DSS have high strength,high corrosion resistance and good welding properties.Comparing with the same corrosion resistance level austenitic stainless steel,DSS decrease largely Ni content and realize the thinning of th...DSS have high strength,high corrosion resistance and good welding properties.Comparing with the same corrosion resistance level austenitic stainless steel,DSS decrease largely Ni content and realize the thinning of thickness design to perfectly optimize properties and decrease costs.Now DSS have been widely used in many fields such as petroleum,chemical industry,paper production,shipbuilding,nuclear power, seawater desalting,vacuum salt production and architecture.Tisco have began the process development and product application research of DSS products from last century and gradually solved a lot of technical problems such as AOD nitrogen alloying control of various content DSS,high temperature deformation mechanism of thermal process,large deformation hot rolling process of coils,the effect of bad phase precipitated during hot treatment process on properties and high efficiency pickling of high Cr/Mo content DSS plates.The various alloy content DSS plates and wide cold rolling coils(3Re60,S32101,S32304, S31803,S32205,S32750 and SUS329J4L) were successfully developed and used in national important constructions,key industries and abroad projects.展开更多
Rapid economic growth since the turn of the century has often been accompanied by significant challenges,including fossil fuel depletion,environmental degradation,and energy security concerns.Urgent measures are essen...Rapid economic growth since the turn of the century has often been accompanied by significant challenges,including fossil fuel depletion,environmental degradation,and energy security concerns.Urgent measures are essential to promote environmentally friendly advancements and adopt sustainable energy solutions.Biomass energy,an important component of renewable energy,stands out as the sole renewable energy source containing carbon and has attracted significant attention from governments and the scientific community worldwide.Attention to biomass conversion technologies and their practical applications has gradually increased.This paper provides an in-depth analysis of the utilization of biomass and its wastes,and systematically introduces the progress of the application of biomass conversion technologies,including biochemical and thermochemical conversion,to provide readers with a clear picture of the technological development.By meticulously summarizing the current status of the application of different products produced by these technologies,it provides a valuable reference for researchers and practitioners in the field of biomass energy,aiming to meet the challenges of clean energy production and biomass waste management,and to mitigate the adverse impacts of human activities on the environment.In addition,this paper explores the application of machine learning in the field of biomass conversion,especially its potential in optimizing the biomass conversion process,improving the accuracy of energy yield prediction,and enhancing process control.Despite challenges such as data quality and model interpretability,developments in machine learning,particularly advances in feature engineering and interpretable AI,promise to address these issues.This study contributes positively to advancing biomass energy technologies.展开更多
Objective To explore the impact of pre-operative platelet aggregation rate(PAR)on off-pump coronary artery bypass grafting(OPCABG),meanwhile to study the relationship between platelet function and blood product applic...Objective To explore the impact of pre-operative platelet aggregation rate(PAR)on off-pump coronary artery bypass grafting(OPCABG),meanwhile to study the relationship between platelet function and blood product application during peri-operative period in relevant patients.Methods A total of 172 patients receiving OPCABG in our hospita from 2014-01 to 2015-09 were en-展开更多
The rapid development of industry application products has greatly influenced society. It has become essential for some telecommunication companies to focus on customer satisfaction with industrial products used by th...The rapid development of industry application products has greatly influenced society. It has become essential for some telecommunication companies to focus on customer satisfaction with industrial products used by the government and enterprise customers. Following the review of a previous study of customer satisfaction and with the help of experiential level theory,this article attempts to establish a Satisfaction Factors Model for researching customer satisfaction with industry applications. We chose a product named "Mobile Monitor" and investigated the emotional satisfaction of 127 users and company leaders from different walks of life,and showed that 7 of the product's features affected the customers' overall emotional satisfaction. Lastly,this paper points out management implications of this application based on quantitative results. It presents a preliminary exploration program for customer satisfaction research in this specific field. The empirical research on a specific product based on experimental level theory may serve as a reference for other companies that desire to carry out similar surveys in future.展开更多
The possibility of co-deposition of Li(Ⅰ)and RE(Ⅲ)has been estimated by both theoretical analysis and experimental study on the influences of temperature and concen- tration of chloride on the deposition potential.B...The possibility of co-deposition of Li(Ⅰ)and RE(Ⅲ)has been estimated by both theoretical analysis and experimental study on the influences of temperature and concen- tration of chloride on the deposition potential.Both the electrochemical and electrolytic results clearly show that Li(Ⅰ)and RE(Ⅲ)can co-deposit on the Al-Cu electrode under selected conditions.展开更多
Currently, the application work on 2008 Product Development Contribution Award of China National Textile &Apparel Council, has been initiated, and this award is established
Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of g...Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of geometric accuracy and surface finish, can be enhanced by using the product manufacturing information(PMI) stored in the neutral standard for the exchange of product model data(STEP) file, thereby integrating design and manufacturing. The present paper proposes a unique fixture design approach, to extract the geometry information from STEP application protocol(AP) 242 files of computer aided design(CAD) models, for providing automatic suggestions of locator positions and clamping surfaces. Automatic feature extraction software "FiXplan", developed using the programming language C#, is used to extract the part feature, dimension and geometry information. The information from the STEP AP 242 file is deduced using geometric reasoning techniques, which in turn is utilized for fixture planning. The developed software is observed to be adept in identifying the primary, secondary, and tertiary locating faces and locator position configurations of prismatic components. Structural analysis of the prismatic part under different locator positions was performed using commercial finite element method software, ABAQUS, and the optimized locator position was identified on the basis of minimum deformation of the workpiece.The area-ratio(base locator enclosed area(%)/work piece base area(%)) for the ideal locator configuration was observed as 33%. Experiments were conducted on a prismatic workpiece using a specially designed fixture, for different locator configurations. The surface roughness and waviness of the machined surfaces were analysed using an Alicona non-contact optical profilometer. The best surface characteristics were obtained for the surface machined under the ideal locator positions having an area-ratio of 33%, thus validating the predicted numerical results. The efficiency, capability and applicability of the developed software is demonstrated for the finishing operation of a sensor cover – a typical prismatic component having applications in the naval industry, under different locator configurations.The best results were obtained under the proposed ideal locator configuration of area-ratio 33%.展开更多
The paper summarizes the research on the development of standards for tunnels and roads LED lighiing application in Shanghai. analyzes the existing problems on LED road lamps and lighting design, introduces the experi...The paper summarizes the research on the development of standards for tunnels and roads LED lighiing application in Shanghai. analyzes the existing problems on LED road lamps and lighting design, introduces the experiments and testing results, and summarizes current problems of LED street lighting, proposing that LED lighting energy conservation should he ＂systematic energy saving＂ throughout the full life cycle based on the integration of products and applications.展开更多
With the rapid development of China's science and technology and social economy, computer information technology is widely used in the field of mechanical engineering technology. Numerical control technology has b...With the rapid development of China's science and technology and social economy, computer information technology is widely used in the field of mechanical engineering technology. Numerical control technology has been popularized and applied in various industries, especially in mechanical manufacturing industry. There is still a large space for development in the application of numerical control technology in China. Therefore, numerical control technology should be studied and broken through in the next step, so as to provide support for China’s mechanical mold manufacturing industry. On this premise, this paper first expounds the principle of NC machining technology, and then explains its application advantages, scope of application and function one by one. Finally, it puts forward the methods of how to optimize and improve in machining process, so as to provide relevant reference for the development of NC machining industry.展开更多
Through the demand analysis of emergency power supply construction, waterfall noise reduction treatment, and utilization of residual pressure resources, combined with water resources and industrial infrastructure cond...Through the demand analysis of emergency power supply construction, waterfall noise reduction treatment, and utilization of residual pressure resources, combined with water resources and industrial infrastructure conditions, this paper proposes the significance of micro hydropower station construction. However, micro hydropower stations face issues such as insufficient construction standardization, prominent safety hazards, lack of specialized standards, and the need for improved planning and design. Therefore, this paper analyzes and discusses the constraints and improvement summaries in the entire construction process of micro hydropower stations from aspects including guidance of standard formulation, rationality of planning and design, and innovation of new product applications.展开更多
In this study,in-situ soil moisture measurements are used to evaluate the accuracy of three AMSR-E soil moisture prod ucts from NASA(National Aeronautics and Space Administration),JAXA(Japanese Aerospace Exploration A...In this study,in-situ soil moisture measurements are used to evaluate the accuracy of three AMSR-E soil moisture prod ucts from NASA(National Aeronautics and Space Administration),JAXA(Japanese Aerospace Exploration Agency)and VUA(Vrije University Amsterdam and NASA)over Maqu County,Source Area of the Yellow River(SAYR),China.Re sults show that the VUA soil moisture product performs the best among the three AMSR-E soil moisture products in the study area,with a minimum RMSE(root mean square error)of 0.08(0.10)m3/m3 and smallest absolute error of 0.07(0.08)m3/m3 at the grassland area with ascending(descending)data.Therefore,the VUA soil moisture product is used to describe the spatial variation of soil moisture during the 2010 growing season over SAYR.The VUA soil moisture product shows that soil moisture presents a declining trend from east south(0.42 m3/m3)to west north(0.23 m3/m3),with good agreement with a general precipitation distribution.The center of SAYR presents extreme wetness(0.60 m3/m3)dur ing the whole study period,especially in July,while the head of SAYR presents a high level soil moisture(0.23 m3/m3)in July,August and September.展开更多
This project is supported by the 2007 R ＆ D Special Fund for Public Welfare by Ministry of Science and Technology and Ministry of Finance.Research tasks in this project are proposed based on the implementation plan o...This project is supported by the 2007 R ＆ D Special Fund for Public Welfare by Ministry of Science and Technology and Ministry of Finance.Research tasks in this project are proposed based on the implementation plan of the＂THORPEX（The Observing System Research and Predictability Experiment） Interactive Grand Global Ensemble（TIGGE）＂,a sub-project of the THORPEX international program.展开更多
To address the issues of energy crisis and global warming, novel renewable carbon-free or carbon-neutral energy sources must be identified and developed. A deeper understanding of photosynthesis is the key to provide ...To address the issues of energy crisis and global warming, novel renewable carbon-free or carbon-neutral energy sources must be identified and developed. A deeper understanding of photosynthesis is the key to provide a solid foundation to facilitate this transformation. To mimic the water oxidation of photosystem II oxygen evolving complex, Mn-oxo complexes and Co-phosphate catalytic material were discovered in solar energy storage. Building on these discoveries, recent advances in solar energy conversion showed a compelling working principle by combing the active Mn-oxo and Co-based catalysts in water splitting with semiconductor heteronanostructures for effective solar energy harnessing. In this review the appealing systems including Mn-oxo tetramer/Nafion, Mn-oxo dimer/TiO2, Mn-oxo oligomer/WO3, Co-Pi/Fe2O3, and Co-Pi/ZnO are summarized and discussed. These accomplishments offer a promising framework and have a profound impact in the field of solar fuel production.展开更多
Overuse of fossil fuels led to energy crises and pollution.Thus,alternative energy sources are needed.Hydrogen,with its clean and high-density traits,is seen as a future energy carrier.Producing hydrogen from electric...Overuse of fossil fuels led to energy crises and pollution.Thus,alternative energy sources are needed.Hydrogen,with its clean and high-density traits,is seen as a future energy carrier.Producing hydrogen from electricity can store renewable energy for a sustainable hydrogen economy.While much research on water electrolysis hydrogen production systems exists,comprehensive reviews of engineering applications are scarce.This review sums up progress and improvement strategies of common water electrolysis technologies(alkaline water electrolysis,proton exchange membrane water electrolysis,solid oxide water electrolysis,and anion exchange membrane water electrolysis,etc.),including component and material research and development.It also reviews these technologies by development and maturity,especially their engineering applications,discussing features and prospects.Bottlenecks of different technologies are compared and analyzed,and future directions are summarized.The aim is to link academic material research with industrial manufacturing.展开更多
1. An overall judgment on the situation 2006 saw the rapid growth of passenger vehicles, with the production capacity putting into use rose from less than 70 percent to around 80 percent. That with light commercial ve...1. An overall judgment on the situation 2006 saw the rapid growth of passenger vehicles, with the production capacity putting into use rose from less than 70 percent to around 80 percent. That with light commercial vehicles was similar too. The situation in 2005 and 2006 showed that there are no evidential overdone production capacity.展开更多
This paper summarizes the characteristics of Fengyun satellite and the properties of the data transmission, and also gives a brief introduction to the data acquisition and processing system. At last, it describes the ...This paper summarizes the characteristics of Fengyun satellite and the properties of the data transmission, and also gives a brief introduction to the data acquisition and processing system. At last, it describes the products derived from satellite data produced by this system and their applications in particular.展开更多
文摘DSS have high strength,high corrosion resistance and good welding properties.Comparing with the same corrosion resistance level austenitic stainless steel,DSS decrease largely Ni content and realize the thinning of thickness design to perfectly optimize properties and decrease costs.Now DSS have been widely used in many fields such as petroleum,chemical industry,paper production,shipbuilding,nuclear power, seawater desalting,vacuum salt production and architecture.Tisco have began the process development and product application research of DSS products from last century and gradually solved a lot of technical problems such as AOD nitrogen alloying control of various content DSS,high temperature deformation mechanism of thermal process,large deformation hot rolling process of coils,the effect of bad phase precipitated during hot treatment process on properties and high efficiency pickling of high Cr/Mo content DSS plates.The various alloy content DSS plates and wide cold rolling coils(3Re60,S32101,S32304, S31803,S32205,S32750 and SUS329J4L) were successfully developed and used in national important constructions,key industries and abroad projects.
基金supported by the Key R&D Projects in Henan Province(Grant No.2411111321700)the Major Science and Technology Projects in Henan Province(Grant No.231100110200).
文摘Rapid economic growth since the turn of the century has often been accompanied by significant challenges,including fossil fuel depletion,environmental degradation,and energy security concerns.Urgent measures are essential to promote environmentally friendly advancements and adopt sustainable energy solutions.Biomass energy,an important component of renewable energy,stands out as the sole renewable energy source containing carbon and has attracted significant attention from governments and the scientific community worldwide.Attention to biomass conversion technologies and their practical applications has gradually increased.This paper provides an in-depth analysis of the utilization of biomass and its wastes,and systematically introduces the progress of the application of biomass conversion technologies,including biochemical and thermochemical conversion,to provide readers with a clear picture of the technological development.By meticulously summarizing the current status of the application of different products produced by these technologies,it provides a valuable reference for researchers and practitioners in the field of biomass energy,aiming to meet the challenges of clean energy production and biomass waste management,and to mitigate the adverse impacts of human activities on the environment.In addition,this paper explores the application of machine learning in the field of biomass conversion,especially its potential in optimizing the biomass conversion process,improving the accuracy of energy yield prediction,and enhancing process control.Despite challenges such as data quality and model interpretability,developments in machine learning,particularly advances in feature engineering and interpretable AI,promise to address these issues.This study contributes positively to advancing biomass energy technologies.
文摘Objective To explore the impact of pre-operative platelet aggregation rate(PAR)on off-pump coronary artery bypass grafting(OPCABG),meanwhile to study the relationship between platelet function and blood product application during peri-operative period in relevant patients.Methods A total of 172 patients receiving OPCABG in our hospita from 2014-01 to 2015-09 were en-
基金supported by the Research on Group Customers Satisfaction of Hubei Telecom
文摘The rapid development of industry application products has greatly influenced society. It has become essential for some telecommunication companies to focus on customer satisfaction with industrial products used by the government and enterprise customers. Following the review of a previous study of customer satisfaction and with the help of experiential level theory,this article attempts to establish a Satisfaction Factors Model for researching customer satisfaction with industry applications. We chose a product named "Mobile Monitor" and investigated the emotional satisfaction of 127 users and company leaders from different walks of life,and showed that 7 of the product's features affected the customers' overall emotional satisfaction. Lastly,this paper points out management implications of this application based on quantitative results. It presents a preliminary exploration program for customer satisfaction research in this specific field. The empirical research on a specific product based on experimental level theory may serve as a reference for other companies that desire to carry out similar surveys in future.
文摘The possibility of co-deposition of Li(Ⅰ)and RE(Ⅲ)has been estimated by both theoretical analysis and experimental study on the influences of temperature and concen- tration of chloride on the deposition potential.Both the electrochemical and electrolytic results clearly show that Li(Ⅰ)and RE(Ⅲ)can co-deposit on the Al-Cu electrode under selected conditions.
文摘Currently, the application work on 2008 Product Development Contribution Award of China National Textile &Apparel Council, has been initiated, and this award is established
基金Department of Science and Technology,Government of India for providing financial support under the scheme FIST(No.SR/FST/ETI-388/2015)。
文摘Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of geometric accuracy and surface finish, can be enhanced by using the product manufacturing information(PMI) stored in the neutral standard for the exchange of product model data(STEP) file, thereby integrating design and manufacturing. The present paper proposes a unique fixture design approach, to extract the geometry information from STEP application protocol(AP) 242 files of computer aided design(CAD) models, for providing automatic suggestions of locator positions and clamping surfaces. Automatic feature extraction software "FiXplan", developed using the programming language C#, is used to extract the part feature, dimension and geometry information. The information from the STEP AP 242 file is deduced using geometric reasoning techniques, which in turn is utilized for fixture planning. The developed software is observed to be adept in identifying the primary, secondary, and tertiary locating faces and locator position configurations of prismatic components. Structural analysis of the prismatic part under different locator positions was performed using commercial finite element method software, ABAQUS, and the optimized locator position was identified on the basis of minimum deformation of the workpiece.The area-ratio(base locator enclosed area(%)/work piece base area(%)) for the ideal locator configuration was observed as 33%. Experiments were conducted on a prismatic workpiece using a specially designed fixture, for different locator configurations. The surface roughness and waviness of the machined surfaces were analysed using an Alicona non-contact optical profilometer. The best surface characteristics were obtained for the surface machined under the ideal locator positions having an area-ratio of 33%, thus validating the predicted numerical results. The efficiency, capability and applicability of the developed software is demonstrated for the finishing operation of a sensor cover – a typical prismatic component having applications in the naval industry, under different locator configurations.The best results were obtained under the proposed ideal locator configuration of area-ratio 33%.
文摘The paper summarizes the research on the development of standards for tunnels and roads LED lighiing application in Shanghai. analyzes the existing problems on LED road lamps and lighting design, introduces the experiments and testing results, and summarizes current problems of LED street lighting, proposing that LED lighting energy conservation should he ＂systematic energy saving＂ throughout the full life cycle based on the integration of products and applications.
文摘With the rapid development of China's science and technology and social economy, computer information technology is widely used in the field of mechanical engineering technology. Numerical control technology has been popularized and applied in various industries, especially in mechanical manufacturing industry. There is still a large space for development in the application of numerical control technology in China. Therefore, numerical control technology should be studied and broken through in the next step, so as to provide support for China’s mechanical mold manufacturing industry. On this premise, this paper first expounds the principle of NC machining technology, and then explains its application advantages, scope of application and function one by one. Finally, it puts forward the methods of how to optimize and improve in machining process, so as to provide relevant reference for the development of NC machining industry.
文摘Through the demand analysis of emergency power supply construction, waterfall noise reduction treatment, and utilization of residual pressure resources, combined with water resources and industrial infrastructure conditions, this paper proposes the significance of micro hydropower station construction. However, micro hydropower stations face issues such as insufficient construction standardization, prominent safety hazards, lack of specialized standards, and the need for improved planning and design. Therefore, this paper analyzes and discusses the constraints and improvement summaries in the entire construction process of micro hydropower stations from aspects including guidance of standard formulation, rationality of planning and design, and innovation of new product applications.
基金supported in part by the Programs of National Natural Science Foundation of China (41675157, 91537212)
文摘In this study,in-situ soil moisture measurements are used to evaluate the accuracy of three AMSR-E soil moisture prod ucts from NASA(National Aeronautics and Space Administration),JAXA(Japanese Aerospace Exploration Agency)and VUA(Vrije University Amsterdam and NASA)over Maqu County,Source Area of the Yellow River(SAYR),China.Re sults show that the VUA soil moisture product performs the best among the three AMSR-E soil moisture products in the study area,with a minimum RMSE(root mean square error)of 0.08(0.10)m3/m3 and smallest absolute error of 0.07(0.08)m3/m3 at the grassland area with ascending(descending)data.Therefore,the VUA soil moisture product is used to describe the spatial variation of soil moisture during the 2010 growing season over SAYR.The VUA soil moisture product shows that soil moisture presents a declining trend from east south(0.42 m3/m3)to west north(0.23 m3/m3),with good agreement with a general precipitation distribution.The center of SAYR presents extreme wetness(0.60 m3/m3)dur ing the whole study period,especially in July,while the head of SAYR presents a high level soil moisture(0.23 m3/m3)in July,August and September.
文摘This project is supported by the 2007 R ＆ D Special Fund for Public Welfare by Ministry of Science and Technology and Ministry of Finance.Research tasks in this project are proposed based on the implementation plan of the＂THORPEX（The Observing System Research and Predictability Experiment） Interactive Grand Global Ensemble（TIGGE）＂,a sub-project of the THORPEX international program.
基金supported by the University of Massachusetts Dartmouth and in part by a grant from the USDA CSREES
文摘To address the issues of energy crisis and global warming, novel renewable carbon-free or carbon-neutral energy sources must be identified and developed. A deeper understanding of photosynthesis is the key to provide a solid foundation to facilitate this transformation. To mimic the water oxidation of photosystem II oxygen evolving complex, Mn-oxo complexes and Co-phosphate catalytic material were discovered in solar energy storage. Building on these discoveries, recent advances in solar energy conversion showed a compelling working principle by combing the active Mn-oxo and Co-based catalysts in water splitting with semiconductor heteronanostructures for effective solar energy harnessing. In this review the appealing systems including Mn-oxo tetramer/Nafion, Mn-oxo dimer/TiO2, Mn-oxo oligomer/WO3, Co-Pi/Fe2O3, and Co-Pi/ZnO are summarized and discussed. These accomplishments offer a promising framework and have a profound impact in the field of solar fuel production.
基金the National Natural Science Foundation of China(Grant No.22478423)for the support.
文摘Overuse of fossil fuels led to energy crises and pollution.Thus,alternative energy sources are needed.Hydrogen,with its clean and high-density traits,is seen as a future energy carrier.Producing hydrogen from electricity can store renewable energy for a sustainable hydrogen economy.While much research on water electrolysis hydrogen production systems exists,comprehensive reviews of engineering applications are scarce.This review sums up progress and improvement strategies of common water electrolysis technologies(alkaline water electrolysis,proton exchange membrane water electrolysis,solid oxide water electrolysis,and anion exchange membrane water electrolysis,etc.),including component and material research and development.It also reviews these technologies by development and maturity,especially their engineering applications,discussing features and prospects.Bottlenecks of different technologies are compared and analyzed,and future directions are summarized.The aim is to link academic material research with industrial manufacturing.
文摘1. An overall judgment on the situation 2006 saw the rapid growth of passenger vehicles, with the production capacity putting into use rose from less than 70 percent to around 80 percent. That with light commercial vehicles was similar too. The situation in 2005 and 2006 showed that there are no evidential overdone production capacity.
文摘This paper summarizes the characteristics of Fengyun satellite and the properties of the data transmission, and also gives a brief introduction to the data acquisition and processing system. At last, it describes the products derived from satellite data produced by this system and their applications in particular.
