The Mn-Ce-Fe mixed oxide(MCFe)was prepared by co-precipitation and the catalytic performance was tested by using 1,2-dichlorobenzene(1,2-DCB)and furan as model molecules of PCDD/F.The effect of O_(2)concentration,SO_(...The Mn-Ce-Fe mixed oxide(MCFe)was prepared by co-precipitation and the catalytic performance was tested by using 1,2-dichlorobenzene(1,2-DCB)and furan as model molecules of PCDD/F.The effect of O_(2)concentration,SO_(2) and NO on the catalytic activity was studied.At 270℃,the MCFe oxide catalyst presents significant simultaneous removal efficiency of 75.25%and 100%for 1,2-DCB and furan,respectively.Brunauer-Emmett-Teller(BET)method(BET),X-ray diffraction(XRD),scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FTIR),H_2-temperature programmed reduction(H_(2)-TPR),NH_(3)-temperature programmed desorption(NH_3-TPD)and O_(2)-TPD were used to characterize the catalysts before and after the reaction.Competition tests suggest that the oxidation behavior of furan occurred prior to that of 1,2-DCB.According to the intermediate products detected by gas chromatography-mass spectrometry(GC-MS),the by-products include chlorinated hydrocarbons,long-chain hydrocarbons,ketone,etc.Possible catalytic oxidation reaction paths are proposed.展开更多
Current gas well decline analysis under boundary-dominated flow(BDF)is largely based on the Arps'empirical hyperbolic decline model and the analytical type curve tools associated with pseudo-functions.Due to the n...Current gas well decline analysis under boundary-dominated flow(BDF)is largely based on the Arps'empirical hyperbolic decline model and the analytical type curve tools associated with pseudo-functions.Due to the nonlinear flow behavior of natural gas,these analysis methods generally require iterative calculations.In this study,the dimensionless gas rate(qg/qgi)is introduced,and an explicit method to determine the average reservoir pressure and the original gas in place(OGIP)for a volumetric gas reservoir is proposed.We show that the dimensionless gas rate in the BDF is only the function of the gas PVT parameters and reservoir pressure.Step-by-step analysis procedures are presented that enable explicit and straightforward estimation of average reservoir pressure and OGIP by straight-line analysis.Compared with current techniques,this methodology avoids the iterative calculation of pseudo-time and pseudo-pressure functions,lowers the multiplicity of type curve analysis,and is applicable in different production situations(constant/variable gas flow rate,constant/variable bottom-hole pressure)with a broad range of applications and ease of use.Reservoir numerical simulation and field examples are thoroughly discussed to highlight the capabilities of the proposed approach.展开更多
Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently d...Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.展开更多
Gastrodia elata Blume has a rich history of use in Asian.However,there is still a need for systematic analysis regarding the relationship and in-depth development between its components and functions.Through comprehen...Gastrodia elata Blume has a rich history of use in Asian.However,there is still a need for systematic analysis regarding the relationship and in-depth development between its components and functions.Through comprehensive analysis utilizing databases such as Pub Med,Web of Science,and Google Scholar,the practical components,biological activities,and product development of G.elata have been investigated.It has been found that the main active components of G.elata,such as gastrodin and G.elata polysaccharides,possess functionalities in improving conditions such as epilepsy,hypertension,and osteoporosis.These active components exhibit phenolic hydroxyl groups,molecular weight,conformation,and spatial arrangement,contributing to their enhanced ability to scavenge free radicals.Additionally,G.elata is known to have organic acids and esters,which exhibit potential immune regulatory and antiviral properties.Compounds with multiple acidic functional groups exhibit even more vigorous activity.Steroidal compounds likeβ-sitosterol,due to their presence of alcohol and ketone groups,along with a multi-ring structure,exhibit superior cholesterol-lowering activity.G.elata has already been recognized in the traditional chinese medicine and food homology list,showcasing its potential for development in line with the health demands of the current era.However,challenges regarding quality evaluation,peculiar odor,and the extraction process of the practical components still require immediate attention.Constructing a robust evaluation system and optimizing product processing techniques will be crucial for the future advancement of the G.elata industry.展开更多
Horizontal wells in the anisotropic reservoirs can be stimulated by hydraulic fracturing in order to create multiple finite-conductivity vertical fractures. Several methods for evaluating the productivity of the horiz...Horizontal wells in the anisotropic reservoirs can be stimulated by hydraulic fracturing in order to create multiple finite-conductivity vertical fractures. Several methods for evaluating the productivity of the horizontal wells have been presented in the literature. With such methods, however, it is still difficult to obtain an accurate result. This paper firstly presents the dimensionless conductivity theory of vertical fractures. Then models for calculating the equivalent wellbore radius and the skin factor due to flow convergence to the well bore are proposed after analyzing the steady-state flow in porous reservoirs. By applying the superposition principle to the pressure drop, a new method for evaluating the productivity of horizontal wells intercepted by multiple finite-conductivity fractures is developed. The influence of fracture conductivity and fracture half length on the horizontal well productivity is quantitatively analyzed with a synthetic case. Optimum fracture number and fracture space are further discussed in this study. The results prove that the method outlined here should be useful to design optimum fracturing of horizontal wells.展开更多
This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the ...This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the study were based on the analytical and empirical approaches.Its reliability has been confirmed through comparisons with a commercial software.Using transient data relating to multi-stage hydraulic fractured horizontal wells,it was confirmed that the accuracy of the modified hyperbolic method showed an error of approximately 4%compared to the actual estimated ultimate recovery(EUR).On the basis of the developed model,reliable productivity forecasts have been obtained by analyzing field production data relating to wells in Canada.The EUR was computed as 9.6 Bcf using the modified hyperbolic method.Employing the Pow Law Exponential method,the EUR would be 9.4 Bcf.The models developed in this study will allow in the future integration of new analytical and empirical theories in a relatively readily than commercial models.展开更多
GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon ...GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon with combustion gravimetric method.展开更多
Cupressus gigantca is naturally distrib-uted in the lower-middle reaches of theYaluzangbu River.It’s maximum age canreach up to 1,000 years,diameter at breastheigh (DBH) 400cm and height 45m.The
Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical str...Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical structure model. To build an ISM of a production system, the partial correlation coefficient method is proposed to obtain the adjacency matrix, which can be transformed to ISM. According to estimation of correlation coefficient, the result can give actual variable correlations and eliminate effects of intermediate variables. Furthermore, this paper proposes an effective approach using ISM to analyze the main factors and basic mechanisms that affect the energy consumption in an ethylene production system. The case study shows that the proposed energy consumption analysis method is valid and efficient in improvement of energy efficiency in ethylene production.展开更多
An approach for the economic analysis of chemical product design is proposed. It takes into account of customers' preference on product quality and economic considerations such as pricing, profit, market share, ca...An approach for the economic analysis of chemical product design is proposed. It takes into account of customers' preference on product quality and economic considerations such as pricing, profit, market share, capital investment, and operating cost. The activities needed to support business decision making – identifying product quality, estimating product cost, calculating financial metrics, and performing make–buy analysis – are discussed.The design of a Ganoderma lucidum dietary supplement, a traditional Chinese medicinal(TCM) product, is used to illustrate all the activities in this approach.展开更多
This standard specifies the method summary, reagents, apparatus, sampling, procedure, test results calculation and permissible tolerance of the determination of magnesium oxide by CyDTA volumetric method.
SARP Workshop on risk analysis of agroecological zonation and optimization of crop rotation was held at CNRRI’s research center on 24—27 Oct, 1995. Experts from Philippines, India, China, and IRRI were present in th...SARP Workshop on risk analysis of agroecological zonation and optimization of crop rotation was held at CNRRI’s research center on 24—27 Oct, 1995. Experts from Philippines, India, China, and IRRI were present in the workshop. Participants exchanged the research results on the field of land use, soil erosion. optimization of rice—wheat, rice—peanut, rice—corn cropping system in the different environments, risk analysis of rice based cropping system, nitrogen balance in rice based cropping system with system approach, demonstrated models used in their studies, and discussed the ongoing cooperative research.展开更多
[Objective] This study aimed to isolate an acidophilic fungus and analyze the acidophilic enzymes secreted by this fungus. [Method] A heterotrophic fungus was isolated from the leaching solution of a uranium ore in Ji...[Objective] This study aimed to isolate an acidophilic fungus and analyze the acidophilic enzymes secreted by this fungus. [Method] A heterotrophic fungus was isolated from the leaching solution of a uranium ore in Jiangxi Province using oligotrophic acid selective medium （pH 2.5）, and was named RBS-6. This strain was then identified according to its colony morphology and molecular indicator rDNA-ITS. Finally, the glycoside hydrolases secreted by RBS-6 were analyzed. [Result] This fungus RBS-6 was acidophilic, and grew best at pH4.0. Its rDNA-ITS sequence shared the highest homology （98%） with that of Phialophora sp. CGMCC 3329 （GU 082377）. So it was identified as a fungus of Phialophora sp., and was temporarily named as Phialophora sp. RBS-6. It can produce six glycoside hydrolases, in cluding α-galactosidase glucosidase, β-glucosidase, β-mannanase and β-glucanase. All the enzymes were acidophilic, for which the optimum reaction pH was 3.0-4.0. Among them, β-glucanase exhibited the highest activity at pH 3.5 and 50 ℃; in addition, it was heat-stable as 58% of the enzyme activity was remained after incubation at 50 ℃ for 60 min. [Conclusion] The isolated fungus which was identified as an acidophilic member of Phialophora sp., was a new strain producing acidophilic enzymes. This study supplied new data for the research on Phialophora fungi.展开更多
Carbonate reservoir patterns play an important role in the production performance of oil and gas wells,and it is usually classified through static data analysis which cannot reflect the actual well performance.This pa...Carbonate reservoir patterns play an important role in the production performance of oil and gas wells,and it is usually classified through static data analysis which cannot reflect the actual well performance.This paper takes the Tazhong No.1 gas field in the Tarim Basin,China as an example to investigate the classification of carbonate reservoirs.The classification method mainly combines well test analysis with production analysis—especially the Blasingame type curve method.Based on the characteristics of type curves for well test analysis and the Blasingame method,the relationship between the type curves and reservoir pattern was established.More than 20 wells were analyzed and the reservoirs were classified into 3 major patterns with 7 sub-classes.Furthermore,the classification results were validated by dynamic performance analysis of wells in the Tazhong No.1 gas field.On the basis of the classification results,well stimulation（i.e.water flooding in a single well） was carried out in three volatile-oil wells,and the oil recovery increased by up to 20%.展开更多
One of the important indicators of shale gas reservoir excavation is capacity evaluation,which directly affects whether large-scale shale gas reservoirs can be excavated.Capacity evaluation is the basis of system anal...One of the important indicators of shale gas reservoir excavation is capacity evaluation,which directly affects whether large-scale shale gas reservoirs can be excavated.Capacity evaluation is the basis of system analysis and dynamic prediction.Therefore,it is particularly important to conduct capacity evaluation studies on shale gas horizontal wells.In order to accurately evaluate the horizontal well productivity of shale gas staged fracturing,this paper uses a new method to evaluate the productivity of Fuling shale gas.The new method is aimed at the dynamic difference of horizontal wells and effectively analyzes the massive data,which are factors affecting the productivity of shale gas horizontal wells.According to the pressure system,production dynamic characteristics,well trajectory position,fracturing transformation mode and penetration depth,32 wells were divided into four types.Then,based on the classification,the principal component analysis methods can be used to evaluate the horizontal well productivity of shale gas.The new method of capacity evaluation has improved the accuracy by 10.25%compared with the traditional method,which provides a theoretical basis for guiding the efficient development of the horizontal wells of Fuling shale gas.展开更多
Although mining production depends on various equipments, significant amount of production loss can be attributed a specific equipment or fleet. Bottleneck is defined not only by production loss but also by our satisf...Although mining production depends on various equipments, significant amount of production loss can be attributed a specific equipment or fleet. Bottleneck is defined not only by production loss but also by our satisfaction from the equipment. The user satisfaction could be measured as machine effectiveness.Mining literatures on performance improvement and optimization of equipment operations assert importance of availability, utilization and production performance as key parameters. These three parameters are useful for evaluating effectiveness of equipment. Mine production index(MPI), which can represent the effect of these factors, has been applied for continuous operation in mining. MPI uses Fuzzy Delphi Analytical Hierarchy Process to determine importance of each three parameter for individual equipment. A case study in a Swedish open pit mine was done to evaluate the field application of MPI.The results reveal that crusher is the bottleneck equipment in studied mine. As a methodical approach,an algorithm which uses MPI and detects bottleneck in continuous mining operation has been proposed.展开更多
基金Project supported by the Zhejiang Provincial Natural Science Foundation of China(LQ23E060002)the National Natural Science Foundation of China(51976192)。
文摘The Mn-Ce-Fe mixed oxide(MCFe)was prepared by co-precipitation and the catalytic performance was tested by using 1,2-dichlorobenzene(1,2-DCB)and furan as model molecules of PCDD/F.The effect of O_(2)concentration,SO_(2) and NO on the catalytic activity was studied.At 270℃,the MCFe oxide catalyst presents significant simultaneous removal efficiency of 75.25%and 100%for 1,2-DCB and furan,respectively.Brunauer-Emmett-Teller(BET)method(BET),X-ray diffraction(XRD),scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FTIR),H_2-temperature programmed reduction(H_(2)-TPR),NH_(3)-temperature programmed desorption(NH_3-TPD)and O_(2)-TPD were used to characterize the catalysts before and after the reaction.Competition tests suggest that the oxidation behavior of furan occurred prior to that of 1,2-DCB.According to the intermediate products detected by gas chromatography-mass spectrometry(GC-MS),the by-products include chlorinated hydrocarbons,long-chain hydrocarbons,ketone,etc.Possible catalytic oxidation reaction paths are proposed.
基金supported by the Young Elite Scientist Sponsorship Program by Beijing Association for Science and Technology,China(No.BYESS2023262)the Science Foundation of China University of Petroleum(Beijing),China(No.2462022BJRC004).
文摘Current gas well decline analysis under boundary-dominated flow(BDF)is largely based on the Arps'empirical hyperbolic decline model and the analytical type curve tools associated with pseudo-functions.Due to the nonlinear flow behavior of natural gas,these analysis methods generally require iterative calculations.In this study,the dimensionless gas rate(qg/qgi)is introduced,and an explicit method to determine the average reservoir pressure and the original gas in place(OGIP)for a volumetric gas reservoir is proposed.We show that the dimensionless gas rate in the BDF is only the function of the gas PVT parameters and reservoir pressure.Step-by-step analysis procedures are presented that enable explicit and straightforward estimation of average reservoir pressure and OGIP by straight-line analysis.Compared with current techniques,this methodology avoids the iterative calculation of pseudo-time and pseudo-pressure functions,lowers the multiplicity of type curve analysis,and is applicable in different production situations(constant/variable gas flow rate,constant/variable bottom-hole pressure)with a broad range of applications and ease of use.Reservoir numerical simulation and field examples are thoroughly discussed to highlight the capabilities of the proposed approach.
基金supported in part by the National Science Fund for Distinguished Young Scholars of China(62225303)the National Natural Science Fundation of China(62303039,62433004)+2 种基金the China Postdoctoral Science Foundation(BX20230034,2023M730190)the Fundamental Research Funds for the Central Universities(buctrc202201,QNTD2023-01)the High Performance Computing Platform,College of Information Science and Technology,Beijing University of Chemical Technology
文摘Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.
基金supported by the Jilin Scientific and Technological Development Program(20230202047NC)。
文摘Gastrodia elata Blume has a rich history of use in Asian.However,there is still a need for systematic analysis regarding the relationship and in-depth development between its components and functions.Through comprehensive analysis utilizing databases such as Pub Med,Web of Science,and Google Scholar,the practical components,biological activities,and product development of G.elata have been investigated.It has been found that the main active components of G.elata,such as gastrodin and G.elata polysaccharides,possess functionalities in improving conditions such as epilepsy,hypertension,and osteoporosis.These active components exhibit phenolic hydroxyl groups,molecular weight,conformation,and spatial arrangement,contributing to their enhanced ability to scavenge free radicals.Additionally,G.elata is known to have organic acids and esters,which exhibit potential immune regulatory and antiviral properties.Compounds with multiple acidic functional groups exhibit even more vigorous activity.Steroidal compounds likeβ-sitosterol,due to their presence of alcohol and ketone groups,along with a multi-ring structure,exhibit superior cholesterol-lowering activity.G.elata has already been recognized in the traditional chinese medicine and food homology list,showcasing its potential for development in line with the health demands of the current era.However,challenges regarding quality evaluation,peculiar odor,and the extraction process of the practical components still require immediate attention.Constructing a robust evaluation system and optimizing product processing techniques will be crucial for the future advancement of the G.elata industry.
文摘Horizontal wells in the anisotropic reservoirs can be stimulated by hydraulic fracturing in order to create multiple finite-conductivity vertical fractures. Several methods for evaluating the productivity of the horizontal wells have been presented in the literature. With such methods, however, it is still difficult to obtain an accurate result. This paper firstly presents the dimensionless conductivity theory of vertical fractures. Then models for calculating the equivalent wellbore radius and the skin factor due to flow convergence to the well bore are proposed after analyzing the steady-state flow in porous reservoirs. By applying the superposition principle to the pressure drop, a new method for evaluating the productivity of horizontal wells intercepted by multiple finite-conductivity fractures is developed. The influence of fracture conductivity and fracture half length on the horizontal well productivity is quantitatively analyzed with a synthetic case. Optimum fracture number and fracture space are further discussed in this study. The results prove that the method outlined here should be useful to design optimum fracturing of horizontal wells.
基金supported by the Energy Efficiency&Resources Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20172510102090).
文摘This paper presents the development and application of a production data analysis software that can analyze and forecast the production performance and reservoir properties of shale gas wells.The theories used in the study were based on the analytical and empirical approaches.Its reliability has been confirmed through comparisons with a commercial software.Using transient data relating to multi-stage hydraulic fractured horizontal wells,it was confirmed that the accuracy of the modified hyperbolic method showed an error of approximately 4%compared to the actual estimated ultimate recovery(EUR).On the basis of the developed model,reliable productivity forecasts have been obtained by analyzing field production data relating to wells in Canada.The EUR was computed as 9.6 Bcf using the modified hyperbolic method.Employing the Pow Law Exponential method,the EUR would be 9.4 Bcf.The models developed in this study will allow in the future integration of new analytical and empirical theories in a relatively readily than commercial models.
文摘GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon with combustion gravimetric method.
文摘Cupressus gigantca is naturally distrib-uted in the lower-middle reaches of theYaluzangbu River.It’s maximum age canreach up to 1,000 years,diameter at breastheigh (DBH) 400cm and height 45m.The
基金Supported by the National Natural Science Foundation of China(61374166,6153303)the Doctoral Fund of Ministry of Education of China(20120010110010)the Fundamental Research Funds for the Central Universities(YS1404,JD1413,ZY1502)
文摘Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical structure model. To build an ISM of a production system, the partial correlation coefficient method is proposed to obtain the adjacency matrix, which can be transformed to ISM. According to estimation of correlation coefficient, the result can give actual variable correlations and eliminate effects of intermediate variables. Furthermore, this paper proposes an effective approach using ISM to analyze the main factors and basic mechanisms that affect the energy consumption in an ethylene production system. The case study shows that the proposed energy consumption analysis method is valid and efficient in improvement of energy efficiency in ethylene production.
文摘An approach for the economic analysis of chemical product design is proposed. It takes into account of customers' preference on product quality and economic considerations such as pricing, profit, market share, capital investment, and operating cost. The activities needed to support business decision making – identifying product quality, estimating product cost, calculating financial metrics, and performing make–buy analysis – are discussed.The design of a Ganoderma lucidum dietary supplement, a traditional Chinese medicinal(TCM) product, is used to illustrate all the activities in this approach.
文摘This standard specifies the method summary, reagents, apparatus, sampling, procedure, test results calculation and permissible tolerance of the determination of magnesium oxide by CyDTA volumetric method.
文摘SARP Workshop on risk analysis of agroecological zonation and optimization of crop rotation was held at CNRRI’s research center on 24—27 Oct, 1995. Experts from Philippines, India, China, and IRRI were present in the workshop. Participants exchanged the research results on the field of land use, soil erosion. optimization of rice—wheat, rice—peanut, rice—corn cropping system in the different environments, risk analysis of rice based cropping system, nitrogen balance in rice based cropping system with system approach, demonstrated models used in their studies, and discussed the ongoing cooperative research.
基金Supported by Manufacture - Learning - Research Cooperation Project of Education Department of Jiangxi Province(GJJ09008)Nuclear Power Development Projects [COSTIND, (2009)1230]~~
文摘[Objective] This study aimed to isolate an acidophilic fungus and analyze the acidophilic enzymes secreted by this fungus. [Method] A heterotrophic fungus was isolated from the leaching solution of a uranium ore in Jiangxi Province using oligotrophic acid selective medium （pH 2.5）, and was named RBS-6. This strain was then identified according to its colony morphology and molecular indicator rDNA-ITS. Finally, the glycoside hydrolases secreted by RBS-6 were analyzed. [Result] This fungus RBS-6 was acidophilic, and grew best at pH4.0. Its rDNA-ITS sequence shared the highest homology （98%） with that of Phialophora sp. CGMCC 3329 （GU 082377）. So it was identified as a fungus of Phialophora sp., and was temporarily named as Phialophora sp. RBS-6. It can produce six glycoside hydrolases, in cluding α-galactosidase glucosidase, β-glucosidase, β-mannanase and β-glucanase. All the enzymes were acidophilic, for which the optimum reaction pH was 3.0-4.0. Among them, β-glucanase exhibited the highest activity at pH 3.5 and 50 ℃; in addition, it was heat-stable as 58% of the enzyme activity was remained after incubation at 50 ℃ for 60 min. [Conclusion] The isolated fungus which was identified as an acidophilic member of Phialophora sp., was a new strain producing acidophilic enzymes. This study supplied new data for the research on Phialophora fungi.
基金financial support from"Major Projects about Carbonate Reservoirs of Petrochina (2008E-0610-08)""Young Innovation Fund Project of Research Institute of Petroleum Exploration and Development (2009-A-17-13)"
文摘Carbonate reservoir patterns play an important role in the production performance of oil and gas wells,and it is usually classified through static data analysis which cannot reflect the actual well performance.This paper takes the Tazhong No.1 gas field in the Tarim Basin,China as an example to investigate the classification of carbonate reservoirs.The classification method mainly combines well test analysis with production analysis—especially the Blasingame type curve method.Based on the characteristics of type curves for well test analysis and the Blasingame method,the relationship between the type curves and reservoir pattern was established.More than 20 wells were analyzed and the reservoirs were classified into 3 major patterns with 7 sub-classes.Furthermore,the classification results were validated by dynamic performance analysis of wells in the Tazhong No.1 gas field.On the basis of the classification results,well stimulation（i.e.water flooding in a single well） was carried out in three volatile-oil wells,and the oil recovery increased by up to 20%.
文摘One of the important indicators of shale gas reservoir excavation is capacity evaluation,which directly affects whether large-scale shale gas reservoirs can be excavated.Capacity evaluation is the basis of system analysis and dynamic prediction.Therefore,it is particularly important to conduct capacity evaluation studies on shale gas horizontal wells.In order to accurately evaluate the horizontal well productivity of shale gas staged fracturing,this paper uses a new method to evaluate the productivity of Fuling shale gas.The new method is aimed at the dynamic difference of horizontal wells and effectively analyzes the massive data,which are factors affecting the productivity of shale gas horizontal wells.According to the pressure system,production dynamic characteristics,well trajectory position,fracturing transformation mode and penetration depth,32 wells were divided into four types.Then,based on the classification,the principal component analysis methods can be used to evaluate the horizontal well productivity of shale gas.The new method of capacity evaluation has improved the accuracy by 10.25%compared with the traditional method,which provides a theoretical basis for guiding the efficient development of the horizontal wells of Fuling shale gas.
文摘Although mining production depends on various equipments, significant amount of production loss can be attributed a specific equipment or fleet. Bottleneck is defined not only by production loss but also by our satisfaction from the equipment. The user satisfaction could be measured as machine effectiveness.Mining literatures on performance improvement and optimization of equipment operations assert importance of availability, utilization and production performance as key parameters. These three parameters are useful for evaluating effectiveness of equipment. Mine production index(MPI), which can represent the effect of these factors, has been applied for continuous operation in mining. MPI uses Fuzzy Delphi Analytical Hierarchy Process to determine importance of each three parameter for individual equipment. A case study in a Swedish open pit mine was done to evaluate the field application of MPI.The results reveal that crusher is the bottleneck equipment in studied mine. As a methodical approach,an algorithm which uses MPI and detects bottleneck in continuous mining operation has been proposed.
