculate the specific surface area and Fourier transform infrared spectroscopy to characterize the surface chemistry of the samples. Our results show the photocatalytic activities of pure anatase and the sample with 8.6% rutile to be much better than those of the samples with a phase junction and pure rutile. As such, anatase is the better option for the study of photodegradation design and preparation of gas-phase organic pollutants.展开更多
In this study, the LLE data of ternary system(water + 1,6-diaminohexane + 2-methyl-1-propanol) and(water +1,6-diaminohexane + 3-methyl-1-butanol) were measured at 293.15, 303.15 and 313.15 K under atmospheric pressure...In this study, the LLE data of ternary system(water + 1,6-diaminohexane + 2-methyl-1-propanol) and(water +1,6-diaminohexane + 3-methyl-1-butanol) were measured at 293.15, 303.15 and 313.15 K under atmospheric pressure. Reliability of the experimental tie-line data was checked by empirical Hand, Othmer-Tobias and Bachman equations. Distribution coefficient(D) and selectivity(S) were calculated in order to investigate capability of the studied organic solvents for 1,6-diaminohexane extraction. The high values of separation factors demonstrated that 2-methyl-1-propanol and 3-methyl-1-butanol were applicable for this purpose. The experimental data were correlated by nonrandom two-liquid(NRTL) and universal quasi-chemical(UNIQUAC) models.The percent-root-mean-square deviation(RMSD) values for NRTL and UNIQUAC models were less than 0.15,which indicated that the experimental data have been sufficiently correlated.展开更多
In an alkaline 2-propanol solution with 5,10,15,20-tetra(4-methoxyl phenyl) porphyrin iron chloride(TOMPPFeCl) as a catalyst and oxygen as a cheap green oxidant, 2-naphthol was conversed to 2-hydroxy-\{1,4-naphthoquin...In an alkaline 2-propanol solution with 5,10,15,20-tetra(4-methoxyl phenyl) porphyrin iron chloride(TOMPPFeCl) as a catalyst and oxygen as a cheap green oxidant, 2-naphthol was conversed to 2-hydroxy-\{1,4-naphthoquinone(HNQ)\} with a yield of 62.17% and a selectivity of 100%, and the conversion number of TMOPPFeCl catalyst was 8.32/min. The catalytic oxidation products were characterized by means of UV-Vis, IR, GC-MS, ~ 1H NMR and melting point determination. In this catalytic oxidation, the catalytic activity of TMOPPFeCl was researched in detail and the reacting conditions were optimized. A possible reaction mechanism is summarized based on in situ EPR determination.展开更多
The microcosmic reaction mechanism of K2CO3-catalyzed 1-chlo-2-propanol and carbon dioxide has been investigated by density functional theory（DFT） at the GGA/PW91/DNP level.We optimize the geometric configurations o...The microcosmic reaction mechanism of K2CO3-catalyzed 1-chlo-2-propanol and carbon dioxide has been investigated by density functional theory（DFT） at the GGA/PW91/DNP level.We optimize the geometric configurations of reactants,intermediates,transition states,and products.The energy analysis calculation approves the authenticity of intermediates and transition states.According to our calculations,four feasible reaction pathways are found.The main pathway of the reaction is ReA → IMA1 → TSA1 → IMA2 → IMA5 → TSA5 → P.Besides,we also in-vestigate the reaction mechanism of 1-chlo-2-propanol and carbon dioxide without K2CO3-catalyzation by the same theory and level.The computational results indicate that the activation barrier with K2CO3-catalyzed is smaller than the activation barrier without K2CO3-catalyzed.That is to say,K2CO3 can promote the reaction to give the product in a high yield,which is in agreement with the experimental results.展开更多
A CO<sub>2</sub> capture system without supercritical CO<sub>2</sub> was optimized for mixtures of hydrophobic room temperature ionic liquids (RTILs) and propanol. We tested RTILs using bis(tri...A CO<sub>2</sub> capture system without supercritical CO<sub>2</sub> was optimized for mixtures of hydrophobic room temperature ionic liquids (RTILs) and propanol. We tested RTILs using bis(trifluoromethanesulfonyl)imide, TFSI-, anion and four quaternary ammonium cations, two quaternary phosphonium cations, and one imidazolium cation. The addition of 2-propanol into the RTILs clearly promoted the capture of normal CO<sub>2</sub>(nCO<sub>2</sub>) at ambient temperature and pressure. When combined with 2-propanol, the most efficient RTILs for nCO<sub>2</sub> capture were N-butyl-N,N,N-trimethylammonium TFSI-. This enhancement of nCO<sub>2</sub> capture was not observed in RTIL mixtures with 1-propanol or in propanol mixtures containing other phosphonium- and imidazolium-based RTILs. The torsion angle of TFSI-, which was calculated using density functional theory, is thought to be related to high nCO<sub>2</sub> capture efficiently.展开更多
The kinetics of oxidation of 1-methoxy-2-propanol and l-ethoxy-2-propanol by ditelluratocuprate（III） （DTC） in alkaline liquids has been studied spectrophotometrically in the temperature range of 293.2-313.2 K. The...The kinetics of oxidation of 1-methoxy-2-propanol and l-ethoxy-2-propanol by ditelluratocuprate（III） （DTC） in alkaline liquids has been studied spectrophotometrically in the temperature range of 293.2-313.2 K. The reaction rate showed first order dependence in DTC and fractional order with respect to l-methoxy-2-propanol or 1-ethoxy-2-propanol. It was found that the pseudo-first order rate constant kobs increased with an increase in concentration of OH- and a decrease in concentration of TeO4^2- . There is a negative salt effect. A plausible mechanism involving a pre-equilibrium of a adduct formation between the complex and 1-methoxy-2-propanol or 1-ethoxy-2-propanol was proposed. The rate equations derived from mechanism can explain all experimental observations. The activation parameters along with the rate constants of the rate-determining step were calculated.展开更多
By using spectrophotometric and potentiometric techniques the formation constants of the species formed in the systems H^＋＋ Mo（Ⅵ）＋nitrilotriacetic acid and H^＋ ＋ nitrilotriacetic acid have been determined in ...By using spectrophotometric and potentiometric techniques the formation constants of the species formed in the systems H^＋＋ Mo（Ⅵ）＋nitrilotriacetic acid and H^＋ ＋ nitrilotriacetic acid have been determined in aqueous solutions of propanol at 25 ℃ and constant ionic strength 0.1 molodm^-3 sodium perchlorate. The composition of the complex was determined by the continuous variation method. It was shown that molybdenum（Ⅵ） forms a mononuclear 1 ： 1 complex with nitrilotriacetic acid of the type MoO3L^-3 at -lg[H^＋] =5.8. The formation constants in various media were analyzed in terms of Kamlet and Taft＇s parameters. Linear relationships were observed when lg Ks was plotted versusp. Finally, the results were discussed in terms of the effect of solvent on complexation.展开更多
Recently, reactivity controlled compression ignition (RCCI) has been proposed inorder to achieve a higher thermal efficiency with lower emissions than conventional combustion. In RCCI mode, as the fuel types and their...Recently, reactivity controlled compression ignition (RCCI) has been proposed inorder to achieve a higher thermal efficiency with lower emissions than conventional combustion. In RCCI mode, as the fuel types and their combinations affects the reactivity stratificationinside cylinder, thus combustion control, in present study, iso-propanol was evaluated as lowreactivity fuel (LRF) when petroleum diesel, commercial biodiesel and their blends were highreactivity fuels. It is of great importance that iso-propanol and biodiesel be used together inRCCI mode, as they significantly affect the in-cylinder stratification due to their high octane/cetane number. Therefore, the reactivity controlled compression ignition (RCCI) combustioncharacteristics was investigated in a diesel research engine using iso-propanol, petroleumdiesel, biodiesel and their blends as fuels. Tests were conducted on varying loadings (from20% to 60% of max torque) and premixed ratios of LRF (Rp Z 0, 0.15, 0.30, 0.45, and0.60) at a constant engine speed of 2400 rpm. Results, which were compared with conventionaldiesel combustion (CDC), showed that, as the premixed ratio (Rp) of low-reactivity fuel (isopropanol) increased, ignition delay (ID) period prolonged while combustion duration (CD) and rate of pressure rise (RoPR) reduced assisted to reduce NO emissions and smoke opacity in theexhaust. NO and smoke opacity reduced simultaneously for biodiesel-propanol combinationsup to 40% under 20% load and 0.60 premixed ratio of LRF compared to CDC. Propanol premixed ratio of 0.30 at 60% load was found to be optimum concerning lowest emissions. In conventional mode, HC emissions reduced by up to 52% when biodiesel and its blends with dieselfuel are used, whereas they increased significantly in RCCI mode. According to overall results,it is concluded that RCCI performed better than CDC at entire load.展开更多
The interpretation of the ethanol analysis results in postmortem cases may be challenging when the origin of postmortem ethanol(antemortem ingestion or microbial production)is under dispute.In this study,we investigat...The interpretation of the ethanol analysis results in postmortem cases may be challenging when the origin of postmortem ethanol(antemortem ingestion or microbial production)is under dispute.In this study,we investigated the suitability of blood 1‑propanol cutoff concentration as a reliable marker for the discrimination between“positive”and“negative”for postmortem ethanol production(PEP)autopsy blood samples by performing receiver operating characteristic(ROC)analysis.The results indicated that a threshold 1‑propanol concentration of 0.104 mg/dL had an area under the curve of 0.90(standard deviation=0.03),sensitivity of 79%,and specificity of 91%for predicting PEP with 95%confidence interval.This means that the positive for PEP autopsy blood samples yield significantly differentiated PEP than approximately 90%of the controls.The estimated concentration of 1‑propanol is an applicable threshold(cutoff)value for autopsy blood 1‑propanol to discriminate between“positive”and“negative”samples for PEP.We named this threshold 1‑propanol concentration(of 0.104 mg/dL)as“1‑propanol criterion.”In an effort to test its applicability to postmortem cases,we evaluated blood ethanol and 1‑propanol from 222 postmortem cases records.The results showed that 10%of the tested samples were positive for PEP,and only a few of them were from bodies with signs of putrefaction at autopsy.This finding indicates that PEP in a corpse could take place before the appearance of obvious putrefaction.We suggest the ROC‑based calculation of the 1‑propanol cutoff concentration,at 0.104 mg/dL,as an effective method for“flagging”blood samples as positive for PEP irrespectively of the presence or not of putrefaction.展开更多
基金supported by the National Key R&D Program of China(No.2022YFC2105301)the National Natural Science Foundation of China(No.52270096).
文摘Microbial consortia that catalyze chain elongation processes have been enriched using different selection strategies,for which the electron donor is an essential one.Propanol is an extraordinarily promising electron donor because it can be generated from renewable resources,including lignocellulosic biomass and protein wastes.Here,propanol was proven in detail to be an efficient electron donor,enhancing the production of odd medium-chain carboxylates during chain elongation.By exploring various electron acceptors,reactor conditions,and electron donor/electron acceptor mol ratios,our study highlights that acetate is the most suitable electron acceptor for the production of both odd-and even-chain carboxylates.The optimal conditions for propanol-based chain elongation were 30℃ and pH 6,achieving 82.8%selectivity for odd-chain carboxylates.Another critical insight from our work is that a propanol/acetate mol ratio of 1:1 can minimize the inhibitory effect of propanol and maximize the yield of medium-chain carboxylates,with the highest concentration of n-heptanoate reaching 124.5 mmol C/L.This was further illustrated by 16S rRNA amplicon sequencing,which elucidated that the community composition and keystone species in a propanol-based reactor closely resembled that of the ethanol one.The dominant phylum of the propanol-based reactor,Firmicutes showed a significant positive correlation with the concentrations of n-caproate and n-valerate.Additionally,the co-occurrence of Clostridium sensu stricto 12 and Oscillibacter,known as typical chain elongators,was identified within the propanol-based reactor.These findings enhance our understanding of propanolbased chain elongation,offer guiding principles for reactor microbiota assembly,and support efficient odd medium-chain carboxylate production.
基金supported by the National Basic Research Program of China (973 Program,2014CB239300)the National Natural Science Foundation of China (51572191)the Natural Science Foundation of Tianjin (13JCYBJC16600)~~
文摘We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged state of graphene and/or by introducing an external electric field arising from tourmaline.A simple two‐step hydrothermal method was used to synthesize G/T/TiO2composites and poly(diallyldimethylammonium chloride)‐G/T/TiO2composites.In the photocatalytic degradation of2‐propanol(IPA),the catalytic activity of the composite containing negatively charged graphene was higher than of the composite containing positively charged graphene.The highest acetone evolution rate(223?mol/h)was achieved using the ternary composite with the optimum composition,i.e.,G0.5/T5/TiO2(0.5wt%graphene and5wt%tourmaline).The involvement of tourmaline and graphene in the composite is believed to facilitate the separation and transportation of electrons and holes photogenerated in TiO2.This synergetic effect could account for the enhanced photocatalytic activity of the G/T/TiO2composite.A mechanistic study indicated that O2??radicals and holes were the main reactive oxygen species in photocatalytic degradation of IPA.
文摘To improve the efficiency of the carbon dioxide cycling process and to reduce the regeneration energy consumption, a sterically hindered amine of 2-amino-2-methyl-1- propranol （AMP） was investigated to determine its regeneration behavior as a CO2 absorbent. The CO2 absorption and amine regeneration characteristics were experimentally examined under various operating conditions. The regeneration efficiency increased from 86.2% to 98.3% during the temperature range of 358 to 403 K. The most suitable regeneration temperature for AMP was 383 K, in this experiment condition, and the regeneration efficiency of absorption/regeneration runs descended from 98.3% to 94.0%. A number of heat-stable salts （HSS） could cause a reduction in CO2 absorption capacity and regeneration efficiency. The results indicated that aqueous AMP was easier to regenerate with less loss of absorption capacity than other amines, such as, monoethanolamine （MEA）, diethanolamine （DEA）, diethylenetriamine （DETA）, and N-methyldiethanolamine （MDEA）.
基金supported by the National Natural Science Foundation of China (Nos.21406164,21466035,51203111)the National Basic Research Program of China("973" program,Nos.2012CB720100,2014CB239300)
文摘The crystal form of TiO_2 is a crucial focus of research on the photocatalytic degradation of gaseous pollutants by TiO_2-based composite photocatalysts. To explore the synergistic effect of mixed crystalline TiO_2 on gaseous organic-pollutant photocatalytic degradation, we synthesized a series of TiO_2 nanoparticles with controllable phase ratios. We explored the role of the TiO_2 phase ratio on the photocatalytic activity and degradation pathway in the photodegradation of 2-propanol(IPA). We estimated the crystallite size and crystal proportions of anatase and rutile by X-ray diffraction. We used the Brunauer-Emmett-Teller method to calculate the specific surface area and Fourier transform infrared spectroscopy to characterize the surface chemistry of the samples. Our results show the photocatalytic activities of pure anatase and the sample with 8.6% rutile to be much better than those of the samples with a phase junction and pure rutile. As such, anatase is the better option for the study of photodegradation design and preparation of gas-phase organic pollutants.
文摘In this study, the LLE data of ternary system(water + 1,6-diaminohexane + 2-methyl-1-propanol) and(water +1,6-diaminohexane + 3-methyl-1-butanol) were measured at 293.15, 303.15 and 313.15 K under atmospheric pressure. Reliability of the experimental tie-line data was checked by empirical Hand, Othmer-Tobias and Bachman equations. Distribution coefficient(D) and selectivity(S) were calculated in order to investigate capability of the studied organic solvents for 1,6-diaminohexane extraction. The high values of separation factors demonstrated that 2-methyl-1-propanol and 3-methyl-1-butanol were applicable for this purpose. The experimental data were correlated by nonrandom two-liquid(NRTL) and universal quasi-chemical(UNIQUAC) models.The percent-root-mean-square deviation(RMSD) values for NRTL and UNIQUAC models were less than 0.15,which indicated that the experimental data have been sufficiently correlated.
文摘In an alkaline 2-propanol solution with 5,10,15,20-tetra(4-methoxyl phenyl) porphyrin iron chloride(TOMPPFeCl) as a catalyst and oxygen as a cheap green oxidant, 2-naphthol was conversed to 2-hydroxy-\{1,4-naphthoquinone(HNQ)\} with a yield of 62.17% and a selectivity of 100%, and the conversion number of TMOPPFeCl catalyst was 8.32/min. The catalytic oxidation products were characterized by means of UV-Vis, IR, GC-MS, ~ 1H NMR and melting point determination. In this catalytic oxidation, the catalytic activity of TMOPPFeCl was researched in detail and the reacting conditions were optimized. A possible reaction mechanism is summarized based on in situ EPR determination.
基金Project supported by the Natural Science Foundation of Education Committee of Chongqing (No. KJ091311)
文摘The microcosmic reaction mechanism of K2CO3-catalyzed 1-chlo-2-propanol and carbon dioxide has been investigated by density functional theory（DFT） at the GGA/PW91/DNP level.We optimize the geometric configurations of reactants,intermediates,transition states,and products.The energy analysis calculation approves the authenticity of intermediates and transition states.According to our calculations,four feasible reaction pathways are found.The main pathway of the reaction is ReA → IMA1 → TSA1 → IMA2 → IMA5 → TSA5 → P.Besides,we also in-vestigate the reaction mechanism of 1-chlo-2-propanol and carbon dioxide without K2CO3-catalyzation by the same theory and level.The computational results indicate that the activation barrier with K2CO3-catalyzed is smaller than the activation barrier without K2CO3-catalyzed.That is to say,K2CO3 can promote the reaction to give the product in a high yield,which is in agreement with the experimental results.
文摘A CO<sub>2</sub> capture system without supercritical CO<sub>2</sub> was optimized for mixtures of hydrophobic room temperature ionic liquids (RTILs) and propanol. We tested RTILs using bis(trifluoromethanesulfonyl)imide, TFSI-, anion and four quaternary ammonium cations, two quaternary phosphonium cations, and one imidazolium cation. The addition of 2-propanol into the RTILs clearly promoted the capture of normal CO<sub>2</sub>(nCO<sub>2</sub>) at ambient temperature and pressure. When combined with 2-propanol, the most efficient RTILs for nCO<sub>2</sub> capture were N-butyl-N,N,N-trimethylammonium TFSI-. This enhancement of nCO<sub>2</sub> capture was not observed in RTIL mixtures with 1-propanol or in propanol mixtures containing other phosphonium- and imidazolium-based RTILs. The torsion angle of TFSI-, which was calculated using density functional theory, is thought to be related to high nCO<sub>2</sub> capture efficiently.
文摘The kinetics of oxidation of 1-methoxy-2-propanol and l-ethoxy-2-propanol by ditelluratocuprate（III） （DTC） in alkaline liquids has been studied spectrophotometrically in the temperature range of 293.2-313.2 K. The reaction rate showed first order dependence in DTC and fractional order with respect to l-methoxy-2-propanol or 1-ethoxy-2-propanol. It was found that the pseudo-first order rate constant kobs increased with an increase in concentration of OH- and a decrease in concentration of TeO4^2- . There is a negative salt effect. A plausible mechanism involving a pre-equilibrium of a adduct formation between the complex and 1-methoxy-2-propanol or 1-ethoxy-2-propanol was proposed. The rate equations derived from mechanism can explain all experimental observations. The activation parameters along with the rate constants of the rate-determining step were calculated.
文摘By using spectrophotometric and potentiometric techniques the formation constants of the species formed in the systems H^＋＋ Mo（Ⅵ）＋nitrilotriacetic acid and H^＋ ＋ nitrilotriacetic acid have been determined in aqueous solutions of propanol at 25 ℃ and constant ionic strength 0.1 molodm^-3 sodium perchlorate. The composition of the complex was determined by the continuous variation method. It was shown that molybdenum（Ⅵ） forms a mononuclear 1 ： 1 complex with nitrilotriacetic acid of the type MoO3L^-3 at -lg[H^＋] =5.8. The formation constants in various media were analyzed in terms of Kamlet and Taft＇s parameters. Linear relationships were observed when lg Ks was plotted versusp. Finally, the results were discussed in terms of the effect of solvent on complexation.
基金The Scientific and Technological Research Council of Turkey(TUBITAK)is greatly acknowledgment for financial support with project numbered 118M650.
文摘Recently, reactivity controlled compression ignition (RCCI) has been proposed inorder to achieve a higher thermal efficiency with lower emissions than conventional combustion. In RCCI mode, as the fuel types and their combinations affects the reactivity stratificationinside cylinder, thus combustion control, in present study, iso-propanol was evaluated as lowreactivity fuel (LRF) when petroleum diesel, commercial biodiesel and their blends were highreactivity fuels. It is of great importance that iso-propanol and biodiesel be used together inRCCI mode, as they significantly affect the in-cylinder stratification due to their high octane/cetane number. Therefore, the reactivity controlled compression ignition (RCCI) combustioncharacteristics was investigated in a diesel research engine using iso-propanol, petroleumdiesel, biodiesel and their blends as fuels. Tests were conducted on varying loadings (from20% to 60% of max torque) and premixed ratios of LRF (Rp Z 0, 0.15, 0.30, 0.45, and0.60) at a constant engine speed of 2400 rpm. Results, which were compared with conventionaldiesel combustion (CDC), showed that, as the premixed ratio (Rp) of low-reactivity fuel (isopropanol) increased, ignition delay (ID) period prolonged while combustion duration (CD) and rate of pressure rise (RoPR) reduced assisted to reduce NO emissions and smoke opacity in theexhaust. NO and smoke opacity reduced simultaneously for biodiesel-propanol combinationsup to 40% under 20% load and 0.60 premixed ratio of LRF compared to CDC. Propanol premixed ratio of 0.30 at 60% load was found to be optimum concerning lowest emissions. In conventional mode, HC emissions reduced by up to 52% when biodiesel and its blends with dieselfuel are used, whereas they increased significantly in RCCI mode. According to overall results,it is concluded that RCCI performed better than CDC at entire load.
文摘The interpretation of the ethanol analysis results in postmortem cases may be challenging when the origin of postmortem ethanol(antemortem ingestion or microbial production)is under dispute.In this study,we investigated the suitability of blood 1‑propanol cutoff concentration as a reliable marker for the discrimination between“positive”and“negative”for postmortem ethanol production(PEP)autopsy blood samples by performing receiver operating characteristic(ROC)analysis.The results indicated that a threshold 1‑propanol concentration of 0.104 mg/dL had an area under the curve of 0.90(standard deviation=0.03),sensitivity of 79%,and specificity of 91%for predicting PEP with 95%confidence interval.This means that the positive for PEP autopsy blood samples yield significantly differentiated PEP than approximately 90%of the controls.The estimated concentration of 1‑propanol is an applicable threshold(cutoff)value for autopsy blood 1‑propanol to discriminate between“positive”and“negative”samples for PEP.We named this threshold 1‑propanol concentration(of 0.104 mg/dL)as“1‑propanol criterion.”In an effort to test its applicability to postmortem cases,we evaluated blood ethanol and 1‑propanol from 222 postmortem cases records.The results showed that 10%of the tested samples were positive for PEP,and only a few of them were from bodies with signs of putrefaction at autopsy.This finding indicates that PEP in a corpse could take place before the appearance of obvious putrefaction.We suggest the ROC‑based calculation of the 1‑propanol cutoff concentration,at 0.104 mg/dL,as an effective method for“flagging”blood samples as positive for PEP irrespectively of the presence or not of putrefaction.
