Propagated sensation along the meridian can occur when acupoints are stimulated by acupuncture or electrical impulses. In this study, participants with notable propagated sensation along the me- ridian were given elec...Propagated sensation along the meridian can occur when acupoints are stimulated by acupuncture or electrical impulses. In this study, participants with notable propagated sensation along the me- ridian were given electro-acupuncture at the Jianyu （LI15） acupoint of the large intestine meridian. When participants stated that the sensation reached the back of their hand, reguJar nervous system action discharge was examined using a physiological recording electrode placed on the superficial branch of the radial nerve. The topographical maps of brain-evoked potential in the primary cortical somatosensory area were also detected. When Guangming （GB37） acupoint in the lower limb and Hegu （LI4） acupoint in the upper limb were stimulated, subjects without propagated sensation along the meridian exhibited a high potential reaction in the corresponding area of the brain cortical somatosensory area. For subjects with a notable propagated sensation along the meridian, the re- action area was larger and extended into the face representative area. These electrophysiological measures directly prove the existence of propagated sensation along the meridian, and the periph- eral stimulated site is consistent with the corresponding primary cortical somatosensory area, which presents a high potential reaction.展开更多
The peripheral driver stimulating theory states that as a driver passes along a certain meridian during acupuncture; the driver provokes nerve sense devices along the meridian, resulting in the nerve impulse entering ...The peripheral driver stimulating theory states that as a driver passes along a certain meridian during acupuncture; the driver provokes nerve sense devices along the meridian, resulting in the nerve impulse entering the central nervous system. Accordingly, volunteers have reported propagated sensations along the meridians （PSM）. The present study was designed to utilize a cortical somatosensory-evoked potential （CSEP） topographic map for determining whether stimulation expansion occurs in somatosensory area I when sensation was provoked in individuals with obvious PSM. The sensation was blocked by mechanical compression, and the sensation was imitated in individuals without PSM. Results revealed a red, high-potential signal in the representative area of the lower limbs in individuals with obvious PSM symptoms when the Gall Bladder Meridian （GBM） sensation passed to the head and face. This representative area was near the middle line of the CSEP topographic map, and a red, high-potential signal, which jumps over the representative area of the upper limbs, also appeared in the representative face area, which was at the external region of the CSEP topographic map. However, in individuals exhibiting no PSM, only a red high-potential signal appeared in the representative lower limb area. When Hegu （LI 4） was stimulated in individuals without PSM, an obvious evoked response appeared only in the representative upper limb area. However, when Hegu was stimulated in individuals exhibiting PSM, the response area was larger in the representative upper limb area and extended to the representative face area. When Guangrning （GB 37） was stimulated in PSM individuals, the face representation response disappeared and was confined to a foot representation of the somatosensory area I when PSM was blocked by mechanical pressure. Results suggested that mechanical compression blocked PSM, and corresponding changes were exhibited in the CSEP topographic map. These results provide compelling evidence for the hypothesis that peripheral driver stimulation is the key element in producing PSM.展开更多
The southern continental margin of the South China Sea has documented multiphase continental rifting corresponding to the propagation of seafloor spreading.Here we investigate three multi-channel seismic reflection pr...The southern continental margin of the South China Sea has documented multiphase continental rifting corresponding to the propagation of seafloor spreading.Here we investigate three multi-channel seismic reflection profiles across different segments of the Dangerous Grounds with a NE-SW direction.Stratigraphic correlation reveals that the Cenozoic tectono-stratigraphic framework in the Dangerous Grounds is featured with diachronous rifting,which records the successive spreading of East Subbasin and Southwest Subbasin,South China Sea.By reconstructing the tectono-sedimentary evolution history in different segments,we combine the quantification of the brittle extension,tectonic subsidence,as well as the crustal thinning.Results provide evidence that the extensional stress migrated from northeast to southwest with the progressive propagation of the seafloor spreading in the oceanic basin.Besides,the impact of the tectonic propagation persists even after the cessation of seafloor spreading,evidenced by a longer stretching duration in the West-Dangerous Grounds than that in the eastern area.Moreover,a temporary syn-rift subsidence delay synchronously to the spreading of the adjacent oceanic basin is observed along the southern margin.This observation proves the secondary mantle convection during the seafloor spreading in the southern continental margin,which is related to the propagating rift.展开更多
Modern satellite systems are generally designed to fulfill multiphase-missions. Component /subsystem redundancies are commonly used to achieve high reliability and long life of modern satellite systems. These characte...Modern satellite systems are generally designed to fulfill multiphase-missions. Component /subsystem redundancies are commonly used to achieve high reliability and long life of modern satellite systems. These characteristics have leaded to a critical issue of reliability analysis of satellites that is how to deal with the reliability analysis with multiphase-missions and propagated failures of redundant components. Traditional methods based on the binary decision diagram( BDD) can hardly cope with these issues efficiently. Accordingly, a recursive algorithm method was introduced to facilitate the reliability analysis of satellites. This method was specified for the analysis of static fault tree and it was implemented by generating combination of component failures and carrying out a backward recursive algorithm. The effectiveness of the proposed method was demonstrated through the reliability analysis of a multiphase satellite system with propagated failures.The major advantage of the proposed method is that it does not need composition of BDD and its computational process is automated.展开更多
Heterosis refers to hybrids that exhibit greater vigor in biomass,yield,and adaptation compared with their parents.Nearly all annual crops exhibit heterosis to a certain extent[1].Heterosis is widely utilized in vario...Heterosis refers to hybrids that exhibit greater vigor in biomass,yield,and adaptation compared with their parents.Nearly all annual crops exhibit heterosis to a certain extent[1].Heterosis is widely utilized in various crops including rice,maize,vegetables,and certain perennials[2];however,it cannot be stably inherited in subsequent seasons because of segregation,and hybrid seed production requires complex techniques and substantial resource consumption during every season[3].Apomixis is an asexual mode of seed reproduction that is observed in over 400 plant species.It produces clonal seeds and offspring that are genetically identical to the maternal parent[4].This mechanism has been proposed to revolutionize crop breeding by enabling the rapid fixation and effective utilization of heterosis and elite heterozygous genotypes[5].展开更多
Propagated sensation along meridians （PSM） is a phenomenon that a sensation moves along meridians during stimulation of an acupoint. PSM has an appearance rate of 1.3% among people and have characteristics of low sp...Propagated sensation along meridians （PSM） is a phenomenon that a sensation moves along meridians during stimulation of an acupoint. PSM has an appearance rate of 1.3% among people and have characteristics of low speed, going toward afflicted sites and being blocked by physical pressure which is difficult to be explained by known neural and blood transmission. Volume transmission （VT） is a widespread mode of intercellular communication in the central nervous system that occurs in the extracellular fluid and in the cerebrospinal fluid. VT signals moves from source to target cells via energy gradients leading to diffusion and convection （flow） which is slow, long distance and much less space filling. VT channel diffuse forming a plexus in the extracellular space with two parameters of volume fraction and tortuosity. Some experiments showed an information transmission between adjacent and distant acupoints along meridians cross spinal segments. This process is a cross-excitation between peripheral nerve terminals which is related to nonsynaptic transmission. Some neurotransmitters or neuropeptides such as glutamate, adenosine triphosphate （ATP） and neuropeptide such as substance P, neurokinin A and calcitonin gene-related peptide relate with the cross-excitation which can be regards as VT signals. Comparing the characteristics of PSM and VT, many similar aspects can be found leading to an assumption that PSM is a process of VT in peripheral tissue along meridians. The reason why VT signals transmit along meridians is that the meridian is rich in interstitial fluid under the condition of low hydraulic resistance which has been proven experimentally. According to Darcy＇s law which descript the flow of interstitial fluid and conservation equation, interstitial fluid will move toward meridians and flow along meridians that restrict the VT signals within the channel and accelerate the flow according to Fick＇s diffusion law. During the process, a degranulation of histamine from mast cells happens on the route which can expand capillary and increase the blood perfusion and interstitial fluid which had already been observed. The mechanism of PSM is featured by alternative axon reflex （wired transmission, WT） and VT in peripheral tissue along meridians, sending simultaneously a continuous sensate signal to control nerve system which can be felt like a PSM.展开更多
Objective： To investigate the electrical signals propagated along Foot Taiyang Bladder Meridian （BL） in a rat model. Methods： The experiments were performed on Dark-Agouti （DA）, DA.lU and Sprague Dawley （SD） r...Objective： To investigate the electrical signals propagated along Foot Taiyang Bladder Meridian （BL） in a rat model. Methods： The experiments were performed on Dark-Agouti （DA）, DA.lU and Sprague Dawley （SD） rats. The antidromic electrical stimulation was applied on the nerve innervating ＂Pishu＂ （BL 20） to mimic the acupoint electro-acupuncture （EA）. The activities recording from adjacent nerve innervating acupoint ＂Danshu＂ （BL 19） or ＂Weishu＂ （BL 21） were recorded as indics for acupoint, including the mechanical threshold and discharge rate. Results： After mimic EA on BL 20, C and A $ units from adjacent BL 19 or BL 21 were sensitized including the decrease in mechanical threshold and increase in discharge rates in DA, DA.1U and SD rats, especially in DA rats. The average discharge rate increased from 2.40± 0.26 to 6.06± 0.55 and from 1.92±0.42 to 6.17± 1.10 impulse/min （P〈0.01）, and the mechanical threshold decreased from 0.52 ± 0.12 to 0.24 ± 0.05 and from 0.27±0.02 to 0.16±0.01 mmol/L （P〈0.01） in C （n=15） and Aδ （n=18） units in DA rats. The net change in discharge rates from C units were 152.5%, 144.7% and 42.4% in DA, DA.1U and SD rats, respectively, among which DA rat＇s was the highest （P〈0.05）. In A δ units, the net change in DA rats were also the highest （221.5%, 139.2% and 49.2% in DA, DA.lU and SD rats）. Conclusions： These results showed that mimic acupoint EA activated adjacent acupoints along BL in three rat strains, which might be related to propagated sensation along meridians （PSM）. In addition, DA rats were more sensitive and might be a good model animal for PSM research.展开更多
Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads ...Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.展开更多
Supercritical CO_(2)(SC-CO_(2))fracturing stands out a promising waterless stimulation technique in the development of unconventional resources.While numerous studies have delved into the inducedfracture mechanism of ...Supercritical CO_(2)(SC-CO_(2))fracturing stands out a promising waterless stimulation technique in the development of unconventional resources.While numerous studies have delved into the inducedfracture mechanism of SC-CO_(2),the small scale of rock samples and synthetic materials used in many studies have limited a comprehensive understanding of fracture propagation in unconventional formations.In this study,cubic tight sandstone samples with dimensions of 300 mm were employed to conduct SC-CO_(2)fractu ring experiments under true-triaxial stre ss conditions.The spatial morphology and quantitative attributes of fracture induced by water and SC-CO_(2)fracturing were compared,while the impact of in-situ stress on fracture propagation was also investigated.The results indicate that the SCCO_(2)fracturing takes approximately ten times longer than water fracturing.Furthermore,under identical stress condition,the breakdown pressure(BP)for SC-CO_(2)fracturing is nearly 25%lower than that for water fracturing.A quantitative analysis of fracture morphology reveals that water fracturing typically produces relatively simple fracture pattern,with the primary fracture distribution predominantly controlled by bedding planes.In contrast,SC-CO_(2)fracturing results in a more complex fracture morphology.As the differential of horizontal principal stress increases,the BP for SC-CO_(2)fractured rock exhibits a downward trend,and the induced fracture morphology becomes more simplified.Moreover,the presence of abnormal in-situ stress leads to a further increase in the BP for SC-CO_(2)fracturing,simultaneously enhancing the development of a more conductive fracture network.These findings provide critical insights into the efficiency and behavior of SC-CO_(2)fracturing in comparison to traditional water-based fracturing,offering valuable implication for its potential applications in unconventional reservoirs.展开更多
Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks be...Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.展开更多
The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of ke...The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of key fracture parameters,such as the fracture height and width,are particularly important to ensure efficient oilfield development and precise fracture diagnosis.This study utilized the optical frequency domain reflectometer(OFDR)technique in physical simulation experiments to monitor fractures during indoor true triaxial hydraulic fracturing experiments.The results indicate that the distributed fiber optic strain monitoring technology can efficiently capture the initiation and expansion of fractures.In horizontal well monitoring,the fiber strain waterfall plot can be used to interpret the fracture width,initiation location,and expansion speed.The fiber response can be divided into three stages:strain contraction convergence,strain band formation,and postshutdown strain rate reversal.When the fracture does not contact the fiber,a dual peak strain phenomenon occurs in the fiber and gradually converges as the fracture approaches.During vertical well monitoring in adjacent wells,within the effective monitoring range of the fiber,the axial strain produced by the fiber can represent the fracture height with an accuracy of 95.6%relative to the actual fracture height.This study provides a new perspective on real-time fracture monitoring.The response patterns of fiber-induced strain due to fractures can help us better understand and assess the dynamic fracture behavior,offering significant value for the optimization of oilfield development and fracture diagnostic techniques.展开更多
This study primarily investigates the rock fracture mechanism of bottom cushion layer blasting and explores the effects of the bottom cushion layer on rock fragmentation.It involves analyses of the evolution patterns ...This study primarily investigates the rock fracture mechanism of bottom cushion layer blasting and explores the effects of the bottom cushion layer on rock fragmentation.It involves analyses of the evolution patterns of blasting stress,characteristics of crack distribution,and rock fracture features in the specimens.First,blasting model experiments were carried out using the dynamic caustics principle to investigate the influence of bottom cushion layers and initiation methods on the integrity of the bottom rock mass.The experimental results indicate that the combined use of bottom cushion layers and inverse initiation effectively protects the integrity of the bottom rock mass.Subsequently,the process of stress wave propagation and dynamic crack propagation in rocks was simulated using the continuum-discontinuum element method(CDEM)and the Landau explosion source model,with varying thicknesses of bottom cushion layers.The numerical simulation results indicate that with increasing cushion thickness,the absorption of energy generated by the explosion becomes more pronounced,resulting in fewer cracks in the bottom rock mass.This illustrates the positive role of the cushion layer in protecting the integrity of the bottom rock mass.展开更多
Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical e...Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical experimental measurement and numerical simulation pose research challenges.This study focuses on the ice load of a cylinder structure breaking upward through the ice sheet form underneath in the Small Ice Model Basin of China Ship Scientific Research Center(CSSRC SIMB).A high-speed camera system was employed to observe the ice sheet failure during the tests,in which,with the loading position as center,local radial cracks and circumferential cracks were generated.A load sensor was used to measure the overall ice load during this process.Meanwhile,a numerical model was developed using LS-DYNA for validation and comparison.With this model,numerical simulation was conducted under various ice thicknesses and upgoing speeds to analyze the instantaneous curves of ice load.The calculation results were statistically analyzed under different working conditions to determine the influence of the factors on the ice load of the cylinder.The study explores the measurement method about ice load of objects vertically breaking through model ice sheet and is expected to provide some fundamental insights into the safety design of underwater structures operating in ice waters.展开更多
The crack initiation and early propagation are of great significance to the overall fatigue life of material.In order to investigate the anisotropic fracture behavior of laser metal deposited Ti-6Al-4V alloy(LMD Ti64)...The crack initiation and early propagation are of great significance to the overall fatigue life of material.In order to investigate the anisotropic fracture behavior of laser metal deposited Ti-6Al-4V alloy(LMD Ti64)during the early stage,the fourpoint bending fatigue test was carried out on specimens of three different directions,as well as the forged specimens.The results indicate the anisotropic crack initiation and early propagation of LMD Ti64.The direction perpendicular to the deposition direction exhibits a better fatigue resistance than the other two.The crack initiation position and propagation path are dominated by the microstructure in the vicinity of U-notch.LMD Ti64 has a typical small crack effect,and the early crack propagation velocities in three directions are similar.Affected by the slip system of LMD Ti64,secondary cracks frequently occur,which are often found to have an angle of 60°to the main crack.The electron backscatter diffraction analysis indicates that LMD Ti64 has preferred orientations,i.e.,strong 0001//Z texture and 001//Z texture.Their crystallographic orientation will change as the direction of columnarβgrains turns over,resulting in the fatigue anisotropy of LMD Ti64 in crack initiation and early crack propagation process.展开更多
The acoustic wave propagation in gas-saturated double-porosity materials composed of a microporous matrix and mesopores with arrays of plate-type resonators is investigated.A macroscopic description,established with t...The acoustic wave propagation in gas-saturated double-porosity materials composed of a microporous matrix and mesopores with arrays of plate-type resonators is investigated.A macroscopic description,established with the two-scale asymptotic homogenization method,evidences the combined effect of inner resonances on the acoustic properties of the respective effective visco-thermal fluid.One type of resonance originates from strong pore-scale fluid-structure interaction,while the other one arises from pressure diffusion.These phenomena respectively cause weakly and highly damped resonances,which are activated by internal momentum or mass sources,and can largely influence,depending on the material's morphology,either the effective fluid's dynamic density,compressibility,or both.We introduce semi-analytical models to illustrate the key effective properties of the studied multiscale metamaterials.The results provide insights for the bottom-up design of multiscale acoustic metamaterials with exotic behaviors,such as the negative,very slow,or supersonic phase velocity,as well as sub-wavelength bandgaps.展开更多
The approximately 3000 km long Tan-Lu fault zone(TLFZ)in East Asia is the longest continental strike-slip fault zone in the world and exemplifies how such a fault zone forms and propagates on a continental scale.Struc...The approximately 3000 km long Tan-Lu fault zone(TLFZ)in East Asia is the longest continental strike-slip fault zone in the world and exemplifies how such a fault zone forms and propagates on a continental scale.Structural and geochronological data from the TLFZ and surrounding regions indicate that the fault zone originated as NE/SW-striking sinistral ductile shear zones along an oblique continental convergence margin during the Triassic indentation collision between the North China Craton and the Yangtze Block.The Triassic fault zone,with a total length of about 720 km between the Dabie and Sulu orogens,exhibited an apparent sinistral offset of approximately 300 km along the TLFZ.The second stage of sinistral movement occurred in the earliest Late Jurassic,reactivating the pre-existing southern segment and propagating northwards to the southern coastline of present-day Bohai Bay,as well as forming a significant portion of the Dunhua-Mishan fault zone.The third stage of sinistral movement,in the earliest Early Cretaceous,was the most intense strike-slip movement of the Mesozoic,leading to the complete linkage of the TLFZ.This stage included further northward propagation of the southern-middle segment,both southward and northward propagation of the Dunhua-Mishan fault zone,as well as the formation of the entire Yilan-Yitong fault zone.The fourth stage,in the earliest Late Cretaceous,involved the reactivation of the entire TLFZ.Following its Triassic origin due to the indentation collision,the subduction of the Paleo-Pacific Plate and the subduction and closure of the Mongol-Okhotsk Ocean were responsible for the multi-stage sinistral movements from the Late Jurassic to the Cretaceous.The evolution of the TLFZ demonstrates that a continental-scale strike-slip fault zone(>1000 km long)forms through multiple stages of propagation and linkage in dynamic settings of plate convergence.展开更多
The southern part of East Siberia(SES)is highly vulnerable to flooding caused by the extreme precipitation events(EPEs)during summer.Building on previously detected EPEs in SES and Mongolia,we examined wave propagatio...The southern part of East Siberia(SES)is highly vulnerable to flooding caused by the extreme precipitation events(EPEs)during summer.Building on previously detected EPEs in SES and Mongolia,we examined wave propagation patterns for two periods:1982-98 and 1999-2019.Our analysis revealed distinct wave train configurations and geopotential anomalies preceding EPEs,with an increase in wave activity flux across the Northern Hemisphere,followed by a subsequent decrease during EPEs.Consequently,Eastern Siberia has experienced a significant rise in wave activity.Based on geopotential anomalies over Central Siberia accompanying EPEs,we identified two main types.The first,the ridge type,is predominant during the first period and features a meridional contrast with a positive geopotential(and temperature)anomaly over Central Siberia and a negative anomaly over the subtropical regions along the same longitude.The second type,termed the trough type,is more typical for the second period.It involves either a negative geopotential anomaly or the zonal proximity of positive and negative geopotential anomalies over Central Siberia.The trough type,marked by zonally oriented anomalies in geopotential and temperature,results in a more pronounced temperature decrease before EPEs and significant zonal temperature contrasts.Further,it is related to more stationary waves over Northern Eurasia,with persistent positive geopotential anomalies over Europe linked to quasi-stationary troughs over Central Siberia and positive anomalies east of Lake Baikal.Our findings align with shifts in boreal summer teleconnection patterns,reflecting significant changes in wave propagation patterns that have occurred since the late 1990s.展开更多
The mainstream method for extracting shale gas involves hydraulic fracturing to create fracture networks.However,as extraction depth increases,notable issues such as rapid production decline,low recovery rates,high wa...The mainstream method for extracting shale gas involves hydraulic fracturing to create fracture networks.However,as extraction depth increases,notable issues such as rapid production decline,low recovery rates,high water consumption,and resource waste become apparent.Identifying new and efficient auxiliary rock-breaking technologies is crucial for overcoming these challenges.The laser,successfully utilized in industrial production,medical treatment,and technological research,offers unique features such as good directionality,coherence,and high energy density,providing novel possibilities for addressing the limitations of existing deep reservoir transformation.This research focuses on a novel laser-assisted rock-breaking technology,with shale featuring different bedding angles as the subject of investigation.The investigation methodically explored how shale responded to thermal fracture at high temperatures when exposed to laser irradiation with different spot diameter.It investigates the spatiotemporal evolution characteristics of the shale temperature field under laser irradiation,the propagation features of cracks on shale surface,and the physicochemical fracture mechanisms.The research yields the following results:(1)The region of thermal influence of the irradiation surface can be divided into three regions based on the change of rise curve of temperature in the shale surface.(2)Based on the scanning electron microscopy(SEM)testing,combined with the macroscopic and microscopic morphological characteristics of shale fracture surfaces,it reveals significantly distinct zoning characteristics in the roughness of the rock sample’s fracture surfaces after laser irradiation.(3)The thermal fracturing process of shale under laser irradiation involves chemical reactions of constituent minerals and stress generated by the thermal expansion of shale oil in the reservoir.(4)The damage and fracture of shale under the irradiation of laser show significant bedding effect,and there are three modes of rock sample failure:Pattern T(thermal failure),Pattern T-B(thermal and bedding synergistic failure),and Pattern B(bedding failure).The research findings presented in this article serve as a foundation and reference for the theory and technology of laser-assisted shale gas extraction.展开更多
The surface of a high-speed vehicle reentering the atmosphere is surrounded by plasma sheath.Due to the influence of the inhomogeneous flow field around the vehicle,understanding the electromagnetic properties of the ...The surface of a high-speed vehicle reentering the atmosphere is surrounded by plasma sheath.Due to the influence of the inhomogeneous flow field around the vehicle,understanding the electromagnetic properties of the plasma sheath can be challenging.Obtaining the electron density of the plasma sheath is crucial for understanding and achieving plasma stealth of vehicles.In this work,the relationship between electromagnetic wave attenuation and electron density is deduced theoretically.The attenuation distribution along the propagation path is found to be proportional to the integral of the plasma electron density.This result is used to predict the electron density profile.Furthermore,the average electron density is obtained using a back-propagation neural network algorithm.Finally,the spatial distribution of the electron density can be determined from the average electron density and the normalized derivative of attenuation with respect to the propagation depth.Compared to traditional probe measurement methods,the proposed approach not only improves efficiency but also preserves the integrity of the plasma environment.展开更多
基金supported by the General Project of the National Natural Science Foundation of China,No.30973720the Natural Science Foundation of Fujian Province in China,No.2011J01192Free Topics of Fujian Provincial Science & Technology Ministry in China,No.2012fjzyyk-6
文摘Propagated sensation along the meridian can occur when acupoints are stimulated by acupuncture or electrical impulses. In this study, participants with notable propagated sensation along the me- ridian were given electro-acupuncture at the Jianyu （LI15） acupoint of the large intestine meridian. When participants stated that the sensation reached the back of their hand, reguJar nervous system action discharge was examined using a physiological recording electrode placed on the superficial branch of the radial nerve. The topographical maps of brain-evoked potential in the primary cortical somatosensory area were also detected. When Guangming （GB37） acupoint in the lower limb and Hegu （LI4） acupoint in the upper limb were stimulated, subjects without propagated sensation along the meridian exhibited a high potential reaction in the corresponding area of the brain cortical somatosensory area. For subjects with a notable propagated sensation along the meridian, the re- action area was larger and extended into the face representative area. These electrophysiological measures directly prove the existence of propagated sensation along the meridian, and the periph- eral stimulated site is consistent with the corresponding primary cortical somatosensory area, which presents a high potential reaction.
基金the National Natural Science Foundation of China, No.30973720the Science Research Foundation of Ministry of Health & United Fujian Provincial Health and Education Project for Tackling the Key Research of China, No.WKJ2005-2-004
文摘The peripheral driver stimulating theory states that as a driver passes along a certain meridian during acupuncture; the driver provokes nerve sense devices along the meridian, resulting in the nerve impulse entering the central nervous system. Accordingly, volunteers have reported propagated sensations along the meridians （PSM）. The present study was designed to utilize a cortical somatosensory-evoked potential （CSEP） topographic map for determining whether stimulation expansion occurs in somatosensory area I when sensation was provoked in individuals with obvious PSM. The sensation was blocked by mechanical compression, and the sensation was imitated in individuals without PSM. Results revealed a red, high-potential signal in the representative area of the lower limbs in individuals with obvious PSM symptoms when the Gall Bladder Meridian （GBM） sensation passed to the head and face. This representative area was near the middle line of the CSEP topographic map, and a red, high-potential signal, which jumps over the representative area of the upper limbs, also appeared in the representative face area, which was at the external region of the CSEP topographic map. However, in individuals exhibiting no PSM, only a red high-potential signal appeared in the representative lower limb area. When Hegu （LI 4） was stimulated in individuals without PSM, an obvious evoked response appeared only in the representative upper limb area. However, when Hegu was stimulated in individuals exhibiting PSM, the response area was larger in the representative upper limb area and extended to the representative face area. When Guangrning （GB 37） was stimulated in PSM individuals, the face representation response disappeared and was confined to a foot representation of the somatosensory area I when PSM was blocked by mechanical pressure. Results suggested that mechanical compression blocked PSM, and corresponding changes were exhibited in the CSEP topographic map. These results provide compelling evidence for the hypothesis that peripheral driver stimulation is the key element in producing PSM.
基金financially supported by the Open Fund of Hubei Key Laboratory of Marine Geological Resources(No.MGR202004)the National Natural Science Foundation of China(Nos.41890811,41676027,41906070)。
文摘The southern continental margin of the South China Sea has documented multiphase continental rifting corresponding to the propagation of seafloor spreading.Here we investigate three multi-channel seismic reflection profiles across different segments of the Dangerous Grounds with a NE-SW direction.Stratigraphic correlation reveals that the Cenozoic tectono-stratigraphic framework in the Dangerous Grounds is featured with diachronous rifting,which records the successive spreading of East Subbasin and Southwest Subbasin,South China Sea.By reconstructing the tectono-sedimentary evolution history in different segments,we combine the quantification of the brittle extension,tectonic subsidence,as well as the crustal thinning.Results provide evidence that the extensional stress migrated from northeast to southwest with the progressive propagation of the seafloor spreading in the oceanic basin.Besides,the impact of the tectonic propagation persists even after the cessation of seafloor spreading,evidenced by a longer stretching duration in the West-Dangerous Grounds than that in the eastern area.Moreover,a temporary syn-rift subsidence delay synchronously to the spreading of the adjacent oceanic basin is observed along the southern margin.This observation proves the secondary mantle convection during the seafloor spreading in the southern continental margin,which is related to the propagating rift.
文摘Modern satellite systems are generally designed to fulfill multiphase-missions. Component /subsystem redundancies are commonly used to achieve high reliability and long life of modern satellite systems. These characteristics have leaded to a critical issue of reliability analysis of satellites that is how to deal with the reliability analysis with multiphase-missions and propagated failures of redundant components. Traditional methods based on the binary decision diagram( BDD) can hardly cope with these issues efficiently. Accordingly, a recursive algorithm method was introduced to facilitate the reliability analysis of satellites. This method was specified for the analysis of static fault tree and it was implemented by generating combination of component failures and carrying out a backward recursive algorithm. The effectiveness of the proposed method was demonstrated through the reliability analysis of a multiphase satellite system with propagated failures.The major advantage of the proposed method is that it does not need composition of BDD and its computational process is automated.
基金supported by the National Natural Science Foundation of China(32025028 and 32188102)the National Key Research and Development Program of China(2022YFF1003304)the Agricultural Science and Technology Innovation Program(CAAS-ASTIP-2021-CNRRI)。
文摘Heterosis refers to hybrids that exhibit greater vigor in biomass,yield,and adaptation compared with their parents.Nearly all annual crops exhibit heterosis to a certain extent[1].Heterosis is widely utilized in various crops including rice,maize,vegetables,and certain perennials[2];however,it cannot be stably inherited in subsequent seasons because of segregation,and hybrid seed production requires complex techniques and substantial resource consumption during every season[3].Apomixis is an asexual mode of seed reproduction that is observed in over 400 plant species.It produces clonal seeds and offspring that are genetically identical to the maternal parent[4].This mechanism has been proposed to revolutionize crop breeding by enabling the rapid fixation and effective utilization of heterosis and elite heterozygous genotypes[5].
基金Supported by National Key Basic Research Program(973 No. 2010CB530507)National Nature Science Foundation(No. 81173206)
文摘Propagated sensation along meridians （PSM） is a phenomenon that a sensation moves along meridians during stimulation of an acupoint. PSM has an appearance rate of 1.3% among people and have characteristics of low speed, going toward afflicted sites and being blocked by physical pressure which is difficult to be explained by known neural and blood transmission. Volume transmission （VT） is a widespread mode of intercellular communication in the central nervous system that occurs in the extracellular fluid and in the cerebrospinal fluid. VT signals moves from source to target cells via energy gradients leading to diffusion and convection （flow） which is slow, long distance and much less space filling. VT channel diffuse forming a plexus in the extracellular space with two parameters of volume fraction and tortuosity. Some experiments showed an information transmission between adjacent and distant acupoints along meridians cross spinal segments. This process is a cross-excitation between peripheral nerve terminals which is related to nonsynaptic transmission. Some neurotransmitters or neuropeptides such as glutamate, adenosine triphosphate （ATP） and neuropeptide such as substance P, neurokinin A and calcitonin gene-related peptide relate with the cross-excitation which can be regards as VT signals. Comparing the characteristics of PSM and VT, many similar aspects can be found leading to an assumption that PSM is a process of VT in peripheral tissue along meridians. The reason why VT signals transmit along meridians is that the meridian is rich in interstitial fluid under the condition of low hydraulic resistance which has been proven experimentally. According to Darcy＇s law which descript the flow of interstitial fluid and conservation equation, interstitial fluid will move toward meridians and flow along meridians that restrict the VT signals within the channel and accelerate the flow according to Fick＇s diffusion law. During the process, a degranulation of histamine from mast cells happens on the route which can expand capillary and increase the blood perfusion and interstitial fluid which had already been observed. The mechanism of PSM is featured by alternative axon reflex （wired transmission, WT） and VT in peripheral tissue along meridians, sending simultaneously a continuous sensate signal to control nerve system which can be felt like a PSM.
基金Supported by the National Natural Science Foundation of China(No.81200604)
文摘Objective： To investigate the electrical signals propagated along Foot Taiyang Bladder Meridian （BL） in a rat model. Methods： The experiments were performed on Dark-Agouti （DA）, DA.lU and Sprague Dawley （SD） rats. The antidromic electrical stimulation was applied on the nerve innervating ＂Pishu＂ （BL 20） to mimic the acupoint electro-acupuncture （EA）. The activities recording from adjacent nerve innervating acupoint ＂Danshu＂ （BL 19） or ＂Weishu＂ （BL 21） were recorded as indics for acupoint, including the mechanical threshold and discharge rate. Results： After mimic EA on BL 20, C and A $ units from adjacent BL 19 or BL 21 were sensitized including the decrease in mechanical threshold and increase in discharge rates in DA, DA.1U and SD rats, especially in DA rats. The average discharge rate increased from 2.40± 0.26 to 6.06± 0.55 and from 1.92±0.42 to 6.17± 1.10 impulse/min （P〈0.01）, and the mechanical threshold decreased from 0.52 ± 0.12 to 0.24 ± 0.05 and from 0.27±0.02 to 0.16±0.01 mmol/L （P〈0.01） in C （n=15） and Aδ （n=18） units in DA rats. The net change in discharge rates from C units were 152.5%, 144.7% and 42.4% in DA, DA.1U and SD rats, respectively, among which DA rat＇s was the highest （P〈0.05）. In A δ units, the net change in DA rats were also the highest （221.5%, 139.2% and 49.2% in DA, DA.lU and SD rats）. Conclusions： These results showed that mimic acupoint EA activated adjacent acupoints along BL in three rat strains, which might be related to propagated sensation along meridians （PSM）. In addition, DA rats were more sensitive and might be a good model animal for PSM research.
基金financially supported by National Natural Science Foundation of China(Grant Nos.52378401,52278504)the Fundamental Research Funds for the Central Universities(Grant No.30922010918)。
文摘Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.
基金funded by the National Natural Scientific Foundation of China(Nos.52304008,52404038,52474043)the China Postdoctoral Science Foundation(No.2023MD734223)+1 种基金the Key Laboratory of Well Stability and Fluid&Rock Mechanics in Oil and Gas Reservoir of Shaanxi Province(No.23JS047)the Youth Talent Lifting Program of Xi'an Science and Technology Association(No.959202413078)。
文摘Supercritical CO_(2)(SC-CO_(2))fracturing stands out a promising waterless stimulation technique in the development of unconventional resources.While numerous studies have delved into the inducedfracture mechanism of SC-CO_(2),the small scale of rock samples and synthetic materials used in many studies have limited a comprehensive understanding of fracture propagation in unconventional formations.In this study,cubic tight sandstone samples with dimensions of 300 mm were employed to conduct SC-CO_(2)fractu ring experiments under true-triaxial stre ss conditions.The spatial morphology and quantitative attributes of fracture induced by water and SC-CO_(2)fracturing were compared,while the impact of in-situ stress on fracture propagation was also investigated.The results indicate that the SCCO_(2)fracturing takes approximately ten times longer than water fracturing.Furthermore,under identical stress condition,the breakdown pressure(BP)for SC-CO_(2)fracturing is nearly 25%lower than that for water fracturing.A quantitative analysis of fracture morphology reveals that water fracturing typically produces relatively simple fracture pattern,with the primary fracture distribution predominantly controlled by bedding planes.In contrast,SC-CO_(2)fracturing results in a more complex fracture morphology.As the differential of horizontal principal stress increases,the BP for SC-CO_(2)fractured rock exhibits a downward trend,and the induced fracture morphology becomes more simplified.Moreover,the presence of abnormal in-situ stress leads to a further increase in the BP for SC-CO_(2)fracturing,simultaneously enhancing the development of a more conductive fracture network.These findings provide critical insights into the efficiency and behavior of SC-CO_(2)fracturing in comparison to traditional water-based fracturing,offering valuable implication for its potential applications in unconventional reservoirs.
基金financially supported by,the Fundamental Research Funds for the Central Universities(Grant No.2023QN1064)the China Postdoctoral Science Foundation(Grant No.2023M733772)Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2023ZB847)。
文摘Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.
基金supported by the National Natural Science Foundation of China(Grant No.52104060)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QE015).
文摘The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of key fracture parameters,such as the fracture height and width,are particularly important to ensure efficient oilfield development and precise fracture diagnosis.This study utilized the optical frequency domain reflectometer(OFDR)technique in physical simulation experiments to monitor fractures during indoor true triaxial hydraulic fracturing experiments.The results indicate that the distributed fiber optic strain monitoring technology can efficiently capture the initiation and expansion of fractures.In horizontal well monitoring,the fiber strain waterfall plot can be used to interpret the fracture width,initiation location,and expansion speed.The fiber response can be divided into three stages:strain contraction convergence,strain band formation,and postshutdown strain rate reversal.When the fracture does not contact the fiber,a dual peak strain phenomenon occurs in the fiber and gradually converges as the fracture approaches.During vertical well monitoring in adjacent wells,within the effective monitoring range of the fiber,the axial strain produced by the fiber can represent the fracture height with an accuracy of 95.6%relative to the actual fracture height.This study provides a new perspective on real-time fracture monitoring.The response patterns of fiber-induced strain due to fractures can help us better understand and assess the dynamic fracture behavior,offering significant value for the optimization of oilfield development and fracture diagnostic techniques.
基金financially supported by the National Natural Science Foundation of China(Nos.52204085 and 52104074)the Youth Science and Technology Foundation Key Laboratory for Mechanics in Fluid Solid Coupling System,Institute of Mechanics(No.E0XM040401)。
文摘This study primarily investigates the rock fracture mechanism of bottom cushion layer blasting and explores the effects of the bottom cushion layer on rock fragmentation.It involves analyses of the evolution patterns of blasting stress,characteristics of crack distribution,and rock fracture features in the specimens.First,blasting model experiments were carried out using the dynamic caustics principle to investigate the influence of bottom cushion layers and initiation methods on the integrity of the bottom rock mass.The experimental results indicate that the combined use of bottom cushion layers and inverse initiation effectively protects the integrity of the bottom rock mass.Subsequently,the process of stress wave propagation and dynamic crack propagation in rocks was simulated using the continuum-discontinuum element method(CDEM)and the Landau explosion source model,with varying thicknesses of bottom cushion layers.The numerical simulation results indicate that with increasing cushion thickness,the absorption of energy generated by the explosion becomes more pronounced,resulting in fewer cracks in the bottom rock mass.This illustrates the positive role of the cushion layer in protecting the integrity of the bottom rock mass.
文摘Ice load on underwater vehicles breaking through ice covers from underneath is a significant concern for researchers in polar exploration,and the research on this problem is still in its early stages.Both mechanical experimental measurement and numerical simulation pose research challenges.This study focuses on the ice load of a cylinder structure breaking upward through the ice sheet form underneath in the Small Ice Model Basin of China Ship Scientific Research Center(CSSRC SIMB).A high-speed camera system was employed to observe the ice sheet failure during the tests,in which,with the loading position as center,local radial cracks and circumferential cracks were generated.A load sensor was used to measure the overall ice load during this process.Meanwhile,a numerical model was developed using LS-DYNA for validation and comparison.With this model,numerical simulation was conducted under various ice thicknesses and upgoing speeds to analyze the instantaneous curves of ice load.The calculation results were statistically analyzed under different working conditions to determine the influence of the factors on the ice load of the cylinder.The study explores the measurement method about ice load of objects vertically breaking through model ice sheet and is expected to provide some fundamental insights into the safety design of underwater structures operating in ice waters.
基金National Natural Science Foundation of China(12172292,12072287)。
文摘The crack initiation and early propagation are of great significance to the overall fatigue life of material.In order to investigate the anisotropic fracture behavior of laser metal deposited Ti-6Al-4V alloy(LMD Ti64)during the early stage,the fourpoint bending fatigue test was carried out on specimens of three different directions,as well as the forged specimens.The results indicate the anisotropic crack initiation and early propagation of LMD Ti64.The direction perpendicular to the deposition direction exhibits a better fatigue resistance than the other two.The crack initiation position and propagation path are dominated by the microstructure in the vicinity of U-notch.LMD Ti64 has a typical small crack effect,and the early crack propagation velocities in three directions are similar.Affected by the slip system of LMD Ti64,secondary cracks frequently occur,which are often found to have an angle of 60°to the main crack.The electron backscatter diffraction analysis indicates that LMD Ti64 has preferred orientations,i.e.,strong 0001//Z texture and 001//Z texture.Their crystallographic orientation will change as the direction of columnarβgrains turns over,resulting in the fatigue anisotropy of LMD Ti64 in crack initiation and early crack propagation process.
基金Project supported by the Chilean National Agency for Research and Development(ANID)through Grants ANID FONDECYT Regular(Nos.1211310 and 1250496)ANID Anillo de Tecnologia(No.ACT240015)the Polish National Science Centre(NCN)through Grant Agreement(No.2021/41/B/ST8/04492)。
文摘The acoustic wave propagation in gas-saturated double-porosity materials composed of a microporous matrix and mesopores with arrays of plate-type resonators is investigated.A macroscopic description,established with the two-scale asymptotic homogenization method,evidences the combined effect of inner resonances on the acoustic properties of the respective effective visco-thermal fluid.One type of resonance originates from strong pore-scale fluid-structure interaction,while the other one arises from pressure diffusion.These phenomena respectively cause weakly and highly damped resonances,which are activated by internal momentum or mass sources,and can largely influence,depending on the material's morphology,either the effective fluid's dynamic density,compressibility,or both.We introduce semi-analytical models to illustrate the key effective properties of the studied multiscale metamaterials.The results provide insights for the bottom-up design of multiscale acoustic metamaterials with exotic behaviors,such as the negative,very slow,or supersonic phase velocity,as well as sub-wavelength bandgaps.
基金funded by the Ministry of Science and Technology of the People's Republic of China(Grant 2024ZD1001301)the National Natural Science Foundation of China(Grants 42272241,42102254 and 41830213)the Fundamental Research Funds for the Central Universities(Grant JZ2023HGTB0238).
文摘The approximately 3000 km long Tan-Lu fault zone(TLFZ)in East Asia is the longest continental strike-slip fault zone in the world and exemplifies how such a fault zone forms and propagates on a continental scale.Structural and geochronological data from the TLFZ and surrounding regions indicate that the fault zone originated as NE/SW-striking sinistral ductile shear zones along an oblique continental convergence margin during the Triassic indentation collision between the North China Craton and the Yangtze Block.The Triassic fault zone,with a total length of about 720 km between the Dabie and Sulu orogens,exhibited an apparent sinistral offset of approximately 300 km along the TLFZ.The second stage of sinistral movement occurred in the earliest Late Jurassic,reactivating the pre-existing southern segment and propagating northwards to the southern coastline of present-day Bohai Bay,as well as forming a significant portion of the Dunhua-Mishan fault zone.The third stage of sinistral movement,in the earliest Early Cretaceous,was the most intense strike-slip movement of the Mesozoic,leading to the complete linkage of the TLFZ.This stage included further northward propagation of the southern-middle segment,both southward and northward propagation of the Dunhua-Mishan fault zone,as well as the formation of the entire Yilan-Yitong fault zone.The fourth stage,in the earliest Late Cretaceous,involved the reactivation of the entire TLFZ.Following its Triassic origin due to the indentation collision,the subduction of the Paleo-Pacific Plate and the subduction and closure of the Mongol-Okhotsk Ocean were responsible for the multi-stage sinistral movements from the Late Jurassic to the Cretaceous.The evolution of the TLFZ demonstrates that a continental-scale strike-slip fault zone(>1000 km long)forms through multiple stages of propagation and linkage in dynamic settings of plate convergence.
文摘The southern part of East Siberia(SES)is highly vulnerable to flooding caused by the extreme precipitation events(EPEs)during summer.Building on previously detected EPEs in SES and Mongolia,we examined wave propagation patterns for two periods:1982-98 and 1999-2019.Our analysis revealed distinct wave train configurations and geopotential anomalies preceding EPEs,with an increase in wave activity flux across the Northern Hemisphere,followed by a subsequent decrease during EPEs.Consequently,Eastern Siberia has experienced a significant rise in wave activity.Based on geopotential anomalies over Central Siberia accompanying EPEs,we identified two main types.The first,the ridge type,is predominant during the first period and features a meridional contrast with a positive geopotential(and temperature)anomaly over Central Siberia and a negative anomaly over the subtropical regions along the same longitude.The second type,termed the trough type,is more typical for the second period.It involves either a negative geopotential anomaly or the zonal proximity of positive and negative geopotential anomalies over Central Siberia.The trough type,marked by zonally oriented anomalies in geopotential and temperature,results in a more pronounced temperature decrease before EPEs and significant zonal temperature contrasts.Further,it is related to more stationary waves over Northern Eurasia,with persistent positive geopotential anomalies over Europe linked to quasi-stationary troughs over Central Siberia and positive anomalies east of Lake Baikal.Our findings align with shifts in boreal summer teleconnection patterns,reflecting significant changes in wave propagation patterns that have occurred since the late 1990s.
基金supported by the Sichuan Science and Technology Program of China(2024NSFSC0097,2023NSFSC0004)the National Natural Science Foundation of China(42377143,52225403).
文摘The mainstream method for extracting shale gas involves hydraulic fracturing to create fracture networks.However,as extraction depth increases,notable issues such as rapid production decline,low recovery rates,high water consumption,and resource waste become apparent.Identifying new and efficient auxiliary rock-breaking technologies is crucial for overcoming these challenges.The laser,successfully utilized in industrial production,medical treatment,and technological research,offers unique features such as good directionality,coherence,and high energy density,providing novel possibilities for addressing the limitations of existing deep reservoir transformation.This research focuses on a novel laser-assisted rock-breaking technology,with shale featuring different bedding angles as the subject of investigation.The investigation methodically explored how shale responded to thermal fracture at high temperatures when exposed to laser irradiation with different spot diameter.It investigates the spatiotemporal evolution characteristics of the shale temperature field under laser irradiation,the propagation features of cracks on shale surface,and the physicochemical fracture mechanisms.The research yields the following results:(1)The region of thermal influence of the irradiation surface can be divided into three regions based on the change of rise curve of temperature in the shale surface.(2)Based on the scanning electron microscopy(SEM)testing,combined with the macroscopic and microscopic morphological characteristics of shale fracture surfaces,it reveals significantly distinct zoning characteristics in the roughness of the rock sample’s fracture surfaces after laser irradiation.(3)The thermal fracturing process of shale under laser irradiation involves chemical reactions of constituent minerals and stress generated by the thermal expansion of shale oil in the reservoir.(4)The damage and fracture of shale under the irradiation of laser show significant bedding effect,and there are three modes of rock sample failure:Pattern T(thermal failure),Pattern T-B(thermal and bedding synergistic failure),and Pattern B(bedding failure).The research findings presented in this article serve as a foundation and reference for the theory and technology of laser-assisted shale gas extraction.
基金Project supported by the Natural Science Foundation of Henan Province,China(Grant No.242300420634)the Cultivative Plan of Henan University of Technology(Grant No.2024PYJH035)+3 种基金the Research Foundation for Advanced Talents of Henan University of Technology(Grant Nos.2022BS067 and 2022BS068)the National Natural Science Foundation of China(Grant No.62301211)the Key Research and Development and Promotion Special Project(Science and Technology Research)in Henan Province,China(Grant No.232102211068)the Innovative Funds Plan of Henan University of Technology(Grant No.2022ZKCJ15)。
文摘The surface of a high-speed vehicle reentering the atmosphere is surrounded by plasma sheath.Due to the influence of the inhomogeneous flow field around the vehicle,understanding the electromagnetic properties of the plasma sheath can be challenging.Obtaining the electron density of the plasma sheath is crucial for understanding and achieving plasma stealth of vehicles.In this work,the relationship between electromagnetic wave attenuation and electron density is deduced theoretically.The attenuation distribution along the propagation path is found to be proportional to the integral of the plasma electron density.This result is used to predict the electron density profile.Furthermore,the average electron density is obtained using a back-propagation neural network algorithm.Finally,the spatial distribution of the electron density can be determined from the average electron density and the normalized derivative of attenuation with respect to the propagation depth.Compared to traditional probe measurement methods,the proposed approach not only improves efficiency but also preserves the integrity of the plasma environment.
