Correction to:Nano-Micro Letters(2025)17:191 https://doi.org/10.1007/s40820-025-01702-7 Following the publication of the original article[1],the authors reported an error in Fig.3(b),and the figure legend was reversed...Correction to:Nano-Micro Letters(2025)17:191 https://doi.org/10.1007/s40820-025-01702-7 Following the publication of the original article[1],the authors reported an error in Fig.3(b),and the figure legend was reversed.The correct Fig.3 has been provided in this orrection.展开更多
Stamping process,which is widely used in automobile,aerospace,machine-building industries,and etc.,is a creative process needing time and experiences.The lead time is mainly spent on stamping die design and manufactur...Stamping process,which is widely used in automobile,aerospace,machine-building industries,and etc.,is a creative process needing time and experiences.The lead time is mainly spent on stamping die design and manufacturing.As the ba- sis of die design,process design is a non-linearity and creative process,which can be solved by using the fuzzy synthetic evaluation. In this paper,the potential o f fuzzy synthetic evaluation for dealing with stamping process design was explored.The influencing factor set,factor weight set,evaluation set,single factor fuzzy evaluation matrix,and fuzzy synthetic evaluation scheme were studied.Finally,the washer part,considering forming equipment,part dimensions and other factors,was selected to testify the evaluation process.展开更多
In order to enhance the NC programming efficiency and quality of aircraft structural parts （ASPs）, an intelligent NC programming pattern driven by process schemes is presented. In this pattern, the NC machining cell...In order to enhance the NC programming efficiency and quality of aircraft structural parts （ASPs）, an intelligent NC programming pattern driven by process schemes is presented. In this pattern, the NC machining cell is the minimal organizational structure in the technological process, consisting of an operation machining volume cell, and the type and parameters of the machining operation. After the machining cell construction, the final NC program can be easily obtained in a CAD/CAM system by instantiating the machining operation for each machining cell. Accordingly, how to automatically establish the machining cells is a key issue in intelligent NC program- ming. On the basis of the NC machining craft of ASP, the paper aims to make an in-depth research on this issue. Firstly, some new terms about the residual volume and the machinable volume are defined, and then, the technological process is modeled with a process scheme. Secondly, the approach to building the machining cells is introduced, in which real-time complement machining is mainly considered to avoid interference and overcutting. Thirdly, the implementing algorithm is designed and applied to the Intelligent NC Programming System of ASP. Finally, the developed algorithm is validated through two case studies.展开更多
This paper uses a Modified Soil-Plant-Atmosphere Scheme (MSPAS) to study the interaction between land surface and atmospheric boundary layer processes. The scheme is composed of two main parts: atmospheric boundary la...This paper uses a Modified Soil-Plant-Atmosphere Scheme (MSPAS) to study the interaction between land surface and atmospheric boundary layer processes. The scheme is composed of two main parts: atmospheric boundary layer processes and land surface processes. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feasibility of the model is well proved in this paper. The numerical simulation results from MSPAS show good agreement with reality. The scheme is used to obtain reasonable simulations for diurnal variations of heat balance, potential temperature of boundary layer, and wind field, and spatial distributions of temperature, specific humidity, vertical velocity, turbulence kinetic energy, and turbulence exchange coefficient over desert and oasis. In addition, MSPAS is used to simulate the interaction between desert and oasis at night, and again it obtains reasonable results. This indicates that MSPAS can be used to study the interaction between land surface processes and the atmospheric boundary layer over various underlying surfaces and can be extended for regional climate and numerical weather prediction study.展开更多
In this paper, we propose numerical schemes for stochastic differential equations driven by G-Lévy process under the G-expectation framework. By using G-Itôformula and G-expectation property, we propose ...In this paper, we propose numerical schemes for stochastic differential equations driven by G-Lévy process under the G-expectation framework. By using G-Itôformula and G-expectation property, we propose Euler scheme and Milstein scheme which have order-1.0 convergence rate. And two numerical experiments including Ornstein-Uhlenbeck and Black-Scholes cases are given.展开更多
基金supported in part by STI 2030-Major Projects under Grant 2022ZD0209200in part by Beijing Natural Science Foundation-Xiaomi Innovation Joint Fund (L233009)+4 种基金in part by National Natural Science Foundation of China under Grant No. 62374099in part by the Tsinghua-Toyota Joint Research Fundin part by the Daikin Tsinghua Union Programin part by Independent Research Program of School of Integrated Circuits,Tsinghua Universitysponsored by CIE-Tencent Robotics X Rhino-Bird Focused Research Program
文摘Correction to:Nano-Micro Letters(2025)17:191 https://doi.org/10.1007/s40820-025-01702-7 Following the publication of the original article[1],the authors reported an error in Fig.3(b),and the figure legend was reversed.The correct Fig.3 has been provided in this orrection.
文摘Stamping process,which is widely used in automobile,aerospace,machine-building industries,and etc.,is a creative process needing time and experiences.The lead time is mainly spent on stamping die design and manufacturing.As the ba- sis of die design,process design is a non-linearity and creative process,which can be solved by using the fuzzy synthetic evaluation. In this paper,the potential o f fuzzy synthetic evaluation for dealing with stamping process design was explored.The influencing factor set,factor weight set,evaluation set,single factor fuzzy evaluation matrix,and fuzzy synthetic evaluation scheme were studied.Finally,the washer part,considering forming equipment,part dimensions and other factors,was selected to testify the evaluation process.
基金supported by National Science and Technology Major Project (No.2012ZX04010051)
文摘In order to enhance the NC programming efficiency and quality of aircraft structural parts （ASPs）, an intelligent NC programming pattern driven by process schemes is presented. In this pattern, the NC machining cell is the minimal organizational structure in the technological process, consisting of an operation machining volume cell, and the type and parameters of the machining operation. After the machining cell construction, the final NC program can be easily obtained in a CAD/CAM system by instantiating the machining operation for each machining cell. Accordingly, how to automatically establish the machining cells is a key issue in intelligent NC program- ming. On the basis of the NC machining craft of ASP, the paper aims to make an in-depth research on this issue. Firstly, some new terms about the residual volume and the machinable volume are defined, and then, the technological process is modeled with a process scheme. Secondly, the approach to building the machining cells is introduced, in which real-time complement machining is mainly considered to avoid interference and overcutting. Thirdly, the implementing algorithm is designed and applied to the Intelligent NC Programming System of ASP. Finally, the developed algorithm is validated through two case studies.
基金supported by the National Natural Science Foundation of China (Grant No.40275004)the State Key Laboratory of Atmosphere Physics and Chemistry,and the City University of Hong Kong(Grant No.8780046)the City University of Hong Kong Strategic Research(Grant No.7001038)
文摘This paper uses a Modified Soil-Plant-Atmosphere Scheme (MSPAS) to study the interaction between land surface and atmospheric boundary layer processes. The scheme is composed of two main parts: atmospheric boundary layer processes and land surface processes. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feasibility of the model is well proved in this paper. The numerical simulation results from MSPAS show good agreement with reality. The scheme is used to obtain reasonable simulations for diurnal variations of heat balance, potential temperature of boundary layer, and wind field, and spatial distributions of temperature, specific humidity, vertical velocity, turbulence kinetic energy, and turbulence exchange coefficient over desert and oasis. In addition, MSPAS is used to simulate the interaction between desert and oasis at night, and again it obtains reasonable results. This indicates that MSPAS can be used to study the interaction between land surface processes and the atmospheric boundary layer over various underlying surfaces and can be extended for regional climate and numerical weather prediction study.
文摘In this paper, we propose numerical schemes for stochastic differential equations driven by G-Lévy process under the G-expectation framework. By using G-Itôformula and G-expectation property, we propose Euler scheme and Milstein scheme which have order-1.0 convergence rate. And two numerical experiments including Ornstein-Uhlenbeck and Black-Scholes cases are given.
